Series Sump and Sewage Systems

Transcription

1 Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13

2 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column Type Sump & Sewage Pumps. Built from the highest quality engineered components, these pumps can be supplied as replacement pumps or as part of a new installation. Armstrong systems are available with control panel, level controls, and sump pit cover plate. Sewage Series 0 & 2 Armstrong sump pumps are offered in two designs, engineered to handle a wide range of waste water pumping requirements. 0 Standard Features centerless ground stainless steel shaft Enclosed-type bronze impeller, keyed to shaft Cast iron inlet strainer Flexible coupling Plate-mounted alemite grease fittings Intermediate grease-lubricated bronze guide bearings for pit depths over ft. (1.2m) 2 Standard Features 1¼" (32mm) heavy-duty carbon steel shaft Heavy-duty grease-lubricated bronze guide bearings Enclosed-type bronze impeller Cast iron inlet strainer Flexible coupling Raised thrust bearing mounted in a dirt and moisture resistant housing Plate-mounted alemite grease fittings Intermediate grease-lubricated bronze guide bearings for pit depths over ft. (1.m) Flanged pump column pipe 2 Optional Features Pump conversion for condensate service consisting of water lubricated graphite pump bearings, stainless steel shaft and bronze impeller Water lubricated cutless rubber bearings stainless steel shaft Armstrong sump pump designs address the specific requirements for light-duty or heavyduty commercial applications such as: elevator pits, electrical tunnels, loading docks, drain tiles, laundry facilities, floor drains and condensate returns.

3 Sewage Series 0 Armstrong 0 Series sewage pumping systems for building, municipal and industrial applications provide a top-quality, reliable and long-lasting product. Sewage Series 0 Pumps Armstrong sewage pumps feature a screenless design, capable of handling waste material and sewage up to 2½" (mm) solids. Standard Features 1¼" (32mm) carbon steel shaft Gas-tight construction Raised thrust bearing mounted in a dirt and moisture resistant housing Cast iron 2-vane open-type impeller Floor plate mounted alemite grease fittings Grease-lubricated bronze guide bearings for pit depths over ft. (1.m) Flanged pump and column pipe Optional Features Water-lubricated cutless rubber bearings Water-lubricated graphite bearings stainless steel shaft

4 Series 000 Controls & Accessories Choose Armstrong pumping systems for reliability, efficiency and quality engineered products. Control Panel Armstrong Sump & Sewage systems are available with a variety of starting equipment choices. Features nema 1 control panel enclosure ul 0 or csa approved Main disconnect Thermal and short circuit protection using internal circuit breakers Failure protection with automatic transfer to nonoperating pump (duplex system) Control transformer with fused primary (ul 0) Power-on and pump-run indicating lights Hand-Off-Automatic selector switch Optional Features nema 2, 3,, x or 7 enclosure High level buzzer or " (1mm) bell, indicating light and silence reset push button Overload pilot lights Elapsed time meters Individual disconnect switches Electrical alternation (duplex system) Level Controls Ball and rod type float switch governs the control of pump operation based on sump liquid level. Level controls are mounted on a cast iron pedestal and bolted to sump cover plate. Features Copper ball, brass float rod and stops, float guide pipe and cast iron pedestal Mechanical alternator with emergency start position is supplied with duplex units Optional Features High level alarm devices are mounted on sump cover plate and can be provided in two types: a) nema 1 compression type switch with integral buzzer and alarm contract b) Ball & rod float switch, to be wired to separate alarm panel or alarm bell nema or nema 7 enclosure Bulb-type level controls supplied with mounting plate, electrical connectors, and level control support Cover Plate and Curb Frame Circular or square sump cover plate and curb frame can be supplied with openings for simplex or duplex pump configurations. Cover plate includes 3" (7mm) npt threaded vent and inspection cover. Senses static head pressure between media and bellows in the switch enclosure As liquid level rises, trapped air in compression pipe causes bellows to expand and trips the microswitch activating an external circuit as well as an integral alarm compression high water switch float switch

