DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ETHYLENE PROPYLENE DIENE MONOMER ROOFING REPORT HOLDER:

Size: px
Start display at page:

Download "DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ETHYLENE PROPYLENE DIENE MONOMER ROOFING REPORT HOLDER:"

Transcription

1 0 Most Widely Accepted and Trusted ICC ES Evaluation Rept ICC ES 000 (800) (562) es.g ESR 3026 Reissued 04/207 This rept is subject to renewal 04/208. DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ETHYLENE PROPYLENE DIENE MONOMER ROOFING REPORT HOLDER: FIRESTONE BUILDING PRODUCTS COMPANY, LLC 250 WEST 96 TH STREET INDIANAPOLIS, INDIANA EVALUATION SUBJECT: FIRESTONE RUBBERGARD EPDM SINGLE PLY ROOFING MEMBRANES Look f the trusted marks of Confmity! 204 Recipient of Prestigious Western States Seismic Policy Council (WSSPC) Award in Excellence A Subsidiary of ICC-ES Evaluation Repts are not to be construed as representing aesthetics any other attributes not specifically addressed, n are they to be construed as an endsement of the subject of the rept a recommendation f its use. There is no warranty by ICC Evaluation Service, LLC, express implied, as to any finding other matter in this rept, as to any product covered by the rept. Copyright 207 ICC Evaluation Service, LLC. All rights reserved.

2 ICC-ES Evaluation Rept (800) (562) ESR-3026 Reissued April 207 Revised August 207 This rept is subject to renewal April 208. A Subsidiary of the International Code Council DIVISION: THERMAL AND MOISTURE PROTECTION Section: Ethylene-Propylene-Diene-Monomer Roofing REPORT HOLDER: FIRESTONE BUILDING PRODUCTS COMPANY, LLC 250 WEST 96 TH STREET INDIANAPOLIS, INDIANA (800) EVALUATION SUBJECT: FIRESTONE RUBBERGARD EPDM SINGLE-PLY ROOFING MEMBRANES ADDITIONAL LISTEE: GENFLEX ROOFING S, LLC 250 WEST 96 TH STREET INDIANAPOLIS, INDIANA (800) EVALUATION SCOPE Compliance with the following code: 205, 202 and 2009 International Building Code (IBC) 203 Abu Dhabi International Building Code (ADIBC) The ADIBC is based on the 2009 IBC IBC code sections referenced in this rept are the same sections in the ADIBC. Properties evaluated: Weather resistance Fire classification Wind uplift resistance Impact resistance 2.0 USES EPDM single-ply roofing s are used as roof coverings in ballasted, adhered and mechanically fastened roofing systems. 3.0 DESCRIPTION 3. General: The EPDM Membrane Roofing Systems described in this rept consist of single-ply roofing s, (where used), barrier board slip sheet (where used), flashing, mechanical fasteners and adhesives that are installed on a combustible noncombustible deck. 3.2 EPDM Membranes: 3.2. Fire Retardant : Fire Retardant is a nonreinfced fire-resistant EPDM single-ply roofing complying with ASTM D4637, available in nominally -mil (. mm) 60-mil (.5 mm) thicknesses. The -mil-thick weighs approximately 0.3 lb/ft 2 (.5 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 9-foot-wide (30.5 m by m) rolls. The 60-mil-thick weighs approximately 0.43 lb/ft 2 (2. kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 9-foot-wide (30.5 m by m) rolls LS-FR: Standard LS-FR is a nonreinfced fire-resistant EPDM single-ply roofing complying with ASTM D4637, available in nominally -mil (. mm) 60-mil (.5 mm) thicknesses. The -mil-thick weighs approximately 0.3 lb/ft 2 (.5 kg/m 2 ) and is available in rolls of various widths, 00 feet long (30.5 m). The 60-mil-thick weighs approximately 0.43 lb/ft 2 (2. kg/m 2 ) and is available in rolls of various widths, 00 feet long (30.5 m) LS-FR PT: Standard LS-FR PT is a nominally 60-mil (.5 mm) thick, nonreinfced fire-resistant EPDM single-ply roofing complying with ASTM D4637, with a preapplied 3-inch 6-inch-wide (76 52 mm), inchthick (0.9 mm) Quick Seam tape laminated along the length of the. The weighs approximately 0.3 lb/ft 2 (.5 kg/m 2 ) and is available in rolls of various widths, 00 feet long (30.5 m) MAX: MAX is an internally-reinfced EPDM single-ply roofing complying with ASTM D4637, available in nominally -mil (. mm), 60-mil (.5 mm) 75-mil (.9 mm) thicknesses. The -mil-thick weighs approximately 0.32 lb/ft 2 (.5 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls. The 60-mil-thick weighs approximately 0.42 lb/ft 2 (2.0 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls. The 75-mil-thick weighs approximately 0.52 lb/ft 2 (2.4 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls. ICC-ES Evaluation Repts are not to be construed as representing aesthetics any other attributes not specifically addressed, n are they to be construed as an endsement of the subject of the rept a recommendation f its use. There is no warranty by ICC Evaluation Service, LLC, express implied, as to any finding other matter in this rept, as to any product covered by the rept. Copyright 207 ICC Evaluation Service, LLC. All rights reserved. Page of 8

3 ESR-3026 Most Widely Accepted and Trusted Page 2 of MAX PT: MAX PT is an internally-reinfced EPDM single-ply roofing complying with ASTM D4637, available in nominally -mil (. mm), 60-mil (.5 mm) 75-mil (.9 mm) thicknesses, with a pre-applied 3-inch 6-inch-wide (76 52 mm), (0.9 mm) Quick Seam tape laminated along the length of the. The -mil-thick weighs approximately 0.33 lb/ft 2 (.6 kg/m 2 ). The 60-mil-thick weighs approximately 0.43 lb/ft 2 (2. kg/m 2 ). The 75-mil-thick weighs approximately 0.56 lb/ft 2 (2.7 kg/m 2 ). Membranes are available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls MAX FR: Max FR is an internally-reinfced, fire-resistant, EPDM single-ply roofing complying with ASTM D4637, available in nominally -mil (. mm), 60-mil (.5 mm) 75-mil (.9 mm) thicknesses. The -mil-thick weighs approximately 0.32 lb/ft 2 (.5 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls. The 60-mil-thick weighs approximately 0.42 lb/ft 2 (2.0 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls. The 75-mil-thick weighs approximately 0.52 lb/ft 2 (2.5 kg/m 2 ) and is available in 00-foot-long by 7.5-foot- 0-foot-wide (30.5 m by m) rolls : is a nominally 90-mil (2.2 mm) thick, nonreinfced, EPDM single-ply roofing complying with ASTM D4637. The weighs approximately 0.56 lb/ft 2 (2.7 kg/m 2 ) and is available in 50-foot- 00-foot-long by 0-foot-wide ( m by 3 m) rolls : is a nominally 60-mil (.5 mm) thick, nonreinfced, bilaminate, white-on-black, cured single ply roofing complying with ASTM D4637. The weighs approximately 0.43 lb/ft 2 (2. kg/m 2 ) and is available in rolls of various widths, 00 feet long (30.5 m) : is a nominally 90-mil (2.3 mm) thick, nonreinfced, bi-laminate, white-on-black, cured single ply roofing complying with ASTM D4637. The weighs approximately 0.6 lb/ft 2 (3.0 kg/m 2 ) and is available in 00-foot-long by 0-foot-wide (30.5 m by 3 m) rolls : is a nominally 60-mil (.5 mm) thick, nonreinfced, self-adhered single-ply EPDM roofing complying with ASTM D4637. The weighs approximately 0.47 lb/ft 2 (2. kg/m 2 ) and is available in rolls of various widths in 00-foot-long (30.5 m) lengths. 3.3 Insulation: See Tables through 5 f s used with specific roofing systems. Foam plastic, where used, must have a flame-spread index of not me than 75 when tested at the maximum thickness intended f use in accdance with ASTM E84. Polyisocyanurate and polystyrene foam plastic must comply with ASTM C289 and ASTM C578, respectively, and with Chapter 26 of the IBC. 3.4 Barrierboard Coverboard: Barrierboard coverboard, when used, may be any of the following: Minimum / 4 - (6.4 mm) G-P Gypsum Cpation. Minimum / 2 - (2.7 mm) gypsum board, complying with ASTM C396. One-half- (2.7 mm) ISOGARD HD RESISTA. One-half- (2.7 mm) USG Cpation SECUROCK Gypsum Fiber Roof Board. 3.5 Fasteners: Fasteners and stress plates used to attach barrier cover boards, boards and roofing s must be crosion-resistant. Fasteners may be any of the and fasteners, plates and strips summarized in this section noted in Table All-Purpose Fasteners: An epoxycoated steel screw used in combination with the Insulation Fastening Plate to attach roofing and base sheets to steel and wood substrates. Fastener length must be sufficient to penetrate through the steel deck a minimum of 3 / 4 inch (9. mm), and into the wood deck a minimum of inch (25.4 mm) Heavy-Duty Fastener: An epoxy-coated steel screw used in combination with the Insulation Fastening Plates, Batten Strips, Seam Plates Termination Bars to attach roofing and base sheets to steel, wood and concrete decks. Fastener length must be sufficient to penetrate through the steel deck a minimum of 3 / 4 inch (9. mm), and into the wood concrete deck a minimum of inch (25.4 mm) Concrete Drive Fastener: A nonthreaded hammer-in fastener, epoxy-coated, used with Insulation Plates to attach roofing, base sheets and other accessies to structural concrete substrates. Fastener length must be sufficient to penetrate into the concrete deck a minimum of / 4 inch (32 mm) Insulation Fastening Plate: A 3-inchdiameter (76 mm) galvalume plate used in combination with fasteners to secure and base sheets to the roof deck Seam Plate: A 2-inch-diameter (50 mm), galvalume plate used in combination with All-Purpose, Heavy-Duty and Concrete Drive fasteners V-Plate: A 2.25-inch-diameter (57 mm), galvalume plate used in combination with All-Purpose, Heavy-Duty and Concrete Drive fasteners to secure MAX and QuickSeam Strips Batten Strip: A crosion-resistant, 0-foot-long by -inch-wide (3 m by 25.4 mm), galvalume metal batten strip with holes spaced 6 inches (52 mm) o.c Polymer Batten Strip: A crosionresistant polymer batten strip, with holes spaced 3 inches (76 mm) o.c., available in 250-feet-long by ¾-inch-wide (76.2 m by 9. mm) rolls QuickSeam R.M.A. Strip: A 0-inch-wide (254 mm) Max with two 3-inchwide (76 mm) strips of laminated tape on both sides along the length of the strip used to anch s to the substrate. 3.6 s: 3.6. Water Based (P) []: A contact adhesive designed f bonding EPDM products to specific substrates as specified in the rept holder s additional listee s

