Guide Specification SECTION QUARTZ AGGLOMERATE COUNTERTOPS
|
|
- Eric Hill
- 6 years ago
- Views:
Transcription
1 May Industrial Park PO Box 490 Holstein, Iowa Toll Free Phone Fax Website Guide Specification Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, including MasterFormat, SectionFormat, and PageFormat. This section must be carefully reviewed and edited by the Architect to meet the requirements of the Project and local building code. Coordinate this section with Division 01, other specification sections, and the Drawings. Delete all Specifier Notes after editing this section. Section numbers and titles are based on MasterFormat 2014 Update. SECTION QUARTZ AGGLOMERATE COUNTERTOPS Specifier Notes: This section covers GeoScapes Architectural Stone Surfaces quartz countertops with TruQuartz and VersaTop product lines. Consult for assistance in editing this section for the specific application. PART 1 GENERAL 1.1 SECTION INCLUDES A. Quartz countertops. Quartz Countertops
2 1.2 RELATED REQUIREMENTS Specifier Notes: Edit the following list of related sections as required for Project. Limit the list to sections with specific information that the reader might expect to find in this section, but is specified elsewhere. A. Section Rough Carpentry: Blocking and supports. B. Section Joint Sealants. 1.3 REFERENCE STANDARDS Specifier Notes: List reference standards used elsewhere in this section, complete with designations and titles. A. Architectural Woodwork Institute / Architectural Woodwork Manufacturers Association of Canada / Woodwork Institute ( / / 1. AWI/AWMAC/WI Architectural Woodwork Standards, Section 11 Countertops. B. ASTM International (ASTM) ( 1. ASTM C 97 / C 97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone. 2. ASTM C 170 / C 170M Standard Test Method for Compressive Strength of Dimension Stone. 3. ASTM C 241 / C 241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic. 4. ASTM C 501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser. 5. ASTM C 531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes. 6. ASTM C 648 Standard Test Method for Breaking Strength of Ceramic Tile. 7. ASTM C 650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances. 8. ASTM C 880 / C 880M Standard Test Method for Flexural Strength of Dimension Stone. 9. ASTM D 523 Standard Test Method for Specular Gloss. C. British Standards Institution (BSI): 1. BS EN Agglomerated stone. Test methods. Determination of impact resistance. 2. BS EN Agglomerated stone. Test methods. Determination of chemical resistance. D. EN 101 Ceramic Tiles - Determination Of Scratch Hardness Of Surface According To Mohs. Quartz Countertops
3 1.4 PREINSTALLATION MEETINGS Specifier Notes: Edit preinstallation meetings as required for Project. Delete if not required. A. Convene preinstallation meeting [1 week] [2 weeks] before start of Work of this Section. B. Require attendance of parties directly affecting Work of this Section, including Contractor, Architect, installer, and manufacturer s representative. C. Review the Following: 1. Materials. 2. Examination. 3. Preparation. 4. Installation. 5. Adjusting. 6. Cleaning. 7. Protection. 8. Coordination with other Work. 1.5 SUBMITTALS Specifier Notes: Edit submittal requirements as required for Project. Delete submittals not required. A. Comply with Division 01. B. Product Data: Submit manufacturer s product data, including preparation and installation instructions. Specifier Notes: Edit shop drawings as required for Project. C. Shop Drawings: Submit manufacturer s shop drawings, including plans, elevations, sections, and details, indicating: 1. Dimensions, tolerances, materials, components, attachments, fabrication, edge profiles, corners, overhangs, backsplashes, and location of joints. 2. Locations and sizes of cutouts and holes for items to be installed in quartz countertops. 3. Locations and sizes of blocking, supports, and reinforcements to support quartz countertops. D. Samples: Submit manufacturer s sample chips of quartz material. E. Manufacturer s Certification: Submit manufacturer s certification that materials comply with specified requirements and are suitable for intended application. F. Test Reports: Submit manufacturer s test reports from testing performed by qualified, independent testing laboratories. Quartz Countertops
