Composite Technologies from Cobham Antenna Systems
|
|
- Ronald Douglas
- 5 years ago
- Views:
Transcription
1 Composite Technologies from Cobham Antenna Systems Maintaining precision in the most demanding applications The most important thing we build is trust ON LAND AT SEA IN THE AIR COB_M09_Composite_Technologies_V2.indd 1 05/11/ :39
2 A Wealth of Experience Cobham Antenna Systems technical leadership in the use of advanced composites and its unequalled track record in innovative design solutions have made Cobham one of the foremost designers and manufacturers of specialist composite components and structures in Europe. Cobham delivers a complete design to installation solution for advanced composite structures for airborne, naval and land based platforms. As part of Cobham, Cobham Antenna Systems has the financial and management backing of one of the largest Aerospace and Defence organisations in the UK. This supports continual product and service development, the cornerstone of the company s enviable reputation for excellence and reliability essential assets in such demanding industries. Radomes and structures are manufactured to the most exacting tolerances to meet diverse requirements such as aerodynamic loads, birdstrike, hail, green seas, low Radar Cross Section (RCS), installed radar / antenna performance through to ballistic performance. Cover picture of Type 45 Destroyer BAE Systems COB_M09_Composite_Technologies_V2.indd 2 05/11/ :39
3 A full size model of a helicopter fuselage and belly radome / antenna are assessed for interference caused by the airframe, other antennas and FLIR pod. All measurements are made in the near field and the data converted to the far field by Fast Fourier transformations. Test results are used to verify predictions made by in-house electromagnetic modelling software (FORAM). This 6m near field range is one of six ranges at Composite Technologies. 1 COB_M09_Composite_Technologies_V2.indd 1 05/11/ :39
4 Design Excellence Composite Technologies has a wealth of experience with anisotropic materials, their benefits as well as limitations. This, coupled with a large, validated, materials database enables the company to propose efficient costeffective solutions to design requirements. Creating structures that work reliably in the most demanding environments requires a holistic approach to design, manufacture and test. At Composite Technologies innovative design and specialist RF and composite expertise, combine to provide customers with structures that perform at all levels. This performance is underpinned with the very latest test facilities. Mechanical Design Composite Technologies has wide experience in all aspects of mechanical design and a deep understanding of non-metallics. This enables the company to analyse every aspect of a customer s requirements to ensure development of the most efficient and costeffective solutions. The company s experience in mechanical design covers static and dynamic structural aspects and Computational Fluid Dynamics (CFD). Furthermore, its vast knowledge of reinforcing fibres and specialist matrices, including thermoplastics, means that the materials properties are tailored for optimum product performance. RF Design Radomes operating from VHF to microwave frequencies are designed with in-house developed software using ray-tracing, physical optics, and method-of-moments solution techniques. This software is able to predict radome / antenna performance parameters such as main beam transmission loss, boresight error, sidelobe degredation, radome-induced flash lobes and depolarisation. The company also has considerable experience of Low Observable (LO) structures and Frequency Selective Surfaces (FSS) which incorporate periodic arrays of conductive elements. These achieve transmission properties that are frequency-dependent, and thus allow the radome / antenna to have a lower out-of-band radar cross section. RCS predictions can then be correlated to actual measurements using the company s inhouse test range. Sampson Type 45 Destroyer Radar Array The multi-functional radar array for the new Type 45 Destroyer is the main sensor for the Principal Anti-Air Missile System (PAAMS), requiring extremely high precision in its construction. Composite Technologies construct the array utilising ultra-high modulus carbon fibre to achieve the accuracy and stiffness requirements necessary for operation in the most extreme conditions. Picture BAE Systems 2 COB_M09_Composite_Technologies_V2.indd 2 05/11/ :39
5 TORNADO IDS RADOME TEST Tornado IDS radome undergoing evaluation on a far field test site. 3 COB_M09_Composite_Technologies_V2.indd 3 05/11/ :39
