SECTION Stabilizer Apache Warning Track Mix for baseball or softball field surfacing

Size: px
Start display at page:

Download "SECTION Stabilizer Apache Warning Track Mix for baseball or softball field surfacing"

Transcription

1 Stabilizer Solutions, Inc. 33 S. 28 th St. Phoenix, AZ (Fax) Website: stabilizersolutions.com SECTION 1 STABILIZER APACHE WARNING TRACK MIX FOR BASEBALL OR SOFTBALL FIELD PART 1 - GENERAL 1.1 SUMMARY A. The work of this Section consists of all surfacing work and related items as indicated on the drawings and or as specified herein and includes, but is not limited to, the following items: 1. Stabilizer Apache Warning Track Mix for baseball or softball field surfacing B. Related Sections: 1. Section Site Preparation 2. Section Earthwork 3. Section Granular Materials C. General Provisions 1. All of the contract documents, including General and Supplementary Conditions and Division I General Requirements, apply to the work of this Section. 2. Examine all drawings and all other Sections of the Specifications for requirements therein affecting the work of this trade. 3. Coordinate work with that of all those affected by work of this Section. Cooperate with such trades to assure the steady progress of all work under the Contract. 1.2 PERFORMANCE REQUIREMENTS A. The following standards and definitions are applicable to the work of this Section to the extent referenced herein: 1. ASTM: American Society for Testing and Materials. 1.3 SUBMITTALS A. Shop Drawings: Show details of installation, including plans and sections. B. LEED Submittals: 1. Credit MR 4 Recycled Content: Attach product data and certification letter indicating percentages by weight of post-consumer and pre-consumer recycled content for products having recycled content. Include statement indicating costs for each product having recycled content. 2. Credit MR 5 Regional Materials: Attach product data for regional materials indicating location and distance from Project of material manufacturer and point of extraction, harvest, or recovery for each raw material. Include statement indicating cost for each regional material and the fraction by weight that is considered regional. 3. Credit MR 6 Rapidly Renewable Materials: Attach product data and certification letter indicating percentages by weight of rapidly renewable materials for each product. Include statement indicating costs for each product having rapidly renewable material Stabilizer Solutions, Inc. All Rights Reserved. Page 1 of 5

2 C. Maintenance Instructions: Submit copy(ies) of manufacturer s written maintenance instructions in accordance with Operation and Maintenance Data. 1.4 PROJECT/SITE CONDITIONS A. Environmental Conditions: Proper drainage is required. B. Field Measurements: Each bidder is required to visit the site of the work to verify the existing conditions. No adjustments will be made to the Contract Sum for variations in the existing conditions. 1. Where surfacing is indicated to fit with other construction, verify dimensions of other construction by field measurements before proceeding with the work. 1.5 QUALITY ASSURANCE A. Installer Qualifications: Installer to provide evidence to indicate successful experience in installation of Stabilizer Apache Warning Track Mix or approval by manufacturer. B. Manufacturer s technical representative shall visit the site at the start of an installation to ensure the installer understands the correct installation methods to use. 1.6 WARRANTY A. General Warranty: The special warranty specified in this Article shall not deprive the Owner of other rights the Owner may have under other provisions of the Contract Documents and shall be in addition to, and run concurrent with, other warranties made by the Contractor under requirements of the Contract Documents. B. Special Warranty: Submit a written warranty executed by the installer agreeing to repair or replace components of Stabilizer Apache Warning Track Mix that fail in materials or workmanship within the specified warranty period. Failures include, but are not limited to, the following: 1. Premature wear and tear provided the material is maintained in accordance with manufacturer s written maintenance instructions. 2. Failure of system to meet performance requirements. C. Warranty Period: Contractor shall provide warranty that product was installed per specifications upon completion of install. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Stabilizer Apache Warning Track Mix is provided by the following manufacturer: 1. Stabilizer Solutions, Inc. 33 South 28 th St., Phoenix, AZ 85034; phone (602) , (800) ; fax (602) ; website info@stabilizersolutions.com or Stabilizer Solutions, Inc. licensed manufacturer. B. Stabilizer Apache Warning Track Mix shall be produced by use of mechanical pugmill blender and metering controls for accurate proportioning of soil binder. Soil binder shall be a natural, non-toxic, non-staining, odorless, environmentally safe powder. The powder binder shall be Stabilizer as manufactured and patented by Stabilizer Solutions, Inc. Product to have 64% pre-consumer recycled content. Soil binder shall have 25 years experience at same formulation. 2.2 MATERIALS Stabilizer Solutions, Inc. All Rights Reserved. Page 2 of 5

3 A. 3-mm minus crushed aggregate screenings mechanically blended with supplemental silt and clay to match existing infield. 1. Color must be Apache Pink to match existing warning track color mm minus must be derived from parent material crushed by use of jaw crusher to achieve desired angularity. 3. Supplemental silt and clay must be blended mechanically by use of pugmill. 4. Sand and crushed stone shall consist of inert materials that are hard and durable, with stone free from surface coatings and deleterious materials. Gradation requirements shall be as follows: 5. Warning Track Mix Particle Size Analysis Percentage by ASTM F MM MINUS PARTICLE SIZE ANALYSIS Particle Size Percent Retained by Weight Sand mm Silt mm Clay <.002mm Sand Gradation U.S. Sieve No. Percent Retained USGA mm Gravel #5 0 Gravel # V. Coarse # Coarse # Medium # Fine # V. Fine # B. Stabilizer Binder 1. Patented, non-toxic, organic binder that is a colorless and odorless concentrated powder that binds infield mix soil particles. 2. Shall be mechanically blended by use of metering controls and pugmill at a rate of 8-lbs per ton. 3. Product to have 64% pre-consumer recycled content. 4. Product shall have 25 years experience at same formulation. PART 3 - EXECUTION 3.1 PREPARATION A. Proper base preparation is essential in the performance of the Stabilizer Apache Warning Track Mix. Base material should be leveled or laser graded to same grade as Stabilizer Pro Red Infield Mix. Base material has to be level to ensure Stabilizer Apache Warning Track Mix is at a uniform depth of 3 to 6 across entire field. B. Pre-soak base material with water prior to installing Stabilizer Apache Warning Track Mix and allow base to dry. Once dry, compact base to 95% compaction. Sand is not an acceptable base. 3.2 BLENDING Stabilizer Solutions, Inc. All Rights Reserved. Page 3 of 5

