-Submittal Transmittal

Transcription

1 Due Date: -Submittal Transmittal Detailed, Grouped by Each Number Alley 111 Apartments Project # Tel: Fax: Skanska USA Building Inc. Date: 1/5/2015 Reference Number: 0435 Transmitted To: Bill Jaillet Transmitted By: Debbie Lim Grund & Company Skanska USA Building Inc N. 97th Seattle, WA Tel: Fax: Yale Ave. N., Suite 400 Seattle, WA Tel: Fax: Qty 1 Submittal Package No Description Due Date Package Action Grund - Interior Paint System Substitution Request Approved as Noted Transmitted For Delivered Via Tracking Number Construction Items Qty Spec Section Sub Sec. Description Notes Remarks Signature Signed Date Prolog Manager Printed on: 1/5/2015 6west Page 1

2 Submittal Transmittal Detailed, Grouped by Each Number Alley 111 Apartments Project # Tel: Fax: Skanska USA Building Inc. Date: 12/5/2014 Reference Number: 0419 Transmitted To: Kevin Reed Transmitted By: Debbie Lim GGLO Skanska USA Building Inc First Avenue Suite 301 Seattle, WA Tel: (206) Yale Ave. N., Suite 400 Seattle, WA Tel: Fax: Qty 1 Submittal Package No Description Due Date Package Action Grund - Interior Paint System Substitution Requests 12/19/2014 Transmitted For Delivered Via Tracking Number Approval Items Qty Description Notes Item Action Cc: Company Name Contact Name Copies Notes Remarks Signature Signed Date Prolog Manager Printed on: 12/5/2014 6west Page 1

3

4 As of 06/17/2014, Complies with: OTC Yes LEED 09 CI Yes SCAQMD Yes LEED 09 NC Yes CARB Yes LEED 09 CS Yes CARB SCM 2007 Yes LEED 09 H & S Yes MPI Yes NGBS Yes CHARACTERISTICS GREENGUARD PRODUCT CERTIFIED FOR LOW CHEMICAL EMISSIONS UL.COM/GG UL 2818 GOLD SPECIFICATIONS PROMAR 200 Zero VOC Interior Eg-Shel B Series SURFACE PREPARATION ProMar 200 Zero VOC Interior Eg -Shel is a durable, professional quality, interior vinyl acrylic finish for use on walls, ceilings, and trim of primed plaster, wallboard, wood, masonry, and primed metal. Color: Most colors To optimize hide and color development, always use the recommended P-Shade primer Coverage: sq 4 mils wet; 1.7 mils dry Drying 77 F, 50% RH: Touch: 1 hour Recoat: 4 hours Drying and recoat times are temperature, humidity, and film thickness dependent Finish: Flash Point: N/A Tinting with CCE only: Base oz/gal Strength High Ref White % Extra White % Deep Base % Ultradeep % Real Red % Bright Yellow % Dover White do not tint Vehicle Type: Vinyl Acrylic Extra White B20W02651 VOC (less exempt solvents): <50 g/l; 0.42 lb/gal As per 40 CFR and SOR/ , s.12 Volume Solids: 42 ± 2% Weight Solids: 55 ± 2% Weight per Gallon: 10.8 lb WVP Perms (US) 8.5 grains/(hr ft 2 in Hg) Block 1 ct. PrepRite Block Filler* Drywall 1 ct. ProMar 200 Zero VOC Interior Primer Masonry 1 ct. Loxon Concrete & Masonry Primer* Plaster 1 ct. Premium Wall & Wood Primer* Wood 1 ct. Premium Wall & Wood Primer* * These primers contain relatively low amounts of VOCs, but could result in minor, noticeable odors. Other primers may be appropriate. When repainting involves a drastic color change, a coat of primer will improve the hiding performance of the topcoat color. WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at LEAD (in US) or contact your local health authority. Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Drywall Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust. Masonry, Concrete, Cement, Block All new surfaces must be cured according to the supplier s recommendations usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer. Anti-microbial This product contains agents which inhibit the growth of microbes on the surface of this paint film. 6/ continued on back