6 Manufacturing Precision 1 PRE-PREG LAY-UP IN THE CLEANROOM Precision lamination of components in a controlled environment. 2 AUTOCLAVE PROCESSING For optimum consolidation and minimal voidage, autoclave processing is vital. A suite of autoclaves give enormous capability and capacity. The company is based on two sites that provide over of 135,000 square feet (12,500 sq.m) of purpose-built manufacturing space. The latest CAD systems enable the company to optimise received data to create cutter paths for five axis machining centres that are crucial in the manufacturing process. Whatever the manufacturing quantities, the precise tolerances demanded by the aerospace and defence markets are most stringently controlled. Rigorous quality assurance procedures cover all manufacturing processes including hand lamination, pre-preg / autoclave, Resin Transfer Moulding (RTM), compression moulding, integration of metallic coatings through to final assembly backed up by proven abilities in repair and support. Product integrity and consistency is of paramount importance from small components to large, complex structures, the company is focused on fast, cost-effective, and above all, precise production Resin Transfer Moulding The properties of a radome need to meet the conflicting requirements of high impact strength, good temperature performance and excellent dimensional stability with low dielectric loss properties. Eurofighter Typhoon nose radome quartz pre-form being laid up on male RTM tool. 4 COB_M09_Composite_Technologies_V2.indd 4 05/11/ :39
7 3 FIVE AXIS NC MACHINING Five Axis NC machining is undertaken on a wide range of composite and metallic components. 4 ROBOTISED PAINTING Accurate, repeatable application of a wide range of paints and surface coatings is ensured by the use of robotic paint facilities. 4 5 COB_M09_Composite_Technologies_V2.indd 5 05/11/ :39
8 Quality Assurance Cobham Antenna Systems is continually reviewing and improving the performance of its products and services and reinforcing its rigorous quality assurance programme backed up by frequent external and internal audits. Composite Technologies is accredited to BS / EN / ISO 9000 (2000), AS9100, AC7118 Nadcap and EASA Part 21 and Part 145. The company uses pre-production test facilities for assessments of new designs, and imposes strict compliance checks on every finished product. An extensive range of test equipment includes facilities for three-axis co-ordinate measuring and ultrasonic NDE. The company has numerous customer-specific approvals. Laboratory Support Materials Database and Testing The laboratory facilities provide mechanical data under a broad range of environmental conditions. Typical testing standards include British Standards, MIL-STD s and ASTM. Evaluation of materials performance under other environmental conditions such as rain erosion, UV and chemical contamination is also conducted. Over 40 years experience in the design of RF windows has yielded an extensive database of the specialised polymer and reinforcement materials required for low loss dielectrics. Three Axis Measuring As well as meticulously measuring prototypes or finished products, this facility can be used to generate CAD models of components to verify compliance with the original dimensions. In addition components that lack either full definition or have incomplete drawings data can be measured and a solid model created. Non-destructive Evaluation (NDE) The company utilises a variety of NDE methods ranging from handheld ultrasonic A-scan to fully automated C- scan detection techniques. 6 COB_M09_Composite_Technologies_V2.indd 6 05/11/ :39
9 IPD CORRECTION Insertion Phase Difference (IPD) correction equipment is used to bring the electrical thickness of the Eurofighter Typhoon radome up to its optimum value by selectively spraying the inside of the radome with a corrective coating. Phase changes through discrete patches of the radome wall are measured and stored automatically using computer controlled positioning and data acquisition systems. Resin is then sprayed internally on to the electrically thin areas to bring phase differences to within 0.5 degree of the required value. 7 COB_M09_Composite_Technologies_V2.indd 7 05/11/ :39
10 Advanced Products with Proven Performance Eurofighter Typhoon Radomes Composite Technologies manufactures the complete suite of radomes for Eurofighter Typhoon including: Nose Radome, MAW, DASS Suite, Fin Tip, Strakes and CRPA. EH101 Belly Radome This AEW radome measuring over 3.2m in diameter was manufactured by Composite Technologies to a particularly demanding specification for both structural and RF parameters. Bombardier Dash 8 Auxiliary Fuel Tank Autoclave-cured honeycomb sandwich construction was employed to minimise mass for this lightweight and modular solution to increase fuel capacity and extend the range of Bombardier Dash 8 surveillance aircraft in Australia. High Tension CFRP High tension carbon fibre over-wrapped permanent magnet rotor for use in a kinetic energy recovery system (KERS) for a supercar, this composite overwrap is capable of withstanding the high inertial forces and temperatures in excess of 200 C 8 COB_M09_Composite_Technologies_V2.indd 8 05/11/ :39
11 AW159 Future Lynx Composite Technologies is responsible for the design and manufacture of the Tailplane End Plate for the Future Lynx, this structure also encompasses embedded antennas. Precision Reflectors The company has a long history in the design and manufacture of single piece and segmented reflectors with tolerances down to 0.04mm RMS. Man-portable tactical seven segment communications reflector with exceptionally low mass. Filament Winding Highly accurate repeatable filament wound structures are manufactured using glass, aramid and carbon reinforcements with a wide variety of matrices. SATCOM Reflectors 5.4m nine segmented SATCOM reflector and sub-reflector with 0.5mm RMS surface accuracy. 9 COB_M09_Composite_Technologies_V2.indd 9 05/11/ :39
