PEK3 GmbH Reproduction, distribution, republication and/or retransmission are prohibited unless the prior written permission of PEK3 GmbH has been

Transcription

1 EASYTUBE

2 PEK3 GmbH Reproduction, distribution, republication and/or retransmission are prohibited unless the prior written permission of PEK3 GmbH has been obtained.

3 easytube Content ABOUT EASYTUBE 2 PIPES 5 PIPE PROTECTORS 11 METAL JOINTS 13 JOINT COMBINATIONS 17 ROLLER TRACKS 31 ROLLER TRACK GUIDES 35 MOUNTING BRACKETS 37 SQUARE FRAMES 41 MONORAIL 43 METAL ACCESSORIES 45 PLASTIC ACCESSORIES 49 PLASTIC PROFILES 53 WHEELS & CASTORS 55 FEET 59 CAPS & BUSHING NUTS 61 FASTENERS 63 CUSTOMISING 67 LEVEL ADJUSTMENT 69 HARDWARE TOOLS 71 SOFTWARE TOOLS 73 1

4 easytube THE ONLY LIMIT IS YOUR IMAGINATION! PEK3 EASYTUBE offers a range of modular components that enables you to design and build a variety of versatile structures to aid storage, assembly, manufacturing and other operations. PEK3 EASYTUBE provides individual solutions for Dynamic Flow Racks Assembly Lines Cell Feed Systems FIFO Picking Systems Shelving and Racking Carts, Trucks and Trolleys Assembly and Packing Benches Kittng Sytems for Parts Notice Boards, Sign Holders, Safety Signs Conveyors PEK3 EASYTUBE is a multifunctional aid to concept engineering, allowing continuous and cost-effective improvement to your designs. Available in standard and custom colour finishing, the pipes and joints allow speedy realisation of creative solutions for assembly lines, warehouses, logistics operations, offces, laboratories, schools, hospitals, D.I.Y. stores, garden centres in fact, almost everywhere! Know how, creativity, flexibility and the highest quality service and products are the base for our position on the European market. For us, a customer s requirements are a constant challenge to improve our internal systems to provide faster, better and more competitive service. From order confirmation to prompt and correct delivery including service back-up, you can be sure of first-rate technical support and quality proven products. We are not only a supplier of goods but also want to provide you with the necessary back-up from start to finish in your procurement and manufacturing operations. Our staff ensure that your projects are properly supported from A to Z. Competent technical advice is at your disposal, via telephone or on location. Wherever, whenever you need it. Because your success is our success. 2

5 easytube SALES & SERVICE OFFICES OFFICE GERMANY PEK3 GmbH Hans-Urmiller-Ring 24 D Wolfratshausen Telefon Telefax OFFICE MOROCCO PEK3 SARL ILOT 26B, Bâtiment C1 Zone Franche d Exportation Tanger Telefon MA Tanger easytube.ma@pek3.com OFFICE HUNGARY PEK3 ELECTROC Kft. H-1103 Budapest Gyömröi út. 150 Telefon Telefax easytube.hu@pek3.com 3

6 4

7 easytube Pipes Pipes 5

8 easytube PIPES STAINLESS STEEL PIPES Superior resistance to oil and chemicals Environmentally friendly Suitable for ESD applications and for use in clean rooms Complies with the requirements of EN: Available wall thickness: 1.2 mm Pipes PLASTIC COATED PIPES Cost effective and durable Wide range of colours available; special colours on request Available in ESD execution (black) Rust inhibitor applied to inner surface for extended lifetime cycle Available wall thickness: 1,0mm and 2,0mm POWDER COATED PIPES Wear resistant, reusable and fully recyclable Available in a wide range of colours and in ESD execution (black), special colours on request Corrosion resistant, high resistance to oil and chemicals, solvent and bleaching Non-flammable surface Available wall thickness: 1,2mm 6