4 G. Manufacturer s Project References: Submit manufacturer s list of successfully completed quartz countertop projects, including project name and location, name of architect, and type and quantity of quartz countertops furnished. H. Installer s Project References: Submit installer s list of successfully completed quartz countertop projects, including project name and location, name of architect, and type and quantity of quartz countertops installed. I. Care and Maintenance Instructions: Submit manufacturer s care and maintenance instructions, including cleaning and repairing instructions. J. Warranty Documentation: Submit manufacturer s standard warranty. 1.6 QUALITY ASSURANCE A. Manufacturer s Qualifications: Manufacturer regularly engaged, for preceding 5 years, in the manufacturing of quartz countertops of similar type to that specified. B. Installer's Qualifications: 1. Installer regularly engaged, for preceding 5 years, in installation of quartz countertops of similar type to that specified. 2. Employ persons trained for installation of quartz countertops. 1.7 DELIVERY, STORAGE, AND HANDLING A. Delivery Requirements: Deliver quartz countertops to site in accordance with manufacturer s instructions. B. Storage and Handling Requirements: 1. Store and handle quartz countertops in accordance with manufacturer s instructions. 2. Store quartz countertops vertically in clean, dry area indoors, raised above floor. 3. Protect quartz countertops during storage, handling, and installation from dirt, stains, scratches, cracks, and other damage. 4. Protect edges and corners from damage. 5. Do not store or transport quartz countertops flat. 6. Do not drop or drag quartz countertops. PART 2 PRODUCTS 2.1 MANUFACTURERS A. Manufacturer:, 1000 Industrial Park, PO Box 490, Holstein, Iowa Toll Free Phone Fax Website info@vtindustries.com. Specifier Notes: Specify if substitutions will be permitted. B. Substitutions: [Not permitted] [Comply with Division 01]. Quartz Countertops
5 2.2 QUARTZ COUNTERTOPS A. Quartz Countertops: GeoScapes Architectural Stone Surfaces. 1. Material: Engineered quartz material, composed of 92 percent quartz and 8 percent polyester resin. a. Heat, scratch, and stain resistant. b. Solid and uniform throughout material thickness. 2. Certifications: a. NSF International. b. GREENGUARD. 3. Unit Weight: Specifier Notes: Include unit weight of quartz countertops for specified thickness. a. Thickness 1.5 cm: 9 lbs per square foot. b. Thickness 2 cm: 11 lbs per square foot. c. Thickness 3 cm: 15 lbs per square foot. 4. Factory Finish: High-gloss polish. Specifier Notes: Consult for availability of custom-size sheets. 5. Sheet Size: 118 inches by 55 inches. Specifier Notes: Specify TruQuartz or VersaTop product lines. B. Product Line: TruQuartz quartz countertops. Specifier Notes: Specify Terra, Designer, or Lux collection. 1. Collection: Terra. Specifier Notes: Specify thickness and edge profile. a. Thickness: 2 cm. [Ogee] [Bullnose]. b. Thickness: 2 cm with 4 cm edge thickness. [Ogee] [Ogee bullnose] [Bullnose] [Crescent]. c. Thickness: 3 cm. [Ogee] [Bullnose] [Crescent]. Quartz Countertops
6 Specifier Notes: Specify color. d. Color: [Chocolate Hills] [Painted Desert] [Beartooth Pass] [Glacier Point] [Laguna] [Nouveau] [Castle Rock] [Matterhorn] [White Sands]. 2. Collection: Designer. Specifier Notes: Specify thickness and edge profile. a. Thickness: 2 cm. [Ogee] [Bullnose]. b. Thickness: 2 cm with 4 cm edge thickness. [Ogee] [Ogee bullnose] [Bullnose] [Crescent]. c. Thickness: 3 cm. [Ogee] [Bullnose] [Crescent]. Specifier Notes: Specify color. d. Color: [Constellation] [Galaxy Gaze] [Milky Way] [Aurora Twilight] [Midnight Eclipse] [Autumn Equinox] [Cosmic Descent]. 3. Collection: Lux. Specifier Notes: Specify thickness and edge profile. a. Thickness: 2 cm. [Ogee] [Bullnose]. b. Thickness: 2 cm with 4 cm edge thickness. [Ogee] [Ogee bullnose] [Bullnose] [Crescent]. c. Thickness: 3 cm. [Ogee] [Bullnose] [Crescent]. Specifier Notes: Specify color. d. Color: [Colosseum] [Pantheon] [Olympus] [Acropolis]. C. Product Line: VersaTop prefabricated quartz countertops. 1. Thickness: a. Deck: 1.5 cm. b. Build Down: 1.5 cm. Quartz Countertops
7 Specifier Notes: Specify kitchen tops and/or bar tops as required for Project. Specify size. Consult VT Industries Inc. regarding custom fabrication using full-size slabs. 2. Kitchen Tops: 3 finished edges, backsplash, and 1 side splash. a. Size: [114 inches by 25-3/4 inches] [84 inches by 25-3/4 inches]. 3. Bar Tops: 4 finished edges. a. Size: [114 inches by 36 inches] [84 inches by 36 inches]. Specifier Notes: Specify edge profile. 4. Edge Profile: [Eased edge] [Round over] [Bevel]. Specifier Notes: Specify color. 5. Color: [White Sands] [Napoli] [Palazzo] [Equinox] [Penumbra] [Agora]. Specifier Notes: Specify accessories required for VersaTop prefabricated quartz countertops. Delete accessories not required. 6. Accessories: a. Adhesive: Color matched. b. Sinks: [Self-rimming] [Under mount], specified in Section 22. Specifier Notes: Specify the physical properties of TruQuartz or VersaTop. D. Physical Properties: TruQuartz. 1. Gloss, ASTM D 523: 63 to Absorption by Weight, ASTM C 97: 0.02 percent. 3. Density, ASTM C 97: 2,410 kg/m Flexural Strength, ASTM C 880: a. Dry Condition: 32.5 MPa. b. Wet Condition: 38.4 MPa. 5. Compressive Strength, ASTM C 170: a. Dry Condition: MPa. b. Wet Condition: MPa. 6. Mohs Hardness, EN 101: Impact Resistance, EN : 3.60 J. 8. Chemical Resistance, EN : C4. E. Physical Properties: VersaTop. 1. Absorption by Weight, ASTM C 97: 0.06 percent. 2. Density, ASTM C 97: 2,370 kg/m Abrasion Resistance, Polished, ASTM C 241: Flexural Strength, ASTM C 880: a. Dry Condition: 34.9 MPa. b. Wet Condition: 37.5 MPa. Quartz Countertops