12 Ultimate performance structures Cobham Antenna Systems will be at the forefront of tomorrow s innovations, partnering with imaginative system designers to shape the future. On land Picture BAE Systems At sea In the air For further information please contact: Cobham Antenna Systems Composite Technologies Gelders Hall Road Shepshed Leicestershire, LE12 9NH England Tel: +44 (0) Fax: +44 (0) Cobham Antenna Systems Composite Technologies Horizon Technology Park Six Hills Way, Stevenage Hertfordshire, SG1 2DH England Tel: +44 (0) Fax: +44 (0) CompositeTechnologies.Sales@cobham.com V Designed and produced in England by Generator (Creative Energy) Ltd Telephone: +44 (0) info@generator.uk.com Whilst every effort is made to ensure the accuracy of the information contained in this brochure, no responsibility can be accepted for any errors or omissions. All photography is copyright and is used with thanks to the respective owners. This paper contains 50% recycled fibres and is bleached in a totally chlorine free process. The virgin fibre content of this paper is elemental chlorine free and comes from managed forests. COB_M09_Composite_Technologies_V2.indd 10 05/11/ :40
Composite Technologies from Cobham Antenna Systems
Composite Technologies from Cobham Antenna Systems Maintaining precision in the most demanding applications The most important thing we build is trust ON LAND AT SEA IN THE AIR A Wealth of Experience A
More informationExel Tubes and Hollow Profiles. Your benefits
Exel Tubes and Hollow Profiles Exel is with over 40 years experience the world leader in the production of composite Pull-Wound Tubes and Hollow profiles. These products consist of various reinforcement
More informationPrecision with vision
Precision with vision 2 PRECISION WITH VISION For more than six decades the Barden name has been synonymous with quality, precision and excellence. From its outset the company has specialised in the manufacture
More informationHexMC USER GUIDE. March 2014 Publication No. HTI 303. Hexcel Registered Trademark Hexcel Corporation
HexMC User Guide HexMC USER GUIDE March 2014 Publication No. HTI 303 Hexcel Registered Trademark Hexcel Corporation 2 Contents Introduction...4 Material Description...4 Benefits of HexMC...5 Physical Properties...5
More informationTHE SHAPE OF THINGS TO COME
THE SHAPE OF THINGS TO COME Warden Plastics Established since 1957, Warden has always been at the forefront of plastic injectionmoulding and extrusion, serving a diverse range of industries. Warden s initial
More informationOEM-CERTIFIED AEROSTRUCTURES SOLUTIONS
OEM-CERTIFIED AEROSTRUCTURES SOLUTIONS BOEING AUSTRALIA COMPONENT REPAIRS With Boeing Australia Component Repairs Pty Ltd (BACR) the maintenance, repair and overhaul (MRO) of your aircraft structural components
More informationHighland Composites. Expandable on-site to ~188k sq. ft. (expansion area purchased and graded).
Highland Composites New state-of-the-art ~63k sq. ft. facility including 4k+ sq. ft. clean assembly room, 2k+ sq. ft. quality lab, ample shipping with dock and ramp loading. Expandable on-site to ~188k
More informationCHAPTER - 1 INTRODUCTION
CHAPTER - 1 INTRODUCTION 1. 1.1 Polymer Matrix Composites Composite materials are formed by combining two or more materials that have different properties. The constituent materials work together to give
More informationPride Pace Passion. Aerospace Defence Marine Power Generation Nuclear
Pride Pace Passion Aerospace Defence Marine Power Generation Nuclear Fully integrated precision manufacturing and assembly solutions Bromford Industries is a privately owned enterprise trading on a global
More informationComparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars. Composites Centre
Comparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars ICMAC Belfast 18 th March 2009 Andrew Mills, James Hurley SAS Cranfield University a.r.mills@cranfield.ac.uk
More informationMicro-Precision Coil and Formed Wire Products for the Medical Device Industry
Micro-Precision Coil and Formed Wire Products for the Medical Device Industry Precision Metal Components For Medical Devices Specialized, complex parts and sub-assemblies Extreme diameter and length capabilities
More informationPARAMETRIC STUDY OF FLAT SANDWICH MULTILAYER RADOME
Progress In Electromagnetics Research, PIER 66, 253 265, 2006 PARAMETRIC STUDY OF FLAT SANDWICH MULTILAYER RADOME A. Kedar and U. K. Revankar Electronics & Radar Development Establishment C.V. Raman Nagar,
More informationSpecialists in P.T.F.E
FILMS AND SHEET EXTRUDED AND MOULDED MACHINED COMPONENTS Founded as a family business in 1955, Dalau has grown to become the largest polytetrafluoroethylene (PTFE) processor in the United Kingdom and now
More informationAirframes Instructor Training Manual. Chapter 2 MATERIALS
Learning Objectives Airframes Instructor Training Manual Chapter 2 MATERIALS 1. The purpose of this chapter is to make you aware of the many different materials employed in an aircraft s structure, it
More informationComposites for offshore wind. Alun Roberts, 9 November 2011
Composites for offshore wind Alun Roberts, 9 November 2011 BVG Associates Wind and marine energy only Formed in 2005 Hands-on experience in the wind industry Market analysis Business development New technology
More informationStructural Composite Materials
Structural Composite Materials F.C. Campbell The Materials Information Society ASM International Materials Park, Ohio 44073-0002 www.asminternational.org Contents Preface About the Author xi xv Chapter
More informationFinite Element Analysis of Radome for Airborne Satellite Communication Radar