4 ESR-3026 Most Widely Accepted and Trusted Page 3 of 8 installation instructions. The adhesive is applied to both the the the with a coverage of approximately 00 to 20 ft 2 (9.3 to.62 m 2 ) per gallon (3.78 L), total, f both the the. See Table 2 and Tables 4A through 4F f the adhesive application rate f each specific system. Water Based (P) is an alternative to solvent based bonding adhesives. The adhesive has a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C) : Solvent-based, contact adhesives designed f bonding EPDM s and flashings to wood, metal, masonry and other substrates as specified in the rept holder s additional listee s installation instructions. Either adhesive is applied to both the the the with a coverage of approximately to 60 ft 2 (4.8 to 5.58 m 2 ) per gallon (3.78 L), total, f both the the. Each adhesive has a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C) : Solvent based, contact adhesives designed f bonding EPDM s and flashings to wood, metal, masonry and other substrates as specified in the rept holder s additional listee s installation instructions. Either adhesive is applied to both the the the with a coverage of approximately to 60 ft 2 (4.8 to 5.58 m 2 ) per gallon (3.78 L), total, f both the the. Each adhesive has a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C) : Solvent based, contact adhesives designed f bonding EPDM s and flashings to wood, metal, masonry and other substrates as specified in the rept holder s additional listee s installation instructions. Either adhesive is applied to both the the the with a coverage of approximately to 60 ft 2 (4.8 to 5.58 m 2 ) per gallon (3.78 L), total, f both the the. Each adhesive has a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C) Free : A polymer based bonding adhesive f adhering non-reinfced EPDM s to substrates on vertical and hizontal applications as specified in the rept holder s additional listee s installation instructions. The adhesive is applied to the substrate only with a coverage of approximately 50 ft 2 (.62 m 2 ) per gallon (3.78 L). The adhesive has a shelf life of 2 months when sted in unopened containers at temperature between 60 F (6 C) and 80 F (27 C) I.S.O. Twin-Pack Insulation : A two-component, low-rise, polyurethane adhesive designed f bonding roof s to deck substrate types as specified in the rept holder s additional listee s installation instructions. The components have a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C) I.S.O. FIX II: A single-component, polyurethane adhesive designed f bonding of ISO 95+ GL, Fibertop, and to substrates as specified in the rept holder s additional listee s installation instructions. The adhesive has a shelf life of 5 months when sted in unopened containers at temperatures between 50 F (0 C) and 75 F (24 C) I.S.O. STICK: A two-component, low-rise polyurethane adhesive designed f bonding s to specific deck substrate types as specified in the rept holder s additional listee s installation instructions. The components have a shelf life of 8 months when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C). 3.7 Surface Coating: AcryliTop PC-00 is an acrylic coating that may be spray-applied in one coat roller-applied using two coats. When spray-applied in one coat, the AcryliTop PC-00 has a coverage rate of approximately 00 ft 2 (9.3 m 2 ) per gallon (3.78 L). F roller application, the AcryliTop PC-00 Base Coat is applied in one coat at a coverage rate of 200 ft 2 (8.6 m 2 ) per gallon (3.78 L). The second coat of AcryliTop PC-00 is applied at a 00 ft 2 (9.3 m 2 ) per gallon (3.78 L). The AcryliTop PC-00 has a shelf life of one year when sted in unopened containers at temperatures between 60 F (6 C) and 80 F (27 C). 3.8 Impact Resistance: The EPDM roofing s described in this rept comply with the impact resistance requirements of IBC Section based testing in accdance with Section 4.6 of FM INSTALLATION 4. General: Installation of the EPDM roofing s described in this rept must comply with the applicable code, the rept holder s additional listee s published installation instructions and this rept. The rept holder s additional listee s published installation instructions must be available on the jobsite at all times during installation. The substrate to which the is to be applied must be clean, dry, and free of frost, loose fasteners, and other protrusions contaminates that will interfere with the adhesion attachment of the that will puncture the. All materials must be protected against contact with incompatible materials. Where gypsum board is used as barrier board in the roofing assembly, weather protection must be provided to prevent damage to the gypsum board pri to application of the roofing. The slope of the roof on which the single-ply systems are installed must be a minimum of / 4 :2 (2 percent slope) and must not be me than the maximum slope indicated f the particular assembly as listed in Tables through 3. Penetrations and terminations of the roof covering must be flashed and made weathertight in accdance with the requirements of the manufacturer and Section of the IBC. Where flashing is of metal, the metal must be crosion-resistant, minimum No. 26 gage [0.09 (0.483 mm)] galvanized steel. 4.2 Fire Classification: 4.2. New Construction: Roof covering systems described in Tables through 3, when installed in accdance with this rept, are classified as Class A B roof covering systems in accdance with ASTM E08 UL Reroofing: The existing deck must be inspected to verify that the structure to be reroofed is structurally sound