9 easytube PIPES COLOUR CHART FOR PLASTIC COATED AND POWDER COATED PIPES IV GR RE DB IVORY GREEN RED DARK BLUE LB LG DG LIGHT BLUE LIGHT GREY DARK GREY BLACK EB WH YE BLACK ESD WHITE YELLOW OTHER COLOURS ON REQUEST WALL THICKNESSES 1,0 mm 1,2 mm 2,0 mm STAINLESS STEEL PIPE PIPES POWDER COATED PIPE PLASTIC COATED PIPE TYPES OF PIPES STAINLESS STEEL POWDER COATED PLASTIC COATED STANDARD PIPE SLIDE PIPE 7

10 easytube PIPES CODING SYSTEM FOR PIPES CP-2810-X CP SP = Plastic Pipe PIPE = Plastic Slide Pipe ECP = Plastic Pipe (ESD) ESP = Plastic Slide Pipe (ESD) PP = Powder Coated Pipe EPP = Powder Coated Pipe (ESD) SSP = Stainless Steel Pipe Example: Plastic coated pipe, dark blue, Ø 28 x t 1,0 = CP2810-DB Other colours on request STEEL THICKNESS 10 = t 1,0 12 = t 1,2 20 = t 2,0 COLOUR CODE IV = Ivory GR = Green DB = Dark Blue LB = Light Blue LG = Light Grey DG = Dunkel Grau = Black RE = Red YE = Yellow WH = White EB = Black ESD PIPES CUTTING PIPE Scale: mm 8

11 easytube Pipes MAXIMUM LOAD LIMITS Overall length (mm) Load (kg) Pipes Pipe Overall Length (mm) Permanent Deformation (mm) Total Bending (mm) Point Load (kg) evenly distributed load (kg) SSP SSP SSP SSP Tested by Technical University Munich and SVUM a.s. Research Institute for Materials, Prague 9

12 easytube Pipes MAXIMUM LOAD LIMITS Pipe Overall Length (mm) Permanent Deformation (mm) Total Bending (mm) Point Load (kg) evenly distributed load (kg) CP CP CP CP CP Pipes CP CP CP PP PP PP PP Tested by Technical University Munich and SVUM a.s. Research Institute for Materials, Prague 10

13 easytube Pipe Protectors Pipe Protectors 11

14 easytube Pipe Protectors J-I JPT-48 HST-28.0 /-32.0 YE YE SHRINK TUBING Pipe Protectors 12

15 easytube MEtal Joints Metal Joints 13

16 easytube MEtal Joints E-1 E-1C E-2 E-3 E-4 E-4A Metal Joints E-6 E-6C E-7A E-7B E-7C E-8 E-9 E-11 E-12 14

17 easytube MEtal Joints E-13A E-13B E-14 E-15A E-15B E-15CL E-15CR E-16 E-17 Metal Joints E-18 E-21 E-22 FOR MOUNTING OVER STANDARD JOINTS E-1L E-4L 15

18 16

19 Joint Combinations easytube Joint Combinations 17

20 easytube Joint Combinations 2*E-1 1*M *TN06 Joint Combinations 1*E-2 2*E-1C 1*E-3 1*M *TN06 2*M *TN06 2*E-2 1*E-4 3*M *TN06 2*E-4 2*M *TN06 18

21 easytube Joint Combinations E-1 is the main structural joint. Two joints allow the combination of two pipes at a right angle. E-1 is the main assembly joint used in building many different structures. It is recommended to keep enough of this basic joint in stock. E-1C is used when boxes or similar slide along the pipe, where a combination of two joints type E-1 would interfere with this sliding. E-1C is used in connection with guides or slide pipe or similar. Do not use E-1C as a substitute for E-1. The combination of E-2 and E-3 is used to create a right angle, to ensure that a structure is square. It is a very important, very strong joint assembly. If this combination is not used on at least two corners of an assembly then the structure may become unstable. Joint Combinations This combination of E-4 and E-2 is often used in larger assemblies where there are several sections. It ensures that all parts are square and stable. A joint combination consisting of two E-4 joints is the best way to asemble pipes crossing each other. Typically, the continuous pipe is used for the vertical, the pipe sections for the horizontal. 19