International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies 101 Finite Element Analysis of Radome for Airborne Satellite Communication
More informationStrength through cooperation. VDL Fibertech Industries
Strength through cooperation VDL Fibertech Industries VDL Fibertech Industries Composites such as carbon fiber and glass fiber are used in products like Formula 1 cars and the latest aeroplanes, tennis
More informationRM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS
RM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-3004 Out of Autoclave (OOA) Processable Bismaleimide (BMI) Prepreg Product Information Developed
More informationTrusted to deliver: Specialist vehicles designed to serve you
Trusted to deliver: Specialist vehicles designed to serve you CONTENTS 04 INTRODUCTION 07 OUR PRODUCTS 09 OUR SPECIALIST CAPABILITIES 10 INTEGRATED COMMUNICATIONS 12 WHOLE-LIFE SUPPORT 14 FOCUSED ON OUR
More informationMANUFACTURING WITH COMPOSITES 2
MANUFACTURING WITH COMPOSITES 2 WCC WEBINAR 10 th June 2011 1 AIMS OF WEBINAR To give an overview of the most important manufacturing methods for composite materials Covering suitable materials, typical
More informationINDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDU
OMPOSITES INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDU CONTENTS Introduction 3 Value Engineering for Design and Performance 4 Quality Assurance that
More informationWE TAKE ACTION. SCHÜTZ GmbH & Co. KGaA. The SCHÜTZ Group
2 WE TAKE ACTION. SCHÜTZ GmbH & Co. KGaA The SCHÜTZ Group The family-run company SCHÜTZ GmbH & Co. KGaA that was founded by Udo Schütz in 1958 has 4,000 employees at over 45 locations around the world
More informationTECHNICAL & ENGINEERING TRACK
TECHNICAL & ENGINEERING TRACK TECHNICAL & ENGINEERING TRACK - MACHINIST/TECHNICIAN Machinist/Technician The Machinist/Technician works under close supervision to carry out structured work while adhering
More informationFOAM ENGINEERING & PACKAGING SOLUTIONS SPECIALISTS IN CONVERSION. Thinking inside the box.
FOAM ENGINEERING & PACKAGING SOLUTIONS SPECIALISTS IN F O A M CONVERSION Thinking inside the box. Foams specialise in the design and manufacture of Protective Packaging Solutions. As a one-stop shop provider
More informationABOUT US / Residential Commercial Resources / Mining Infrastructure. Governmental Heritage Education Health
ABOUT US / Remtech Australia (Remtech) is an Australian owned, managed and operated provider of remedial and civil construction services. With operations across Australia, Remtech is proud of its heritage,
More informationINTRODUCTION. Total Solutions Middle East Total Solutions M.E. total. Corporate. P r ofile. Services
Oil & Gas Directory Middle East - 2013 169 INTRODUCTION provide dedicated services and applications for buildings, structures, rigs, pipelines and construction sites, specialising in the following: Rope
More informationHigh Volume Composite Component Manufacture
High Volume Composite Component Manufacture United Technologies Aerospace Systems (UTAS) (lead) and the University of Sheffield Advanced Manufacturing Research Centre (AMRC) The HVCMS (High Volume Composite
More informationHigh-performance adhesives and functional coatings for composites
Press Release 06.02.2014 Henkel at JEC Europe 2014 High-performance adhesives and functional coatings for composites As market leader in adhesives, sealants and functional coatings, Henkel is exhibiting
More informationWOVEN POLYESTER HIGH PERFORMANCE GEOGRID ACEGrid the proven choice for:
AUSTRALIAN COMPANY // GLOBAL EXPERTISE WOVEN POLYESTER HIGH PERFORMANCE GEOGRID ACEGrid the proven choice for: LONG TERM SOIL REINFORCEMENT IN APPLICATIONS OF STEEPENED REINFORCED SLOPES RETAINING WALLS
More informationWOVEN POLYESTER HIGH PERFORMANCE GEOGRID ACEGrid the proven choice for:
AUSTRALIAN COMPANY // GLOBAL EXPERTISE WOVEN POLYESTER HIGH PERFORMANCE GEOGRID ACEGrid the proven choice for: LONG TERM SOIL REINFORCEMENT IN APPLICATIONS OF STEEPENED REINFORCED SLOPES RETAINING WALLS
More informationMANUFACTURING WITH COMPOSITES 1
MANUFACTURING WITH COMPOSITES 1 WCC WEBINAR 3 rd June 2011 1 AIMS OF WEBINAR To give an overview of the most important manufacturing methods for composite materials Covering suitable materials, typical
More informationSTRUCTURAL DESIGN OF CONFORMAL LOAD BEARING ANTENNA STRUCTURE (CLAS) (PART I)
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS STRUCTURAL DESIGN OF CONFORMAL LOAD BEARING ANTENNA STRUCTURE (CLAS) (PART I) J. Kim 1 *, S. R. Ha 1, G. H. Ryu 1, M. S. Kim 2 1 Mechanical Engineering
More informationPhoenix. Tailored Engineering Solutions for Seismic and Defence Markets
Phoenix Engineering Systems Tailored Engineering Solutions for Seismic and Defence Markets Who We Are Phoenix Engineering Systems Pty Ltd is a cutting edge engineering and manufacturing business based
More informationComposite Materials. Manufacturing processes for Polymer Matrix Composites
Composite Materials Manufacturing processes for Polymer Matrix Composites Polymer Matrix Composites The method of manufacturing composites is very important to the design and outcome of the product With
More informationCreating an Aerospace Future
Creating an Aerospace Future Causeway Aero Limited has been formed by five SC21 accredited Northern Ireland aerospace companies who have come together to offer combined capabilities to the aerospace sector.
