Nominal dimension: mm Width: mm Height: 350 mm (400 mm from lower edge of the desk)

Transcription

1 ACCESSORIES Our practical accessories and office tools can be arranged to match our Panel collection - Bene's organisational and screening elements. The extensive range of accessories allows for customising and organising of a workstation - and within direct reach as well. The collection ranges from visual screening elements, CPU and screen mounts to storage compartments and trays to ensure an orderly workspace, and helpful magnetic and fabric pin boards to bring some added colour. The highly sophisticated organsation rail system ensures that all Bene accessories can be integrated with our panels, making them truly multi. 1

2 TABLE ADD-ON ELEMENTS Modesty panels For the provision of visual screening and/or upgrading of free-standing workstations. The sliding panels can be attached to desks in the Workstation and Consult ranges. Modesty panels are available it the following materials: Chipboard Material thickness 16 mm Assembly flush to the rear edge of the desk, to universal adapters or shortened to frames. With Filo desk systems and angled desks in the Workstation and Consult ranges, the fronts are mitre cut and joined to each other by means of connection fittings. Steel plate, perforated Strength of material 2 mm Assembly flush to the rear edge of the desk, to universal adapters or shortened to frames. Only with desks with a width of mm. Visitor s side only possible with angled desks. Mesh covered Assembly with angled desks flush to the rear edge of the desk, in Filo desk systems shortened directly to the frame. Steel and chipboard panels can, however, also be shortened by 193 mm with the Workstation range. Exceptions are formed by combinations with lower desk container, KT sideboard and a table depth of 600 mm. Assembly in conjunction with T-Panel is only possible with a 20 mm gap. Modesty panels Chipboard Steel plate, perforated Mesh covered Nominal dimension: mm Width: mm Height: 350 mm (400 mm from lower edge of the desk) Nominal dimension: mm Width: mm Height: 350 mm (400 mm from lower edge of the desk) Nominal dimension: mm Width: mm Height: 350 mm (400 mm from lower edge of the desk) The actual width of the modesty panel is determined by the nominal dimension, the slab-end finish, and the desktop shape. 2

3 Organisation rail The rail made of aluminium has two grooves which are used to hook in organisation elements. The fronts can be attached to desks in the Workstation and Lift Desk ranges. Thickness 23 mm Profile height 100 mm Assembly with universal adapters behind the desk top, with 2 mm gap or in the table top slot. Load: max. 10 kg Only an organisation rail shortened to match the width of the desk can be selected from a desk width of mm upwards. In this case, assembly is undertaken in the table top slot. Desk railing The rail made of aluminium has one groove on each desk and rear side which is used to hook in organisation elements. Strength 46 mm Profile height 52 mm Assembly with universal adapters behind the top, with 2 mm gap, in table top slot or in the gap between desk tops. Load: max. 20 kg Rail position on the table top is in the centre (table free-standing without any table top slot) or at the back (with block configuration and table top slot). Desk attachment Serves as storage and can be attached to the Workstation. Chipboard 16 mm Assembly with universal adapters behind desk top, with 2 mm gap. Possible for desk width of mm. The desk attachment width is always 30 mm shorter than the width of the desk. Organisation rail Desk railing Desk attachment Nominal dimension: mm Width: Nominal dimension: mm Width: Nominal dimension: mm Length: Depth: 240 mm 3

4 CPU holder Flexible holder for computers below the desk surface by means of an adjustable strap. Assembly external or internal to the desk frame. PC height max. 48 cm. Load: max. 30 kg Printer shelf Printer shelf for Workstation. 13 mm compact shelf Assembly lateral to the desk frame. Load: max. 20 kg Not compatible with: desks with Classic frame, free-form desks on the side of the free-form, desks with top overlap on the overlap side. Screen Lateral screening in two different versions. A rectangular shape which closes flush to the desk edge and a shape running under and in front of the table top for even better screening. With stand feet, can be freely positioned on table top. Additional felt glides are stuck on the stand feet in order to protect the table top. CPU holder Printer shelf Screen Width: 400 mm Depth: 500 mm Width: 800 mm Height: 385 mm (with screen base) Width: 800 mm Height: 535 mm (with screen base) 4

