DELIVERING 1ST CLASS SHIP REPAIR/ CONVERSION AND FABRICATION FACILITIES IN THE NORTH EAST OF THE UK

Transcription

1 DELIVERING 1ST CLASS SHIP REPAIR/ CONVERSION AND FABRICATION FACILITIES IN THE NORTH EAST OF THE UK

2 TYNE YARD TEES YARD A&P NORTH EAST OPERATE TWO WORLD CLASS FACILITIES IN HEBBURN ON THE RIVER TYNE, AND MIDDLESBROUGH ON THE RIVER TEES The A&P North East Business is focused on delivering a safe, quality, cost effective and efficient service for all of our customers. The major strength of the business is its personnel; both our workforce and sub-contractors are able to meet our customers demands on a genuine 7 day a week service. The safety culture on site is underpinned by proven procedures, which have enabled the yards to develop a strong safety record. Our two North East England facilities provide our customers with world class ship repair, conversion and fabrication services across the marine and energy sectors. The region is known for its engineering history and therefore we have an excellent subcontractor base to support all multi-discipline project requirements. The Tyne yard boasts the largest commercial dry-dock on the east coast of England supplemented with two deep water berths and a significant modern fabrication facility complete with panel line, rolling, plasma and gas burning machines, all of which is complimented by a highly skilled and flexible workforce. There is extensive storage and load-out capability with fully equipped workshops covering all trades required to carry out projects from ship repair to major, complex ship conversions. Located on one of the busiest rivers in the UK, our 5 acre Tees yard consists of two dry docks and 240m of jetty frontage. With extensive workshop facilities, cranes up to 40 tonnes and a secure tank washing facility the Tees yard is considered a centre of excellence for offshore vessels, dredgers and tankers. Among our customer base we boast a number of Oil Majors and their key contractors as well as the UK Ministry of Defence and some well-known national and worldwide shipping groups. In addition to major marine projects our fabrication facilities lend themselves to building offshore modules, subsea structures, and new ship sections. Both yards have excellent transport links, with International airports within 20km of each yard, major mainline rail connections and ferry services to Europe all within easy reach.

3 TYNE YARD AIR DRAFT Restrictions (above Chart Datum) 76.60m AVERAGE TIDES (ABOVE C.D.) Mean high water springs 5.00m Mean low water springs 0.70m DOCK NO. 1 Length m Breadth at entrance 44.20m Maximum breadth inside 45.72m Blocks: Length 1.37m Width 0.46m Height 1.42m Depth of sill below Chart Datum 5.56m Azimuth Thruster Pit 1.1m(d) x12.4m(w) x 11.4m(l) FPSO Turret Pit 2.8m(d) x16.8m(dia) CRANES See map Load Cap (tons) Max Outreach A m C m D m E m F m H m DOCK NO. 7 Length m Breadth at entrance 20.12m Mimimum breadth inside 20.12m Blocks: Length 1.35m Width 0.40m Height 1.35m Depth of sill below Chart Datum 2.10m QUAYS Depth Length West Quay 7.50m m Bede Quay 9.00m m WORKSHOP AREAS Steel 21,179m 2 Engineering workshop 1,203m 2 Pipework 1,530m 2

