Steel Octagon Boxes & Ceiling Pans
|
|
|
- Ira Carter
- 6 years ago
- Views:
Transcription
1 3 1 /4" ROUND CEILING PAN 4.0 CUBIC INCH CAPACITY 1 /2" DEEP CLAMPS IN BOTTOM TP266 Cat. # Cable Conduit Unit Qty. Wt. Lbs. Per 100 TP266 4 Cable 1 1 /2" /4" OCTAGON OUTLET BOXES 9.0 CUBIC INCH CAPACITY TP256 TP258 TP259 TP260 TP264 TP /2" 1 1 /2" 41 TP258 Extension Ring 4 1 /2" 31 FOR NONMETALLIC CABLE WITH CLAMPS TP259 "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" 53 TP260 4 Cable, 2 1 /2" 1 1 /2" 44 TP264 Two Screw Ears 4 Cable, 2 1 /2" 1 1 /2" 47 Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs. for fixture/luminaire. Not suitable for fans. 3 1 /4" ROUND CEILING COVERS TP270 TP272 Cat. # Cable Unit Qty. Wt. Lbs. Per 100 TP270 Flat Blank TP272 Flat, 1 /2" KO in Center US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business 335
2 4" ROUND CEILING PANS* 6.0 CUBIC INCH CAPACITY 1 /2" DEEP TP269 TP269 KOs Only 5 1 /2" 35 TP267 KOs and Clamps 4 Cable, 3 1 /2" 39 *Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture. Not suitable for fans. TP267 4" OCTAGON OUTLET BOXES 15.5 CUBIC INCH CAPACITY TP274, TP278, TP276 TP273 TP280 TP282 TP284, TP286 TP834* TP /2" 5 1 /2" TP273 Blank Bottom 4 1 /2" 51 TP /4" 3 1 /2", 2 3 /4" TP /2", 2 3 /4" 3 1 /2", 2 3 /4" TP280 "C" Bracket 4 1 /2" 5 1 /2" 60 TP282 "S" Bracket, Set 1 /2" 3 1 /2" 5 1 /2" 58 Air Plenum TP834* For Air Plenum 4 1 /2" 5 1 /2" 52 OCTAGON EXTENSION RINGS (SLOT & KEY PERMIT MOUNTING WITHOUT REMOVING BOX SCREWS) TP /2" 36 TP /2", 2 3 /4" 36 *For Air Plenum (No Mounting Holes) - Not UL Listed. Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture/luminaire. Not suitable for fans. CSA Certified US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business
3 4" OCTAGON OUTLET BOXES 15.5 CUBIC INCH CAPACITY FOR ARMORED & METAL CLAD (MCI) CABLE CLAMPS IN EACH END TP310 TP312 TP314 TP310* 4 Cable, 2 1 /2" 1 1 /2" 57 TP312* "C" Bracket 4 Cable, 2 1 /2" 1 1 /2" 66 TP314* "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" 64 *UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP ) MCAP is a registered trademark of Southwire Company. Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture/luminaire. Not suitable for fans 4" OCTAGON OUTLET BOXES 15.5 CUBIC INCH CAPACITY FOR NONMETALLIC CABLE WITH CLAMPS TP298 TP300 TP302 TP304 TP306 TP308 TP298 4 Cable, 2 1 /2" 1 1 /2" 56 TP300 With Side Nail Holes 4 Cable, 2 1 /2" 1 1 /2" 55 TP302 "C" Bracket 4 Cable, 2 1 /2" 1 1 /2" 65 TP304 "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" 64 TP306 Two Screw Ears 4 Cable, 2 1 /2" 1 1 /2" 58 TP308 "F" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" 64 Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture/luminaire. Not suitable for fans US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business 337
4 4" OCTAGON OUTLET BOXES 21.5 CUBIC INCH CAPACITY 2 1 /8" DEEP TP288, TP290, TP294 TP292, TP838* TP292RED TP339 4" OCTAGON OUTLET BOXES 21.5 CUBIC INCH CAPACITY 2 1 /8" DEEP WITH CABLE CLAMPS TP /2" 3 1 /2", 2 3 /4" TP288PF 4 1 /2" 3 1 /2", 2 3 /4" TP /4" 3 1 /2", 2 3 /4" TP290PF 4 3 /4" 3 1 /2", 2 3 /4" TP /2", 2 3 /4" 3 1 /2", 2 3 /4" TP292PF 2 1 /2", 2 3 /4" 3 1 /2", 2 3 /4" TP292RED 2 1 /2", 2 3 /4" 3 1 /2", 2 3 /4" TP " 3 1 /2", 2 3 /4" TP339 Blank Bottom 4 1 /2" Air Plenum TP838* Plenum 2 1 /2", 2 3 /4" 3 1 /2", 2 3 /4" *For Air Plenum (No Mounting Holes) - Not UL Listed TP catalog numbers ending in PF includes ground screw with pigtail lead Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture/luminaire. Not suitable for fans TP316 TP318 TP320 TP317 TP338 FOR NONMETALLIC CABLE TP316 4 Cable, 2 1 /2" 1 1 /2" TP318 "C" Bracket 4 Cable, 2 1 /2" 1 1 /2" TP320 "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" FOR ARMORED & METAL CLAD (MCI) CABLE-CLAMPS IN EACH END TP317* 4 Cable, 2 1 /2" 1 1 /2" TP338* "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" TP338PF "S" Bracket, Set 1 /2" 4 Cable, 1 1 /2" 1 1 /2" *UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP ) MCAP is a registered trademark of Southwire Company. TP catalog numbers ending in PF includes ground screw with pigtail lead Weight limit for 3 1 /4" and 4" octagon outlet boxes and ceiling pans is lbs for fixture/luminaire. Not suitable for fans US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business
5 Steel Octagon Covers & Accessories 4" OCTAGON BOX AND ADJUSTABLE BAR SETS 15.5 CUBIC INCH CAPACITY BOX SETS Weight Limits: 35 lbs. at 16", 15 lbs. at 24" TP372 TP377 TP367 Cat. # Stud Spacing Stud Unit Qty. Wt. Lbs. Per 100 TP372* 16" 24" Yes FOR NONMETALLIC CABLE WITH CLAMPS TP377 16" 24" FOR ARMORED & METAL CLAD (MCI) CABLE CLAMPS IN EACH END TP367 16" 24" TP367PF 16" 24" *4" Octagon Box and Adjustable Bar Sets have 1 /2" KOs for conduit TP catalog numbers ending in PF includes ground screw with pigtail lead ADJUSTABLE BAR HANGERS Features: Holding prong holds box in place for nailing Design resists bending and twisting Locking tabs to hold bar in position Weight Limits: lbs. at 16"; 21 lbs. at 24" TP356 Cat. # Stud Spacing Length Stud Unit Qty. Wt. Lbs. Per 100 TP356 16" & 24" 14" 1 /2" 41 US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business 339
6 qxp 12/16/2013 4:23 PM Page 340 Steel Octagon Covers & Accessories 4" OCTAGON BOX COVERS CUBIC CAPACITY (SEE BELOW) TP3 TP853* TP323 TP326, TP331, TP332, TP333 TP328 TP329 TP335 TP334 TP336 TP330 Cat. # Description Capacity Cu. In. Unit Qty. Wt. Lbs. Per 100 TP3 TP3RED TP323 TP333 TP332 TP326 TP331 TP328 TP330 TP329 TP335 TP334 TP336 Flat Blank Octagon Shape Flat Blank Octagon Shape Flat Blank Round Shape Raised 1", Open With Ears 23/ 4" Raised 1/ 2", Open With Ears 23/ 4" Raised 5/ 8", Open With Ears 23/ 4" Raised 3/ 4", Open With Ears 23/ 4" Flat With 1/ 2" KO Octagon Shape Raised 5/ 8", With 1/ 2" KO Flat With 1/ 2" KO Round Shape Flat, For Toggle Switch Flat, Single Receptacle 113/ 32" Flat, For Duplex Receptacle Flat, Blank With PVC Gasket 24 Air Plenum TP853* *For Air Plenum (No Mounting Holes) CSA Certified Not UL Listed FLEXIBLE FIXTURE HANGERS Standard Materials and Finishes: Eaton's Crouse-Hinds TPRFH flexible fixture hangers are used in commercial or light industrial applications where HID high bay and low bay lighting fixtures are used. Specific applications include storage facilities, shipping warehouses, retail and DIY facilities. Material: Sheet Steel Finish: Zinc Chromate for corrosion resistance Features and Benefits: Suitable for use with 1/2" or 3/4" fixture conduit stems these hangers allow the conduit stem of the fixture (luminaire) to swing in any direction. Maximum swing angle is 26 from vertical max slope angles 1/2 Available for attachment to round or octagonal steel boxes. Quickly and easily attached by two screws. Hangers are drilled and tapped for use with 3/4" conduit stem as standard and come supplied with a 3/4" 1/2" reducer for 1/2" conduit stem applications. Description Support Wt. (lbs) Cat. # For use with 4" Round or Octagon Boxes Certifications and Compliances: UL Listed UL 1598 CSA C.2 No. 2 Suitable for Damp Locations US: CAN: Copyright 2013 Eaton s Crouse-Hinds Business TPRFH12
UL Listed TP408. KNOCKOUTS Cat. # Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100
" SQUAR OUTLT BOXS AND COVRS Features: Applications: For use with conduit Available in red for fire alarm applications Ideal for exposed work applications, providing an easy method for the installation
