PARCHEM CONSTRUCTION SUPPLIES FLOORING CATALOGUE THE LEADING CHOICE FOR THE FLOORING CONTRACTOR

Size: px
Start display at page:

Download "PARCHEM CONSTRUCTION SUPPLIES FLOORING CATALOGUE THE LEADING CHOICE FOR THE FLOORING CONTRACTOR"

Transcription

1 PARCHEM CONSTRUCTION SUPPLIES FLOORING CATALOGUE THE LEADING CHOICE FOR THE FLOORING CONTRACTOR

2 Please recycle Copyright 2013 Parchem Construction Supplies Pty Limited This publication is copyright. All rights are reserved. Reproduction in whole or in part is prohibited without written permission. Application details are provided as a suggestion only of intended use. This catalogue is produced as a guide to the product range. Some items may not be available at all outlets. Owing to a continual product improvement, designs & specifications may be subject to change without notice. 2 I Parchem Construction Supplies Pty Ltd ABN

3 INDEX Manufacturer and distributor of industry leading brands The complete range of products and solutions for the flooring contractor... CONTENTS Concrete Floor Repair 4 Curing Compounds 5 Preparation 5 Surface Scarifiers 6-9 Cup Wheels 10 Drilling Equipment 11 Concrete Grinders Grinding Shoes 14 Shot Blasters Dust Collectors 17 Power Hammer Tools Liquid Hardeners 21 Primers 21 Integral Hardeners 21 Exposed Aggregate Finish 21 Cementitious & Resin Underlays Floor Toppings Coatings Decorative Floor Toppings Concrete Sealers Tools & Equipment stencil Flooring Contractors I 3

4 concrete floor repair Concrete Floor Repair Patchroc C Floor / pavement patch repair, fast set mortar ( mm depth). For the emergency reinstatement of localised deep patches in concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors. Supply (kg) Patchroc GP Floor / pavement patch repair, fast set mortar (15-75 mm depth). For the emergency reinstatement of localised patches in concrete pavements, airport aprons, access ramps, roadways and many industrial situations such as gangways and warehouse floors. Supply (kg) Paveroc Floor / pavement large area, repair mortar (15-50 mm depth). Paveroc is used for the reinstatement of large areas of concrete pavements and floors to avoid the total replacement of bays. Supply (kg) Nitofill LV Low viscosity, dual cartridge, epoxy crack-injection system. Nitofill LV is designed for injecting cracks in concrete and masonry where there is a need to consolidate a structure or exclude water and air from contact with the reinforcement NITOFILL LV 1.5L PACK NITOFILL LV 15L BASE PACK NITOFILL LV HARDENER 15L PACK Conbextra EP10 A highly fluid epoxy grout for dynamic/repetitive load applications gap width between mm. Conbextra EP10 is a low viscocity epoxy grout for situations where heavy dynamic or mobile loads are encountered. Emer-Seal PU25 High performance, flexible, one-component, polyurethane joint sealant. Emer-Seal PU25 is used for Sealing joints in concrete panels, fibrous cement products, external cladding panels, blockwork and brickwork. Also in sealing joints around aluminium and timber door and window frames and between metal EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN) EMER-SEAL PU 25 WHITE 600ML (20/CTN) EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN) EMER-SEAL PU 25 BLACK 600ML (20/CTN) EMER-SEAL PU 25 BRICK RED 600ML (20/CTN) EMER-SEAL PU 25 BEIGE 600ML (20/CTN) EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN) Emer-Seal PU40 Tough, abrasion resistant, one-component, polyurethane joint sealant, trafficable. For bonding or sealing joints between most construction materials, where a high bond strength is required EMER-SEAL PU 40 CONC.GREY 600ML (20/CTN) EMER-SEAL PU 40 BLACK 600ML (20/CTN) EMER-SEAL PU 40 CONCRETE GREY 200L Roadseal SL Very low modulus, self-smoothing, one component silicone joint sealant. Sealing sawn joints in: Asphalt roads & pavements. Slot sealing of cable installations in asphalt and concrete pavements. Abutment joints between concrete and asphalt pavements EMER-SEAL ROADSEAL SL CHAR.GREY 600ML EMER-SEAL ROADSEAL SL CHARCOAL GREY 20L EMER-SEAL ROADSEAL SL CHARCOAL GREY 200L Caulking Guns SEALANT GUN LONG BARREL (SAUSAGE) ARW055 DW-DC547-KIT CAULKING GUN 380MM CAULKING GUN DEWALT CORDLESS (KIT) Supply ML PAK L PAK 4 I Parchem Construction Supplies Pty Ltd ABN

5 floor surface preparation Emer-seal backing rod Economical, low density, open cell, polyurethane, sealant backing rod range. uses Time saving its flexibility, elasticity and round shape allows quick, efficient placement into both even and uneven joints. It can be stretched, squeezed or bent to conform to irregular surfaces. One size of diameter foam can be used in a range of joint sizes. Optimal sealant curing open cell construction allows air to reach both sides of the sealant, ensuring uniform curing EMER-SEAL BACKING ROD 16MM X 150M ROLL EMER-SEAL BACKING ROD 22MMX100M ROLL EMER-SEAL BACKING ROD 29MMX60M ROLL EMER-SEAL BACKING ROD 38MMX30M ROLL EMER-SEAL BACKING ROD 50MMX20M ROLL Curing Compounds Concure A99 Water based acrylic curing compound - conforms to AS3799. Concure A99 is recommended for applications to the surfaces of freshly laid concrete, including renders, structural and mass concrete indoors and outdoors and particularly in situations where other conventional means of wet curing are difficult to maintain Expandafoam Backing rod Medium density, closed cell polyethylene backing rod range. uses Expandafoam is a closed cell polyethylene foam rod supplied in circular section cords of varying diameters. Expandafoam is primarily used in expansion joints but is also suitable for use in any joint system requiring a readily compressible joint filler containing no migratory chemicals which could adversely affect joint sealants EXPANDAFOAM ROD 6MMX250M ROLL EXPANDAFOAM ROD 10MMX250M ROLL EXPANDAFOAM ROD 13MMX100M ROLL EXPANDAFOAM ROD 15MMX100M ROLL EXPANDAFOAM ROD 20MMX60M ROLL EXPANDAFOAM ROD 25MMX50M ROLL EXPANDAFOAM ROD 30MMX50M ROLL EXPANDAFOAM ROD 40MMX2M STRIP EXPANDAFOAM ROD 50MMX2M STRIP EMER-SEAL CONstruction SILICONE HM Tough, pick and abrasion resistant, one-component silicone sealant / adhesive for civil and industrial applications. For bonding or sealing joints between most construction materials, where a high bond strength is required EMER-SEAL CON SILICONE HM CON.GREY 600ML Concure X90 Water based resin curing compound - conforms to AS3799. Designed to degrade with UV exposure. Concure X90 is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors Concure AV Evaporative retarders for plastic concrete to reduce shrinkage cracks. Concure AV is recommended for spray applications onto the fresh surface of plastic concrete to greatly reduce cracking caused by unfavourable weather conditions Preparation Hydrochloric Acid AC AC Flooring Contractors I 5

6 surface scarifiers SURFACE SCARIFIERS Features Versatility - Surface grinder/scarifier with a cutting width of 200 mm (8 ), ideal for concrete or asphalt surfaces. A variety of multipurpose, interchangeable tools makes surface cleaning easy, virtually eliminating down time for changing tools. Handling - The machine combines lightweight with compact size & high performance. Economical - The machine gives unsurpassed value & return on your investment in time & equipment. Adjustable - The fine pitch tool height adjustment makes the machine responsive to your needs & extends tool life. Expandable - An optional edger cage can be fitted allowing you to work within 12 mm from any wall or protrusion. A dust control outlet is fitted to allow use with an optional dust extractor. SP-8H SP-8E * Petrol SPS units come with a factory installed Cyclopac air filtration system. MODEL PETROL ELECTRIC Model SP-8 SP-8 SP-8E Part No. BR-SP8R BR-SP8H BR-SP8H Path 200 mm (8 ) 200 mm (8 ) 200 mm (8 ) Engine Robin 6.0 hp Honda 5.5 hp 240V 1.5kW, 8.7amp Weight 61 kg 61 kg 68 kg CUTTER CAGES SURFACE SCARIFIER ACCESSORIES A Type Cage B Type Cage Part Code BR-R139 DESCRIPTION Assembly Milling of misangled footpath, scrabbling of concrete surfaces and milling concrete joints. Part Code DESCRIPTION BR Flail Cage Assembly - A Type BR Friction Cage Assembly - B Type BR Cutter Shaft BR Ring Spacer BR Hardened Washer BR Tension Spring BR Shackles BR B-1 Cutter BR B-2 Cutter BR B-2 Cutter BR A-1 Cutter BR A-2 Cutter BR A-3 Cutter BR Tungsten Carbide Tipped Cutter 6 I Parchem Construction Supplies Pty Ltd ABN

7 SUrface scarifiers MULTI BLADE MACHINE FEATURES Dust free if connected to a convenient Blastrac dust collector. Possibility to remove 3mm of concrete at a time (depending on type of concrete), which saves a lot of time. Because this machine does not hit the floor, it is a perfect way to remove hard top layers from soft floors. Sawing pattern is very fine, because of the many blades on one drum. New: drive system equipped with a pedal. Machine can drive on power without a working drum. Reduced the use of expensive diamond tools. Complete sealed drum housing for reducing substance. By using more spacers and fewer blades the sawing pattern can be changed. Combination machine, which is easy to change from sawing machine into scarifying machine. Comfortable to use, easy to move, low vibrations. Several optional tools for each different application. Drum of Diamond Blades - used by BMC-335EHY Part Code DESCRIPTION E06320 DIAMOND BLADE 250 GREEN 30 / 40 E06079 SPACER RING 2.5MM MODEL BMC-335EHY Working width Scarifying capacity Motor power Working speed Weight Dimensions L / W / H Drive system / speed Push / Pull machine Surface Ø 335mm Up to 80 m²/h on concrete 12.1kW / 400V - 50Hz / 32A Three phase 13.9kW / 400V - 60Hz / 32A Three phase 3000 rpm 405 kg 1400 mm / 605 mm / 1075 mm Hydraulic / 1-15 m/min Push Concrete / Stone / Asphalt Flooring Contractors I 7

8 surface scarifiers su BLASTRAC SCARIFIERS Features Closed circuit which is almost dust free, when connected to an appropriate Blastrac dust collector. Heavy weight for increased scarifying performances. New braking system with handle. During scarifying, the machine slows down itself. Brake force is easily changed with handle on steer. Extra heavy drum, for more down force. Adjustable braking device, lateral drum loading. Micrometric and memorized adjustment of the working depth; No underground deterioration and more precision. User friendly design, comfortable to use with low vibrations, easy to manoeuvre. Several optional cutting tools for each different application. MODEL BMP-265B BMP-265E Ø 265 mm Ø 265 mm Up to 120m²/h on concrete Up to 120 m²/h on concrete 8,2 kw / Petrol 5,5 kw / 400 V - 50 Hz / 16A Three phase 1500 rpm 1500 rpm 175 kg 175 kg Dimensions L / W / H 1260 mm / 500 mm / 1160 mm 1260 mm / 500 mm / 1160 mm Drive system / speed Manual / N/A Manual / N/A Push / Pull machine Push Push Concrete / Stone / Asphalt Concrete / Stone / Asphalt Working width Scarifying capacity Motor power Working speed Weight Surface scarifying cutters to suit bmp-265 Full tungsten carbide milling cutter. Hard metal milling cutter with tungsten Specially designed for removing coatings, carbide plates. epoxies, glue residues, egaline, road Specially designed for removing coatings, markings and thermoplastics. epoxies, glue residues, egaline, road markings and thermoplastics. Hard metal cutter with tungsten carbide tips. Specially designed for removing concrete, asphalt, stone or other hard materials. Article Code MPL60-1 MPL75 MPL272 Milling cutter 12pt. - Ø22xØ55x20 Milling cutter 6pt. - Ø19xØ55x20 Cutter 8pt. - Ø20xØ56x6 / 8,3 TC 8 I Parchem Construction Supplies Pty Ltd ABN

