Scope. Notes. Details
|
|
- Dwayne Griffin
- 6 years ago
- Views:
Transcription
1 Water Filtration Plant Improvements Category: Water and Sewage Treatment Plants Project ID #: Street Address: 1268 Poquonnock Rd. Groton CT Staff Estimate Value $300, County: New London Stage: Biddate Set Bid Date: 10/12/2016, 11:00AM Architect: Documents Available: Plans, Specs available in Insight Plans available from Stantec Consulting Services Last Update: 9/21/2016 Banton Construction Co. was added as a bidder Notes Scope Notes Details Site work and renovation of a water / sewer project in Groton, Connecticut. Completed plans call for the renovation of a water / sewer project. At the Groton Utilities Water Filtration Plant, the project includes improvements to the existing water filtration plant including but not limited to the following: installation of the electrical service to the plant; new emergency generators; New Dissolved Air Flotation (DAF) clarification process; new Granular Activate Carbon (GAC) Filters; new building to house the DAF/GAC Filters, conversion of existing filters to manganese contactors, installation and replacement of finished water pumping systems, intermediate pumping/backwash systems, residuals pumping systems, and manganese contactor lift pumping; yard piping improvements; new finished water storage tanks; renovations to the existing facilities; and miscellaneous site improvements. The project also includes an in-tank aeration system at the Bailey Hill water storage tank located in the Town of Groton out in the distribution system. The Owner's contract manager is Raymond Valentini, 1240 Poquonnock Road, Groton, CT 06340, (860) , valentinir@yurservice.com. All questions concerning the Specifications and Drawings shall be ed to Cristina Crespo, at cristina.crespo@stantec.com with a copy to Raymond Valentini, at valentinir@yurservice.com no later than 3:00 PM on October 3rd, Federal Minimum Wage Rates (Davis-Bacon), including reporting requirements as determined by the United States Department of Labor under the Davis-Bacon Act apply to this project. The right is reserved to waive any informalities in or to reject any or all bids received and to award the Contract to any of the contractors bidding on the work if, in the Owner's opinion, the best interests of the Owner thereby will be promoted. The goals for this project are a minimum o f 3.0 percent MBE participation and 5.0 percent WBE participation Development include(s): Site Work, Renovation Bid Date: 10/12/ :00AM Sealed bids will be received and opened at the Owner at the Project Management Office of Groton Utilities, 1240 Poquonnock Road, Groton, Connecticut, Mandatory Pre-Bid Meeting: 09/07/ :00PM A mandatory pre-bid conference will be held at the Groton Utilities Water Filtration Plant, 1268 Poquonnock Road, Groton, CT, 06340, to review the work.all bidders are strongly encouraged to attend. A guided site visit will be held immediately following the meeting meeting. [Division 2]: Hazardous Material Abatement, Dewatering, Earthwork, Grading, Slope Protection & Erosion Control, Piles & Caissons, Paving & Surfacing, Water Systems, Sewerage & Drainage, Landscaping. [Division 3]: Concrete Formwork, Concrete Reinforcement, Structural Concrete, Architectural Concrete, Post-Tensioned Concrete, Structural Precast Concrete, Cementitious Decks. [Division 4]: Clay Unit Masonry, Concrete Unit Masonry. [Division 5]: Structural Steel, Metal Fabrications, Metal Stairs, Metal Railings. [Division 6]: Rough Carpentry, Finish Carpentry. [Division 7]: Waterproofing, Insulation, Firestopping, Manufactured Roofing & Siding, Skylights. [Division 8]: Metal Doors, Coiling Doors and Grilles, Entrances & Storefronts, Metal Windows, Hardware, Glass & Glazing. [Division 9]: Ceiling Suspension Systems, Stucco, Drywall/Gypsum, Tile, Acoustical Ceilings, Resilient Flooring, Carpet, Painting. [Division 10]: Visual Display Boards, Compartments & Cubicles, Louvers & Vents, Lockers, Protective Covers, Postal Specialties, Partitions, Storage Shelving, Toilet & Bath Accessories. [Division 11]: Audio-Visual Equipment, Water Supply/Treatment Equipment, Fluid Waste Treatment/Disposal Equipment, Laboratory Equipment. [Division 12]: Manufactured Casework, Window Treatment, Furniture. [Division 13]: Ground Storage Tanks. [Division 14]: Elevators, Material Handling Systems. [Division 15]: Mechanical Insulation, Plumbing Piping, Plumbing Fixtures, Water Heaters, Hydronic Piping, Steam & Steam Condensate Piping, Boilers, Heat Pumps, Packaged A/C Units, Air Handling, Ductwork, Testing & Balancing. [Division 16]: Service/Distribution, Interior Lighting, Standby Power Generator Systems, Lightning Protection Systems, Alarm & Detection Systems, Television Systems. Additional Details Listed On: 8/31/2016 Floor Area: Contract Type: Work Type: Alteration Stage Comments 1: Floors Below Grade: Stage Comments 2: Owner Type: City Bid Date: 10/12/2016 Mandatory Pre Bid Conference: 9/7/2016 Invitation #: W16-1-1, , a Commence Date: 11/10/2016 Structures: 1 Completion Date: 10/19/2019 Report Date: 10/3/ :04:22 PM 2016 ConstructConnect. All Rights Reserved. Page 1 of 2