4 Thank you for your interest in A&P. The Tees yard is focused on delivering a safe, cost effective and efficient service for all of our customers. TEES YARD We have the management experience, facilities and sub-contract infrastructure to enable us to perform a wide variety of ship repair projects from emergency docking through to conversion works. The yard s major strength is its personnel, both our workforce and sub-contractors are able to meet our customers demands on a genuine 7 day a week service. chris McManuS A&P Group Managing Director Tees The safety culture on site is underpinned by well proven procedures, which have enabled the yard to develop a good safety record. Please feel free to call us at any time to discuss your requirements AIR air DRAFT draft CRANES cranes No restrictions No. No. (see (see map) map) AVERAGE average TIDES TidES (ABOVE (above C.D.) c.d.) Mean high water springs Mean low water springs 5.50m 0.90m DOCK dock NO. no. 5 Length Breadth at entrance Minimum Maximum breadth breadth inside inside Blocks: Length Width Height Depth of sill below Chart Datum Load Load Cap Cap (tons) (tons) m 22.20m 23.40m 1.63m 0.46m 1.37m 1.37m DOCK dock NO. no. 6 Length m Breadth at entrance 17.30m Minimum breadth inside 18.60m Maximum breadth inside Blocks: Length 1.63m Width 0.46m Height 1.37m Depth of sill below Chart Datum 0.37m Azimuth Thruster Pit 3.0m(d) x 8.4m(w) x 5.9m(l) QUAYS QuayS Quay space Depth 8.00m Length m m WORKSHOPS workshops Fabrication workshop workshop Fabrication Engineering workshop workshop Engineering Plumbers workshop workshop Plumbers Electrical workshop Electrical workshop Customer storage storage Customer a&p group LiMiTEd TeesporT CommerCe park DoCksiDe rd, middlesbrough Ts6 6uZ T: +44 (0) F: +44 (0) m2 1375m2 495m2 434m2 chris McManuS Managing director TEES ian douglas commercial director TEES e: Chris.mCmanus@ap-group.Co.uk m: +44 (0) e: ian.douglas@ap-group.co.uk m: +44 (0) Max Outreach Outreach Max 50.00m 25.00m 45.00m 27.00m 27.00m 27.00m 20.00m 20.00m m

5 AFLOAT SERVICES A&P NORTH EAST IS SITUATED AT TWO STRATEGIC SITES ON TYNESIDE AND TEESSIDE IN THE NORTH EAST OF ENGLAND Our Afloat team offer a 24/7 repair service to agents, ship managers and owners alike. We have the management experience, facilities and sub-contractor infrastructure to enable us to get the right engineers to your vessel wherever that may be. We provide experienced, marine engineers, lifting specialists, mechanical fitters, welders, electricians and any other skilled tradesmen within hours of your call. Engineers will come to meet your vessel or you may prefer to visit one of our facilities on the Tyne or the Tees. Either way, we aim to provide a speedy and professional service to the high standard associated with A&P. Typical type of work undertaken; Steel modifications / repair Mechanical repairs / servicing Electrical repair / support Pipe work installation / repair Mobilisation / demobilisation AC & refrigeration systems etc Along with our ability to come to your location, we also are able to provide riding squads should you require work be completed on the move. In addition we operate two world class facilities in North East England. Our facilities in Teesside are located adjacent to one of the busiest ports in Europe on the River Tees. The facility consists of 240m of jetty frontage and a gas tanker berth, 2 dry docks, fabrication, fitting and pipe production with the capacity to accommodate the most demanding vesselrelated works. On the river Tyne we boast two deep water berths, including the recently built West Quay 100m in length with a load bearing capacity of 10t per square metre - the largest commercial dry-dock on the east coast of England, and a significant modern fabrication facility complete with panel line, rolling, plasma and gas burning machines, which are complemented by a highly skilled and flexible workforce. There is extensive storage and load-out capability at both sites, with fully equipped workshops covering all trades required to carry out projects from relatively simple ship repair to major complex ship conversions.