9 s surface scarifiers BLASTRAC SCARIFIERS Features Closed circuit which is almost dust free, when connected to an appropriate Blastrac dust collector. Heavy weight for increased scarifying performances. New drive system equipped with a pedal. Machine can drive on power without a working drum. When motor is on, machine is moving forward automatically, no need to push it. Adjustable braking device, lateral drum loading. Micrometric and memorized adjustment of the working depth: no underground deterioration. Variable speed, forward & backward motion. User friendly design, comfortable to use with low vibrations, easy to manoeuvre. Several optional cutting tools for each different application. MODEL BMP-335EHY BMP-335GHY Ø 335mm Ø 335mm Up to 175 m²/h on concrete Up to 175 m²/h on concrete 12,1kW / 400V - 50Hz / 32A Three phase 7,5kW diesel 1000 rpm 1000 rpm 405 kg 405 kg Dimensions L / W / H 1400 mm / 605 mm / 1075 mm 1400 mm / 605 mm / 1075 mm Drive system / speed Hydraulic / 1-15 m/min Hydraulic / 1-15 m/min Push / Pull machine Push Push Concrete / Stone / Asphalt Concrete / Stone / Asphalt Working width Scarifying capacity Motor power Working speed Weight Surface scarifying cutters to suit bmp-335 Hard metal cutter with Hard metal milling cutter with Full tungsten carbide milling Hard metal cutter with tungsten tungsten carbide tips. tungsten carbide ends. cutter. carbide tips. Specially designed for Specially designed for Specially designed for Due to the 12 cutting points the removing concrete, asphalt, removing coatings, epoxies, removing coatings, epoxies, threaded surface is more equal. stone or other hard materials. glue residues, egaline, road glue residues, egaline, road Specially designed for removing markings and thermoplastics. markings and thermoplastics. concrete, asphalt, stone or other hard materials. Article Code MPL24 MPL29 MPL60-1 MPL120 Cutter 8pt. - Ø30xØ80x8 / 8.3 TC Milling cutter 6pt. - Ø30xØ80x20 Milling cutter 12pt. - Ø22xØ55x20 Cutter 12pt. - Ø30xØ77x8 / 8.3 TC Flooring Contractors I 9

10 cup wheels SINGLE ROW Single row diamond cup wheel suitable for grinding a wide range of construction materials at an economical cost. Materials include concrete, bricks, concrete pavers stone, concrete blocks etc. Should be used dry on electric power tools. Part Code Specification ARBOR SGP-1-100T CUP100SRE- TRADE SGP-1-125T CUP125SRE- TRADE SGP-1-180T CUP180SRE- TRADE SPIRAL SEG Spiral diamond cup wheels available with 9, 12 and 24 segments for aggressive grinding to more controlled type application where extended life is desired. Should be used dry on power tools or wet/dry if used on a walk behind floor grinder. Suitable for grinding concrete, bricks, concrete pavers, stone, concrete blocks etc. Part Code Specification ARBOR TSGP /16 CUP SPIRAL-100S9 TSGP CUP SPIRAL-125S9 TSGP CUP SPIRAL-180S12 TSGP CUP SPIRAL-180S24 TURBO Turbo diamond cup wheel with a coarse grit diamond designed for rapid removal of a wide range of construction materials with exceptional life. Materials include concrete, bricks, concrete pavers, stone, concrete blocks etc. Should be used dry on electric power tools. Part Code Specification ARBOR GJB100-GCA2-C /16 CUP TURBO 100C GJB100-GCA2-M /16 CUP TURBO 100M GJB100-GCA2-F /16 CUP TURBO 100F 5 - SEGMENT 5 - segment diamond cup wheel at an economical cost designed for aggressive grinding of wide range of construction materials such as concrete, bricks, concrete pavers, stone, concrete blocks etc. Also suitable for some epoxy removal. Should be used dry on power tools or wet/dry if used on a walk behind floor grinder. Part Code Specification ARBOR TSGP180-S CUP SP-SUPA 180S5 TURBO Turbo diamond cup wheel with a medium grit diamond designed for removal of a wide range of construction materials without deep scratching and giving exceptional life. Materials include concrete, bricks, concrete pavers, stone, concrete blocks etc. Should be used dry on electric power tools. R-SHAPE SEGMENT New design R segment designed for rapid removal of concrete and hard painted coatings which have been applied to concrete Should be used dry on power tools or wet/ dry if used on a walk behind floor grinder. Part Code Specification ARBOR TSGR CUP125RC R-SEGMENT TSGR CUP180RC R-SEGMENT Part Code Specification ARBOR GJB125-GCA2-C CUP TURBO 125C GJB125-GCA2-M CUP TURBO 125M GJB125-GCA2-F CUP TURBO 125F TURBO Turbo diamond cup wheel with a fine grit diamond designed for fine grinding or removing scratches and finishing off on a wide range of construction materials and giving exceptional life. Materials include concrete, bricks, concrete pavers, stone, concrete blocks etc. Should be used dry on electric power tools. Part Code Specification ARBOR GJB180-GCA2-C CUP TURBO 180C GJB180-GCA2-M CUP TURBO 180M GJB180-GCA2-F CUP TURBO 180F PCD Poly Crystalline diamond cup wheels specifically designed for removal of glues and epoxies which are excessively built up on concrete surfaces. Softer type chewy materials are no match for this aggressive cup wheel. Should be used dry on power tools or wet/dry if used on a walk behind floor grinder. Part Code Specification ARBOR DRCW125-PCD CUP PCD 125MM (12 TIP) DRCW175-PCD CUP PCD 175MM (6 TIP) DRCW175-PCD CUP PCD 175MM (12 TIP) DRCW175-PCD CUP PCD 175MM (24 TIP) 10 I Parchem Construction Supplies Pty Ltd ABN

11 Drilling equipment SHROUDS FOR ANGLE GRINDERS mm wide tuck point Premium quality 6.5mm wide blade used for tuck pointing and cleaning of mortar joints. Most commonly used by the professional in dry application. Part Code Specification HFTK105P (85) BLADETEC-TU105/65 PREMIUM HFTK115P (95) BLADETEC-TU115/65 PREMIUM HFTK125P (105) BLADETEC-TU125/65 PREMIUM HFTK180P (158) BLADETEC-TU180/65 PREMIUM E06227 Part Code Specification ARBOR E06227 POLYURETHANE UNIVERSAL 5" FULL SHROUD POLYURETHANE UNIVERSAL 7" CONVERTIBLE ECO SHROUD FIXING NUTS - CUP WHEELS 9.5mm wide tuck point Premium quality 9.5mm wide blade used for tuck pointing and cleaning of mortar joints. Most commonly used by the professional in dry application. Part Code Specification HFTK105P (85) BLADETEC-TU105/95 PREMIUM HFTK115P (95) BLADETEC-TU115/95 PREMIUM HFTK125P (105) BLADETEC-TU125/95 PREMIUM HFTK180P (158) BLADETEC-TU180/95 PREMIUM Part Code Specification FX ARBOR NUT ARBOR NUT (9 GRINDER) FX ARBOR NUT ARBOR NUT (5 GRINDER) FX M14 THREAD BLADE NUT V-Segment Crack Chaser Wheels Premium quality crack chasing blade with a V type segment designed to follow and widen cracks in concrete prior to repair. Most commonly used by the professional in dry application. Specification HFSTK105P 100x12x9.5x30x7x5.5 (76) BLADETEC CRACK CHASER 105MM HFSTK125P 125x12x9.5x32x9x4.0 (101) BLADETEC CRACK CHASER 125MM HFSTK180P 178x12x9.5x34x13x4.0 (154) BLADETEC CRACK CHASER 180MM Flooring Contractors I 11

12 grinders FLEXTOOL CUB GRINDER BLASTRAC BG-250G13 MODEL FLEXTOOL CUB GRINDER MODEL BG-250G13 Working width Ø250 mm Working width Ø250 mm Motor 2.2 kw / 230V Motor 7.6 kw (10.2hp) Petrol Honda Working speed 1450 rpm Working speed 2000 rpm Weight 46 kg Weight 142 kg / 50 kg disc pressure Dimensions L / W / H 1301 mm / 458 mm / 1106 mm Drive system / speed Manual / N/A Push / Pull machine Push Surface Concrete / Stone / Asphalt Part Code Specification CUB-EZPLATE-250 CUB EZ CHANGE PLATE QFSHOE-HC QUICK FIT SHOE 16GR WHITE QFSHOE-MC QUICK FIT SHOE 16GR GREY QFSHOE-HC QUICK FIT SHOE 20GR WHITE QFSHOE-MC QUICK FIT SHOE 20GR GREY QFSHOE-ABE QUICK FIT SHOE 20GR BLACK EXTREME QFSHOE-HC QUICK FIT SHOE 30/40GR WHITE QFSHOE-MC QUICK FIT SHOE 30/40GR GREY QFSHOE-AB QUICK FIT SHOE 30/40GR BLACK QFSHOE-ABE QUICK FIT SHOE 30/40GR BLACK EXTREME QFSHOE-MC QUICK FIT SHOE 50/60GR GREY QFSHOE-HC QUICK FIT SHOE 80GR WHITE QFSHOE-MC QUICK FIT SHOE 80GR GREY QFSHOE-SHC QUICK FIT SHOE 100GR WHITE EXTREME QFSHOE-HC QUICK FIT SHOE 100GR WHITE QFSHOE-MC QUICK FIT SHOE 100GR GREY QFSHOE-ABE QUICK FIT SHOE 100GR BLACK QFSHOE-MC QUICK FIT SHOE 150GR GREY QFSHOE-MC QUICK FIT SHOE 300GR GREY QFCUB-PCD QUICK FIT SHOE PCD -GLUE & RESIN Part Code Specification CRM-1005THC GRINDING PLATE 10" WHITE 30/40GR (5-SEG) CRM-1005TMC GRINDING PLATE 10" GREY 30/40GR (5-SEG) CRM-1005TABE GRINDING PLATE 10" BLACK 30/40GR (5-SEG) CRM-1005TG GRINDING PLATE 10" WHITE 20GR (5-SEG) CRM-1010THC GRINDING PLATE 10" WHITE 30/40GR (10-SEG) CRM-1010TMC GRINDING PLATE 10" GREY 30/40GR (10-SEG) CRM-1010TAB GRINDING PLATE 10" BLACK 30/40GR (10-SEG) CRM-1010G GRINDING PLATE 10" WHITE 20GR (10-SEG) CRM-1020THC GRINDING PLATE 10" WHITE 30/40GR (20-SEG) CRM-1020SHC GRINDING PLATE 10" WHITE(S) 30/40GR (20-SEG) CRM-1020TMC GRINDING PLATE 10" GREY 30/40GR (20-SEG) CRM-1020TAB GRINDING PLATE 10" BLACK 30/40GR (20-SEG) CRM-1020TFF GRINDING PLATE 10" WHITE 30/40GR (20-SEG) 12 I Parchem Construction Supplies Pty Ltd ABN

13 grinders Blastrac grinders Features Closed circuit which is almost dust free, when connected to an appropriate Blastrac dust collector. 3 planetary rotating discs Ø 155 mm or Ø 185 mm or Ø 240 mm. Separate drive system for central rotation and 3-disc planetary distribution. User friendly and comfortable to use with low vibration. No risk of underground deterioration. Can work even in places with high hygiene and safety standards (food, pharmaceutical, medical industries). Perfect for decorative floor applications. Convenient for dry and wet applications, indoor, outdoor. Floating shroud with brush for every application. Many optional tools, which are easy to change because of the patented DIAMAG system. BMG-435WD BMG-735PRO BMG-580PRO BMG-780PRO MODEL BMG-435WD BMG-580PRO MODEL BMG-735PRO BMG-780PRO Motor 2,2 kw / 230V - 50Hz / 16A - Single phase 3.0 kw / 400V - 50Hz / 16A - Three phase 2,2 kw / 110V 50Hz / 32A Single phase 7,5 kw / 400V - 50Hz / 16A Three phase Working speed 750 rpm rpm Weight 115 kg 285 kg Dimensions L / W / H 1100 mm / 460 mm / 1350 mm 1990 mm / 595 mm / 1140 mm Drive system / speed Manual / N/A Manual / N/A Push / Pull machine Push Push Application Concrete / Stone / Marble / Asphalt Concrete / Stone / Marble / Asphalt Working width Ø700 mm Ø750 mm Motor 11 kw / 400V - 50Hz / 22,5A Three phase 15 kw / 400V - 50Hz / 29,5A Three phase Working speed rpm rpm Weight 335 kg 436kg Dimensions L / W / H 1980 mm / 735 mm / 1180 mm 2110 mm / 780 mm / 1250 mm Drive system / speed Manual / N/A Manual / N/A Push / Pull machine Push Push Application Concrete / Stone / Marble / Asphalt Concrete / Stone / Marble / Asphalt Flooring Contractors I 13