5 Composite Charts 170 rpm capacity - L/s 1 3 total head - feet E-3 0-1KB E-9 2-1KE E D E-3 2-2D E-3 2-2KE E-1 0-3D E E total head - meters E- 0 -D curve no. pump size max. solid size E-3 0 1A/bh Bilge Water only E D Bilge Water only E-3 2 2D Bilge Water only E-9 2 1KE Bilge Water only E-3 2 2KE Bilge Water only E-1 0 3D 2" (0mm) dia. E- 0 D 2AA/db" (mm) dia. E-71 0 E 2AA/db" (mm) dia. capacity - USgpm capacity - L/s E-0 2-1KE E- 2-2KE rpm total head - feet 9 E-3 0-2D E- 2 2D E-2 0-3D E-72 0-E 7 E- 0 -D curve no. pump size max. solid size E-3 0 2D Bilge Water only E- 2 2D Bilge Water only E-0 2 1KE Bilge Water only E- 2 2KE Bilge Water only total head - meters 3 E-2 0 3D 2 (0mm) dia. E- 0 D 2AA/db (mm) dia. E-72 0 E 2AA/db" (mm) dia capacity - USgpm

6 Series 000 Section & Parts List Series 0 Sump Pump Series 2 Sump Pump Series 0 Sewage Pump item no. description item no. description item no. description 1 Volute 12 Discharge Pipe Screw & Washer 332 Grease Fitting 2 Impeller 1 Cover Plate & Lower Bearing 333 Lock Nut 3 Lower Discharge Elbow 2 Cover Plate Screw 33 Shaft Volute Screw Motor Support 3 Impeller Key Discharge Flange 7 Motor Screw 31 Coupling Key 7 Discharge Flange Gasket 223 Support Screw 33 Pipe Nipple Flange Nut 22 Column Pipe 3 Pipe Coupling 9 Flange Bolt 2 Intermediate Bearing Screw 3 Tube Connector 11 Impeller Nut 22 Intermediate Bearing Nut 3 Elbow 11 Impeller Washer 3 Ball Bearing 37 Lubrication Tube 123 Strainer Intermediate Bearing Assembly 3 Bearing Collar 12 Discharge Pipe 31 Snap Ring 39 Bearing Frame Screw 1 Strainer Screw 321 Oil Seal 1 Coupling 12 Suction Plate 331 Grease Fitting 01 Motor 127 Discharge Elbow 03 Floor Plate

