KONE Talo 610 KONE Talo 710

Transcription

1 KONE Talo 610 KONE Talo 710 A KONE MonoSpace solution A KONE MiniSpace solution For luxury and high-rise residential buildings Comfortable, quiet and safe Robust, easy-to-clean, attractive cars Designed for specific traffic flow in apartments Space- and energy-efficient Proven reliability Smooth, quiet ride Wide variety of finishes to match most lobbies KONE Talo 610 Machine-room-less Speed: up to 1.6 m/s Max. no. of stops: 24 Max. travel: 70 m Max. load: 1000 kg KONE Talo 710 Reduced-size machine-room Speed: up to 6.0 m/s Max. no. of stops: 63 Max. travel: 180 m Max. load: 1000 kg

2 Interior of elevator Walls Laminate Choose from a wide variety of interiors. Any combination of wall, floor and ceiling materials is available allowing you to match virtually any lobby design. Wood Veneers Glass Walls Karelia Birch (L1) Yellowstone Beech (Beech) Saginaw Merisier (L2) Malmo Birch (Birch) Full width / full height Full width / partial height Corsica Cherry (L3) Washington Cherry (Cherry) Scandinavia Maple (L9) Malaysia Mahogany (Mahogany) Partial width / full height Partial width / partial height Tuscany Pear (L10) London Grey (L4) recycled laminate Stainless Steel Coated Metal Arizona Yellow (L5) recycled laminate Asturias Satin (F) Ontario Green (V14) Arctic Green (L6) recycled laminate Arctic Mesh (D) Monterrey Silver (R1) Tokyo Aluminium (side walls) Norsk Aluminium (rear wall) metal laminates (L100) Scottish Quad (K) Silicon Grey (R2) Norsk Aluminium (L8) metal laminate Flemish Linen (M) Dubai Vanilla (R3)

3 Mirrors Mirrors make the car appear larger and more comfortable and can help wheelchair users observe obstacles when moving out of the car. Mirrors are available in clear or smoked finish with aluminium or brushed stainless steel profiles. Floors Choose from a wide selection of floor materials. Chicago Grey (RC1) rubber Bavaria Green (RC2) rubber Florence Blue (LR1) recycled laminate Full width / partial height Full width / full height Partial width / partial height Partial width / full height Savoia Walnut (LW1) America Ciliegio (RW1) Handrails Baveno Rosa (SF1) composite stone Aluminium or stainless steel handrails can be placed on rear and/or side walls. Granada Ruby (SF3) composite stone Diorite Black (SF2) composite stone Owing to differences in printing techniques, the colors represented may not exactly match the actual colors of the product described.

4 Car Operating Panels KSC 420 KSC 520 KSC 620 The Car Operating Panel includes all interfaces needed by the user: Call buttons Special function buttons and keys (e.g. alarm, door open) Emergency light Floor position indicator Informative messages (e.g. call locked, priority calls, elevator under Fireman s drive) Provision for remote monitoring and two-way communication with a KONE service center Voice annoucer can be provided Button for door opening with extended time is designed for people with low mobility. PIN code access allows an elevator to be separated from the group. This is particularly useful when a tenant is moving into or out of an apartment and needs continuous use of an elevator. It is appreciated by residents of luxury penthouse apartments. Seats Tip-up seat can be provided for user comfort, in black or wood version.

5 Ceilings & Skirtings Iris Tranquilla (LF56) White painted (RAL9010), Asturias Satin (F) or Murano Mirror (H) stainless steel with halogen spot lights Arcus Lucens (LF68) White painted (RAL9010) or Asturias Satin (F) stainless steel with halogen spot lights Skirting and corners provide rich, attractive finishes to the wall/floor and wall/wall joints. Sidera Splendida (LF51) White painted (RAL9010), Asturias Satin (F) or Murano Mirror (H) stainless steel with fluorescent tubes Alba Serena (LF77) White painted (RAL9010) or Asturias Satin (F) stainless steel with fluorescent tubes