14 grinding SHOES UNIVERSAL SHOE TO SUIT BMG-435 & ALL DIAMAG ADAPTER PLATES Screw type 2-segment diamond shoes to suit the Blastrac BMG-435 Planetary Grinder available in three bonds to cover all types of concrete grinding applications. Whether it be very hard concrete or the other end of the scale with soft abrasive concrete, shoes are available from 16 grit through to 300 grit. Poly Crystalline Diamond (PCD) shoes also available for removal of glues and expoxies which are excessively built up on concrete surfaces. Softer type chewy materials are no match for these PCD shoes. Available bond types: Soft, Medium, Hard. Can be used wet or dry. easy lock grinding shoes - 1 segment Part Code Specification RLSHOE-HC16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE HC16 RLSHOE-HC40/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE HC40 RLSHOE-HC80/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE HC80 RLSHOE-MC16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE MC16 RLSHOE-MC40/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE MC40 RLSHOE-MC80/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE MC80 RLSHOE-AB16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE AB16 RLSHOE-AB40/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE AB40 RLSHOE-AB80/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE AB80 2 Segment Grinding Shoes 1 Segment Grinding Shoes PCD Grinding Shoe easy lock grinding shoes - 2 segments 1 segment Part Code Specification BLSHOE-HC20-1S BMG GRINDING SHOE WHITE 1-SEG 16GRIT BLSHOE-HC40-1S BMG GRINDING SHOE WHITE 1-SEG 40GRIT 2 segment Part Code Specification BLSHOE-HC BMG GRINDING SHOE 16GR WHITE BLSHOE-MC BMG GRINDING SHOE 16GR GREY BLSHOE-HC BMG GRINDING SHOE 20GR WHITE BLSHOE-MC BMG GRINDING SHOE 20GR GREY BLSHOE-ABE BMG GRINDING SHOE 20GR BLACK EXTREME BLSHOE-HC BMG GRINDING SHOE 30/40GR WHITE BLSHOE-MC BMG GRINDING SHOE 30/40GR GREY BLSHOE-AB BMG GRINDING SHOE 30/40GR BLACK BLSHOE-ABE BMG GRINDING SHOE 30/40GR BLACK EXTREME BLSHOE-MC BMG GRINDING SHOE 50/60GR GREY BLSHOE-HC BMG GRINDING SHOE 80GR WHITE BLSHOE-MC BMG GRINDING SHOE 80GR GREY BLSHOE-SHC BMG GRINDING SHOE 100GR WHITE EXTREME BLSHOE-HC BMG GRINDING SHOE 100GR WHITE BLSHOE-MC BMG GRINDING SHOE 100GR GREY BLSHOE-ABE BMG GRINDING SHOE 100GR BLACK BLSHOE-MC BMG GRINDING SHOE 150GR GREY BLSHOE-MC BMG GRINDING SHOE 300GR GREY BLSHOE-PCD BMG GRINDING SHOE PCD Part Code Specification RLSHOE-VHC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE VHC16 RLSHOE-VHC40 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE VHC40 RLSHOE-VHC80 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE VHC80 RLSHOE-HC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE HC16 RLSHOE-HC40 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE HC40 RLSHOE-HC80 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE HC80 RLSHOE-HC120 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE HC120 RLSHOE-MC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE MC16 RLSHOE-MC40 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE MC40 RLSHOE-MC80 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE MC80 RLSHOE-MC120 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOEM120 RLSHOE-AB16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE AB16 RLSHOE-AB40 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE AB40 RLSHOE-AB80 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE AB80 RLSHOE-AB120 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE AB120 diamag adapter plates Model E07155 E07185 E07230/6 E07240 E07270 DIAMAG ADAPTER PLATE SUIT BMG-435 DIAMAG 185 ADAPTER PLATE SUIT BMG -580 DIAMAG ADAPTER PL SUIT HTC500/650S/E&HDX DIAMAG 240 ADAPTER PLATE SUIT BMG-735/780 DIAMAG ADAPTER PL SUIT HTC800/800HDX 14 I Parchem Construction Supplies Pty Ltd ABN

15 SHOT BLASTERS polishing resins Part Code Specification BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 50GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 100GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 200GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 400GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 800GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 1500GRIT BG DIAMAG MAGNETIC DIAMG RESIN WET BOND 3000GRIT BLASTRAC 1-8DPS30 Features Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. Universal unit: can be connected to a standard electrical plug (230 V). First model of the range with an electric drive system. Ergonomic design and user friendly control panel. Heavy duty professional equipment available either in 230 V (easy to plug in on every job site) or 400V. Reliable machine, suitable for rental. The smallest operator walk-behind shot blaster. Easy to transport, handle and use. Can be used for floor preparation / renovation / maintenance and decorative purposes. BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 100 BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 200 BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 400 BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 800 BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 1500 BG DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 3000 BLASTRAC 1-5HH Features Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. Universal unit: can be connected to a standard electrical plug (230V). Small and compact, but still very efficient. Can work on very small or hardly accessible areas for example edges. Easy to transport, handle and use. Reliable machine, suitable for rental. Can be used for floor and wall preparation / renovation / maintenance and decorative purposes. BLASTRAC 1-10DS/GLOBAL Features Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. Highly versatile machine, appropriate for many job site sizes. High quality and strong fabrication. Reliable machine provided with latest technology. Ergonomic design and user friendly control panel. Easy to transport, handle and use. Can be used for floor preparation / renovation / maintenance and decorative purposes. MODEL 1-5HH MODEL 1-8DPS DS/GLOBAL Working width Blasting capacity Motor: Working speed Weight Dimensions L / W / H Drive system / speed Push / Pull machine Abrasive consumption Surface 125mm Up to 12m²/h on concrete 1,4kW / 230V - 50Hz / 16A - Single phase 1,4kW / 110V - 5oHz / 16A - Single phase 0,2 1,3 m/min 9.5 kg 480mm / 195mm / 350mm Manual / N/A Push N/A Steel / Concrete / Stone / Asphalt Working width 203 mm 254 mm Blasting capacity up to 50 m²/h on concrete up to 200 m²/h on concrete Motor 3,0 kw / 230V - 50Hz or 60Hz / 16A - Single phase 3,0 kw / 400V - 50Hz or 60Hz / 16A - Three phase 5 pole 11 kw / 400V - 50Hz or 60Hz / 32A - Three phase 5 pole Weight 125 kg 325 kg Dimensions L / W / H 1310 mm / 400 mm / 1200 mm 1880 mm / 400 mm / 1060 mm Drive system / speed Electric / 0 23 m/min Electric / m/min Push / Pull machine Push Pull Abrasive consumption gr/m² gr/m² Surface Steel / Concrete / Stone / Asphalt Steel / Concrete / Stone / Asphalt Flooring Contractors I 15

16 SHOT BLASTERS BLASTRAC 1-15DS/GLOBAL Features Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. Highly versatile machine, appropriate for medium to big job site sizes. High quality and strong fabrication. Height adjusting system for easy transport. Ergonomic design and user friendly control panel. Reliable machine due to proven concept. Easy handle and use. Can be used for floor preparation / renovation / maintenance and decorative purposes. DUST COLLECTORS MODEL BDC-1216 BLASTRAC 2-20DT Features Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. Highly versatile machine, appropriate for medium to big job site sizes. Very good performing and separation system. Powerful machine equipped with 2 twin motors 11 kw. Ergonomic design and user friendly control panel. Height adjusting system for easy transport. Very efficient on all types of floors. High performances and still fit to a standard door entrance. Increased productivity, reduced maintenance costs. Easy handle and use. Can be used for floor preparation / renovation / maintenance and decorative purposes. Dimensions W / L / H Weight Motor power Dust extraction motors Filter Cleaning Dustbin capacity Dust hose inlet Suitable machines ACCESSORIES CF CF CF CF CF x 570 x mm 40 kg 1,6kW / 230 V / 50Hz & 60Hz / 16A 2 independent motors M-class star filter Manual shaker on top 40 litres Ø 51 mm Handheld / small grinders, shot blasters and scarifiers. DESCRIPTION Hose fitting 70mm. Reducer mm Mobile nozzle 400 mm D50 Chromed handgrip D=50mm Mobile nozzle 500mm D50 MODEL 1-15DS/GLOBAL 2-20DT MODEL BDC-454 Working width 380 mm 550 mm Blasting capacity up to 250 m²/h on concrete up to 450 m²/h on concrete Motor 15 kw / 400V - 50Hz or 60Hz / 63A - Three phase 5 pole 2 x 11 kw / 400V - 50Hz or 60Hz / 63A - Three phase 5 pole Weight 450 kg 575 kg Dimensions L / W / H 1880 mm / 570 mm / 1200 mm 1950 mm / 720 mm / 1400 mm Drive system / speed Electric / m/min Electric / m/min Push / Pull machine Pull Pull Abrasive consumption gr/m² gr/m² Surface Steel / Concrete / Stone / Asphalt Steel / Concrete / Stone / Asphalt Dimensions W / L / H Weight Motor power Optional motor power Dust extraction motors Filter Airflow Cleaning Dust hose inlet Bag capacity Optional Big Bag system Optional dustbin 665 x 1344 x 1428 mm 267 kg 5,5kW / 400 V / 50Hz / 32A 5,5kW / 440 V / 60Hz / 32A 1 powerful motor 4 high quality cartridge filters l/min Automatic pulse cleaning system Ø 76mm / Ø 102mm / Ø 127mm 25kg 67,5kg 100 liters 16 I Parchem Construction Supplies Pty Ltd ABN

17 DUST COLLECTORS MODEL BDC-1330LPP BDC-3140LPP MODEL BDC-654 BDC-655 Dimensions W / L / H 600 x 980 x mm 600 x x mm Weight 127 kg 200 kg Motor power 4,5kW / 230 V / 50Hz / 16A 4kW / 400 V / 50Hz / 16A Optional motor power 4,5kW / 230 V / 60Hz / 16A 4kW / 440 V / 60Hz / 16A Dust extraction motors 3 independent motors 1 powerful motor Airflow 7500 l/min 3 cartridge filters Filter 3 cartridge filters 7500 l/min Cleaning Automatic pulse cleaning system Automatic pulse cleaning system Dust hose inlet Ø 51 mm / Ø 76 mm Ø 51mm / Ø 76mm Bag capacity 25 kg 25kg Optional dustbin 100 litres 100 liters Dimensions W / L / H / mm 800 x x mm Weight 365kg 650kg Motor power Optional motor power 4,0kW / 400 V / 50Hz / 32A & 63A 4,0kW / 440 V / 60Hz / 32A & 63A 5,5kW / 400 V / 50Hz / 32A & 63A 5,5kW / 440 V / 60Hz / 32A & 63A Dust extraction motors 1 powerful motor 1 powerful motor Filter 6 high quality cartridge filters 6 high quality cartridge filters Airflow l/min l/min Cleaning Dust hose inlet Automatic pulse cleaning system Ø 51mm / Ø 127mm / Ø 152mm Automatic pulse cleaning system Ø 127mm or Ø 152mm Dustbin Capacity 87,5 litres 100 liters filters for blastrac DUST COLLECTORs DUST COLLECTOR accessories MODEL description Hose fitting STAR FILTER FOR BDC STAR FILTER FOR BDC CARTIRDGE FILTER FOR BDC-654/317P/1330LPP/3140P/3140LPP E10218 CARTIRDGE FILTER FOR BDC-454/655 Reducer Nozzle Handgrip ACCESSORIES DESCRIPTION CF CF CF CF CF Hose fitting 70mm. Reducer mm Chromed handgrip D=50mm Mobile nozzle 400 mm D50 Mobile nozzle 500mm D50 Flooring Contractors I 17

18 power hammer tools cordless rotary hammer drill HT-DH36DAL 36V Rotary Hammer HT-DH18DL(HL) 18V Rotary Hammer Model Tool Code Battery Type Speed No Load (rpm) Impact Rate (bpm) Weight (kg) HD18DL(HL) SDS Plus Cassette , DH36DAL SDS Plus Slide , rotary hammer drill HT-DH40MR 40 mm Hammer Drill SDS max HT-DH40MRY 40 mm Rotary Hammer Drill HT-DH50MRY 50 mm Rotary Hammer Drill Model Tool Code Watts Input Blow Energy (joules) Speed No Load (rpm) Impact Rate (bpm) Weight (kg) DH40MR SDS Max ,320-2, DH40MRY SDS Max ,320-2, DH50MRY SDS Max 1, ,050-2, demolition hammer HT-H45MRY(H1) Demolition Non-Rotary Hammer HT-65SB2 Demolition Non-Rotary Hammer HT-H90SB Demolition Non-Rotary Hammer Model Tool Code Watts Input Blow Energy (joules) Impact Rate (bpm) Weight (kg) H45MRY (H1) SDS Max , H65SB2 30mm Hex 1, , H90SB 28mm Hex 1, additional power tools HT-DV18DL(HL) 18V Cordless Drill HT-G13SR3-BP 730W 5 Grinder HT-G18DL(H4) 18V Cordless Grinder 18 I Parchem Construction Supplies Pty Ltd ABN

