801-MORD Mordred FIXING: Ground. ORDER No: CUSTOMER: Complied by Date AB 30/06/15 ISSUE ECN DATE SIGN /07/15 AB

Transcription

1 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

2 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Low tower.m single slide Low scramble net High fireman's pole Modified high tower with curved climbing net below Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

3 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground square x 55 deep square x 0 deep Foundations - 00 x 00 x 75 deep - 00 x 00 x 75 deep - 00 x 00 x 75 deep Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

4 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground R500 R500 R500 R500 0mm R750 R750 R500 0mm R000 R Safety surfacing 5m² of wetpour with 9.5m edging.5m² of 0mm thick wetpour.5m² of 0mm thick wetpour Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

5 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Safety surfacing 9m² of tiles with m edging 0 tiles of 0mm thick 9 tiles of 55mm thick Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

6 CUSTOMER: 0-MORD Mordred ORDER No: FIXING: Ground Safety surfacing grassmats (m x.5m) Complied by Date 0/0/5 ISSUE ECN DATE SIGN 0 7 0/07/5

7 Castle Range Curved climbing net PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT x 75 x 95 years to adult 5 Approx.75 kg Approx 0 kg SPECIFICATION Welding to EN ISO : 0 Steel plate to EN 005-: 00 Paint to EN : 005 Steel CHS to EN 055-: 00 Standard fixings to BS 9: 00 and BS 90: 00 Non-standard fixings are anti-vandal and corrosion resistant Steel-reinforced braided nylon rope with aluminium fittings INSTALLATION INSTRUCTIONS Read instructions thoroughly before commencing installation of unit Offer up the frames to the tower uprights as shown and secure in place with fixings shown NOTE Ensure the rope assembly is fitted the correct way up Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE 5-0 Page of

8 Ensure lugs are uppermost Ensure the ferrules are above the rope step ie the rope bends down 7 5 ITEM 5 7 COMPILED DATE: /0/5 QTY REV ECN SIG. DATE: PARTS LIST PART NUMBER DESCRIPTION 0- CURVED FRAME - CURVED NET ASSY 7-05 NBT SADDLE WASHER 0-0 M0 x 0 Stud 5-59 Wicksteed Washer M0 Safety Fastener 7- M0 x 0 Pent Button Head 7-0 Mx Grub Screw 0 7 0/07/5 5-0 Page of

9 Castle Range Low scramble net PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT x 5 x 0 years to adult 0 Approx kg Approx 5 kg SPECIFICATION Solid steel components to EN 007: 99 Steel CHS to EN 055-: 00 Welding to EN ISO : 0 Standard fixings to BS 9: 00 and BS 90: 00 Non-standard fixings are anti-vandal and corrosion resistant Steel-reinforced braided nylon rope with aluminium fittings INSTALLATION INSTRUCTIONS Read instructions thoroughly before commencing installation of unit Excavate foundations as shown Attach net to tower and below ground fixings as shown Fit spragging irons to the below ground fixings and position on bricks in excavated holes, ensuring the net remains taut 5 Backfill the foundations with 0.0m³ concrete ( parts gravel/ parts sand/ part cement) Allow concrete to set for hours before first use Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE 5-0 Page of

10 Foundation details Care must be taken in abnormal conditions square 750 (5) (75 for bark) Brick 5-0 Page of

11 Behind curved deck edge 7 A Against HDPE panel 5 A ( / ) ITEM 5 7 COMPILED DATE: 7/0/5 QTY REV ECN SIG. DATE: PARTS LIST PART NUMBER DESCRIPTION BELOW GROUND FIXING ASSY - LOW NET ASSY 0-5 RAPID LINK 0-00 SPRAGGING IRON 5-59 Wicksteed Washer -0 M0 Spring Washer 7-9 M0 x 50 Pent Button Head 7-0 Mx Grub Screw For Bark - Replace item with /0/5 5-0 Page of

12 Castle Range High fireman's pole PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT x 95 x 070 years to adult 5 Approx kg Approx.5 kg SPECIFICATION Steel plate to EN 005-: 00 Steel CHS to EN 055-: 00 Welding to EN ISO : 0 Paint to EN : 005 Non-standard fixings are anti-vandal and corrosion resistant INSTALLATION INSTRUCTIONS Read instructions thoroughly before commencing installation of unit Excavate foundations as shown in foundation plan Place pole on a brick in the excavated foundation and secure to tower as shown, ensuring pole is vertical Backfill foundation hole with 0.0m³ concrete ( parts gravel/ parts sand/ part cement) 5 Allow concrete to set for hours before first use Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE 5-07 Page of