5 SURFACE PREPARATION APPLICATION CAUTIONS PROMAR 200 Zero VOC Interior Eg-Shel B Series Plaster Bare plaster must be cured and hard. Textured, soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry. Wood Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth. Mildew Remove before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with water and allow the surface to dry before painting. Wear protective eyewear, waterproof gloves, and protective clothing. Quickly wash off any of the mixture that comes in contact with your skin. Do not add detergents or ammonia to the bleach/water solution. Apply at temperatures above 50 F. No reduction needed. Brush Use a nylon/polyester brush. Roller Use a 3/8" - 3/4" nap synthetic cover. Spray Airless Pressure psi Tip "-.021" CLEANUP INFORMATION Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with mineral spirits to prevent rusting of the equipment. Follow manufacturer s safety recommendations when using mineral spirits. For interior use only Protect from freezing. Non-photochemically reactive. LABEL CAUTIONS Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. HOTW 06/17/2014 B20W Caulking Gaps between walls, ceilings, crown moldings, and other interior trim can be filled with the appropriate caulk after priming the surface. The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication. Consult your Sherwin-Williams representative to obtain the most recent Product Data Sheet.

6 As of 05/14/2014, Complies with: OTC Yes LEED 09 CI Yes SCAQMD Yes LEED 09 NC Yes CARB Yes LEED 09 CS Yes CARB SCM 2007 Yes LEED H & S Yes MPI Yes NGBS Yes CHARACTERISTICS GREENGUARD PRODUCT CERTIFIED FOR LOW CHEMICAL EMISSIONS UL.COM/GG UL 2818 GOLD SPECIFICATIONS A HARMONY Interior Acrylic Eg-Shel B Series SURFACE PREPARATION Formaldehyde Reducing Technology helps improve indoor air quality by reducing VOCs from possible sources like insulation, carpet, cabinets and fabrics.* Odor Eliminating Technology helps reduce common indoor odors so rooms stay fresher, longer.* Anti-microbial agents inhibit the growth of mold and mildew on the paint surface and inhibit the growth of bacterial odors. Zero VOC formula tinted with ColorCast Ecotoner Colorants that do not add VOCs when tinted. Great hide and a durable finish that withstands frequent washings. Harmony s Formaldehyde Reducing Technology has been tested by a third-party laboratory. Color: Most Colors To optimize hide and color development, always use the recommended P-Shade primer Coverage: sq 4 mils wet; 1.7 mils dry Drying 77 F, 50% RH: Touch: 1 hour Recoat: 4 hours Drying and recoat times are temperature, humidity, and film thickness dependent Flash Point: N/A Finish: Tinting with CCE only: Base oz/gal Strength Extra White % Deep Base % Vehicle Type: 100% Acrylic Extra White B09W01051 VOC (less exempt solvents): <50 g/l; 0.42 lb/gal As per 40 CFR and SOR/ , s.12 Volume Solids: 42 ± 2% Weight Solids: 55 ± 2% Weight per Gallon: 10.8 lb Block 1 ct. Loxon Block Surfacer* 2 cts. Harmony Interior Drywall 1 ct. Harmony Interior Primer 2 cts. Harmony Interior Masonry 1 ct. Loxon Concrete & Masonry Primer/Sealer* or Harmony Interior Primer 2 cts. Harmony Interior Plaster 1 ct. Premium Wall & Wood Primer* or Harmony Interior Primer 2 cts. Harmony Interior Wood, Composition Board 1 ct. Premium Wall & Wood Primer* or Harmony Interior Primer 2 cts. Harmony Interior * These primers contain relatively low amounts of VOCs, but could result in minor, noticeable odors. Other primers may be appropriate. When repainting involves a drastic color change, a coat of primer will improve the hiding performance of the topcoat color. WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at LEAD (in US) or contact your local health authority. Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Drywall Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust. Masonry, Concrete, Cement, Block All new surfaces must be cured according to the supplier s recommendations usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer/Sealer. *The length of time Harmony actively reduces odors and formaldehyde depends on the concentration, the frequency of exposure and the amount of painted surface area. 5/ continued on back

