Dock Bumpers and Support Ledgers Racking and Railing Attachments
|
|
- Meagan Johns
- 6 years ago
- Views:
Transcription
1 General Information General Information Power-Bolt Heavy-Duty Sleeve Prouct Description The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable. It is available with a finishe hex hea or flat hea with a hex key insert an can be use in concrete, block, brick, or stone. Expansion occurs at two locations within the rille hole. First, the cone is pulle into the large triple-tine expansion sleeve, eveloping a mi-level, compression force. Further turning causes the threae bolt to avance into the threas of the expaner cone, forcing its four sections outwar. This action engages the base material eep in the anchor hole, greatly increasing the holing power of the Power-Bolt. The bolt an cone remain locke together which prevents loosening uner vibratory conitions. The Power-Bolt is also esigne to raw the fixture into full bearing against the base material through the action of its flexible compression ring. As the anchor is being tightene, the compression ring will crush if necessary to tightly secure the fixture against the face of the base material. The internal bolt of the Power-Bolt is removable an reusable in the same anchor sleeve making it suitable for applications such as mounting machinery which may nee to be remove for service an for temporary applications such as heavy uty form work. General Applications an Uses Column Base Plates an Mechanical Equipment Feature an Benefits + + High loa capacity + + Two-level expansion mechanism + + Internal high strength bolt is removable an reusable Dock Bumpers an Support Legers Racking an Railing Attachments + + Compression zone in sleeve clamps fixture to the base material + + Low profile finishe hea esign Approvals An Listings Teste in accorance with ASTM E4 an AC01 criteria Unerwriters Laboratories (UL Liste) File o. EX9 (See listing for sizes) Section contents General Information...1 Installation Specifications... Material Specifications...3 Performance Data...4 Design Criteria (Allowable Stress Design)...7 Orering Information...10 Hex hea Power-Bolt assembly flat hea power-bolt assembly Hea styles Finishe Hex Hea Flat Hea ACHOR MATERIALS Zinc Plate Carbon Steel (Flat Hea) Type 304 Stainless Steel (Hex Hea) ACHOR SIZE RAGE (TYP.) " iameter through 5/" iameter SUITABLE BASE MATERIALS ormal-weight concrete Lightweight concrete Groute Concrete Masonry (CMU) Hollow CMU Brick Masonry Stone Guie Specifications CSI Divisions: Concrete s, Masonry s, an Post-Installe Concrete s. Expansion anchors shall be Power-Bolt as supplie by Powers Fasteners, Inc., Brewster, Y. TECH MAUAL 015 POWERS olume 1 9/015 rev. e 1
2 Installation Specifications Installation Specifications Carbon Steel Flat Hea Power-Bolt (0 hea), Dimension 3/" 1/" 5/" ASI Drill Bit Size, bit () 3/ 1/ 5/ Fixture Clearance Hole, h () 7/16 9/16 11/16 Internal Bolt Size (UC) 5/16-1 3/-16 1/-13 Hea Height () 15/64 1/64 Hea, h () 3/4 7/ 1-1/ Allen Wrench Size () 7/3 5/16 3/ Max Bolt Torque, Tmax (ft-lbs) Stainless Steel Hex Hea Power-Bolt, Dimension " 3/" 1/" ASI Drill Bit Size, bit () 3/ 1/ Fixture Clearance Hole, h () 5/16 7/16 9/16 Internal Bolt Size (UC) /16-1 3/-16 Hea Height () 7/64 13/64 15/64 Washer O.D., w () 1/ 13/16 1 Wrench Size () 5/16 1/ 9/16 Max Bolt Torque, Tmax (ft-lbs) 3 5 Installation Proceure Using the proper iameter bit, rill a hole into the base material to a epth of at least 1/" or one anchor iameter eeper than the embement require. The tolerances of the rill bit use must meet the requirements of ASI Stanar B.15. Blow the hole clean of ust an other material. Do not moify the anchor or avance the bolt in the anchor assembly prior to installation. Drive the anchor through the fixture into the anchor hole until the bolt hea is firmly seate against the fixture. Be sure the anchor is riven to the require embement epth. Tighten the anchor by turning the hea 3 to 4 turns past finger tight. TECH MAUAL 015 POWERS olume 1 9/015 rev. e l h v f w bit h t l h v f h bit h t omenclature = of anchor bit = of rill bit h = of fixture clearance hole h = Flat Hea of w = of washer h = Base material thickness. The minimum value of h shoul be 1.5 or 3" whichever is greater = embement epth l = Overall length of anchor t = Fixture thickness
3 Material Specifications Material Specifications Component Carbon Steel Flat Hea Stainless Steel Hex Hea Internal Bolt SAE Grae 5 **Type 304 SS Washer /A Type 1- SS Expaner Sleeve AISI 1010 Type 304 SS Extension Sleeve AISI 1010 Type 304 SS Expaner Cone AISI L14 Type 303 SS Compression Ring ylon ylon Dust Cap ylon ylon Zinc Plating ASTM B 633, SC1, Type III (Fe/Zn 5) Mil Service Conition /A ** Manufacture with a minimum yiel strength of 65,000 psi. Stainless steel anchor components are passivate. The stainless steel expaner cone is zinc plate. washer bolt extension sleeve compression ring flat hea bolt hex insert extension sleeve compression ring Length Ientification (Threae ersion) length iameter length iameter ust cover expaner cone expaner sleeve ust cover expaner cone expaner sleeve Mark t n A B C D E F G H I From 1/" 1" 1-1/" " " 3" 3-1/" 4" 4-1/" 5" 5-1/" Up to but not incluing 1" 1-1/" " " 3" 3-1/" 4" 4-1/" 5" 5-1/" 6" TECH MAUAL 015 POWERS olume 1 9/015 rev. e 3
