3) Applying 3D Fab Facility Information Modeling (FIM) to 4D Scheduling and ND Project Management

Transcription

1 張陸滿教授 Luh-Maan Chang Professor 學歷 / 美國德州大學奧斯汀校區土木工程學博士 Ph.D., The University of Texas at Austin 專長 / (1) 低於 10 奈米製程之廠房污染控制 (2)450mm (18 吋 ) 晶圓廠廠房設施之關鍵技術 (3) 運用 3D 廠房資訊模擬管控時程 (4D) 及廠房專案管理 (ND) Expertise: 1) Contamination Control for below 10nm Fab 2) Crucial Technologies for 450mm (18 ) Fab 3) Applying 3D Fab Facility Information Modeling (FIM) to 4D Scheduling and ND Project Management Refereed Journal Papers ( ) 1. Chi-Chen Tsai, Ming-Teh Wang, and Luh-Maan Chang (2015). Criticality Index Method Based on Float Allocation. Journal of the Chinese Institute of Engineers (JCIE), Vol. 38, No. 7, pp Wang, Ming-Teh, Fan, Su-Ling, Tsai, Chi-Chen, and Chang, Luh-Maan (2015). A Comparison of Float Ownership Issues for Construction Projects Between Taiwan and China. Journal of Marine Science and Technology, Vol. 23, No.1, pp Chuang, Tzu-Sou and Chang, Luh-Maan (2013). Ultra-pure air (UPA) for AMC Control in Nano-processing Environment. Journal of Chinese Institute of Engineers, Vol. 36, Issue 8, pp Chen, Shih-Ming, Griffis, F.H. (Bud), Chen, Po-Han, and Chang, Luh-Maan (2013). A Framework for an Automated and Integrated Project Scheduling and Management System. Automation in Construction, Vol. 35, pp Lu, Lulu, Chiu, Yijui, Yang, Chiahao, and Chang, Luhmaan (2013). The Dynamic Analysis of the Lattice Crane Truss. Applied Mechanics and Materials, Vol. 419, pp Wu, Yi-Ting, Yu, Yi-Hui, Nguyen, Van-Huy, Lu, Kung-Te, Wu, Jeffrey Chi-Sheng, Chang, Luh-Maan and Kuo, Chi-Wen (2013). Enhanced Xylene Removal Photocatalytic Oxidation Using Fiber-illuminated Honeycomb Reactor at ppb Level. Journal of Hazardous Materials, Vol. 262, pp Wang, Ming-Teh, Chang, Luh-Maan and, Tsai, Chi-Chen (2013). A Primary Study of Legal Issues of Building Information Modelling (BIM). Journal of Architecture, Vol. 84, pp 王明德 張陸滿 蔡奇成 建築資訊模型之法律議題初探, 建築學報 (TSSCI), 第 84 期, 頁,2013 年, 臺北市

2 8. Chuang, Tzu-Sou and Chang, Luh-Maan (2013). To Mitigate Airborne Molecular Contamination Through Ultra-Pure Air System. Journal of Building and Environment, Vol. 59, pp Hou, Pey-Ru, Chang, Luh-Maan and Liao, Ching-Lung (2012). Study on BOT Financial Model-The Case of Taiwan High Speed Rail. Journal of the Chinese Institute of Civil and Hydraulic Engineering, Vol. 24, No. 4, pp 侯佩如 張陸滿 廖慶隆 BOT 財務模式之探討與研究 - 以台灣高速鐵路為例, 中國土木水利工程學刊,24 卷 4 期, 頁,2012 年 10. Chen, P.H., Shen, H.K., Lei, C.Y., and Chang, L.M. (2012). Support-Vector-Machine-Based Method for Automated Steel Bridge Rust Assessment. Automation in Construction, Vol. 23, pp Chen, Shih-Ming, Griffis, F.H. (Bud), Chen, Po-Han, and Chang, Luh-Maan (2012). Simulation and Analytical Techniques for Construction Resource Planning and Scheduling. Automation in Construction, Vol. 21, pp Song, Y.L., Cheng, C.H., Lee, C.F., Chang, L.M., and Chou, Y.F. (2012). Novel Device to Measure Critical Point "Onset" of Capillary Wave and Interpretation of Faraday Instability Wave by Numerical Analysis. Ultrasonics, Vol. 52, pp Song, Y.L., Yu,C., Chuang, F.C.,Tseng, Y.C., Zou, J.Y., Shsu, S.G., Ma, T.G., Wu, T.L. and Chang, L.M. (2012). Analysis 2.5-D Permutation Power Transmission Line to Decrease Electro-Magnetic Influence at High Technology Nano-Fab. Advanced Materials Research, (EI), Vol , pp Chiu, Yi-Jui, Leong, Khai-Shoon, and Chang, Luh-Maan (2012). CPC and SMPS Systems of Monitoring Airborne Nanoparticles-Theory and Experiment. Applied Mechanics and Materials, Vols , pp Song, Y.L., Cheng, C.H., Lee, C.F., Chang, L.M. and Chou, Y.F. (2011). Polycarbonate Nanoparticles Spray Coated on Silicon Substrate Using Micro-electromechanical-Systems-Based High-Frequency Ultrasonic Nozzle. Applied Acoustics, Vol. 72, Issue 12, pp Refereed Conference Papers ( ) 1. Wang, Ming-Teh, Tsai, Chi-Chen, Chang, Luh-Maan, Ngo, Thanh Long, Mai, Van Duc, Sung, Yin-Hsuan. Critical Issues for Implementing DB projects in Taiwan rd International Conference on Civil Engineering, Architecture and Building Materials, and is published in Applied Mechanics and Materials with the title Architecture, Building Materials and Engineering Management, (EI), Vols , pp Kao, C.Y., Yang, K.H, Tang, S.C., and Chang, L.M. Adapting Optional Operation Strategy for the Chiller Plant of Semiconductor Fab. The proceedings of nd International Conference on Mechanical, Periodical of Applied Mechanics and Materials, (EI), Vol. 302, pp Engineering and Materials (ICHEM2013), SanYa, Ching, January 23, Lu, Lulu, Chiu, Yijui, Chang, Luhmaan and Yang, Chiahao. The Static Design and Dynamic Analysis of the Lattice Crane Truss. The proceedings of the 2nd International Conference on Civil Engineering and Urban Planning (CEUP 2012), American Society of Civil Engineers, August , (EI), pp