22 easytube Joint Combinations 2*E-4A 1*GAP-12 2*M *TN06 WH Joint Combinations 4*E-2 2*E-6 4*M *TN06 1*M *TN06 2*E-6C 1*M *TN06 2*E-7A 2*E-7B 2*M *TN06 20

23 easytube Joint Combinations Two E-4A joints and a nylon sleeve build a hinge, for example for a cupboard. Four E-2 joints are sometimes used at the centre of a larger assembly. It is a convenient and secure way to fix converging pipes. Two E-6 joints form a crossover joint assembly. This not a main structural joint. It lacks the strength of the combination made of two E-4 joints but is often more convenient for certain purposes. It is often used to support panels or a work surface. Joint Combinations Similarly to E-1C, E-6C is used in connection with guides or slide pipe, it provides a crossover possibility without the joint interfering with the box or container. It is of course not as secure as E-6 so should not be used as a structural joint. The combination of E-7A and E-7B makes a variable angle joint, allowing one pipe to be joined to the middle of another and the angle to be varied. This provides flexibility to the structure. Diagonal bracing is one area where this is commonly used. Additionally, two E-7A parts are commonly used to secure panels. 21

24 easytube Joint Combinations 2*E-7C 2*E-7B 3*M *TN06 Joint Combinations 2*E-8 2*E-9 1*M *TN06 1*M *TN06 2*E-11 2*M *TN06 2*E-12 1*GAP-12 1*M *TN06 WH 22

25 easytube Joint Combinations Combining E-7B and E-7C results in a joint assembly which allows two pipes to be joined end to end at variable angles. This can be combined with E-12 joint assemblies at the other ends to make a very flexible, mobile part of the structure. Combining two E-8 joints is very strong way to join two parallel pipes. This may be to join two structures together or perhaps if a horizontal span needs to be longer than normal and two pipes must be used then the pipes should be joined using this. The E-9 double joint is a way to fix two pipes parallel on one other. It is often used in combination with E-8 joints. Joint Combinations E -11 is often used for handles or grips, many other cases where a rounded corner is desirable either for practical or aesthetic reasons. The tops of work surfaces may be finished in this way. E-12 is a hinge joint. It allows one part to swivel around the other. This may be used to assemble a door, gate or barrier. A roller track can be assembled with a section which lifts to allow passage. 23

26 easytube Joint Combinations 1*E-13A 1*E-13B 1*M *TN06 Joint Combinations 2*E-14 1*E-15A 4*E-7B 1*E-15B 4*M *TN06 1*M *TN06 1*E-15B 1*E-15CL / E-15CR 1*M *TN06 2*E-16 24

27 easytube Joint Combinations E-13A and E-13B combine to form a strong 45 angle joint. The main use is in diagonal bracing where it is cheaper and stronger than joints made with E-7A and E-7B. E-14 is often used to combine two joint assemblies made with E-7A and E-7B or two E-13A and E-13B at the head of diagonal bracing sections. Joint combinations of E-15A and E-15B are excellent for fixing panels or work surfaces to structures. The panel is then fixed securely on top of the pipe. This joint can be used to fix pipes to walls or to aluminium profile. Be sure to put the nut in the recess, otherwise disassembly is more diffcult. Joint Combinations This joint combination is used to fix shelves to a vertical pipe. Naturally, there is a left and a right combination using either E-15CL or E-15CR. Two E-16 joints provide a simple method of fixing a panel at halfway across the thickness of the pipe. This combination is often used when the board must be within the structure rather than above it. 25

28 easytube Joint Combinations 2*E-17 1*GAP-12 1*M *TN06 WH Joint Combinations 2*E-18 2*GAP-12 WH 2*E-21 1*M *TN06 1*M *TN06 2*E-22 1*M *TN06 1*E-21 1*E-22 1*M *TN06 26