4 A. Stabilizer Apache Warning Track Mix is a solely owned process. Blending procedures are performed only by a licensed Stabilizer Apache Warning Track Mix blender and can only be sold through licensed Stabilizer Apache Warning Track Mix Dealers. 3.3 PLACEMENT/COMPACTION A. Stabilizer Apache Warning Track Mix at a 3 to 6 compacted depth. Allow for an approximate 1 inch cushion for compaction 1. Estimated Coverage: a. 1 Depth = 180 sqft. Per ton b. 2 Depth = 90 sqft. Per ton c. 3 Depth = 60 sqft. Per ton d. 4 Depth = 45 sqft. Per ton e. 6 Depth = 30 sqft. Per ton B. Grade Stabilizer Apache Warning Track Mix with box blade, laser grader or equal to ½% slope. C. Water heavily for full-depth moisture penetration of profile. Water activates Stabilizer, saturate to total depth. Apply 25 to 45-gallons of water per 1-ton. Application test moisture using a probing device reaching full depth. D. Compact Stabilizer Apache Warning Track Mix once moisture begins to dry and surface is able to accept roller without any deformation or pumping. 1. Compaction can be achieved by a 1-ton double-drum roller 2. Compact material making 1 to 2 passes. 3. Use plate compactor, water roller, or hand tamp on edges and hard to reach areas. E. Check for low areas and add additional Stabilizer Apache Warning Track Mix to level. 3.4 INSPECTION A. Finished surface shall be uniform, solid under foot, with desired amount of loose surface material. Compacted Stabilizer Apache Warning Track Mix shall be firm to full depth with no soft areas. 3.5 YEARLY MAINTENANCE A. Add new Stabilizer Apache Warning Track Mix as needed. B. Rip and till the field 1-2 times a year to bring fresh material to surface. Avoid tilling base material or any outside soil in with Stabilizer Apache Warning Track Mix. 1. If infield is dry, water the infield throughout the profile the night before. 2. Mark base pegs and sprinkler heads if in the infield. 3. Sweep all calcined clay off of infield 4. Rip open infield with tractor rippers to make the tiller's job easier. 5. Add additional Stabilizer, with drop spreader at this time. Stabilizer should be spread 1lb per 45 square feet on the infield. 6. Till to a inch depth and always beware of getting into your base material when you are tilling. 7. After tilling, the infield should be leveled, preferably by a laser grader to achieve a 1/2% slope. 8. New infield mix should also be added at this time, leveled, watered, and rolled. 9. If more compaction is desired after mechanical compaction, Please contact Stabilizer Solutions Inc. for more information. C. Level and compact field as needed with box blade or laser grader to ½% slope. 3.6 WEEKLY MAINTENANCE Stabilizer Solutions, Inc. All Rights Reserved. Page 4 of 5

5 A. Do not contaminate Stabilizer Apache Warning Track Mix with any outside soils as this will compromise its performance. B. Water deeply the night before weekly maintenance unless rain is forecasted. Nail drag at least 1 time per week to a 1/8-1/4 depth. Keep drag at least 6" away from grass edges. C. Mat drag surface to level and improve appearance. It is recommended to mat drag immediately after game is complete to fill in any low areas. D. It is recommended to water Stabilizer Apache Warning Track Mix daily during playing season. If this is not possible water 30 minutes prior to game. E. Remove debris, such as paper, grass clippings, leaves or other organic material by mechanically blowing or hand raking the surface as needed. F. Inspect grass infield lip and remove excess material by power washing once a week. 3.7 REPAIRS A. Excavate damaged area to the depth of the Stabilizer Apache Warning Track Mix and square-off sidewalls. B. Mix Stabilizer Apache Warning Track Mix with water and apply to excavated area to finish grade. C. Compact with an 8 to 10 hand tamp or 1000 lb. Roller. END OF SECTION Stabilizer Solutions, Inc. All Rights Reserved. Page 5 of 5

Stabilizer Solutions, Inc. All Rights Reserved. Page 1 of 5

Stabilizer Solutions, Inc. All Rights Reserved. Page 1 of 5 SECTION 32 11 00 STABILIZER FOR STABILIZED AGGREGATE PAVEMENT: FIRELANES, DRIVEWAYS AND PARKING LOTS Stabilizer Solutions, Inc. 33 South 28 th Street Phoenix, AZ 85034 USA toll free 800.336.2468 p 602.225.5900

More information

SECTION 1 STALOK FIBER FOR TURF PARKING / EVENT STAGING AND FIRE LANES

SECTION 1 STALOK FIBER FOR TURF PARKING / EVENT STAGING AND FIRE LANES SECTION 1 Stabilizer Solutions, Inc. 205 S. 28 th St. Phoenix, AZ 85034 800-336-2468 (Fax) 602-225-5902 Website: stabilizersolutions.com E-Mail: info@stabilizersolutions.com STALOK FIBER FOR TURF PARKING

More information

TechniSoil G5 Installation Specification

TechniSoil G5 Installation Specification TechniSoil G5 Installation Specification Prepared by: TechniSoil Global Inc. Page 2 Stabilized Aggregate Path and Road Surface TechniSoil G5 Premix Specification 1. Summary This Section includes material

More information

Stanford University Facilities Design Guidelines SECTION ASPHALT UNIT PAVING. A. ASTM C-33 Standard Specification for Concrete Aggregates.