8 5. Compressive Strength, ASTM C 170: a. Dry Condition: 192 MPa. b. Wet Condition: 185 MPa. 6. Breaking Strength, ASTM C 648: 5,100 N. 7. Thermal Expansion, ASTM C 531: 30.9 x 10-6 /degree C. 8. Chemical Resistance, ASTM C 650: Not affected. 9. Abrasion Wear Index, ASTM C 501: FABRICATION A. Shop Fabrication: 1. Fabricate quartz countertops in accordance with manufacturer s instructions. 2. Fabricate quartz countertops to greatest extent practical in shop. B. Seams: 1. Locate and fabricate seams in accordance with manufacturer s instructions. 2. Do not locate seams through cooktop cutouts. 3. Use manufacturer s adhesives. 4. Fabricate seams to be inconspicuous. 2.4 ACCESSORIES A. Seam Adhesives: 1. Methacrylate. 2. Compatible with quartz countertops. B. Joint Sealants: percent silicone. 2. Compatible with quartz countertops. 3. Specified in Section PART 3 EXECUTION 3.1 EXAMINATION A. Examine surfaces to receive quartz countertops. B. Notify Architect of conditions that would adversely affect installation or subsequent use. C. Do not begin installation until unacceptable conditions are corrected. 3.2 PREPARATION A. Prepare surfaces to receive quartz countertops in accordance with manufacturer s instructions. B. Verify casework and surfaces to support quartz countertops are clean, dry, flat, plumb, level, square, stable, rigid, and capable of supporting the weight. C. Field Measurements: Quartz Countertops
9 1. Verify actual measurements and openings by field measurements before factory fabrication. 2. Confirm recorded measurements on shop drawings. 3. Coordinate field measurements and factory fabrication schedule with construction progress to avoid construction delays. D. Inspect quartz countertops before installation to determine they are sound and free from defects and damage. 3.3 INSTALLATION A. Install quartz countertops in accordance with manufacturer s instructions and AWI/AWMAC/WI Architectural Woodwork Standards, Section 11 Countertops. B. Install quartz countertops at locations indicated on the Drawings. C. Acclimate quartz countertops to room temperature for a minimum of 24 hours before installation. D. Install quartz countertops level, plumb, and square. E. Securely anchor quartz countertops to casework and supports. F. Install quartz countertops with proper support at perimeter, seams, joints, cutouts, and overhangs. G. Install seams to be flush, tight, and inconspicuous. H. Do not install mechanical fasteners directly into quartz countertops. I. Install joint sealants as specified in Section around bottom perimeter of quartz countertops at casework. 3.4 ADJUSTING A. Repair minor damages to finish in accordance with manufacturer s instructions and as approved by Architect. B. Remove and replace damaged quartz countertops that cannot be successfully repaired, as determined by Architect. 3.5 CLEANING A. Clean quartz countertops promptly after installation in accordance with manufacturer s instructions. B. Do not use harsh cleaning materials or methods that could damage finish. Quartz Countertops
10 3.6 PROTECTION A. Protect installed quartz countertops from dirt, stains, scratches, cracks, and other damage during construction. B. Do not use installed quartz countertops as work surfaces or storage during construction. Specifier Notes: Include a schedule of quartz countertops here, if a schedule is required in this Section. Coordinate the information in this schedule with the products specified in Part 2 of this Section. Delete this Article if a schedule is not required or is included on the Drawings. 3.7 SCHEDULES A. Quartz Countertop Schedule: END OF SECTION Quartz Countertops
Guide Specification SECTION QUARTZ AGGLOMERATE COUNTERTOPS
February 2018 11620 Goodnight Lane, Suite 100 Dallas, Texas 75229 Phone 972-243-2325 Fax 972-243-4197 Website www.us.vicostone.com Email info@vicostoneus.com Guide Specification Specifier Notes: This guide
More informationSection QUARTZ SURFACING COUNTERTOPS
Pental Quartz is a quartz-composite engineered stone that is suitable for virtually any interior surfacing application. Pental Quartz can be used for kitchen countertops, bathroom vanities, bar tops, wall
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationThe purpose of this guide specification is to assist the specifier in correctly specifying solid surface countertops including sinks and backsplashes.