4 Performance Data Performance Data Ultimate Loa Capacities for Carbon an Stainless Steel Power-Bolt in ormal-weight Concrete 1, 3/ 1/ (.7) 5/ Embement (31.) 1-3/4 (44.5) (50.) 3-1/ (.9) 3-1/ (.9) 5 (7.0) -3/4 (69.9) 4 (101.6) Concrete Compressive Strength (f c),000 psi (13. MPa) 3,000 psi (0.7 MPa) 4,000 psi (7.6 MPa) 6,000 psi (41.4 MPa) 945 (4.) 10 (5.0) 1505 (6.7) 3,500 (15.) 3,00 (17.1) 4,395 (19.) 4,900 (.1) 6,140 (7.6) 7,60 (3.7) 5,360 (4.1) 6,460 (9.1) 1655 (7.4) 1655 (7.4) 1655 (7.4) 3,95 (17.9) 4,30 (19.7) 4,90 (.4) 6,40 (30.),540 (3.4) 10,140 (45.6) 7,970 (35.9) 10,60 (4.9) 1105 (4.9) (6.9) 4,045 (1.) 4,330 (19.5) 5,195 (3.4) 5,710 (5.7) 7,590 (34.),40 (3.) 6,535 (9.4),10 (36.9) 160 (7.5) 145 (.) 15 5,05 (3.4) 5,770 (6.0) 6,15 (30.7) 7,535 (33.9) 9,00 (41.4) 11,30 (50.5) 9,970 (44.9),710 (57.) 65 (5.6) 1360 (6.0) 1600 (7.1) 4,55 (0.6) 4,55 (1.) 5,995 (7.0) 6,50 (9.3) 9,040 (40.7) 9,700 (43.7) 7,705 (34.7) 9,960 (44.) 1705 (7.6) (.1) 6,45 (.9) 7,160 (3.),650 (3.9),5 (37.0) 9,60 (44.4),30 (55.4) 11,970 (53.9) 14,560 (65.5) 1. Tabulate loa values are for anchors installe in concrete. Concrete compressive strength must be at the specifie minimum at the time of installation.. Ultimate loa capacities must be reuce by a minimum safety factor of 4.0 or greater to etermine allowable working loa. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea (5.9) 1490 (6.6) 160 (7.5) 5,915 (6.6) 6,665 (30.0) 7,150 (3.) 7,30 (3.9) 9,90 (44.5) 10,935 (49.),490 (3.) 13,110 (59.0) 1705 (7.6) (.1) 7,440 (33.5) 7,960 (35.),650 (3.9),5 (37.0) 10,70 (4.5),315 (55.4) 11,970 (53.9) 15,900 (71.6) Allowable Loa Capacities for Carbon an Stainless Steel Power-Bolt in ormal-weight Concrete 1,,3 TECH MAUAL 015 POWERS olume 1 9/015 rev. e 3/ 1/ (.7) 5/ Embement (31.) 1-3/4 (44.5) (50.) 3-1/ (.9) 3-1/ (.9) 5 (7.0) -3/4 (69.9) 4 (101.6) Concrete Compressive Strength (f c),000 psi (13. MPa) 3,000 psi (0.7 MPa) 4,000 psi (7.6 MPa) 6,000 psi (41.4 MPa) 35 (1.0) 0 (1.) (3.9) 950 (4.3) 1,100 (5.0) 1,5 1,535 (6.9) 1,15 (.) 1,340 (6.0) 1,615 (7.3) 415 (1.) 415 (1.) 415 (1.) 995 (4.5) 1,095 (4.9) 1,45 (5.6) 1,710 (7.7),135 (9.6),535 (11.4) 1,995,715 (.) 75 (1.) 310 (1.4) 390 1,010 (4.5) 1,00 (4.9) 1,300 (5.9) 1,430 1,900 (.6),0 1,635 (7.4),055 (9.) (.0) 545 (.4) 1,300 (5.9) 1,445 (6.5) 1,705 (7.7) 1,5 (.5),300 (10.4),10 (.6),495 (11.) 3,10 (14.3) 315 (1.4) 340 (1.5) 400 (1.) 1,145 (5.) 1,15 1,500 (6.) 1,630 (7.3),60 (10.),45 (10.9) 1,95 (.7),490 (11.) (.3) 60 (3.0) 1,605 (7.) 1,790 (.1),165,055 (9.),465 (11.1) 3,00 (13.9),995 (13.5) 3,640 (16.4) 335 (1.5) ,40 (6.7) 1,665 (7.5) 1,790 (.1) 1,30 (.),470 (11.1),735 (.3),5 (9.6) 3,75 (14.7) 1. Allowable loa capacities liste are calculate using an applie safety factor of 4.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea.. Allowable loa capacities are multiplie by reuction when anchor spacing or ege istances are less than critical istances. 3. Linear interpolation may be use to etermine allowable loas for intermeiate embements an compressive strengths (.3) 60 (3.0) 1,60 (.4) 1,990,165,055 (9.),695 (.1) 3,00 (13.9),995 (13.5) 3,975 (17.9) 4
5 Performance Data Ultimate an Allowable Loa Capacities for Carbon an Stainless Steel Power-Bolt in Structural Lightweight Concrete 1,,3 3/ 1/ (.7) 5/ Embement (31.) (50.) (50.) 3-1/ (.9) 5 (7.0) -3/4 (69.9) 1,000 (4.5) 1,510 (6.),160 4,00 3,60 (16.6) 5,540 (4.9) 3,0 (14.0) Concrete Compressive Strength (f c) 3,000 psi (0.7 MPa) 5,000 psi (34.5 MPa) Ultimate Loa Allowable Loa Ultimate Loa Allowable Loa 1,50 (6.) 1,540 (6.9),70 (.5) 4,90 (.4) 4,615 (0.),730 (39.3) 6,40 (30.) (.4) 1,050 (4.7) 90 (4.1) 1,35 (6.) 70 (3.5) (3.1) 1,45 (5.6) 1,155 (5.),15 (9.) 1,710 (7.7) 1,30 (5.9) 1,50 (6.) 330 (1.5) 30 3,40 (14.6),70 (.5) 10 (3.6) 695 (3.1) 4,90 (.1) 4,615 (0.) 1,30 1,155 (5.) 1. Tabulate loa values are for anchors installe in san-lightweight concrete. Concrete compressive strength must be at the specifie minimum at the time of installation.. Allowable loa capacities liste are calculate using an applie safety factor of 4.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 3. Linear interpolation may be use to etermine ultimate an allowable loas for intermeiate embements an compressive strengths. 5,40 (3.6) Ultimate an Allowable Loa Capacities for Carbon an Stainless Steel Power-Bolt Installe Through Steel Deck into Structural Lightweight Concrete 1,,3,4 3/ 1/ (.7) 5/ Embement (31.) (50.) -3/4 (.9) 70 (3.) 70 (3.) 1,640 (7.4) 6,40 (30.) 1,310 (5.9) Lightweight Concrete over minimum 0 Gage Metal Deck, f c 3,000 (0.7 MPa) 1-1/" Wie Deck 4-1/" Wie Deck Ultimate Loa Allowable Loa Ultimate Loa Allowable Loa,360 (10.6),740 (.3),740 (.3) 10 (0.) 10 (0.) 410 (1.) 590 (.7) 65 (3.1) 65 (3.1) 90 (4.1) 1,40 (.3),000,000,360 (10.6),740 (.3) 4,400 (19.) 4,440 (0.0) 30 (1.0) 460 (.1) 500 (.3) 500 (.3) 1. Tabulate loa values are for anchors installe in san-lightweight concrete over steel eck. Concrete compressive strength must be at the specifie minimum at the time of installation.. Allowable loa capacities liste are calculate using an applie safety factor of 4.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 3. Tabulate loa values are for anchors installe in the center of the flute. Spacing istances shall be in accorance with the spacing table for lightweight concrete. 4. s are permitte to be installe in the lower or upper flute of the steel eck provie the proper installation proceures are maintaine. 1,710 (7.7) 590 (.7) 65 (3.1) 1,100 (5.0) 1,110 (5.0) TECH MAUAL 015 POWERS olume 1 9/015 rev. e 5