29 easytube Joint Combinations This joint combination is used to join two parallel pipes. One pipe is fixed, the other can turn in the joint. This is used to make a gate or barrier, or as above in the case of E-12, a section of a structure can lift to provide access or passage. A joint combination made with these parts is similar to the E-17 combination, but both pipes can turn. This is the best way to combine aluminium profile and pipe system. This joint can of course also be used to as a vertical support for a work surface or to fix the structure to the wall or floor. Joint Combinations This combination allows the pipe system to be fixed to the corner or end of aluminium profile or to the side of a wall or another structure. By combining E-21 and E-22 it is possible to fix the pipe joint assembly to two sides of aluminium profile, to a beam or a wall. 27

30 easytube Joint Combinations 2*E-1-L 1*M *TN06 Joint Combinations 2*E-4-L 1*M *TN06 28

31 easytube Joint Combinations This joint combination is similar to the standard E-1 joint combination but can be mounted over a joint to save space. This joint combination is similar to the standard E-4 joint combination but can be mounted over a joint to save space. Joint Combinations 29

32 easytube Joint Combinations MAXIMUM LOAD IN X AND Y AXES ON COMBINED JOINTS Torque: 14 Nm Joint Combinations ES-1 ES-2 ES-3 ES-4 Schellen Joint Set Z-1(kg) Y-1(kg) Y-2(kg) X-1(kg) ES-1 Stainless Steel ES-1 Powder Coated ES-1 Plastic Coated ES-2 Stainless Steel ES-2 Powder Coated ES-2 Plastic Coated ES-3 Stainless Steel ES-3 Powder Coated ES-3 Plastic Coated ES-4 Stainless Steel ES-4 Powder Coated ES-4 Plastic Coated Tested by Technical University Munich and SVUM a.s. Research Institute for Materials, Prague 30

33 easytube Roller Tracks Roller Tracks 31

34 easytube Roller Tracks RT-40B RT-40B-ESD RT-40B-Q LOW NOISE RT-40B-Q-ESD RT-40C RT-40C-ESD Roller Tracks LOW NOISE RT-40C-Q LOW NOISE RT-40C-Q-ESD LOW NOISE RT-40S RT-40S-ESD RT-60B RT-60B-ESD RT-60S RT-60S-ESD 32

35 easytube Roller Tracks CURVED ROLLER TRACK ITEM RS-300 (T1) RS-300 (T2) RS-400 (T1) RS-400 (T2) RS-600 (T1) RS-600 (T2) DESCRIPTION Curved roller track, 300mm length, Roller supports at both ends Curved roller track, 300mm length, Roller supports only at one (outer) end Curved roller track, 400mm length Roller supports at both ends Curved roller track, 400mm length Roller supports only at one (outer) end Curved roller track, 600mm length Roller supports at both ends Curved roller track, 600mm length Roller supports only at one (outer) end For a 90 curve min. 5 x RS type 1 and 4 x RS type 2 are required. BALL TRANSFER UT ITEM BT-1 BT-2 DESCRIPTION 48 x 32 x 21mm (LxBxH) 70 x 50 x 32mm (LxBxH) Type 1 Type 2 Roller Tracks SPECIFICATION *Specification in mm ROLLER TRACK LOAD CAPACITY (kg-f) ROLLER DIAMETER (mm)* SHAFT DIAMETER (mm)* ROLLER PITCH (mm)* RT-40B /-ESD/Q RT-40C /-ESD RT-40CQ /-ESD RT-40S /-ESD RT-60B /-ESD RT-60S /-ESD *Various other Roller tracks on request Galvanised Steel (SPCC) / PE 33

36 34

37 easytube Roller Track Guides Roller Track Guides 35

38 easytube Roller Track Guides RTG-1 RTG-2 RTG-3 GY IV GY IV GY IV SP-B Roller Track Guides Separator ROLLER TRACK BRAKE EWS-A FOR RT-40B EWS-B FOR RT-40C EWS-D FOR RT-40S / RT-60S 36

39 easytube Mounting Brackets Mounting Brackets 37

40 easytube Mounting Brackets FOR CLAMPING 40MM ROLLER TRACK TO PIPE (28MM) GP-AR GP-B GP-C GP-C2 GP-D GP-E Mounting Brackets GP-F GP-G GP-HR GP-JR GP-M GP-I 38

