Code Compliance Research Report CCRR-0185

Transcription

1 Code Compliance Research Report CCRR-0185 Issue Date: Renewal Date: Revision Date: DIVISION: WOOD, PLASTICS, AND COMPOSITES Section: Structural Plastics Section: Plastic Railings Tapco International Corporation 3939 Timbro Drive Metamora, MI REPORT SUBJECT: Plus Vinyl Railing Systems: Classic Commercial Standard Horizontal Standard Vertical T-Rail Sold Under the Brands: Builders Edge & Mid-America Beck Road Wixom MI SCOPE OF EVALUATION This research report addresses compliance with the following Codes: 2015 International Building Code (IBC) 2015 International Residential Code (IRC) 2012 International Building Code (IBC) 2012 International Residential Code (IRC) Plus Vinyl Railing Systems have been evaluated for the following properties: Structural Performance Durability Surface Burning 2.0 USES 2.1. Plus vinyl railing systems identified in this report are guards or guardrails under the definitions of the referenced codes intended for use on elevated walking areas of buildings and walkways as required by the referenced codes Plus vinyl railing systems are recognized in this report may be used in One- and Two-Family Dwellings regulated by the IRC and all construction types regulated by the IBC in accordance with Section , Exception 2. Guardrails less than 42 inches high are limited to use in One- and Two-Family Dwellings (IRC). See Table 1 for additional restrictions based upon Use an Occupancy classification. 3.0 DESCRIPTION 3.1. Guardrail Assemblies Railing systems are provided as level guardrails for level walking areas such as decks, balconies and porches, and sloped guards for open sides of stairways. See Table 1 for qualified guardrail lengths and heights Materials and Processes Railings are an assemblage of co-extruded and molded components utilizing Poly Vinyl Chloride (PVC) material with aluminum reinforcements. The PVC components are produced in three colors: Clay, Sandstone, and White. The systems consist of the following components: The Classic top rail is a contour co-extruded PVC breadloaf profile with overall dimensions of 2.7 wide at the top by 2.2 tall with a nominal 0.09 wall thickness. See Figure The T-Rail top rail is a co-extruded PVC T profile with overall dimensions of 3.5 wide at the top and 2 wide at the bottom by 3.5 tall with a nominal 0.09 wall thickness. See Figure The Classic and T-Rail bottom rails are a coextruded PVC rectangle profile with overall dimensions of 2 wide by 3.5 tall with a nominal 0.09 wall thickness. See Figure 3.

2 Code Compliance Research Report CCRR-0185 Page 2 of The Commercial, Standard Horizontal, and Standard Vertical top and bottom rails are a coextruded PVC rectangle profile with overall dimensions of 2 wide by 3.5 tall with a nominal 0.09 wall thickness. See Figure Balusters are provided in two styles: 1.25 square, hollow, extruded PVC picket or 1.25 hollow, thermoformed PVC spindle. See Figure 4 and Figure An extruded 6005-T5 aluminum alloy H insert, with overall dimensions of wide by tall and nominal thickness of is used to provide reinforcement for the top rails of the Classic railing systems. See Figure An extruded 6005-T5 aluminum alloy Heavy U insert, with overall dimensions of 1.75 wide by tall is used to provide reinforcement for the top and bottom rails of the Commercial railing systems. See Figure An extruded 6005-T5 aluminum alloy Modified H insert, with overall dimensions of 1.76 wide by 3.26 tall is used to provide reinforcement for the top and bottom rails of the Standard Horizontal, Standard Vertical, and T-Rail railing systems and the bottom rail of the Classic railing systems. See Figure Top and bottom rails are connected to posts using a combination of PVC, polycarbonate and nylon mounting brackets. See Table 1 and Figure 9 through Figure PERFORMANCE CHARACTERISTICS 4.1. Plus vinyl railing systems described in this report have demonstrated the capacity to resist the design loads specified in Chapter 16 of the IBC and Section R301 of the IRC when tested in accordance with ICC- ES AC174 and ASTM D Structural performance has been demonstrated for a temperature range from -20 F to 125 F Materials used are deemed equivalent to preservative treated or naturally durable wood for resistance to weathering effects, decay, and attack from termites. 200 when tested according to ASTM E84, as required by AC INSTALLATION Installation shall be in accordance with the manufacturer's installation instructions and this report. Where differences occur between this report and the manufacturer's installation instructions, this report shall govern Railing assemblies consist of top and bottom rails with pre-routed holes to receive balusters. Aluminum railing reinforcements are inserted in the rails during assembly as specified for the series/model (see Table 1) The top and bottom rails are attached directly to structural supports utilizing mounting brackets and fasteners as stipulated in Table 1 and Table The top and bottom rails may be attached to conventional wood supports. The wood in the supporting structure including support posts shall have a specific gravity of 0.50 or greater (Southern Yellow Pine or better) and a minimum thickness to allow full penetration of the bracket mounting screws x4 conventional wood posts may be covered by a non-structural PVC post sleeve with decorative caps and moldings. 6.0 SUPPORTING EVIDENCE 6.1. Drawings and installation instructions submitted by the manufacturer Reports of testing and engineering analysis demonstrating compliance with ICC-ES AC174, Acceptance Criteria for Deck Board Span Ratings and Guardrail Systems (Guards and Handrails), revised December Reports of testing and engineering analysis demonstrating compliance with the performance requirements of ASTM D and ASTM D a, Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails) PVC materials used in the Plus vinyl railing systems have a flame spread index not greater than