19 power hammer tools Suitable for: Hitachi, Kango, Makita, Ryobi - 21mm Hex To Suit Medium Pneumatic - 22mm Hex Part No. Length mm Pack Qty Part No. Length mm Pack Qty SP-MP4X18 Moil Point K09962 Moil Point SP-NC4X18 Flat Chisel K09907 Flat Chisel To Suit Medium Pneumatic - 28mm Hex 50 K09913 Wide Scaling Chisel K09923 Clay Spade Part No. Length mm Pack Qty SP-MP2X18 Moil Point K09606 FCT Shank To suit floor cleaing tool SP-NC2X18 Flat Chisel SP-AC2W Asphalt Cutter SP-CS2 Clay Spade 500 Type of Working End Part No. Length mm Pack Qty Floor Scraper K08979 Complete with 2.0mm thick blade Blade K mm Blade for Floor Scraper Repair Kit to Floor Scraper K061040K 18pcs Repair Part for Floor Scraper. Contents: 2 - Rubber, 4 - Screw, 4 - Nut 8 - Spring Washer. 5 Flooring Contractors I 19

20 power hammer tools suitable for sds-max shank suitable for: Hitachi, Kango, Makita, Ryobi - 30mm Part No. Length mm Pack Qty Part No. Length mm Pack Qty BS Moil Point HT Moil Point BS Flat Chisel HT Flat Chisel BS9913 Wide Scaling Chisel HT Wide Scaling Chisel HT944967S Clay Spade BS S Clay Spade HT Asphalt Cutter º BS9923A BS9606 Asphalt Cutter FCT Shank To suit floor cleaning tool º HT9606 FCT Shank To suit floor cleaning tool suitable for sds - plus shank Part No. Length mm Pack Qty BS Moil Point BS Flat Chisel BS mm Wide Chisel I Parchem Construction Supplies Pty Ltd ABN

21 hardeners / PRIMERS & UNDERLAYS Liquid Hardeners Durafloor HD Liquid floor hardener / densifier / dustproofer - clear. On any new or existing internal concrete or masonry surface Durafloor HD-S Liquid floor hardener / densifier / stain resistant / sheen sealer - clear. On any new or existing internal concrete or masonry surface Primers Durafloor Level Prime High performance primer for Cemtop XD, Cemtop GP Advanced, Durafloor Leveltop, Durafloor Leveltop Rapid and Durafloor Levelbase. Concentrated high performance primer for cementitious underlays Nitoprime Zincrich Zinc-rich epoxy resin primer to protect steel reinforcement within repair mortar. Nitoprime Zincrich is the recommended anti-corrosion primer for exposed steel reinforcement for use with Renderoc concrete repair mortars Primer No.13 Used on porous surfaces with Emer-Seal 200, Emer-Seal PU40 and Emer-Seal CR. Integral Hardeners Nitoflor Sicaltop Floor hardener, silicon carbide / alumina additive - dry shake on. Nitoflor Sicaltop provides a non-rusting, extremely hard wearing, abrasion and slip resistant surface to new concrete floors. Supply (kg) Nitoflor Sicaltop Spreader BM-TV-830 SICALTOP COLOUR SPREADER Exposed Aggregate Finish Preco RWB Surface revealing liquid for exposed aggregate finish on fresh concrete. Preco RWB is used to reveal aggregate in freshly placed horizontal concrete by delaying the surface set so that the mortar paste may be brushed and washed from between the aggregate particles, after the mass of the concrete has set Cementitious & Resin Underlays Cemtop GP Advanced High performance floor underlay, self smoothing, levelling mortar for carpet / tiles (2-50 mm thickness) with enhanced flow properties for fast and easy application. Cemtop GP Advanced is designed as a heavy duty underlay which forms a smooth, hard surface for a variety of floor finishes including carpet and ceramic tiles. Supply (kg) Supply (ml) Primer No.21 Used on porous surfaces with Emer-Seal PU25 & Emer-Seal PU40 if required. Supply (ml) Durafloor Leveltop Floor underlay, self smoothing, levelling mortar for vinyl / carpet / timber (0-50 mm thickness). Durafloor Leveltop is designed as an internal high performance, easily installed underlay which forms a very smooth, hard surface for a variety of floor finishes including carpet, ceramic tiles, rubber, sheet vinyl and timber flooring. Supply (kg) Flooring Contractors I 21

22 UNDERLAYS & TOPPINGS Durafloor Leveltop Rapid Floor underlay, trowellable, rapid hardening, levelling mortar for carpet / tiles / vinyl (0-50 mm thickness). Durafloor Leveltop Rapid is designed as a heavy duty floor repair compound which provides a very smooth surface allowing the smooth installation of carpet, ceramic tiles sheet rubber, sheet vinyl and vinyl tiles. Durafloor Levelbase Floor underlay, economical sub-base build mortar (up to 200 mm thickness). Durafloor Levelbase is designed as a heavy duty sub-base underlay which forms a smooth, hard surface to be used under Durafloor Leveltop and Fosroc Cemtop GP Advanced & XD where deep sections are required. Nitomortar 903 Solvent free, general purpose, epoxy binder system. Nitomortar 903 can be combined with selected fillers and aggregates to produce epoxy mortars of various consistencies. Also used as a priming system with some Durafloor epoxy flooring products. Durafloor V Anti-Skid Heavy duty, flow applied, lightweight anti-skid surface dressing. Durafloor TF Floor topping, trowel applied, high build epoxy resin system (5 mm thickness). Supply (kg) Supply (kg) Nitomortar 903 Base Resin 20L Nitomortar 903 Base Resin 200L Nitomortar 903 Hardener 10L Nitomortar 903 Hardener 20L Nitomortar 903 Hardener 200L Floor Toppings Durafloor V Anti-Skid Base 16L Pack Durafloor V Anti-Skid Hardener 16L Pack Durafloor V Anti-Skid Fillers 16L Pack Durafloor Heavy Duty Aggregate 25kg Durafloor TF Base Resin15L Durafloor TF Hardener 5L Durafloor TF Fillers 20kg Cemtop XD Cementitious floor topping internal trafficable wear surface (6-12 mm thickness) Cemtop XD 15kg Aegis MSP Cementitious floor topping internal / external trafficable waterproofing surface (2-4 mm thickness). Aegis MSP is used to provide a strong and durable cementitious coating that can be applied to a wide variety of substrates, including concrete, concrete blocks, polystyrene blocks, aerated concrete blocks (AAC), asphalt and fibre cement. Durafloor SL Floor topping, industrial, self smoothing epoxy resin system (2-4 mm thickness). Durafloor SL provides a dense, impervious, coloured and chemically resistant floor surface which is hygienic and easy to clean Durafloor SL Base Resin 16L Pack Durafloor SL Base Resin 200L Durafloor SL Hardener 16L Pack Durafloor SL Hardener 200L Durafloor SL Fillers 10kg Durafloor SL Fillers 14kg Durafloor SLX Floor topping, industrial, self smoothing epoxy resin system for cold weather application (2-4 mm thickness) Aegis MSP Coarse Grey 20kg Aegis MSP Fine Grey 20kg Aegis Surface Primer #1 20L Durafloor SLX Base Resin 16L Pack Durafloor SLX Base Resin 200L Durafloor SLX Hardener 16L Pack Durafloor SLX Hardener 200L Durafloor SL Fillers 10kg Durafloor SL Fillers 14kg Durafloor N (Novolac) HIghly chemically resistant Novolac epoxy clear binder produces various coating and topping application systems. Durafloor N is an all purpose, highly chemically resistant Novolac epoxy coating/topping system suitable for a number of surfaces including concrete, steel and masonry Durafloor N (Novolac) Base 15L Durafloor N (Novolac) Hardener 10L 22 I Parchem Construction Supplies Pty Ltd ABN

23 TOPPINGS & COATINGS Durafloor X Durafloor X produces a topping and coating system with a textured finish, which provides a hard-wearing, chemically resistant floor that can handle extreme temperatures. The system also has anti-microbial properties which reduce the growth of bacteria and mould. Durafloor X has been designed to produce a flooring system for applications that require high resistance to mechanical stress and chemical attack, that are subject to extreme temperatures and need to be applied within a limited timeframe. Typical uses for the system are in wet processing zones in chemical processing plants and food preparation and manufacturing areas. description DURAFLOOR X COAT PART A KG KIT DURAFLOOR X COAT PART B KG KIT DURAFLOOR X COAT PART C KG KIT DURAFLOOR X PRIMER BASE 10KG KIT DURAFLOOR X PRIMER HARDENER 10KG KIT DURAFLOOR XT BASE DURAFLOOR XT HARDENER DURAFLOOR XT FILLER DURAFLOOR XT FILLER 1 Coatings Durafloor HP Floor coating, high performance epoxy, solvent free, non-tainting. Durafloor HP is a heavy duty, industrial/commercial coating for concrete floors and walls that is attractive and easily cleaned. Highly resistant to chemical attack and the action of forklift vehicular and commercial type traffic Durafloor HP Base Resin 8L Pack Durafloor HP Special Colour Base Resin 8L Pack Durafloor HP Special Colour Base Resin 16L Pack Durafloor HP Hardener 8L Pack Durafloor HP Hardener 16L Pack Durafloor HP 4L Pack Durafloor HP Special Colour 4L Durafloor HS Floor coating, economical, high build epoxy, 90% solids Durafloor HS is a heavy duty, commercial abrasion resistant treatment for concrete floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of commercial type traffic. Suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process Durafloor HS Base 8L Pack Durafloor HS Hardener 8L Pack Durafloor FC Floor/wall coating, solvent free epoxy, fast cure. A heavy duty, 100% solids, non-skid surface coating for concrete and steel floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of vehicular and foot traffic Durafloor FC 4L Pack Durafloor TC PLUS Trafficable Coating System. To provide a hard wearing surface, reduce noise and improve the appearance of multi-storey car park floors and other trafficable areas in both new construction and refurbishment projects. Available as an external waterproof system for exposed car park decks and a wearing coat system for intermediate car park levels, basements and other internal trafficable areas. Nitoflor FC100 Floor sealer, general purpose solvent based, UV stable, acrylic coating. Nitoflor can be used as a sealer for concrete floors to provide a dustproof and more easily cleaned surface with resistance to penetration of oils and other liquids. Ideal for warehouses, car parks, light industrial buildings, etc PRIMER BASE 10KG KIT PRIMER HARD 10KG KIT MEMBRANE BASE KIT 15KG MEMBRANE HARD KIT 15KG BODY COAT BASE 20KG KIT BODY COAT HARD 20KG KIT T/COAT MED GRY BASE T/COAT ALL COLOUR HARD T/COAT SP COLOUR BASE Please contact your nearest branch regarding aggregate options for Durafloor TC Plus Nitoflor FC100 Clear 20L Nitoflor FC100 Clear 200L Nitoflor FC100 Special Colour 20L Nitoflor FC100 T&G Grey 20L Nitoflor FC100 T&G Grey 200L Nitoflor FC120 HB Coloured floor coating, chlorinated rubber, UV stable, for trafficable floors and carparks. Nitoflor FC120 is suitable for use in heavy traffic areas such as light industrial traffic, stairs, fuel station forecourts, driveways and parking stations Nitroflor FC120 HB Black 20L Nitroflor FC120 HB Silver Grey 20L Flooring Contractors I 23