41 easytube Mounting Brackets FOR CLAMPING 40MM ROLLER TRACK OVER JOINTS GP-ARL GP-BL GP-DL GP-FL GP-GL FOR CLAMPING 60MM ROLLER TRACK TO PIPE (28MM) GP-A60 GP-B60 GP-C60 LOW NOISE Mounting Brackets GP-C260 GP-D60 GP-M60 FOR CLAMPING 60MM ROLLER TRACK OVER JOINTS GP-AL60 GP-BL60 39

42 easytube Mounting Brackets FOR APPLICATIONS USING PIPE GS-A GS-B GS-C GS-D PS-A PS-B Mounting Brackets TILT BAR ITEM TB-300 TB-400 DESCRIPTION Tilt Bar, 300mm length Tilt Bar, 400mm length 40

43 easytube Square Frames Square Frames Vierkantrohre 41

44 easytube Square Frames SQF-3535-DB For some applications a rigid frame is necessary - for example when a forklift is used to lift it or when it is part of a train and towed at relatively high speed. In these and similar cases we suggest the use of our square frame system as a base. It is of course modular, the components are made of high grade welded steel and are easily combined with the pipes and joints to form a hybrid system which is at the same time flexible, strong and easily modified. SQF-CP SQF-II SQF-II-2 Square Frames SQF-CP-L SQF-CP-R SQF-L SQF-LP SQF-SG-R SQF-T SQF-TP SQF-U SQF-X 42

45 easytube Monorail Monorail 43

46 easytube Monorail MR-2 MR-3 MR-A50 MR-A100 MR-A150 MR-A200 Monorail GS

47 easytube Metal Accessoiries MEtal Accessoiries 45

48 easytube Metal Accessoiries PC-A PC-A1 PC-B PC-C PC-D P-CON-A MEtal Accessoiries P-CON-B FOR CP-2810 PH-A FOR SSP-2812 PH-B COLOUR WH CM-A CM-B BH-A BH-B HOOK-1 46

49 easytube Metal Accessoiries TH-08L DIS-01 FH-A GY SEMI-AUTOMATIC DISCHARGING SYSTEM TRAILER SET TH50Y-A CH-2010 F-200 WH SLIDE RAIL ITEM SR-310 SR-350 SR-400 SPRAY CAN HOLDER DESCRIPTION Slide Rail 310mm Length Slide Rail 350mm Length Slide Rail 400mm Length FORKLIFT GUIDE MEtal Accessoiries 47

50 48

51 easytube Plastic Accessoiries Plastic Accessoiries 49

52 easytube Plastic Accessoiries GAP-06 GAP-07 GAP-08 IV GY EB IV GY EB IV GY EB GAP-11 GAP-12 GAP-15 Plastic Accessoiries IV GY EB WH GY GAP-17 GAP-20 GAP-49 IV GY EB IV GY EB IV GY EB LA-B LA-C LA-D 420*297mm 300*210mm 150*60mm LA-S 80*120mm 50

53 easytube Plastic Accessoiries NP-150 NP-250 NP *54mm 250*54mm 1000*54mm ORDER-BOXES ITEM DESCRIPTION OB-3010 Order-Box 150 x 96 x 130mm OB-3011 Order-Box 121 x 85 x 76mm OB-3012 Order-Box 160 x 185 x 125mm OB-3013 Order-Box 150 x 90 x 80mm Plastic Accessoiries 51

54 Kunststoff-Profile 52

55 easytube Plastic Profiles Plastic Profiles 53

56 easytube Plastic Profiles L-TYP ITEM AL-1-LG DESCRIPTION 30 x 50 x 3.3mm, grey, 4m long AL-5-LG 50 x 50 x 5mm, grey 4m long Plastic Profiles T-TYP ITEM AT-1-LG U-TYP ITEM AU-1-LG DESCRIPTION 100 x 55 x 4mm, grey, 4m long DESCRIPTION 36 x 36 x 3mm, grey, 4m long PIPE COVER ITEM DESCRIPTION PC-1-IV Pipe Cover, ivory, 4m long CABLE DUCT ITEM CD-A DESCRIPTION Cable Duct, ivory, 3m long CD-B Cable Duct, ivory, 3m long 54