More informationZLP. Center for Lightweight- Production-Technology
ZLP Center for Lightweight- Production-Technology Center for Lightweight- Production-Technology The DLR Center for Lightweight-Production-Technology (Zentrum für Leichtbauproduktionstechnologie; ZLP) has
More informationCOMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS
24 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES COMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS H.G.S.J. Thuis National Aerospace Laboratory NLR Keywords: Composites, Resin Transfer
More informationDevelopment of Damage Tolerant Adhesive Bonded Repair
Development of Damage Tolerant Adhesive Bonded Repair More Info at Open Access Database www.ndt.net/?id=15114 V. Srinivasa, Ramesh Kumar. M, Suresh Chand Jangir, Saji. D, Pitchai. P, Sudheendra. H.N Advanced
More informationDesign and Study of Different Parameters of A Submarine Radome By Using ANSYS
Volume.2, Issue.9, Sept.2016 Design and Study of Different Parameters of A Submarine Radome By Using ANSYS Ch. John Marie Britto 1, S. Vijaya Kumar 2 1 PG Student in CAD/CAM, Department of Mechanical Engineering,
More informationHigh Performance Composite Body Panels via the Resin Spray Transfer Process. Dale Brosius Quickstep Composites LLC
High Performance Composite Body Panels via the Resin Spray Transfer Process Dale Brosius Quickstep Composites LLC SPE ACCE September 2013 Outline Background on Quickstep The challenge for lightweight carbon
More informationSCHÜTZ CORMASTER THE HIGH-TECH LIGHTWEIGHT COMPOSITE
SCHÜTZ CORMASTER THE HIGH-TECH LIGHTWEIGHT COMPOSITE WE UNITE TRADITION WITH VISIONARY POWER. The SCHÜTZ Group was founded in 1958 by Udo Schütz and presently employs over 5,000 people at more than 50
More informationFor personal use only. copyright Quickstep Holdings. All Rights Reserved.
copyright 2015. Quickstep Holdings. All Rights Reserved. Disclaimer» This Presentation is provided by Quickstep Holdings Limited ( Quickstep or the Company ) as a summary of the Company and its operations
More informationeccles The new COVER-ALL recessed range Keeping above from below
eccles The new COVER-ALL recessed range Keeping above from below Manufactured to European Standards All models in the new advanced composite range are manufactured to BS EN 124 : 1994, an exacting industry
More informationANALYSIS AND TEST STUDY OF THERMAL DEFORMATION ON A GRID REINFORCED CFRP MIRROR
ANALYSIS AND TEST STUDY OF THERMAL DEFORMATION ON A GRID REINFORCED CFRP MIRROR Xu Liang 1, Ding Jiao-teng 2, Wang Yong-jie 3, Xie Yong-jie 4, Ma Zhen 5, and Fan Xue-wu 6 1 Xi an institute of optics and
More informationScapa Photovoltaic Range. Solar Module Solutions
Scapa Photovoltaic Range Solar Module Solutions Your Partner Scapa is a leading, global supplier of technical adhesive tapes and films to major industries including automotive, cable, medical, aerospace
More informationPRECISION MACHINING & MANUFACTURING SERVICES
PRECISION MACHINING & MANUFACTURING SERVICES 03 The complete solution Proserv s Coatbridge facility is our Global Centre of Excellence (CoE) for the design, engineer, manufacture, repair and refurbishment
More informationITAR and environmental control goods approval. Consignment stocking
Through distribution of inventories strategically located in Europe and the USA for Just In Time stock solutions, we work hard to make support easier providing an effective mechanism for operators and
More informationCompoTech Technology. The CompoTech Process
CompoTech Technology Precision filament laying, pressing and machined surfaces used for composite milling ram production. CompoTech has perfected their unique axial fibre filament placement and winding
More informationORLITE INDUSTRIES. Leading in Composite Materials Solutions. Transportation Sector Overview
ORLITE INDUSTRIES Leading in Composite Materials Solutions Transportation Sector Overview 20.9.2016 About Us Established in 1959, privately held company Core expertise development and manufacturing of
More informationIndividualized mass production of tailored thermoplastic composite blanks
Individualized mass production of tailored thermoplastic composite blanks Fraunhofer Institute for Production Technology IPT Department for Fiber-Reinforced Plastics and Laser System Technology Prof. Dr.-Ing.