2 Single Trade Project: Floors: Parent Project ID: Parking Spaces: Site Area: LEED Certification Intent: Units: Project Participants Company Role Civil Engineer Owner Company Name Stantec Consulting Services Groton City Dept of Utilities Contact Name Barry Souibe Ray Valentini Address 5 Burlington Woods Suite 210, Burlington, MA Poquonnock Rd, Groton, CT Phone (781) (860) Fax (203) Bidders Company Added Name Date Daniel O'Connell's 9/16/20 Sons, Inc Eastern Massachusetts Office Banton 9/21/20 Construction Co. 16 Address Phone 1000 Franklin (508) 520- Village Drive, Suite , Franklin, MA Washington (203) 234- Ave, North Haven, 2353 CT rhanson@oconnel ls.com Bidding Role General Contractor General Contractor Bid Rank Bid Value Fax Fax Number (508) (203) Contracts Classification General Contractor Conditions Bonding Bid:5.00%,Perf: % Bid Date Bids To Bid Type 10/12/2016 Owner Open Bidding History User Viewed First Viewed Date Currently Tracked? Adam Sweet True 9/2/2016 False Date Tracked Report Date: 10/3/ :04:22 PM 2016 ConstructConnect. All Rights Reserved. Page 2 of 2
3 2 FOS, DOUBLE WALL MECHANICAL KEY NOTES: SH U T-O FF VALVE 2 FOR, DOUBLE WALL NEW FUEL OIL TANK, FILL PIPE AND VENT. REFER TO SPECIFICATION SECTION FACILITY FUEL OIL PIPING FOR ADDITIONAL REQUIREMENTS. PROVIDE 2 FOS/FOR DOUBLE-CONTAINMENT PIPING BETWEEN MAIN TANK AND GENERATOR ENCLOSURES. INSTALL PIPING UNDER SHIPS LADDER, 9 FT ABOVE GROUND. SUPPORT AS REQUIRED. 4 VENT CONNECT FOS/FOR TO GENERATOR ENCLOSURE AT SIDEWALL. CONTRACTOR SHALL COORDINATE LOCATION WITH GENERATOR MANUFACTURER. DAY FILL MANWAY TANK, FUEL OIL PUMPS, AND PIPING WITHIN THE ENCLOSURE SHALL BE PROVIDED BY GENERATOR MANUFACTURER. GENERATOR ENCLOSURE. REFER TO SPECIFICATION SECTION PACKAGED ENGINE GENERATORS FOR REQUIREMENTS. PROVIDE PIPE SUPPORT IN ACCORDANCE WITH FILE NAME: U :\ \s \w g g ro to n \P la n s\c A D D \0 6 _ M e chanical\w G M d w g LAYOUT NAME: M-404 PLOTTED: Thursday, August 25, :49am USER: hfriberg ANTI-SIPHON VALVE 10,000 GAL FUEL OIL TANK FOOT VALVE 3 = * 3 1 NO. DATE BY CHK D REVISION SITE PLAN SCALE: 3 = 1-0 STANTEC PROJ. NO.: DATE: AUGUST 2016 SCALE: 3 = T - 0 ELEVATION SCALE: 3 = 1-0 CAD RLE NO.: DESIGNED BY: DRAWN BY: CHECKED BY: APPROVED BY: NEW WORK ACCESS MANHOLE CONNECT FOS/FOR TO GENERATOR PITCH FUEL OIL PIPING WITH BOLTED COVER TOWARDS LOW POINT FOR LEAK DETECTOR 2 VENT SENSOR INSTALLATION ENCLOSURE AT SIDEWALL CONTRACTOR SHALL COORDINATE LOCATION WITH GENERATOR MANUFACTURER. DAY TANK, FUEL OIL PUMPS, AND PIPING WITHIN THE ENCLOSURE SHALL BE PROVIDED BY GENERATOR MANUFACTURER W G -045-M -404.dw g JCP MDK AAH CCY no & 1 FOS/FOR, DOUBLE WALL ftî*84«4 / PREPARED BY: V, GROTON UTILITIES GENERATOR ENCLOSURE (2 TYP.) GROTON UTILITIES 295 MERIDIAN STREET PROTON, CONNECTICUT on [ f m * * 5 BURLINGTON WOODS ( stantec bu -ma0,803 m m W MSS 58 8c M S S -127 (TYPICAL). REMOTE ANNUNCIATOR LEAK DETECTION AND MONITORING PANEL, PROVIDE WEATHER RESISTANT NEMA 4X ENCLOSURE. REFER TO ELECTRICAL DRAWINGS. PROVIDE UNISTRUT SUPPORT. PROVIDE SECONDARY CONTAINMENT PIPE LEAK DETECTION SYSTEM. PITCH PIPING TOWARDS LOW POINT FOR SENSOR INSTALLATION. PROVIDE LEAK DETECTION SYSTEM FOR STORAGE TANK. CONNECT PIPE AND TANK LEAK DETECTION SENSORS TO REMOTE ANNUNCIATOR PANEL. GROTON UTILITIES WATER FILTRATION PLANT IMPROVEMENTS STANDBY GENERATOR AND RELATED WORK DRAWING NO. M o f 501
4 E. Comply with ASMEB31.9, "Building Services Piping," for fuel-oil piping materials, installation, testing, and inspecting. F. Comply with requirements of the EPA and of state and local authorities having jurisdiction. Include recording of fuel-oil storage tanks and monitoring of tanks and piping DELIVERY, STORAGE, AND HANDLING A. Lift and support fuel-oil storage tanks only at designated lifting or supporting points, as shown on Shop Drawings. Do not move or lift tanks unless empty. B. Deliver pipes and tubes with factory-applied end caps. Maintain end caps through shipping, storage, and handling to prevent pipe end damage and to prevent entrance of dirt, debris, and moisture. C. Store pipes and tubes with protective PE coating to avoid damaging the coating and to protect from direct sunlight. D. Store PE pipes and valves protected from direct sunlight PROJECT CONDITIONS A. Interruption of Existing Fuel-Oil Service: Do not interrupt fuel-oil service to facilities occupied by Owner or others unless permitted under the following conditions and then only after arranging to provide temporary fuel-oil supply according to requirements indicated: 1. Notify Owner no fewer than two days in advance of proposed interruption of fuel-oil service. 2. Do not proceed with interruption of fuel-oil service without Owner s written permission COORDINATION A. Coordinate sizes and locations of concrete bases with actual equipment provided WARRANTY A. Special Warranty: Manufacturer s standard form in which manufacturer agrees to repair or replace components of fuel-oil storage tanks and flexible, double-containment piping and related equipment that fail in materials or workmanship within specified warranty period. 1. Storage Tanks: a. Failures include, but are not limited to, the following when used for storage of fuel oil at temperatures not exceeding 150 deg F: 1) steel tanks. Water Filtration Plant Improvements Facility Fuel-Oil Piping DWSRF No a Page 5 of 23 August 2016