6 Performance Data Ultimate an Allowable Loa Capacities for Power-Bolt in Grout-Fille Concrete Masonry 1,,3,4 3/ 1/ (.7) 5/ Embe. 1-1/ (.6) (50.) 3-1/ (.9) 4 (101.6) -3/4 (69.9) 5 (7.0) Ege 5- (133.4) 5-5/ (14.9) 7-7/ (00.0) 7-1/ (190.5) 10-1/ (66.7) 9-3/ (3.1) 13-1/ (333.4) En 5-5/ (14.9) 5-5/ (14.9) 7-1/ (190.5) 7-1/ (190.5) 9-3/ (3.1) 9-3/ (3.1) Ultimate Loa 1,15 1,760 (7.9) 1,95 (.9),0,435 (11.0),690 (.1),560 (11.5),975 (13.4) f m 1,500 psi (10.4 MPa) 1,15 (5.3) 1,15 (5.3) 3,065 (13.) 3,065 (13.) 5,650 (5.4) 5,650 (5.4) 9,000 (40.5) 9,000 (40.5) Allowable Loa (1.6) 395 (1.) (.) 540 (.4) 510 (.3) 595 (.7) (.) 615 (.) 1,130 (5.1) 1,130 (5.1) 1,00 (.1) 1,00 (.1) 1. Tabulate loa values are for carbon steel an stainless steel anchors installe in minimum 6-inch wie, minimum Grae, Type II, lightweight, meium-weight or normal-weight concrete masonry units conforming to ASTM C 90. Mortar must be minimum Type. Masonry cells may be groute. Masonry compressive strength must be at the specifie minimum at the time of installation (f m 1,500 psi).. Allowable loa capacities liste are calculate using an applie safety factor of 5.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 3. Linear interpolation may be use to etermine ultimate an allowable loas for intermeiate embement epths. 4. The tabulate values are for anchors installe at a minimum of anchor iameters on center for 100 percent capacity. Spacing istances may be reuce to 6 anchor iameters on center provie the capacities are reuce by 50 percent. Linear interpolation may be use for intermeiate spacing. En (Typ) Ege (Typ) Ultimate an Allowable Loa Capacities for Power-Bolt in Hollow Concrete Masonry 1,,3,4,5 TECH MAUAL 015 POWERS olume 1 9/015 rev. e 3/ 1/ (.7) Embe. 7/ (.) (31.) 1-1/ (3.1) (31.) 1-1/ (3.1) (31.) 1-1/ (3.1) Ege (304.) (304.) (304.) (304.) En (03.) (304.) (03.) (304.) (03.) (304.) Ultimate Loa 600 (.7) 5 (3.7) 1,130 (5.1) 1,360 (6.1) 1,470 (6.6),560 (11.5),560 (11.5) f m 1,500 psi (10.4 MPa) 765 (3.4) 1,055 (4.) 1,30,150,600 (11.7),150 3,35 (15.) Allowable Loa 0 (0.5) 165 (0.7) 5 (1.0) 70 (1.) 95 (1.3) 590 (.4) 510 (.3) 155 (0.7) 10 (0.9) (.3) (3.0) 1. Tabulate loa values are for carbon steel an stainless steel anchors installe in minimum 6-inch wie, minimum Grae, Type II, lightweight, meium-weight or normal-weight concrete masonry units conforming to ASTM C 90. Mortar must be minimum Type. Masonry cells may be groute. Masonry compressive strength must be at the specifie minimum at the time of installation (f m 1,500 psi).. Allowable loa capacities liste are calculate using an applie safety factor of 5.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 3. Linear interpolation may be use to etermine ultimate an allowable loas for intermeiate embement epths. 4. The tabulate values are for anchors installe at a minimum of 16 anchor iameters on center for 100 percent capacity. Spacing istances may be reuce to anchor iameters on center provie the capacities are reuce by 50 percent. Linear interpolation may be use for intermeiate spacing. 5. A suitable anchor length must be selecte which inclue consieration of fixture to engage the base material at the minimum embement epth when anchoring into hollow concrete masonry. (e.g. attachment thickness + embement + one half inch = suitable anchor length) 6
7 Design Criteria (Allowable Stress Design) Ultimate an Allowable Loa Capacities for Power-Bolt in Clay Brick Masonry 1,,3 Dia. 3/ 1/ (.7) 5/ M Embe. M Ege 7/ (.) 1-1/ (03.) (3.1) (50.) (304.) -3/4 (69.9) 16 (406.4) M En 4 (101.6) 6 (15.4) (03.) 10 (54.0) M Spacing 6 (15.4) (03.) 10 (54.0) (304.) Structural Brick Masonry f m 1,500 psi (10.4 MPa) Ultimate Loa 1,090 (4.9) 1,455 (6.6),015 (9.1) 3,110 (14.0) 4,535 (0.4) 1,160 (5.) 1,65 (5.7) 3,655 (16.5) 4,55 (0.6) 5,470 (4.6) Allowable Loa 0 (1.0) 90 (1.3) 405 (1.) 60 (.) 905 (4.1) 30 (1.0) (3.3) 915 (4.1) 1,095 (4.9) 1. Tabulate loa values are for anchors installe in multiple wythe, minimum Grae SW, soli clay brick masonry walls conforming to ASTM C 6. Mortar must be minimum Type. Masonry compressive strength must be at the specifie minimum at the time of installation (f m 1,500 psi).. Allowable loa capacities liste are calculate using an applie safety factor of 5.0. Consieration of safety factors of 10 or higher may be necessary epening upon the application such as life safety or overhea. 