FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU.

Transcription

1 FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU.

2 WHY UZIN SCREEDS & ADDITIVES? In the current fast moving and dynamic environment, time is Benefits of UZIN Screeds & Additives: money. Floors need to be installed quickly and be available Superior product performance combining consistent and to other trades in the shortest time possible. UZIN s compre- reliable drying characteristics with optimum strength and hensive flooring products range, consisting of additives as durability well as industrial and commercial screeds have been develo- Saves valuable time and money ped for optimum speed, durability, strength, smoothness and and speed of application allows faster access are the most technically advanced products on the market. PRODUCT OVERVIEW 4-5 for following trades Easy to use and most technologically advanced screeds UZIN provide expert technical support and back up to ensure CONTENTS and additives correct product specification and performance with on-site Low stress, minimal shrinkage and less prone to cracking inspection, supervision and nationwide training. Suitable for use with underfloor heating systems Manufactured under the BSI Quality Assurance Schemes ISO 9001 and ISO SCREEDS SC 960 Rapid Screed Cement SC 970 Low Shrink Cement (10-14 days) EX 24 Turbo Rapid Drying Pre-mixed Screed SC 980 Low Shrink Rapid Cement SC 910 Special Binder for the creation of lightweight screeds SC 914 Rapid Lightweight Mortar Turbolight System SCREED ADDITIVES AS 31 Basic Additive AS 41 Strong Additive AS 51 Express Additive PRIMERS & DAMP PROOF MEMBRANES PE 360 Dispersion Primer PE 480 Epoxy DPM SEALER SC 1800 Finish Sealer 15 The brief descriptions of products should only be used as a guide. Detailed product data sheets for all products are available which should be used as reference when using the products. 2 3

3 PRODUCT OVERVIEW PRODUCT DESCRIPTION MIX RATIO STRENGTH CLASS (28 DAYS) CONSUMPTION PACK SIZE SET FOR FOOT TRAFFIC* HEAT DRYING* READY FOR COVERING* WATER QUANTITY WATER / CEMENT VALUE WORKING TEMPERATURE MIXING TIME WORKING TIME* SC 960 Rapid screed 1:4 C40 / F6 4 kg/m²/cm 1:5 C35 / F kg/m²/cm 1:6 C25 / F kg/m²/cm 25 kg 3-5 hours 3 days 1 to 7 days depending on the mixing ratio & floor covering litres (according to sand) Max SC 970 Low shrink 1:6 C30 / F kg/m²/cm 25 kg 16 hours 3 days days litres (according to sand) 0.5 to SC 980 Low shrink rapid 1:4 C40 / F6 4 kg/m²/cm 1:5 C35 / F kg/m²/cm 1:6 C25 / F kg/m²/cm 25 kg 12 hours 3 days 1 to 5 days depending on the mixing ratio & floor covering litres (according to sand) Max EX 24 TURBO Rapid drying premixed screed - C30 / F kg/m²/ cm 25 kg 8 hours - 1 to 7 days 2.5 litres - 30 C/86 F - 30 SC 910 Special binder for creation of lightweight screed kg 1 day - 2 days litres (according to system) - 10 C/50 F to SC 914 TURBO Rapid lightweight mortar N/mm kg/m²/cm 21 kg 12 hours - 2 days litres per bag AS 31 BASIC Cement additive 1:6 F % weight of 20 kg 3 days 7 days Depends on the climatic conditions, thickness and sand Depends on the sand Max 0.5 Above 5 C/41 F AS 41 STRONG High strength additive 1:4 C50 / F6 1:5 C40 / F6 1% weight of 20 kg 3 days 7 days Depends on the climatic conditions, thickness and sand Depends on the sand Max 0.5 Above 5 C/41 F AS 51 EXPRESS Powder based additive 1:6 C25 / F5 0.25% weight of 10 kg 24 hours 5 days days Depends on the sand Max 0.5 Above 5 C/41 F *Dependant on the temperature and humidity as well as the type of floor covering installed and mixing ratio (if applicable). Please consult the product data sheet for each product before use