(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand of solid surface. The purpose of this guide specification is to assist the specifier in correctly specifying solid surface
More informationCSI GUIDE Countertops
CSI GUIDE Countertops Part 1 General 1.0 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification Sections, apply
More informationCONSULT COLDSPRING FOR ASSISTANCE IN EDITING THIS SPECIFICATION GUIDE FOR SPECIFIC APPLICATIONS.
SECTION NUMBERS AND TITLES IN THIS SPECIFICATION UTILIZE MASTERFORMAT 2004. THIS SPECIFICATION GUIDE IS WRITTEN ACCORDING TO THE CONSTRUCTION SPECIFICATIONS INSTITUTE (CSI) THREE-PART SECTION FORMAT (1998)
More informationProduct Guide Specification
Extrutech Plastics, Inc. September 2012 5902 West Custer Street Manitowoc, Wisconsin 54220 Toll Free 888-818-0118 Phone 920-684-9650 Fax 920-684-4344 Website www.epiplastics.com E-mail info@epiplastics.com
More informationProduct Guide Specification
Extrutech Plastics, Inc. August 2018 5902 West Custer Street Manitowoc, Wisconsin 54220 Toll Free 888-818-0118 Phone 920-684-9650 Fax 920-684-4344 Website www.epiplastics.com E-mail info@epiplastics.com
More informationProduct Guide Specification
Extrutech Plastics, Inc. September 2012 5902 West Custer Street Manitowoc, Wisconsin 54220 Toll Free 888-818-0118 Phone 920-684-9650 Fax 920-684-4344 Website www.epiplastics.com E-mail info@epiplastics.com
More informationPROJECT LOCATION SECTION
SECTION 12 36 40 Note: NATURAL GRANITE VANITY TOPS For Windows 2010, upon completion of section editing, you may turn-off Specifier Notes as follows: Click on File then Options then Display and remove
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationSECTION PLASTIC SURFACING
SECTION 06067 PLASTIC SURFACING PART 1 GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply
More informationProduct Guide Specification
VT Industries, Inc. November 2012 1000 Industrial Park PO Box 490 Holstein, Iowa 51025 Toll Free (800) 827-1615 Phone (712) 368-4381 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com
More informationSECTION (09385) - SIMULATED STONE COUNTERTOPS
SECTION 12 36 61 (09385) - SIMULATED STONE COUNTERTOPS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Engineered Stone Note: Refer to Interior Finish Index to determine use a. Vanity Tops b. Countertops
More informationProduct Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
More informationHPL CSI 3-PART SPECIFICATION FORM
MARCH 2013 HPL CSI 3-PART SPECIFICATION FORM Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part
More informationSECTION SOLID SURFACE COUNTERTOPS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 06415 SOLID SURFACE COUNTERTOPS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Countertops B. Integral sinks C. Splashes D. Setting materials
More informationSECTION QUARTZ SURFACING COUNTERTOPS
SECTION 12 3661.19 QUARTZ SURFACING COUNTERTOPS This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and
More informationGuide Specification PART 1 GENERAL SECTION QUARTZ SURFACING FABRICATIONS SECTION QUARTZ SURFACING COUNTERTOPS
Guide Specification Vadara is a quartz-based fabricated stone which can be used for attractive and functional countertops, shower and tub surrounds, interior wall cladding, and other interior applications.