3. Spacing between anchors may be reuce to half the liste istances provie the capacities are reuce by 50 percent. Linear interpolation may be use for intermeiate spacing. Design Criteria (Allowable Stress Design) Combine Loaing For anchors loae in both shear an tension, the combination of loas shoul be proportione as follows: u ( ) ( ) u n + 1 n Where: Loa Ajustment Factors for Spacing an Ege s 1 Installe in ormal-weight Concrete Dimension Loa Type Critical (Full Capacity) Ege (Typ) u = Applie Service Loa n = Allowable Loa u = Applie Service Loa n = Allowable Loa Critical Loa Factor (Reuce Capacity) En (Typ) Loa Factor Spacing (s) an scr =.0h v FS = FS =1.0 smin = h v FS = FS =0.50 ccr = FC = 1.0 cmin = 5 FC = 0.70 Ege (c) ccr = FC = 1.0 cmin = 5 FC = 0.35 Installe in Structural Lightweight Concrete Dimension Loa Type Critical (Full Capacity) Critical Loa Factor (Reuce Capacity) Loa Factor Spacing (s) an scr =.0h v FS = FS =1.0 smin = h v FS = FS =0.50 ccr = FC = 1.0 cmin = 5 FC = 0.0 Ege (c) ccr = FC = 1.0 cmin = 5 FC = Allowable loa values foun in the performance ata tables are multiplie by reuction factors when anchor spacing or ege istances are less than critical istances. Linear interpolation is allowe for intermeiate anchor spacing an ege istances between critical an minimum istances. When an anchor is affecte by both reuce spacing an ege istance, the spacing an ege reuction factors must be combine (multiplie). Multiple reuction factors for anchor spacing an ege istance may be require epening on the anchor group configuration. TECH MAUAL 015 POWERS olume 1 9/015 rev. e 7
8 Design Criteria (Allowable Stress Design) Loa Ajustment Factors for ormal-weight Concrete Spacing, (FS) & (FS) Dia. () 3/ 1/ 5/ () 1-3/4 3-1/ 3-1/ 5-3/4 4 6 scr () 3-1/ / smin () 1-3/4 3-1/ 3-1/ 5-3/ / / / / / Spacing, s (inches) otes: For anchors loae in tension an shear, the critical spacing (scr) is equal to embement epths () at which the anchor achieves 100% of loa. spacing (smin) is equal to 1 embement epth () at which the anchor achieves 50% of loa. S Ege, c (inches) Ege, (FC) Dia. () 3/ 1/ 5/ ccr () 3 4-1/ 6 7-1/ cmin () 1-7/ 3-1/ / / / / / otes: For anchors loae in tension, the critical ege istance (ccr) is equal to anchor iameters () at which the anchor achieves 100% of loa. ege istance (cmin) is equal to 5 anchor iameters (5) at which the anchor achieves 70% of loa. C TECH MAUAL 015 POWERS olume 1 9/015 rev. e Ege, c (inches) Ege, (FC) Dia. () 3/ 1/ 5/ ccr () 3 4-1/ 6 7-1/ cmin () 1-7/ 3-1/ / / / / / otes: For anchors loae in shear, the critical ege istance (ccr) is equal to anchor iameters () at which the anchor achieves 100% of loa. ege istance (cmin) is equal to 5 anchor iameters (5) at which the anchor achieves 35% of loa. C
9 Design Criteria (Allowable Stress Design) Loa Ajustment Factors for Lightweight Concrete Spacing, (FS) & (FS) Dia. () 3/ 1/ 5/ () 1-3/4 3-1/ 3-1/ 5-3/4 4 6 scr () 3-1/ / smin () 1-3/4 3-1/ 3-1/ 5-3/ / / / / / Spacing, s (inches) Ege, c (inches) Ege, c (inches) Ege, (FC) Dia. () 3/ 1/ 5/ ccr () 3 4-1/ 6 7-1/ cmin () 1-7/ 3-1/ / / / / / Ege, (FC) Dia. () 3/ 1/ 5/ ccr () 3 4-1/ 6 7-1/ cmin () 1-7/ 3-1/ / / / / / otes: For anchors loae in tension an shear, the critical spacing (scr) is equal to embement epths () at which the anchor achieves 100% of loa. spacing (smin) is equal to 1 embement epth () at which the anchor achieves 50% of loa. S otes: For anchors loae in tension, the critical ege istance (ccr) is equal to anchor iameters () at which the anchor achieves 100% of loa. ege istance (cmin) is equal to 5 anchor iameters (5) at which the anchor achieves 0% of loa. otes: For anchors loae in shear, the critical ege istance (ccr) is equal to anchor iameters () at which the anchor achieves 100% of loa. ege istance (cmin) is equal to 5 anchor iameters (5) at which the anchor achieves 40% of loa. C C TECH MAUAL 015 POWERS olume 1 9/015 rev. e 9
10 Orering Information Orering Information Carbon Steel Flat Hea Power-Bolt Cat.o. Size Drill Dia. M Embe. St. Box St. Carton Wt./ /" x " 3/" " /" x 5" 3/" " /" x 6" 3/" " /" x 5" 1/" " /" x 5-1/" 5/" -3/4" The publishe length is the overall length of the anchor. The flat hea Power-Bolt anchor has a hex key insert forme in the hea of the bolt. Each box contains an Allen wrench which matches the insert size. Stainless Steel Hex Hea Power-Bolt Cat.o. Size Drill Dia. M Embe. St. Box St. Carton Wt./ " x 1-3/4" " " " x 3" " " /" x -" 3/" " /" x 3-1/" 3/" " /" x 4" 3/" " /" x -3/4" 1/" " /" x 4-3/4" 1/" " The publishe length is measure from below the washer to the en of the anchor. TECH MAUAL 015 POWERS olume 1 9/015 rev. e 10
Power-Bolt PRODUCT INFORMATION. Heavy-Duty Sleeve Anchor PRODUCT DESCRIPTION FEATURES AND BENEFITS. Hex Head Power-Bolt Assembly
Power-Bolt Heavy-Duty Sleeve PRODUCT DESCRIPTION The Power-Bolt anchor, is a heavy uty sleeve style, self-locking anchor which is vibration resistant an removable. It is available with a finishe hex hea
More informationLok-Bolt. Lok-Bolt TM PRODUCT INFORMATION. Sleeve Expansion Anchor FEATURES AND BENEFITS APPROVALS AND LISTINGS GUIDE SPECIFICATIONS.