4 SCREEDS SC 960 Rapid Screed Cement Special binder for producing very rapid drying screeds in interior and exterior locations. Very rapid setting, saves time Variable mix ratio, versatile in use and applications For producing bonded screeds, floating screeds & screeds on separating membranes High strength yet low stress Waterproof and frost-resistant SC 970 Low Shrink Cement This itious binder helps in the production of low stress screeds. Extremely low susceptibility to cracking, minimal need for joints or crack-inducing joints Low shrinkage even on large areas For bonded screeds, screeds on a separating membrane Very easy to install Exceptional working properties, even during unfavourable climate conditions Waterproof Joint free bays up to 200 m² EX 24 TURBO Rapid Drying Pre-mixed Screed To help you save time we have developed a rapid drying pre-mixed screed, which is ready for foot traffic after only 8 hours. Deformation-free and low-tension creating a low shrinkage itious screed For bonded screeds, screeds on a separating membrane Sound and heat insulation Easy to use and only requires mixing with water Item Number: kg * after 3 5 hours* after 1 to 7 days* after 3 days For interior and exterior use Mix ratio: Consumption: Strength class (28 days): 1:4 4 kg/m²/cm C40 / F6 1: kg/m²/cm C35 / F5 1: kg/m²/cm C25 / F4 Item Number: kg * after 16 hours* after days* after 3 days For residential or commercial flooring For interior use Mix ratio: Consumption: Strength class (28 days): 1: kg/m²/cm C30 / F5 Item Number: kg approx. 30 * after 8 hours* after 1 to 7 days* - For residential or commercial flooring For interior and exterior use Mix ratio: Consumption: Strength class (28 days): kg/m² /cm C30 / F6 *Dependant on the temperature and humidity as well as the type of floor covering installed and mixing ratio (if applicable). Please consult the product data sheet for each product before use

5 SCREEDS FEATURED PRODUCT Joint free bays up to 200 m² SC 980 Low Shrink Rapid Cement SC 980 binder retains water when curing so dries extremely quickly regardless of climate conditions and screed thickness. It incorporates the latest technology so deformation, cracks and shrinkage are avoided. It also produces a smooth, wear surface when sealed with SC 1800 Finish Sealer. Extremely low incidence of cracking, free from deformation and low-stress Rapid setting even during unfavourable weather conditions Variable mix ratio, versatile in use and applications For producing bonded screeds, floating screeds & screeds on separating membranes High strength and very easy to install Water-resistant Item Number: kg * after 12 hours* For interior and exterior use after 3 days Slurry bonding agent: Water & sand Epoxy bonding agent: PE 480 Ready for floor coverings:* Mixing ratio: Mixing ratio for 300 kg sand**: Consumption: Strength class (28 days): Ceramic tiles: Carpet, vinyl, lino & rubber: Wood flooring: 1:4 2 sacks (50 kg) 4 kg/m²/cm C40 / F6 1 day 2 days 3 days 1:5 2 1 /2 sacks (62.5 kg) 3.20 kg/m²/cm C35 / F5 1 day 3 days 5 days 1:6 3 sacks (75 kg) 2.60 kg/m²/cm C25 / F4 2 days 5 days - Underfloor heating system for ceramic tiles Brillant Cristal Flexible Rapid Setting Coloured Grout Ceramic tile RX 6 Turbo Rapid Setting Flexible Adhesive Hydrostop Sealing & Decoupling Membrane Power RX 6 Turbo Rapid Setting Flexible Adhesive FG 300 Primer SC 980 Low Shrink Rapid Cement Under Floor Heating Concrete We can provide fully compatible systems for any type of floors including, carpets, vinyl, rubber, LVTs, wood, porcelain, ceramic, stone and resin. * Dependant on the temperature and humidity as well as the type of floor covering installed and mixing ratio (if applicable). Please consult the product data sheet for each product before use. **Mixing ratio for 200 l pump with approx. 300 kg screed sand

6 SCREEDS SCREEDS TURBOLIGHT -SYSTEM SC 910 Special Binder for the creation of lightweight screeds Special screed for use with Styrofoam Granulates to create lightweight screeds. For use as a lightweight mortar and system component for the UZIN Turbolight System For certified Thermozell and Diaperl Styrofoam granulates SC 914 TURBO Rapid Lightweight Mortar Helps produce extremely lightweight and highly heat-insulating substrates. For producing lightweight bonded screeds or screeds on separating membranes and system component for the UZIN Turbolight System Deformation-free and low stress For use over concrete or wooden floors Item Number: kg 60 * after 1 day* after 2 days* * * For interior and exterior use* Item Number: kg 30 * after 12 hours* after 2 days* * * For interior and exterior use* TURBOLIGHT -SYSTEM Rapid construction and renovation system A quick, ultra lightweight and flexible system to create substrates prior to the installation of all types of floor coverings. For renovating uneven surfaces, deformed or problematic substrates Flooring construction with low weight and height requirements For use as a bonded screed or separating membrane For use over concrete or wooden floors Ultra lightweight Good sound absorption, highly heat insulating and flame-retardant Suitable for wet rooms* Turbolight -System on concrete subfloors: Thin screed SC 995 RR 201 renovation fleece Rapid lightweight mortar SC 914 Turbo Dispersion primer PE 360 Concrete subfloor For internal and external use* Article No. UZIN Turbolight -System Component Description Pack Size 6069 PE 360 Dispersion Primer 10 kg canister 6072 PE 360 Dispersion Primer 5 kg canister SC 914 Turbo Rapid lightweight mortar 21 kg sack SC 910 Special binder for the creation of lightweight screeds 25 kg sack RR 201 Renovation fleece 25 x 1.05 m roll RR 201 Renovation fleece 75 x 1.05 m roll SC 995 Cementitious thin screed 25 kg sack *Please consult the product data sheets before use. *Please consult the product data sheet for each product before use. *Please consult the product data sheet for each product before use