Stanford University Facilities Design Guidelines SECTION ASPHALT UNIT PAVING. A. ASTM C-33 Standard Specification for Concrete Aggregates. SECTION 32 14 23 ASPHALT UNIT PAVING PART 1 GENERAL 1.1 DESCRIPTION Work Included: All labor, materials, appliances, tools, equipment, facilities, transportation, and services for and incidental to performing

More information

Stanford University Facilities Design Guidelines SECTION STONE FINES PAVING. American Society for Testing and Materials.

Stanford University Facilities Design Guidelines SECTION STONE FINES PAVING. American Society for Testing and Materials. SECTION 32 15 40 STONE FINES PAVING PART 1 GENERAL 1.1 RELATED WORK Section 32 11 00: Base Courses 1.2 QUALITY ASSURANCE A. Applicable Standards: Any reference shall mean the current or latest editions

More information

SECTION ASPHALT PAVING

SECTION ASPHALT PAVING PART 1 - GENERAL 1.1 DESCRIPTION SECTION 32 12 16 ASPHALT PAVING SPEC WRITER NOTE: Delete or add information between // ---- // and any other items applicable to project. Any item added to the text shall

More information

DRIVABLE GRASS GUIDELINE FOR NON PLANTED DRY INFILL INSTALLATIONS

DRIVABLE GRASS GUIDELINE FOR NON PLANTED DRY INFILL INSTALLATIONS DRIVABLE GRASS GUIDELINE FOR NON PLANTED DRY INFILL INSTALLATIONS Please read through this instruction completely before beginning your installation. Be sure the proper equipment, and safety precautions

More information

ITEM 252 IN-PLACE FULL DEPTH COLD FLEXIBLE PAVEMENT RECYCLING

ITEM 252 IN-PLACE FULL DEPTH COLD FLEXIBLE PAVEMENT RECYCLING AFTER NOVEMBER 1, 2008 ITEM 252 IN-PLACE FULL DEPTH COLD FLEXIBLE PAVEMENT RECYCLING 252.1 Description. This work shall consist of a stabilized base course composed of a mixture of the existing bituminous

More information

SECTION XXXXX AGGREGATE PIERS PART 1 - GENERAL

SECTION XXXXX AGGREGATE PIERS PART 1 - GENERAL SECTION XXXXX AGGREGATE PIERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 00 and Division

More information

SECTION ASPHALT PAVING

SECTION ASPHALT PAVING SECTION 02500 ASPHALT PAVING PART 1 GENERAL 1.1 RELATED DOCUMENTS a) Drawings and general provisions of the Contract, including the General and Supplementary General Conditions and Division 00 & 01 specification

More information

SECTION CONTROLLED LOW STRENGTH MATERIAL

SECTION CONTROLLED LOW STRENGTH MATERIAL SECTION 03300 CONTROLLED LOW STRENGTH MATERIAL PART 1 GENERAL 1.1 DESCRIPTION A. This Section specifies Controlled Low Strength Material (CLSM) to be used as described in this specification, including

More information

The Work under this Section consists of performing all operations necessary to complete construction of the leveling course on the prepared subbase.

The Work under this Section consists of performing all operations necessary to complete construction of the leveling course on the prepared subbase. SECTION 20.22 LEVELING COURSE Article 22.1 General The Work under this Section consists of performing all operations necessary to complete construction of the leveling course on the prepared subbase. Article

More information

SECTION ASPHALT PAVING

SECTION ASPHALT PAVING SECTION 321216 ASPHALT PAVING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Hot-mix asphalt paving. 1.2 PRE-INSTALLATION MEETINGS A. Pre-installation Conference: Conduct conference at Project site.

More information

CITY OF LETHBRIDGE SECTION INFRASTRUCTURE SERVICES Page 1 of 7 GRANULAR BASE PREP

CITY OF LETHBRIDGE SECTION INFRASTRUCTURE SERVICES Page 1 of 7 GRANULAR BASE PREP INFRASTRUCTURE SERVICES Page 1 of 7 1.0 GRANULAR BASE AND SUB-BASE 1.1 DESCRIPTION.1 This section specifies requirements for supplying, producing, hauling placing and compacting processed gravel or quarried

More information

CONDITION OF THE INFIELD

CONDITION OF THE INFIELD CONDITION OF Safety Outcome THE INFIELD THEGOOD THEBAD & THEDIRTY ANATOMY of an INFIELD SKIN COMPOSITION Marbles in a Jar Particles vary in size Larger particles create void space Smaller particles fill

More information

SECTION 28 AGGREGATE BASE COURSE (FAA P-208) [For base course under runway and taxiway surfaces, use Section 29, FAA Item P-209.]

SECTION 28 AGGREGATE BASE COURSE (FAA P-208) [For base course under runway and taxiway surfaces, use Section 29, FAA Item P-209.] 28-1 GENERAL SECTION 28 AGGREGATE BASE COURSE (FAA P-208) The Contractor shall perform all work required by the plans and specifications for construction of aggregate base course for, use under runway

More information

CRUSHED AGGREGATE BLENDED WITH GRANITECRETE ADMIXTURE SURFACING

CRUSHED AGGREGATE BLENDED WITH GRANITECRETE ADMIXTURE SURFACING Guide Specification CRUSHED AGGREGATE BLENDED WITH GRANITECRETE ADMIXTURE SURFACING COORDINATE WITH DRAWINGS: Show location and extent of stabilized aggregate surfacing. Show details required at adjoining

More information

SECTION MECHANICALLY STABILIZED EARTH RETAINING WALLS

SECTION MECHANICALLY STABILIZED EARTH RETAINING WALLS SECTION 13100 MECHANICALLY STABILIZED EARTH RETAINING WALLS PART 1 -- GENERAL 1.01 THE REQUIREMENT A. Includes all labor, material, equipment, testing and submittals required to design and complete construction

More information

1.01 Work Included This work includes furnishing and installing a synthetic all-weather running track surface.

1.01 Work Included This work includes furnishing and installing a synthetic all-weather running track surface. PRODUCT SPECIFICATIONS FOR (13MM) LATEX MAT SYSTEM PART 1 Scope of work 1.01 Work Included This work includes furnishing and installing a synthetic all-weather running track surface. 1.02 Description of

More information

SECTION ASPHALT CONCRETE

SECTION ASPHALT CONCRETE SECTION 02740 ASPHALT CONCRETE PART 1. GENERAL 1.01 SECTION INCLUDES A. Work includes but is not limited to the following: 1.02 RELATED SECTIONS 1. Provide all material, labor, and equipment to prepare

More information

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PORTLAND CEMENT. Section PORTLAND CEMENT STABILIZED SUBGRADE

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PORTLAND CEMENT. Section PORTLAND CEMENT STABILIZED SUBGRADE PART 1 GENERAL 1.01 SUMMARY Section 02338 PORTLAND CEMENT This Section includes foundation course of Portland cement stabilized natural subgrade material. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices. 1.