TM Lok-Bolt Sleeve Expansion PRODUCT DESCRIPTION The Lok-Bolt is a pre-assemble single unit sleeve anchor available in carbon steel an stainless steel which can be use in concrete, block, brick, an stone.
More informationPower-Stud PRODUCT INFORMATION. Wedge Expansion Anchor Mechanically Galvanized and Stainless Steel Versions PRODUCT DESCRIPTION
PowerStu TM TM PowerStu Wege Expansion Anchor Mechanically Galvanize an Stainless Steel Versions PRODUCT DESCRIPTION The PowerStu anchor, is a fully threae, torquecontrolle, wege expansion anchor. It is
More informationDropin TM. Hollow-Set TM PRODUCT INFORMATION. GENERAL APPLICATIONS AND USES Anchoring to Concrete Block Fastening to Precast Hollow Core Plank
Hollow-Set TM Dropin TM Internally Threae Expansion PRODUCT DESCRIPTION The anchor is esigne for anchoring in hollow base materials such as hollow concrete block an precast hollow core plank. It can also
More information316 stainless steel wedge-bolt
General Information General Information 1 Stainless Steel Wege-Bolt Screw Prouct Description The 1 Stainless Steel Wege-Bolt anchor is a one piece, heavy uty screw anchor with a finishe hex hea. It is
More informationSpike. Spike PRODUCT INFORMATION. Pre-Expanded Anchor FEATURES AND BENEFITS
Spike PRODUCT DESCRIPTION The Spike anchor, also known as the Rawl Spike, is a patente, one-piece, tamper-proof vibration resistant anchor for use in concrete, block or stone. Several hea styles an anchor
More informationSPECIFICATION & DESIGN MANUAL
Wege-Bolt Screw PRODUCT DESCRIPTION The Wege-Bolt anchor is a one piece, heavy uty anchor with a finishe hex hea. It is easy to ientify, removable an vibration resistant. The Wege-Bolt screw anchor has
More informationSpike. Spike PRODUCT INFORMATION. Pin Anchor FEATURES AND BENEFITS
Spike Spike Pin PRODUCT DESCRIPTION The Spike is a, one-piece, vibration resistant anchor or use in concrete block or stone. Several hea styles, incluing tamperroo versions, an anchor materials are available.
More informationPB-PRO Heavy Duty Sleeve Anchor
GENERAL INFORMATION GENERAL INFORMATION PB-PRO Heavy Duty Sleeve Anchor PRODUCT DESCRIPTION The PB-PRO is a large iameter torque controlle, heavy uty sleeve anchor esigne for concrete applications. Suitable
More informationSPECIFICATION & DESIGN MANUAL
Spike Pre-Expane PRODUCT DESCRIPTION The Spike anchor, also known as the Rawl Spike, is a patente, one-piece, tamper-proof vibration resistant anchor for use in concrete, block or stone. Several hea styles
More informationSPECIFICATION & DESIGN MANUAL
TM Steel Dropin Internally Threae Expansion Anchor PRODUCT DESCRIPTION The Steel Dropin is an all-steel, machine bolt anchor available in carbon steel an two types of stainless steel. It can be use in
More informationPower-Bolt+ (PB+) Heavy Duty Sleeve Anchor
Power-Bolt+ (PB+) Heavy Duty Sleeve Anchor PRODuCT DESCRIPTION The Power-Bolt+ (PB+) anchor is a torque controlle, heavy uty sleeve style anchor which is esigne for consistent performance in cracke an
More informationTapper+ Concrete Screw Anchor PRODUCT DESCRIPTION
Tapper+ Concrete Screw PRODUCT DESCRIPTION The Tapper+ fastening system is a complete family of screw anchors for light to meium uty applications in concrete, masonry block, brick, an woo base materials.
More informationBang-It. and Wood-Knocker. Bang-It TM /Wood-Knocker TM PRODUCT INFORMATION FEATURES AND BENEFITS APPROVALS AND LISTINGS. Bang-It Metal Deck Insert
/Woo-Knocker PRODUCT INFORMATION an Woo-Knocker Concrete s PRODUCT DESCRIPTION concrete inserts are esigne for installation in an through metal composite eck (i.e. pan-eck ) use to support newly poure
More informationPure50+ TM PRODUCT INFORMATION. Epoxy Injection Adhesive Anchoring System PRODUCT DESCRIPTION GENERAL APPLICATIONS AND USES FEATURES AND BENEFITS
PRODUCT INFORMATION Epoxy Injection Ahesive Anchoring System PRODUCT DESCRIPTION The Pure50+ is a two-component ahesive anchoring system. The system inclues injection ahesive in plastic cartriges, mixing
More informationTapper Concrete Scew Anchor Type 410 & 304 Stainless Steel
Conrete Sew Type 4 & 304 PRODUCT DESCRIPTION The fastening system is a family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base materials. The is fast an easy to install
More informationTapper+ Concrete Screw Anchor
General Information General Information Tapper+ Concrete Screw Prouct Description The Tapper+ fastening system is a complete family of screw anchors for light meium uty applications in concrete, masonry
More informationPROJECT SUBMITTAL. Power-Stud TM. Wedge Expansion Anchor PROJECT SUBMITTAL CONTENTS APPROVALS AND LISTINGS
PROJECT SUBMITTAL Power-Stud TM Wedge Expansion Anchor Anchoring into Solid Concrete and Masonry Base Materials Anchor Diameter is the Same as the Hole Diameter Interlocking Clip Wedges Prevent Anchor
More informationC N A K C E D S R E H C AN K C E D S R E H C AN K C E D S R E H C AN K C E D S R E H C N AAN K C E D S R E H C
DECK ANCHERS DECK ANCHERS DECK ANCHERS DECK ANCHERS DECK ANCHERS DECK ANCHERS DECK ANC DECK ANCHORS METAL DECK ANCHOR AND WOOD DECK ANCHOR PRODUCT DESCRIPTION concrete inserts are esigne for installation
More informationAC100+ GOLD GENERAL INFORMATION GENERAL INFORMATION SECTION CONTENTS. Vinylester Injection Adhesive Anchoring System
GENERAL INFORMATION GENERAL INFORMATION AC100+ GOLD Vinylester Injection Ahesive Anchoring System PRODUCT DESCRIPTION The AC100+ Gol is a twocomponent vinylester ahesive anchoring system. The system inclues
More informationPower-Bolt+ Heavy Duty Sleeve Anchor
General Information General Information Power-Bolt+ Heavy Duty Sleeve Anchor Product Description The Power-Bolt+ anchor is a torque controlled, heavy duty sleeve style anchor which is designed for consistent