24 COATINGS / decorative FLOOR TOPPINGS Nitoflor FC130 Floor/wall coating, economical, water based epoxy, chemical resistant. Nitoflor FC130 is used to provide a dust-proof, easily cleaned surface which is resistant to most oils and liquids. It is suitable for use on walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and light vehicular traffic. Durafloor PU Single pack, high build, clear high gloss, high abrasion resistant polyurethane coating. Durafloor PU is a high build coating, formulated for both interior and exterior applications to provide a clear, high gloss, high abrasion resistant finish Nitoflor FC130 Base For Colour Packs 3L Nitoflor FC130 Clear Base 2.9L Nitoflor FC130 Clear Hardener 13.1L Nitoflor FC130 Mid Grey Hardener 13L Nitoflor FC130 Silver Grey Hardener 13L Nitoflor FC130 Silver Trophy Hardener 13L Nitoflor FC130 Special Colour Hardener 13L Nitoflor FC130 Silver Grey 4L Pack Durafloor SR Modified synthetic rubber based flooring coating. Specifically formulated to provide quick drying, hard wearing, trafficable surfaces for floors including workshops, storerooms, undercover parking areas et Toppings & Coatings Colour Packs Durafloor Colour Paks Available in Durafloor SL, TF, HS, HP, FC & N See Durafloor Colour Chart for colours. description DURAFLOOR COL PAK BANKSIA 0.5KG DURAFLOOR COL PAK CREAM 0.5KG DURAFLOOR COL PAK FERN GREEN 0.5KG DURAFLOOR COLOUR PAK BLACK 0.5KG DURAFLOOR COLOUR PAK HARBOUR BLUE 0.5KG DURAFLOOR COLOUR PAK KOALA GREY 0.5KG DURAFLOOR COLOUR PAK LIGHT GREY BLUE 0.5KG DURAFLOOR COLOUR PAK OFF WHITE 0.5KG DURAFLOOR COLOUR PAK PASTEL GREY 0.5KG DURAFLOOR COLOUR PAK RASPBERRY 0.5KG DURAFLOOR COLOUR PAK SAFETY YELLOW 0.5KG DURAFLOOR COLOUR PAK SAND 0.5KG DURAFLOOR COLOUR PAK SILVER GREY 0.5KG DURAFLOOR COLOUR PAK WOOLWORTHS RED 0.5KG DURAFLOOR COLOUR PAK WOOLWORTHS GREY 0.5KG Decorative Floor Toppings Lustreseal M20 Premium Polyurethane, High Solids Sealer. The toughest sealer in the Lustreseal range - very high gloss and extremely hard. Suitable over Mastershield polymer flooring, Covacrete and other concrete (incl. Stamp/Stencil) and masonry surfaces in thoroughly dry conditions. Also ideal over polished concrete. M20 is a moisture curing single pack polyurethane. UA20A UA20B description UA20 Urethane Acrylic - 8.7Lt Part A UA20 Urethane Acrylic Lt Part B Mastershield M50 Economical Epoxy Flooring or Surface Primer. A two pack Aqueous Epoxy that can be used as a primer or as a base for epoxy flooring. May be tinted (aqueous tints), flaked or sprayed in contrasting flecks. Provides a low gloss, satin finish. Highly economical epoxy flooring. FOR INSIDE USE - Special application for outside use. MS50A MS50NTA MS50B description Mastershield - M50-5L - Part A - Opaque Base NSI Mastershield - M50-5L - Part A - Neutral Base NSI NLA Mastershield - M50-5L - Part B - For Opaque and Neutral Bases NSI 24 I Parchem Construction Supplies Pty Ltd ABN

25 DECOrative floor TOPPINGS & concrete sealers Mastershield M90 Premium Epoxy Commercial Flooring Product. Premium Polymer flooring product. May be tinted, flaked and other decorative inclusions. Clear product that may be used to suspend objects, graphics or lighting for a novelty feature floor. Chemical resistant - ideal for commercial and industrial floors. FOR INSIDE USE - Special application for outside use. MS90A MS90B MS90C MS905KIT MS90MVA description Mastershield - M90-6L - Part A Mastershield - M90-4L - Part B Mastershield - M90-2L - Part C - Fast Cure Hardener NLA Mastershield UA20 High Solids, Gloss Urethane Sealer Mastershield - M90-5L Kit Mastershield - M90 - MV Part A Used as a high gloss finish and advanced protection over Mastershield polymer flooring, Covacrete, Stampcrete, Stencilcrete and other concrete and masonry surfaces. Also ideal over polished concrete. Exceptional performance for economy. UA20A UA20B description UA20 Urethane Acrylic - 8.7Lt Part A UA20 Urethane Acrylic Lt Part B aqueous tints Colour liquid dispersion of organic and inorganic pigments USES For colouring Mastershield M50, Covacrete Base Powder. MTBIS MTBON MTCLA MTMUS MTOUT MTSIL MTTAN MTBRWHT MTBRBL MTBRTY MTBRTR MTBRTG MTBRTB Mastershield FLAKE Decorative flooring polymer flake. description Mastershield - Aqueous Tint - Biscuit Mastershield - Aqueous Tint - Bone Mastershield - Aqueous Tint - Clay Mastershield - Aqueous Tint - Musk Mastershield - Aqueous Tint - Outback Mastershield - Aqueous Tint - Silver Grey Mastershield - Aqueous Tint - Tan Mastershield - Aqueous Tint - White Mastershield - Aqueous Tint - Black Mastershield - Aqueous Tint - Bright Yellow Mastershield - Aqueous Tint - Bright Red Mastershield - Aqueous Tint - Bright Green Mastershield - Aqueous Tint - Bright Blue Mastershield Polymer Flake is used in decorative Polymer Flooring. PFFLA description Mastershield Flake - Flake Various NSI lustreseal colour tint Colour liquid dispersion of organic and inorganic pigments. USES Lustreseal Colour Tint is added to Lustreseal Acrylic Sealer to give various shades of colour to stamped, stencilled or plain concrete. Can also be used to tint Mastershield M90. LSAPR LSBAR LSBEI LSBLA LSBLU LSBRI LSBRO LSBUR LSCHA LSCIN LSCOF LSCRE LSGRY LSGUM LSLIG LSMAR LSNUT LSROS LSSAH LSSAN LSTER LSVIN LSWHI description LUSTRESEAL TINT APRICOT 1LTR LUSTRESEAL TINT BARLEY 1LTR LUSTRESEAL TINT BEIGE 1LTR LUSTRESEAL TINT BLACK 1LTR LUSTRESEAL TINT BLUESTONE 1LTR LUSTRESEAL TINT BRICK RED 1LTR LUSTRESEAL TINT BRONZE 1LTR LUSTRESEAL TINT BURGUNDY 1LTR LUSTRESEAL TINT CHARCOAL 1LTR LUSTRESEAL TINT CINNAMON 1LTR LUSTRESEAL TINT COFFEE BROWN 1LTR LUSTRESEAL TINT CREAM 1LTR LUSTRESEAL TINT GREY 1LTR LUSTRESEAL TINT BLUE GUM 1LTR LUSTRESEAL TINT LIGHT TERRACOTTA 1LTR LUSTRESEAL TINT MARIGOLD 1LTR LUSTRESEAL TINT NUTMEG 1LTR LUSTRESEAL TINT BLUSHING ROSE 1LTR LUSTRESEAL TINT SAHARA SAND 1LTR LUSTRESEAL TINT SAND 1LTR LUSTRESEAL TINT TERRACOTTA 1LTR LUSTRESEAL TINT VINTAGE BUFF 1LTR LUSTRESEAL TINT WHITE 1LTR external Concrete Sealers Acrylic Sealer Standard sealer used for stencil & stamped surfaces. Good all-round concrete sealer. Durable Easy to apply & maintain Semi gloss finish High clarity Tintable Used as a high quality, gloss protective finish over decorative and other concrete and masonry surfaces. For best results, first prime with Lustreseal Superbond. ACR5 5 ACR20 20 ACR Extended Wear Plus Hard wearing, high gloss sealer. High durability Excellent fuel, oil, mould & fungi resistance Semi gloss - high clarity Excellent marking resistance Used for extended longevity in place of Acrylic Sealer for most concrete and masonry surfaces. Provides superior protection from the ingression of dirt, mould, fungi, fuel and oil. High quality wet-look finish. For best results, first prime with Lustreseal Superbond. EXT20 20 EXT Flooring Contractors I 25

26 concrete sealers / tools & equipment MATT finish SEALER When a natural look is more appealing than a gloss. Natural low lustre Good marking resistance Hard wearing Stylish alternative Tintable Used as a natural low sheen finish coat for most decorative concrete or masonry surfaces. Popular as an alternative finish for internal floors and also as a natural look finish for resurfaced concrete, stamped impression concrete and stencil concrete. Low lustre masks minor marking and scuffing. For best results, first prime with Lustreseal Superbond. (Not to be used as a first coat primer). ACRM20 20 Flooring Tools & Equipment Hopper Gun MH-MP001 HOPPER GUN FOR TEXTURE SPRAYING HG2006 MARSHALLTOWN HOPPER GUN HG2007 HOPPER GUN SPEAR & JACKSON 13L Pressure Sprayer MH-SP35C 13LT PRESSURE SPRAYER (CONC SEALER) Chapin Premium Sprayer Solvent SA6007 CHAPIN PREMIER SPRAYER SOL4 4 SOL10 10 SOL20 20 MIXERS/STIRRERS/PADDLES Superbond Same day prime sealer. Excellent moisture tolerance Priming sealer High penetration & adhesion Flexible Ideal for use as resealing primer Great for sealing exposed aggregate Use as same day sealer/primer for concrete and primer for masonry and natural stone surfaces (for porous stone - test before use). Also suitable for resealng - provides essential flexibility between finish coats (See Reseal Guide). Must be over-coated with a finish sealer upon surface curing (with the exception of exposed aggregate). SUP20 20 SUP internal Concrete Sealers Waterbased Acrylic Sealer The Green Choice for the environmentally smart consumer. Low odour and ideal for confined spaces or indoor applications. Low odour - very low VOC Good marking resistance Medium gloss Self-crosslinking polymer Water clean up Tintable MH-MDR56 MH-MDR57 MH-MDR58 MH-MDR56 MIXER - 85 X 500MM WITH 8MM HEX SHAFT MH-MDR57 MIXER X 600MM WITH 10MM HEX SHAFT MH-MDR58 MIXER X 600MM WITH M14 THREADED TOP MH-MDR59 MIXER X 600MM WITH M14 THREADED TOP Survey Paint MH-ZINCGAL 400G - GALVANISING SPRAY AMS-350BLK Spray & Mark 350Ml Black AMS-350B Survey Marking Paint Blue AMS-350FB Survey Marking Paint Fluro Blue AMS-350FG Survey Marking Paint Fluro Green AMS-350FO Survey Marking Paint Fluro Orange AMS-350FP Survey Marking Paint Fluro Pink AMS-350FY Survey Marking Paint Fluro Yellow AMS-350W Survey Marking Paint White AMS-350Y Survey Marking Paint Yellow THREADED TOP WBS20 20L Brooms Length (mm) FB mm BROOM HEAD C/W FIXED BRACKET FB mm BROOM HEAD C/W FIXED BRACKET FB mm BROOM HEAD C/W FIXED BRACKET 26 I Parchem Construction Supplies Pty Ltd ABN

27 TOOls & Equipment ELECTRIC MIXER 1600W, 240V/50Hz for extra torque 2 speed gear box Variable speed control M14 female thread Lightweight Soft grip handles Professional German quality Ideal for mixing render and plaster compound With FREE mixing paddle Mixing Buckets Squeegees MH SQUEEGEE ALUM FRAME - 450MM MH SQUEEGEE ALUM FRAME - 600MM MH SQUEEGEE ALUM FRAME - 900MM MH-EV160 Cam Rakes FL-MWR CAM 1 - FOR CAM GAUGE RAKE FL-MWR CAM 2 - FOR CAM GAUGE RAKE FL-MWR CAM 3 - FOR CAM GAUGE RAKE FL-MWR CAM 4 - FOR CAM GAUGE RAKE FL-MWR CAM 5 - FOR CAM GAUGE RAKE FL-MWR CAM 6 - FOR CAM GAUGE RAKE FL-MWR CAM 8 - FOR CAM GAUGE RAKE FL-MWR CAM GUAGE RAKE 1200MM FL-MWR CAM GUAGE RAKE 600MM FL-MWR CAM GUAGE RAKE 900MM FL-MWR REPLACEMENT WIRE SET OF 3 FL-MWR REPLACEMENT WIRE SET OF 4 FL-MWR SET OF CAM SIZES: 1-8 FL-MWR WIRE GUAGE RAKE 600MM FL-MWR58734 WIRE GUAGE RAKE 900MM Square Trowels 1600W ELECTRIC MIXER Rollers SA mm ADJUSTABLE FRAMEAND EXTENTION POLE SA6039 ALUMINIUM EXTENTIONPOLE 1.2M TO 2.4M FT0027 EXTENSION HANDLE (TEXP)1.2 METER MH-LW LAMBSWOOL COVER - 230MM MH-PK1 PAINT KIT-TRAY,ROLLER & COVER SA6036 PRO SERIES COVER 230MM SHORT NAP 6MM MH-RC938 ROLLER COVER - 10MM NAP - 230MM SA6003 ROLLER COVER 230M LAMBSWOOL COVERS SA6002 ROLLER COVER 270X 20mm PROD CODE 3313 SA6001 ROLLER COVER 460mm FINE TEXTURE SA6006 ROLLER FRAME - 230mm SA6005 ROLLER FRAME - 270mm SA6037 SPIKED ROLLER 9 + FRAME SA6032 YOKE FRAME 460MM (SC ROLLER) Walking Trowel FW-555 WALKING TROWEL 600MM ROUND ENDS FW-557 WALKING TROWEL 600MM ROUND ENDS S/S Blade Dimension (mm) Blade Gauge FP x 120 Light S* = Stainless Steel Pointed Trowels FP1002 Floor Scraper Blade Dimension (mm) Blade Gauge FP x 365 Light FP x 355 Light FP x 405 Light FP x 450 Light FP x 500 Light S* = Stainless Steel ProSoft Handle Blower MH-FS mm Wide Blade MH-FS150SB 150 mm Spare Blade MH-FS mm Wide Blade MH-FS200SB 200 mm Spare Blade MH-FS mm Wide Blade MH-FS300SB 300 mm Spare Blade MH-FS mm Wide Blade MH-FS355SB 355 mm Space Blades Brushes HT-RB24E Blower Length ARW x 19 x 5cm Hippo Mixer HIPPO MIXER Flooring Contractors I 27