`bfifkd=c^k=prmmloq=molar`qp
`bfifkd=c^k=prmmloq=molar`qp A9 Application The RACO 7120, and 7120-1 are premium boxes for rugged new work, old work ceiling fan and fixture installations The 7120, and 7120-1 are made of heavy-duty engineered
Overview Steel City. Metallic Boxes and Covers. Advantages of Steel City. Boxes and Covers. Boxes & Covers Steel City Metallic Boxes
Steel City Metallic Boxes and Covers Steel City is the industry-leading product line of metallic switch and outlet boxes used in electrical construction. Since 1904, Steel City products have symbolized
STEEL BOXES & COVERS
STEEL BOXES & COVERS Table of Contents Fan Support Boxes.............4-6 4" Square Boxes, Covers & Extensions.................6-17 Steel Boxes and Covers 4" Octagon Boxes, Covers & Extensions................
SECTION OUTLET, PULL, AND JUNCTION BOXES
SECTION 16131 OUTLET, PULL, AND JUNCTION BOXES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09900 - Painting. 2. 16112 - Raceways and Conduits. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
6" Surface LED Downlight, 120V, 80CRI, 4000K, White, Junction. Box Mount Only
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 SLD606840WHJB 6" Led SRF MNT 40K Catalog Number Manufacturer Description Weight per unit Product Category Features amperage
8461C 4SQ, 1"RSD Rndopnw/Ers CVR
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 4SQ, 1"RSD Rndopnw/Ers CVR Appleton/Oz Gedney Catalog Number Manufacturer Appleton/Oz Gedney Description Steel Square
Commercial products. PRE-formance Giving you the convenience of a pre-fabricated product - plus the flexibility to accommodate job site requirements
Commercial products PRE-formance Giving you the convenience of a pre-fabricated product - plus the flexibility to accommodate job site requirements PRE-formance Giving you the convenience of a pre-fabricated
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels. Threaded stud and
1496-1497.qxp 12/16/2013 8:44 PM Page 1497 Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs
4CS12 4CS-1/2 4X1-7/8D Handybox. Features. Dimensions and Weight. Long Description. Catalog Number
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 4CS12 4CS-1/2 4X1-7/8D Handybox Appleton/Oz Gedney Catalog Number 4CS12 Manufacturer Appleton/Oz
(3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (8) 1 INCH CONDUIT SIDES Box
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 4SD1 4S Box 1"Ko 2-1/8DP Appleton/Oz Gedney Catalog Number 4SD1 Manufacturer Appleton/Oz Gedney Description Steel Square
3500K 4000K 2700K HALO CRI CRI. SLD 600 Series SLD6068xxWH. SLD6069xxWH. 80CRI 2700K, 3000K, 3500K, and 4000K 90CRI 90CRI. 6 Surface LED Downlight
DESCRIPTION The Halo Surface Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6
D E S C R I P T I O N
DESPTION The Halo Surface Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6 is
1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED
LB57 1-1/2 LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category LB57 Appleton/Oz Gedney Conduit Body, Electro Zinc Plated Dichromate Epoxy Powder Coated
SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
Steel Square Box, Height 4 Inch; Width 4 Inch; Depth 1-1/2 Inch; Capacity 21 Cu Inch; 17 Knockout(S); Knockout Location (5) Bottom, (12) Side
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Knockout Location Knockout Size 4SSPLDR
BOXES COVERS ACCESSORIES WALLPLATES FITTINGS
BOXES COVERS ACCESSORIES WALLPLATES FITTINGS TABLE OF CONTENTS I-III GENERAL INFORMATION General Information... 2 Electrical Code Requirements...3-4 A METAL BOXES, COVERS AND ACCESSORIES Device Boxes...