More informationRetrofits, repairs and maintenance Fencing and railing Cracked and uncracked concrete Seismic and wind loading
General Information GENERAL INFORMATION SCREW-BOLT+ High Performance Screw PRODUCT DESCRIPTION The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install,
More informationTITEN HD Heavy Duty Screw Anchor for Concrete & Masonry
TITEN HD Heavy Duty Screw Anchor for & Masonry The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes
More informationPURE50+ Epoxy Injection Adhesive Anchoring System
GENERAL INFORMATION GENERAL INFORMATION PURE0+ Epoxy Injection Ahesive Anchoring System PRODUCT DESCRIPTION The Pure0+ is a twocomponent ahesive anchoring system. The system inclues injection ahesive in
More informationAllowable Tension Loads for Drop-In (Stainless Steel) and Coil-Thread Drop-In (Carbon Steel) Anchors in Normal-Weight Concrete
Loads for Drop-In (Stainless Steel) and Coil-Thread Drop-In (Carbon Steel) Anchors in Normal-Weight Concrete 4 (.4) (9.5) 2 (2.7) (5.9) 3 4 (9.) 2 7 8 Material Specifications Anchor Component Anchor Body
More informationHFX Adhesive Anchor Adhesive Anchoring Systems
HFX Adhesive Adhesive ing Systems MD300 Dispenser HFX-M Mixer HFX Cartridge Standard Silicon Dispenser Product Description Hilti HFX is a new hybrid adhesive mortar combining resin, hardener, cement and
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
ttached are page(s) from the 2011 Hilti North merican Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation, corrosion,
More informationCHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
More informationStrong Bolt 2 Wedge Anchor for Cracked and Uncracked Concrete
Strong Bolt 2 Wedge Anchor for Cracked and Uncracked Concrete The Strong Bolt 2 wedge anchor is the next-generation solution for cracked and uncracked concrete. Following rigorous testing according to
More informationDOMESTIC WEDGE ANCHOR
GENERAL INFORMATION GENERAL INFORMATION DOMESTIC WEDGE ANCHOR Carbon Steel and Stainless Steel Wedge Expansion Anchors Anchor produced in the U.S.A., nut and washer made in Taiwan or China* PRODUCT DESCRIPTION
More informationBlue-Tip SCREW-BOLT. Ratchet teeth locks head against fixture. Reverse parabolic threads privide high load capacity
Blue-Tip SCREW-BOLT Introduction Blue -Tip SCREW-BOLT anchors have many unique features and benefits that make this innovative anchor well suited for almost every application. Optimum performance is obtained
More informationAC50 Silver Adhesive Anchoring System
General Information General Information AC50 Silver Adhesive Anchoring System Product Description The AC50 Sliver is a two-component, adhesive anchoring system. The system includes injection adhesive in
More informationCarbon steel, ASTM A 563, Grade A Carbon Steel, ASTM F 844; meets dimensional requirements of ANSI B Type A Plain
General Information GENERAL INFORMATION POWER-STUD +SD2 High Performance Wedge Expansion Anchor PRODUCT DESCRIPTION The Power-Stud+ SD2 anchor is a fully threaded, torque-controlled, wedge expansion anchor
More informationDIVISION: CONCRETE SECTION: CONCRETE ANCHORS DIVISION: METALS SECTION: POST-INSTALLED CONCRETE ANCHORS
0 Most Wiely Accepte an Truste ICCES Listing Report ICCES 000 (800) 4236587 (562) 6990543 www.icces.org ELC3298 Issue 05/2017 This listing is subject to renewal 05/2018. DIVISION: 03 00 00 CONCRETE SECTION:
More information6424 1/2 X 5-1/2 Wedge Anchor Zinc. Dimensions and Weight. Description 1/2 X 5-1/2 WEDGE ANCHOR ZINC
30 South Street 759-723, TX Nacogdoches Phone: 93-59-791 Fax: 93-50-5 2 X 5- Wedge Zinc Peco Fasteners, Inc. Catalog Number 2 Manufacturer Peco Fasteners, Inc. Description Wedge, 5- In Length, Zinc Plated,
More informationThe following excerpt are pages from the North American Anchor Fastening Technical Guide, 2011.
The following excerpt are pages from the North American Fastening Technical Guide, 2011. Contact Hilti s team of technical support specialists between the hours of 7:00am 6:00pm CST for complete details
More information8.8 M10/15x90 50Nm. Zinc plated. Mechanically galvanised. PSA anchor. heavy duty vibration resistant removable
Zinc plated 8.8 M10/15x90 50Nm Mechanically galvanised PSA anchor heavy duty vibration resistant removable Edition: April 2011 1 Powers offers the widest range of mechanical and adhesive fasteners in the
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationRetrofits, repairs and maintenance Fencing and railing Seismic and wind loading
General Information GENERAL INFORMATION SCREW-BOLT+ High Performance Screw Anchor PRODUCT DESCRIPTION The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple
More informationDESCRIPTION ADVANTAGES
ADHESIVE ANCHORING SPECIALISTS A7P-10 The Most Versatile Quick Cure Adhesive A7P-28 APPLICATIONS / USES n Concrete dowelling (slabs, walls, columns) n Steel framing (columns, beams, ledgers) n Brick pinning
More informationA7+ The Most Versatile Quick Cure Adhesive
ADHESIVE ANCHORING SPECIALISTS A7P-10 The Most Versatile Quick Cure Adhesive A7P-28 APPLICATIONS / USES n Concrete dowelling (slabs, walls, columns) n Steel framing (columns, beams, ledgers) n Brick pinning
More informationHVAC Ductwork and Strut Channels Suspended Ceilings
General Information General Information Vertigo + Rod Hanger PRODUCT DESCRIPTION Vertigo+ is a one piece, all steel threaded fastening system for suspending threaded rod in applications such as pipe hanging,
More information*Corrected October 2005
ESR-1056* Reissued December 1, 2004 This report is subject to re-examination in two years. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2011 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2966 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 04 00
More informationFor acoustical applications and suspended ceiling systems or light fixtures. Several styles of angled clips with pre-mounted pins.