3 4. Chang, Luh-Maan and Chen, Yu-Tzu. Precast Prestressed Concrete Pavement Construction. Proceedings of the ninth Asia Pacific Transportation Development Conference, The Transportation & Development Institute (T&DI) of the American Society of Civil Engineers and International Chinese Transportation Professionals Association, June 29 July 1, 2012, Chongqing, China, pp Chen, Po-Han, Shen, Heng-Kuang, Chang, Luh-Maan. Automated Rust Defect Assessment Method for Steel Bridge Based on Fourier-Transform and Support-Vector-Machine. Proceedings of the 14th International Conference on Computing in Civil and Building Engineering (ICCBE 2012), June 27-29, 2012, Moscow, Russia, pp (Abstract) and the 349th paper in the CD proceedings. 6. Ting, Hsin-I, Chang, Luh-Maan and Lee, Pin-Chan. Dynamic Multi-Attribute Decision Making Model with Grey Number Evaluations on Safety Management Performance of Subcontractors. Proceedings of the nd International Conference on Construction and Project Management (ICCPM 2011), September 16-18, 2011, Singapore, pp Chang, L.M., Shen, H. K., and Chen, P. H. Automated Rust Defect Recognition Method Based on Color and Texture Feature. Proceedings of the International Conference on Image Processing, Computer Vision, and Pattern Recognition (IPCV'11), July 18-21, 2011, Session 19, Las Vegas, Nevada, USA, pp Chen, P.H., Shen, H.K., Lei, C.Y., and Chang, L.M. (2011). Fourier-Transform-Based Method for Automated Steel Bridge Coating Defect Recognition. Procedia Engineering, Vol. 14, pp Song, Y.L., Cheng, C.H., Lee, C.F., Chang, L.M. and Chou, Y.F. Numerical Analysis and Experimental Results by Silicon-Based MHz Ultrasonic Nozzles to Product of Monodisperse Droplets, Advanced Materials Research, (EI), Vol , September 2011, pp F.C. Chuang, Y.L. Song, C. Yu, T.L. Wu and L.M. Chang. Magneto-resistive Sensor Readout Circuit and Field Canceling System in Next Generation Nano-Fab Asia-Pacific EMC Symposium, Jeju Island, Korea, May 16-19, Other Proceedings Articles ( ) 1. Kuei-Po Chang, Wei-Li Sun and Luh-Mann Chang, Passive Magnetic Shielding System in ELF, The Twenty-Eight KKHTCNN Symposium on Civil Engineering, Bangkok, Thailand, November 16-18, 賴彥程 張陸滿 自動化潔淨室氣流模擬應用於半導體廠房設計之研究, 2015 營建工程與管理學術研討會, 高雄, 臺灣,2015 年 7 月 3 日 Lai, Yen-Chen & Chang, Luh-Maan, To Apply CFD to Airflow Simulation of Cleanroom in Semiconductor Fab Design. The 19th Symposium on Construction Engineering and Management CEM 2015, Kaohsiung, Taiwan, July 3, Yu-Tzu Chen & Luh-Maan Chang, Paving for the future- Precast Prestressed Concrete Pavement ( PPCP ). Proceedings of International Workshop on Civil Engineering and Architecture, IWCEA-2014, Istanbul, Turkey, August 8-9, 2014, pp Po-Han Chen, Meng-Shen Kan and Luh-Maan Chang. Sustainable Design for