More information

SECTION AGGREGATE BASE COURSE

SECTION AGGREGATE BASE COURSE SECTION 32 11 23 AGGREGATE BASE COURSE PART 1 GENERAL 1.01 SECTION INCLUDES A. The WORK to be performed includes the preparation of the aggregate base course foundation; and the production, stockpiling,

More information

INDEX DESCRIPTION MATERIALS APPROVAL FOR BASE COURSE CONSTRUCTION MEASUREMENT PAYMENT 6

INDEX DESCRIPTION MATERIALS APPROVAL FOR BASE COURSE CONSTRUCTION MEASUREMENT PAYMENT 6 03005_Jan31_2018.pdf Page 1 of 6 INDEX Page 03005-1 DESCRIPTION 2 03005-2 MATERIALS 2 03005-3 APPROVAL FOR BASE COURSE 3 03005-4 CONSTRUCTION 3 03005-5 MEASUREMENT 6 03005-6 PAYMENT 6 03005_Jan31_2018.pdf

More information

DIVISION 2100 SITEWORK

DIVISION 2100 SITEWORK DIVISION 2100 SITEWORK SECTION 2120 STABILIZED SUBGRADE PART 1 - GENERAL 1.01 SCOPE This section covers the preparation of subgrade for pavement, sidewalks, recreational trails, and drive approaches. 1.02

More information

DRIVABLE GRASS GUIDELINE FOR DRIVABLE TURF INSTALLATION

DRIVABLE GRASS GUIDELINE FOR DRIVABLE TURF INSTALLATION DRIVABLE GRASS GUIDELINE FOR DRIVABLE TURF INSTALLATION Please read through this instruction completely before beginning your installation. Be sure the proper equipment, and safety precautions are in place.

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION ITEM 00252 IN-PLACE FULL DEPTH COLD FLEXIBLE PAVEMENT RECYCLING 252.1 Description. This work shall consist of a stabilized base course composed of a mixture of the existing bituminous

More information

Section 506. SLURRY SEAL

Section 506. SLURRY SEAL 506.02 Section 506. SLURRY SEAL 506.01. Description. This work consists of providing traffic control, preparing the surface, and applying a slurry seal mixture. 506.02. Materials. Provide material in accordance

More information

SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7)

SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7) Page 1 of 7 STONE STRONG SYSTEMS SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7) PART 1: GENERAL 1.01 Description A. Work includes furnishing and installing precast modular

More information

2014 Capital Project Phase 3 Grand Island Central School District Cannon Design Project No SECTION PAVING PART 1 - GENERAL

2014 Capital Project Phase 3 Grand Island Central School District Cannon Design Project No SECTION PAVING PART 1 - GENERAL SECTION 321200 - PAVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The Contractor for this work shall be held to have read all of the Bidding Requirements, the Proposal Forms, the General Conditions of

More information

SECTION BITUMINOUS CONCRETE PAVING

SECTION BITUMINOUS CONCRETE PAVING PART 1 GENERAL 1.1 SECTION INCLUDES: SECTION 02400 BITUMINOUS CONCRETE PAVING A. The intent of this specification section is to provide requirements for materials, equipment, and methods for constructing

More information

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CEMENT STABILIZED BASE COURSE. 1. Foundation course of cement stabilized crushed stone.

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CEMENT STABILIZED BASE COURSE. 1. Foundation course of cement stabilized crushed stone. PART 1 GENERAL 1.01 SUMMARY A. This section includes: Section 02712 1. Foundation course of cement stabilized crushed stone. 2. Foundation course of cement stabilized bank run gravel. 1.02 MEASUREMENT

More information

HYDROGRID SUBSURFACE IRRIGATED HARTRU TENNIS COURTS

HYDROGRID SUBSURFACE IRRIGATED HARTRU TENNIS COURTS HYDROGRID SUBSURFACE IRRIGATED HARTRU TENNIS COURTS PART 1 - GENERAL WORK INCLUDED A. Provide all equipment and materials, and do all work necessary to construct a HydroGrid subsurface irrigated fastdry

More information

Section 1I-3 - Bioswales

Section 1I-3 - Bioswales BIOSWALES (Numbering pending) These specifications compliment the bioswale design portion of the Iowa Stormwater Management Manual in Chapter 2, Section 2I-3. Sections of the following documents, as referenced

More information

SECTION ASPHALT PAVING AND SURFACING

SECTION ASPHALT PAVING AND SURFACING SECTION 02500 ASPHALT PAVING AND SURFACING PART 1 - GENERAL 1.01 WORK INCLUDED A. Traffic control as required to divert vehicular and pedestrian traffic around construction. B. Spreading and compacting

More information

KU Design Guidelines APPENDIX II PERMEABLE BITUMINOUS PAVEMENT

KU Design Guidelines APPENDIX II PERMEABLE BITUMINOUS PAVEMENT PERMEABLE BITUMINOUS PAVEMENT PART 1: GENERAL 1.01. RELATED DOCUMENTS: A. Drawings and general provisions of Contract, including Special Requirements General Conditions and Division 1 Specifications Sections,

