Axess Trading Pty Ltd

Transcription

1 EGS26 DESCRIPTION Stainless Steel Shower Grabrail for general use. Manufactured to comply with AS SPECIFICATION Material Tube Diameter Wall Thickness Finish Moun ng Stainless Steel 304 grade 32mm 1.2mm Sa n Stainless Stainless Steel 76mmØ concealed ange Mul ple xing holes FINISHES Sa n nish FASTENERS (supplied with each grabrail) Stainless Steel 304 Grade #10 X 50mm Pan Head Philips Drive Screws RECOMMENDATIONS Use with EGHR.SH Sliding Shower Bracket, and Hand Shower Set. Use with EGHR.SD Sliding Soap Basket Designed for the safety, security and convenience of those with a physical disability. Easy to install on most building surfaces. STANDARD GRABRAIL BEND WITH TIG WELDED FIXING Ø32mm 55mm R48mm 1.2mm Wall Thickness 14,3 24,8 28,6 Fully Tig Welded Ø76 5 Holes x Ø6.5

2 EGS26 PRODUCTS AVAILABLE Code Descrip on A B EGS26.10SC As Shown - Le hand 1025mm 175mm AS Accessible* EGS26.11SC Opposite Hand 175mm 1025mm AS Accessible* 1100 B A 1200 INSTALLATION INSTRUCTIONS Recommended Installa on Height To comply with Australian Standards AS , horizontal grabrails must be fastened a distance of mm from the oor (Measured to the top of the rail). Careful planning is required to prepare the wall structures or to inves gate the soundness of any exis ng substrates, followed by selec ng the most suitable xings for the condi ons. The fastenings should be able to withstand a force of 1100N at any point from any direc on. It is recommended that suitably quali ed persons, carry out installa on and reference to Australian Standard requirements should be made to ensure the installa on complies with all requirements. WARRANTY Axess Trading Products as described in the heading, are guaranteed to be free from defec ve materials and workmanship for a period of 12 months from the date of purchase, subject to the product being used for the purpose for which it was designed. Under this warranty, products returned to Axess Trading will be repaired or replaced at no extra charge to the purchaser. Please contact us for our complete warranty cer cate.

3 EGS26 - Connecta Rail Option DESCRIPTION Stainless Steel Shower Grabrail for general use. Manufactured to comply with AS SPECIFICATION Two Parts Material Tube Diameter Wall Thickness Finish Moun ng Horizontal Straight rail EGS10 Ver cal Connecta Rail Stainless Steel 304 grade 32mm 1.2mm Sa n Stainless Stainless Steel 76mmØ concealed ange Mul ple xing holes FINISHES Sa n nish FASTENERS (supplied with each grabrail) Stainless Steel 304 Grade #10 X 50mm Pan Head Philips Drive Screws RECOMMENDATIONS Use with EGHR.SH Sliding Shower Bracket, and Hand Shower Set. Use with EGHR.SD Sliding Soap Basket Designed for the safety, security and convenience of those with a physical disability. Easy to install on most building surfaces. STANDARD GRABRAIL BEND WITH TIG WELDED FIXING Ø32mm 55mm R48mm 1.2mm Wall Thickness 14,3 24,8 28,6 Fully Tig Welded Ø76 5 Holes x Ø6.5

4 EGS26 - Connecta Rail Option PRODUCTS AVAILABLE Code Descrip on A B EGS26.10SCCR As Shown - Le hand 1025mm 175mm AS Accessible* EGS26.11SCCR Opposite Hand 175mm 1025mm AS Accessible* THE CONNECTA RAIL The connecta rail is designed to reduce the shipping costs for single items. Furthermore the connecta rail enables trades people to handle the product much easier on building sites. The horizontal rail can be installed perfectly without the ver cal part, which can be installed a erwards. The connecta rail can be installed in any posi on on the horizontal rail in considera on to in wall blocking and xing provisions. Back View & Front View 1100mm INSTALLATION INSTRUCTIONS Recommended Installa on Height To comply with Australian Standards AS , horizontal grabrails must be fastened a distance of mm from the oor (Measured to the top of the rail). Careful planning is required to prepare the wall structures or to inves gate the soundness of any exis ng substrates, followed by selec ng the most suitable xings for the condi ons. The fastenings should be able to withstand a force of 1100N at any point from any direc on. It is recommended that suitably quali ed persons, carry out installa on and reference to Australian Standard requirements should be made to ensure the installa on complies with all requirements. WARRANTY Axess Trading Products as described in the heading, are guaranteed to be free from defec ve materials and workmanship for a period of 12 months from the date of purchase, subject to the product being used for the purpose for which it was designed. Under this warranty, products returned to Axess Trading will be repaired or replaced at no extra charge to the purchaser. Please contact us for our complete warranty cer cate.

5 Combined sanitary compartment showing overlap of washbasin, pan and shower circulation space Shower Seat Shower Recess Shower Curtain 2300 min 1500 min Shower Recess Fitout Elevation Shower head support grabrail with portable shower head 1160 min 800 max Top Of Shower Head Support Grabrail min 1100 min 1450 min 110 min 850 min 1900 min 1600 min min 100 max Bottom Of Shower HeadSupport Grabrail Shower head support 50 min 50 min min Top of grabrail Top Of Zone 1100 max Bottom Of Zone 900 min This illustra on serves as a guide only. Please consult the Building Code of Australia (BCA) Wall Outlet With 700± 5 Folding Seat Top Of The Seat