5 ESR-3026 Most Widely Accepted and Trusted Page 4 of 8 and adequate to suppt and secure the roofing. Class A, B, C roof covering systems may be installed over existing classified roof covering systems under the following conditions provided the resulting classification is the lower of the new and existing roofing classification: New uninsulated systems installed only over existing uninsulated assemblies. New insulated systems installed over existing uninsulated systems only. 4.3 Wind Uplift Resistance: 4.3. New Construction: The allowable wind uplift pressures f the roof covering systems described in the rept are noted in Tables 4 and 5. Metal edge securement f all roofing systems must be listed in accdance with 20 edition (205 IBC) 2003 edition (202 and 2009 IBC) of ANSI/SPRI ES- and designed and installed f wind loads in accdance with IBC Section and IBC Chapter 6. The ballasted roof covering system in Table must comply with ANSI/SPRI RP Reroofing: Roof covering systems employing mechanical fasteners must be qualified to the satisfaction of the code official as to the adequacy of fasteners penetrating through existing roof coverings into structural substrates. Since the composition and/ condition of any particular underlying existing roofing material may vary widely, reroofing with adhered systems is outside the scope of this rept. 5.0 CONDITIONS OF USE The EPDM single-ply roofing s described in this rept comply with, are suitable alternatives to what is specified in the IBC, subject to the following conditions: 5. Installation of the roofing systems must comply with the IBC, the rept holder s additional listee s published installation instructions and this rept. If there are any conflicts between the rept holder s additional listee s published installation instructions and this rept, this rept governs. 5.2 The roof covering systems must be installed only by applicats approved by Building Products Company, LLC Genflex Roofing Systems, LLC. 5.3 Foam plastic must be separated from the interi of the building by an approved thermal barrier in accdance with IBC Section Foam plastic, where used, must bear the label of an approved agency indicating that the foam plastic has a flame-spread index of not me than 75 when tested at the maximum thickness intended f use in accdance with ASTM E84 UL 723, subject to the approval of the code official. 5.5 Above-deck thermal board must comply with the applicable standards listed in IBC Table Design wind-uplift pressure on any roof area, including edge and cner zones, must not exceed the allowable wind pressure f the system installed in that particular area. Refer to the allowable wind uplift pressure f roof coverings as listed in Tables 4 and The allowable wind uplift pressures listed in Tables 4 and 5 are f the roof covering only. The deck and framing to which the roof covering is attached must be designed f the applicable components and cladding wind loads in accdance with the IBC. 5.8 Calculations demonstrating that the required wind resistance is less than the allowable wind resistance must be submitted to the code official. 5.9 When application is over existing roofs, documentation of the wind uplift resistance of the composite roof construction must be submitted to the code official f approval at the time of permit application. 5.0 The s are manufactured in Prescott, Arkansas under a quality-control program with inspections by ICC-ES. 6.0 EVIDENCE SUBMITTED Data in accdance with the ICC-ES Acceptance Criteria f Membrane Roof Covering Systems (AC75), dated July 200 (editially revised September 206). 7.0 IDENTIFICATION Each roll of roofing described in this rept is identified with a label indicating the rept holder s name ( Building Products Company, LLC) the name of the additional listee (Genflex Roofing Systems, LLC), the product name, and the evaluation rept number (ESR-3026). ROOF CLASS A F SI: inch = 25.4 mm TABLE FIRE CLASSIFICATION ASSEMBLIES BALLASTED ROOFING S SUBSTRATE Combustible noncombustible MAX. ROOF SLOPE 2:2 INSULATION 2,3 MEMBRANE SURFACING UL- classified foam plastic EPDM River-bottom stones at min. 000 lbs/00 ft 2 concrete pavers at min. 0 lbs/ft 2 Membranes must be UL-classified f roofing systems. 2 All foam plastic must be UL-classified foam plastic f roofing systems, and must be limited to the maximum thickness noted in Section 5.4 of this rept. 3 Polyisocyanurate must comply with ASTM C289. Polystyrene must comply with ASTM C578.

6 ESR-3026 Most Widely Accepted and Trusted Page 5 of 8 ROOF CLASS TABLE 2 FIRE CLASSIFICATION ASSEMBLIES ADHERED ROOFING S SUBSTRATE 2 MAX. ROOF SLOPE INSULATION,3 A Combustible / 2 :2 2 A Noncombustible 3 A Concrete / 4 :2 / 4 :2 4 A Concrete 2:2 5 A Concrete 4 / 2 :2 6 A Concrete 4:2 7 A Noncombustible / 2 :2 8 A Noncombustible 9 A Concrete / 2 :2 / 2 :2 Min. -, any ULclassified, mechanically fastened to steel deck adhered to concrete deck Min. -, any ULclassified, adhered to deck System 3 System 3 System 3 System 2 System 2 System 3 BARRIER OR COVER BD. 4 Min. / 4 -, mechanically Min. / 4 -, adhered to System 3 System 3 System 3 4 MEMBRANE TYPE ADHESIVE 4 MAX, MAX PT adhesive is (when adhesive is not used) MAX FR System 3 LS-FR, LS- FR PT, MAX MAX PT, Free, SURFACING 4 -, Free, Free, Free, Free, Free, Free - PC-00 Coating PC-00 Coating

7 ESR-3026 Most Widely Accepted and Trusted Page 6 of 8 ROOF CLASS TABLE 2 FIRE CLASSIFICATION ASSEMBLIES ADHERED ROOFING S (CONTINUED) SUBSTRATE 2 0 A Noncombustible MAX. ROOF SLOPE 3 / 4: :2 INSULATION,3 Max. 4-, adhered mechanically A Noncombustible / 2 :2 2 A Noncombustible / 2 :2 3 A Noncombustible :2 4 A Noncombustible 2 / 2 :2 ULclassified ULclassified ULclassified BARRIER OR COVER BD. 4 Min. / 4 -, mechanically Min. / 2 - ISOGARD HD System 2 System 2 4 MEMBRANE TYPE ADHESIVE 4 SURFACING 4, Free,, LS-FR, Free MAX,, SA (when an adhesive is Fire Retardant MAX FR, Free,, Free, PC-00 Coating PC-00 Coating PC-00 Coating

8 ESR-3026 Most Widely Accepted and Trusted Page 7 of 8 ROOF CLASS TABLE 2 FIRE CLASSIFICATION ASSEMBLIES ADHERED ROOFING S (CONTINUED) SUBSTRATE 2 MAX. ROOF SLOPE 5 A Noncombustible 2:2 6 A Combustible 7 A Combustible 8 B Combustible 9 B Noncombustible / 2 :2 / 2 :2 / 2 :2 / 2 :2 INSULATION,3 UL- classified Max. 4-2-, any UL- classified, mechanically Max. 4- Min GL (optional if a barrierboard coverboard is used) 20 A Combustible 3:2 2 A Noncombustible :2 22 A Noncombustible Unlimited 23 A Noncombustible 3:2 24 A Noncombustible 3:2 25 A Noncombustible 2 / 2 :2 F SI: inch = 25.4 mm. UL- classified UL- classified UL- classified, adhered mechanically System 24 BARRIER OR COVER BD. 4 System 2 Min. - ISOGARD HD RESISTA, adhered mechanically Min. / 2 - ISOGARD HD RESISTA, adhered mechanically -Min. / 2 - RESISTA adhered mechanically (optional if is used) Min. / 4 -, mechanically Min. 7 / 6 - OSB, mechanically Min. / 4 -, / 4 - plywood 7 / 6 - OSB, mechanically System MEMBRANE TYPE ADHESIVE 4 LS-FR, MAX, MAX FR, LS-FR, MAX, MAX FR, MAX FR MAX FR MAX FR MAX FR,,,, SURFACING 4 PC-00 Coating PC-00 Coating PC-00 Coating Self-Adhered - PC-00 Coating All foam plastic must be UL-classified foam plastic f roofing systems, and must be limited to the maximum thickness noted in Section 5.4 of this rept. 2 Wood deck must be minimum 5 / 32 - (.9 mm) plywood. Steel deck must be minimum No. 22 gage galvanized steel [0.030 inch (0.76 mm)]. Concrete must have a minimum compressive strength (f c ) of 2500 psi. [minimum of 24MPa is required under ADIBC Appendix L, Section 5..]. 3 Polyisocyanurate must comply with ASTM C Barrier cover boards, adhesives, s and surface coatings must be UL-classified f roofing systems. See Section 3.6 f adhesive application rates.

9 ESR-3026 Most Widely Accepted and Trusted Page 8 of 8 TABLE 3 FIRE CLASSIFICATION ASSEMBLIES MECHANICALLY FASTENED ROOFING S ROOF CLASS SUBSTRATE 2 A Noncombustible 2 A Noncombustible MAX. ROOF SLOPE / 2 :2 / 2 :2 3 A Noncombustible 2 / 2 :2 4 A Noncombustible 4:2 5 B Combustible / 2 :2 6 A Combustible 2:2 7 A Combustible F SI: inch = 25.4 mm. / 2 :2 INSULATION,3 UL- classified Max. 4- Max. 4- UL- classified Max. 4- / BARRIER OR COVER BD. 4 MEMBRANE4 SURFACING 4 Min. / 2 - ISOGARD HD RESISTA Min. / 4 -, / 4 - plywood 7 / 6 -inchthick OSB Min. / 2 - ISOGARD HD RESISTA Min. / 4 - MAX LS- FR, LS-FR PT MAX FR MAX FR LS- FR, MAX, MAX FR, MAX FR MAX FR PC-00 Coating PC-00 Coating All foam plastic must be UL-classified foam plastic f roofing systems, and must be limited to the maximum thickness noted in Section 5.4 of this rept. 2 Wood deck must be minimum 5 / 32 - (.9 mm) plywood. Steel deck must be minimum No. 22 gage galvanized steel [0.030 inch (0.76 mm)]. Concrete must have a minimum compressive strength (f c ) of 2500 psi. [minimum of 24MPa is required under ADIBC Appendix L, Section 5..]. 3 Polyisocyanurate must comply with ASTM C Barrier cover boards, s and surface coatings must be UL-classified f roofing systems.