3 Code Compliance Research Report CCRR-0185 Page 3 of Documentation of an Intertek approved quality control system for the manufacturing of products recognized in this report. 7.0 CONDITION OF USE The guardrail assemblies identified in this report are deemed to comply with the intent of the provisions of the referenced building codes subject to the following conditions: 7.1. Guards recognized in this report and regulated by the IBC or IRC are limited to exterior use. 36-inch high guards are limited to use in One- and Two-Family Dwellings under the IRC Conventional wood supports for guardrails are not within the scope of this report and are subject to evaluation and approval by the building official. Supports must satisfy the design load requirements specified in Chapter 16 of the IBC and must provide suitable material for anchorage of the rail brackets. Where required by the building official, engineering calculations and details shall be provided. in accordance with the manufacturer's approved quality control system with inspections by Intertek. 8.0 IDENTIFICATION Plus vinyl railing systems produced in accordance with this report shall be identified with labeling on the individual components or the packaging that includes the following information: 8.1. Name and/or trademark of the manufacturer; 8.2. The following statement: See CCRR-0185 at for uses and performance levels ; 8.3. For the 36 guardrails the following statement: For Use in One- and Two-Family Dwellings Only ; 8.4. The Intertek Code Compliance Research Report mark and number (CCRR-0185) Compatibility of fasteners and other metallic components with the supporting structure, including chemically treated wood, is not within the scope of this report Only those types of fasteners and fastening methods described in this report have been evaluated for the installation of the Plus vinyl railing systems; other methods of attachment are outside the scope of this report Compatibility of the supporting construction materials with all fasteners, metal post mount components, and other hardware components are subject to approval by the code official Plus vinyl railing systems reported herein are manufactured by Tapco International, in Metamora, MI 9.0 CODE COMPLIANCE RESEARCH REPORT USE 9.1. Approval of building products and/or materials can only be granted by a building official having legal authority in the specific jurisdiction where approval is sought Code Compliance Research Reports shall not be used in any manner that implies an endorsement of the product by Intertek Reference to the Intertek website address: whdirectory.intertek.com is recommended to ascertain the current version and status of this report. This Code Compliance Research Report ( Report ) is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Report. Only the Client is authorized to permit copying or distribution of this Report and then only in its entirety, and the Client shall not use the Report in a misleading manner. Client further agrees and understands that reliance upon the Report is limited to the representations made therein. The Report is not an endorsement or recommendation for use of the subject and/or product described herein. This Report is not the Intertek Listing Report covering the subject product and utilized for Intertek Certification and this Report does not represent authorization for the use of any Intertek certification marks. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.