Capacity of Steel Boxes and Covers
Capacity of Steel Boxes and Covers 314.16 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for
TW Series THRU-WALL BARRIER Cable/Conduit Sealing Device
TW Series THRU-WALL BARRIER Applications: THRU-WALL BARRIER cable/conduit sealing device is used wherever there is a need to seal cables or conduits penetrating fireor non-fire-rated walls, ceilings, floors,
Durable, Dependable and Adaptable. Our complete line of patented support boxes and braces are quick and easy to install.
Durable, Dependable and Adaptable Our complete line of patented support boxes and braces are quick and easy to install. Solid support, Quality materials, Great value. Contractors and homeowners trust sturdy
Mogul Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
Applications To provide access to large and heavy conductors for pulling, splicing, maintenance and future changes / upgrades Allows connection of straight conduit runs, branch conduit runs and 90 bends.
Wall studs. Wall Studs
15 Box To Stud Fastener Attaches with screws to metal studs. BB1 supports electrical box. BG series features Guide-Rite design. BP series features push-type design. 78101118145 BB1 Electrical Box 100 Support
Ruff-IN pre-fab systems
Fasteners RUFFIN-17 B-LINE SERIES Ruff-IN pre-fab systems Telescoping brackets Completely adjustable, fits a range of stud spacing Mounts 1 1 2", 2 1 8", 2 1 2", and 2 13 16" deep boxes Increased rigidity
CERTIFICATE OF COMPLIANCE
UL CERTIFICATE CERTIFICATE OF COMPLIANCE Certificate Number 20160606-E472978 Report Reference E472978-20160217 Issue Date 2016-JUNE-06 Issued to: Blue Point Fasteners 14728 Yorba CT Chino, CA 91710 This
2. Fittings shall be threaded and finished similar to conduit. Threadless fittings shall not be used.
SECTION 16110 RACEWAYS AND FITTINGS 1.00 RACEWAYS: All wiring shall be in raceways. Raceways shall be run in slabs, walls, above ceilings or exposed as indicated on drawings. Acceptable raceway and their
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic
SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 26 05 33 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes conduit and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and handholes.
Red Dot. Rigid Fittings. Table of Contents
Table of Contents Conduit Unions Hazardous Locations... C2 C3 Conduit Fittings Hazardous Locations... C4 C5 Sealing Fittings Hazardous Locations... C6 C7 Conduit Hubs Raintight for Threaded Rigid Conduits...
Big 52 cubic inch capacity. S3-52-W 3 Gang Old Work Box shown with Divider Plate, LVDIV-1
Quick/Click feature secures devices quickly and easily. Does not strip when over-torqued. See Page P-14 for details. 4 Auto/Clamps on each end eliminate the need for separate cable clamps. See Page P-14
Type 4X Panel Enclosures
Type 4 Panel Enclosures Type 4 Double-Door Floor-Standing Data Sheet and Catalog Number Finish Doors and sides of body have a smooth #4 brushed finish Accessories Panels Leg stabilizer kit See Accessories
Flextray - Accessories
Flextray - 40 Flextray - Protects cable from debris and dust Adds security to cable installation Easy bend-over tabs secure cover to trays Available for 2 (50mm) to 24 (600mm) wide trays Comes in 118 (2997mm)
Boxes and Covers. Table of Contents
MD Boxes and Covers Table of Contents Major Types of Electrical Boxes...A2 How to Select the Right Box...A3 Catalogue Number Designation... A4 A7 Device Boxes Available Models...A8 Other types of Boxes
High speed hanger solutions for Lighting & other Electrical services
High speed hanger solutions for Lighting & other Electrical services No Tools Required SELF-LOCKING 6 times faster Gripple History Since its launch in 1997, the Gripple hanger system has become universally
MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS
DAIMLERCHRYSLER MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS ISSUE DATE: 5/1/90 EFFECTIVE DATE: 2/4/92 REVIEW DATE:
REA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
Major Types of Electical Boxes
Major Types of Electical Boxes There are 10 major types of Electrical Boxes used in Canada. All these types of boxes serve specific purposes and are offered with various features / char ac ter is tics.