10 ESR-3026 Most Widely Accepted and Trusted Page 9 of 8 W- W-2 W-3 DECK 3 9 / 32 -inchthick plywood 9 / 32 -inchthick plywood 5 / 32 -inch thick plywood TABLE 4A WIND RESISTANCE ADHERED ROOFING S WOOD DECKS INSULATION COVER BOARD MEMBRANE ALLOWABLE WIND TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT UPLIFT PRESSURE 2- Optional / 4 -inch thick Heavy-Duty Fastener with Insulation Fastening Plate at fastener per.78 ft 2 I.S.O. STICK continuous 3 / 4 - to -inch wide 2 inches o.c. / 2 - SECUROCK Gypsum Fiber Roof Board All-Purpose Fastener with Fastening Plate at fastener per.6 ft 2 Min. -inch thick RESISTA ISO 95+ GL F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L. I.S.O. STICK continuous 3 / 4 - to -inch wide 2 inches o.c. LVOC 68 at 60 ft 2 per gallon to LVOC 68 at 60 ft 2 per gallon to, LS-FR, Fire LVOC Retardant,, LVOC, 68, MAX, MAX FR Free at 60 ft 2 per gallon to adhesive is Insulation, barrier boards, cover boards, vap barriers, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Wood deck must be minimum 5 / 32 - (.9 mm) plywood. See Section 5.7 of this rept.

11 ESR-3026 Most Widely Accepted and Trusted Page 0 of 8 S- Steel S-2 Steel S-3 Steel S-4 Steel S-5 Steel TABLE 4B WIND RESISTANCE ADHERED ROOFING S - STEEL DECKS INSULATION COVER BOARD MEMBRANE ALLOWABLE DECK 3 WIND UPLIFT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT PRESSURE Min. 2-inchthick 4- Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per 2 ft 2 Mechanically fastened per FM preliminary fastening requirements All-Purpose Fastener with Insulation Fastening Plate at fastener per 2 ft 2 Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per 2.7 ft 2 Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per 4 ft 2 / 2 - ISOGARD HD RESISTA / 2 - ISOGARD HD RESISTA I.S.O. Twin-Pack Insulation in continuous / 2 - to 3 / 4 -inch-wide beads at Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per 2.7 ft I.S.O. Twin-Pack Insulation in continuous / 2 - to 3 / 4 -inch-wide ribbons at I.S.O. Twin-Pack Insulation in / 2 - to 3 / 4 -inchwide (when an adhesive is (when an adhesive is LS- FR, LS-FR PT, FR, MAX, MAX FR, MAX PT, (when an adhesive is (when an adhesive is SA adhesive is not used), LVOC 68 at 60 ft 2 per gallon to, LVOC 68 at 60 ft 2 per gallon to, LVOC 68 at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only, LVOC 68 at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to substrate only, LVOC 68 at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to substrate only 30 38

12 ESR-3026 Most Widely Accepted and Trusted Page of 8 TABLE 4B WIND RESISTANCE ADHERED ROOFING S - STEEL DECKS (CONTINUED) S-6 Steel S-7 Steel S-8 Steel S-9 Steel S-0 Steel INSULATION COVER BOARD MEMBRANE ALLOWABLE DECK 3 WIND UPLIFT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT PRESSURE 4-4- Min. 2-inchthick All-Purpose Fastener with Insulation Fastening Plate at fastener per 2 ft 2 All-Purpose Fastener with Insulation Fastening Plate at fastener per.6 ft 2 All-Purpose Fastener with Insulation Fastening Plate at fastener per.6 ft 2 Loose-laid Loose-laid Min. / 4 -inchthick 4- I.S.O. Twin-Pack Insulation in continuous / 2 - to 3 / 4 -inch-wide beads at I.S.O. Twin-Pack Insulation in continuous / 2 - to 3 / 4 -inch-wide beads at Min. / 4 -inchthick Min. / 4 -inchthick All-Purpose Fastener with Insulation Fastening Plate at fastener per 2. ft 2 All-Purpose Fastener with Insulation Fastening Plate at fastener per.8 ft 2 LS- FR, LS-FR PT, FR, MAX, MAX FR, MAX PT,, (when no adhesive is used) LS- FR, LS-FR PT, FR, MAX, MAX FR, MAX PT,, (when an adhesive is LS- FR, LS-FR PT, FR, MAX, MAX FR, MAX PT,,, LVOC 68 ( only) at 60 ft 2 per gallon to substrate and Free at 50 ft 2 per gallon to the substrate only, LVOC 68 at 60 ft 2 per gallon to, LVOC 68 at 60 ft 2 per gallon to WBBA (PS) at 20 ft 2 per gallon to, LVOC Single Ply 68 at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only

13 ESR-3026 Most Widely Accepted and Trusted Page 2 of 8 S- Steel S-2 Steel S-3 Steel TABLE 4B WIND RESISTANCE ADHERED ROOFING S - STEEL DECKS (CONTINUED) INSULATION COVER BOARD MEMBRANE ALLOWABLE DECK 3 WIND UPLIFT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT PRESSURE.5- Min. 2-inchthick 4- Min. 2-inchthick 4- Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at 2.67 fastener per ft 2 Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at 4 fastener per ft 2 Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per ft (when an adhesive is (when an adhesive is (when an adhesive is at ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only LVOC at 60 ft 2 per gallon to the substrate and the at 60 ft 2 per gallon WBBA (SP) at 20 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only, LVOC 68 at 60 ft 2 per gallon to, LVOC 68 at 60 ft 2 per gallon to substrate and 30 2

14 ESR-3026 Most Widely Accepted and Trusted Page 3 of 8 TABLE 4C WIND RESISTANCE ADHERED ROOFING S - STEEL DECKS WITH VAPOR BARRIER DECK 3 VAPOR BARRIER INSULATION COVERBOARD MEMBRANE ALLOWABLE WIND TYPE ATTACH- MENT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT UPLIFT PRESSURE S-4 Steel S-5 Steel V- Fce V- Fce Selfadhered and fully bonded with 3 wide side laps Selfadhered and fully bonded with 3" wide side laps.5-inch thick ISO 95+ GL.5-inch thick ISO 95+ GL I.S.O. Stick continuous 3 / 4 to -inch wide 2 inches o.c. I.S.O. Twin Pack Insulation continuous 3 / 4 to -inch wide 2 inches o.c. F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L LS-FR, Fire Retardant Rubbergard,, MAX, MAX FR adhesive is LS-FR, Fire Retardant, MAX, MAX FR adhesive is, LVOC, LVOC 68, LVOC, LVOC 68 at 60 ft 2 per gallon to at 20 ft 2 per gallon to Insulation, barrier boards, cover boards, vap barriers, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Steel deck must be minimum No. 22 gage galvanized steel [0.030 inch (0.76 mm)]. See Section 5.7 of this rept

15 ESR-3026 Most Widely Accepted and Trusted Page 4 of 8 DECK 3 S-6 Steel TABLE 4D WIND RESISTANCE ADHERED ROOFING S - STEEL DECKS WITH BARRIER BOARD BARRIER BOARD INSULATION COVER BOARD MEMBRANE ALLOW- ABLE WIND UPLIFT TYPE ATTACHMENT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT PRESSURE Min. / 4 - Heavy-Duty All- Purpose Fastener with Insulation Fastening Plate at fastener per 2 ft 2 Min..5- inchthick to max. 4-inchthick ISO in 2 layers I.S.O. Twin- Pack Insulation continuous / 2 - to 3 / 4 - inch-wide 2 inches o.c. I.S.O. FIX II I.S.O. STICK continuous 3 / 4 - to -inchwide ribbons at 2 inches o.c. F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L. Min. /4- I.S.O. Twin- Pack Insulation continuous / 2 - to 3 / 4 - inch-wide 2 inches o.c. I.S.O. FIX II I.S.O. STICK continuous 3 / 4 - to -inchwide ribbons at 2 inches o.c. adhesive is, LVOC LVOC 68 at 60 ft 2 per gallon to substrate and EPDM Solvent Free at 50 ft 2 per gallon to the substrate only Insulation, barrier boards, cover boards, vap barriers, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Steel deck must be minimum No. 22 gage galvanized steel [0.030 inch (0.76 mm)]. See Section 5.7 of this rept.