5 b. Warranty Period: 30 years from date of Substantial Completion. 2. Flexible, Double-Containment Piping and Related Equipment: a. Failures due to defective materials or workmanship for materials installed together, including piping, dispenser sumps, entry boots, and sump mounting adapters. b. Verify available warranties and warranty periods for units and components with manufacturers listed in Part 2 articles. c. Warranty Period: 30 years from date of Substantial Completion. PART A. PRODUCTS DOUBLE-CONTAINMENT PIPE AND FITTINGS Flexible, Double-Containment Piping: Comply with UL Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: a. Environ Products, Inc. b. OPW. c. Or Equal 2. Pipe Materials: PVDF complying with ASTM D 3222 for carrier pipe with mechanical couplings to seal carrier, and PE pipe complying with ASTM D 4976 for containment piping. 3. Provide flexible double containment piping at connection to enclosures and tanks. 4. Fiberglass or PE sumps. 5. Watertight sump entry boots, pipe adapters with test ports and tubes, coaxial fittings, and couplings. 6. Minimum Operating Pressure Rating: 10 psig. 7. Plastic to Steel Pipe Transition Fittings: Factory-fabricated fittings with plastic end matching or compatible with carrier piping, and steel pipe end complying with ASTM A 53/A 53M, black steel, Schedule 40, Type E or S, Grade B. 8. Retain subparagraph below if double-containment piping will have cable leakdetection system installed in annular space. Water Filtration Plant Improvements Facility Fuel-Oil Piping DWSRF No a Page 6 of August 2016
6 9. Include design and fabrication of double-containment pipe and fitting assemblies with provision for field installation of cable leak-detection system in annular space between carrier and containment piping. B. Rigid, Double-Containment Piping: Comply with UL Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: a. Ameron International; Fiberglass Pipe Group. b. Conley Corporation. c. Perma-Pipe, Inc. d. Smith Fibercast. 2. RTRP: ASTM D 2996 or ASTM D 2997 carrier and containment piping and mechanical couplings to seal carrier and containment piping or individually bonded joints. a. Minimum Operating-Pressure Rating for RTRP NPS 2 and NPS 3 (DN 50 and DN 80): 150 psig. b. Fittings: RTRF complying with ASTM D 2996 or ASTM D 2997, and made by RTRP manufacturer; watertight sump entry boots, termination, or other end fittings. 3. Include design and fabrication of double-containment pipe and fitting assemblies with provision for field installation of cable leak-detection system in annular space between carrier and containment piping PIPING SPECIALTIES A. Flexible Connectors: Comply with UL Metallic Connectors : a. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: 1) American Flexible Hose Co., Inc. 2) Flexicraft Industries. 3) FLEX-ING, Inc. 4) Hose Master, Inc. 5) Metraflex Company (The). Water Filtration Plant Improvements DWSRF No a Facility Fuel-Oil Piping Page 7 of August 2016
7 3. NPS 2: Maximum span, 10 feet; minimum rod size, 3/8 inch. 4. NPS 2-1/2: Maximum span, 11 feet; minimum rod size, 1/2 inch. 5. NPS 3: Maximum span, 12 feet; minimum rod size, 1/2 inch. 6. NPS 4: Maximum span, 13 feet; minimum rod size, 5/8 inch. C. Support vertical steel pipe at each floor and at spacing not greater than 15 feet LIQUID-LEVEL GAGE SYSTEM INSTALLATION A. Install liquid-level gage system. Locate panel inside building where indicated LEAK-DETECTION AND MONITORING SYSTEM INSTALLATION A. Install leak-detection and monitoring system. Install alarm panel inside building where indicated. 1. Double-Wall, Fuel-Oil Storage Tanks: Use factory-installed integral probes in interstitial space. 2. Double-Containment, Fuel-Oil Piping: Install leak-detection sensor cable probes in interstitial space of double-containment piping. 3. Install liquid-level gage CONNECTIONS A. Install piping adjacent to equipment to allow service and maintenance. B. Install unions, in piping NPS 2 and smaller, adjacent to each valve and at final connection to each piece of equipment having threaded pipe connection. C. Install flanges, in piping NPS 2-1/2 and larger, adjacent to flanged valves and at final connection to each piece of equipment having flanged pipe connection. D. Connect piping to equipment with ball valve and union. Install union between valve and equipment. E. Install flexible piping connectors at final connection to burners or oil-fired appliances that must be moved for maintenance access LABELING AND IDENTIFYING A. Nameplates, pipe identification, and signs are specified in Section "Identification for HVAC Piping and Equipment." B. Equipment Nameplates and Signs: Install engraved plastic-laminate equipment nameplates and signs on or near each service regulator, service meter, and earthquake valve. Water Filtration Plant Improvements Facility Fuel-Oil Piping DWSRF No a Page 19 of August 2016