7 SCREED ADDITIVES SCREED ADDITIVES - AS 31 BASIC Cement Additive Additive for modifying and strengthening itious screeds. Increases the flexural strength Reduces the required amount of mixing water and helps reduce shrinkage For producing bonded screeds, floating screeds & screeds on separating membranes Easy to use Does not corrode heating pipes Does not affect the emission characteristics of emission controlled screed mortars AS 41 STRONG Cement Additive Improves the strength of itious screeds whilst helping reduce cracks. Produces an extremely high strength screed Helps prevents shrinkage and improves the heat transfer with hot water underfloor heating For constructing bonded screeds, floating screeds & screeds on separating membranes Reduces the amount of water required Reduces tension and cracks Does not affect the emission characteristics of emission controlled screed mortars Item Number: For residential & commercial flooring For interior and exterior use Mix ratio: Item Number: For residential, commercial and industrial flooring For interior and exterior use Mix ratio: 20 kg * after 3 days* depends on the climatic conditions, thickness and sand* 7 days Strength class (28 days): 1:6 F4 20 kg after 3 days* depends on the climatic conditions, thickness and sand* 7 days Strength class (28 days): 1:4 C50 / F6 1:5 C40 / F6 FEATURED PRODUCT Excellent consumption & shortens the setting time! AS 51 EXPRESS Powder Based Cement Additive Highly effective screed additive to help shorten the setting time and reduces the amount of water required for itious screeds. Increases the strength and reduces cracks within the screed. Shortens the setting time, reduces tension and cracks Minimises shrinkage and increases strength For producing bonded screeds, floating screeds & screeds on separating membranes Reduces the amount of water up to 25 % Shortens the setting time Increases strength Addition as powder and includes measuring cup Does not affect the emission characteristics of emission controlled screeds Item Number: kg * after 24 hours* after days* For residential & commercial flooring 5 days For interior and exterior use Mix ratio: Strength class (28 days): 1:6 C25 / F5 *Dependant on the temperature and humidity as well as the screed thickness and type of sand used. Please consult the product data sheet for each product before use. *Dependant on the temperature and humidity as well as the screed thickness and type of sand used. Please consult the product data sheet for each product before use

8 PRIMER & DAMP PROOF MEMBRANE SEALER - FEATURED PRODUCT PE 360 Dispersion Primer Rapid drying, dispersion primer for absorbent substrates. Fast drying Binds surface dust and reduces absorbency of the substrate For use on or calcium sulphate screeds PE 480 Epoxy DPM Epoxy damp proof membrane for substrates with very high moisture content above 99 % RH (2 coats) Cures on wet surfaces Can be used as a 1 or 2 coat DPM For use on or calcium sulphate screeds or as an epoxy bonding agent with SC 980* Item Number / Drying time: kg canister kg canister * Consumption: g/m 2 * For interior use Item Number / Pot-life: Set to foot traffic / load bearing: Final strength: Consumption: For interior and exterior use kg drum kg drum * after hours* after 3 5 days* g /m 2 per coat* Excellent surface protection! SC 1800 FINISH 2-Component silicate sealer Silicate sealer for protecting SC 980 rapid drying screed when used as a wear coat. The sealer penetrates the surface and chemically bonds with the substrate. Increases resistance against water, road salt, fuels and lubricants Less dirt prone and improves cleaning properties For use on SC 980 rapid drying screed Easy to apply Good penetration capacity Quick drying Open to vapour diffusion For high mechanical loads Item Number: Ready for loads: For interior use 2.5 kg 60 * after 1 2 hours per coat* after 24 hours* *Dependant on the temperature and humidity as well as the type substrate and type of flooring installed. Please consult the product data sheet for each product before use. *Dependant on the temperature and humidity as well as the type substrate and type of flooring installed. Please consult the product data sheet for each product before use

9 UZIN A Brand of Uzin Ltd Uzin Ltd. Unit 2, Mitchell Court Central Park, Rugby Warwickshire, CV23 0UY Telephone +44 (0) Fax +44 (0) info@uzin.co.uk Internet / ms