General Information General Information Ceiling clip assemblies Introduction For acoustical applications and suspended ceiling systems or light fixtures. Several styles of angled clips with pre-mounted
More informationMurphy LVL Installation Guide
Murphy LVL Installation Guie Murphy Company For over 100 years, Murphy Company has manufacture woo proucts for iscerning customers who eman quality. From green an ry softwoo veneer (White City, OR an Elma,
More informationTo: Firm: Project: Product Specified: Specified Location:
Submittal Substitution Request To: Firm: Project: Product Specified: Specified Location: Attached information includes product description, installation instructions and technical data needed for review
More informationFire Sprinkler & pipe supports Cable Trays and Strut Suspended Lighting
General Information Mechanical Anchors GENERAL INFORMATION MINI-UNDERCUT+ Internally Threaded Undercut Anchor PRODUCT DESCRIPTION The Mini-Undercut+ anchor is an internally threaded, self-undercutting
More informationDDI + (DECK INSERT) Threaded Insert for Metal Deck
GENERAL INFORMATION GENERAL INFORMATION DDI + (DECK INSERT) Threaded Insert for Metal Deck PRODUCT DESCRIPTION The DDI+ (Deck Insert) is a concrete insert designed for installation in concrete-illed metal
More informationEasy to Use A7 Saves You Time and Money
ADHESIVE ANCHORING SPECIALISTS Easy to Use Saves You Time and Money DESCRIPTION/SUGGESTED SPECIFICATIONS* Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they
More informationDDI + (DECK INSERT) Threaded Insert for Metal Deck
GENERAL INFORMATION GENERAL INFORMATION DDI + (DECK INSERT) Threaded Insert for Metal Deck PRODUCT DESCRIPTION The DDI+ (Deck Insert) is a concrete insert designed for installation in concrete-illed metal
More informationProduct Submittal/Substitution Request
Product Submittal/Substitution Request TO: PROJECT: PROJECT LOCATION: SPECIFIED ITEM: Section Page Paragraph Description PRODUCT SUBMIT TAL / SUBSTITUTION REQUESTED: The attached submittal package includes
More informationAC100+ GOLD Vinylester Injection Adhesive Anchoring System
GENERAL INFORMATION GENERAL INFORMATION AC100+ GOLD Vinylester Injection Adhesive Anchoring System PRODUCT DESCRIPTION The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system
More informationUsed for Florida State Wide Product Approval #
Used for Florida State Wide Product Approval # Products on this Report which are approved: Product FL# TTN 2355.1 SIMPSON STRONG-TIE COMPANY, INC Jax Apex Technology, Inc. 4745 Sutton Park Court, Suite
More informationApplication-oriented solutions:
Application-oriente solutions: Customise features Different materials an coatings Specific anti-rotation hea Special threa requirements 63 zin-house R&D an technical support for specific applications Dejon
More informationhors Anc Eaton's B-Line series fasteners 183
183 Glossary Prefix - Description Screw Dia. Length Suffix ACB - Concrete Anchor Bolt 4 - #4 75-3 /4" AN - Acorn Nut ACPD - Bang-IT 6 - #6 81-13 /16" CH - Combo Head ACPW - Wood-Knocker 8 - #8 87-7 /8"
More informationFire Sprinkler & pipe supports Cable Trays and Strut Suspended Lighting
GENERAL INFORMATION GENERA L INFORMA TION MINI-UNDERCUT+ Internally Threaded Undercut Anchor PRODUCT DESCRIPTION The Mini-Undercut+ anchor is an internally threaded, self-undercutting anchor designed for
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2966 Reissued 12/2016 This report is subject to renewal 12/2017. DIVISION: 04 00 00 MASONRY
More informationthe varying quality in existing substrates of older buildings. Be sure to specify the following performance criteria as a minimum.
DUR-O-WAL, INC. BRICK REPLACEMENT ANCHOR GUIDE I General Dur-O-Wal has coupled our new masonry construction experience, with our masonry restoration experience, to create a line of anchors specifically
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product including
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Fastening, Edition 16.1. Please refer to the publication in its entirety for complete details on this product
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 4042 Issued 07/2017 This report is subject to renewal 07/2018. DIVISION: 04 00 00
More informationSPECIFICATION & DESIGN MANUAL " AISI 1060 to 1065 Rockwell Hardness 51 to 55 Perma-Seal coated Stick-E Pin 3/4" (Step Shank) 1"
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL TM Stick-E Electrical and Mechanical Fastening System PRODUCT DESCRIPTION The Stick-E fastening system uses Trak-It gas technology with specially designed
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2008 Hilti North American Product Technical Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationLEGACY REPORT ER-5608* Reissued February 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT ER-5608* Reissued February 1, 2004 www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional Office 900 Montclair Road, Suite A, Birmingham,
More informationField Notching and Drilling of Laminated Veneer Lumber
T E C H N I C A L N O T E Fiel Notching an Drilling of Laminate Veneer Lumber EWS G535A June 2010 INTRODUCTION Laminate veneer lumber (LVL) is an engineere woo prouct manufacture from specially selecte
More informationHLC. Hex head nut with pressed-on washer HLC-H. Bolt version with washer HLC-L. Torx round head HLC-SK. Torx Counter sunk head HLC-EC
HLC Anchor version Hex head nut with pressed-on washer Benefits HLC offers various head shapes and fastening thicknesses. HLC-H Bolt version with washer HLC-L Torx round head HLC-SK HLC-EC HLC-EO HLC-T
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC. EVALUATION SUBJECT: KWIK BOLT TZ MASONRY ANCHORS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 687 (6) 699 04 www.icc es.org ESR 78 Reissued 07/018 This report is subject to renewal 07/019. DIVISION: 04 00 00 MASONRY
More informationSubmittal Information
Adhesive Fast Dispensing, Fast Curing The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into
More informationHeavy duty loading Pipe supports, strut & base mounts Suspended equipment Seismic and wind loading
General Information GENERAL INFORMATION ATOMIC+ UNDERCUT Heavy Duty Undercut PRODUCT DESCRIPTION The Atomic+ Undercut anchor is designed for applications in cracked and uncracked concrete. The anchors
More informationFROM: PROPOSED SUBSTITUTION: Use HILTI X-U instead of fillet weld or arc spot puddle weld
DATE: PROJECT: TO: FROM: SUBJECT: HILTI X-U POWDER-ACTUATED FASTENER SUBSTITUTION REQUEST SPECIFICATION TITLE: SECTION: PAGE: ARTICLE/PARAGRAPH: DESCRIPTION: DESIGN DETAIL NO.: PROPOSED SUBSTITUTION: Use
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 687 (6) 699 0 www.icc es.org ESR 8 Reissued 0/08 This report is subject to renewal 0/09. DIVISION: 0 00 00 MASONRY SECTION:
More informationDEVELOPMENT, SPLICES, AND SIMPLE SPAN BAR CUTOFFS
CHAPTER Reinforce Concrete Design Fifth Eition DEVELOPMENT, SPLICES, AND SIMPLE SPAN BAR CUTOFFS A. J. Clark School of Engineering Department of Civil an Environmental Engineering Part I Concrete Design
More informationSubmittal Information
Adhesive INSTALLATION STEPS 35 Minute Cure Time at 60 F Fast Dispensing at all Temperatures Cures Down to 0 F and Below Multi-Patented Formula Miami-Dade County Product Control Approved Contents: 825 ml
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationConcrete Screw-Anchors
Screw-Anchors Screw-Anchor are a totally removable rotation setting, thread forming anchor, ideal for either temporary or permanent anchoring into substrates such as concrete, brick, hollow brick or block.