8 C. Tests and Inspections : 1. Tanks: Minimum hydrostatic or compressed-air test pressures for fuel-oil storage tanks that have not been factory tested and do not bear the ASME code stamp or a listing mark acceptable to authorities having jurisdiction: a. Single-Wall Tanks: Minimum 3 psig and maximum 5 psig. b. Double-Wall Tanks: 1) Inner Tanks: Minimum 3 psig and maximum 5 psig. 2) Interstitial Space: Minimum 3 psig and maximum 5 psig, or 5.3- in. Hg vacuum. c. Where vertical height of fill and vent pipes is such that the static head imposed on the bottom of the tank is greater than 10 psig, hydrostatically test the tank and fill and vent pipes to a pressure equal to the static head thus imposed. d. Maintain the test pressure for one hour. 2. Piping: Minimum hydrostatic or pneumatic test-pressures measured at highest point in system: a. Fuel-Oil Distribution Piping: Minimum 5 psig for minimum 30 minutes. b. Fuel-Oil, Double-Containment Piping: 1) Carrier Pipe: Minimum 5 psig for minimum 30 minutes. 2) Containment Conduit: Minimum 5 psig for minimum 60 minutes. c. Suction Piping: Minimum 20-in. Hg for minimum 30 minutes. d. Isolate storage tanks if test pressure in piping will cause pressure in storage tanks to exceed 10 psig. 3. Inspect and test fuel-oil piping according to NFPA31, "Tests of Piping" Paragraph; and according to requirements of authorities having jurisdiction. 4. Test liquid-level gage for accuracy by manually measuring fuel-oil levels at not less than three different depths while filling tank and checking against gage indication. 5. Test leak-detection and monitoring system for accuracy by manually operating sensors and checking against alarm panel indication. 6. Test and adjust controls and safeties. Replace damaged and malfunctioning controls and equipment. Water Filtration Plant Improvements Facility Fuel-Oil Piping DWSRF No a Page 22 of August 2016
Franklin Hall Renovation TABLE OF Document Indiana University Bloomington
VPS Project No. 2013022.00 Page 1 SPECIFICATIONS VOLUME I INTRODUCTORY INFORMATION Document 000010 - Table of Contents... 6 Document 000011 - Certification and Seals... 2 Document 000012 - Project Directory...
More informationSERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS
SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS INDIANA UNIVERSITY BIDDING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 (REVISED 2005) MINORITY,
More informationDIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT
TABLE OF CONTENTS INTRODUCTORY INFORMATION 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Notice to Bidders
More informationDivision 00 Procurement and Contracting Requirements
SECTION 00 01 10 TABLE OF CONTENTS Division SECTION NO. VOLUME ONE Title SECTION TITLE Division 00 Procurement and Contracting Requirements 00 11 00 Invitation to Bidders 00 21 00 Instructions to Bidders
More informationTABLE OF CONTENTS Public Safety Building
DOCUMENT 00 01 10 - TABLE OF CONTENTS VOLUME I DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 10 Table of Contents 00 31 32 Geotechnical Data DIVISION 01 GENERAL REQUIREMENTS 01 10 00 Summary
More informationDIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT
TABLE OF CONTENTS INTRODUCTORY INFORMATION 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Notice to Bidders
More informationAdam Sweet 2KGAL DW AST DUAL FUEL STORAGE TANK FOR A GENERATOR - NO DRAWINGS 5/9/2017 False
Above Ground Concrete Encased Fuel Storage Tank System Category: Tanks Project ID #: 1004373561 Street Address: To Be Announced Woodstock CT Staff Estimate Value $60,000.00 06281 County: Windham Stage:
More informationA. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems:
SECTION 221429 - SUMP PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationInvitation to Bid. RLS Construction Group requests your firm to submit a quotation on the following project:
RLS CONSTRUCTION GROUP Phone: 717-502-6680 Fax: 717-502-6681 www.rlscg.com Invitation to Bid RLS Construction Group requests your firm to submit a quotation on the following project: Project: Location:
More informationADDENDUM 2 - JULY 14, 2015
7/9/2015 The Professional(s) of Record above has signed for the following specification sections: DIVISION 1 GENERAL REQUIREMENTS Section 01 10 00 Summary of Work Section 01 25 00 Substitution Procedures
More informationFRANKLIN VILLAGE APARTMENTS Building I Franklin Street Morristown, NJ Block: 3901 Lots: 4,5,6
PROJECT MANUAL for: FRANKLIN VILLAGE APARTMENTS Building I Morristown, NJ 07960 Block: 3901 Lots: 4,5,6 Owner: Atlantic Health Investment Corp. 200 American Road Morris Plains, NJ 07950 Architect NETTA
More informationLEVEL TWO NUMBERS AND TITLES. Introductory Information. Bidding Requirements. Contracting Requirements. Facilities and Spaces. Systems and Assemblies
MasterFormat LEVEL TWO NUMBERS AND TITLES Introductory Information 00001 Project Title Page 00005 Certifications Page 00007 Seals Page 00010 Table of Contents 00015 List of Drawings 00020 List of Schedules
More informationPROCUREMENT AND CONTRACTING DOCUMENTS GROUP
PROCUREMENT AND CONTRACTING DOCUMENTS GROUP DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 00 11 00 Notice To Bidders 00 21 00 Instructions To Bidders 00 22 00 Supplementary Instructions To Bidders
More informationDALLAS-FORT WORTH INTERNATIONAL AIRPORT
DALLAS-FORT WORTH INTERNATIONAL AIRPORT ADDENDUM NO. 2 TO THE REQUEST FOR BIDS Contract No. 9500445 Restroom Rehabilitation at Terminal B (Phase 3 & 4) December 20, 2010 THE REQUEST FOR BIDS (RFB) FOR
More informationPrequalification Form
1.0 General Information Date: 1.1 Name of Firm _ County Telephone Toll Free Fax Website _ for Bid Purposes: Name Phone 1.2 Legal Identity: Sole Proprietorship Partnership Corporation Limited Liability
More informationProject Manual Index of Specifications Shenandoah Schools Concession Building