More informationDIVISION 6 SOLID SURFACE FABRICATIONS SECTION 06650
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification Sections, apply to this Section. 1.2
More informationSECTION SOLID SURFACE FABRICATIONS
SECTION 06651 SOLID SURFACE FABRICATIONS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationProduct Guide Specification
Merge Design Co. 3001-105 Spring Forest Road Raleigh, NC 27616 Phone (919) 800-7970 Website www.mergedesignco.com E-mail info@mergedesignco.com Product Guide Specification Specifier Notes: This product
More informationSECTION SOLID SURFACE COUNTERTOPS
SECTION 06 61 18 SOLID SURFACE COUNTERTOPS USE THIS SECTION F COUNTERTOPS. USE SECTION 06 61 16 F OTHER SOLID SURFACING APPLICATIONS INCLUDING WALL CLADDING AND MISCELLANEOUS FABRICATIONS. GENERAL NOTES
More informationPRODUCT GUIDE SPECIFICATION
PRODUCT GUIDE SPECIFICATION Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationProduct Guide Specification
Digger Specialties, Inc. May 2012 PO Box 241 Bremen, Indiana 46506 Toll Free (800) 446-7659 Phone (574) 546-5999 Fax (574) 546-5099 Web Site www.diggerspecialties.com E-mail info@diggerspecialties.com
More informationProduct Guide Specification
SofSURFACES, Inc. 4393 Discovery Line PO Box 239 Petrolia, Ontario N0N 1R0 Canada Toll Free (800) 263-2363 Phone (519) 882-8799 Fax (519) 882-2697 Website www.sofsurfaces.com E-mail alltinfo@sofsurfaces.com
More informationMaster Specifications for Microcotta November 2017
SECTION 042130 - MICROCOTTA PART 1 - GENERAL 1.1 SUMMARY A. Provide Architectural Microcotta, cast architectural polymer resin units manufactured in accordance with the Contract Documents. 1.2 WORK INCLUDED
More informationSECTION TERRAZZO FLOOR TILE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 66 16 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ----- // if not applicable to project. Also delete any other item or
More informationProduct Guide Specification
Nox-Crete Products Group 1444 South 20th Street PO Box 8102 Omaha, Nebraska 68108 Toll Free 800-669-2738 Phone 402-341-1976 Fax 800-329-6733 Website www.nox-crete.com E-mail customerservice@nox-crete.com
More informationSECTION QUARTZ SURFACE FABRICATIONS
SECTION 04731 QUARTZ SURFACE FABRICATIONS PART 1 GENERAL THE FOLLOWING SPECIFICATION IS TO BE USED FOR INTERFACING WITH ARCHITECTURAL MILLWORK AND/OR TRIM COMPONENTS. QUARTZ SURFACE IS FABRICATED LIKE
More informationBasix Solid Surface Specification Sheet
SECTION 06651 SOLID SURFACE FABRICATION 1.1 SUMMARY OF THE SOLID SURFACE FABRICATION WORK A. The solid surface fabrication work is comprised of furnishing and installing all solid surface fabrications
More informationProduct Guide Specification
VT Industries, Inc. November 2012 890 Central Court New Albany, Indiana 47150 Toll Free (800) 626-6271 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com Product Guide Specification
More informationProduct Guide Specification
SofSURFACES, Inc. September 2004 4393 Discovery Line PO Box 239 Petrolia, Ontario N0N 1R0 Canada Toll Free (800) 263-2363 Phone (519) 882-8799 Fax (519) 882-2697 Website www.sofsurfaces.com E-mail alltinfo@sofsurfaces.com
More informationSECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.
More informationSECTION EPOXY TERRAZZO TILE WITH RECYCLED GLASS MATRIX
GlassPLANK GUIDE SPECIFICATION Manufacturer: GLASS RECYCLED LLC 2939 Irving Blvd Suite 305 Dallas TX 75247 (888) 523-7894 toll free voice www.glassrecycled.com SECTION 09 66 18 EPOXY TERRAZZO TILE WITH
More informationBasix Solid Surface / Prima Decora Series Fabrication
SECTION 06651 PRIMA DECORA FABRICATION 1.1 SUMMARY OF THE PRIMA DECORA FABRICATION WORK A. The Basix Solid Surface Prima Decora fabrication work is comprised of furnishing and installing all Basix Solid
More informationSECTION ULTRACOMPACT WALL FINISHES - THIN SET
PART 1. GENERAL 1.1 SUMMARY A. Section Includes: 1. Quartz interior wall finishes. 2. Setting materials and accessories. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work
More informationDURAMAX Building Products a division of US Polymers Inc. July S Vail Ave Montebello, CA., Toll Free Phone Fax Website
DURAMAX Building Products a division of US Polymers Inc. July 2016 1057 S Vail Ave Montebello, C, 90640 Toll Free Phone Fax Website E-mail (888) 555-1013 ext 5 (323) 728-3023 (707) 237-2306 www.duramaxbp.com
More informationArchitectural Roof & Wall Products Guide Specifications MANUFACTURER KLOECKNER METALS KALAELOA BLVD, KAPOLEI, HI 96707,
Architectural Roof & Wall Products Guide Specifications MANUFACTURER KLOECKNER METALS 91-104 KALAELOA BLVD, KAPOLEI, HI 96707, 808-682-3000 This Guide Specification is to be used to develop an office master
More informationProduct Guide Specification
Kemiko Concrete Products July 2008 PO Box 1109 Leonard, Texas 75452 Phone (903) 587-3708 Fax (903) 587-9038 Web Site www.kemiko.com E-Mail sales@kemiko.com Product Guide Specification Specifier Notes:
More informationFORMICA SOLID SURFACING BY FORMICA GROUP / FABRICATIONS 3-PART TECHNICAL SPECIFICATION SECTION ( )
Formica Solid Surfacing by Formica Group 1 PART 1 - GENERAL 1.1 SUMMARY A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationB. Related Sections: 1. Division 07 Section "Joint Sealants" for sealing of expansion, contraction, control, and isolation joints in tile surfaces.