1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
Flush Service Floor Boxes
Flush Service Floor Boxes PRODUCT SPECIFICATION: Flush Service Floor Boxes PART 1: Overview Considerations when writing specifications: Floor boxes are manufactured in various sizes, configurations and
VMV High Wattage Series W For Medium and High Mounting Heights
VMV High Wattage Series 200-400W For Medium and High Mounting Heights Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
ELECTRICAL SECTION 2
ELECTRICAL SECTION 2 COMMON WORK RESULTS FOR ELECTRICAL PART 1 - GENERAL 1.1 GENERAL REQUIREMENTS A. This Section includes raceways, conductors and cables, grounding materials, boxes, electrical identification
Cable Terminators COMMERCIAL AND INDUSTRIAL FITTINGS: RIGID AND IMC CONDUIT FITTINGS. Applications
Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Terminator The Terminator body is deep enough to provide an ample compound chamber
Switch Rack Assemblies
Switch Rack Assemblies Applications: Free-standing switch rack assemblies are used: To provide a complete motor control center in one integrated package Outdoors and indoors In damp, wet or corrosive locations
Carlon. Non-Metallic Switch, Outlet and Ceiling Boxes. Blue PVC Boxes. PVC Boxes. Black Polycarbonate Boxes Vapor Barrier PC Boxes Ceiling Boxes
Carlon Non-Metallic Switch, Outlet and Ceiling Boxes Blue PVC Boxes PVC Boxes Black Polycarbonate Boxes Vapor Barrier PC Boxes Ceiling Boxes Brown Phenolic Boxes Orange Low Voltage Structured Cable Management
SECTION RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 26 05 33 - RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.01 WORK INCLUDED A. Raceways: 1. Wireways. B. Conduit: 1. Rigid metal conduit and fittings. (RGS) 2. Electrical metallic
Raceway and Boxes for Electrical Systems Page 1 of 7
Last Update: May 12, 2017 A. Conduits: Page 1 of 7 1. All conductors for each and every electrical system shall be installed in a raceway except communications and A/V systems which shall have stubs to
NORTHWESTERN UNIVERSITY PROJECT NAME JOB #
SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Technical Specifications
ST007-005 Lighting for Public Safety College Of Staten Island Technical Specifications (Issued for Bid) April 19, 2010 SUBMITTED BY: W-engineering, P.C. 240 W. 35 th Street, Suite 302 New York, NY 10001
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
Optics Mounting Lamping Finish Voltage Options. T6 Metal Halide* H039T6 1 39wT6 H070T6 2 70wT6. H w H070 70w H w
Quadro Project: Type: Qty: QD _ Series Optics Mounting Lamping Finish Voltage _ Option Pole Series Height Finish Options Series QD Quadro Optics Mounting Lamping Finish Voltage Options MA Type III MTR
FORM HEADWALL. FORM HEADWALL (floor mount) (floor mount) Installation Manual
FORM HEADWALL (floor mount) Installation Manual FORM HEADWALL (floor mount) OVERVIEW The Form is a UL-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated
1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092216 - NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
The RFB11 and RFB9 Series Floor
RFB11 & RFB9 Recessed Floor Box Series Large Capacity Floor Boxes for Power, Communication, Audio, and Video Applications Protection from water, dirt, and debris. The RFB11 and RFB9 Series Floor Boxes
SECTION LIGHTING. A. Section Basic Electrical Materials and Methods
SECTION 16500 LIGHTING PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide lighting fixtures of sizes, types and ratings as indicated; complete with, but not necessarily limited to, housings, lamps, lamp holders,
OVERHEAD SERVICES - SECONDARY
OVERHEAD SERVICES - SECONDARY Contents - Overhead Services... O-1 General Requirements for Overhead Service... O-2 Names of Parts for Overhead Service... O-3 Service Attachment on an Unguyed Service Mast...
SERIES 6LCD79V-NF Low Voltage LED Downlight for Remote Driver
APPLICATION Low voltage LED lighting fixtures using remote driver platforms are ideally suited to applications that require easy access to LED drivers for routine maintenance and improved LED life and
BRCJ SPRG Cable Support. Material, Color, and Finish. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com BRCJ SPRG Cable Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description
Project: Type: Qty: Optics. Series. Reflector Mounting Lamping Finish Voltage Options BLC - S BLC-L 21 1 /4" 36 1 /4" 3 1 /2" O.D.