57 easytube Wheels & Castors Wheels & Castors 55

58 easytube Wheels & Castors Wheels & Castors THREAD TYPE ITEM HEIGHT DIAMETER DYNAMIC LOAD TT-75-S 100mm 75mm 75kg 150kg TT-75-S-E 100mm 75mm 55kg 110kg TT-75-S-B 100mm 75mm 75kg 150kg TT-75-S-B-E 100mm 75mm 55kg 110kg TT-100-S 135mm 100mm 100kg 200kg TT-100-S-E 135mm 100mm 80kg 160kg TT-100-S-B 135mm 100mm 100kg 200kg TT-100-S-B-E 135mm 100mm 80kg 160kg THREAD TYPE High precision cone ball-bearing STATIC LOAD RIGID SWIVEL BRAKE ESD As well as the standard products shown here, PEK3 supplies very many special castors for higher speeds, heavier loads or special applications. Please contact us to ensure that you receive the castors most suited to your construction. PLATE TYPE 56

59 easytube Wheels & Castors PLATE TYPE (STANDARD) ITEM HEIGHT DIAMETER DYNAMIC LOAD PT-100-R 135mm 100mm 100kg 200kg PT-100-R-E 135mm 100mm 80kg 160kg PT-100-S 100mm 100mm 100kg 200kg PT-100-S-E 100mm 100mm 80kg 160kg PT-100-S-B 135mm 100mm 100kg 200kg PT-100-S-B-E 135mm 100mm 80kg 160kg PT-125-R 160mm 125mm 100kg 200kg PT-125-R-E 160mm 125mm 100kg 200kg PT-125-S 160mm 125mm 100kg 200kg PT-125-S-E 160mm 125mm 100kg 200kg PT-125-S-B 160mm 125mm 100kg 200kg PT-125-S-B-E 160mm 125mm 100kg 200kg PT-160-R 200mm 160mm 350kg 700kg PT-160-S 200mm 160mm 350kg 700kg PT-160-S-B 200mm 160mm 350kg 700kg High precision cone ball-bearing STATIC LOAD RIGID SWIVEL BRAKE ESD ONLY FOR USE WITH SQUARE FRAME Wheels & Castors ATTACHING STRIPS FOR PLATE TYPE WHEELS CM-100 CM-200 CM-300 MCP-AL MCP-AR 57

60 *EASYTUBE application with pneumatic system 58

61 easytube Feet Feet 59

62 easytube Feet AD-32-M AD-32-RP AD-50-M ACCESSORIES AD-32-M AD-50-MH AD-SM AD-SMS Feet AD-SMB AD-SMR CAP-02-R 60

63 easytube Caps & Bushing Nuts Caps & Bushing Nuts 61

64 easytube Caps & Bushing Nuts CAP-01- CAP-01-CR CAP-02-R PLASTIC END CAP, FITS ALL PIPES PLASTIC END CAP, CHROME PLATED RUBBER OUTER CAP CAP-03-GY / -IV CAP-03-EB Caps & Bushing Nuts PLASTIC OUTER CAP BUSHINGS ITEM BS-2810-B BS-2810-F BS-2812-B BS-2820-B DESCRIPTION For Plastic Coated Pipe t = 1.0mm, Thread M12 For Plastic Coated Pipe t = 1.0mm, Thread M10 For Stainless Steel Pipe t = 1.2mm, Thread M12 For Plastic Coated Pipe t = 2.0mm, Thread M12 PLASTIC OUTER CAP, ESD 62

65 easytube Fasteners Fasteners 63

66 easytube Fasteners BOLTS ITEM M0625- DESCRIPTION M6 bolt, 25mm, black finished steel M0625-WH M6 bolt, 25mm, galvanised white steel M0610- M6 bolt, 10mm, black finished steel M0610-WH M6 bolt, 10mm, galvanised white steel M835-WH M8 bolt, 35mm, galvanised white steel Fasteners M12-WH SCREWS ITEM SC-1 M12 bolt, 25mm, galvanised white steel DESCRIPTION Self cuttng screw, 3.5 x 13mm, x-head, for use with metal SC-2 Self cuttng screw, 4.0 x 20mm, x-head, for use with wood 64