SECTION 093000 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION RESILIENT SHEET FLOORING
SECTION 09 65 16 RESILIENT SHEET FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1.
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 06651 - SOLID SURFACE FABRICATIONS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification
More informationProduct Guide Specification
VT Industries, Inc. April 2014 1000 Industrial Park PO Box 490 Holstein, Iowa 51025 Toll Free (800) 827-1615 Phone (712) 368-4381 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com
More informationSECTION FLUSH WOOD VENEER DOORS
SECTION 08212 FLUSH WOOD VENEER DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Flush Wood Veneer Doors: 1. Five-ply flush bonded doors. 2. Flush fire-rated wood doors. 3. Lead-lined doors. 4. Sound-retardant
More informationPhenolic Exterior Wall Cladding
Phenolic Exterior Wall Cladding SECTION 07 42 43 COMPOSITE WALL PANELS This specification includes hidden text for editing for a project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Phenolic wall
More informationSECTION SOLID SURFACING COUNTERTOPS
SECTION 12 3661 SOLID SURFACING COUNTERTOPS This Section specifies Wilsonart Solid Surface countertops produced by Wilsonart LLC. Wilsonart Solid Surface is an acrylic resin based solid surfacing material
More informationProduct Guide Specification
Advanced Building Products, Inc. July 2010 PO Box 98 Springvale, Maine 04083 Toll Free 800-252-2306 Phone 207-490-2306 Fax 207-490-2998 Website www.advancedflashing.com E-mail info@advancedflashing.com
More informationMay 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building
May 8, 2017 ADDENDUM #1 IFB 17-082 Resin Floor System For Highway Department Central District Building Addendum #1 is being issued to offer an alternate resin flooring system. 096700 FLUID-APPLIED FLOORING
More informationProduct Guide Specification
MFG Water Treatment Products Company 55 Fourth Avenue PO Box 458 Union City, Pennsylvania 16438 Toll Free (877) 826-2509 Phone (814) 438-3959 Fax (814) 438-8538 Web Site www.mfgwtp.com Product Guide Specification
More informationSECTION TILING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic Tile for floor applications. B. Ceramic Tile for wall applications. C. Ceramic accessories. D. Ceramic trim. E. Non-ceramic trim. 1.02 RELATED REQUIREMENTS
More informationTennant Company October North Lilac Drive Minneapolis, Minnesota Guide Specification
October 2016 701 North Lilac Drive Minneapolis, Minnesota 55422 800-553-8033 www.tennantco.com info@tennantco.com Guide Specification SECTION09 67 23 RESINOUS FLOORING (Tennant Epoxy Flake SR-HTS) PART
More informationSECTION METAL WALL PANELS
Unience USA, Inc. 2115 Linwood Avenue, Suite 500 Fort Lee, NJ 07024 Phone: 201-676-2467 Fax: 201-944-3660 Email: alfrex@alfrexusa.com Web: www.alfrexusa.com SECTION 07 42 13 METAL WALL PANELS PART 1 GENERAL
More informationProduct Guide Specification
Norplex-Micarta March 2011 665 Lybrand Street Postville, Iowa 52162 Toll Free (800) 848-4431 Phone (563) 864-7321 Fax (563) 864-4231 Website www.norplex-micarta.com E-mail info@norplex-micarta.com Product
More informationSECTION DETECTABLE GUIDE TACTILES
SECTION 09655 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for surface applied and recessed detectable guide or directional tactiles (tactiles) for use on the station platforms
More informationProduct Guide Specification
sofsurfaces Inc. 4393 Discovery Line Petrolia, ON Canada N0N 1R0 Toll Free (800) 263-2363 Phone (519) 882-8799 Fax (519) 882-2697 Website www.sofsurfaces.com E-mail info@sofsurfaces.com Product Guide Specification
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-09 66 16 (August 2016) --------------------------- Preparing Activity: USACE Superseded UFGS-09 66 16 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationGuide Specification SECTION DUCT INSULATION
March 2016 279 Humberline Drive Etobicoke, Ontario M9W 5T6 Canada Toll Free 800-837-8961 Phone 416-798-1340 Fax 416-798-1342 Website www.rfoil.com Email info@rfoil.com Guide Specification Specifier Notes:
More informationFRP Classic TM Cast Stone Fiberglass Fabrications Architectural Specification
FRP Classic TM Cast Stone Fiberglass Fabrications Architectural Specification SECTION 06610 - ARCHITECTURAL FIBERGLASS / CAST STONE PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Fabrication of
More informationEast Central College
SECTION 123623 - PLASTIC-LAMINATE-CLAD COUNTERTOPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION DECORATIVE STAINLESS STEEL DRAINS AND GRATES
PART 1 - GENERAL 1.1 SUMMARY: SECTION 05 70 00 MODERN DESIGN LINEAR DRAINS DECORATIVE STAINLESS STEEL DRAINS AND GRATES EDITING NOTE: DELETE SYSTEMS AND MATERIALS THAT ARE NOT REQUIRED FOR THE PROJECT.