More information

SECTION / ENGINEERED AGGREGATE PIERS (SOIL REINFORCEMENT AND FOUNDATION SYSTEM)

SECTION / ENGINEERED AGGREGATE PIERS (SOIL REINFORCEMENT AND FOUNDATION SYSTEM) PART 1 GENERAL 1.01 WORK INCLUDED SECTION 02360 / 31 34 30.13 ENGINEERED AGGREGATE PIERS (SOIL REINFORCEMENT AND FOUNDATION SYSTEM) A. Provide all equipment, material, labor and supervision to design and

More information

ITEM P-609 SEAL COATS AND BITUMINOUS SURFACE TREATMENTS

ITEM P-609 SEAL COATS AND BITUMINOUS SURFACE TREATMENTS 9/30/2009 AC 150/5370-10E ITEM P-609 SEAL COATS AND BITUMINOUS SURFACE TREATMENTS DESCRIPTION GENERAL NOTE: Although this type of surface sealant is approved for use on general aviation airports, we remind

More information

Lantz-Boggio Architects, P.C LBA Project No

Lantz-Boggio Architects, P.C LBA Project No SECTION 313430- PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all equipment, material, labor and supervision to design and install Engineered Aggregate Piers for the soil reinforcement. Design shall rely

More information

Asphalt Rubber Chip Sealing DRAFT MAINTENANCE SPECIFICATION. March 22, 2007

Asphalt Rubber Chip Sealing DRAFT MAINTENANCE SPECIFICATION. March 22, 2007 Asphalt Rubber Chip Sealing DRAFT MAINTENANCE SPECIFICATION March 22, 2007 Description: This work consists of furnishing and applying asphalt rubber binder followed by an application of treated cover aggregate

More information

1.02 RELATED WORK: Refer to the following sections for related work: Section 4000-Concrete Materials and Methods

1.02 RELATED WORK: Refer to the following sections for related work: Section 4000-Concrete Materials and Methods SECTION 2000- EARTHWORK PART 1- GENERAL 1.01 SCOPE: This Section covers excavation, fill, and compaction of earth and rock for roadway, embankments, structural foundations, and planted areas. Topics include

More information

Section 25 Aggregate Subbase

Section 25 Aggregate Subbase Black text from standard FAA spec Strikeout text deletions from FAA standard spec Blue text additions to FAA standard spec Red text notes to the Engineer/won t appear in spec I. DESCRIPTION A. GRANULAR

More information

BONDED UNITARY RUBBER PROTECTIVE PLAYGROUND SURFACING

BONDED UNITARY RUBBER PROTECTIVE PLAYGROUND SURFACING BONDED UNITARY RUBBER PROTECTIVE PLAYGROUND SURFACING PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

ASPHALTIC CONCRETE FRICTION COURSE (ASPHALT-RUBBER):

ASPHALTIC CONCRETE FRICTION COURSE (ASPHALT-RUBBER): SECTION 414 ASPHALTIC CONCRETE FRICTION COURSE (ASPHALT-RUBBER): 414-1 Description: Asphaltic Concrete Friction Course (Asphalt-Rubber), hereinafter asphaltic concrete, shall consist of furnishing all

More information

City of Estevan. Construction Specifications

City of Estevan. Construction Specifications City of Estevan Construction Specifications 1.0 GENERAL This section governs the requirements for the supply and placement of Asphaltic Concrete pavement. 2.0 MATERIALS 2.1 Aggregate Shall consist of hard,

More information

CETCO-VOLCLAY CG-50 SPECIFICATION GUIDELINES MIX IN PLACE

CETCO-VOLCLAY CG-50 SPECIFICATION GUIDELINES MIX IN PLACE CETCO-VOLCLAY CG-50 SPECIFICATION GUIDELINES MIX IN PLACE 1.0 GENERAL 1.1 Scope A. This specification guideline covers the technical requirements for furnishing all labor, materials, equipment, and incidentals

More information

SPECIFICATIONS FOR BONDED WEARING COURSE

SPECIFICATIONS FOR BONDED WEARING COURSE SPECIFICATIONS FOR BONDED WEARING COURSE 1.0 DEFINITIONS The term Director [Superintendent, etc.] shall mean the Director of Public Works of the awarding authority. The term Designee shall mean an employee

More information

SECTION AGGREGATES

SECTION AGGREGATES SECTION 32 05 00 AGGREGATES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Aggregate base 2. Engineered fill 3. Backfill 4. Fine filter aggregate (non-frost susceptible fill) 5. Riprap 6. Recreational

More information

SECTION Arisfor WallGuard

SECTION Arisfor WallGuard 1.1 GENERAL A. is a three component polymerized cementitious protective coating that can be applied to a variety of vertical interior and exterior substrates including: stucco, exterior gypsum sheathing,

More information

A. Texas Department of Transportation 2004 Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (TxDOT).

A. Texas Department of Transportation 2004 Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (TxDOT). SECTION 32 01 16 ASPHALT OVERLAY PART 1 - GENERAL 1.1 SCOPE OF WORK A. This Section specifies the requirements for scarifying, grinding, sweeping and repair of existing asphalt concrete pavement to establish

More information

REQUEST FOR QUOTE (RFQ) DELIVER, PLACE, AND COMPACT DRIVING SURFACE AGGREGATE (DSA)

REQUEST FOR QUOTE (RFQ) DELIVER, PLACE, AND COMPACT DRIVING SURFACE AGGREGATE (DSA) 3/2018 REQUEST FOR QUOTE (RFQ) DELIVER, PLACE, AND COMPACT DRIVING SURFACE AGGREGATE (DSA) (ROAD NAME(S) & ID #) (NAME OF MUNICIPALITY & COUNTY) 1. SCOPE OF WORK: (hereinafter referred to as Owner ), requires

More information

SECTION BITUMINOUS CONCRETE PAVING AND ATHLETIC SURFACING. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

SECTION BITUMINOUS CONCRETE PAVING AND ATHLETIC SURFACING. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. SECTION 321800 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting

More information

ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE

ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE AFTER NOVEMBER 1, 2008 ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE 231.1 Description. This item shall consist of a foundation for surface course or for other base courses and shall be composed

More information

Item P-219 Recycled Concrete Aggregate Base Course

Item P-219 Recycled Concrete Aggregate Base Course Item P-219 Recycled Concrete Aggregate DESCRIPTION 219-1.1 This item consists of a base course composed of recycled concrete aggregate, crushed to meet a particular gradation, constructed on a prepared

More information

SECTION ASPHALTIC CONCRETE PAVING

SECTION ASPHALTIC CONCRETE PAVING SECTION 02742 ASPHALTIC CONCRETE PAVING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Prepare pavement sub-grade as described in Contract Documents to receive pavement base and paving. 2.