4 Hospitals in Taiwan. Proceedings of International Workshop on Civil Engineering and Architecture, IWCEA-2014, Istanbul, Turkey, August 8-9, 2014, pp 陳錦村 張陸滿 陳正興 遠域地震對晶圓廠的影響, 中華民國第十二屆結構工程研討會暨第二屆地震工程研討會, 高雄, 台灣, 論文編號 1103,2014 年 8 月 日 The Impact of Remote Earthquakes on Wafer Fab. The Twelfth National Conference on Structural Engineering, The Second National Conference on Earthquake Engineering, Kaohsiung, Taiwan, August, 2014, No.1103 in Proceedings CD 6. 謝濟安 張陸滿 資源導向排程模擬模型應用於高科技廠房新建工程 以廠房下部結構工程為例 2014 營建工程與管理學術研討會,A3 工程規劃與排程, 國立宜蘭大學,A3-33 -A3-42 頁,2014 年 6 月 26 日 Applying Resource-Based Scheduling Simulation to High-Tech Fab Construction- Substructure Construction Case CEM Workshop, pp. A3-33 -A Chin-Tsun Chen, Luh-Maan Chang and Cheng-Hsing Chen. The Earthquake Impact on Wafer Fab. The Twenty-Sixth KKHTCNN Symposium on Civil Engineering, Singapore, November 18-20, 2013, S-8-3, Proceedings in CD. 8. Wen, Hung-Yung, Chang, Luh-Mann, Yu Chwen and Song, Yu-Lin. Mitigating Electro-Magnetic Influence with C-Type Materials Wrapping on Active Cancelling Coils in Nano-Fab. The Proceedings of 17th Symposium on Construction Engineering and Management, Construction Materials and Quality Control Section, Tam Kang University, Taipei campus, June 28, 2013, D1-3 paper. 9. Chiu, Wen-Ben and Chang, Luh-Mann. Application of Design for Six Sigma Methodology for concurrent Engineering Execution in Construction Projects. The Proceedings of the 2nd International Conference on Engineering and Applied Science (2013 ICEAS), Tokyo, Japan, March 15-17, 2013, pp Wen-Bin Chiu1, and Luh-Maan Chang. Application of Six Sigma Process Improvement Method on Construction Turnkey Projects, International Multi-Conference on Chemical, Ecological and Biological Science (IMCEBS'12), International Scientific Academy of Engineering and Technology, Kuala Lumpur, Malaysia, December 29-30, Chiu, Wen-Ben, and Chang, Luh-Mann. Application of Six Sigma Process Improvement Method on Construction Turnkey Projects. The proceedings of International conference on Civil and Transportation Systems (ICCTS 12), Kuala Lumpur, Malaysia, December 薛春明 張陸滿 我國與英國公共建設評估法之比較 兼論我國蚊子館之成因與對策, 論文摘要集,2012 第 16 屆 CEM 營建工程與管理學術研討會, 朝陽大學, 台中,35 頁,2012 年 7 月 6 日 13. 游伯堅 張陸滿 潔淨室分區施工與綠性平衡法之研究, 論文摘要集,2012 第 16 屆 CEM 營建工程與管理學術研討會, 朝陽大學, 台中,80 頁,2012 年 7 月 6 日 14. 洪振發 張陸滿 陳士明 張淑華 盧韜仁 曾嘉豪 半主動式諧調質量阻尼器之設計研究, 第十九屆振動與噪音工程學會學術研討會, 頁, 2011 年 6 月

