Mass Timber: Knowing Your Options
|
|
|
- Regina Miller
- 6 years ago
- Views:
Transcription
1 Mass Timber: Knowing Your Options Presentation to the Architectural Institute of BC & the American Institute of Architects 24 October, 2013 Ian Boyle P.Eng., Struct.Eng., P.E., S.E. Bernhard Gafner P.Eng., MIStructE, C.Eng., Dipl.Ing. FH/STV Vancouver Edmonton Frankfurt
2 Fresh Thinking Holistic Design Vancouver Edmonton Frankfurt
3 Outline Overview Design process + case studies Future Useful tools
4
5 Overview Definition of Mass Timber Structural Building Systems Products Sizes and Design Characteristics Comparison
6 Mass timber construction uses large and ideally prefabricated wood for wall, floor, and roof construction. [ ] Because of their high strength and dimensional stability, they can be used as alternatives to concrete, masonry and steel in many building types. Quote from MassTimber.com
7 Overview Building Systems
8 Building Systems Light Wood Frame (Stick Frame)
9 Building Systems Post + Beam (with Mass Timber or light wood frame floors)
10 Building Systems Mass Timber (100%)
11 Building Systems Institutional Residential Light Wood Frame Post + Beam Mass Timber (100%) Mass Timber Floors (and Shearwalls) Mass Timber Walls and Floors
12 Building Systems Institutional Residential Light Wood Frame Post + Beam Mass Timber (100%) Mass Timber Floors (and Shearwalls) Mass Timber Walls and Floors
13 Overview Products
14 Overview NLT Nail Laminated Timber
15 NLT Alternative Names: nailed timber, nail-up, edge-lam, brettstapel System: regular framing members (2x, 3x) on edge + fastened together Suppliers: a good carpenter Basic Info: - material/fibre used: S-P-F / Douglas Fir or any other - harvesting cycle: 80 years - floor, roof (and wall) with Plywood sheathing for lateral loads
16 NLT Comments: Non-standardized panel product
17 NLT Comments: Non-standardized panel product - base material covered with grading rules
18 Courtesy of Nicola Log Works
19 Courtesy of Nicola Log Works
20 NLT Comments: Non-standardized panel product Specifications
21
22 NLT Comments: Non-standardized panel product Specifications Requires care with regards to swelling / shrinkage perpendicular to grain
23 NLT
24 NLT Samuel Brighouse Elementary Perkins + Will Canada
25
26
27 NLT SFU UniverCity Childcare Hughes Condon Marler Architects
28
29 Overview Products
30 Overview GLT Glue Laminated Timber
31 GLT Alternative Names: System: Suppliers: Basic Info: glued edge laminated timber, edge laminated timber, edge-lam glulam beams on edge Structurlam (Penticton), Western Archrib (Edmonton), Nordic (Montreal) or any other glulam supplier - material/fibre: S-P-F / D. Fir / Black Spruce / - harvesting cycle: 80 years - adhesive: Phenol Resorcinol (black) or Melamine (clear) - adhesive amount: 1% by weight - floor, roof (and wall) with Plywood sheathing for lateral loads
32 GLT Comments: Standardized product
33 GLT
34 GLT Comments: Standardized product Requires care with regards to swelling / shrinkage perpendicular to grain
35 GLT
36 GLT Comments: Standardized product Requires care with regards to swelling / shrinkage perpendicular to grain Glulam beam GLT
37 GLT
38 GLT
39 GLT Slave Lake Government Centre Manasc Isaac Architects
40
41 GLT Kin Centre Arena Complex PBK Architects
42
43 Overview Products
44 Overview CLT Cross Laminated Timber
45 CLT Alternative Names: System: Suppliers: Basic Info: cross laminated timber, x-lam cross laminated timber panels 2x members glued together Structurlam (Penticton, BC), Nordic (Montreal, QC), Smartlam (Whitefish, MT) - material/fibre: S-P-F / Black Spruce - harvesting cycle: 80 to 100 years - adhesive: Polyurethane - adhesive amount: 4% by weight - floor, roof and wall with joints detailed for lateral loads
46 CLT Comments: Standardized product
47 CLT
48 CLT Comments: Standardized product Dimensionally very stable
49 CLT
50 CLT Comments: Standardized product Dimensionally very stable Two directional span capabilities
51 CLT
52 CLT Wayne Gretzky Centre Courtesy of Structurlam Products
53 Courtesy of Structurlam Products
54 CLT District 03 Courtesy of Nordic
55 Courtesy of Nordic
56 Overview Products
57 Overview Solid LSL Laminated Strand Lumber
58 Solid LSL Alternative Names: System: Suppliers: n/a laminated strand lumber (timber strands glued together) *Weyerhauser, Louisiana Pacific, Basic Info*: - material/fibre: Aspen - harvesting cycle: 60 to 70 years - adhesive: MDI - Isocyante - adhesive amount: 6% by weight - floor, roof and wall with joints detailed for lateral loads (limited thicknesses!)