INDEX OF SPECIFICATIONS Division 0..BIDDING AND CONTRACT REQUIREMENTS 00 11 13 Advertisement for Bids 00 21 13 Instructions to Bidders 00 41 00 Bid Forms 00 43 13 Bid Security Form 00 72 00 General Conditions
More informationDESIGN & CONSTRUCTION GUIDELINES
DESIGN & CONSTRUCTION GUIDELINES EDITION: USF FACILITIES MANAGEMENT - DC 5 DCG FACILITIES MANAGEMENT DESIGN & CONSTRUCTION PHONE: (813) 974-2845 4202 E. FOWLER AVENUE, OPM 1000 TAMPA, FLORIDA 33620-7550
More informationTable of Contents. Division 2 Site Work Site Preparation Site Demolition Tree Protection Excavation, Trenching, and Backfilling for Utilities
Division 1 Requirements Design and Construction Quality Campus Master Plans Texas Tech University System Operating and Building Maintenance Project Administration Historically Underutilized Business (HUB)
More informationTABLE OF CONTENTS Updated 1/2014 SECTION TITLE DATE
TABLE OF CONTENTS SECTION TITLE DATE Division 00 Procurement and Contracting Requirements 000101... Project Title Page 000116... CAD Standards 001116... Invitation to Bid 002113... Instructions to Bidders
More informationAPPLICATION AND CERTIFICATE FOR PAYMENT
AND CERTIFICATE FOR PAYMENT TO OWNER: MASTER TEMPLATE - SAVE PROJECT FILE 1 DATE: 10/5/2012 PERIOD TO: ARCHITECT: PROJECT NO: CONTRACTOR'S FOR PAYMENT Application is made for payment, as shown below, in
More informationCM ASSIGNMENT OF TEMPORARY FACILITIES see included IU Project Site Requirements
SECTION A CM INSTRUCTIONS TO BIDDERS SECTION B BID CATEGORY DESCRIPTIONS & BID FORMS BC-07: Building HVAC and Plumbing BC-08: Building Electric BC-09: General Trades BC-10: Masonry BC-11: Precast Structural
More informationDIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT
TABLE OF CONTENTS INTRODUCTORY INFORMATION 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Notice to Bidders
More informationTABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS
AIA General Conditions... GC-1 to GC-44 Amendments to General Conditions... AM-1 to AM-2 Supplements to General Conditions... SU-1 to SU-7 00200 Instructions To Bidders... 1 3 00201 Contractor s Bidding
More informationCSO / BSU NW2 NORTH RESIDENTIAL NEIGHBORHOOD PHASE #2 VOLUME 1 PROCUREMENT AND CONTRACTING DOCUMENTS GROUP
VOLUME 1 PROCUREMENT AND CONTRACTING DOCUMENTS GROUP DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 01 Project Title Page 00 01 10 Table of Contents 00 01 15 List of Drawing Sheets 00 21
More informationA. Operation and Maintenance Data: For pumps and controls, to include in operation and maintenance manuals.
Page 221429-1 SECTION 221429 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationB. Wiring Diagrams: For power, signal, and control wiring.
Page 221429-1 SECTION 221429 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationDIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT
TABLE OF CONTENTS INTRODUCTORY INFORMATION Section 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Invitation
More informationEast Central College
SECTION 221116 - DOMESTIC WATER PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT
TABLE OF CONTENTS INTRODUCTORY INFORMATION Section 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Invitation
More informationADDENDUM NO Refer to Specifications Section Alternates. Clarifications to alternate descriptions are as follows:
ADDENDUM NO. 1 TO THE DRAWINGS AND SPECIFICATIONS FOR THE New Dishman-McGinnis Elementary School Bowling Green Independent Schools Bowling Green, Kentucky BG 12-256 RTA 1209 March 11, 2013 To All Plan
More informationTABLE OF CONTENTS. (Δ = Rev 06/08)
TABLE OF CONTENTS (Δ = Rev 06/08) INTRODUCTION REQUEST FOR REVISION FORMS TAB A TABLE OF CONTENTS TAB B PROCEDURES B-9 Record Drawings B-10 Variance Procedure B-11 Surface Water Procedures (New Section)
More informationWatercrest - Sand Hill - Columbia, SC TABLE OF CONTENTS PROCUREMENT AND CONTRACTING REQUIREMENTS
Watercrest - Sand Hill - Columbia, SC 00 0110-1 TABLE OF CONTENTS DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS INTRODUCTORY INFORMATION Document 00 0101 Document 00 0110 Project Title Page CONTRACTING
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationRIVERSIDE CHURCH OF CHRIST. Lafayette, LA
SECTION 000010 INVITATION FOR BIDS Bids for will be received in the office of Church Development Construction Services, 708 S. Rosemont Road, Suite #101,, until 12:00 noon Local Prevailing Time on Friday,
More informationSECTION The specification section is organized by placing information in three standard parts:
SECTION 14244 LIMITED USE HYDRAULIC ELEVATOR ***** Since 1982 Liftavator, Inc. has provided limited use/limited application (LU/LA) elevators, residential elevators, hydraulic vertical platform wheelchair
More informationKU West Campus LEEP II High Bay Facility Project # , A (c)
Number Revision Title Rev Date Discipline Bulletin Drawings B-West Structural Category S051 0 General Notes - Sheet 1 7/31/13 Structural Bid Package B- West Campus S052 0 General Notes - Sheet 2 7/31/13
More informationTABLE OF CONTENTS. (Δ = Rev 11/15) Update #7
TABLE OF CONTENTS ( = Rev 11/15) Update #7 INTRODUCTION REQUEST FOR REVISION FORMS TAB A TABLE OF CONTENTS TAB B PROCEDURES B-4 International Suite of Codes (New) B-9 Record Drawings B-10 Variance Procedure
More informationDOCUMENT B. 2. The low bidder shall submit this Expanded Subcontractors Listing to the Owner within 24 hours after the bid opening.