16 ESR-3026 Most Widely Accepted and Trusted Page 5 of 8 TABLE 4E WIND RESISTANCE ADHERED ROOFING S - CONCRETE DECKS DECK 3 C- Concrete C-2 Concrete C-3 Concrete C-4 Concrete INSULATION COVER BOARD MEMBRANE ALLOWABLE WIND TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT UPLIFT PRESSURE Min Min Min Min Full mopping of hot asphalt Full mopping of hot asphalt I.S.O. FIX II continuous 3 / 4 - to - inch-wide I.S.O. Twin-Pack continuous / 2 - to 3 / 4 - inch-wide Min. / 4 -inchthick Full mopping of hot asphalt / 2 - ISOGARD HD RESISTA / 2 - ISOGARD HD RESISTA I.S.O. FIX II continuous 3 / 4 - to -inch-wide I.S.O. FIX II continuous / 2 - to 3 / 4 -inch-wide adhesive is not used) adhesive is not used) adhesive is not used) adhesive is not used) at 60 ft 2 per gallon to EPDM Solvent Free at 50 ft 2 per gallon to the substrate only LVOC 68 at 60 ft 2 per gallon to substrate and EPDM Solvent Free at 50 ft 2 per gallon to the substrate only at 60 ft 2 per gallon at 20 ft 2 per gallon to EPDM Solvent Free at 50 ft 2C-3 per gallon to the substrate only LVOC 68 at 60 ft 2 per gallon to substrate and at 60 ft 2 per gallon, at 20 ft 2 per gallon to, Free at 50 ft 2 per gallon to the substrate only, 68 at 60 ft 2 per gallon to

17 ESR-3026 Most Widely Accepted and Trusted Page 6 of 8 TABLE 4E WIND RESISTANCE ADHERED ROOFING S (CONTINUED) DECK 3 C-5 Concrete C-6 Concrete C-7 Concrete INSULATION COVER BOARD MEMBRANE ALLOWABLE WIND TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT UPLIFT PRESSURE 4- ISO Followed by an optional layer of ISO 4- I.S.O. STICK continuous 3 / 4 - to -inch-wide I.S.O. Twin-Pack continuous / 2 - to 3 / 4 -inch wide 2 inches o.c. I.S.O. STICK I.S.O. FIX II applied to the substrate in continuous 3 / 4 - to -inch wide 2 inches o.c. I.S.O. STICK continuous 3 / 4 - to -inch-wide Min. / 4 -inchthick Min. / 4 -inchthick I.S.O. STICK continuous 3 / 4 - to -inch-wide I.S.O. Twin- Pack in continuous / 2 - to 3 / 4 -inch wide I.S.O. STICK I.S.O. FIX II applied to the substrate in continuous 3 / 4 - to -inch wide 2 inches o.c. adhesive is LS-FR, LS-FR PT,, MAX FR, MAX, MAX PT, Fire Retardant, Rubbergard adhesive is LVOC 68 at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only LVOC 68 at 60 ft 2 per gallon to at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only

18 ESR-3026 Most Widely Accepted and Trusted Page 7 of 8 TABLE 4E WIND RESISTANCE ADHERED ROOFING S (CONTINUED) DECK 3 C-8 Concrete C-9 Concrete C-0 Concrete INSULATION COVER BOARD MEMBRANE ALLOWABLE WIND TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT UPLIFT PRESSURE 4- Min. -inch thick RESISTA followed by optional layer of min. -inch thick RESISTA 4- I.S.O. STICK continuous 3 / 4 - to -inch-wide I.S.O. Twin-Pack continuous / 2 - to 3 / 4 -inch wide 2 inches o.c. I.S.O. STICK I.S.O. FIX II applied to the substrate in continuous 3 / 4 - inch to -inch wide I.S.O. Twin-Pack / 2 - to 3 / 4 -inch wide 2 inches o.c. / 2 - ISOGARD HD RESISTA - - I.S.O. STICK continuous 3 / 4 - to -inch-wide - - adhesive is LS-FR, LS-FR PT,, MAX, MAX FR, MAX PT,, Fire Retardant adhesive is LVOC 68 (RESISTA only) at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to the substrate only LVOC 68 at 60 ft 2 per gallon to substrate and at 60 ft 2 per gallon to Free at 50 ft 2 per gallon to substrate only LC Lightweight concrete, min. 60 psi Min..5-4-, Hunter Panels H-Shield Atlas Roofing Cp. ACFoam-II Olympic Fasteners OlyBond 500 in continuous 3 / 4 - to -inch-wide Min. / 4 -inchthick F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L. Olympic Fasteners OlyBond 500 in continuous 3 / 4 - to -inchwide adhesive is LVOC 68 at 60 ft 2 per gallon to Insulation, barrier boards, cover boards, vap barriers, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Concrete must have a minimum compressive strength (f c ) of 2500 psi [minimum of 24MPa is required under ADIBC Appendix L, Section 5..], unless otherwise noted. See Section 5.7 of this rept. 225

19 ESR-3026 Most Widely Accepted and Trusted Page 8 of 8 DECK 3 CWF TABLE 4F WIND RESISTANCE ADHERED ROOFING S CEMENTITIOUS WOOD FIBER DECKS Tectum I cementitious wood fiber INSULATION COVERBOARD MEMBRANE ALLOWABLE WIND UPLIFT TYPE,2 ATTACHMENT TYPE ATTACHMENT TYPE ATTACHMENT PRESSURE Min ISO, Hunter Panels H-Shield Atlas Roofing Cp. ACFoam- II Olympic Fasteners OlyBond 500 in continuous 3 / 4 - to -inchwide Min. / 4 - F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L. Olympic Fasteners OlyBond 500 in continuous 3 / 4 - to -inchwide adhesive is 68 at 60 ft 2 per gallon to Insulation, barrier boards, cover boards, vap barriers, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Concrete must have a minimum compressive strength (f c ) of 2500 psi [minimum of 24MPa is required under ADIBC Appendix L, Section 5..], unless otherwise noted. See Section 5.7 of this rept. NO MW- MSC- MS- MS-2 MS-3 MS-4 TABLE 5 WIND RESISTANCE MECHANICALLY FASTENED ROOFING S INSULATION MEMBRANE ALLOWABLE DECK 3 WIND UPLIFT TYPE,2 ATTACHMENT TYPE ATTACHMENT PRESSURE Wood Steel concrete Steel Steel Steel Steel Min..5-, any UL- classified Min..5-, any UL- classified Min..5-, any UL- classified Min..5-, any UL- classified Min..5-, any UL- classified Min..5-, any UL- classified Mechanically fastened per FM preliminary fastening requirements Mechanically fastened per FM preliminary fastening requirements Mechanically fastened per FM preliminary fastening requirements Mechanically fastened per FM preliminary fastening requirements Mechanically fastened per FM preliminary fastening requirements Mechanically fastened per FM preliminary fastening requirements F SI: inch = 25.4 mm; ft = m; psf = Pa; gal = L. MAX, MAX FR MAX PT MAX, MAX FR MAX PT LS-FR, LS-FR PT, FR MAX, MAX FR MAX PT LS-FR, LS-FR PT, FR MAX, MAX FR MAX PT QuickSeam R.M.A. Strip At 9 ft-6 inches o.c., with Polymer Batten Bar and All- Purpose Fasteners at 6 inches along the batten bar Heavy-Duty Fastener All- Purpose Fastener (on steel deck only) with V-Plate at 6 inches o.c. within the roof cover 7-inch laps, in rows 7 ft o.c. QuickSeam R.M.A. Strip At 7 ft o.c., with Coiled Metal Batten Bar and All-Purpose Fasteners at 6 inches along the batten bar Coiled Metal Batten Bar and Heavy-Duty Fastener at 6 inches o.c. within the roof cover 7-inch laps, in rows 7 ft o.c. QuickSeam R.M.A. Strip At 6 ft o.c., with Coiled Metal Batten Bar and Heavy Duty Fasteners at 2 inches along the batten bar Coiled Metal Polymer Batten Bar and Heavy-Duty All-Purpose Fastener at 6 inches o.c. within the roof cover 6-inch wide side laps, and in rows 7 ft o.c. Insulation, adhesives and fasteners must be FM-approved. 2 All foam plastic must be limited to the maximum thickness in accdance with Section 5.4 of this rept the maximum thickness in accdance with this table, whichever is less. 3 Wood deck must be minimum 5 / 32 - (.9 mm) plywood. Steel deck must be minimum No. 22 gage galvanized steel [0.030 inch (0.76 mm)]. Concrete must have a minimum compressive strength (f c ) of 2500 psi, unless otherwise noted. See Section 5.7 of this rept

REPORT HOLDER: FIRESTONE BUILDING PRODUCTS COMPANY, LLC 250 WEST 96 TH STREET INDIANAPOLIS, INDIANA EVALUATION SUBJECT:

REPORT HOLDER: FIRESTONE BUILDING PRODUCTS COMPANY, LLC 250 WEST 96 TH STREET INDIANAPOLIS, INDIANA EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2831 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: POLYVINYL CHLORIDE ROOFING REPORT HOLDER: IB ROOF SYSTEMS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: POLYVINYL CHLORIDE ROOFING REPORT HOLDER: IB ROOF SYSTEMS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 28 Reissued 02/2018 This report is subject to renewal 02/2019. DIVISION: 07 00 00

More information

ICC-ES Evaluation Report. ESR-3297 Reissued March 1, 2013 This report is subject to renewal May 1, 2014.