4 Code Compliance Research Report CCRR-0185 Page 4 of 12 Table 1 Guardrail Details and Code Occupancy Classification Plus Guardrail Bracket Aluminum Insert Baluster Guardrail Dimensions (1) Code Occupancy Classification Classic Stair Classic Rail Bracket Kit (Figure 9) Classic Stair Rail Bracket Kit (Figure 15) Top Rail: H Bottom Rail: Modified H Top Rail: H Bottom Rail: Modified H Spindle or Picket Spindle or Picket 120 by by 36 Standard Horizontal Standard Vertical Stair Standard Horizontal Rail Bracket Kit (Figure 10) Standard Vertical Rail Bracket Kit (Figure 11) Commercial Rail Bracket Kit (Figure 13) Stair Rail Bracket Kit (Figure 16) Modified H Picket 120 by 36 Modified H Modified H Picket 120 by 36 Picket 116 by 36 The use of these products shall be limited to one- and two-family dwellings in accordance with the IRC and residential use groups under the IBC that permit construction in accordance with the IRC. T-Rail Stair Backplate Straight-Stair Bracket (Figure 12) T Stair Rail Bracket Kit (Figure 14) Modified H Modified H Spindle or Picket Spindle or Picket 120 by by 36 Commercial Stair Commercial Rail Bracket Kit (Figure 13) Stair Rail Bracket Kit (Figure 16) Heavy U Heavy U Picket 120 by 42 IRC: One- and Two-Family Dwellings Picket 98-1/2 by 42 IBC: All Use Groups (1) Guardrails are qualified up to and including the listed maximum guardrail system dimensions for use in the referenced Code Occupancy Classification. Guardrail lengths are actual railing lengths, i.e. clear space between supports for level rails and sloping length of rail between supports for stair rail.

5 Code Compliance Research Report CCRR-0185 Page 5 of 12 Table 2 Fastening Schedule Clubhouse Plus Guardrail Connection Fastener Qty. Top Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 2 Classic Standard Horizontal Standard Vertical Classic T-Rail Commercial Stair Stair Top Rail Bracket to Rail #10 x 1-1/2 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Post #10 x 3/4 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Rail Slip fit No mechanical connection - Top Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 2 Top Rail Bracket to Rail #10 x 1-1/2 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Post #10 x 3/4 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Rail Slip fit No mechanical connection - Top Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 4 Top Rail Bracket to Rail #10 x 1 stainless steel, self-starting, flat-head screws 2 Top Rail Bracket Angle Adjustment #10 x 1-1/2 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 4 Bottom Rail Bracket to Rail Slip fit No mechanical connection - Bottom Rail Bracket Angle Adjustment #10 x 1-1/2 stainless steel, self-starting, pan-head screws 1 Top / Bottom Rail Bracket to Post #12 x 1 stainless steel, self-starting, flat-head screws 4 Top / Bottom Rail Bracket to Rail #12 x 1 stainless steel, self-starting, flat-head screws 4 Top Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 4 Top Rail Bracket to Rail #10 x 1 stainless steel, self-starting, flat-head screws 2 Top Rail Bracket Angle Adjustment #10 x 1 stainless steel, self-starting, pan-head screws 2 Bottom Rail Bracket to Post #10 x 1-1/2 stainless steel, self-starting, pan-head screws 4 Bottom Rail Bracket to Rail Slip fit No mechanical connection - Bottom Rail Bracket Angle Adjustment #10 x 1 stainless steel, self-starting, pan-head screws 1

6 Code Compliance Research Report CCRR-0185 Page 6 of 12 Figure 1 Classic Top Rail Figure 2 T-Rail Top Rail Figure 3 2 by 3.5 Rectangular Rail Top Rail of: Commercial, Standard Horizontal & Vertical Bottom Rail of: All Plus railings Figure 4 Square PVC Picket

7 Code Compliance Research Report CCRR-0185 Page 7 of 12 Figure 5 PVC Thermoformed Spindle Figure 6 H 6005-T5 Aluminum Insert Figure 7 Heavy U 6005-T5 Aluminum Insert Figure 8 Modified H 6005-T5 Aluminum Inserts

8 Code Compliance Research Report CCRR-0185 Page 8 of 12 Top Rail Bracket Bottom Rail Bracket Figure 9 Classic Rail Bracket Kit

9 Code Compliance Research Report CCRR-0185 Page 9 of 12 Top Rail Bracket Bottom Rail Bracket Figure 10 Standard Horizontal Rail Bracket Kit

10 Code Compliance Research Report CCRR-0185 Page 10 of 12 Top Rail Bracket Bottom Rail Bracket Figure 11 Standard Vertical Rail Bracket Kit

11 Code Compliance Research Report CCRR-0185 Page 11 of 12 Figure 12 Backplate Straight-Stair Bracket (Top & Bottom Rail Bracket) Figure 13 Commercial Rail Bracket Kit (Top & Bottom Rail Bracket) Top Rail Bracket Bottom Rail Bracket Figure 14 "T" Stair Rail Bracket Kit

12 Code Compliance Research Report CCRR-0185 Page 12 of 12 Top Rail Bracket Bottom Rail Bracket Figure 15 Classic Stair Rail Bracket Kit Figure 16 Stair Rail Bracket Kit (Top & Bottom Rail Bracket)