Tandem subtly articulates the entry to the building. We were very pleased with the result.

Transcription

1 Tandem subtly articulates the entry to the building. We were very pleased with the result. RACHEL PETRO RNL Lighting designer TANDEM National Renewable Energy Labs Golden, Colorado Architeture by RNL STRUCTURA INC STRUCTURA INC. 25

2 ORTHO EVO TILT THREE PROFILES TO CHOOSE FROM Design by Clockwork Clockwork was founded by Christian Arnold and Neil Sommers in 2004 as a design studio concentrating on architecture, interior design, branding and industrial design. They have come to be known for adding unique industrial design elements to each space or product they create. Their rapid prototyping metal fabricating shop enhances the firm s ability to study nuanced details of a piece early on in the design process STRUCTURA INC STRUCTURA INC. 27

3 Standard Finishes: Custom Finish Examples: Wood Concrete Corten Weathering Steel Painted Aluminum Roano Zinc* River Current Zinc* Angel Hair Stainless * BASE OPTIONS Tandem is an exploration of contrast in form, color and texture. Site lighting can now respond to the surrounding architecture and site. Wood brings with it warmth and entices the senses. Natural variations in color and texture of concrete provide depth and blends perfectly into the landscape. Custom finishes like stainless steel, zinc, and weathering steel provide endless possibilities of light and shadow. These are a relief to the sterile finishes commonly seen in outdoor lighting and are only a sampling of what is possible with Tandem. * by Zahner Architectural Metals STRUCTURA INC STRUCTURA INC. 29

4 24' A24-BP18 A24-BP B20-BP18 A16-BP18R 12' B12-BP A12-BP18R B12-BP A12-BP18 A12-BP ORTHO 24 EVO 13.5 EVO 24 TILT 17.5 TILT 21.5 ORTHO 12 Configured your way Configure Tandem to uniquely respond to your project s needs. Mount street side luminaires high allowing for greater distance between poles and better light distribution. Mount low-wattage pedestrian scale luminaires at lower heights to bring a more human scale to public spaces STRUCTURA INC STRUCTURA INC. 31

5 fixture mounting options BOLT PLATE MOUNTING OPTIONS Bolt plate is supplied pre-drilled per order for mounting of specified luminaires by others. MAST ARM MOUNTING OPTIONS 2 3/8 diameter mast arm for use when mounting luminaires with industry standard slipfitter adapters. Base detail standard with concealed anchor bolt mounting, aluminum cross ties and choice of panel material. SPECIFY 2 3/8 diameter x 4 BP-FLUSH MOUNT 4 MA-FLUSH MOUNT Single arm mounted between tandem pole. Specify the height of arm. (Luminaire by others.) SPECIFY 2 3/8 diameter x 4 BPR-FLUSH MOUNT WITH EXTENSION 4 MAR-FLUSH MOUNT WITH EXTENSION SPECIFY 2 3/8 diameter x BP12-12 ARM MA12-12 ARM SPECIFY 2 3/8 diameter x BP12R-12 ARM WITH EXTENSION MA12R-12 ARM WITH EXTENSION STRUCTURA INC STRUCTURA INC. 33

6 Elevation Drawings arm shown on side A with rear arm extension Fixture Side B No Fixture 2 x or.25 Thick Aluminum Poles Pole Height Fixture Mounting Height Side panels (specify material and finish) A Side B Side A Elevation Side Elevation B Elevation STRUCTURA INC STRUCTURA INC. 35

7 How To Order HOW TO ORDER: Follow these steps below to order. Number designations match those found in the Ordering Guide Specify the product series. 2. Specify the overall pole height. This height is independent of the height of the highest luminaire. 3. Choose a powdercoat paint finish for pole. Custom colors are available. Indicate RAL color with the order or provide a paint chip for color match. 3,4 4. Determine required wall thickness. The total EPA of all fixtures must not exceed the maximum allowable EPA for the pole at the specified height and wind zone. See maximum wind load tables for allowable EPA. 5. Specify the mounting height of the A side luminaire. The A side luminaire is not required to be mounted at the top of the pole as shown in the drawing. Listed mounting heights are on a 4 module providing the best overall scale to the assembly. 6. Select the required A side luminaire mount. Choices include flush or arm mount options. Luminaires can be mounted using mast arm slip fitters or bolt plates Specify the mounting height of the B side luminaire similar to side A Specify the B side luminaire mount similar to side A. 9. Choose the base panel material. Consult the factory for use of other materials or panels. 10. Select any additional options, or special requirements. 1,9 11. Indicate MOD if the order requires any special mounting, electrical requirements, dimensions, custom finishes or other deviations from the product specification. A Side B Side STRUCTURA INC.

8 FIXTURE TYPE: PROJECT NAME: ORDERING GUIDE: EXAMPLE EVO-21.5-WHT-125-A20BP18R-B12MA-P2ALU-STD Series Ortho Evo Tilt Ortho Evo Tilt 2 Pole Height 12 12' ' 16 16' ' 20 20' ' 24 24' ' A Side 5 Fixture Mounting Height A0 No fixture this side A12 12' A16 16' A20 20' A24 24' 6 Mounting Type (2) MA MAR MA18 MA18R 2 3/8" Diameter Mast Arms Flush Mount Flush Mount with 6" Rear Extension 18" Arm 18" Arm with 6" Rear Extension B Side 7 Fixture Mounting Height B0 No fixture this side B12 12' B16 16' B20 20' B24 24' 8 Mounting Type (2) MA MAR MA18 MA18R 2 3/8" Diameter Mast Arms Flush Mount Flush Mount with 6" Rear Extension 18" Arm 18" Arm with 6" Rear Extension 3 Pole Finish **** See color options on page 88 finishes tech sheet. CSM Custom Color 4 Wall Thickness (1) " wall " wall BP BPR BP18 BP18R Bolt Plates Flush Mount Flush Mount with 6" Rear Extension 18" Arm 18" Arm with 6"Rear Extension Bolt Plates BP Flush Mount BPR Flush Mount with 6" Rear Extension BP18 18" Arm BP18R 18" Arm with 6"Rear Extension 9 Panel Material P1 P2 CP (3) Wood (specify wood color) Aluminum (specify paint color) Custom Material (specify) (3) 10 Options DIN DUP Electrical DIN Rail Duplex Receptacle 11 Special STD MOD Standard Modified Footnote (1) Wall thickness determines the poles maximum wind loading per a given wind zone. See wind loading tables. (2) Leave this section blank if no fixture is on this side (3) See options on page finishes tech sheet 2012 STRUCTURA INC. 37