Architectural Shapes. Expanded Polystyrene (EPS) Architectural Design LEADING THE INDUSTRY IN EPS MANUFACTURING

Transcription

1 Architectural Shapes Expanded Polystyrene (EPS) Architectural Design LEADING TE INDUSTRY IN EPS MANUFACTURING

2 Architectural Shapes Expanded Polystyrene (EPS) From columns to arches, cornices to window surrounds, high performance Foam-Control EPS shapes have unlimited design possibilities and are used in Stucco and Exterior Insulation and Finish Systems (EIFS). Our Foam-Control EPS fabrication technology solves many construction and design challenges, in addition to adding beauty to both residential and commercial buildings. AC simplifies the design and estimating process by utilizing innovative computerized technology to accurately design and fabricate Foam-Control EPS for your project. Standard and custom EPS shapes are produced with precision and consistency to shorten lead times. All of our Foam-Control EPS Architectural Shapes are manufactured with high performance EPS. Material can be manufactured in a variety of densities to meet the needs of your project. Foam-Control EPS meets tough exterior wall specifications and has been used in the construction industry for over 30 years. Foam-Control EPS is the preferred substrate for all Stucco and Exterior Insulation and Finish Systems (EIFS) because it combines unlimited design potential with material strength and durability. Catalogue Design Ideas This catalogue provides a few ideas for your project. Due to the unlimited design possibilities of Foam-Control EPS it is virtually impossible to represent every shape in one catalogue. Our highly skilled and dedicated staff will assist you with your design and shape ideas. EPS Compatibility Foam-Control EPS is approved by numerous acrylic, modified and portland cement based Stucco and EIFS products. Consult AC Foam Technologies for more information. The following systems are listed by the EIFS Industry Members Association (EIMA): Polymer Modified Mineral Combination Systems (PM) Acrylic and Mineral Combination Systems Polymer Base (PB) Acrylic Systems Mineral Base (MB) Cementitious Systems Strong and Lightweight Design Foam-Control EPS can be specified in densities from 1 to 3 pounds per cubic foot. Very little weight is placed on a building, frequently eliminating the need for additional structural reinforcements.

3 Types of Shapes Attachment and Finishing Foam-Control EPS can be adhesively or mechanically attached to a variety of substrates and provides excellent surface bonding for base coats. Consult your Stucco or EIFS manufacturer for installation procedures. Design & Estimating Foam-Control EPS Architectural Shapes can be easily estimated and designed. Simple information such as overall height and width, in addition to any other pertinent interior dimensions will be needed for an estimate. All other interior dimensions will be scaled proportionately. Please contact your local design estimator for more information. Columns Caps Bases Sills all Caps Bands Cornices Arches Keystones & Quoins Spheres Reveals Logos & Signage 3-D Shapes Available Upon Request Benefits Unlimited Design Potential Durable & Lightweight Vapor Permeable Easily Modified Excellent Surface Bonding igh R-Value Environmentally Friendly Environmentally Friendly EPS contains no CFC s, CFC s, FC s or formaldehyde. It is chemically inert and safe to TE systems and landfills. e encourage you to recycle. Quality Assurance Recommendations Refer to local building codes for compliance information. Termite Resistant SG EPS Every AC plant has a quality assurance program, monitored by Underwriters Laboratories (UL). A quality control manual is retained for inspection by code personnel and is verified by continuous in-plant material testing and independent laboratory sample testing. This procedure allows AC to provide certified/code listed EPS products to the wall industry. AC Foam Technologies Foam-Control EPS Architectural Shapes can be provided with Perform Guard, a proven and safe additive that effectively resists termites. Custom Shapes Not Shown in this Catalogue are Available Upon Request Building Codes & Standards Please refer to ICC-ES ESR-1006 and ASTM Designation C578 for more information about building codes and industry standards. Get Green. Go hite.

4 Cornices RAD LL CAPS / BANDS / CORNICES BANDS / CORNICES SDM-1 SDM-15 SDM-17 SDM-25 SDM SDM SAPES SDM-14 SDM-15 SDM-17 SDM-25 SDM-24 SDM SAPES SDM-16 SDM-14 SDM-15 SDM-17 SDM-25 SDM SAPES SDM-16 SDM

5 L SILLS 405 / ALL CAPS / / CAPS / BANDS / CORNICES SILLS SILLS / ALL / ALL CAPS CAPS / BANDS / BANDS / CORNICES / Bands RAD RAD SDM-21A SDM-22B SDM-23 SDM RAD. RAD. RAD.