ICC-ES Evaluation Report. ESR-3297 Reissued March 1, 2013 This report is subject to renewal May 1, 2014. ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-3297 Reissued March, 203 This report is subject to renewal May, 204. A Subsidiary the International Code Council DIVISION: 07 00

More information

REPORT HOLDER: CARLISLE SYNTEC POST OFFICE BOX 7000 CARLISLE, PENNSYLVANIA EVALUATION SUBJECT:

REPORT HOLDER: CARLISLE SYNTEC POST OFFICE BOX 7000 CARLISLE, PENNSYLVANIA EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1184 Reissued 03/2017 This report is subject to renewal 03/2019. DIVISION: 07 00 00 THERMAL

More information

UL Evaluation Report UL ER Issued: December 19, 2014 Revised: August 14, UL Category Code: ULFB. CSI MasterFormat

UL Evaluation Report UL ER Issued: December 19, 2014 Revised: August 14, UL Category Code: ULFB. CSI MasterFormat UL Evaluation Report UL ER9516-02 Issued: December 19, 2014 Revised: August 14, 2015 Visit UL s On-Line Certifications Directory: www.ul.com/erdirectory for current status of Report. UL Category Code:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3909 Issued 07/2017 This report is subject to renewal 07/2018. DIVISION: 07 00 00

More information

ESR-1013 Reissued January 1, 2012 This report is subject to renewal in two years.

ESR-1013 Reissued January 1, 2012 This report is subject to renewal in two years. ICC-ES Evaluation Report ESR-1013 Reissued January 1, 2012 This report is subject to renewal in two years. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: COVESTRO, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: COVESTRO, LLC 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1221 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMOPLASTIC MEMBRANE ROOFING SECTION: POLYVINYL-CHLORIDE ROOFING

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMOPLASTIC MEMBRANE ROOFING SECTION: POLYVINYL-CHLORIDE ROOFING 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1456 Reissued 08/2018 This report is subject to renewal 08/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: NCFI POLYURETHANES EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: NCFI POLYURETHANES EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3392 Reissued 06/2018 This report is subject to renewal 06/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS REPORT HOLDER: METAL SALES MANUFACTURING CORPORATION

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS REPORT HOLDER: METAL SALES MANUFACTURING CORPORATION 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 3-6587 (562) 699-03 www.icc-es.org ESR-3743 Reissued 08/2017 This report is subject to renewal 08/2019. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: NCFI POLYURETHANES

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: NCFI POLYURETHANES 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3392 Reissued 06/2017 This report is subject to renewal 06/2018. DIVISION: 07 00

More information

PRODUCT CONTROL SECTION

PRODUCT CONTROL SECTION MIAMI-DADE COUNTY PRODUCT CONTROL SECTION 11805 SW 26 Street, Room 208 DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474 BOARD AND CODE ADMINISTRATION DIVISION T (786)315-2590

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS REPORT HOLDER: METAL SALES MANUFACTURING CORPORATION

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS REPORT HOLDER: METAL SALES MANUFACTURING CORPORATION 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (0) 3-87 (562) 699-03 www.icc-es.org ESR-23 Reissued 08/2017 This report is subject to renewal 08/2019. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOF PANELS REPORT HOLDER: ONDULINE NORTH AMERICA, INC. EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOF PANELS REPORT HOLDER: ONDULINE NORTH AMERICA, INC. EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1957 Reissued 06/2018 This report is subject to renewal 06/2019. DIVISION: 07 00

More information

ICC ES SYSTEM SYSTEM. Trusted DIVISION: 07 SECTION: AND FINISH REPORT HOLDER: ICC-ES Evaluation. Reissued 08/2016.

ICC ES SYSTEM SYSTEM. Trusted DIVISION: 07 SECTION: AND FINISH REPORT HOLDER: ICC-ES Evaluation. Reissued 08/2016. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 2562 Reissued 08/206 This report is subject to renewal 08/208. DIVISION: 07 00 00

More information

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: EVALUATION SUBJECT: STRUCTURAL PANELS

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: EVALUATION SUBJECT: STRUCTURAL PANELS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2182 Reissued 08/2018 This report is subject to renewal 06/2019. DIVISION: 06 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (562) 699 0543 www.icc es.org ESR 3152 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: EXTERIOR INSULATION AND FINISH SYSTEMS REPORT HOLDER: DRYVIT SYSTEMS, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: EXTERIOR INSULATION AND FINISH SYSTEMS REPORT HOLDER: DRYVIT SYSTEMS, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 232 Reissued 0/207 This report is subject to renewal 0/209. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: LAPOLLA INDUSTRIES, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: LAPOLLA INDUSTRIES, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3916 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 07 00

More information

REPORT HOLDER: FEROOF CO., LTD SEONWON LI SEONNAM MYEON SUNGJU GUN KYEONGSANGBUK DO SOUTH KOREA EVALUATION SUBJECT:

REPORT HOLDER: FEROOF CO., LTD SEONWON LI SEONNAM MYEON SUNGJU GUN KYEONGSANGBUK DO SOUTH KOREA EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3331 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE RUBBER SHAKES REPORT HOLDER: DAVINCI ROOFSCAPES, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE RUBBER SHAKES REPORT HOLDER: DAVINCI ROOFSCAPES, LLC 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2119 Reissued 08/2017 This report is subject to renewal 08/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: SPRAY FOAM POLYMERS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: SPRAY FOAM POLYMERS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3225 Reissued 08/2017 This report is subject to renewal 07/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: EXTERIOR INSULATION AND FINISH SYSTEMS REPORT HOLDER: PAREX USA, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: EXTERIOR INSULATION AND FINISH SYSTEMS REPORT HOLDER: PAREX USA, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2563 Reissued 03/17 This report is subject to renewal 03/19. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS REPORT HOLDER: PAREX USA, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS REPORT HOLDER: PAREX USA, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2045 Reissued 01/2017 This report is subject to renewal 01/2019. DIVISION: 07 00

More information

ESR-1365 Reissued March 2014 This report is subject to renewal April 1, 2015.

ESR-1365 Reissued March 2014 This report is subject to renewal April 1, 2015. ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1365 Reissued March 2014 This report is subject to renewal April 1, 2015. A Subsidiary of the International Code Council DIVISION:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS SECTION: AIR BARRIERS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS SECTION: AIR BARRIERS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1993 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00

More information

UL Evaluation Report UL ER Issued: June 29, 2015 Revised: July 29, UL Category Code: ULFB. CSI MasterFormat

UL Evaluation Report UL ER Issued: June 29, 2015 Revised: July 29, UL Category Code: ULFB. CSI MasterFormat UL Evaluation Report UL ER1306-01 Issued: June 29, 2015 Revised: July 29, 2015 Visit UL s On-Line Certifications Directory: www.ul.com/erdirectory for current status of Report. UL Category Code: ULFB CSI

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER: 0 Most idely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-687 (62) 699-043 www.icc-es.org ESR-199 Reissued 0/2017 This report is subject to renewal 0/2019. DIVISION: 07 00 00 THERMAL AND MOISTURE

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: BASF CORPORATION

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COATED FOAM ROOFING REPORT HOLDER: BASF CORPORATION 0 Most Widely ccepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2298 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC. 0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1143 Reissued 04/2017 This report is subject to renewal 04/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CLAY ROOF TILES REPORT HOLDER: BORAL ROOFING LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CLAY ROOF TILES REPORT HOLDER: BORAL ROOFING LLC 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 07 Reissued 0/207 This report is subject to renewal 2/207. DIVISION: 07 00 00 THERMAL

More information

REPORT HOLDER: UNITED DURALUME PRODUCTS, INC. EVALUATION SUBJECT: DURACOOL COMPOSITE STRUCTURAL INSULATED PANELS

REPORT HOLDER: UNITED DURALUME PRODUCTS, INC. EVALUATION SUBJECT: DURACOOL COMPOSITE STRUCTURAL INSULATED PANELS 0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org Most Widely Accepted and Trusted ESR 3779 Reissued 01/2017 Revised 10/2018 This report is subject to renewal 01/2019.