DOCUMENT 00 43 36B EXPANDED SUBCONTRACTORS LISTING TO: CLARK COUNTY SCHOOL DISTRICT hereinafter called "Owner" FROM: ~AU;)"''"-' Oeve\,(;p,-...e,.,,... IA... t. ~o~ t>.m..e>u,i-j (Print Company Name) Pe-Mo1..,,,-t,:;>.tJ
More informationTABLE OF CONTENTS. (Δ = Rev 04/17) Update #8
TABLE OF CONTENTS ( = Rev 04/17) Update #8 INTRODUCTION REQUEST FOR REVISION FORMS TAB A TABLE OF CONTENTS TAB B PROCEDURES B-4 International Suite of Codes B-9 As-Builts and Record Drawings B-10 Variance
More informationPAULDING COLLEGE & CAREER ACADEMY
PAULDING COLLEGE & CAREER ACADEMY 000110 OF THE PROJECT MANUAL FOR THE CONSTRUCTION OF: PAULDING COLLEGE & CAREER ACADEMY DALLAS, GEORGIA DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 000101 TITLE
More informationMinneapolis Community and Technical College T-Building Floor 2 Student Affairs Cost Estimating Form Templates - Exhibit C
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 43 44 45 46 DIVISION 02 EXISTING CONDITIONS Demolition; Removal & Disposal: CMU Partitions AD Quan UM
More informationADDENDUM NO. 2 Consisting of 3 pages and Attachments
10404-125 Street, Edmonton, AB. T5N 1T2 Tel: 780.455.5975 Fax: 780.454.2397 info@cdyarchitect.com ADDENDUM NO. 2 Consisting of 3 pages and Attachments PROJECT: Maina Centre Ville Phase II, Beaumont, Alberta
More informationEssex County College - West Essex Campus Addition And Renovations Dib # / SECTION DOMESTIC WATER PIPING SPECIALTIES
Essex County College - West Essex Campus Addition And Renovations Dib # 54292 / 11-14 SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationIssued for Bid West Alexandria, OH 05/2018 WWTP Improvements Contract 2 TABLE OF CONTENTS
669.7403.001 West Alexandria, OH 05/2018 WWTP Improvements Contract 2 TABLE OF CONTENTS Page C-111 Advertisement for Bids 1-2 C-200 Instruction to Bidders 1-10 C-410 Bid Form for Construction Projects
More information* Cost Code# * Description * Division 1100 Summary 1 - General Requirements 1200 Price and Payment Procedures 1 - General Requirements 1300
* Cost Code# * Description * Division 1100 Summary 1 - General Requirements 1200 Price and Payment Procedures 1 - General Requirements 1300 Administrative Requirements 1 - General Requirements 1400 Quality
More information2016 CDM Smith All Rights Reserved July 2016 SECTION MULTIPLE CONTRACT SUMMARY
PART 1 - GENERAL SECTION 01 01 11 MULTIPLE CONTRACT SUMMARY 1.01 SCOPE OF WORK A. This Section includes a summary of each Contract, including responsibilities for coordination and temporary facilities
More informationCAMPUS STANDARDS HANDBOOK
CAMPUS STANDARDS HANDBOOK OFFICE OF PHYSICAL PLANNING AND CONSTRUCTION UNIVERSITY OF CALIFORNIA, SANTA CRUZ Italics indicate recent revisions. THESE STANDARDS ARE PROVIDED TO UCSC CONSULTANTS FOR GUIDANCE
More informationVOLUME 4 DIVISION SPECIFICATIONS
Page 1 Section Title Consultant Pages VOLUME 4 DIVISION 00-01 SPECIFICATIONS Division 00 - Procurement and Contracting Requirements 00 01 07 SEALS PAGE All 5 00 01 11r6 TABLE OF CONTENTS All 7 00 21 13r1
More informationA. The work consists of furnishing a Chiller Noise Reduction System as listed in the specifications.
SECTION 32 31 14 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,
More information4.1.3 Project Manual
4.1.3 Project Manual (*Section requires Filed Sub-Bid) PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP Division 00 Procurement and Contracting Requirements Section 00 01 03 Project Directory Section 01
More informationSECTION AIR TERMINAL UNITS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
More informationProject Manual for the TCU ADDITION AND MEDICAL IMAGING RENOVATION. Lincoln, Nebraska. ESA Project No
Project Manual for the TCU ADDITION AND MEDICAL IMAGING RENOVATION Lincoln, Nebraska ESA Project No. 14518 May 15, 2018 SECTION 00 01 07 PROJECT DIRECTORY MADONNA TCU ADDITION & IMAGING RENOVATION ARCHITECT
More informationTABLE OF CONTENTS VOLUME 1. DIVISION 00 - INTRODUCTORY INFORMATION, BIDDING REQUIREMENTS, CONTRACT FORMS & CONDITIONS OF THE CONTRACT Pages
TABLE OF CONTENTS VOLUME 1 DIVISION 00 - INTRODUCTORY INFORMATION, BIDDING REQUIREMENTS, CONTRACT FORMS & CONDITIONS OF THE CONTRACT Pages SCHEDULE OF DRAWINGS...... 1 PROJECT PERSONNEL & DIRECTORY......