Project: Type: Qty: Series Optics Mounting Lamping Finish Voltage Options Pole Series Finish Pole Options Series Optics Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged
INSTALLATION MANUAL. FOOTWALL/SINKWALL (floor mount)
INSTALLATION MANUAL FOOTWALL/SINKWALL (floor mount) OVERVIEW The Form is a UL-listed configurable footwall/sinkwall system. This system can include any combination of base cabinets, upper cabinets, wardrobes,
FORM HEADWALL. FORM HEADWALL (floating) (floating) Installation Manual
FORM HEADWALL (floating) Installation Manual FORM HEADWALL (floating) OVERVIEW The Form is a UL-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated
Carlon Flex-Plus Blue Electrical Nonmetallic Tubing (ENT) and Accessories
Carlon Flex-Plus Blue Electrical Nonmetallic Tubing (ENT) and Accessories ENT Tubing Adapters & Couplings Mud Box Assemblies Stub Downs Outlet and Switch Boxes Table of Contents Contents Carlon Flex-Plus
Quick-release pins swing the rack open from left to right to simplify installing and maintaining your equipment.
RM070A-R3 RM080A-R3 Wallmount Frame User s Manual Quick-release pins swing the rack open from left to right to simplify installing and maintaining your equipment. Customer Support Information Order toll-free
SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS. 1. Hangers and supports for electrical equipment and systems.
SECTION 26 05 29 HANGERS AND SUPPORTS FOR PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Hangers and supports for electrical equipment and systems. 1.2 DEFINITIONS A. EMT: Electrical
1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
CATALOG. Carlon Non-metallic boxes
CATALOG Carlon Non-metallic boxes Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth
SECTION RACEWAYS
SECTION 16110 RACEWAYS PART 1 GENERAL 1.1 SYSTEM DESCRIPTION A. Provide a complete raceway system suitable for receiving wire and cable and continuous from outlet to outlet. System shall be complete with
Fig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
SECTION GROUNDING
SECTION 16450 GROUNDING PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies general grounding and bonding requirements of electrical and telecommunication installations for personnel safety, equipment
Myers Hubs. Applications: Features: Standard Materials: Certifications and Compliances: Standard Finishes: Options: Conduit Hubs.
pplications: Features: Certifications and Compliances: Standard Materials: Standard Finishes: Options: Description Suffix CP 56 www.crouse-hinds.com US: 1-866-764-5454 CN: 1-800-265-0502 Copyright 2015
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
University of Rochester October 17, 2008 Brooks Landing Business Center
SECTION 260500 COMMON WORK RESULTS FOR ELECTRICAL PART 1 - GENERAL 1.1 SCOPE A. Minimum composition requirements and/or installation methods for the following materials and work are included in this section:
BASIC ELECTRICAL MATERIALS AND METHODS
BASIC ELECTRICAL MATERIALS AND METHODS General Scope Provide raceways for all wiring. All exposed and concealed wiring (including low voltage control, telecommunications, and power limited wiring) shall
Fig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property
2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property A brief summary of the most used code references for residential wiring State of Idaho Division of Building Safety Electrical
SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
New Product Flyer Introduction
Dec. 5, 2013 New Product Flyer Introduction Preferred Lightning Protection, Inc. is excited to introduce our newest products and capabilities. Following are several new products with current inventories
CONTENTS. B. System Design and Performance Requirements
16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
Height Finish Pole Options. Series Optics Mounting Lamping Finish Voltage. Metal Halide HPS. H w H070 70w H w H w
Series Optics Mounting Lamping / Wattage Finish Voltage SAMG Saturn Magnum MR Type V MTR* 6 Refractor Refractor is an integral part of the fixture and is not an option. Project: Type: SAMG MR Series Optics
Complete Mechanical Solution: NO sealant or putty required. Can be extended for thicker walls, and ganged for increased capacity.
For the Facility Owner... Self-Adjusting Sealing Mechanism: Nothing to remove, replace, adjust or tighten. Consistent Performance: Fire protection and smoke sealing not dependent on resealing. Retrofittable:
SECTION CONDUITS AND BOXES PART 1- GENERAL. A. Work covered by this section includes the furnishing and installation of conduits and boxes.