6 KONE Talo 610 A KONE MonoSpace Solution Planning guide Shaft dimensions Car Height (CH) Headroom Group The maximum number of elevators in a group is 3 (triplex). KONE can analyze the traffic conditions of your building and calculate the proper elevator configuration. Single entrance / Center opening Through type car / Center opening () Max. travel 40 m - Rated speed: 1.0 m/s - Max. no. of stops 16 Persons/ load kg 10/ 10/ 12/ 12/ Car size x (mm) 1400x x1500 (mm) Side opening door x 1650x1 (2010) 1650x1 (2010) 1950x1 (2110) 1x2500 Center opening door x 1x1700 (1810) 2000x1700 (1810) 1x1 2000x1 1950x1850 (1910) 2000x1850 (1910) 1x2400 (2510) 2000x2400 (2510) 2200x2400 (2510) 2150x x1850 Travel Car height (CH) 2100, 2200, 2300 mm Single entrance / Side opening kg Max. travel 70 m - Rated speed: 1.6 m/s - Max. no. of stops 24 Persons/ load kg Car size x (mm) (mm) Side opening door x Center opening door x Pit Headroom height 1.0 m/s: CH+1400 mm 1.6 m/s: CH+1600 mm, min mm Pit height 1.0 m/s 630 kg: 1300 mm 1.0 m/s to 1000 kg: 1400 mm 1.6 m/s: 1550 mm Through type car / Side opening kg () 10/ 10/ 12/ 12/ 1400x x x1 1650x1 1950x1950 1x x1 1950x1 1x1 1950x1 1950x x x2400 (2510) 1950x2400 (2510) 2150x2400 (2510) 2150x x1850

7 KONE Talo 710 A KONE MiniSpace Solution Planning guide Shaft dimensions Pit Travel Headroom Machine room Car Height (CH) Group The maximum number of elevators in a group is 4. KONE can analyze the traffic conditions of your building and calculate the proper elevator configuration. Car height (CH) 2200, 2300 mm Machine room height Clear height below beam 2100 mm Headroom height 1.0 m/s: CH+1600 mm 1.6 m/s: CH+1650 mm 2.0 m/s: CH+1850 mm 2.5 m/s: CH+2100 mm 3.0 m/s: CH+2600 mm 3.5 m/s: CH+2 mm Pit height Speed 630 kg to 1000 kg (mm) (mm) 1.0 m/s m/s m/s m/s m/s m/s Single entrance / Center opening Through type car / Center opening () wide cars Max. travel 120 m - Rated speed: 1.0, 1.6, 2.0, 2.5 m/s - Max. no. of stops 56 Persons/ load kg 10/ 10/ Single entrance / Center opening m/s Car size x (mm) (mm) Side opening door x 1600x1 (2010) 1650x1 (2010) 1600x2500 (2710) Single entrance / Side opening Center opening door x 1x1 (1810) 2000x1 (1810) 1x1 2000x1 1x2500 (2510) 2000x2500 (2510) 2000x1 Max. travel 180 m - Rated speed: 3.0, 3.5 m/s - Max. no. of stops 56 Persons/ load kg 10/ 10/ Car size x (mm) (mm) Center opening door x 1x x2150 1x x x2150 For speeds above 6 m/s, contact your local KONE Sales Office for planning assistance. Through type car / Side opening ()

8 Exterior of elevator Landing doors Arctic Mesh (D) stainless steel Asturias Satin (F) stainless steel A zinc-coated door is also available, to be painted locally by the customer. Landing signalization Landing call stations, hall lanterns and hall lantern indicators are door-mounted for easy and fast integration and to minimize the building interface, (the exception is 620 signalization which is wall-mounted; 420 and 520 can also be wall-mounted on request). Hall lantern indicators display floor position and special text messages. Dot matrix displays support a wide range of letters and numbers. Landing Call Stations Hall Lantern Indicators Flemish Linen (M) stainless steel Scottish Quad (K) stainless steel Windows are available with side or central opening in a variety of dimensions. It can be brushed stainless steel or zinc-coated. KSS 420 Front door and full front versions are also available. KSS 520 Safety features Different levels of photocell safety enhance user safety and comfort during loading and unloading. Curtain of light KSS photocell 2 photocells This insert provides an overview of the technical specifications and options possible for the KONE Talo 610/710 elevators. It is used in conjunction with the brochure Residential Buildings. This publication is for general informational purposes and we reserve the right at any time to alter the product design and specifications. No statement it contains should be construed as a warranty or condition, express or implied, as to any product, its fitness for any particular purpose or quality, or any modification or representation of the terms of any purchase agreement. Minor differences between printed and actual colors may exist. KONE, KONE MonoSpace, KONE MiniSpace, EcoDisc and KONE Talo are registered trademarks of KONE Corporation