13 Foundation details Care must be taken in abnormal conditions square (07) () 5 Bark Round off concrete Page of

14 5 ITEM 5 QTY PARTS LIST PART NUMBER DESCRIPTION WELDED MONKEY POLE SLIDER 0- HIGH POLE ASSY 5-59 Wicksteed Washer M0 Safety Fastener 7-7 M0 x 5 Pent Button Head 7- M0 x 5 Pent Button Head ITEM 7 9 COMPILED DATE: /0/5 QTY REV ECN SIG. DATE: FOR BARK FIX ADD PART NUMBER DESCRIPTION BELOW GROUND ASSY 0-00 SPRAGGING IRON 75- M x 5 LG HEX HD SCREW 0 7 0/07/ Page of

15 PROD. CODE SIZE Castle Range Double tower AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT x 75 x 5 years to adult Approx 5 Approx kg Approx 7 kg SPECIFICATION Solid steel components to EN 007: 99 Welding to EN ISO : 0 Steel plate to EN 005-: 00 Paint to EN : 005 Steel RHS to EN 00-: 997 HDPE to EN ISO : 99 Standard fixings to BS 9: 00 and BS 90: 00 Non-standard fixings are anti-vandal and corrosion resistant INSTALLATION INSTRUCTIONS Read instructions thoroughly before commencing installation of unit Excavate foundations as shown in the foundation plan Attach the towers together as shown, fitting the step panel and handrails. Note - some of the plates on the bottom of the legs on the short tower need to be cut back Position tower on bricks in the excavated foundations, ensuring it is plumb, square and at the correct height, orientation and distance 5 When the unit is fully assembled and all fixings secure, backfill the foundations with 0.7m³ of concrete ( parts gravel/ parts sand/ part cement) Allow concrete to set for hours before first use Note Note ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE 5-0 Page of

16 Foundation details Care must be taken in abnormal conditions square Bricks Cut back plates on short tower Loosefill Round off concrete Brick 5-0 Page of

17 Tower assembly details Page of

18 ITEM QTY PARTS LIST PART NUMBER DESCRIPTION 5-07 HIGH TOWER (FOR DOUBLE ASSY) 5-00 LOW TOWER STEP PANEL FIXING WASHER -0_Cup Black Poepplemann Cup -0_Cap Black Poepplemann Cap FIXING SPACER (5 panel) 5-59 Wicksteed Washer 9-00 M0 Binx Nut 5-0 M0 x 0 LG HEX HD SCREW 7-0 M0 x 75 Pent Button Head ITEM QTY FOR BARK FIX ADD PART NUMBER DESCRIPTION BELOW GROUND ASSY 0-00 SPRAGGING IRON 75- M x 5 LG HEX HD SCREW COMPILED DATE: 0/0/5 REV ECN SIG. DATE: 0 7 minor minor 0/07/50//55/0/ 5-0 Page of

19 Tropica.m SINGLE SLIDE PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 900/900 00x00x Up to years 00mm Approx kg Approx 7.5 kg SPECIFICATION Chute: Made from mm stainless steel sheet Guardrail: Made from Nominal bore tube to BS7 Pedestals: Made from circular hollow section to BS Fixings: Anti-vandal and corrosion resistant Welds: Copper-free conforming to 90AIB for mild steel Finish: Low lead polyester powder paint to BSEN7 INSTALLATION INSTRUCTIONS Note:- In accordance with.. EN7-:00 we recommend that slides do not face south or near due south due to heat build up Read installation instructions through before commencing erection of unit Do NOT tighten fastenings until the unit is completely assembled Excavate foundations as shown in the diagram on page Place pedestals in the foundations and prop up in position 5 Ensuring pedestals are plumb, square and upright, and at the correct height and centre of the dimensions, backfill foundations with concrete Allow hours drying time before fixings slide to pedestals Note Note M bolts to be torqued to Nm (lbft). M0 bolts to be torqued to Nm (5lbft) M bolts to be torqued to 55Nm (0lbft). All protruding screw threads to be peened over to remove sharp edges. Lifting aid will be required when installing this piece of equipment ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE 900/900 Page of 5

20 Foundations detail (Care must be taken under abnormal conditions) 59 Tower RUN-OFF Underside of slide runout to finished surface shall be a maximum dimension of 00mm Brick Foundation detail Ground fixed 500 x 500 x 75 RUN-OFF Underside of slide runout to finished surface shall be a maximum dimension of 00mm Brick Foundation detail Bark fixed 500 x 500 x /900 Page of 5