More informationNorth Composites Engineering
North Composites Engineering Specialists in Composite training, manufacture, processing and repair equipment supply. North Composites Engineering Ltd is a world class specialist in composite training for
More informationStructural development and optimization of rotor blades for wind turbines Lessons from the aerospace industry. Josef Mendler Christoph Katzenschwanz
Structural development and optimization of rotor blades for wind turbines Lessons from the aerospace industry Josef Mendler Christoph Katzenschwanz ACENTISS 2009 1 Design Study of Segmented Rotor Blades
More informationCobham Mission Equipment
Providing Mission Capability and Support The most important thing we build is trust AIR TO Air Refuelling Systems Nose to Tail Refuelling Capability Weapons Carriage & Release Wingtip to Wingtip Mission
More informationAdvanced Sensors and Novel Concepts for Intelligent and Reliable Processing in Bonded Repairs the SENARIO project
Advanced Sensors and Novel Concepts for Intelligent and Reliable Processing in Bonded Repairs the SENARIO project presented by Mr. David Hernández Rodero SENER & SENARIO Consortium the results of an EC
More informationLockheed Martin C-130
Through distribution of inventories strategically located in Europe and the USA for Just In Time stock solutions, we work hard to make support easier providing an effective mechanism for operators and
More informationMICROWAVE INSPECTION METHOD AND ITS APPLICATION TO FRP
MICROWAVE INSPECTION METHOD AND ITS APPLICATION TO FRP MTI AmeriTAC 2013 Robert J Stakenborghs General Manager Evisive, Inc. Baton Rouge, Louisiana, USA 1 OBJECTIVES Describe FRP and GRP Discuss failure
More informationSMART Wind Consortium
SMART Wind Consortium Subgroup Leads SMART Wind Launch October 16, 2014 Composite subgroup lead Pier Marzocca, Ph.D. Professor of Mechanical and Aeronautical Engineering, Clarkson University Potsdam, NY
More informationProducing composite mouldings using prepreg laminating techniques
Unit 044 Producing composite mouldings using prepreg Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to produce
More informationComposite Simulation as Example of Industry Experience
Composite Simulation as Example of Industry Experience Joachim Bauer To cite this version: Joachim Bauer. Composite Simulation as Example of Industry Experience. George L. Kovács; Detlef Kochan. 6th Programming
More informationagain! highlights on board Advanced Materials CMS is very proud to be once again Official Supplier of ORACLE Racing March 2011
Advanced Materials highlights March 2011 Photo: Gilles Martin-Raget / ORACLE Racing on board again! CMS is very proud to be once again Official Supplier of ORACLE Racing Photo: Gilles Martin-Raget / ORACLE
More informationTECHNOLOGY SOLUTIONS
TECHNOLOGY SOLUTIONS DRIVE CONTROL AUTOMATION As a leading Global Drive, Control and Automation System Integrator, we use a considered portfolio of products to deliver robust, reliable and flexible solutions
More informationReview of Composite Materials and Applications
Review of Composite Materials and Applications M.K.S.Sai Department of Mechanical Engineering VBIT, Hyderabad, Telangana, India Abstract- This study demonstrates the need of composite materials over common
More informationLaser Ultrasonics Inspections of Aeronautical Components with High Cadence and Geometrical Variations, Manufactured by RTM: Resin Transfer Moulding
6th International Symposium on NDT in Aerospace, 12-14th November 2014, Madrid, Spain - www.ndt.net/app.aerondt2014 More Info at Open Access Database www.ndt.net/?id=16958 Laser Ultrasonics Inspections
More informationFrom design to delivery. Technical Moulding. Our complete service offer for technical moulding.
From design to delivery Our complete service offer for technical moulding Technical Moulding We ve always been dedicated to producing top quality products delivered on time. We wouldn t have been in the
More informationSECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System
SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF MODULAR PAN SYSTEM PART 1 GENERAL 1.1
More informationAcoustic Vibration Isolation Bearings
T R EL L EB O RG EN G I N EER ED PR O D U C T S Acoustic Vibration Isolation Bearings T R EL L EB O RG EN G I N EER ED PR O D U C T S Trelleborg is a global supplier of acoustic bearings for building isolation.