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationNewTechWood America, Inc.
19111 Walden Forest Drive Suite B Houston Texas 77346 Phone: 281-570-6450 Fax: 281-661-1167 Email: richard@newtechwood.com Web: www.newtechwood.com This Manu-Spec utilizes the Construction Specifications
More informationSECTION (06415) - PLASTIC COUNTERTOPS
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: SECTION 12 36 23 (06415) - PLASTIC COUNTERTOPS 1. Plastic Laminate a. Countertops and Backsplashes b. Aprons B. Related Sections: 1.02 REFERENCES 1. Section
More informationSECTION SOUND-ABSORPTIVE PANELS
SECTION 09 77 23 SOUND-ABSORPTIVE PANELS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 General Requirements apply. 1.2 SECTION INCLUDES
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS Company Name: [Requestor s Company] Address: [Requestor s Address] City, State, Zip code: Phone: [Requestor s Phone] Fax: [Requestor s Fax] Email: [Requestor s Email] Web Site:
More informationProduct Guide Specification
OMG Roofing Products 153 Bowles Road Agawam, Massachusetts 01001 Toll Free 800-633-3800 Fax 413-821-0417 Website www.olyfast.com E-mail info@olyfast.com Product Guide Specification Specifier Notes: This
More information(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand
(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand The purpose of this guide specification is to assist the specifier in correctly specifying solid surface wall cladding, shower
More informationGuide Specification SECTION VEGETATED PROTECTED MEMBRANE ROOFING DRAINAGE MATS
, Inc. August 2015 PO Box 98 Springvale, Maine 04083 Toll Free 800-252-2306 Fax 207-490-2998 Website www.advancedbuildingproducts.com Email info@abp-1.com Guide Specification Specifier Notes: This guide
More informationSECTION ACOUSTICAL CEILINGS (CEMENTITIOUS WOOD FIBER CEILINGS)
Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com This MANU-SPEC utilizes the Construction Specifications
More informationACOUSTICAL WALL TREATMENT 09840
11750 Berea Road P.O. Box 643 Cleveland, OH 44111 Phone: (800) 886-6678 Phone: (216) 251-7888 Fax: (216) 251-9933 E-mail: sound@bright.net www.essiacoustical.com This MANU-SPEC«utilizes the Construction
More informationSECTION RESINOUS FLOORING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 67 23 1. Use this section only for NCA projects. 2. Delete // // if not applicable to project. Also delete any other item or paragraph not applicable in the
More informationSECTION DEMOUNTABLE WALLS SKY WALLS - STRATUS SYSTEM
1 SECTION 10.22.19 DEMOUNTABLE WALLS SKY WALLS - STRATUS SYSTEM PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Full height center-glazed, butt-jointed partition system. 2. Full height doors.
More informationSECTION EXTERIOR GRILLS AND SCREENS
SECTION 10 82 13 PART 1 GENERAL PART 1 1 SUMMARY A. Section Includes: 1. Exterior perforated aluminum screen wall system with Ombrae TM Optical Tile imaging technology. 2. Accessories including attachments,
More informationProduct Guide Specification
Boral Composites Inc. February 2013 200 Mansell Court East, Suite 305 Roswell, Georgia 30076 Toll Free 888-9BORAL9 (888-926-7259) Website www.boraltruexterior.com E-mail info@truexterior.com Product Guide
More informationEditing notes to assist users are separated from specification text by rows of asterisks. Delete these notes prior to final printing.