More information

SECTION ASPHALT PAVING

SECTION ASPHALT PAVING SECTION 32 1216 ASPHALT PAVING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Prepare pavement sub-grade as described in Contract Documents to receive pavement base and paving. 2. Furnish

More information

ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE

ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE AFTER MAY 1, 2014 ITEM 231 CEMENT STABILIZED CRUSHED AGGREGATE BASE COURSE 231.1 Description. This Item shall govern for surface courses or for other base courses composed of a mixture of crushed aggregate,

More information

KU Medical Center 2018 PAVEMENT RESTORATION PROJECT Project No May 4, 2018

KU Medical Center 2018 PAVEMENT RESTORATION PROJECT Project No May 4, 2018 SECTION 321216 - ASPHALT PAVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Requirements of the Contract apply to this Section. 1.2 SUMMARY A. Section Includes: 1. Cold milling of existing

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 321216 - ASPHALT PAVING PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

BASE CONSTRUCTION MATERIALS A Aggregate

BASE CONSTRUCTION MATERIALS A Aggregate BASE CONSTRUCTION 2211 AGGREGATE BASE 2211.1 DESCRIPTION This work consists of placing aggregate base. 2211.2 MATERIALS A Aggregate... 3138 Provide the class of aggregate as required by the contract. 2211.3

More information

MSCAA /04 ITEM P-219 RECYCLED CONCRETE CRUSHED AGGREGATE BASE COURSE DESCRIPTION MATERIALS

MSCAA /04 ITEM P-219 RECYCLED CONCRETE CRUSHED AGGREGATE BASE COURSE DESCRIPTION MATERIALS 219-1.1 ITEM P-219 RECYCLED CONCRETE CRUSHED AGGREGATE BASE COURSE DESCRIPTION This item consists of a base course composed of crushed recycled concrete aggregate, crushed to meet a particular gradation,

More information

EXCAVATION, TRENCHING & BACKFILLING..1 The section refers to excavation, trenching, backfilling and all Work pertaining thereto.

EXCAVATION, TRENCHING & BACKFILLING..1 The section refers to excavation, trenching, backfilling and all Work pertaining thereto. CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 02315-1 PART 1 GENERAL 1.1 Description of Work.1 The section refers to excavation, trenching, backfilling and all Work pertaining thereto. 1.2 Related

More information

SECTION UTILITY BACKFILL MATERIALS

SECTION UTILITY BACKFILL MATERIALS SECTION 31 23 23 UTILITY BACKFILL MATERIALS PART 1: GENERAL 1.01 SECTION INCLUDES A. Material Classifications B. : 1. Concrete sand 2. Gem sand 3. Pea gravel 4. Crushed stone 5. Crushed concrete 6. Bank

More information

TABLE ASPHALTIC CONCRETE MIX DESIGN CRITERIA

TABLE ASPHALTIC CONCRETE MIX DESIGN CRITERIA SECTION 413 ASPHALTIC CONCRETE (ASPHALT-RUBBER): 413-1 Description: Asphaltic Concrete (Asphalt-Rubber), hereinafter asphaltic concrete, shall consist of furnishing all materials, mixing at a plant, hauling,

More information

UNHSC Bioretention Soil Specification February, SOIL PREPARATION (PERFORMANCE SPECIFICATION) for Bioretention Systems

UNHSC Bioretention Soil Specification February, SOIL PREPARATION (PERFORMANCE SPECIFICATION) for Bioretention Systems SOIL PREPARATION (PERFORMANCE SPECIFICATION) for Bioretention Systems PART 1 - GENERAL 1.1 SUMMARY A. Section includes soil media for the bioretention systems and rain gardens specified according to performance

More information

GUIDELINE FOR PLANTED INFILL INSTALLATIONS. Please read prior to installation, and have proper equipment and safety precautions in place.

GUIDELINE FOR PLANTED INFILL INSTALLATIONS. Please read prior to installation, and have proper equipment and safety precautions in place. GUIDELINE FOR PLANTED INFILL INSTALLATIONS Please read prior to installation, and have proper equipment and safety precautions in place. For additional information please visit our website at www.soilretention.com

More information

CITY OF LETHBRIDGE SECTION Construction Specifications SIDEWALK CONSTRUCTION PAGE 1 of 5

CITY OF LETHBRIDGE SECTION Construction Specifications SIDEWALK CONSTRUCTION PAGE 1 of 5 Construction Specifications SIDEWALK CONSTRUCTION PAGE 1 of 5 1.0 EXCAVATION AND FILL 1.1 GENERAL.1 The excavation or fill shall be made to provide proper grade, lines and crosssection for the laying of

More information

1. Concrete pavers, with ungrouted joints, over sand base. a. Large precast sections in random mix with smaller concrete pavers

1. Concrete pavers, with ungrouted joints, over sand base. a. Large precast sections in random mix with smaller concrete pavers SECTION 32 14 00 - PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specifications Sections, apply

More information

SECTION UNIT PAVERS

SECTION UNIT PAVERS PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Concrete pavers. 2. Detectable warning pavers. 3. Warning stripe pavers. 1.2 SUBMITTALS A. Product Data: For the following: 1. Pavers.