5 Flat screen holder "Wishbone CBS flat screen kit Standard swivel arm with ball joint Cable lead and VESA connection 75 x 75 mm or 100 x 100 mm Assembly with column to table top or with adapter to organisation rail or groove Column Back-to-Back column 1 or 2 screens can be selected in cases of assembly with a column. Mounting is undertaken with a clamp directly to the table top or to a universal adapter. Clamp on table top with a strength of 13 mm, 19 mm or 25 mm. Also inside the flap gap. to universal adapter, behind desk top to universal adapter, in the desktop slot Adapter for organisation rail Adapter for organisation groove If the screens are attached to T-Panel, only 1 flat screen holder per panel side is permitted. If a connection is being made to an organisation groove with a T-Panel Pure (3X) or T-Panel Multi (3P) (top), then a maximum weight of 6 kg and a maximum extension of 500 mm is possible. Not suitable for T-Panel Curve (3S). Flat screen holder Length: 410 mm 5

6 ORGANISATION ELEMENTS Magnetic screen and pin screen Magnetic screen Steel plate Material strength 1 mm (without hook-in lug) is hung into the organisation profile (not organisation rail) Pin board soft fibreboard covered with fabric on steel plate Material thickness 10 mm (without hook-in lug) is hung into the organisation profile (not organisation rail) A minimum panel height of mm is required in order to hook the magnetic screen and pin screen in. Check the configuration of the T-Panels and the hook-in height. Magnetic board The magnetic board is equipped with organisational grooves which allow steel trays to be hooked into it. (plastic trays are not suitable) Steel plate Material thickness 3,5 mm (without hook-in lug) is hung into the organisation profile (not organisation rail) Maximum width for hanging into the organisation groove is 314 mm. A minimum panel height von mm is required in order to hook the magnetic board in. Check the configuration of the T-Panels and the hook-in height. Magnetic screen Pin board Magnetic board Nominal dimension: mm Width: mm Height: 350 mm Nominal dimension: mm Width: mm Height: 350 mm Nominal dimension: 400 mm Width: 390 mm Height: 350 mm 6

7 Storage box Steel plate is hung into the organisation profile or organisation rail A minimum panel height von mm is required in order to hook the storage box in. Check the configuration of the T-Panels and the hook-in height. Binder box Steel plate is hung into the organisation profile (not organisation rail) A minimum panel height of 1.135mm is required in order to hook the binder box in. Check the configuration of the T-Panels and the hook-in height. Drawers The drawers are available in three versions. All three are made of steel plate and are hooked into the organisation profile or organisation rail. A minimum panel height of 1.135mm is required in order to hook the drawers in. Check the configuration of the T-Panels and the hook-in height. closed open open, short Storage box Binder box Width: 314 mm Height: 51 mm Depth: 225 mm Width: 250 mm Height: 220 mm Depth: 294 mm Drawer closed Drawer open Drawer open short Width: 308 mm Height: 43 mm Depth: 215 mm Width: 308 mm Height: 43 mm Depth: 215 mm Width: 308 mm Height: 43 mm Depth: 145 mm 7

8 Compartment Chipboard 19 mm is hung into the organisation profile (not organisation rail) (desk railing excepted) Chipboard 19 mm is hung directly onto T-Panel Pure A minimum panel height of 1.135mm is required in order to hook the ompartment in. Check the configuration of the T-Panels and the hook-in height. Counter top for T-Panel Extend for T-Panel Multi Chipboard 19 mm, compact desk top 13 mm, glass 10 mm Assembly off-centre or centrally to the panel possible for T-Panel Pure Chipboard 19 mm, compact desk top 13 mm Assembly off-centre to the panel The position of the counter top can be freely selected anywhere along the T-Panels. Maximum load: 10 kg. Compartment Nominal dimension: 800 mm, mm Width: 800 mm, mm Height: 163 mm Depth: 248 mm Nominal dimension: 600 mm Width: 600 mm Height: 184 mm Depth: 220 mm Counter top for reception panel for T-Panel Multi for T-Panel Pure Width: mm Depth: 300 mm Width: mm Depth: 240 mm 8