67 easytube Fasteners NUTS ITEM TN06- DESCRIPTION T-Nut, M6, black finished steel TN06-WH T-Nut, M6, galvanised white steel TN06L- T-Nut, M6, self locking, black finished steel TN06L-WH T-Nut, M6, self locking, galvanised white steel NN08-WH Nut, M8, galvanised white steel with nylon insert N12-WH WASHERS ITEM Nut, M12, galvanised white steel DESCRIPTION Fasteners PW08-WH M8 Flat washer PW12-WH M12 Flat washer SW08-WH M8 Spring washer SW12-WH M12 Spring washer 65

68 66

69 easytube Customising Customising 67

70 easytube Customising WORK SURFACES PEK3 EASYTUBE offer work surfaces made-to-measure in a wide variety of materials such as wood, plastic board, various metals or plastic coated surfaces in different colours, either standard finish or conforming to ESD requirements. CLADDING Polypropylene in various colours and either standard or ESD conformal is an ideal material. In some cases - for example where a soft finish is required to avoid scratching a very sensitive surface - we supply a cloth covered polypropylene cellular sheeting material. This can be supplied either as sheet, cut to size or assembled on the rack. Customising PVC FABRIC is supplied cut to size and welded to your specifications or design for rolling cart covers, bags or sheeting for workstations or similar. Transparent windows and velcro fasteners can be fitted according to your requirements. 68

71 easytube Level Adjustment Level Adjustment 69

72 easytube Level Adjustment It is sometimes desirable to be able to alter the working height of a packing table or a workbench. Other applications include raising gates in roller tracks, carts with adjustable levels etc. PEK3 offers a range of options suitable for every pocket. These can be operated electrically or by means of a hand crank. Level Adjustment 70

73 easytube Hardware Tools Hardware Tools 71

74 easytube Hardware Tools PCT-3 REG-1 TM-1 PIPE CUTTER DEBURRING TOOL TAPE MEASSURE 5m AK-1 SAW-2 IW-1 Hardware Tools ALLEN KEY 5mm BAND SAW IMPACT WRENCH 72

75 easytube Software Tools Pre-cut Optimisation Pipe Bending Under Load CAD-Library Software Tools 73

76 easytube Software Tools Many customers have expressed the wish to design their structures in CAD form so that the identical racks can be built later to the same specification. In response to this, PEK3 has generated a complete 3D CAD library of all parts in Solid Works and Google SketchUp. These libraries are available to customers upon request. We provide a CD with the library in various formats to those customers needing this service. This enables various structures to be generated in CAD with exact measurements, the assemblies can be viewed from all angles, turned and stressed to see the effects of load on the structure and on the parts. In this way users of PEK3 EASTUBE are sure to respect the requirements of production and of the safety offcers. On our website (easytube.pek3.com) we also provide a free of charge software tool for optimisation of cuttng pipes and roller tracks. Software Tools This enables customers to enter the number and dimensions of pipes required and to obtain a cuttng list to reduce waste to a minimum. 74

77 easytube Legend EB GY IV WH YE GR RE DB LB LG DG black ESD black grey ivory nickel plated white yellow green red dark blue light blue light grey dark grey Catalogue EN PEK3 Errors and omissions excepted. We retain the right to change design and applications, photographs and drawings in line with our continuous improvement policy.

78 EASYTUBE pek3.com OFFICE MOROCCO PEK3 SARL Ilôt 14, Lot n 1 Zone Franche d Exportation Tanger Telephone MA Tanger easytube.ma@pek3.com OFFICE GERMANY PEK3 GmbH Hans-Urmiller-Ring 24 D Wolfratshausen Telephone Telefax easytube.de@pek3.com OFFICE HUNGARY PEK3 ELECTROC Kft. H-1103 Budapest Gyömröi út. 150 Telephone Telefax easytube.hu@pek3.com