More information

STANDARD SPECIFICATIONS JANUARY 2015 S-4 GRANULAR BASE and AGGREGATES TABLE OF CONTENTS

STANDARD SPECIFICATIONS JANUARY 2015 S-4 GRANULAR BASE and AGGREGATES TABLE OF CONTENTS TABLE OF CONTENTS 4.01 SCOPE OF WORK... 1 4.02 RELATED DOCUMENTS AND REFERENCES... 1 4.03 MATERIALS... 1 4.04 GENERAL REQUIREMENTS... 2 4.05 HAULING AND PLACING... 5 4.05. COMPACTION... 5 4.06 COMPACTION

More information

TRUEGRID Permeable Paver Technical Specifications

TRUEGRID Permeable Paver Technical Specifications 1-855-355-GRID (4743) TRUEGRID Permeable Paver Technical Specifications SECTION 32 12 43 Porous Flexible Paving PART 1 GENERAL 1.1 Description of Work A. Work Included 1. Provide and install sub-base material

More information

CITY OF FARGO SPECIFICATIONS AGGREGATE BASES

CITY OF FARGO SPECIFICATIONS AGGREGATE BASES AGGREGATE BASES PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of all labor, material, accessories, and equipment necessary

More information

A. Division 01 Specification Sections, Drawings, General Conditions, Supplementary General Conditions, and Special Conditions apply to this section.

A. Division 01 Specification Sections, Drawings, General Conditions, Supplementary General Conditions, and Special Conditions apply to this section. Note: This guide specification for U.S. applications is for concrete grid units placed on a sand bedding course over a compacted dense-graded aggregate base. The text allows an option of topsoil and grass

More information

Stanford University Facilities Design Guidelines SECTION SEAL COATS. C. Section : Traffic Striping and Pavement Markings

Stanford University Facilities Design Guidelines SECTION SEAL COATS. C. Section : Traffic Striping and Pavement Markings SECTION 32 12 36 SEAL COATS PART 1 GENERAL 1.1 RELATED WORK A. Section 31 10 00: Site Preparation B. Section 32 12 00: Flexible Paving C. Section 32 17 23 01: Traffic Striping and Pavement Markings 1.2

More information

County of Park PARK COUNTY WYOMING PRIVATE SOURCE GRAVEL POWELL AREA PRODUCE TO STOCKPILE REQUEST FOR QUOTE

County of Park PARK COUNTY WYOMING PRIVATE SOURCE GRAVEL POWELL AREA PRODUCE TO STOCKPILE REQUEST FOR QUOTE PUBLIC WORKS DEPARTMENT Brian J. Edwards, PE Park County Engineer Road & Bridge and Engineering 527-8520 or 754-8520 PARK COUNTY, WYOMING ORGANIZED 1911 ORIGINAL PARK COUNTY COURTHOUSE CODY, WYOMING COMPLETED

More information

SECTION XXXXX STONE COLUMNS PART 1 - GENERAL

SECTION XXXXX STONE COLUMNS PART 1 - GENERAL SECTION XXXXX STONE COLUMNS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 00 and Division 01

More information

Base Course Design and Construction

Base Course Design and Construction Part I General A. This information is to be used as a guideline in construction a dynamic aggregate base and drainage system. Project conditions may vary based on overall scope of work and location. Any

More information

SECTION ELASTOMERIC LIQUID FLOORING

SECTION ELASTOMERIC LIQUID FLOORING SECTION 096713 - ELASTOMERIC LIQUID FLOORING PART I GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Specification Guide and Installation Overview

Specification Guide and Installation Overview Specification Guide and Installation Overview PART ONE GENERAL 1.1 SCOPE OF WORK Provide materials, labor, transportation, services and equipment necessary to supply and install Xeripave or Xeribrix as

More information

SECTION LANDSCAPE SUBDRAINAGE. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

SECTION LANDSCAPE SUBDRAINAGE. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. SECTION 334610 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting

More information

SECTION EARTHWORK

SECTION EARTHWORK SECTION 02200 EARTHWORK PART 1 - GENERAL 1.01 WORK INVOLVED A. Provide all labor, materials and equipment as required for all excavation, grading, providing borrow materials, hauling, placing and compacting

More information

SECTION BUILDING EARTHWORK

SECTION BUILDING EARTHWORK Conditions of Use/ Responsibility of Data Montgomery County Public Schools Facilities Guide DIVISION 2 - SITE WORK These guideline specifications are to be used by the A/E as a base document in the development

More information

Allen & Sherriff Architects, Inc Yonge Street, S202, Richmond Hill, Ontario L4C 5K9 Tel: Fax: File Ref.

Allen & Sherriff Architects, Inc Yonge Street, S202, Richmond Hill, Ontario L4C 5K9 Tel: Fax: File Ref. Allen & Sherriff Architects, Inc. 10350 Yonge Street, S202, Richmond Hill, Ontario L4C 5K9 Tel: 905-884-1117 Fax: 905-884-4970 File Ref. 4166 Tender No.: T18-21 St. Theresa C.S. Child Care Expansion Durham

More information

ITEM 247 FLEXIBLE BASE

ITEM 247 FLEXIBLE BASE ITEM 247 FLEXIBLE BASE 247.1. Description. This Item shall govern for the delivery, stockpiling and/or the construction of foundation or base courses as herein specified and in conformity with the typical

More information

SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION EXCAVATION AND BACKFILL, GENERAL

SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION EXCAVATION AND BACKFILL, GENERAL SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 31 23 00 EXCAVATION AND BACKFILL, GENERAL PART 1 GENERAL... 2 1.1 Description... 2 1.2 Submittals... 2 1.3 Reference

More information

CONCRETE TILE PAVERS

CONCRETE TILE PAVERS Section 32 14 13 CONCRETE TILE PAVERS (1995 MasterFormat Section 02780) Note: This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the

More information

SECTION AGGREGATE BASE COURSE

SECTION AGGREGATE BASE COURSE SECTION 02232 AGGREGATE BASE COURSE PART 1 GENERAL 1.01 SECTIONS INCLUDES A. Provision, spreading and compaction of materials of aggregate base course for roads in accordance with the specifications and

More information

SECTION POROUS PAVEMENT SYSTEM

SECTION POROUS PAVEMENT SYSTEM SECTION 02795 POROUS PAVEMENT SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Porous grass paving grid system. 1.2 RELATED SECTIONS A. Section 02300 - Earthwork. B. Section 02620 Sub-Drainage System. C.