59 Solid LSL Comments: Standardized product
60 Solid LSL
61 Solid LSL Comments: Standardized product Dimensionally relatively stable
62 Solid LSL
63 Solid LSL Gilmore SkyTrain Station Perkins + Will Canada
64
65 Solid LSL False Creek Community Centre Henriquez + Partners Architects
66 Overview Products
67 Overview Solid LVL Laminated Veneer Lumber
68 Solid LVL Alternative Names: System: Suppliers: Microlam, Versalam laminated veneer lumber (veneers stacked & glued together) Louisianan Pacific*, Weyerhaeuser, Boise Cascade, West Fraser, Metsawood Basic Info*: - material/fibre: D. Fir - harvesting cycle: 80 years - adhesive: Phenol Formaldehyde - adhesive amount: 7% by weight - floor, roof and wall with joints detailed for lateral loads (limited thicknesses!)
69 Solid LVL Comments: Standardized product
70 Solid LVL
71 Solid LVL Comments: Standardized product Dimensionally relatively stable (can add cross layers)
72 Solid LVL
73 Solid LVL
74 Solid LVL
75 Overview Products
76 Overview Brisco Fine Line LVL Laminated Veneer Lumber
77 Brisco Fine Line LVL Alternative Names: System: Suppliers: Basic Info: N/A laminated veneer lumber (veneers stacked & glued together) Brisco - material/fibre: D. Fir - harvesting cycle: 80 years - adhesive: Phenol Formaldehyde - adhesive amount: 7% by weight - floor, roof and wall with joints detailed for lateral loads
78 Brisco Fine Line LVL Comments: Standardized product
79 Brisco Fine Line LVL
80 Brisco Fine Line LVL Comments: Standardized product Dimensionally relatively stable
81 Brisco Fine Line LVL Courtesy of Brisco
82 Courtesy of Brisco
83 Courtesy of Brisco
84 Courtesy of Brisco
85 Overview Products
86 Overview WCC Wood Concrete - Composite
87 WCC Alternative Names: System: Timber Concrete Composite Solid wood panel at bottom, concrete over top (acting as one unit) Base layer can be nearly any solid wood panel Connector supplied by wood panel supplier or general contractor Free, stiff and strong diaphragm
88 Overview OTHERS PSL (Parallam) Solid Decking / T&G Logs
89 Sizes and Design Characteristics
90 Sizes and Design Characteristics Depth
91 Sizes and Design Characteristics Width
92 Sizes and Design Characteristics Length 16m (50 ) to 20m (66 ) basic transportation length
93 Comparison
94 Comparison Stiffness Design is mostly governed by deflection (stiffness) and / or vibration
95 Stiffness DARK COLOR = DEPTH LIGHT COLOR = RELATIVE STIFFNESS
96 Comparison Fire In general, all products have a similar char rate Approximately 38mm 44mm / 60 minutes - Check with Code Consultant Be careful with CLT if required rating is between 45 and 90 minutes - Most of the time it s not a problem for panels with 5+ layers
97 Fire
98 Fire
99 Fire
100 Practical Considerations
101 Practical Considerations Location
102 Location Local trades Distance to suppliers (LEED, Living Building Challenge) Dry vs. wet climate Funding Season of construction (winter prefab)
103 Practical Considerations Size of a Project
104 Size of Project Sole Sourcing / Suppliers capacity Sequencing on Site / Staging Procurement
105 Practical Considerations Procurement
106 Procurement Design - Bid - Build Construction Management Design Build?
107 Depth 6m FLOOR SPAN 220mm 260mm 5m FLOOR SPAN 160mm 200mm 4m FLOOR SPAN 110mm 150mm DEPTHS ACCOUNT FOR VIBRATION
108 Practical Considerations Decide Early
109 Decide Early Use the product to its fullest extent possible Work with supplier Economical solution
110 Practical Considerations BIM
111 BIM CNC fabrication requires 3-D files Architectural 3-D models (REVIT) are not compatible with fabrication models 3-D shop drawing model including connections Successful projects using prefabricated systems rely heavily on integrated design (including fabricator & installer) and 3-D computer models to detect potential conflicts and fabrication/installation issues early in the process
112 Practical Considerations Movement
113 Practical Considerations Movement NLT, GLT: 0.25% change in dimension for each 1% change in moisture content 12%MC when installed 14%MC during construction 50mm swelling in 10m *38mm each 6m (1 ½ each 20 )
114 Practical Considerations Connections Wall Floor Wall Wall Wall Foundation
115 Practical Considerations Connections
116 Practical Considerations Connections Galvanized or otherwise protected steel parts and fasteners to deal with moisture:
117
118 Mass Timber Design Process Case studies as a means to introduce concepts, uses and challenges: Case 1: Athabasca University Academic Research Ctr. Case 2: Mountain Equipment Co-op Head Office
119 Case Study One Athabasca University
120 Design
121
122
123
124
125
126
127 Nail Laminated
128 Nail Laminated Standard & locally available Prefabrication Aesthetics Low-skilled labour Integrates mechanical & electrical systems
129
130 Tender & Construction
131
132
133
134
135
136
137
138
139 Case Study Two Mountain Equipment Co-op
140
141 Design
142
143
144
145
146 NLT CLT
147 Tender 2x8 solid wood NLT panels 2x10 panels at snow drift zones and green roof Random stack pattern for long span ½ plywood and topping One hour fire rating (including char reduction)
148 Construction
149
150
151
152
153
154
155
156
157
158
159 The Future of Mass Timber
160 The Future Innovative Products + Applications
161 The Future Innovative Products + Applications
162 The Future Procurement TIME SAVINGS TRADITIONAL DESIGN SHOP DRAWINGS FABRICATION INSTALLATION DESIGN ASSIST DESIGN SHOP DRAWINGS FABRICATION INSTALLATION DESIGN DEVELOPMENT CONTRACT DOCUMENTS TENDER + CONSTRUCITON PRE-TENDER
163 The Future Tall(er) Wood Buildings
164
165 CONCEPT App Idea calculator for architects Member calculator Material gallery
166 CONCEPT App Depth Calculator
167 CONCEPT App Depth Calculator Results
168 CONCEPT App Material Gallery
169 CONCEPT App Material Gallery
170 CONCEPT App Available on itunes or visit for more information
171 Thank You Vancouver Edmonton Frankfurt
Mass$Timber$Building$Systems:$ Understanding$the$Op9ons$
Mass$Timber$Building$Systems:$ Understanding$the$Op9ons$ Presented(on(January(27 th,(2015(by(bernhard(gafner( P.Eng.,(MIStructE,(C.Eng.,(Dipl.Ing.(FH/STV( ( Disclaimer: This presentation was developed
Mass(Timber(Building(Systems:( Understanding(the(Op:ons(
Mass(Timber(Building(Systems:( Understanding(the(Op:ons( & Fast&+&Epp& & & & Presented&on&December&9 th,&2015&by&ian&boyle& P.Eng.,&Struct.Eng.,&PE,&SE& & Disclaimer: This presentation was developed by
designing the tallest mass timber building in the world
designing the tallest mass timber building in the world Fast + Epp structural engineers Tanya Luthi, P.E. Northeast Mass Timber Symposium November 16, 2017 Disclaimer: This presentation was developed by
Today s agenda 1/30/2017. Mass timber What is it products Why use it appeal How does it work design topics Where is it used case studies What s next?
Please add relevant logo here Introduction to Mass Timber Buildings Copyright Materials This presentation is protected by US and International Copyright laws. Reproduction, distribution, display and use
RESOURCE AND SUPPLY CHAIN CONSIDERATIONS FOR MASS TIMBER
Photo Credit: D. R. Johnson Brian Brashaw, Program Manager Forest Products Marketing Unit USDA Forest Service RESOURCE AND SUPPLY CHAIN CONSIDERATIONS FOR MASS TIMBER My Forest Products Story As a youth
Sustainable Design and The Future with Wood Products
Sustainable Design and The Future with Wood Products Sustainable Design Philosophy Sustainable design implies responsibility and it implies far-reaching respect for natural systems and resources, respect
CLT in the U.S. Manufacturing and Applications
CLT in the U.S. Manufacturing and Applications Presented by Quinn Guerrero Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board. The
Mid-Rise Engineering Considerations for Engineered Wood Products
Mid-Rise Engineering Considerations for Engineered Wood Products Presented by Frank Powell, P.E. Presented by [ Presenter s Name ] Please add relevant logo here Disclaimer: This presentation was developed
structural design of mass timber framing systems
structural design of mass timber framing systems nwwood design symposium -seattle davin lewis, p.e., p.eng. fast +epp july19, 2018 Disclaimer: This presentation was developed by a third party and is not
structural design of mass timber framing systems
structural design of mass timber framing systems midwest wood solutions fair tanya luthi, p.e. fast +epp Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the
Structural Composite Lumber (SCL)
Prefabricated Wood I-Joists Structural Composite Lumber (SCL) Laminated Veneer Lumber (LVL) Parallel Strand Lumber (PSL) Laminated Strand Lumber (LSL) Oriented Strand Lumber (OSL) Other EWP Products Plywood
Fast + Epp structural engineers Tanya Luthi, P.E.
Fast + Epp structural engineers Tanya Luthi, P.E. Seattle Wood Solutions Fair April 25, 2017 Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood
Nail Laminated Timber
Nail Laminated Timber NAIL LAMINATED TIMBER, NLT, is a mass timber panel system and is used for floor, wall, and roof structure structural options. It is a good alternative to concrete slabs and steel
Attachment A. USG Minimum Design and Construction Requirements for Wood Framed Structures
Attachment A USG Minimum Design and Construction Requirements for Wood Framed Structures 1. General Design Criteria 1.1. Per Adopted Georgia State Minimum Standard Building Code 1.2. Minimum Live Loads
structural design of mass timber framing systems
structural design of mass timber framing systems northeast wood design symposium tanya luthi, p.e. fast +epp september26, 2018 Disclaimer: This presentation was developed by a third party and is not funded
Cathedral of Christ the Light Tour:! A!Case!Study!Brought!to!Life!
Cathedral of Christ the Light Tour:! A!Case!Study!Brought!to!Life! TUESDAY!DECEMBER!9,!2014! Disclaimer:+This+presenta1on+was+developed+by+a+third+party+and+is+not+ funded+by+woodworks+or+the+so=wood+lumber+board.!
Introducing the Design Guide for Nail-Laminated Timber Architectural Considerations SUBTITLE
NAILED IT! Introducing the Design Guide for Nail-Laminated Timber Architectural Considerations SUBTITLE Presented by Alex Minard, Architect AIBC, MRAIC, LEED AP BD+C, CPHD Disclaimer: This presentation
twelve wood construction: materials & beams ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture twelve wood construction: materials & beams Wood Beams 1 Wood Beam Design National Design Specification National
Mass Timber & Tall Wood Buildings
Mass Timber & Tall Wood Buildings XXII WESTFORD SYMPOSIUM - SUMMER CAMP, AUGUST 8, 2018 GRAHAM FINCH, MASC, P.ENG PRINCIPAL, SENIOR BUILDING SCIENCE SPECIALIST 1 Overview What is Mass Timber? Why Tall
SEAoO Scholarship Essay Cross-Laminated Timber 1. An Overview of Cross-Laminated Timber Trent Phillips University of Cincinnati
SEAoO Scholarship Essay Cross-Laminated Timber 1 An Overview of Cross-Laminated Timber Trent Phillips University of Cincinnati SEAoO Scholarship Essay Cross-Laminated Timber 2 An Overview of Cross-Laminated
VERTICAL MOVEMENT IN WOOD PLATFORM FRAME STRUCTURES: Basics FPINNOVATIONS
VERTICAL MOVEMENT IN WOOD PLATFORM FRAME STRUCTURES: Basics FPINNOVATIONS Acknowledgements The publication was developed by FPInnovations and Canadian Wood Council based on design and construction practice
thirteen wood construction: materials & beams ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2016 lecture
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2016 lecture thirteen wood construction: materials & beams Wood Beams 1 Wood Beam Design National Design Specification
DISTRICT 03: EASTERN CANADA'S FIRST 6- STOREY CLT BUILDING DAVID MIZRAHI, ENG. (ENSTIB, M.S.) DESIGN ENGINEER, NORDIC. Copyright Materials
: EASTERN CANADA'S FIRST 6- STOREY CLT BUILDING DAVID MIZRAHI, ENG. (ENSTIB, M.S.) DESIGN ENGINEER, NORDIC Copyright Materials This presentation is protected by US and International Copyright laws. Reproduction,
twelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2017 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
twelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2016 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
twelve wood construction: materials & beams Wood Beam Design Timber Wood Properties National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 20178 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood National
thirteen wood construction: materials & beams Timber Wood Beam Design Wood Properties
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2018 lecture thirteen wood construction: materials & beams Wood Beams 1 Wood National Design Specification f Wood
STRUCTURLAM CROSS LAMINATED TIMBER DESIGN GUIDE
STRUCTURLAM CROSS LAMINATED TIMBER DESIGN GUIDE Introduction Cross Laminated Timber (CLT) has been manufactured in Europe for over a decade. CLT is a revolutionary building system that substitutes for
twelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
WOOD I-JOIST AWARENESS GUIDE
WOOD I-JOIST AWARENESS GUIDE American Wood Council Flange Web Flange American Forest & Paper Association WOOD I-JOIST AWARENESS GUIDE The American Wood Council is part of the wood products group of the
Evaluation Report CCMC R Parallam PSL
Evaluation Report CCMC 11161-R Parallam PSL MasterFormat: 06 17 10 Evaluation issued: 1986-04-03 Re-evaluated: 2015-05-25 Revised: 2017-01-11 Re-evaluation due: 2017-06-14 1. Opinion It is the opinion
Joint Evaluation Report ICC-ES (800) (562)
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-3631 Reissued 09/2018 This report is subject to renewal 09/2019. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
LVL Product Guide 2.0E LVL 1.5E LVL
LVL Product Guide 2.0E LVL 1.5E LVL Our Company Anthony Forest Products Company, a family-owned business founded in 1916, is headquartered in El Dorado, Arkansas. The company operates a southern pine lumber
SECTION WOOD FRAMING. A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06110 WOOD FRAMING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But Not Supplied
Part 1: Vocabulary Select the best answer and write the corresponding letter in the space provided.
Name: Date: References: Architecture: Residential Drafting and Design (Chapter 18) at http://www.g wonlinetextbooks.com/. ***Use the classroom Username and Password to access the textbook, not your personally
Structural Design for Wind Loads: An Overview of Engineering Considerations for Wood
Structural Design for Wind Loads: An Overview of Engineering Considerations for Wood Lori Koch, PE Manager, Educational Outreach American Wood Council Buildings Copyright Materials This presentation is
Helping You Pick the Right Products and Fire Resistance Assemblies
Trafalgar Landing Great Gulf Homes Credit: H+ME Technologies Mid-rise Tips Helping You Pick the Right Products and Fire Resistance Assemblies Andy Teasell, P.Eng. National Manager ELP Design Services Weyerhaeuser
BROCK COMMONS PHASE 1
University of British Columbia Vancouver, B.C., Canada BROCK COMMONS PHASE 1 Brock Commons Phase 1 is an innovative tall wood student residence under construction at the University of British Columbia
Andy Teasell, P.Eng. Director, ELP Design Services Weyerhaeuser Canada
Trafalgar Landing Great Gulf Homes Credit: H+ME Technologies Mid-rise Tips Helping You Pick the Right Products and Fire Resistance Assemblies Andy Teasell, P.Eng. Director, ELP Design Services Weyerhaeuser
NORDIC ENGINEERED WOOD NON-RESIDENTIAL DESIGN CONSTRUCTION GUIDE NORDIC LAMTM FSC-CERTIFIED PRODUCTS AVAILABLE
NORDIC ENGINEERED WOOD NON-RESIDENTIAL DESIGN CONSTRUCTION GUIDE NORDIC LAMTM FSC-CERTIFIED PRODUCTS AVAILABLE BRINGING NATURE S RESOURCES HOME Nordic Engineered Wood was founded in the year 2000 to develop
2012 IBC Review of Height and Area Opportunities for Light-Frame and CLT
2012 IBC Review of Height and Area Opportunities for Light-Frame and CLT Michelle Kam-Biron, P.E., S.E., SECB Director of Education American Wood Council Outline 2012 IBC Heights and Areas Type III, IV,
SECTION WOOD FRAMING. A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06 1100 WOOD FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But
Introduction to Canadian Residential Construction CANADIAN HOUSING IS ADAPTABLE, FLEXIBLE AND ACCOMMODATES DIVERSE CLIMATES.
CANADIAN HOUSING IS ADAPTABLE, FLEXIBLE AND ACCOMMODATES DIVERSE CLIMATES Course Outline CANADA S CLIMATIC RANGES... 3 To understand the range of climates that exist in Canada... 3 CANADIAN HOUSING IS
Lintels and Beams Engineering basis
Lintels and Beams Engineering basis The calculator is intended for the design of lintels and beams in timber framed buildings generally within the scope of NZS 3604: 2011 Timber- framed buildings. However
The Tallest Wood Building in the World UBC Brock Commons Student Residence Base 3D Model to Product Delivery
The Tallest Wood Building in the World UBC Brock Commons Student Residence Base 3D Model to Product Delivery Kris Spickler, P.E. Principal Heavy Timber Group Inc Granite Bay, California Nicholas Sills,
DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: LAMINATED VENEER LUMBER REPORT HOLDER: REDBUILT LLC EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 299 Reissued 01/2019 This report is subject to renewal 01/2021. DIVISION: 06 00 00
Significant Changes to AWC s Special Design Provisions for Wind and Seismic
Significant Changes to AWC s Special Design Provisions for Wind and Seismic Michelle Kam-Biron, PE, SE, SECB Director of Education American Wood Council Copyright Materials This presentation is protected
LP OSB Sheathing & Structural 1 Sheathing
Rated OSB Sheathing Roof Panels Span Ratings Max. Live Load Thickness Span Rating for Roofs (lbs)** 3/8" 24/0 30 7/16" 24/16 40 15/32" 32/16 70 1/2" 32/16 70 19/32" 40/20 130 23/32" 48/24 175 1-1/8" 48
DECK PERMIT APPLICATION
DECK PERMIT APPLICATION APPLICANT S INFORMATION Name: Company Name: Current address: City: State: ZIP Code: Phone: Email: PROPERTY OWNER S INFORMATION Name: Property Address: Phone: E-mail: City: State:
Website Content: Trusses
Website Content: Trusses Trusses 101 (Information on what a truss is to someone who might not know) A truss is a manufactured component that acts as a structural support. It is composed of triangular units
DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: SHOP FABRICATED WOOD TRUSSES REPORT HOLDER: BARRETTE STRUCTURAL DISTRIBUTION, INC.
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 43 6587 (56) 699 0543 www.icc es.org ESR 999 Reissued 0/07 This report is subject to renewal 0/08. DIVISION: 06 00 00 WOOD, PLASTICS AND
Joint Evaluation Report
0 Joint Evaluation Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 ESR 1040 Reissued 09/2018 Revised 03/2019 This report is subject to renewal 09/2019. DIVISION: 06 00 00 WOOD, PLASTICS
PRESENTATION PLAN A MODEL COMPARISON FLOOR CONSTRUCTION
PRESENTATION PLAN A MODEL COMPARISON FLOOR CONSTRUCTION An overview of costing strategies for wood framed construction elements CREATING A PROJECT ENDLESS POSSIBILITIES COMPATORS LIST A FLOOR Cast in Place
The Structural Redesign of Boyds Bear Country and its Related Systems. Boyds Bear Country, Pigeon Forge, Tennessee
The Structural Redesign of Boyds Bear Country and its Related Systems Included in this Presentation: Background and Existing System Proposal Problem / Solution Structural System Redesigns Pre-cast Concrete
John Buddy Showalter, PE Vice President, Technology Transfer American Wood Council
2015 NDS Changes John Buddy Showalter, PE Vice President, Technology Transfer American Wood Council Michelle Kam-Biron, PE, SE, SECB Director of Education American Wood Council Copyright Materials This
Structural Engineered Wood Products in the Pacific Rim and Europe:
Structural Engineered Wood Products in the Pacific Rim and Europe: 2009 2013 The markets for laminated veneer lumber (LVL), laminated strand lumber (LSL), glue laminate beams (glulam) and I-joists are
Joint Evaluation Report
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1040 Reissued 09/2018 This report is subject to renewal 09/2019. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
Joint Evaluation Report
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1040 Reissued 09/2016 This report is subject to renewal 09/2018. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
solid advantages Cross laminated timber (CLT) offers a new building system option for non-residential and multi-family construction
solid advantages Cross laminated timber (CLT) offers a new building system option for non-residential and multi-family construction For decades, wood products have provided architects, engineers, contractors
The renaissance of our industry!
TM Canadian wood products and advanced building systems revolution or evolution? Chris Gaston, PhD Fall 2016 Overview Canadian fibre supply land base, production and trade End-use markets Lumber, wood
Lintels and Beams: Engineering Basis
Lintels and Beams: Engineering Basis The calculator is intended for the design of lintels and beams in timber- framed buildings generally within the scope of NZS 3604. However, the range of applications,
Structural Timber Systems
BUILDING SOLID! UTILIZING NEW WOOD TECHNOLOGIES San Francisco Wood Solutions Fair March 16, 2011 The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing
Modern-Day Timber Architects and Engineers: Design Skills for Mass Timber Buildings
Please add relevant logo here Modern-Day Timber Architects and Engineers: Design Skills for Mass Timber Buildings Mass Timber Code Applications and Acoustics Ethan Martin, PE WoodWorks Photo: Alex Schreyer
Tall Wall Applications Challenges. Products Design Considerations Framing Details Fire Assemblies Innovative Solutions. Residential Construction
Wood Framed Tall Walls July 2010 AIA Course WoodWorks is a Registered Provider with the American Institute of Architects t Continuing i Education Systems. Credit earned on completion of this program will
ADVANCED TIMBER STRUCTURES
ADVANCED TIMBER STRUCTURES INTRODUCTION ABOUT US DARING TO THINK DIFFERENTLY OUR JOURNEY IN TIMBER PERCEPTIONS OF TIMBER CONSTRUCTION? ENGINEERED TIMBER TYPES OF ENGINEERED TIMBER CLT MAKING THE PRODUCT
Plywood, Composite Wood Products, High-Pressure Laminates
Section 5 Plywood, Composite Wood Products, High-Pressure Laminates Contents 5.0.0 American Plywood Association (APA) grading guidelines 5.1.0 Plywood types and typical applications 5.1.1 APA-registered
DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: STRUCTURAL PANELS REPORT HOLDER: EVALUATION SUBJECT: STRUCTURAL PANELS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2182 Reissued 08/2018 This report is subject to renewal 06/2019. DIVISION: 06 00
December 1, 2014 PARTIES INTERESTED IN STRUCTURAL WOOD-BASED PRODUCTS
December 1, 2014 TO: PARTIES INTERESTED IN STRUCTURAL WOOD-BASED PRODUCTS SUBJECT: Proposed Revision to the ICC-ES Acceptance Criteria for Structural Wood-Based Products, Subject AC47-1214-R2-2 (JF/PC)
Detailing For Wood Shrinkage
Detailing For Wood Shrinkage Presented to: 2014 Texas Wood Solutions Fair Presented by: Doug Steimle Schaefer Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks
PFC-5804* Reissued February 1, Filing Category: DESIGN Wood
PFC-50* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 530 Workman Mill Road, Whittier, California 9001 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS PACIFIC
The Engineered Wood Association DESIGN/CONSTRUCTION GUIDE NONRESIDENTIAL ROOF SYSTEMS
A P A The Engineered Wood Association DESIGN/CONSTRUCTION GUIDE NONRESIDENTIAL ROOF SYSTEMS 1996 APA THE ENGINEERED WOOD ASSOCIATION ALL RIGHTS RESERVED. ANY COPYING, MODIFICATION, DISTRIBUTION OR OTHER
ICBO Evaluation Service, Inc Workman Mill Road, Whittier, California *Revised April 2003
PFC-5804* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS
Exposed Wood in Fire Resistive Applications
Please add relevant logo here Exposed Wood in Fire Resistive Applications David Barber, Arup Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood
eqcanada.com 1. Identifying the advantages and disadvantages of a variety of 2. Acquire current status of the joint Canada/US code
CLT Conference Solid Panel Construction and Design for Cost Effectiveness Seattle February 28, 2013 The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing
Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
Training Objectives Module A
Engineered Wood Products Simplified Module A Introduction to Engineered Wood Products New England Building Officials Education Associations 50 th Conference October 4, 2016 Robert A. Kuserk, PE Training
Commercialization of FRP reinforced glulam beam technology
Commercialization of FRP reinforced glulam beam technology Martin, Zeno A. 1, Stith, Joe K. 2, Tingley, Dan A. 3 ABSTRACT Thin laminates made of high-strength pultruded fiber reinforced polymers (FRP)
CH. 9 WOOD CONSTRUCTION
CH. 9 WOOD CONSTRUCTION PROPERTIES OF STRUCTURAL LUMBER Grading Load carrying capacity effected by: - Size and number of knots, splits & other defects - Direction of grain - Specific gravity of wood Grading
1¾" VERSA-LAM WESTERN HEAdER GuidE
1¾" VERSA-LAM 1.7 2400 WESTERN HEAdER GuidE for products manufactured in White City, Oregon 11/29/2012 1¾" 1.7 2400 VL Guide 2 VERSA-LAM Products 1¾" VERSA-LAM 1.7 2400 An Introduction to VERSA-LAM Products
Building Science. Intro Dr John Straube, P.Eng. Principal, RDH Building Science Assoc. Professor, University of Waterloo Waterloo, Canada
Dr John Straube, P.Eng. Principal, RDH Building Science Assoc. Professor, University of Waterloo Waterloo, Canada Building Science Intro à Building Science à Changes and Future Trends à Three topics à
Fundamentals of Wood Design and Engineering
Fundamentals of Wood Design and Engineering Session 3 Wood Design Introduction to Wood Engineering; Codes & Standards; Load combinations, weights of building materials and tributary area; Simple beam design:
2.2E Parallam PSL Deep Beam
#TJ-7001 SPECIFIER S GUIDE 2.2E Parallam PSL Deep Beam Featuring 20" 24" Deep Trus Joist Parallam PSL Beams Ideal for multi-family and light commercial applications Offers high strength and consistent
CLT - Research and Testing at UBC
UBC CLT - Research and Testing at UBC Frank Lam Professor and Senior Chair Wood Building Design and Construction Department of Wood Science, Faculty of Forestry University of BC February 8, 2011 CLT Symposium
SPECIFICATIONS Drawing Name: V:\Projects - Current\ J Small Projects - SEHS Womens Locker Room\2. Design\2.5 Design Phase\c. Construction D
SPECIFICATIONS Drawing Name: V:\Projects - Current\17-0715-04 4J Small Projects - SEHS Womens Locker Room\2. Design\2.5 Design Phase\c. Construction Documents\c. Working Drawings\Struc\SEHS WLR Struc Plan.dwg
Introducing TJ Insulated Structural Framing Components
#TJ-9009 SPECIFIER S GUIDE TJ INSULATED HEADERS, RIM BoaRD, AND CORNERS Introducing TJ Insulated Structural Framing Components Helps meet the 2011 Federal Energy Star Homes and 2009 International Energy
DIVISION 06 WOOD, PLASTICS, AND COMPOSITES
DIVISION 06 WOOD, PLASTICS, AND COMPOSITES 06 00 00 WOOD, PLASTICS, AND COMPOSITES 06 01 00 Maintenance of Wood, Plastics, and Composites 06 01 10 Maintenance of Rough Carpentry 06 01 10.71 Rough Carpentry
Introducing Cross Laminated Timber. Part 1: New Opportunities for Timber Construction
Introducing Cross Laminated Timber Part 1: New Opportunities for Timber Construction Presented By: Jeff Peters, P.E. April 5 th 2018 The Wood Products Council is a Registered Provider with The American
Wisconsin Timber Product Output
Wisconsin Timber Product Output March 15, 2018 Collin Buntrock Forest Products Specialist Wisconsin Department of Natural Resources ! Industry Snapshot! Primary wood-using industry consumption! Emerging
Building Enclosure Assemblies that Work for Taller Wood Buildings
Building Enclosure Assemblies that Work for Taller Wood Buildings GRAHAM FINCH, MASC, P.ENG - PRINCIPAL, BUILDING SCIENCE RESEARCH SPECIALIST RDH BUILDING ENGINEERING LTD., VANCOUVER, BC, CANADA Disclaimer:
ICC-ES Evaluation Report Reissued September 1, 2011 This report is subject to renewal in two years.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1336 Reissued September 1, 2011 This report is subject to renewal in two years. A Subsidiary of the International Code Council
Evaluation Listing CCMC L Nordic X-Lam
CONSTRUCTION Evaluation Listing CCMC 3654-L Nordic X-Lam Evaluation Issued: 203-2-24 Re-evaluation due: 206-2-24 Preface: Masterformat 06 9 00.02, Cross Laminated Timber (CLT) Panels (Standardized) Preface
Joint Evaluation Report ICC-ES (800) (562)
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1336 Reissued 09/2016 This report is subject to renewal 09/2018. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
Murphy LVL Limit States Design Guide 2.0 E-LVL 2.2 E-LVL
Murphy LVL Limit States Design Guide 2.0 E-LVL 2.2 E-LVL Our Company At Murphy Company we take pride in providing our customers with premium quality products and services. Our LVL is manufactured to provide
The renaissance of our industry!
TM Canadian wood products and advanced building systems revolution or evolution? Chris Gaston, PhD WOOD 465, January 2018 Overview Canadian fibre supply land base, production and trade End-use markets
DRY CONSTRUCTION SYSTEMS
DRY CONSTRUCTION SYSTEMS Adrienn LEPEL BUTE Dry construction systems Prefabricated elements assembly on site Minimal use of water dry construction systems Assembled partitions Suspended ceilings Raised
Chapter 23: Wood 2015 INTERNATIONAL BUILDING CODE COMMENTARY 23-1
Chapter 23: Wood General Comments This chapter contains information required to design and construct buildings or structures that include wood or wood-based structural elements, and is organized around
Recent UBC research activities on CLT and Glulam
UBC Recent UBC research activities on CLT and Glulam Frank Lam Professor and Senior Chair of Wood Building Design and Construction University of British Columbia August 19, 2013 2013 UBC-Tongji-CSRN Symposium,
CWC Publications, Software and Tools
CWC Publications, Software Kevin Rocchi, MASc., E.I.T. October 27 th 2015 Vancouver, BC Canadian Wood Council G063 CWC Publications, Software Kevin Rocchi, MASc., E.I.T. Technical Service Specialist Canadian
Structural Inspection
General: Background: An inspection and structural analysis have been performed for the purpose of evaluating the buildings structural systems and components. A full set of structural drawings was utilized
2.2E Parallam PSL Deep Beam
#TJ-7001 SPECIFIER S GUIDE 2.2E Parallam PSL Deep Beam Featuring 20" 24" Deep Trus Joist Parallam PSL Beams Ideal for multi-family and light commercial applications Offers high strength and consistent