5 Invited Presentation ( ) 1. To Apply Nanotechnology to High Tech Facility Engineering( 奈米科技在高科技廠房設施工程的應用 ), Institutional Seminar, Institute of Applied Mechanics, National Taiwan University, Taipei, Taiwan, December 21, Sustainable Manufacturing & CSR of TSMC, SEMICON Japan 2015, Tokyo Big Sight, Tokyo, Japan, December 17, Climate Change Adaptation and Water Resources, Joint International Forum, KSCE 2015 Convention and The 29 ECM of ACECC, GSCO (Gunsan Saemangeum Convention Center), Gunsan, Korea, October 29, How does TSMC Deal With Sustainable Semiconductor Manufacturing in Taiwan?, Sustainable Manufacturing Forum of SEMICON West 2015, Moscone Center, San Francisco, July 14, A World Class Educational Institute( 世界一流的教育學院 ) Organizing Committee for Tzu Chi Sustainable Development Institute ( 慈濟永續發展學院籌備委員會 ), Tzu Chi University, Taipei, June 30, Civil Engineering Role on High Tech Facility( 土木工程在高科技廠房設施之角色 ) Department of Civil & Engineering Management, National Quemoy University, Kinmen, Taiwan, May 22, Crucial Technologies of Taiwan High-Tech Facility( 台灣半導體廠房設施之關鍵技術 ) Department of Construction Management, Chung Hua University, Hsin-Chu, Taiwan, December 12, Introduction of Taiwan High-Tech facility Activities & Expectation to Suppliers SEMICON Japan 2014, Tokyo Big sight, Tokyo, Japan, December 5, Paving for the Future- Precast Prestressed Concrete Pavement (PPCP), International Workshop on Civil Engineering and Architecture, IWCEA-2014, Istanbul-Turkey, August 8, A Multi-period Evaluation Model of Behavior Based Safety, Civil Engineering Conference in Asia Region (CECAR6), Asian Civil Engineering Coordination Council (ACECC), Jakarta, Indonesia, August 21, Sustainable Disaster Mitigation," The 1st Asian Board Meeting: Lessons Learned from the Past Natural Disasters, Japanese Society of Civil Engineers (JSCE) and Asian Civil Engineering Coordination Council (ACECC), Jakarta, Indonesia, August 20, Sustainable Development of Civil Engineering in High-Tech Era, 2013 Sustainable Engineering Prevention of Civil Disaster Conference, I-Shou University, Kaohsiung, Taiwan, May 31, Keynote Speech, Sustainable Development of Civil Engineering in High-Tech Era 高科技時代土木工程之永續發展,2013 工程永續與土木防災研討會, 義守大學, 高雄, 臺灣,2013 年 5 月 31 日 13. The Role of Civil Engineer in Nanotechnology (NT) Era and Its Critical Technologies, Civil Division of Hong Kong Institute of Engineers and ASCE Hong Kong Section, Honk-Kong, China, May 13, Automated Rust Defect Assessment Method for Steel Bridge Based on Fourier-Transform and Support-Vector-Machine, The 14th International Conference on Computing in Civil and Building Engineering (ICCBE 2012), Moscow, Russia, June 28, (co-present with Po-Han Chen) 15. High-Tech Facility Engineering in NT Era, Departmental Seminar, Sonny

6 Astani Department of Civil and Environmental Engineering, University of Southern California, May 8, Taiwan High-Tech and Her Crucial Facility Technologies ( 台灣高科技與廠房設施關鍵技術 ), 5070 Industrial Management Consulting Company ( 五零七零企管顧問公司 ), Taipei, Taiwan, March 21, Looking Back of Taiwan High Speed Rail BOT Project ( 台灣高鐵 BOT 專案之回顧 ), 5070 Industrial Management Consulting Company ( 五零七零企管顧問公司 ), Taipei, Taiwan, December 21, Optimal Permutation of Power Transmission Line at High Technology Nano-Fab to Decrease Electromagnetic Influence, AMTA2011, Denver, Colorado, USA, October 7, Taiwan High-Tech & the Crucial Technologies of Fab-Facility ( 台灣高科技與廠房設施關鍵技術 ), Rotary of Taipei Datong District ( 台北大同扶輪社 ), Taipei, Taiwan, September 23, Sustainable Precast Post-tensioned Concrete Pavement, International Seminar on Approach to Sustainable Futuristic Infrastructure, ICE-India, New Deli, India, September 15, Automated Rust Defect Recognition Method Based on Color and Texture Feature, IPCV2011: The 2011 International Conference on Image Processing, Computer Vision, and Pattern Recognition, Las Vegas, Nevada, USA, July 21, Object-Oriented ND-Project Management ( 物件導向之多維度專案管理 ), Computer-Aided Project Management Forum on Scheduling ( 電腦輔助計畫管理系列論壇 - 進度管理 ), Chinese Institute of Civil and Hydraulic Engineering (CICHE), Taipei, Taiwan, July 4, Green Manufacturing Factory and LEED, 2011 MACE Annual Conference, Ulan Bator, Mongolia, June 17, Taiwan High Speed Rail PPP Project, Graduate Seminar, Department of Construction Management, TsingHua University, Beijing, China, May 12, Civil Engineering in Nano-World ( 奈米世界裡的土木工程 ), Graduate Seminar, Department of Civil Engineering, National Cheng-Kung University, Tainan, Taiwan, April 11, 2011.