6 Sills RAD. SILLS / AL SIL RAD RAD RAD. SILLS / ALL CAPS / BANDS / CORNIC

7 CAPITALS AND BASES ITALS AND BASES CAPITALS AND BASES Caps & Bases ITALS AND BASES 100 CAPITALS AND BASES TALS AND BASES CAPITALS AND BASES CAPITALS AND BASES 112 CAPITALS AND BASES

8 all Caps & Columns all Caps Columns 200 -A 200-A -A A 200 FLUTED FLUTED COLUMNS / TAPERED A FLUTED COLUMNS / TA 201 -A 201-A A 201-A A FLUTED COLUMNS / TAPERED -A -A FLUTED COLUMNS / -A FLUTED COLUMNS / TAPERED -A A A 154 -A A A 201 -A 201-A

9 04-A 04-A Tapered FLUTED COLUMNS Columns FLUTED COLUMNS / TAPERED / TAPERED -A FLUTED COLUMNS / TAPERED -A FLUTED COLUMNS / TAPERED A -A -A -A

10 Arches, Keystones & Spheres O ARC INDO ARC TK. KEYSTONES TK. ARC NOPY ARC 160 KEYSTONES TK. KEYSTONES 163 TK. INSIDE CANOPY ARC TK. OPY ARC SPERE ANOPY ARC NOPY ARC OUTSIDE CANOPY ARC SPERE SPERE

11 Specification Quality Assurance All Foam-Control EPS products are made to the exacting standards of our industry-leading Quality Control Program, monitored by Underwriters Laboratories Inc (UL) and recognized by national code and regulatory organizations. Physical Properties of Expanded Polystyrene Property ASTM Test Type I Density, minimum lb/ft³ (kg/m³) C 303/D (15) 1.15 (18) 1.35 (22) 1.80 (29) 2.40 (38) R-Value* 1.00 in. (25.4 mm) thickness, minimum F ft² h/btu (K m²/) Compressive Resistance at yield or 10% deformation, whichever occurs first (with skins intact), minimum psi (kpa) C 177/C at 40 F (4.4 C) at 75 F (23.9 C) C 165/D (69) Flexural Strength, minimum psi (kpa) C (173) ater Vapor permeance of 1.00 inch (25.4 mm) thickness, max. perm (ng/pa s m²) ater Absorption by total immersion, maximum volume % Dimensional Stability (change in dimensions), maximum % Type VIII (90) 30.0 () Type II (104) 40.0 (276) Type IX (173) 50.0 (345) Type XIV NA 40.0 (256) 60.0 (414) E (287) 3.5 (201) 3.5 (201) 2.5 (115) 2.5 (115) C D Oxygen Index, minimum % D Maximum Use Temperatures Continuous Exposure Intermittent Exposure Fungus & Bacterial Resistance F F FA Test Procedure ill not support bacterial fungus. No food value. Bouyancy-Floatation lb./cu. ft 60 lbs/cubic foot *See ASTM C-578 Standard Specification for complete information. Get Green. Go hite.

12 Plant Locations Corporate Office 8 Turnpike Drive, Suite estminster, CO Phone Fax Toll-Free Colorado 5250 North Sherman Street Denver, CO Phone Fax Toll-Free Georgia 2731 hite Sulphur Road Gainesville, GA Phone Fax Toll-Free Kansas 1 Kaw Drive Kansas City, KS Phone Fax Toll-Free Kansas 1 North 3rd Street Kansas City, KS Phone Fax Toll-Free Iowa 809 East 15th Street ashington, IA Phone Fax Toll-Free Nevada Mt. Anderson Street Reno, NV Phone Fax Toll-Free Utah 111 est Fireclay Avenue Murray, UT 84 Phone Fax Toll-Free isconsin 90 Trowbridge Drive Fond du Lac, I Phone Fax Toll-Free isconsin 1739 Fox Ridge Drive Fond du Lac, I Phone Fax Toll-Free Get Green. info@achfoam.com Go hite. Copyright 2010 AC Foam Technologies. All rights reserved. Printed in USA. Rev: ARC01-10/17