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: REFLECTIX INCORPORATED

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: REFLECTIX INCORPORATED 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1362 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL

More information

REPORT HOLDER: SOPREMA, INC. 310 QUADRAL DRIVE WADSWORTH, OHIO EVALUATION SUBJECT:

REPORT HOLDER: SOPREMA, INC. 310 QUADRAL DRIVE WADSWORTH, OHIO EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3966 Reissued 07/2017 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

REPORT HOLDER: RARE MANUFACTURING INC A AVENUE SURREY, BRITISH COLUMBIA V4N 4P2 CANADA EVALUATION SUBJECT: IRONWOOD SHAKE

REPORT HOLDER: RARE MANUFACTURING INC A AVENUE SURREY, BRITISH COLUMBIA V4N 4P2 CANADA EVALUATION SUBJECT: IRONWOOD SHAKE 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2134 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER: 0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 2717 Reissued 07/2015 This report is subject to renewal 07/2017. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CHEMICAL BROTHERS INTERNATIONAL, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CHEMICAL BROTHERS INTERNATIONAL, LLC 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3458 Reissued 11/2016 This report is subject to renewal 11/2017. DIVISION: 07 00

More information

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: SHOP-APPLIED WOOD COATINGS SECTION: SHEATHING REPORT HOLDER:

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: SHOP-APPLIED WOOD COATINGS SECTION: SHEATHING REPORT HOLDER: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1365 Reissued 04/2018 This report is subject to renewal 04/2020. DIVISION: 06 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CHEMICAL BROTHERS INTERNATIONAL, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CHEMICAL BROTHERS INTERNATIONAL, LLC 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3458 Reissued 11/2016 This report is subject to renewal 11/2017. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: ROOF PANELS REPORT HOLDER: ROSER CO., LTD.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: ROOF PANELS REPORT HOLDER: ROSER CO., LTD. 0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1763 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL

More information

REPORT HOLDER: BASF CORPORATION EVALUATION SUBJECT: MASTERSEAL AWB 660 I VAPOR RETARDER, AIR AND WATER-RESISTIVE BARRIER AND FLEXIBLE FLASHING

REPORT HOLDER: BASF CORPORATION EVALUATION SUBJECT: MASTERSEAL AWB 660 I VAPOR RETARDER, AIR AND WATER-RESISTIVE BARRIER AND FLEXIBLE FLASHING 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3310 Reissued 07/2018 This report is subject to renewal 07/2020. DIVISION: 07 00

More information

LEGACY REPORT DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FLUID APPLIED ROOFING REPORT HOLDER: CONKLIN COMPANY INC.

LEGACY REPORT DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FLUID APPLIED ROOFING REPORT HOLDER: CONKLIN COMPANY INC. 0 Most Widely Accepted and Trusted ICC ES Legacy Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ER 520 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: WATER-RESISTIVE BARRIERS/WEATHER BARRIERS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: WATER-RESISTIVE BARRIERS/WEATHER BARRIERS 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1504 Reissued 03/2017 This report is subject to renewal 03/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER: 0 ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org Most Widely Accepted and Trusted ESR-4099 Reissued 07/2018 Revised 08/2018 This report is subject to renewal 07/2019.

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: THE DOW CHEMICAL COMPANY

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: THE DOW CHEMICAL COMPANY 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2670 Reissued 07/2017 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER: POLYGLASS USA, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER: POLYGLASS USA, INC. 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2018 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD. 0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 1687 Reissued 02/2016 This report is subject to renewal 02/2017. DIVISION: 07 00 00 THERMAL

More information

REPORT HOLDER: PAREX USA, INC EAST LA PALMA AVENUE, SUITE 250 ANAHEIM, CALIFORNIA EVALUATION SUBJECT:

REPORT HOLDER: PAREX USA, INC EAST LA PALMA AVENUE, SUITE 250 ANAHEIM, CALIFORNIA EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 689 Reissued 07/206 This report is subject to renewal 07/208. DIVISION: 07 00 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER: DAP FOAM, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER: DAP FOAM, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3052 Reissued 11/2016 This report is subject to renewal 11/2018. DIVISION: 07 00

More information

REPORT HOLDER: STAR R FOAM MANUFACTURING, INC. EVALUATION SUBJECT: STAR R FOAM INSULATION BOARDS

REPORT HOLDER: STAR R FOAM MANUFACTURING, INC. EVALUATION SUBJECT: STAR R FOAM INSULATION BOARDS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1566 Reissued 07/2018 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

REPORT HOLDER: AEROSMITH FASTENING SYSTEMS 5621 DIVIDEND ROAD INDIANAPOLIS, INDIANA EVALUATION SUBJECT: AEROSMITH 3000 SERIES FASTENERS

REPORT HOLDER: AEROSMITH FASTENING SYSTEMS 5621 DIVIDEND ROAD INDIANAPOLIS, INDIANA EVALUATION SUBJECT: AEROSMITH 3000 SERIES FASTENERS 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3833 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 03 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION DIVISION: AIR BARRIERS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION DIVISION: AIR BARRIERS REPORT HOLDER: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2717 Reissued 07/2017 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

REPORT HOLDER: R.L. ADAMS PLASTICS, INC CROSSROADS COMMERCE PARKWAY WYOMING, MICHIGAN EVALUATION SUBJECT: POLYCORE BRAND INSULATION

REPORT HOLDER: R.L. ADAMS PLASTICS, INC CROSSROADS COMMERCE PARKWAY WYOMING, MICHIGAN EVALUATION SUBJECT: POLYCORE BRAND INSULATION 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3914 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: FOUR SEASONS BUILDING PRODUCTS, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: FOUR SEASONS BUILDING PRODUCTS, LLC 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2229 Reissued 05/2018 This report is subject to renewal 05/2019. DIVISION: 07 00

More information

UL Evaluation Report UL ER Issued: December 9, Revised: September 29, UL Category Code: ULFB. CSI MasterFormat

UL Evaluation Report UL ER Issued: December 9, Revised: September 29, UL Category Code: ULFB. CSI MasterFormat UL Evaluation Report UL ER9516-01 Issued: December 9, 2013 Revised: September 29, 2017 Visit UL s On-Line Certifications Directory: www.ul.com/erdirectory for current status of Report. UL Category Code:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: FUNDERMAX GMBH

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: FUNDERMAX GMBH 0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3340 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: RHINO LININGS CORPORATION

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: RHINO LININGS CORPORATION 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2100 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL WALL PANELS REPORT HOLDER: METL SPAN, A DIVISION OF NCI GROUP, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL WALL PANELS REPORT HOLDER: METL SPAN, A DIVISION OF NCI GROUP, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2218 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00

More information

REPORT HOLDER: GEORGIA PACIFIC GYPSUM LLC 2861 MILLER ROAD DECATUR, GEORGIA EVALUATION SUBJECT: DENSELEMENT BARRIER SYSTEM

REPORT HOLDER: GEORGIA PACIFIC GYPSUM LLC 2861 MILLER ROAD DECATUR, GEORGIA EVALUATION SUBJECT: DENSELEMENT BARRIER SYSTEM 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3786 Reissued 11/2017 This report is subject to renewal 11/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING FELT AND UNDERLAYMENT REPORT HOLDER: ENVIRONMENTALLY SAFE PRODUCTS, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING FELT AND UNDERLAYMENT REPORT HOLDER: ENVIRONMENTALLY SAFE PRODUCTS, INC. 0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-3652 Issued 09/2015 This report is subject to renewal 09/2016. SECTION: 07 30 05 ROOFING FELT

More information

UL Evaluation Report UL ER Issued: July 25, UL Category Code: ULFB. CSI MasterFormat

UL Evaluation Report UL ER Issued: July 25, UL Category Code: ULFB. CSI MasterFormat UL Evaluation Report UL ER10167-01 Issued: July 25, 2014 Visit UL s On-Line Certifications Directory: www.ul.com/erdirectory for current status of Report. UL Category Code: ULFB CSI MasterFormat DIVISION:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: NATURAL POLYMERS, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: NATURAL POLYMERS, LLC 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3136 Reissued 06/2017 This report is subject to renewal 06/2018. DIVISION: 07 00

More information

ESR-1794* Reissued September 1, 2012 This report is subject to renewal November 1, 2014.

ESR-1794* Reissued September 1, 2012 This report is subject to renewal November 1, 2014. ICC-ES Evaluation Report www.icc-es.org (800) 4-6587 (56) 699-054 ESR-794* Reissued September, 0 This report is subject to renewal November, 04. A Subsidiary of the International Code Council DIVISION:

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2600 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PARKLEX USA

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PARKLEX USA 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3462 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER CEMENT SIDING REPORT HOLDER: KMEW CO., LTD. EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER CEMENT SIDING REPORT HOLDER: KMEW CO., LTD. EVALUATION SUBJECT: 0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org Most Widely Accepted and Trusted ESR 1627 Reissued 12/2018 This report is subject to renewal 12/2020. DIVISION: 07 00

More information

NEMO etc. Certificate of Authorization # Christian Street, Unit #13 Oxford, CT (203)

NEMO etc. Certificate of Authorization # Christian Street, Unit #13 Oxford, CT (203) Certificate of Authorization #32455 353 Christian Street, Unit #13 Oxford, CT 06478 (203) 262-9245 ENGINEER EVALUATE TEST CONSULT CERTIFY Firestone Building Products Company, LLC. 200 4 th Avenue South

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER CEMENT SIDING REPORT HOLDER: RIEDER FASERBETON ELEMENTE GmbH

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIBER CEMENT SIDING REPORT HOLDER: RIEDER FASERBETON ELEMENTE GmbH 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2810 Reissued 02/2018 This report is subject to renewal 07/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF TILES REPORT HOLDER: GERARD ROOFING TECHNOLOGIES EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF TILES REPORT HOLDER: GERARD ROOFING TECHNOLOGIES EVALUATION SUBJECT: 0 ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org Most Widely Accepted and Trusted ESR-1188 Reissued 05/2018 Revised 08/2018 This report is subject to renewal 05/2019.