28 ventilating fans AMERIC VENTILATING FANS The Americ VAF-3000 Series of industrial ventilators are ideal for use in confined spaces that require a powerhouse air ventilator. They rise above the rest blowing away their competion and can handle the most demanding industrial ventilation requirements. The Americ ventilators can deliver both positive and negative airflow of up to 59 m3/min and can provide all the continuous circulating airflow needed to get your job done. The VAF-3000P (pneumatic) also meets strict hazardous space standards, delivering high performance with uncompromising safety. Features Impact and weather resistant high density polyethylene plastic construction. Dual wall design protects the interior fan chamber from external damage. Fans can be stacked vertically, maximising available working space. Virtually maintenance free - reliability, portability & durability. VAF-3000 VAF-3000P Model VAF3000 Model VAF3000P Product Code VAF-3000 Type Electric Size mm (in) 305 (12) Dimensions (l x w x h) mm 432 x 355 x 533 Operating Weight Kg Fan Speed RPM 2850 Power Output HP (Kw)) 1 (.75) Voltage volts 240 Current amp 4.2 Frequency Hz 50 Product Code VAF-3000P Type Pneumatic Size mm (in) 305 (12) Dimensions (l x w x h) mm 432 x 355 x 533 Operating Weight Kg 12.7 Fan Speed RPM 3000 Power Output HP (Kw)) 1.5 (1.1) Air Consumption cfm 38 Inlet Pressure (max) psi 100 Noise Level dba 86

29 wet / Dry vacuum FAN Accessories Accessories Ducting Duct Carrier AIP-DUCT L/Duty Ducting 305mm x 6m VAF-AM-D1225 H/Duty Quick Connect Ducting 305mm x 7.5m VAF-AM-CA12 Aluminium Ducting Coupler 305mm VAF-DSR25-12P Lightweight Polyethylene Duct Carrier (max 7.5m) VAF-CDA-3000 Carpet Drying Attachment Duct Coupler Carpet Drying Attachment Air Flow Rates VAF-3000 VAF-3000P CFM M3/Min. CFM M3/Min. Free Air m Straight m 1 x 90 bend m 2 x 90 bends m Straight m 1 x 90 bend m 2 x 90 bends m Straight m Straight industrial wet/dry vacs - aussie pumps A complete range of industrial wet/dry vacuum cleaners ranging in capacity from 30 litres through to 75 litres. The Aussie Eco-Clean industrial wet/dry vacs are available with either 1 or 2 motor combinations. Features Impact resist polypropylene barrel 7 metre durable power cable Unique Aussie Microweb, 99% filtration, reusable filter Heavy Duty Wheel Kit Professional accessory kit Benefits Powerful suction for effective cleaning Filters fine dust particles like cement dust, gyprock etc Hardwearing, long lasting Easy manoeuvrability Durable and versatile Long reach for commercial applications VS72 VS61 Model No. Capacity (Litres) Motor Water Lift (head) mm Air Flow (m³/h) Air Flow (l/s) Weight (kg) Dimensions (l x w x h) mm Clean Air 551 (VS61) 50 1 x 1200w 240v bypass 2200 (215bar) x 530 x 920 Clean Air 752 (VS72) 75 2 x 1200w 240v bypass 2400 (235bar) x 530 x 970 Flooring Contractors I 29

30 30 I Parchem Construction Supplies Pty Ltd ABN

31 At Parchem... WE SERVICE WHAT WE SELL Parchem have qualified technicians on staff, to service and repair the full range of construction equipment. Because we know your equipment can be your livelihood, Parchem offer: Written quotes on all required repairs All scheduled services A full range of genuine spare parts With service departments located across the country, you can feel confident of reduced down time. So call us for further information, and to book your next service or repair. NSW Wetherill Park: VIC Brunswick: QLD Morningside: SA Hindmarsh: WA Belmont: Flooring Contractors I 31

32 trade stores We ve got the gear you need NEW SOUTH WALES Beresfield Coffs Harbour Narellan Padstow Penrith Riverstone Tuggerah Wetherill Park AUSTRALIAN CAPITAL TERRITORY Fyshwick QUEENSLAND Arundel Brendale Gladstone Morningside Springwood Townsville WESTERN AUSTRALIA Belmont VICTORIA Brunswick Campbellfield Dandenong SOUTH AUSTRALIA Hindmarsh TASMANIA Moonah /13 Customer Service National Head Office: 7 Lucca Road, Wyong NSW The range of products will vary by location so please contact your nearest store for the range of products in stock. P:

Parchem Construction Supplies. flooring. P:

Parchem Construction Supplies. flooring. P: Parchem Construction Supplies flooring P: 1800 801 108 www.parchem.com.au CONCRETE SURFACE HARDENERS & CONCRETE FLOOR COVER UNDERLAYMENT MORTARS Nitoflor Sicaltop Floor hardener, silicon carbide/alumina

More information

Industrial Flooring Solutions. constructive solutions

Industrial Flooring Solutions. constructive solutions Industrial Flooring Solutions constructive solutions NITOFLOR FC150 HP Chemically resistant, solvent-free epoxy coating applied to concrete floors to protect against chemical attack and vehicular traffic.

More information

PRODUCT SELECTION GUIDE

PRODUCT SELECTION GUIDE PRODUCT SELECTION GUIDE Floor Sealers MasterTop 333 MasterKure 402 MasterKure 404 MasterTop 1116 Mastertop TC 406 Mastertop TC 450 Mastertop TC 471 Mastertop TC 495 Single Pack Two-pack Epoxy Polyurethane

More information

CEMENTITIOUS FLOOR FINISH

CEMENTITIOUS FLOOR FINISH CEMENTITIOUS FLOOR FINISH I N I S H SELF LEVELING AUTOLIVELLANTE Self Leveling Cementitious Mortar A fine powder composed of cement, selected aggregates, additives and special synthetic resins. When mixed

More information

Make your floor a unique artwork!

Make your floor a unique artwork! Make your floor a unique artwork! Content: Floor Expert EP 101... 08 Floor Expert EP 1013... 09 Floor Expert EP 310W... 10 Floor Expert EP 311...11 Floor Expert EP 211... 12 Floor Expert EP Combines design

More information

System Recommendation SR0618

System Recommendation SR0618 Ardex Australia Pty Ltd ABN 82 000 550 005 Unit 7, 20 Powers Road, Seven Hills NSW 2147 Australia Telephone + 61 2 9851 9100 Facsimile +61 2 9838 7970 www.ardexaustralia.com System Recommendation SR0618

More information

FLOOR PROTECTION HIGH PERFORMANCE WATER-BASED EPOXY COATINGS Epoxy Rapid WB 36 Pegakote durable WB epoxy 37 SOLVENT-FREE COATINGS

FLOOR PROTECTION HIGH PERFORMANCE WATER-BASED EPOXY COATINGS Epoxy Rapid WB 36 Pegakote durable WB epoxy 37 SOLVENT-FREE COATINGS HIGH PERFORMANCE FLOOR PROTECTION WATER-BASED EPOXY COATINGS 5800 Epoxy Rapid WB 36 Pegakote durable WB epoxy 37 SOLVENT-FREE COATINGS 5500 solvent-free epoxy 38 Basecoat Rapid SL screed 39 Rust-O-Thane

More information

Real Stone Cladding mm sandstone ashlar. Thin Sandstone Ashlar Catalogue

Real Stone Cladding mm sandstone ashlar. Thin Sandstone Ashlar Catalogue 12 15 20 mm sandstone ashlar Thin Sandstone Ashlar Catalogue 12 15 20 mm ashlar 1 SANDSTONE ASHLAR 12 15 20 MM Ashlar sandstone is the most desired and expensive stone finish for any facade. It is now

More information

Protective Coatings Product List 2015

Protective Coatings Product List 2015 List Protective Coating s Protective Coatings List 2015 Chemical Coatings Pg. 2 Corrosion Coatings Pg. 4 Concrete Repair Systems Pg. 6 Thermal Barrier, Membranes & Pipe Pg. 7 Coatings Special Coatings

More information

Fosroc Solutions for New Build Concrete Repairs. constructive solutions

Fosroc Solutions for New Build Concrete Repairs.   constructive solutions Fosroc Solutions for New Build Concrete Repairs www.fosroc.com constructive solutions Fosroc Solutions: Specialist admixtures Curing compounds Protective coatings Waterproofing Floor toppings Grouts Anchors

More information

Fosroc Nitodek UR200 System

Fosroc Nitodek UR200 System Flexible, skid-resistant car park decking system for exposed and intermediate decks Uses Waterproofing decking system for new and existing exposed car park decks and ramps. Advantages Seamless Easy to

More information

PlastCoat PC 25/ PC 35

PlastCoat PC 25/ PC 35 PlastCoat PC 25/ PC 35 The powerful ones Plaster spraying indoors and out with equipment geared to practical use. Quality Offensive! With their plaster spraying units WAGNGER have made it easier to get

More information

1-part high performance sealant for flooring

1-part high performance sealant for flooring Product Data Sheet Edition 26/07/2007 Identification no: 02 05 01 01 005 0 000001 Sikaflex PRO-3 WF 1-part high performance sealant for flooring Construction Product Description Uses Characteristics /

More information

VISHWAS WATER PROOFING & CHEMICAL INC.

VISHWAS WATER PROOFING & CHEMICAL INC. VISHWAS WATER PROOFING & CHEMICAL INC. B-115,1 st floor, Vijay Vihar, Phase-2, Delhi-85. Ph.011-64659814, 9891770111, 9999476964. FOSROC PROPOSAL FOR EPOXY FLOORING Vishwas Waterproofing & Chemical INC

More information

Technical Data Sheet. Ultralevel Bulkout. Self Levelling High Build Cementitious Underlay

Technical Data Sheet. Ultralevel Bulkout. Self Levelling High Build Cementitious Underlay Technical Data Sheet Ultralevel Bulkout Self Levelling High Build Cementitious Underlay SMF26a 03.07.13 DESCRIPTION Bostik Ultralevel Bulkout is a high build, rapid hardening self levelling polymer modified

More information

PRODUCT SELECTION GUIDE

PRODUCT SELECTION GUIDE PRODUCT SELECTION GUIDE Joint Sealants and Treatments MasterSeal 950/960/970 MasterSeal 912 Swelling paste MasterSeal 910 Swellable gasket for construction joints MasterSeal CR 195 50 ± 5 25% MasterSeal

More information

Hygienic Cladding Solutions. White, Pastel & Vibrant Colours. Satin & Gloss Ranges

Hygienic Cladding Solutions. White, Pastel & Vibrant Colours. Satin & Gloss Ranges Hygienic Cladding Solutions White, Pastel & Vibrant Colours Satin & Gloss Ranges The complete cladding solution. A quality, cost efficient, high performance hygienic wall and ceiling system that you can

More information

Fosroc Nitoflor the solution for resin flooring. constructive solutions

Fosroc Nitoflor the solution for resin flooring. constructive solutions Fosroc Nitoflor the solution for resin flooring constructive solutions For over 50 years, Fosroc has developed specialised products and services that are acknowledged to be at the cutting edge of construction

More information

EPOXY FLOORING SYSTEMS

EPOXY FLOORING SYSTEMS EPOXY FLOORING SYSTEMS DuroPoxy SLR 100 Epoxy Based Durable Top-Coat Coloured Floor Coating EPOXY FLOORING SYSTEMS Description: DuroPoxy SLR100 is a solvent free, durable floor coating based on a hard

More information

Technical Information

Technical Information Diamondtools Technical Information The Diamond Diamonds are the hardest known material.they are selected depending on the field of application. For diamond blade manufacture synthetic diamonds are solely

More information

FeRFA GUIDE TO PREPARING SUBSTRATES TO RECEIVE RESIN FLOORING AND FINISHING OF RESIN TERRAZZO SYSTEMS

FeRFA GUIDE TO PREPARING SUBSTRATES TO RECEIVE RESIN FLOORING AND FINISHING OF RESIN TERRAZZO SYSTEMS FeRFA GUIDE TO PREPARING SUBSTRATES TO RECEIVE RESIN FLOORING AND FINISHING OF RESIN TERRAZZO SYSTEMS FeRFA Guidance Note No 11 www.ferfa.org.uk 1 CONTENTS 1. INTRODUCTION... 3 2. DESCRIPTION... 3 3. SELECTION