More information

Section 506 SLURRY SEAL Description. Prepare the surface and apply a properly proportioned slurry seal mixture.

Section 506 SLURRY SEAL Description. Prepare the surface and apply a properly proportioned slurry seal mixture. 506.01 Section 506 SLURRY SEAL 506.01 Description. Prepare the surface and apply a properly proportioned slurry seal mixture. 506.02 Materials. Furnish a slurry seal mixture consisting of a blend of asphalt

More information

PAVING SLABS ON AGGREGATE BED FOR ROOF PLAZA DECKS

PAVING SLABS ON AGGREGATE BED FOR ROOF PLAZA DECKS SECTION 32 14 13.16 PAVING SLABS ON AGGREGATE BED FOR ROOF PLAZA DECKS (1995 MasterFormat Section 02784) Note: This guide specification for the U.S. is for paving slabs used as ballast and/or paving on

More information

SACRAMENTO COUNTY ASPHALT RUBBER HOT MIX-GAP GRADED (ARHM-GG):

SACRAMENTO COUNTY ASPHALT RUBBER HOT MIX-GAP GRADED (ARHM-GG): SACRAMENTO COUNTY ASPHALT RUBBER HOT MIX-GAP GRADED (ARHM-GG): ARHM-GG shall conform to the provisions for Type "A" asphalt concrete in Section 39, "Asphalt Concrete," of the State Standard Specifications

More information

SPECIFICATION GUIDELINE

SPECIFICATION GUIDELINE SPECIFICATION GUIDELINE Environmental Stoneworks Corporate Office 6300 East Stapleton Drive South Denver, CO 80216 Phone (303) 309-3040 Fax (303) 309-3059 www.estoneworks.com Environmental Stoneworks specification

More information

TOWN OF LAFAYETTE SPECIFICATIONS FOR HIGHWAY CONSTRUCTION. June 1984

TOWN OF LAFAYETTE SPECIFICATIONS FOR HIGHWAY CONSTRUCTION. June 1984 1 TOWN OF LAFAYETTE SPECIFICATIONS FOR HIGHWAY CONSTRUCTION June 1984 1. DEFINITIONS APPROVAL, APPROVED, ACCEPTED OR WORDS OR TERMS OF SIMILAR MEANING: Written approval of the Highway Superintendent. BASE

More information

1.01 The work shall consist of spreading and compacting crushed and pugmilled aggregate on a prepared surface.

1.01 The work shall consist of spreading and compacting crushed and pugmilled aggregate on a prepared surface. 3505 - SPECIFICATION FOR GRANULAR BASE COURSE 3505 - l DESCRIPTION 1.01 The work shall consist of spreading and compacting crushed and pugmilled aggregate on a prepared surface. 1.02 The following definitions

More information

UPRR INDUSTRIAL LEAD BRIDGE T-WALL RETAINING WALL SYSTEM 5.0 x 7.5 UNITS DESIGN UNIT 018 WORK PACKAGE 04

UPRR INDUSTRIAL LEAD BRIDGE T-WALL RETAINING WALL SYSTEM 5.0 x 7.5 UNITS DESIGN UNIT 018 WORK PACKAGE 04 UPRR INDUSTRIAL LEAD BRIDGE T-WALL RETAINING WALL SYSTEM 5.0 x 7.5 UNITS DESIGN UNIT 018 WORK PACKAGE 04 1. Description This work shall consist of the design, manufacture and construction of a T-WALL structure

More information

SPECIFICATIONS FOR FULL DEPTH RECLAMATION WITH CALCIUM CHLORIDE

SPECIFICATIONS FOR FULL DEPTH RECLAMATION WITH CALCIUM CHLORIDE SPECIFICATIONS FOR FULL DEPTH RECLAMATION WITH CALCIUM CHLORIDE 1.0 DEFINITIONS The term Director [Superintendent, etc.] shall mean the Director of Public Works of the awarding authority. The term Designee

More information

Product Guide Specification

Product Guide Specification SofSURFACES, Inc. September 2004 4393 Discovery Line PO Box 239 Petrolia, Ontario N0N 1R0 Canada Toll Free (800) 263-2363 Phone (519) 882-8799 Fax (519) 882-2697 Website www.sofsurfaces.com E-mail alltinfo@sofsurfaces.com

More information

Section Wood Grille Ceiling Panels

Section Wood Grille Ceiling Panels Section 095426 Wood Grille Ceiling Panels PART 1 GENERAL RELATED DOCUMENTS Drawings and general conditions of the Contract, including General and Supplementary Conditions and Division 1 Specification sections

More information

DMX AG AIR-GAP MEMBRANE. Section Damproofing and Waterproofing

DMX AG AIR-GAP MEMBRANE. Section Damproofing and Waterproofing DMX AG AIR-GAP MEMBRANE Section 07 10 00 Damproofing and Waterproofing NOTE TO SPECIFIER: These specifications were current at the time of publication but are subject to change at any time without notice.

More information

A. Texas Department Transportation 2004 Standard Specifications for Construction of Highways, Streets and Bridges (TxDOT):

A. Texas Department Transportation 2004 Standard Specifications for Construction of Highways, Streets and Bridges (TxDOT): SECTION 31 32 13.16 CEMENT STABILIZATION PART 1 GENERAL 1.1 SCOPE OF WORK A. This Section pertains to the specifications for cement stabilization of sandy or silty soil and consists of pulverizing, addition

More information