21 Surfacing & free space detail R500 R500 R000 Free space 7 7 Fixing pedestals to chute To fit pedestals to chute use M x 5 pent button head screw, placing an M fibre washer either side of the pedestal top plate Ensure spragging iron is in place before back filling the foundations /900 Page of 5

22 End plug detail Insert the two plastic plugs into slide barrier spigots before securing to slide and tower 9 0 Fixing detail to tower Attach slide and barrier to tower using M0 x 5 pent button head screws and Wicksteed washers Drill through tower uprights to fit M0 x 50 pent button head screw, M0 and M washers and M0 safety fastener to prevent possible traps 900/900 Page of 5

23 ITEM QTY PARTS LIST PART NUMBER DESCRIPTION SINGLE SLIDE BARRIER SINGLE SLIDE CHUTE ASSY 0-0 PEDESTAL SUPPORT LEG - RUNOUT 0-07 PEDESTAL SUPPORT LEG - MIDDLE 0-0 SPRAGGING IRON -005 END PLUG (¼ NB) 57-0 M Fibre Washer 5-59 Wicksteed Washer M Plain Washer 5-50 M0 Washer M0 Safety Fastener 7-7 M x 5 Pent Button Head 7-9 M0 x 50 Pent Button Head 7- M0 x 5 Pent Button Head COMPILED DATE: /0/ REV ECN SIG. DATE: minor /0/ 900/900 Page 5 of 5

24 DESPATCH LIST Sheet of Product: 0-MORD Mordred Date of Issue: /0/5 Order No: Issue: A Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch High tower (mod) assembly 0-5 Deck bottom panel * Deck top panel * Low tower assembly 0-5 Step panel Curved frame 0- Curved net assembly - 9 Below ground fixing assembly Low net assembly - High pole assy 0- Single slide barrier Single slide chute assembly Pedestal support leg - runout Pedestal support leg - middle 0-07 Welded monkey pole slider Fixing pack Total No. of Items Picked By: Checked By: COMPILED REV 0 BY: ECN No. 7 minor minor DATE /0/5 0//5 5/0/ DATE: /0/5 SIGN

25 FIXINGS LIST Sheet of Product: 0-MORD Mordred Date of Issue: /0/5 Order No: Issue: A Item Unit Qty Description Part No. Checked Double tower Fixing washer * Black Poeppelmann cup * -0 Black Poeppelmann cap * -0 Fixing spacer (5 panel) * Wicksteed washer * 5-59 M0 binx nut * M0 x 50 hex head bolt * 5-0 Fixing washer Black Poeppelmann cup -0 0 Black Poeppelmann cap -0 Fixing spacer (5 panel) Wicksteed washer 5-59 M0 binx nut 9-00 M0 x 75 pent button head screw M0 x 0 hex head screw 5-0 High fireman's pole 7 Wicksteed washer 5-59 M0 x 5 pent button head screw 7-9 M0 x 5 pent button head screw M0 safety fastener Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 0 BY: ECN No. 7 minor minor DATE /0/5 0//5 /0/ DATE: /0/5 SIGN

26 FIXINGS LIST Sheet of Product: 0-MORD Mordred Date of Issue: /0/5 Order No: Issue: A Item Unit Qty Description Part No. Checked Curved climbing net NBT saddle washer 7-05 M0 x 0 stud 0-0 Wicksteed washer 5-59 M0 safety fastener M0 x 0 pent button head screw 7- M x grub screw 7-0 Low scramble net 7 Rapid link 0-5 Spragging iron Wicksteed washer M0 spring washer -0 M0 x 50 pent button head screw 7-9 M x grub screw 7-0.m single slide Spragging iron 0-0 M fibre washer Wicksteed washer 5-59 M x 5 pent button head screw M0 x 5 pent button head screw 7- M0 x 50 pent button head screw M0 washer 5-50 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 0 BY: ECN No. 7 minor minor DATE /0/5 0//5 /0/ DATE: /0/5 SIGN

27 FIXINGS LIST Sheet of Product: 0-MORD Mordred Date of Issue: /0/5 Order No: Issue: A Item Unit Qty Description Part No. Checked.m single slide (cont) 0 M washer M0 safety fastener End plug (¼ NB) * -005 M0/M pent key 7-00 Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 0 BY: ECN No. 7 minor minor DATE /0/5 0//5 /0/ DATE: /0/5 SIGN