More information

CIVILS. Road Repair. Instarmac. UltraCrete Road Repair / Ancillaries

CIVILS. Road Repair. Instarmac. UltraCrete Road Repair / Ancillaries Road Repair Instarmac UltraCrete 296-298 Road Repair / Ancillaries UltraScape 299-300 Grout / Primer / Sealant / Cement / BS7533 Bedding Mortar CIVILS CIVILS / Road Repair 295 Instarmac UltraCrete Road

More information

Construction. Sika Services AG. Sika Services AG. Sikafloor reactive resin systems

Construction. Sika Services AG. Sika Services AG. Sikafloor reactive resin systems 1 2 Content: Mixing tools and application equipment Sikafloor epoxy resin systems Sikafloor polyurethane systems 3 Brands Sikafloor Sikafloor -Pronto Sikafloor -EpoCem Sikafloor -PurCem Sikalastic Sikagard

More information

Hygienic cladding solutions. the complete internal cladding solution

Hygienic cladding solutions. the complete internal cladding solution Hygienic cladding solutions the complete internal cladding solution Hygienic cladding range overview Our range of sheets, prof iles and adhesives are made to industry leading standards to meet all customer

More information

INDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9

INDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 INDEX Bonded Abrasives (cutting & grinding discs) page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 Coated Abrasives (sanding

More information

MASTERWALL INSULATED EXTERNAL WALL SYSTEM

MASTERWALL INSULATED EXTERNAL WALL SYSTEM 117. COATING SPECIFICATION MASTERWALL REVISION DATE: MAY 2013 COATING SYSTEM SPECIFICATION: MCS-014-13/05 MASTERWALL INSULATED EXTERNAL WALL SYSTEM Rendered and texture coated finish to the Masterwall

More information

When Quality and Delivery meet pricing and commitment, this is what we excel at

When Quality and Delivery meet pricing and commitment, this is what we excel at Sealants Admixtures Bitumen Primers Injection Products Protective Coatings Polyurethane Products Tile Adhesives & Grouts Liquid Water Proofing Membranes Industrial and Heavy Duty Flooring Systems Concrete

More information

RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty

RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty RLA CERAMIC TILE ADHESIVE 10 year Limited Warranty RLA Polymers Pty Ltd; undertakes to warranty Resinflex (or RLA Flex 2- Part), and RLA Flex 1-Part, when used to install tiles over Protectowrap AFM for

More information

Construction. 1-part high performance sealant for flooring. Product Description. Environmental Information. Product Data Sheet Edition _1

Construction. 1-part high performance sealant for flooring. Product Description. Environmental Information. Product Data Sheet Edition _1 Product Data Sheet Edition 2012-03_1 1-part high performance sealant for flooring Product Description Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance.

More information

EPILOX EPOXY BINDER TECHNICAL DATA SHEET. Multi-purpose High Performance Epoxy Binder System DESCRIPTION FEATURES AND BENEFITS

EPILOX EPOXY BINDER TECHNICAL DATA SHEET. Multi-purpose High Performance Epoxy Binder System DESCRIPTION FEATURES AND BENEFITS EPILOX EPOXY BINDER Multi-purpose High Performance Epoxy Binder System DESCRIPTION Aftek Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and

More information

1-part polyurethane pourable self levelling floor joint sealant

1-part polyurethane pourable self levelling floor joint sealant Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /

More information

1 of 10. Master Materials Manufacturing Sdn. Bhd. Masterpav SW300 Sandwash. Masterpav DF400 Concrete Stain. Masterpav Zenstone Colour Chart

1 of 10. Master Materials Manufacturing Sdn. Bhd. Masterpav SW300 Sandwash. Masterpav DF400 Concrete Stain. Masterpav Zenstone Colour Chart Master Materials Manufacturing Sdn. Bhd Masterpav SW300 Sandwash Products images are for illustrative purposes only and may differ from the actual product or results Masterpav DF400 Concrete Stain Colours

More information

2013 Product Catalogue

2013 Product Catalogue 2013 Product Catalogue We Change Chemistry Of The Structure. The quality of the materials used in building and construction areas are also increasing and as a result, lifting our standarts of living to

More information

PROFESSIONAL EQUIPMENT FOR INDUSTRIAL FLOORS

PROFESSIONAL EQUIPMENT FOR INDUSTRIAL FLOORS BAUTECH UrzadzeniaBlaCK-ang 19-10-2005 20:29 Page 1 PROFESSIONAL EQUIPMENT FOR INDUSTRIAL FLOORS BAUTECH UrzadzeniaBlaCK-ang 19-10-2005 20:29 Page 2 VIBRATORY SCREEDS BAUTECH screeds employ a unique principle

More information

PlastCoat PC 15. The compact one. Interior and exterior plaster spraying with easy to use technology.

PlastCoat PC 15. The compact one. Interior and exterior plaster spraying with easy to use technology. PlastCoat PC 15 The compact one Interior and exterior plaster spraying with easy to use technology. With their plaster spraying units Wagner have made it easier to get into the machine-assisted application

More information

A. Prepare formwork shop drawings using qualified professional engineer. Include detail of fabrication, assembly, and support of formwork.

A. Prepare formwork shop drawings using qualified professional engineer. Include detail of fabrication, assembly, and support of formwork. DIVISION 03 CONCRETE 03 0100 MAINTENANCE OF CONCRETE 03 0505 UNDER SLAB VAPOR BARRIER A. Sheet vapor retarder shall be polyethylene sheet, ASTM D 4397, 10 mils thick minimum. Consult with Facilities Management

More information

Silicone-1001 Universal Key Suitable Limited Suitability Not Suitable To be used as a guide line only. Please contact our office for detailed info.

Silicone-1001 Universal Key Suitable Limited Suitability Not Suitable To be used as a guide line only. Please contact our office for detailed info. POCKET GUIDE All Round Sealant A paintable, solvent based plastic elastic sealant and is fungal resistant. Based on synthetic rubbers with good adhesion properties. Used on damp non-porous surfaces. A

More information

PAVESEAL 1 POLYSULPHIDE SEALANT POURING GRADE

PAVESEAL 1 POLYSULPHIDE SEALANT POURING GRADE IMPERIALSEALS PRODUCT DATA EJS /89/1 PAVESEAL 1 POLYSULPHIDE SEALANT POURING GRADE PAVESEAL 1 AG2 pouring grade is a two part Polysulphide Sealant which cures once the two components are mixed together

More information

Frequently Asked Questions (FAQs) Product Use

Frequently Asked Questions (FAQs) Product Use 3M TM Slip Resistant Removable Coating Frequently Asked Questions (FAQs) 3M TM Slip Resistant Removable Coating is an indoor, durable, slip resistant film layer. When cured, the film can be easily peeled

More information

Ultralevel SL Self Levelling Cementitious Underlay

Ultralevel SL Self Levelling Cementitious Underlay Technical Data Sheet Ultralevel SL Self Levelling Cementitious Underlay SMF26a 17.06.13 DESCRIPTION Bostik Ultralevel SL is a rapid hardening self-levelling, single component cementitious underlay. Bostik

More information

Installation Instructions

Installation Instructions Installation Instructions I. GENERAL INFORMATION KEY CHIP-100 FLOORING is a decorative resin flooring system consisting of clear, 100% solids epoxy resin and colored vinyl chips. KEY CHIP-100 FLOORING

More information

Fosroc Nitoproof 800 Method Statement

Fosroc Nitoproof 800 Method Statement Fosroc Nitoproof 800 Method Statement constructive solutions Section A : Health, Safety and Environment A1. Personal safety requirements: 1.1 Application should be in accordance with local / site regulations.

More information

for the master tradesman Setcrete Product Guide

for the master tradesman Setcrete Product Guide Professional Flooring products for the master tradesman Setcrete Product Guide Professional flooring products for the master tradesman Floor Levelling Compounds SETCRETE Floor Levelling Product Selector

More information

1-part elastic joint sealant and multipurpose adhesive

1-part elastic joint sealant and multipurpose adhesive Product Data Sheet Edition 31/10/2006 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages

More information

Jewel Stone. Decorative Concrete Overlay System. Part 1 GENERAL MANUFACTURER S SPECIFICATION

Jewel Stone. Decorative Concrete Overlay System. Part 1 GENERAL MANUFACTURER S SPECIFICATION SEPTEMBER 2016 Jewel Stone Decorative Concrete Overlay System MANUFACTURER S IFICATION 09 62 81 Part 1 GENERAL 1.1 RELATED SECTIONS.1 Specification 03 30 00 Cast-in-Place Concrete.2 Specification 09 70

More information

Solvent Based Clear PU Sealer

Solvent Based Clear PU Sealer PROFESSIONAL USE ONLY Solvent Based Clear PU Sealer Description EpiMax 900 Solvent Based Clear PU Sealer is a hard, stain resistant, non-yellowing, cross-linking protective sealer for concrete floor surfaces

More information

Prove a d tested si ce ore t a 30 years!

Prove a d tested si ce ore t a 30 years! Mortar Systems Prove a d tested si ce ore t a 0 years! Jointing Mortar Adhesive Slurry Bedding Mortar Quality for professionals Since our foundation in 97, we have specialised in the development, production

More information

Industrial and Decorative Epoxy Coating Systems

Industrial and Decorative Epoxy Coating Systems The Euclid Chemical Company Industrial and Decorative State-of-the-Art Polymer Solutions Modern work environments demand durability, appearance and cost effective value in concrete floor coating systems.

More information

AND SUPPORT SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE LARTEX FLO LARTEX NA PRODUCT

AND SUPPORT SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE LARTEX FLO LARTEX NA PRODUCT SERVICE AND SUPPORT S SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE Lartex Flo is a specially formulated, professional latex designed for the contractor with added characteristics

More information

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY (Page 1 of 8 ) GENERAL DESCRIPTION - Dekster 131 self levelling is a contemporary coating that achieves hard wearing, utilitarian floor surfaces in a range of natural tones to offset any style of interior.

More information

WestWood Qualität + Erfahrung. Product summary

WestWood Qualität + Erfahrung. Product summary Qualität + Erfahrung PMMA systems The development and application experience of several decades is incorporated in every product based on high-quality PMMA (polymethyl methacrylate) resins. Short cure

More information

Joint Sealants & Foam Fillers.

Joint Sealants & Foam Fillers. Joint Sealants & Foam Fillers U n i s e a l 1 5 0 U n i s e a l 2 0 0 / 9 0 C o l d p o u r U n i s e a l 2 8 0 E p i c o n A R G N u c e l l www.nufins.com 1 About Us As part of USL Group, Nufins has

More information

International Polished Concrete Institute November 2006 Toll Free (866) Website

International Polished Concrete Institute November 2006 Toll Free (866) Website International Polished Concrete Institute November 2006 Toll Free (866) 421-9550 Website www.ipcionline.org E-mail info@ipcionline.org SECTION 03365 POLISHED CONCRETE FLOOR SYSTEM PART 1 GENERAL 1.1 SECTION

More information

INDUSTRIAL FLOORING. Manufacturers of High Performance, Technically Advanced, Durable, Hygienic, HACCP Compliant Flooring Systems

INDUSTRIAL FLOORING. Manufacturers of High Performance, Technically Advanced, Durable, Hygienic, HACCP Compliant Flooring Systems INDUSTRIAL FLOORING Industrial Food and Beverage Commercial Automotive Manufacturers of High Performance, Technically Advanced, Durable, Hygienic, HACCP Compliant Flooring Systems Polyurethane Flooring

More information

RESIN FLOORING. To be read with Preliminaries/ General Conditions TYPE(S) OF FLOORING

RESIN FLOORING. To be read with Preliminaries/ General Conditions TYPE(S) OF FLOORING M12 To be read with Preliminaries/ General Conditions TYPE(S) OF FLOORING 110A - Primer reference: None or Altro Prime standard dependant on substrate - Resin flooring reference: Altro Grip 1mm slip-resistant

More information

TECHNICAL INFORMATION CEMSCREED 5

TECHNICAL INFORMATION CEMSCREED 5 TECHNICAL DATA SHEET CEMSCREED 5 Ver May 2016 TECHNICAL INFORMATION CEMSCREED 5 Product Data Sheet No. 110/03 INTRODUCTION Tarmac Cemscreed 5 is a rapid drying floor screed developed by Tarmac to fulfil

More information

Flowfast SR (3mm) Technical Profile

Flowfast SR (3mm)  Technical Profile Technical Profile FIRE RESISTANCE EN 13505-1 SLIP RESISTANCE Method described in AS4586-2013 Bfl-s1 Dry & Wet Rating is dependant on specification (in accordance with AS4586-2013) Flowfast SR (3mm) A durable,

More information

1-part elastic joint sealant and multipurpose adhesive

1-part elastic joint sealant and multipurpose adhesive Product Data Sheet Edition 15/11/2005 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages

More information

Solvent Based Clear PU Sealer

Solvent Based Clear PU Sealer Solvent Based Clear PU Sealer Description EpiMax 900 Solvent Based Clear PU Sealer is a hard, stain resistant, non-yellowing, cross-linking protective sealer for concrete floor surfaces which offers excellent

More information

Floor Care Solutions. Cost Effective, High Performance and Easy to Use Concrete Treatments

Floor Care Solutions. Cost Effective, High Performance and Easy to Use Concrete Treatments Floor Care Solutions Cost Effective, High Performance and Easy to Use Concrete Treatments Beautify your concrete floors and delight your clients with Convergent Concrete Floor Care Solutions. You ll

More information

STRUCTURAL AND WOODEN BEAMS. program

STRUCTURAL AND WOODEN BEAMS. program PULTRUDED STRIPS IN UNIDIRECTIONAL CARBON-FIBRE FABRIC WITH SUPERIOR STRENGTH FOR REINFORCEMENT AND PLATING OF CONCRETE, WOOD AND STEEL STRUCTURES REFURBISHMENT and PROTECTION Line ANCHORING AND GROUTING

More information

CONSTRUCTION PRODUCT LINE CATALOG

CONSTRUCTION PRODUCT LINE CATALOG CONSTRUCTION PRODUCT LINE CATALOG ADSEAL SILICONE SEALANT ADSEAL Doors and Windows, Siding 4580 series (neutral cure) Our most popular product. Ideal for movement and water proofing joints Meets ASTM C920,

More information

PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION

PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION DRAINAGE SOLUTIONS SINCE 1908 PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION PROVEN PERFORMANCE ARMTEC.COM

More information

Floor Screeds & Compounds

Floor Screeds & Compounds Floor s & Compounds Product Description PRIMER and DAMP PROOF MEMBRANE Smet Universal Floor Primer A concentrated styrene acrylate dispersion which can be diluted with water and is intended for use with

More information

INSTALLATION, MAINTENANCE AND CLEANING GUIDE. for KAZA products

INSTALLATION, MAINTENANCE AND CLEANING GUIDE. for KAZA products INSTALLATION, MAINTENANCE AND CLEANING GUIDE for KAZA products PAGE 3 GENERAL INSTRUCTIONS Application of KAZA tiles needs a great deal of skill and attention to detail. Approved competent contractors

More information

SUPER multi purpose structural adhesive. Polymer admixture for cement systems

SUPER multi purpose structural adhesive. Polymer admixture for cement systems SUPER multi purpose structural adhesive. Polymer admixture for cement systems DESCRIPTION A polymer admixture based upon Styrene Butadiene Co-polymer for use in concrete, renders, screeds, pointing and

More information

Generic Product Index

Generic Product Index Generic Product Index Epoxy Coatings Epoxy Tank Lining Paint High build amine adduct cured. Excellent for internal coating of storage tanks containing kerosene fuel-jp4. EC01 Special Hi-Build Epoxy Polyamine

More information

Aluminum Oxide. Application: Ideal for operation on. portable sanders to sand metal and all types of wood. Order. Grading. 3 x 21.

Aluminum Oxide. Application: Ideal for operation on. portable sanders to sand metal and all types of wood. Order. Grading. 3 x 21. ABRASIVES ABRASIVES belts series 900: spec check Material Aluminum Cast Iron Brass/Bronze Die Castings Carbon Steel Stainless Steel & Alloys Rough/Heavy Duty 24-0 Aluminum Oxide Resin Cloth stationary

More information

FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU.

FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU. FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU. WHY UZIN SCREEDS & ADDITIVES? In the current fast moving and dynamic environment,

More information

ARDEX GUIDE SPECIFICATION ARDEX K 521 Self-Leveling Concrete Topping with Aggregate Surface

ARDEX GUIDE SPECIFICATION ARDEX K 521 Self-Leveling Concrete Topping with Aggregate Surface ARDEX GUIDE SPECIFICATION ARDEX K 521 Self-Leveling Concrete Topping with Aggregate Surface SECTION 03 54 16 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings, general provisions of the Contract, and

More information

Flooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system

Flooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system FEATURES self smoothing epoxy floor screed seamless high strength decorative good chemical resistance easy to clean can be applied to green concrete with use of RonaFloor Epoxy DPM Description RonaFloor

More information

Product Guide: Primers

Product Guide: Primers Product Guide: Primers Product AM15 Water Based Epoxy Primer AM13 Fast Set Water Based Epoxy Primer AM144/154 High Performance Epoxy Coating AM77LVP High Build Epoxy Primer AM1LVP High Build Epoxy Primer

More information

FLOOR COVERING Arch206 BC-II Spring 2016

FLOOR COVERING Arch206 BC-II Spring 2016 FLOOR COVERING Arch206 BC-II Spring 2016 Floor coverings 1. Subfloors 2. Selection criteria for floor coverings 3. Ceramic and Stone Tile Flooring 4. Stone Panel Flooring 5. Terrazzo Flooring 6. Carpet

More information

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

More information

Professional Quality Materials

Professional Quality Materials Since 1970 Professional Quality Materials Formulated Exclusively for the Reinforced Composites and Cast Polymer Industries RELEASES COMPOUNDS POLISHES SEALERS Serving the FRP and Cast Polymer markets for

More information

Construction. 1-part elastic joint sealant and multipurpose adhesive. Product Description

Construction. 1-part elastic joint sealant and multipurpose adhesive. Product Description Product Data Sheet Edition 28/02/2012 Identification no: 01 05 06 01 150 0 000001 Sikaflex -11 FC + Sikaflex -11 FC + 1-part elastic joint sealant and multipurpose adhesive Construction Product Description

More information

Tidy tiles Walls, floors, stairs and tiles on tiles Building materials of brand-name quality for your home Nur im

Tidy tiles Walls, floors, stairs and tiles on tiles Building materials of brand-name quality for your home Nur im www.probau.eu Building materials of brand-name quality for your home PROBAU offers a wide range of products in many areas of application for home improvement, renovation and construction. In professional

More information

Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"

Art Mould Plastics SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966 Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand

More information

Sika India Private Limited

Sika India Private Limited +91-8042953634 Sika India Private Limited https://www.indiamart.com/sika/ Sika supplies the building and construction industry as well as manufacturing industries (automotive, bus, rail, solar and wind

More information

Dynacryl Acrylic Resin Based Protective & Anti-Carbonation Coating For Concrete & Masonry Surface

Dynacryl Acrylic Resin Based Protective & Anti-Carbonation Coating For Concrete & Masonry Surface Technical Data Sheet Dynacryl Acrylic Resin Based Protective & Anti-Carbonation Coating For Concrete & Masonry Surface Description Bostik Dynacryl is a solvent based clear acrylic coating for a protective

More information

3-component epoxy self-smoothing screed

3-component epoxy self-smoothing screed Construction Product Data Sheet Edition 26/07/2016 Identification no: 01 08 01 02 050 0 000017 3-component epoxy self-smoothing screed Product Description Uses Characteristics / Advantages Product Data

More information

TOR Technology - CEMENT

TOR Technology - CEMENT TOR Technology - CEMENT 1 TOR43 is an innovative single disc machine that is particularly suitable for heavy duty cleaning tasks. The machine uses an orbital movement which increases productivity compared

More information

Contents. SUPPORTING PRODUCTS UL-Primer 24 Moisture Seal 24 Megalastic 25

Contents. SUPPORTING PRODUCTS UL-Primer 24 Moisture Seal 24 Megalastic 25 Floor Levelling 2 Contents Bostik Green Commitment 4 Pictograms 7 Cementitous Floor Levelling Compounds 8 Floor Levelling Characteristics, Specifications And Technical Support 9 Application Instructions

More information

1-part elastic joint sealant and multipurpose adhesive

1-part elastic joint sealant and multipurpose adhesive Product Data Sheet Edition 23/08/2006 Identification no: 01 05 01 01 005 0 000001 Sikaflex -11 FC + 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics

More information

prospec.com Concrete Repair & Restoration

prospec.com Concrete Repair & Restoration prospec.com Concrete Repair & Restoration Table of Contents Product Portfolio 3 Product Enhancements 4 Product Selection Matrices 5 Construction Grout & Precast Non-shrink grouts C-1107 Construction Grout

More information

Technical Information

Technical Information This technical sales bulletin is concerned with the variety of applications and methods available using Resinflow s GPS plus it also includes the GP primer and Screed Block data sheets. Primer Latex/Cement

More information

Company Introduction

Company Introduction Product Guide Company Introduction ACT Australia Pty Ltd is an innovative Australian manufacturer offering Australian owned and made engineered adhesion systems for the ceramic tiling and waterproofing

More information

SealArm Tape TPE. Building & Joint Sealants T E C H N I C A L D A T A S H E E T. Uses. Features and Benefits

SealArm Tape TPE. Building & Joint Sealants T E C H N I C A L D A T A S H E E T. Uses. Features and Benefits Product Description is a high performance Joint Tape system for expansion, it can be used for connection joints as well as for cracks, when fixed to the joint, allows irregular and high movement in more

More information

Product Data Sheet Waterproofing Membrane for Ponds and Water Features Description Uses Suitable Surfaces Additional Uses Specification

Product Data Sheet Waterproofing Membrane for Ponds and Water Features Description Uses Suitable Surfaces Additional Uses Specification Product Data Sheet Pondseal Waterproofing Membrane for Ponds and Water Features Description Pondseal is a polyurethane / acrylic co-polymer, water based coating which when fully cured, forms an impervious,

More information

Fosroc Solutions for Car Park Decking.

Fosroc Solutions for Car Park Decking. Fosroc Solutions for Car Park Decking www.fosroc.com About Fosroc International Since the company s beginnings over 80 years ago, Fosroc has developed into an International leader in delivering Constructive

More information

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2)

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2) Techno Bond SBR Polymer bonding aid and mortar additive bonding agent for old and new concrete Uses For improving the physical properties of cementations mixes. Typical uses include, but are not limited

More information

Technical Data Sheet EpoGlass PU Code: 65

Technical Data Sheet EpoGlass PU Code: 65 Product Description: Two-component, effective acrylic aliphatic - polyurethane topcoat. Material creates a highly durable coating layer, suitable for marine industrial atmosphere and excellent resistance

More information

ABRASIVES (GB) Ltd CATALOGUE & PRICELIST 2016/17

ABRASIVES (GB) Ltd CATALOGUE & PRICELIST 2016/17 ABRASIVES (GB) Ltd CATALOGUE & PRICELIST 2016/17 Company Overview You have in your hands our new 2016/17 catalogue, showing our range of Abrasives and Consumable products. With more than 40 years experience

More information

Setting holding down bolts Floor screeds Bedding blocks Stone and bricks In contact with potable water Fine moulding.

Setting holding down bolts Floor screeds Bedding blocks Stone and bricks In contact with potable water Fine moulding. PRODUCT SHEET NATCEM 35 Description NATCEM 35 is a fast setting and fast curing mortar with a rapid strength gain that is resistant to chloride penetration, consisting of a blend of NATCEM Potable Water

More information

SHREE DUJA SPRAY EQUIPMENTS

SHREE DUJA SPRAY EQUIPMENTS ELECTRIC DRILL INJECTION PISTON PUMP - SD 04 SD-04 is one-component grouting injector which is used to inject epoxy or polyurethane filling materials to water-leaking cracks. SD-04 is a professional Injection

More information

+91-8071805186 Nakoda Enterprises http://www.nakodaenterprisesindia.com/ Nakoda Enterprises is the eminent Distributor,Supplier and Exporter offering an array of Construction Chemicals, HDPE DWC pipes

More information

Flowcoat SK (0.35mm) Technical Profile

Flowcoat SK (0.35mm)   Technical Profile Technical Profile FIRE RESISTANCE EN 13505-1 SLIP RESISTANCE Method described in AS4586-2013 Bfl-s1 Dry & Wet Rating is dependant on specification (in accordance with AS4586-2013) (0.35mm) A light non-slip,

More information

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10 CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES 283 Chapter 10 FUNCTIONAL REQUIREMENTS FUNCTIONAL REQUIREMENTS 10.1 PLASTERWORK Workmanship i. All workmanship must be within the tolerances

More information

CONSTRUCTION SPECIFICATION FOR CONCRETE PAVEMENT AND CONCRETE BASE

CONSTRUCTION SPECIFICATION FOR CONCRETE PAVEMENT AND CONCRETE BASE ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 350 MARCH 1998 CONSTRUCTION SPECIFICATION FOR CONCRETE PAVEMENT AND CONCRETE BASE 350.01 SCOPE 350.02 REFERENCES 350.03 DEFINITIONS TABLE OF CONTENTS

More information

Construction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description

Construction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description Product Data Sheet Edition 17/08/2011 Identification no: 02 08 03 03 001 0 000003 Sika Level 100 Sika Level 100 Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with

More information