More informationSECTION ROOF MOUNTED ATTIC EXHAUST VENT
SECTION 07 72 00 ROOF MOUNTED ATTIC EXHAUST VENT **This is a CSI Three-Part Specification using CSI MasterFormat 2004-2010 Section Numbers and Titles. This specification must be edited to suit your particular
More informationCONCURRENT ADVERTISEMENT FOR SUBCONTRACTOR PREQUALIFICATION AND BIDS
CONCURRENT ADVERTISEMENT FOR SUBCONTRACTOR PREQUALIFICATION AND BIDS (August 28, 2018) PIERCE HALL IMPROVEMENTS PROJECT NO. 950511-950532 UNIVERSITY OF CALIFORNIA, RIVERSIDE PREQUALIFICATION PROCESS ALL
More informationINSPECTION TIMING CHECKLIST FOR RESIDENTIAL FRAME BUILDING PRIOR TO INSPECTION REQUEST
Village of Vernon Hills Community Development Department - Building Division 290 Evergreen Drive, Vernon Hills, IL 60061 Phone 847-367-3704 - Fax 847-367-2541 - http://www.vernonhills.org INSPECTION TIMING
More informationDIVISION 22 PLUMBING SECTION INTERIOR SANITARY WASTE AND VENT PIPING SYSTEM
DIVISION 22 PLUMBING PART 1 GENERAL 1.01 DESCRIPTION A. Provide a complete system of soil, waste, and vent piping to fixtures and equipment, including traps, floor drains and cleanouts, extending to a
More informationLEED TM POINT DOCUMENTATION
LEED TM POINT DOCUMENTATION 1100 SUMMARY LEED PROGRAM 1101 REQUIREMENTS 1125 SUMMARY OF MULTIPLE CONTRACTS WORK 1140 RESTRICTIONS 1210 ALLOWANCES 1230 ALTERNATES 1250 CONTRACT MODIFICATION PROCEDURES 1270
More informationSPARTANBURG COUNTY BUILDING CODES DEPARTMENT
SPARTANBURG COUNTY BUILDING CODES DEPARTMENT PLAN REVIEW CHECK LIST REQUIREMENTS FOR COMMERCIAL BUILDING PERMITS Plan Review Coordinator Kris Brannon 864-596-3180 366 N. Church St Room 500 Spartanburg,
More informationBus Facility
SECTION 32 31 13.53 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSchedule of Values Cruise Terminal 2 Expansion
Schedule of Values The Schedule of Values outlined below is intended to reflect the standard format that would be used in a Contractors Application for Payment. Values reflect materials and labor. General
More informationSOLICITATION ADDENDUM NO. 1 RFP THE FOLLOWING CHANGES TO THE ABOVE CITED SOLICITATION ARE ANNOUNCED.
Beaverton School District Capital Program Purchasing 16550 SW Merlo Road, Beaverton, OR 97006 Phone: 503-591-4539 SOLICITATION ADDENDUM NO. 1 RFP 15-0013 THE FOLLOWING CHANGES TO THE ABOVE CITED SOLICITATION
More informationTexas Tech University Health Sciences Campus - MSBII Supplemental Bid Instructions March 3, 2017
Texas Tech University Health Sciences Campus - MSBII Supplemental Bid Instructions March 3, 2017 Plumbing - 220000 Without limiting the application of all of the Contract Documents to the Subcontract,
More informationTHE UNIVERSITY OF ALABAMA AT BIRMINGHAM (UAB) BIRMINGHAM, ALABAMA
Print Form THE UNIVERSITY OF ALABAMA AT BIRMINGHAM (UAB) BIRMINGHAM, ALABAMA PROJECT NAME/NO: Bartow Arena Roof Replacement 617 13th Street South Birmingham, AL STANDING ADDENDUM NO. 1 MINORITY BUSINESS
More informationSECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT
SECTION 23 72 00 AIR-TO-AIR ENERGY RECOVERY EQUIPMENT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCONSTRUCTION DOCUMENTS CHECKLIST for the 2012 Michigan Building Code Including Building Permit Application Checklist
CONSTRUCTION DOCUMENTS CHECKLIST for the 2012 Michigan Building Code Including Building Permit Application Checklist This checklist is a convenient reference to the 2012 Michigan Building Code. The checklist
More informationInspection requests submitted by 2:30pm will be scheduled for the following business day unless otherwise requested.
Purpose 355 West Queens Road Single Family New Construction Required Inspection Stages Master Requirement GEN 110 Building Department: 604-990-2480, building@dnv.org, fax: 604-984-9683 The following procedure
More informationSection X - Miscellaneous
Section X - Miscellaneous A. Introduction This section provides design criteria, specific requests/recommendations and preferences related to specifying and constructing systems and materials used in HRSD
More informationSection 32 - Miscellaneous
Section 32 - Miscellaneous A. Introduction This section provides design criteria, specific requests/recommendations and preferences related to specifying and constructing systems and materials used in
More informationSECTION FACILITY SANITARY SEWERS
SECTION 22 13 13 FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationNorthwestern Facilities
Northwestern Facilities NU Master Specification - Issuances Record & Summary of Changes Only the most current version of an NU Master Specification is included as a PDF for download on this website. The
More informationA. Gravity-Flow, Nonpressure, Drainage-Piping Pressure Rating: 10-foot head of water (30 kpa).