6 FABRICATION A&P OFFER LARGE SCALE FABRICATION FACILITIES IN THE UK We strive to deliver an on schedule quality product at commercially attractive rates. Building up a strong client base we feel that our engineering integrity is never compromised to ensure repetitively good results are achieved. Our experienced project management teams and highly-skilled, motivated, uniquely experienced workforce coupled with our large scale fabrication facilities allow A&P to be ready to service the productive market. We also offer in-house lofting, NC and PCN qualified personnel for MPI, with access to external UT and radiography when required. Additionally A&P retains in-house capability with state-of-the-art 3D laser mapping systems, EDM and conventional optical alignment equipment for dimensional control and survey activities. Types of fabrication regularly undertaken: Subsea and Floating Structures Carousels Spools Reels Foundations/Jackets Ploughs / Trenchers A-Frames Substations Topside Modules Welding Capability (processes) Mig conventional & Cynergic up to 500 amps at 95% Duty Cycle Tig AC / DC water Cooled up to 350 Amps at 95% Duty Cycle Submerged Arc Capability MMA Flux Cored Gas assisted wire capability Boom Welding Semi-Automatic / Fillet Welding (Weldycar) Materials (Typical) Low to Medium Carbon Steels Stainless Steels Including both 22 & 25 CR Super Duplex Aliminium & its Alloys Copper Based Alloys (Brasses & Bronzes) In house ability to Design, Carry out & Qualify WPQR,s to the following Internationally recognised Standards AWS D1.1 Asme IX BS EN 287 BS EN 15614

7 BALLAST WATER TREATMENT THE LARGEST FACILITIES AROUND THE UK OFFERING THE ONE STOP SHOP FOR BALLAST WATER TREATMENT INSTALLATIONS: Full turn-key operation Advise on suitable System for your requirements Onboard survey Detailed Design Project scoping Pre-fabrication to minimise installation time DOCK SIZES & WHARF SPACE TYNE FALMOUTH TEES Dock 1: 259m x 44m Dock 2: 252.8m x 39.6m Dock 5: 175.3m x 22.2m Dock 7: 151m x 20m Dock 3: 220.9m x 26.8m Dock 6: 120m x 17.3m Load-out Quay: 4800m 10T/m 2 Dock 4: 172.5m x 26.2m Wharf Space: 510m Wharf Space 700m Wharf Space 250m CONTACT NO. CONTACT NO. CONTACT NO. +44 (0) (0) (0) Installation Alongside or drydock with full shipyard facilities 3D Laser Imaging A&P have approached numerous system suppliers and have obtained valuable insight to many systems with regards to suitability for clients. A&P are now in a position to offer this expertise to ship owners with a full turnkey project from inception to commissioning. With a full supplier data base we can advise on which type of system either Filtration/UV or Filtration/Electro-chlorination would best suit your vessel depending type, size and route, carry out detailed on board survey with our design house and produce full detailed drawings for class approval. Once complete we will select one of our shipyard facilities in Falmouth, Tyneside or Teeside, plan and prepare any pre-arrival fabrication requirements pipe work, foundation plinths or bulkhead penetration plates ready for the vessels arrival. We can then Install the system with dedicated work force and project management who will liaise with the owners representative/superintendent in all aspects of work. We can also arrange commissioning engineers and ship board training.

8 At A&P we strive to provide our clients with the highest possible levels of service with a focus on Safety, Quality and the Environment. CHRIS McMANUS A&P Group Managing Director North East The North East is an area known for its deep industrial heritage which means that our two locations in the region on the rivers Tyne and Tees are able to draw on a fantastically skilled resource pool, enabling us to deliver to the exacting standards our clients rightly demand. We are proud of our facilities, our people and the projects they deliver. CHRIS MCMANUS MANAGING DIRECTOR - NORTH EAST chris.mcmanus@ap-group.co.uk DD: +44(0) DARREN BROWN PRODUCTION DIRECTOR - NORTH EAST darren.brown@ap-group.co.uk DD: +44(0) DAVID CLEWS GENERAL MANAGER - TYNE david.clews@ap-group.co.uk DD: +44(0) IAN DOUGLAS GENERAL MANAGER - MIDDLESBROUGH ian.douglas@ap-group.co.uk DD: +44(0) A&P NORTH EAST - TYNE WAGONWAY ROAD, HEBBURN TYNE & WEAR NE31 1SP T: +44 (0) F: +44 (0) A&P NORTH EAST - TEES TEESPORT COMMERCE PARK DOCKSIDE RD, MIDDLESBROUGH TS6 6UZ T: +44 (0) F: +44 (0) FOR UP TO DATE CONTACTS PLEASE VISIT -