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL SHINGLES REPORT HOLDER: TEFUTE BUILDING MATERIALS COMPANY, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL SHINGLES REPORT HOLDER: TEFUTE BUILDING MATERIALS COMPANY, LLC 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 4036 Reissued 05/2018 This report is subject to renewal 05/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE SECTION: THERMAL INSULATION REPORT HOLDER: CERTAINTEED CORPORATION

DIVISION: THERMAL AND MOISTURE SECTION: THERMAL INSULATION REPORT HOLDER: CERTAINTEED CORPORATION 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2668 Reissued 11/2017 This report is subject to renewal 11/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL WALL PANELS REPORT HOLDER: FCP, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL WALL PANELS REPORT HOLDER: FCP, INC. 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2937 Reissued 05/2016 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: FOUR SEASONS SOLAR PRODUCTS

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: FOUR SEASONS SOLAR PRODUCTS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2445 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 06 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 4073 Issued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00 00

More information

REPORT HOLDER: AEROSMITH FASTENING SYSTEMS 5621 DIVIDEND ROAD INDIANAPOLIS, INDIANA EVALUATION SUBJECT: AEROSMITH 5000 SERIES FASTENERS

REPORT HOLDER: AEROSMITH FASTENING SYSTEMS 5621 DIVIDEND ROAD INDIANAPOLIS, INDIANA EVALUATION SUBJECT: AEROSMITH 5000 SERIES FASTENERS 0 ICC-ES Report ICC-ES (800) 42-6587 (562) 699-054 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-45 Reissued 06/206 This report is subject to renewal 06/207 DIVISION: 0 00 00CONCRETE SECTION:

More information

REPORT HOLDER: OMEGA PRODUCTS INTERNATIONAL, INC CALIFORNIA AVENUE CORONA, CALIFORNIA EVALUATION SUBJECT:

REPORT HOLDER: OMEGA PRODUCTS INTERNATIONAL, INC CALIFORNIA AVENUE CORONA, CALIFORNIA EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (00) 423-657 (562) 699-0543 www.icc-es.org ESR-2064 Reissued 11/2017 This report is subject to renewal 11/201. DIVISION: 07 00 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: ARCONIC ARCHITECTURAL PRODUCTS, LLC

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: ARCONIC ARCHITECTURAL PRODUCTS, LLC 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3435 Reissued 07/2017 This report is subject to renewal 07/2018. DIVISION: 07 00

More information

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: ENERCEPT, INC.

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: ENERCEPT, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1780 Reissued 11/2017 This report is subject to renewal 11/2019. DIVISION: 06 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CERTAINTEED CORPORATION

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: CERTAINTEED CORPORATION 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2668 Reissued 11/2017 This report is subject to renewal 11/2018. DIVISION: 07 00

More information

ESR-2894 Reissued April 2014 This report is subject to renewal April 1, 2016.

ESR-2894 Reissued April 2014 This report is subject to renewal April 1, 2016. ICC-ES Evaluation Report ESR-894 Reissued April 04 This report is subject to renewal April, 0. www.icc-es.org (800) 4-87 () 99-04 A Subsidiary of the International Code Council DIVISION: 07 00 00 THERMAL

More information

DIVISION: CONCRETE SECTION: CEMENTITIOUS WOOD FIBER DECKS DIVISION: FINISHES SECTION: ACOUSTIC ROOM COMPONENTS

DIVISION: CONCRETE SECTION: CEMENTITIOUS WOOD FIBER DECKS DIVISION: FINISHES SECTION: ACOUSTIC ROOM COMPONENTS 0 ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org Most Widely Accepted and Trusted ESR-1112 Reissued 05/2017 Revised 08/2018 This report is subject to renewal 05/2019.

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIRESTOPPING REPORT HOLDER: PASSIVE FIRE PROTECTION PARTNERS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: FIRESTOPPING REPORT HOLDER: PASSIVE FIRE PROTECTION PARTNERS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2996 Reissued 12/2017 This report is subject to renewal 12/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CONCRETE ROOF TILES REPORT HOLDER: BARTILE ROOFS, INC. EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CONCRETE ROOF TILES REPORT HOLDER: BARTILE ROOFS, INC. EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2778 Reissued 07/2018 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3470 Reissued 03/2018 This report is subject to renewal 03/2019. DIVISION: 07 00

More information

REPORT HOLDER: LOUISIANA-PACIFIC CORPORATION 414 UNION STREET, SUITE 2000 NASHVILLE, TENNESSEE EVALUATION SUBJECT:

REPORT HOLDER: LOUISIANA-PACIFIC CORPORATION 414 UNION STREET, SUITE 2000 NASHVILLE, TENNESSEE EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (00) 423-657 (562) 699-0543 www.icc-es.org ESR-3090 Issued 06/2017 This report is subject to renewal 06/2019. DIVISION: 06 00 00 WOOD, PLASTICS

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PRODEMA USA INC. EVALUATION SUBJECT:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PRODEMA USA INC. EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3439 Reissued 07/2018 This report is subject to renewal 07/2019. DIVISION: 07 00

More information

DIVISION: CONCRETE SECTION: SPECIALTY PLACED CONCRETE REPORT HOLDER: EMMEDUE S.P.A.

DIVISION: CONCRETE SECTION: SPECIALTY PLACED CONCRETE REPORT HOLDER: EMMEDUE S.P.A. 0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2037 Reissued 07/2016 This report is subject to renewal 07/2018. DIVISION: 03 00 00 CONCRETE

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: DERBY BUILDING PRODUCTS INCORPORATED

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: DERBY BUILDING PRODUCTS INCORPORATED 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2888 Reissued 07/2017 This report is subject to renewal 07/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER: THE GARLAND COMPANY, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: MODIFIED BITUMINOUS SHEET ROOFING REPORT HOLDER: THE GARLAND COMPANY, INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 460 Reissued 02/2018 This report is subject to renewal 02/2019. DIVISION: 07 00 00

More information

POLYISO Polyisocyanurate Roofing Insulation

POLYISO Polyisocyanurate Roofing Insulation POLYISO Polyisocyanurate Roofing Insulation TM Above all. WHEN YOU NEED A GO-TO PRODUCT, STOP RIGHT HERE Polyiso is one of the most effective and economical insulation products in the roofing industry.

More information

REPORT HOLDER: COREV AMERICA BRITTMOORE PARK DRIVE HOUSTON, TEXAS EVALUATION SUBJECT:

REPORT HOLDER: COREV AMERICA BRITTMOORE PARK DRIVE HOUSTON, TEXAS EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2000 Reissued 02/2017 This report is subject to renewal 02/2019. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC. 0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2600 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00 00 THERMAL

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: KP BUILDING PRODUCTS

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: KP BUILDING PRODUCTS 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1517 Reissued 11/2016 This report is subject to renewal 11/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: ICYNENE, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: ICYNENE, INC. 0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 3500 Reissued 01/2016 This report is subject to renewal 01/2017. DIVISION: 07 00 00 THERMAL

More information

DIVISION: FINISHES SECTION: GYPSUM BOARD REPORT HOLDER: PANEL REY, S.A.

DIVISION: FINISHES SECTION: GYPSUM BOARD REPORT HOLDER: PANEL REY, S.A. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3831 Reissued 12/2017 This report is subject to renewal 12/2018. SECTION: 09 29 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: BASF CORPORATION (RIGID PU SYSTEMS)

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: BASF CORPORATION (RIGID PU SYSTEMS) 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3662 Reissued 05/2017 This report is subject to renewal 02/2019. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: GENTEK BUILDING PRODUCTS, INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: PLASTIC SIDING REPORT HOLDER: GENTEK BUILDING PRODUCTS, INC. 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (00) 423-657 (562) 699-0543 www.icc-es.org ESR-1133 Reissued 11/2017 This report is subject to renewal 11/201. DIVISION: 07 00 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CLAY ROOF TILES REPORT HOLDER: CERAMICA LA ESCANDELLA, S.A.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: CLAY ROOF TILES REPORT HOLDER: CERAMICA LA ESCANDELLA, S.A. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2727 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC. 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1172 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00

More information