SECTION 221313 - FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 02630 - STORM DRAINAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information1.5 Other than persons listed above, number of full-time office employees: 1.6 Number of full-time, permanent field employees:
1.4 Names of officers, owners, partners and principals. Identify relationship of each to firm and if active in firm: 1.5 Other than persons listed above, number of full-time office employees: 1.6 Number
More informationD-10 OUTLINE SPECIFICATION FOR PRE FAB Undergrd Piping System
D-10 OUTLINE SPECIFICATION FOR PRE FAB Undergrd Piping System PREFABRICATED CONDUIT PIPING SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationINFORMATIONAL HANDOUT FOR FINISHING A BASEMENT
7100 147 th Street West Telephone (952) 953-2588 Apple Valley, MN 55124-9016 Fax (952) 953-2515 www.cityofapplevalley.org INFORMATIONAL HANDOUT FOR FINISHING A BASEMENT 1. Submit plan showing the proposed
More informationSECTION GROUND STORAGE TANK
SECTION 13210 GROUND STORAGE TANK PART 1 GENERAL 1.01 Summary A. Section Includes: Provision for welded steel storage tank design, fabrication, construction and erection, including tank accessories. B.
More informationA. Piping materials shall bear label, stamp, or other markings of specified testing agency.
SECTION 221316- PART 1- GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe, tube, and fittings. 2. Specialty pipe fittings. 1.2 INFORMATIONAL SUBMITTALS A. Field quality-control reports. 1.3 QUALITY ASSURANCE
More informationSECTION TURBINE VENTILATORS
SECTION 07 72 00 TURBINE VENTILATORS **This is a CSI Three-Part Specification using CSI MasterFormat 2004-2010 Section Numbers and Titles. This specification must be edited to suit your particular project.
More informationSECTION MODULAR GALVANIZED RF SHIELDING SYSTEM SPECIFICATIONS
SECTION 13096 MODULAR GALVANIZED RF SHIELDING SYSTEM SPECIFICATIONS Prepared by: NELCO 125 Chenoweth Lane, Ste. 206 Louisville, KY 40207 (502) 899-3726 13096-1 MODULAR GALVANIZED RF SHIELDING SYSTEM PART
More informationBuilding Permit Application
Building Permit Application Administrative Use Only PARENT PERMIT NUMBER (Required if part of another project) PERMITTEE: PERMITTEE ADDRESS: E-MAIL ADDRESS: ARCHITECT/ENGINEER: ARCHITECT/ENGINEER ADDRESS:
More informationSECTION ENCLOSED BUS ASSEMBLIES
SECTION 262500 ENCLOSED BUS ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationPROJECT SPECIFICATIONS
PROJECT SPECIFICATIONS CITY OF PORTLAND BUREAU OF ENVIRONMENTAL SERVICES PROJECT SPECIFICATIONS FOR ANKENY PUMP STATION UPGRADE BES project number E07833 STANDARD REQUIREMENTS (DIVISION 0) GENERAL REQUIREMENTS
More informationWork Performed Please see the attached list of Construction Codes and mark all that your company typically performs
SUBCONTRACTOR PROFESSIONAL SERVICES PREQUALIFICATION FORM Prequalification Form will NOT be accepted unless completed in its entirety. Business Information Company Name: Primary Address 1: Primary Address
More informationSECTION CONVECTORS
SECTION 23 82 33 PART 1 - GENERAL 1.1 DESCRIPTION SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph
More informationDIVISION 33 UTILITIES SECTION PACKAGED SEWAGE GRINDER PUMPING UNITS
DIVISION 33 UTILITIES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: The work specified in this Section consists of providing an Environmental One grinder pump(s) unit with tank, internal piping and
More informationExhibit A Library Shell Construction
Exhibit A Library Shell Construction Library Component Building Requirements Approximately 15,000-17,000 square feet plus 900 square feet for mechanical room and additional space on roof for installation
More informationPROJECT MANUAL FOR: HUMPHREYS CO. SHERRILL BUILDING RENOVATIONS: NEW URGENT CARE CLINIC & EXTENSION SERVICE OFFICE
PROJECT MANUAL FOR: HUMPHREYS CO. SHERRILL BUILDING RENOVATIONS: NEW URGENT CARE CLINIC & EXTENSION SERVICE OFFICE HUMPHREYS COUNTY BOARD OF SUPERVISOR BELZONI, MISSISSIPPI APRIL 20, 2016 EMILY POOLE ARCHITECTURE,
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler
More informationADDENDUM 3 - JULY 24, 2015
CAMINO REAL REGIONAL MOBILITY AUTHORITY EL PASO STREETCAR PROJECT SPECIAL SPECIFICATION EP-MSF Maintenance and Storage Facility. Description. Construct the Maintenance and Storage Facility (MSF) building
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
Page 210500-1 SECTION 210500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationA. Remove Table of Contents and insert new attached Table of Contents.
ADDENDUM NO. 01 PROJECT Colby Glass E.S. Window Upgrades and ADA Work PROJECT NO. 16043 DATE February 07, 2018 TO: All Prime Contract Bidders and all others to whom Drawings and Specifications have been
More informationSECTION COOLING TOWER
PART 1 GENERAL 1.1 SECTION INCLUDES A. Mechanical induced draft Cooling Tower B. Controls C. Ladder and handrails 1.2 REFERENCES SECTION 23 65 00 COOLING TOWER A. ANSI/AFBMA 9 - Load Rating and Fatigue
More informationSECTION (15194) - FACILITY NATURAL-GAS PIPING
SECTION 23 11 23 (15194) - FACILITY NATURAL-GAS PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Pipe, Fittings and Joining Materials. 2. Protective Coating. 3. Piping Specialties. 4. Valves.
More informationSECTION BASIC ELECTRICAL MATERIALS AND METHODS
SECTION 26 05 05 BASIC ELECTRICAL MATERIALS PART 1 - GENERAL 1.1 SUMMARY A. Section includes the limited scope construction materials and methods for application with electrical installations as follows:
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More information