SECTION 09635 LIMESTONE FLOORING This guide specification has been prepared by TexaStone Quarries LLC to assist design professionals in the preparation of a specification section covering cut limestone
More informationSECTION Summit Phenolic Lockers (Solid Phenolic Lockers)
SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with
More informationCONCRETE TILE PAVERS
Section 32 14 13 CONCRETE TILE PAVERS (1995 MasterFormat Section 02780) Note: This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the
More informationSound-Rite Inc. #9, rd Avenue NE Calgary, AB T2A 7P3. Tel Fax Web
Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com Sound-Rite Inc. #9, 2821 3 rd Avenue NE Calgary,
More informationSECTION Paper-Composite Countertops PART 1: GENERAL
PaperStone surfaces are slabs made from paper, resin and pigment. For most of the PaperStone products, the paper component is 100% recycled. PaperStone surfaces are fabricated much like solid surfaces
More informationProduct Guide Specification
Norplex-Micarta October 2007 665 Lybrand Street Postville, Iowa 52162 Toll Free (800) 568-8108 Phone (817) 329-6191 Fax (817) 421-4208 Website www.stormblocker.com E-mail support@stormblocker.com Product
More informationHAWORTH PORCELAIN FLOORING SYSTEM CSI Specifications 03/29/2017. A. Concrete work and concrete floor sealer is specified in Section
SECTION 09 36 00 Dry-Lay Tile PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Concrete work and concrete floor sealer is specified in Section 03 30 00. B. Tiling as specified in Section 09 30 00. 1.2 SUMMARY
More informationACOUSTICAL WALL TREATMENT SECTION 09840
ACOUSTICAL WALL TREATMENT PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Site-fabricated, stretched fabric acoustical wall system built with rigid polymer stretching system to secure fabric over the wall
More informationSECTION TRANSPARENT BULLET RESISTANT ASSEMBLIES
SECTION 13 4600 TRANSPARENT BULLET RESISTANT ASSEMBLIES Page 1 of 5 USE THIS SECTION WHEN SPECIFYING C.R. LAURENCE TRANSPARENT BULLET RESISTANT BARRIER SYSTEMS WITH SPEAK THRUS, ARCH WINDOWS OR BAFFLED
More informationDecorative Fiberglass Reinforced Wall Panels
SECTION 097720 DECORATIVE FIBERGLASS REINFORCED WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Prefinished polyester glass reinforced plastic sheets and adhered to unfinished gypsum wallboard.
More informationAll proposals will be evaluated by a district committee. The following criteria/weighting will be used to evaluate each proposal:
The School District of Newberry County Request for Proposals Newberry High School Countertop/Toilet Partitions Replacement The School District of Newberry County is accepting proposals for Boys and Girls
More informationProduct Guide Specification
January 2015 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat,
More informationProduct Guide Specification
sofsurfaces Inc. 4393 Discovery Line Petrolia, ON Canada N0N 1R0 Toll Free: (800) 263-2363 Phone: (519) 882-8799 Fax: (519) 882-2697 Website: www.sofsurfaces.com E-mail: info@sofsurfaces.com Product Guide
More informationSECTION DRY-PLACED GRANITE
SECTION 04 41 11 DRY-PLACED GRANITE This guide specification utilizes recommendations and formats contained in references of the Construction Specifications Institute (CSI), including the CSI Practice
More informationNudo Guide Specification 03/01/2016 FiberScore FRP Wall Panels SECTION FIBERSCORE FIBERGLASS REINFORCED WALL PANELS
SECTION 09 7720 FIBERSCORE FIBERGLASS REINFORCED WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Prefinished polyester glass reinforced plastic sheets and adhered to unfinished [gypsum] [cementitous]
More informationSECTION SOUND-ABSORPTIVE PANELS
SECTION 09 77 23 SOUND-ABSORPTIVE PANELS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 General Requirements apply. 1.2 SECTION INCLUDES
More informationFYPON, LLC. February 2014
Section 06 66 30 EXTERIOR PVC RAILINGS AND GUARDS PART 1 - GENERAL 1.1 RELATED SECTIONS: A. All contract documents apply to work of this section; this includes but is not limited to: Agreement; Drawings;
More informationSee pages 13 and 14 of the fabrication guide for more information.
Q: What size are the Crossville Porcelain Countertop slabs? (Fabrication Guide. sec 3.1) A: The usable size of the slab is 1620mm X 3240mm (63 ¾ x 127 ½). This is 56.5 square feet. Q: What does the term
More informationSECTION ACOUSTICAL WALL TREATMENT (CEMENTITIOUS WOOD FIBER WALL PANELS)
Tectum Inc. 105 South Sixth Street Newark, OH 43055 Phone: (888) 977-9691 Phone: (740) 345-9691 Fax: (800) 832-8869 E-mail: info@tectum.com www.tectum.com This MANU-SPEC utilizes the Construction Specifications
More informationFlorock Seamless Flooring Systems
Part 1: General Florock Seamless Flooring Systems Architectural Specification FloroQuartz BC Epoxy - Colored Quartz 1/8 (0.125 mm) Double Broadcast Flooring System 1.01 System Description A. Roller-applied
More informationA. ASTM C190 - Test Method for Tensile Strength of Hydraulic Cement Mortars
SECTION 04850 (04 40 00) MSI PRECAST STONE VENEER SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. MSI Precast Stone Veneer for exterior and interior vertical surfaces. 1.2 RELATED SECTIONS Specifier Notes:
More informationSECTION BRICK FLOORING
SECTION 09 63 13 BRICK FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brick flooring
More information