7 101.76A HARMONY Interior Acrylic Eg-Shel B Series SURFACE PREPARATION APPLICATION CAUTIONS Plaster Bare plaster must be cured and hard. Textured, soft, porous, or powdery plaster should be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry. Wood Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth. Mildew Remove before painting by washing with a solution of 1 part liquid bleach and 3 parts water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with water and allow the surface to dry before painting. Wear protective eyewear, waterproof gloves, and protective clothing. Quickly wash off any of the mixture that comes in contact with your skin. Do not add detergents or ammonia to the bleach/water solution. Caulking Gaps between walls, ceilings, crown moldings, and other interior trim can be filled with the appropriate caulk after priming the surface. Apply at temperatures above 50 F. No reduction necessary. Brush - Use a nylon/polyester brush. Roller - Use a 3/8" - 3/4" nap polyester or Soft Woven cover Spray Airless Pressure psi Tip "-.021" CLEANUP INFORMATION Clean spills, spatters, hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with mineral spirits to prevent rusting of the equipment. Follow manufacturer s safety recommendations when using mineral spirits. For interior use only. Protect from freezing. Non-photochemically reactive. LABEL CAUTIONS Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. HOTW 05/14/2014 B09W The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication. Consult your Sherwin-Williams representative to obtain the most recent Product Data Sheet.

8 The Sherwin-Williams Company 1436 Leary Way Seattle, Washington Office: (206) / Fax: (206) / Cell: (206) October 20, 2014 Grund & Company 1115 N. 97 th Street Seattle, WA Reference: PM200 0 VOC VS Harmony Dear Bill, I have attached data pages for both the PM200 O VOC Eg-Shell and the Harmony Eg- Shell products. Both products meet Green Guard standards with the Gold rating. Both products have same VOC s, same coverage s, same volume solids, same dry times and both have anti-microbial properties. I have listed the main differences between the both below. Harmony PM VOC 100% Acrylic Vinyl Acrylic Formaldehyde Reducing Technology n/a VOC/Odor Reducing Technology n/a Two Bases (Extra White/Deep) High Reflective, Extra White, Deep,Ultradeep,Real Red and Bright yellow. I feel based on this information these two products are very similar. Depending on the owners request I feel confident that both products will meet his requirements and expectations. The quality of the finish will be the same on the PM 200 as it would if you used Harmony you will not see a difference, depending of course on application. I do want to mention that because of the number of bases, the vinyl acrylic make up and my experience in the field, majority of my paint contractors prefer the PM product over the Harmony. Reason for this is ease of application, touch up quality and wide number of bases, allowing same product to be used throughout the entire project. Please feel free to call me with any questions. Jake Marple Sherwin Williams Paint Company

9 From: Sent: To: Subject: Bill Jaillet Tuesday, December 02, 20142:322 PM Lim, Debbie RE: Paint Products The cost savings is $ 17, Bill Jaillet Project Manager Grund & Company Direct Cell From: Lim, Debbie [mailto:debbie.lim@skanska.com] Sent: Monday, December 01, :13 PM To: Bill Jaillet Subject: FW: Paint Products Credit for using ProMar rather than Harmony? From: Germain, Stewart Sent: Friday, November 21, :34 PM To: Kevin Reed; Lim, Debbie; Jessiee Templeton Subject: Re: Paint Products Show me the money!! ;) Stewart Germain Skanska CDUS From: Kevin Reed <kreed@gglo.com> Date: Friday, November 21, 2014 at 3:27 PM To: "Lim, Debbie" <debbie.lim@skanska.com>, Jessie Templeton <jtempleton@gglo.com> Cc: Stewart Germain <Stewart.Germ main@skanska.com> Subject: RE: Paint Products Debbie, I ve asked for Medgar s opinion on the primer.