9 Trays and cups Plastic trays Pencil tray Paper tray in A4 landscape format Paper tray in A4 portrait format Aluminium tray Steel tray Steel tray short The metal insert is always included with the larger steel cup. Selection can be made between a metal or a wooden insert with the steel tray. The inclusion of a flower pot is also possible. Stahltassen werden ins Organisationsprofil oder in die Organisationsschiene eingehängt. Konfiguration des T-Panels und Abstand zur Tischplatte prüfen. Steel tray short with metal insert Steel tray short with wooden insert Steel tray short with flower pot Pencil tray Paper tray in A4 landscape format Paper tray in A4 portrait format Width: 380 mm Depth: 150 mm Width: 350 mm Depth: 270 mm Width: 270 mm Depth: 350 mm Aluminium tray Steel tray Steel tray short Width: 330 mm Height: 39 mm Depth: 217 mm Width: 322 mm Depth: 222 mm Height: 127 mm Width: 322 mm Depth: 122 mm Height: 127 mm 9

10 ACCESSORIES INSPIRATIONS INSPIRATIONS Inspiration #01 Desk with T-Panel Pure Extend with organisation profile top, binder box, pin board and magnet board with drawer open short, drawer open, storage box and drawer closed. Inspiration #02 Desk with T-Panel Pure Extend with organisation rail long, steel tray and steel tray short with metal inserts. 10

11 ACCESSORIES INSPIRATIONS INSPIRATIONS Inspiration #03 Desk with T-Panel Pure with pin board and organisation rail long as well as drawer open short. Inspiration #04 Desk with T-Panel Pure Extend with organisation rail short and steel tray short with flower pot as well as partial pin board. 11

12 ACCESSORIES INSPIRATIONS INSPIRATIONS Inspiration #05 Desk with T-Panel Pure with organisation profile top and pin board as well as drawer open. 12

13 ACCESSORIES COLOURS & MATERIALS COLOURS & MATERIALS MELAMINE: Basic colours MELAMINE: Additional basic colours 1 MW white MQ office white MC canvas MP platinum TM clay MT anthracite MA aluminium MS slate MB basalt MELAMINE: Decor colours AR maple 1 EI oak 1 EC oak moreda 1 BH beech light 1 NG walnut grey MELAMINE: Decor, wooden texture 1 CE elm white CO coco texture EA oak aragon MELAMINE: Accent colours 1 TX mustard TH marino blue TS fern greeen 1 not available for compact board! 13

14 ACCESSORIES COLOURS & MATERIALS COLOURS & MATERIALS VENEER: Maple VENEER: Beech VENEER: Oak AK canadian maple BG beech grey EY oak sylt ER oak amaretto EV oak vulcano EG oak grey VENEER: Chestnut KD chestnut natural KP chestnut brown KQ chestnut grey VENEER: Nut VENEER: Bamboo NF american walnut NR walnut siena NB walnut umbra NA waln. anthracite BJ bamboo INN (FABRIC_01) 5W white 5A canvas 5B platinum 5D slate 5T anthracite 5H basalt 4M clay 4E ice blue 4K carmine red 4X mustard 4W green 4B azure blue 14

15 ACCESSORIES COLOURS & MATERIALS COLOURS & MATERIALS NET (NET_02) 6Z black Different fabric collections are available as cover: Urban Plus, Xtreme Plus, Step, Step Melange, Patina, Remix, Europost, Clara, Mainline Flax, Fiord, Divina, Steelcut, Hallingdal, Steelcut Trio, Divina Melange, Divina MD, Greenwich, Greenwich Uni. More information about the specific fabric collections is available at METAL SURFACE POWDER-COATED WI white AL aluminium SZ black ALUMINIUM ANODISED AL aluminium GLASS ST white satined 15