More informationOEM Quality CFRP Parts
in association with OEM Quality CFRP Parts Dr. Ken Kendall Martin Starkey Head of New Technologies - Aston Martin Lagonda Ltd Automotive Technical Manager - Gurit SPE Automotive Composites Sept 12-14,
More informationHistory in the Making
History in the Making Andrew Industries Group and the BMP Division continue our strong growth and global reach for over 100 years. 1894 Founded Andrew Industries 1974 Founded the BMP Division 1982 Founded
More informationSIGRAFIL C. The PAN-Based Carbon Fiber. Carbon Fibers. Broad Base. Best Solutions.
The PAN-Based Carbon Fiber Carbon Fibers Broad Base. Best Solutions. Carbon Fibers & Composite Materials Unique Integrated Value Chain We are SGL Group The Carbon Company, one of the worldwide leading
More informationAim. Unit abstract. Learning outcomes. QCF level: 6 Credit value: 15
Unit T14: Advanced Materials Unit code: L/503/7412 QCF level: 6 Credit value: 15 Aim This unit aims to develop learners understanding of appropriate materials and processes used to ensure the structural
More informationRadomes & Antennas. Low Dielectric Composites. Product Selection Guide
Tencate Advanced Composites Radomes & Antennas Low Composites Product Selection Guide Tencate Radomes & Antennas Radome & Antenna Composites TenCate Advanced Composites is a leading supplier of advanced
More informationPlastic Moulding. Optical Moulding Technical Moulding Formed-in-Place Gasketing. Plastic Moulding
Plastic Moulding Plastic Moulding Optical Moulding Technical Moulding Formed-in-Place Gasketing Designed and Manufactured in the UK Edition 2 01420 470400 www.fernhoward.com/plastic-moulding Fern-Howard
More informationHIGH-VOLUME MANUFACTURE OF A COMPOSITE DOOR MODULE BY A NOVEL 3D-PREFORM TECHNOLOGY
HIGH-VOLUME MANUFACTURE OF A COMPOSITE DOOR MODULE BY A NOVEL 3D-PREFORM TECHNOLOGY Queein Chang-Manson and Ah Yeong Park EELCEE Ltd., Gunpo IT Valley A-106, 148, Gosan-ro, Gunpo-si, Gyeonggi-do, South
More informationFOAM IN NEW DIMENSIONS
FOAM IN NEW DIMENSIONS Seite 2 Examples of use 3 3D CORE Benefits and function 4 3D CORE Product range 5 6 Comparison of technical values 7 8 Comparison of cost and weight 9 Foam Core Navigator 10 11 Tips
More informationRM-3002 BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS
RM-3002 BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-3002 Bismaleimide (BMI) Prepreg Product Information Developed using state-of-the-art formulating technologies, RM-3002
More informationQUALITY INSPIRES. Advanced thermoplastic composites
QUALITY INSPIRES. Advanced thermoplastic composites DEFINING LEADING SOLUTIONS IN THERMO- PLASTIC COMPOSITES Tepex is a high performance composite laminate system made with thermoplastic polymers. The
More informationGrey and Ductile Cast Iron Components Engineered and Manufactured to your Specifications. Quality Castings. Manufactured in the UK
Grey and Ductile Cast Iron Components Engineered and Manufactured to your Specifications Quality Castings Manufactured in the UK Reliable, Cost- Reliable, cost-effective, UK based manufacturing At Thomas
More informationComposite Repairs for Pipelines
ABN 69 003 696 526 Composite Repairs for Pipelines TGN-W-01 Rev: 0 Date: 1 March 2006 Pages: 5 1. SCOPE This document provides an introduction to the use of composite materials as a methodology for repairing
More informationwww.pallite.co.uk THE PALLITE RANGE LIGHTWEIGHT PAPER PALLETS, PALLET BOXES AND COMPONENTS DESIGNED TO REDUCE THE TOTAL COST OF DELIVERY. PALLITE is a range of strong and recyclable transit packaging providing
More informationProducing composite mouldings using prepreg
Unit 844 Producing composite mouldings using pre-preg laminating components UAN: L/600/5943 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
More informationEXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR UNDERGROUND/SUBURBAN RAILWAYS. Construction Automotive Industry
EXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR UNDERGROUND/SUBURBAN RAILWAYS www.rehau.com Construction Automotive Industry EXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR
More informationDevelopment of an Ultrasonic System for C-Scan of Aircraft Components
Development of an Ultrasonic System for C-Scan of Aircraft Components More info about this article: http://www.ndt.net/?id=22346 Abstract K. Chandran, Tejas Tadpatrikar, G. Prashanth, Pradeep Sangvikar
More informationHexPly M79. Low Temperature Curing Epoxy Matrix Product Datasheet
Low Temperature Curing Epoxy Matrix Product Datasheet Description M79 is a formulated epoxy resin matrix, specially designed for prepreg applications where a cure temperature below 100 C is required. The
More informationComposites methods development under the next generation composite wing (NGCW) research programme
Composites methods development under the next generation composite wing (NGCW) research programme 032 Tim Edwards Chief Structural Engineer Defence, Aerospace and Communications Atkins Bristol, UK Abstract
More informationYour chemical. Our know-how.