SECTION 16111 CONDUITS AND BOXES 1.01 DESCRIPTION PART 1- GENERAL A. Work covered by this section includes the furnishing and installation of conduits and boxes. 1.02 SUBMITTALS A. The Contractor shall
Procurement Services SVC East Fowler Avenue Tampa, Florida (813)
Procurement Services SVC 1073 4202 East Fowler Avenue Tampa, Florida 33620 (813) 974-2481 Web Address: https://www.usf.edu/business-finance/purchasing/public-bids/rfi.aspx October 12, 2018 Invitation to
FORM FOOTWALL. FORM FOOTWALL (floating) (floating) Installation Manual
FORM FOOTWALL (floating) Installation Manual FORM FOOTWALL (floating) OVERVIEW The Form is a UL-listed configurable footwall system. This system can include any combination of base cabinets, upper cabinets,
TOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
Safety cable Ø4.00 (102) CRI / K 9220 Warm Dimming ValuDIM Only
VF100 Bullseye Series - 9121B Trim ROUND ADJUSTABLE ACCENT DOWNLIGHT 1-LIGHT TRIMLESS LED SMALL PROJECT TYPE CATALOG NUMBER ROUND GIMBAL ADJUSTABLE TRIMLESS ACCENT - The VF100 Series of recessed downlight
1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and soffits.
SECTION 09 2216 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Non-load-bearing steel framing systems for interior gypsum board assemblies. 2. Suspension systems for interior gypsum ceilings and
OmniQuick. Slide-T ogether Fixed Mount Model WQF-20. The total package equals superior value! Slide-T ogether Fixed Mount Configurations.
Slide-T ogether Fixed Mount Model WQF-20 What s the function? Interlocking flanges allow quick, slide-together, fixedposition mounting on walls or ceilings. What makes it so easy to install? Quick three-phase
SECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
DIVISION 26 RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL RELATED DOCUMENTS
PART 1 - GENERAL 01.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply to work of this Section.
Raceway Solutions TM. Conventional Underfloor Duct. Multi-Compartment Conventional Duct Saves Time and Money in Your In-Slab Wire Management System
Multi-Compartment Conventional Duct Saves Time and Money in Your In-Slab Wire Management System The Raceway Solutions System is an in-slab wire management product for delivering power, voice and data services
A. Product Data: For surface pathways, wireways and fittings, floor boxes, hinged-cover enclosures, and cabinets.
ALLIANT ENERGY CENTER PAVILIONS Project No. 2013 027 SECTION 27 05 28 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
1993 Specifications CSJ SPECIAL SPECIFICATION 4880 Bridge Equipment Cabinets
1993 Specifications CSJ 0331-04-050 SPECIAL SPECIFICATION 4880 Bridge Equipment Cabinets 1. Description. This Item shall govern for furnishing and installation of Equipment Cabinets for the Bridge Collapse
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES AIR TERMINAL AIR TERMINAL FIXING BASE (flat) Material Aluminium / Copper Model Al-300-16 / Cu-300-16 Model Al-16 / GM-16 Diameter 16mm
VIA 3 SKIM LED - PATTERNS W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: Via Skim is designed to illuminate textured or polished vertical surfaces with a grazing light from TYPE: the wall/ceiling intersection. Via Skim NOTES: provides continuous illumination
D-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature
DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design
ERK Series. features: options: specifications: enclosure. what great systems are built on.
enclosure The ERK Series 19 welded stand-alone / gangable enclosures. Advanced manufacturing techniques provide highest quality and lowest price. features: specifications: Fully welded construction 2,500
WALLPLATES. Screwless Wallplates. Plastic Wallplates M4-M9. Metal Wallplates M10-M14 M-1
WALLPLATES ENERLITES Wiring Devices line of wallplates is designed and manufactured to address a wide range of applications. ENER- LITES wallplates are of the finest quality, We manufacture our wallplates
This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
AFC Cable Systems, Inc. Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-MC
AXIOM Building Perimeter System Assembly and Installation Instructions
CEILING SYSTEMS AXIOM Building Perimeter System Assembly and Installation Instructions 1 GENERAL 1.1 Description Axiom Building Perimeter Systems (ABPS) is a pre-engineered perimeter solution to accomplish
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-26 05 48.00 10 (October 2006) ---------------------------------- Preparing Activity: USACE Superseding UFGS-26 05 48.00 10 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral