Myers Hubs. Applications: Features: Standard Materials: Certifications and Compliances: Standard Finishes: Options: Conduit Hubs.
|
|
|
- Kellie Juliet Owens
- 6 years ago
- Views:
Transcription
1 pplications: Features: Certifications and Compliances: Standard Materials: Standard Finishes: Options: Description Suffix CP 56 US: CN: Copyright 2015 Commercial Products Catalog
2 B D F Design Features Vibration-proof - Strong, oversize nut with radial serrations assures fl ush installation and positive grounding. B Grounding Screw for added safety. Captive O-ring Gasket - Impervious to corrosive moisture and petroleum C products. Gasket assures positive water and dusttight installations. E C D E F Precision Machine Cut Threads - Positive fi t and simple installation. No Welding - Unique serrations on both nut and hub bite into metal, assuring a positive electrical ground. (UL approved for use with service entrance conduit). Posi-Lok Insulated Throat - Cannot come out. Standard in sizes from 1 /2 through 4. Hub Basic Scru-Tite Hubs are ideal for general use with rigid conduit. Provides positive seal and electrical ground. Ground Hub Combines all of the features of the Hub Basic Scru-Tite plus the additional feature of the grounding screw on the locknut. TEX Rated Hub Hub is listed for use in hazardous (classified) locations to IECEx/TEX certifications. Ideal for global requirements and OEMs shipping material worldwide. vailable in trade sizes 3 /8 through 6 vailable in trade sizes 1 /2 through 6 vailable in trade sizes 1 /2 through 4 Through-bulkhead Fitting Hubs are the perfect method for installing hubs on cast boxes or through thicker walls. Metric to NPT dapter Used to convert a threaded metric entry to an NPT entry. Drain Plugs Designed to install in the bottom of an enclosure to drain any accumulated condensation. vailable in aluminum or stainless steel construction. Cap-off Designed to install in enclosure to provide environmental cap for unused entries or knockouts. US: CN: Copyright 2015 Commercial Products Catalog
3 HUB BSIC SCRU-TITE NEM 2, 3, 3R, 4, 4X, 12 Zinc GROUND HUB NEM 2, 3, 3R, 4, 4X, 12 Zinc ST 03 ST 1 ST 2 ST 3 ST 4 ST 5 ST 6 ST 7 5 ST 8 ST 9 ST 10 ST 11* 5 ST 12* 6 HUB BSIC SCRU-TITE NEM 2, 3, 3R, 4, 4X, 12 luminum Grd. Wire STG 1 STG 2 STG 3 STG 4 55 STG 5 #6 STG 6 STG 7 5 #6 STG 8 #6 STG 9 #6 STG 10 STG 11* 5 STG 12* 6 GROUND HUB NEM 2, 3, 3R, 4, 4X, 12 luminum ST 1 ST 2 ST 3 ST 4 ST 5 ST 6 ST 7 5 ST 8 ST 9 ST 10 ST 11* 5 ST 12* 6 GROUND HUB NEM 2, 3, 3R, 4, 4X, Stainless Steel Grd. Wire STG 1 STG 2 STG 3 STG 4 STG 5 #6 STG 6 STG 7 5 #6 STG 8 #6 STG 9 #6 STG 10 STG 11* 5 STG 12* 6 SSTG 1 SSTG 2 SSTG 3 SSTG 4 5 SSTG 5 5 SSTG 6 5 SSTG 7 SSTG 8 SSTG 9 SSTG 10 US: CN: Copyright 2015 Commercial Products Catalog
4 TEX HZRDOUS LOCTION HUB WITH INCRESED SFETY GROUND TERMINL Zinc NEM 2, 3, 3R, 4, 4X; IP66 THROUGH-BULKHED FITTING ZINC STGK 1 STGK 2 STGK 3 STGK 4 5 STGK 5 5 #6 STGK 6 5 STGK 7 #6 STGK 8 #6 STGK 9 #6 STGK 10 TEX HZRDOUS LOCTION HUB WITH INCRESED SFETY GROUND TERMINL 316 Stainless Steel NEM 2, 3, 3R, 4, 4X; IP66 Grd. Wire Grd. Wire SSTGK 1 SSTGK 2 SSTGK 3 SSTGK 4 5 SSTGK 5 5 #6 SSTGK 6 5 SSTGK 7 #6 SSTGK 8 #6 SSTGK 9 #6 SSTGK 10 THROUGH-BULKHED FITTING LUMINUM THROUGH-BULKHED FITTING ZINC WITHOUT NIPPLES THROUGH-BULKHED FITTING LUMINUM WITHOUT NIPPLES STTB 1 5 STTB 2 5 STTB 3 5 STTB 4 5 STTB 5 5 STTB 6 5 STTB 7 STTB 8 STTB 9 STTB 10 STTB 1 5 STTB 2 5 STTB 3 5 STTB 4 5 STTB 5 5 STTB STTB 7 STTB 8 STTTB 1 5 STTTB 2 5 STTTB 3 5 STTTB 4 5 STTTB 5 5 STTTB 6 5 STTTB 1 5 STTTB 2 5 STTTB 3 5 STTTB 4 5 STTTB 5 5 STTTB US: CN: Copyright 2015 Commercial Products Catalog
5 METRIC TO NPT DPTER ZINC CP-OFF ZINC STM 1 STM 2 STM 3 STM 4 STM 5 STM 6 Note: METRIC TO NPT DPTER 316 STINLESS STEEL CP-OFF LUMINUM STC 1 STC 2 STC 3 STC 4 STC 5 STC 6 Note: NON-HZRDOUS DRIN PLUG 316 STINLESS STEEL SSTC 1 SSTM 1 SSTM 2 SSTM 3 SSTM 4 5 SSTM 5 5 SSTM 6 5 SSTC 1CD SSTC 1 SSTC 1CD NON-HZRDOUS DRIN PLUG LUMINUM GROUND NUT ZINC GROUND NUT LUMINUM STC 1 5 STC 2 STC 3 Grd. Wire STGN 1 6 STGN 2 STGN 3 STGN 4 STGN 5 #6 STGN 6 STC 1ST STC 1CD STC 1ST 6 STC 1CD Note: Grd. Wire STGN 1 STGN 2 STGN 3 6 STGN 4 STGN 5 #6 STGN 6 US: CN: Copyright 2015 Commercial Products Catalog
6 Hub Dimensions (in Inches): Pipe E K (Mounting Hole) B C D Min. Max. F G H Min. Max Bulkhead Dimensions (in Inches): B H M N H M B N US: CN: Copyright 2015 Commercial Products Catalog
7 Spacing Chart: Conduit or Pipe Cond. 1 /4 3 /8 1 /2 3 / /4 1 1 / / / Minimum space from center of pipe or conduit to nearest obstruction US: CN: Copyright 2015 Commercial Products Catalog
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels. Threaded stud and
1496-1497.qxp 12/16/2013 8:44 PM Page 1497 Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs
Cable Terminators COMMERCIAL AND INDUSTRIAL FITTINGS: RIGID AND IMC CONDUIT FITTINGS. Applications
Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Terminator The Terminator body is deep enough to provide an ample compound chamber
Red Dot. Rigid Fittings. Table of Contents
Table of Contents Conduit Unions Hazardous Locations... C2 C3 Conduit Fittings Hazardous Locations... C4 C5 Sealing Fittings Hazardous Locations... C6 C7 Conduit Hubs Raintight for Threaded Rigid Conduits...
TUFF-SEAL RSF SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSF Series Aluminum Flat Cable Cord Grips G 16
TUFF-SEAL RSF SERIES ALUMINUM CORD RIPS RSF Series Aluminum Flat Cable Cord rips Tuff Seal RSF Cord rips are specially designed for heavy-duty, flat cable or festoon system applications. Unique to the
Expansion & Deflection Fittings. SOLUTIONS for the Construction Industry
Expansion & Deflection Fittings SOLUTIONS for the Construction Industry TTINGS FI ST D LO C AF/AF8 SERIES e st d, in M a c h e d, As d in D e s i g n e d, b le the Casted Body with NPT hub size se m Ca
FS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
Service Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
Mogul Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
Applications To provide access to large and heavy conductors for pulling, splicing, maintenance and future changes / upgrades Allows connection of straight conduit runs, branch conduit runs and 90 bends.
TUFF-SEAL RSR SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSR Series Straight Aluminum Cord Grips G 1
TUFF-SEAL Toll Free -800-70-0975 Fax -800-892-660 COMPLETE ASSEMBLY PART NUMBERS RSR SERIES ALUMINUM CORD RIPS RSR Series Straight Aluminum Cord rips Tuff Seal RSR Series Aluminum Cord rips are UL Listed
TUFF-SEAL TM TECHNICAL REFERENCE SECTION
TUFF-SEAL TM TECHNOLOY TUFF-SEAL TM TECHNICAL REFERENCE SECTION OPERATIN TEMPERATURES Material Temperature range Aluminum -40 F to +300 F (-40 C to +149 C) Buna-N -40 F to +50 F (-40 C to +11 C) Nylon
TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD GRIPS. Toll Free Fax
Selection, Service & Quality Solutions TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD RIPS RSSS Series Stainless Steel Corrosion-Resistant Cord Connectors The Tuff Seal RSSS series of corrosion-resistant cord
Electrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
DIVISION 26 RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL RELATED DOCUMENTS
PART 1 - GENERAL 01.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification sections, apply to work of this Section.
Electrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
Specifications Electrical Metallic Tubing (EMT)
T& Fittings Specifications Electrical Metallic Tubing (EMT) Ref. CEC Rule 12-000 not exceeding 750 Volts Electrical Metallic Tubing (EMT) is similar to rigid steel conduit but is much lighter, weighing
Certificate of Compliance
Certificate of Compliance Certificate: 1731876 (078713_0_000) Issued to: Hawke International A Division of Hubbell Limited Oxford St W Ashton-Under-Lyne, Lancashire OL7 0NA UNITED KINGDOM Attention: Andy
T&B Fittings. Industrial Fittings. Liquidtight Flexible Metal Conduit Fittings. Specifications
T& Fittings Specifications Ref. E Rule 12-1300 Liquidtight flexible metal conduit is a raceway of circular cross section having an outer liquidtight nonmetallic, sunlight resistant jacket over a flexible
SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
Steel Octagon Boxes & Ceiling Pans
3 1 /4" ROUND CEILING PAN 4.0 CUBIC INCH CAPACITY 1 /2" DEEP CLAMPS IN BOTTOM TP266 Cat. # Cable Conduit Unit Qty. Wt. Lbs. Per 100 TP266 4 Cable 1 1 /2" 30 3 1 /4" OCTAGON OUTLET BOXES 9.0 CUBIC INCH
LARSON ELECTRONICS, LLC US-HWY 175 Kemp, Texas USA
LARSON ELECTRONICS, LLC. 99 US-HWY Kemp, Texas USA INSTALLATION, OPERATION & MAINTENANCE DATA SHEET For EPL-AEC Series Threaded Enclosures. For use in Class I, Groups B, C & D, Class II, Groups E, F &
Specifications Rigid Metal Conduit / PVC Coated Rigid Metal Conduit
Specifications Rigid Metal Conduit / PVC Coated Rigid Metal Conduit Ref. CEC Rule 12-1000 Rigid Metal Conduit affords maximum mechanical protection to conductors within the raceway. Rigid metal conduit
2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
TW Series THRU-WALL BARRIER Cable/Conduit Sealing Device
TW Series THRU-WALL BARRIER Applications: THRU-WALL BARRIER cable/conduit sealing device is used wherever there is a need to seal cables or conduits penetrating fireor non-fire-rated walls, ceilings, floors,
ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Greenbook Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 08-15-17 Rev. #06:
Thermocouple Heads. MOST POPULAR MODELS HIGHLIGHTED! To Order (Specify Model No.) B-9 76 (3) Model Price Material Type Number Each 48 (1 7 8)
Thermocouple Heads Dimensions: mm (in) MOST POPULAR MODELS HIGHLIGHTED! Model Price Material Type Number Each 48 ( 7 8) (3 3 8) 54 (2 8) NB-0 $23 Cast Iron NB NB-2 26 NB-4 28 92 (3 5 8) NB Cast Iron NB4
T&B Fittings. Industrial Fittings. Rigid Metal Conduit Fittings. Specifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit
Specifications Rigid Metal Conduit/PVC Coated Rigid Metal Conduit Ref. CEC Rule 12-1000 Rigid Metal Conduit affords maximum mechanical protection to conductors within the raceway. Rigid metal conduit can
1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED
LB57 1-1/2 LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category LB57 Appleton/Oz Gedney Conduit Body, Electro Zinc Plated Dichromate Epoxy Powder Coated
(For Vertical Conduit) ENY-2 (Fixture Hanger) (See Page L146) (Drain/Seal for Vertical Conduit)
EY SERIES ITTINGS SELING ITTINGS 45 ENY ENY with Nipple EY EY with Nipple (or Vertical Conduit) ENY-2 (ixture Hanger) (See Page L146) EYS EYS with Nipple with Nipple (Drain/Seal for Vertical Conduit) Class
SECTION CONDUITS AND BOXES PART 1- GENERAL. A. Work covered by this section includes the furnishing and installation of conduits and boxes.
SECTION 16111 CONDUITS AND BOXES 1.01 DESCRIPTION PART 1- GENERAL A. Work covered by this section includes the furnishing and installation of conduits and boxes. 1.02 SUBMITTALS A. The Contractor shall
DRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial
DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS
Unflanged Junction or Pull Boxes
UA12 Unflanged Junction or Pull Boxes Cast Iron Box For Surface Mounting - NEMA 4 Type YS Raintight - Watertight - Dust Tight UA12 Use: These boxes are general purpose enclosures listed by Underwriters
Service and installation must be performed by a trained/experienced service technician.
CATALOG DRAFT 09.18.2013 Service and installation must be performed by a trained/experienced service technician. All products used with combustible gas must be installed and used strictly in accordance
Index - Section 40M Medium Sump / Drainage Pumps Bulletins 4508
www.cranepumps.com Index - Section Medium Sump / Drainage Pumps Bulletins 4508 ITEM S Pump Specifi cations... Pump Assembly - Type A... Pump Assembly - Type B... Pump Data... 4 Dimensions - Simplex & Duplex...
Section 2 Index PAGE 2-I. Metal Sheath and Ceramic Thermocouple Assemblies. AccuTru Sensor Technologies 2-1. Spring Loaded Hex Nipple w/ Head 2-2
Section 2 Index Model Metal Sheath and Ceramic Thermocouple Assemblies Page I1 GTAW Welded Hex Nipple w/ Head 2-1 I2 Spring Loaded Hex Nipple w/ Head 2-2 I3 Spring Loaded Pipe Nipple w/ Head 2-3 I4 Nipple-Union-Nipple
Signal Framework. Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom. Signals. Overview.
Signal Framework Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom Cabinets Controllers Signals Signs Software Specialty Overview McCain s Signal Framework collection
Liquidtight Flexible Metal Conduit Fittings For Control and Power Cable Applications. * U.L. and CSA not applicable.
For Control and Power Cable Applications Hub Conduit Dimensions (in.) Cat. No. Size Size A B C 5229* 1/4 1/4 27/32 1-3/8 15/32 5330* 3/8 5/16 63/64 1-3/8 15/32 * U.L. and CSA not applicable. Steel, malleable
Extended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
SECTION A. Underwriters Laboratories, Inc., listed and NEC approved
PART 1 GENERAL 1.01 DESCRIPTION A. Provide all raceways, fittings, and boxes of specified type required for complete project. Install all systems in raceways unless specifically noted otherwise. Provide
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
iglide A181 Compliant with EC Directive 10/2011 EC FDA compliant Universally applicable Good media resistance Wear resistant
iglide 181 Compliant with EC Directive 10/2011 EC FD compliant Universally applicable Good media resistance Wear resistant 431 iglide 181 iglide 181 - FD and EC Directive compliant Food grade material
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
I-2 Unions, Sealing Fittings, Flexible Couplings, Elbows, Drain/Breather, Close-Up Plugs: Explosionproof UNILETS for Use with Threaded Metal Conduit
-2 Unions, Sealing Fittings, Flexible Couplings, Elbows, Drain/Breather, Close-Up Plugs: Explosionproof UNLETS for Use with Threaded Metal Conduit Applications: Unions UNY and UNF unions are used for joining
Dimensions in Millimeters (Inches) A Bushing Diameter. B Bushing Height
Insulated Grounding for Threadless and Threaded RM IM GI-LS- and I-LS- Series - with luminum Lay-In-Lug for opper or luminum onductors. NE/E: pplications GI-LS Series insulated bushings fasten and ground
Industrial Process Thermocouples
s ASE ETAL PROTECTION TUE ASSELY The TPT Style assemblies feature a base metal thermocouple and metal protection tube for use in corrosive or hostile environments. Optional mounting bushings and flanges
A. Product Data: For surface pathways, wireways and fittings, floor boxes, hinged-cover enclosures, and cabinets.
ALLIANT ENERGY CENTER PAVILIONS Project No. 2013 027 SECTION 27 05 28 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Thomas & Betts LT & CORD FITTINGS
Thomas & Betts LT & CORD FITTINGS Thomas & Betts Liquid Tight Sure Tight Gland Double Beveled Sealing Ring Safe Edge Ground Cone Threaded Connector Case Hardened Locknut 8Feature / Benefit Sure Tight Gland
Also available in Premium Finishes See submittal SUB for Premium Finishes
PM1 DUAL J TREE STRAP CATALOG NUMBER: LAMP(S): NOTES: Example PM1DJ - TS-20-1 - BZP - SC Series PM1DJ Mounting TS - Length Fixture Position - Tree Strap (Specify Adjustable Strap Length) Minimum 3" Adjustable
Procurement Services SVC East Fowler Avenue Tampa, Florida (813)
Procurement Services SVC 1073 4202 East Fowler Avenue Tampa, Florida 33620 (813) 974-2481 Web Address: https://www.usf.edu/business-finance/purchasing/public-bids/rfi.aspx October 12, 2018 Invitation to
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
RTDs. Offered by. Phone: (203) Fax: (203) Specialists in Valves, Controls, Pneumatics, Fluid Measurement
RTDs Offered by Phone: (203) 261-6711 Fax: (203) 261-8331 www.okcautomation.com Specialists in Valves, Controls, Pneumatics, Fluid Measurement NS RTD s I- Theory of Operation n RTD s basis of operation
2. Fittings shall be threaded and finished similar to conduit. Threadless fittings shall not be used.
SECTION 16110 RACEWAYS AND FITTINGS 1.00 RACEWAYS: All wiring shall be in raceways. Raceways shall be run in slabs, walls, above ceilings or exposed as indicated on drawings. Acceptable raceway and their
Raceway Solutions TM. Conventional Underfloor Duct. Multi-Compartment Conventional Duct Saves Time and Money in Your In-Slab Wire Management System
Multi-Compartment Conventional Duct Saves Time and Money in Your In-Slab Wire Management System The Raceway Solutions System is an in-slab wire management product for delivering power, voice and data services
Switch Rack Assemblies
Switch Rack Assemblies Applications: Free-standing switch rack assemblies are used: To provide a complete motor control center in one integrated package Outdoors and indoors In damp, wet or corrosive locations
EXPLOSION-PROOF MOTORS
Frames 143T~447TZ Horizontal Totally-Enclosed Fan-Cooled Explosion Proof Squirrel Cage Induction Motors Hazardous Locations, Div. I Class I: Group D Class II: Groups E, F & G CSA EPACT energy verification
3. Intermediate metal conduit (IMC). 4. Electric metallic tubing (EMT). 5. Flexible metal conduit (FLEX). 6. Polyvinyl chloride conduit (PVC).
SECTION 16111 CONDUITS PART 1 - GENERAL 1.01 DESCRIPTION A. General: Provide conduits, complete, as shown, specified or required per Contract Documents. Principal items include: 1. Rigid aluminum conduit.
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CONDUIT, FITTINGS, AND BODIES
Section 16111 PART 1 GENERAL 1.01 SUMMARY This Section covers the furnishing and installation of conduit, fittings and bodies. 1.02 MEASUREMENT AND PAYMENT Unless indicated in the Unit Price Schedule as
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
HEAVY DUTY BEVEL GEARBOX MODEL SB-V
FEATURES AND BENEFITS The SB-V series is suitable for use with Globe, Sluice and Knife Gate type valves and any other type requiring linear motion for thrust and torque applications Unique Top Entry replaceable
Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles. Compliance: CSA Listed. B Index. February Master Index. Cat. No.
FS and FD Cast Device Boxes: Malleable Iron, Aluminum B Features: Single-Gang Two-Gang Three-Gang Four-Gang Hubless Receptacles Compliance: CSA Listed B-2 B-3 FS and FD Cast Device Boxes: Index Page Description
Hazardous Location Cable Glands for Non-Armored Cable (Ex d/e/tb)
Spec-01168 Hazardous Location Enclosures Hazardous Location Enclosures and Accessories Hazardous Location Cable Glands for Non-Armored Cable (Ex d/e/tb) APPLICATION Hazloc cable glands provide strain relief,
Section 5 Panels & Accessories
Contents Section 5 Panels 74-76 Stiffener/Handle 79 Wire Mesh 75 Sliding Door Guide 80 Panel Mounting locks 77 Rolling Door Guide 81 Mesh Retainers 78 ifold Door Glide 82-83 Mesh Clamp 79 T-Clips 84 Panels
2016/17. hygienic product range brochure. the power in cable protection
WWW.FLEXICON.UK.COM 2016/17 hygienic product range brochure the power in cable protection Open to reveal more about our hygienic range Product Features & Benefits Introducing Flexicon s new range of hygienic
INDUSTRIAL TEMPERATURE SENSORS
Temperature s INDUSTRIAL TEMPERATURE SENSORS Temperature s APPLIED SENSOR TECHNOLOGIES A DIVISION OF UNITED ELECTRIC CONTROLS T E M P S E N S O R - B - 0 2 Temperature s Temperature s index Subject Page
Raceway and Boxes for Electrical Systems Page 1 of 7
Last Update: May 12, 2017 A. Conduits: Page 1 of 7 1. All conductors for each and every electrical system shall be installed in a raceway except communications and A/V systems which shall have stubs to
MATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR UNDERPASS LIGHTING
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 2434 November 2016 MATERIAL SPECIFICATION FOR HIGH PRESSURE SODIUM LUMINAIRES FOR UNDERPASS LIGHTING TABLE OF CONTENTS 2434.01 SCOPE 2434.02 REFERENCES
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
Standard Terminals and Splices
Standard s and Splices Product Facts MP solderless terminals and splices meet or exceed today s standards for reliable termination in applications ranging from control circuits to heavy duty power wiring
LBHF LBHS ATEX 94/9/EC GOST-R (RTR / RTN) GOST-K. Ex d IIC U DIP A21
OPEN BENDS AND PULLING BOXES Explosion Proof Electrical Equipment Ex Conduit fittings Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) Classification: Group II - Category 2G 2D
1510 RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 260533-RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section includes conduit raceways, and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and
SECTION OUTLET, PULL, AND JUNCTION BOXES
SECTION 16131 OUTLET, PULL, AND JUNCTION BOXES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09900 - Painting. 2. 16112 - Raceways and Conduits. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type Amphenol solder contact miniature cylindrical connectors meet the most critical application needs. esign versatility combined with high
Series Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
WATER METER SPECIFICATIONS
City of Langley WATER METER SPECIFICATIONS Page i January 2010 CONTENTS SECTION TITLE PAGE 1. Preamble 1 2. Definitions 1 3. Services to be Metered 2 4. Location of Meters 2 5. Meter Types 2 6. Registers
Youngstown State University
SECTION 260533 - RACEWAYS PART 1 - GENERAL SUMMARY A. This section includes raceways for electrical wiring. Types of raceways in this section include the following: 1. Flexible metal conduit 2. Liquid
AccuTru ExL High Temperature Thermocouples
S E N S O R T E C H N O L O G I E S AccuTru ExL High Temperature Thermocouples Dedicated to those organizations that value improved temperature measurement for critical processes S E N S O R T E C H N
10.1 APPLICATION 1 A. HOT PIPING 1 B. ANTI SWEAT PIPING 1 C. COLD PIPING FINISHES 2
SECTION 10: 10.1 APPLICATION 1 A. HOT PIPING 1 B. ANTI SWEAT PIPING 1 C. COLD PIPING 2 10.2 FINISHES 2 10.3 PIPING FORMAT 3 A. PIPE INSULATION 3 B. PIPE INSULATION 3 C. INSULATION ATTACHMENT 3 D. INSULATION
Miniature I/P, E/P Transducer
Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional
REA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
Combi climate glands. Product information 06/2009
Product information 06/2009 cable entry and ventilation in one degree of protection IP 66 / IP 67 for metric knockouts Gustav Hensel GmbH & Co. KG Industrial Electrical Power Distribution Systems Altenhundem
Overview Steel City. Metallic Boxes and Covers. Advantages of Steel City. Boxes and Covers. Boxes & Covers Steel City Metallic Boxes
Steel City Metallic Boxes and Covers Steel City is the industry-leading product line of metallic switch and outlet boxes used in electrical construction. Since 1904, Steel City products have symbolized
Varec 3500B, 3600B and 3650B Series Weight Loaded Vacuum or Pressure Relief Valves. 3500B Series
Varec 00B, 00B and 0B Series Weight Loaded or Pressure Relief Valves The 00B, 00B and 0B vacuum breakers are designed to provide superior seat tightness while protecting liquid storage vessels, vapor recovery
Customer Owned Meter Enclosures for Self-Contained Watthour Meters
Revision No. 4 Page 1 of 15 SPECIFICATION Page 2 of 15 RECORD OF SPECIFICATION APPROVALS: This Specification is approved for the inclusion of subject products on the Florida Meter Group s Approved Metering
SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 26 05 33 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes conduit and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and handholes.
EXBLT Series for Harsh and Hazardous Environments
EXBLT Series for Harsh and Hazardous Environments OSUR CL HA ES EN KILLARK Z LO C EXBLT SERIES JUNCTION BOXES Predrilled internal mounting pan bosses as standard. Uses same mounting pans as the EXB series
SECTION ELECTRICAL SYSTEM RACEWAY and BOXES
PART 1 GENERAL 1.1 SECTION INCLUDES A. Metal conduit B. Flexible metal conduit C. Liquid tight flexible metal conduit D. Electrical metallic tubing E. Non-metallic conduit F. Fittings and conduit bodies
G-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
Thermocouples W A T L O W
W A T L O W General Applications Over 90 years of manufacturing, research and design makes Watlow a world class supplier of temperature measurement products. We have designed and manufactured millions
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
PERMANENT PAVEMENT REPAIR NO SCALE
SAWCUT EXISTING PAVEMENT 2" BITUMINOUS CONCRETE SURFACE COURSE, CLASS 2 (MIN) CLEAN EDGE PRIOR TO PAVING AND PAINT WITH LIQUID BITUMEN. INSTALL SEALANT OVER JOINT UPON COMPLETION 2" BITUMINOUS CONCRETE
SANDELIUS INSTRUMENTS, INC.
SNDEIUS INSTRUMENTS, INC. To order any style on this page see below: Sandelius Style H Nipple-Union-Nipple (For spring-loading, insert an S in front of the style number) MET SHETHED OR INSUTOR TYPE EEMENT
AGRO cable glands. Customised solutions as individual as our customers
AGRO cable glands Customised solutions as individual as our customers AGRO cable glands the all-rounders. Our standard range of cable glands is designed to provide ideal cable entry solutions for standard
Anderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
SECTION CONDUITS AND BOXES
PART 1 GENERAL 1.01 DESCRIPTION A. Work covered by this section includes the furnishing and installation of conduits and boxes and the testing of the completed electrical systems 1.02 SUBMITTALS A. The
Certificate of Compliance
Certificate of Compliance Certificate: 2700364 (078713_0_000) Issued to: Hawke International A Division of Hubbell Limited Oxford St W Ashton-Under-Lyne, Lancashire OL7 0NA UNITED KINGDOM Attention: Roger
In-Ground LED Light Installation Guide
TM PROFESSIONAL GRADE LED LIGHTING www.aspectled.com Copyright 2012-2016. aspectled, Inc. 1 OVERVIEW In-ground high power LEDs can be mounted in-ground or in-wall. These are available in Ultra Bright and