Your chemical. Our know-how. WES Corporate Brochure v2.indd 2 06/05/2015 21:13 Uniquely, chemical dosing is not a division of WES, it is WES. Undiluted thinking equates to unrivalled expertise WES Corporate
More informationEXPERTS IN PRECISION ALUMINIUM EXTRUSION
EXPERTS IN PRECISION ALUMINIUM EXTRUSION YOUR EXTRUSION EXPERTS SMART ALUMINIUM EXTRUSIONS is one of the UK s leading producers and suppliers of bespoke aluminium extrusion systems, with a reputation for
More informationSEMAE3204 Producing aircraft composite mouldings using resin flow infusion techniques
Producing aircraft composite mouldings using resin flow infusion techniques Overview This standard identifies the competences you need to produce aircraft composite mouldings (such as moulds and components)
More informationMaximum productivity, minimum unit costs
ENGEL to set more milestones in composite technologies at K 2013 Maximum productivity, minimum unit costs Schwertberg, Austria October 2013. Orientated fibre systems have become a research priority in
More informationACMC/SAMPE Conference on Marine Composites Plymouth, September 2003 (ISBN )
PERFORMANCE OF AUTOMATED ULTRASONIC INSPECTION OF LARGE-SCALE SANDWICH STRUCTURES IN NAVAL SHIPS ABSTRACT Thomas Wulf Plastics and Composites, FORCE Technology, DK-9220 Aalborg East, Denmark On basis of
More informationMICRA COORDINATE MEASURING MACHINE PRODUCT BROCHURE
MICRA COORDINATE MEASURING MACHINE PRODUCT BROCHURE The mini CMM that delivers maximum performance. For real experts. MICRA PERFECT IN EVERY SMALL DETAIL The MICRA coordinate measuring machine (CMM) is
More informationDamen Schelde Naval Shipbuilding. External adhesively bonded FRP ventilation ducts
Damen Schelde Naval Shipbuilding External adhesively bonded FRP ventilation ducts 1 Content Content: Problem definition Solution in principle Technical specification Project planning Design approach &
More informationComposites Composite Production Methods. Remko Akkerman Laurent Warnet C O M PO SI T ES GRO U P U N I V ERSI T Y O F T W EN T E
C O M PO SI T ES GRO U P Composites 2008-09 Composite Production Methods U N I V ERSI T Y O F T W EN T E Remko Akkerman Laurent Warnet fibre glass carbon... resin impregnation thermoplastic thermoset CFRP
More informationAdvanced Composite Materials for Aerospace
Advanced Composite Materials for Aerospace COMPOSITE MATERIALS Focusing on innovation, advanced technology and application expertize allows Solvay to develop and manufacture products that change the way
More informationProperty Refurbishment Resin Flooring Flooring Products Commercial Cleaning Specialist Cleaning Commercial Painting & Decorating
Property Refurbishment Resin Flooring Flooring Products Commercial Cleaning Specialist Cleaning Commercial Painting & Decorating Introduction Zenith Contract Services comprises four divisions: refitment
More informationintroduction Introduction.1 contents Irrigation Warehouse Group Pty Ltd Ph
contents Vinidex the Company 3 Quality Policy 3 Product Background 4 Worldwide Use 4 Australian Use 4 Pipe Extrusion 5 Fittings 6 End Treatments 6 Product Standards 7 Relevant Australian Standards 7 Introduction.1
More informationTemperature Controlled Hygienic Environments
Temperature Controlled Hygienic Environments part of the Working with Stancold: Professional from start to finish Cold Storage 0 C to -40 C. Internal Insulated box-within-abox wall and ceiling panel system,
More informationConstruction of a One-Third Scale Model of the National Aerospace Plane-NASP*
Int. J. Engng Ed. Vol. 13, No. 2, p. 153±159, 1997 0949-149X/91 $3.00+0.00 Printed in Great Britain. # 1997 TEMPUS Publications. Construction of a One-Third Scale Model of the National Aerospace Plane-NASP*
More informationI N T E R N A T I O N A L LT D
INTERNATIONAL LT D Leaders in investment and sand casting. Aeromet is a leading supplier of aluminium and magnesium castings, and fully-finished, assembly ready cast parts for the aerospace and defence
More informationSEMCOMP2-09 Using resin transfer moulding techniques to produce composite mouldings
Using resin transfer moulding techniques to produce composite Overview This standard identifies the competences you need to produce composite using resin transfer moulding techniques, in accordance with
More information