More informationChem-Stud CHEMICAL SPIN TYPE CAPSULE ADHESIVE PRODUCT DESCRIPTION CHEM-STUD ADHESIVE PROPERTIES
192 Chem-Stud SPIN TYPE CAPSULE ADHESIVE BASE MATERIAL Solid Concrete SIZE RANGE 3" to 1-1" Anchor Rod, No. 3 to No.10 Reinforcing Bar ANCHOR MATERIAL Ester Based Resin PRODUCT DESCRIPTION The Chem-Stud
More informationSubmittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE STRONG-BOLT Wedge Anchor for Cracked and Uncracked Concrete Specified Product: Section: Page: Detail/Sheet
More informationWedge Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE. Trubolt. Wedge Anchor ADVANTAGES
CONCRETE ANCHORING SPECIALISTS Dependable, Heavy-Duty, Inspectable, Wedge Type Expansion Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Wedge Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchors
More informationPipe supports Seismic and wind loading applications Fire sprinklers. Suspended lighting
General Information GENERAL INFORMATION SNAKE+ Internally Threaded Screw Anchor PRODUCT DESCRIPTION The Snake+ anchor is an internally threaded, selftapping screw anchor designed for performance in cracked
More informationwhere: P s = Applied service tension load, pounds (kg). P t V s V t
Æ Æ Æ Æ Æ Æ Æ Æ Æ ESR-1752 Most Widely Accepted and Trusted Page 2 of 7 3.1.7 X-S16P8TH: The X-S16P8TH fastener is a powder actuated fastener for installation into steel. It has a shank diameter of 0.145
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationFROM: SUBJECT: HILTI X-ENP-19, X-HSN 24 or X-U POWDER-ACTUATED FASTENER SUBSTITUTION REQUEST
DATE: PROJECT: TO: FROM: SUBJECT: HILTI X-ENP-19, X-HSN 24 or X-U POWDER-ACTUATED FASTENER SUBSTITUTION REQUEST SPECIFICATION TITLE: SECTION: PAGE: ARTICLE/PARAGRAPH: DESCRIPTION: DESIGN DETAIL NO.: PROPOSED
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1678 Reissued 03/2017 This report is subject to renewal 03/2018. DIVISION: 04 00 00 MASONRY
More informationPipe supports seismic and wind loading applications Fire sprinklers suspended lighting
GENERAL INFORMATION GENERAL INFORMATION SNAKE+ Internally Threaded Screw Anchor PRODUCT DESCRIPTION The snake+ anchor is an internally threaded, selftapping screw anchor designed for performance in cracked
More informationHollo-Bolt. Hollo-Bolt by Lindapter. Hollo-Bolt Options
Hollo- by Lindapter 37 Hollo- by Lindapter Installation is quickly carried out by inserting into pre-drilled steel and tightening with a torque wrench. Independent approvals include ICC-ES seismic accreditation,
More informationDRILL. DRIVE. DONE. EVERYWHERE.
DRILL. DRIVE. DONE. EVERYWHERE. Screw anchor HUS-/ (SS 316) DBS 11/17 COMBINE THE ADVANTAGES OF SEW ANCHORS WITH SUPERB CORROSION RESISTANCE HUS- 8 11/16 HUS- 10 13/16 The Hilti KWIK HUS-EZ difference
More informationDRILL. DRIVE. DONE. EVERYWHERE.
DRILL. DRIVE. DONE. EVERYWHERE. Screw anchor HUS-/ (SS 316) DBS 11/17 COMBINE THE ADVANTAGES OF SEW ANCHORS WITH SUPERB CORROSION RESISTANCE HUS- 8 11/16 HUS- 10 13/16 The Hilti KWIK HUS-EZ difference
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 687 (62) 699 04 www.icc es.org ESR 06 Reissued 0/207 This report is subject to renewal 0/208. DIVISION: 04 00 00 MASONRY
More informationSpaTec Plus. Mechanical Anchoring 27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION
27.1 SAFETY ANCHORS 27.1 GENERAL INFORMATION PERFORMANCE RELATED MATERIAL INSTALLATION RELATED Product A high security, high performance, through fixing, torque controlled expansion anchor which has approval
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3056 Reissued 10/2015 This report is subject to renewal 10/2017. DIVISION: 04 00 00 MASONRY
More informationl MATERIAL SPECIFICATIONS
SECTION 4.5 PAGE 1 / 5 l DESCRIPTION The UCAN Scru-it masonry anchor is manufactured to strict specifications from high quality steel. The proprietary, UCAN designed, scalloped thread cuts deep grooves
More informationET Epoxy-Tie Anchoring Adhesive
ET Epoxy-Tie is a two-component, high solids, epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing
More informationUS Pool Lift Model #114 (Independence) Installation Guide
US Pool Lift Model #114 (Independence) Installation Guide This manual has been provided to assist with lift installation. For further assistance please contact your authorized US Pool Lift dealer. Toll
More informationConcrete screw BSZ Steel/steel zinc flake coated
Concrete screw BSZ Steel/steel zinc flake coated Concrete screw BSZ-SU Concrete screw BSZ-SUH Concrete screw BSZ-SK Concrete screw BSZ-K Concrete screw BSZ-GK Approvals and Certificates Concrete screw
More information