7 Dimensional Data round square round square cover plates - simplex units inches (mm) a sump size b motor frame size inches (mm) cover plates - duplex units inches (mm) pump size inches (mm) e 1½b 2d 2d 1½e 2½e 3d d e 2 () 2 (711) 3 (7) 3 (7) 1N (32) 1N (32) 1O () 1 () N () N () (72) 3 () (2) (2) 1O () 1O () 1N (32) (2) 2O (70) 2O (70) 3 (91) (1) (3) (3) 3O (9) 3O (9) 3N (3) (2) O (121) O (121) 2 (7) (11) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) (1219) (1372) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) (1372) 0 (2) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 0 (2) (17) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 72 (129) 7 (191) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 2 () 2 (711) 3 (7) 3 (7) 1N (32) 1N (32) 1O () 1 () N () N () (72) 3 () (2) (2) 1O () 1O () 1N (32) (2) 2O (70) 2O (70) 3 (91) (1) (3) (3) 3O (9) 3O (9) 3N (3) (2) O (121) O (121) 2 (7) (11) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) (1219) (1372) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) (1372) 0 (2) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 0 (2) (17) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 72 (129) 7 (191) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) series c 13tc 1tc 12tc 1tc 213tc 2tc tc tc 0 H (approx.) 2 & 0 H (approx.) a sump size b 1X (22) 21K () 1K (19) 22 (9) 17K () 22 (9) O (7) K () e 2N (7) 27O (70) 2O (7) ½b 2d 2d 1½e 2-1/2e 3d d e 3 (91) (1) 2 (1) 2 (1) 2N (7) 2N (7) 2O (70) 0 (0) 1O () 1O () 2 (7) (11) (2) (2) 1O () 1O () 1N (32) (2) 2O (70) 2O (70) (1219) (1372) 9 (229) 9 (229) O (121) O (121) N () 7 (17) O (1 O (1 12 (1372) 0 (2) () () O (1) O (1) N (133) (3) O (171) O (171) 1 0 (2) (17) () () O (1) O (1) N (133) (3) O (171) O (171) 1 72 (129) 7 (191) 12 () 12 () 7O (197) 7O (197) 7N (1) () O (222) O (222) 1 3 (91) (1) (3) (3) 3O (9) 3O (9) 3N (3) (2) O (121) O (121) 2 (7) (11) 9 (229) 9 (229) O (121) O (121) N () 7 (17) O (1) O (1) 11 (1219) (1372) 11 (279) 11 (279) O (171) O (171) N (9) 9 (229) 7O (197) 7O (197) 12 (1372) 0 (2) () () O (1) O (1) N (133) (3) O (171) O (171) 1 0 (2) (17) () () O (1) O (1) N (133) (3) O (171) O (171) 1 72 (129) 7 (191) 13 (3) 13 (3) O (222) O (222) N (2) 11 (279) 9O (2) 9O (2) 1 sump depth in feet (m) no. of intermediate bearings 0 to 3. (0 to 1.07) (0) 0 0 to. (0 to 1.) (2+0) 0 to (1.2 to 1.9) (0) 1 to (1. to 2.) (2+0) 1. to (2 to 2.) (0) 2 9 to 12 (2.7 to 3.7) (2+0) 2 (0) 3 pump size 0 1½b 0 2d 2 2d 2 1½e 2 2½e 0 3d 0 d 0 e ½ (1) 7 (17) 11V (23) N (20) 11N (2) 9 (229) Y (27) 11Y (2) O f g pump discharge K (11) (127) 2N (7) 3 (7) 3 (7) (9) 7N (1) 7N (1) Screwed 1½" npt Screwed 2" npt Screwed 2" npt Screwed 1½" npt Screwed 2½" npt Screwed 3" npt Flanged " 1#asa Flanged " 1#asa k note 1: High water alarm furnished only when specified. note 2: Sump depth determined by actual job requirements. note 3: Series 0 and 2 have Vertical Discharge. Series 0 has Elbow Discharge. *Dimensions f, g, & h apply to both Simplex and Duplex units. Denotes minus dimension as centerline of pump is left of cover plate center.

8 Typical Specifications Furnish and install, as illustrated on the plans & specifications, an Armstrong Series 000 simplex or duplex pumping system. pumps - 0 Sump Pump shall be Model: 0 vertical centrifugal, flexible coupled for sump service. Each pump shall provide USgpm at feet of tdh at a speed of rpm. Pump length will be suitable for a pit depth of feet. The pump casing shall be cast iron with a bronze enclosed impeller complete with a cast iron inlet strainer. Pump shaft shall be one piece centerless ground stainless steel. Pump shaft shall be guided by grease lubricated upper ball bearing and intermediate bronze sleeve type column bearing(s). Pump column assembly is constructed of threaded steel schedule 0 pipe. Intermediate bearing(s) are greased by a lubrication system consisting of ¼" (.3mm) copper grease lines and Alemite fittings terminating at floor plate. pumps - 2 Sump Pump shall be Model: 2 vertical centrifugal, flexible coupled for sump service. Each pump shall provide USgpm at feet of tdh at a speed of rpm. Pump length will be suitable for a pit depth of feet. The pump casing shall be cast iron with a bronze enclosed impeller complete with a cast iron inlet strainer. Pump shaft shall be one piece 1¼" (32 mm) diameter carbon steel or turned and polished stainless steel. Pump Shaft shall be guided by grease lubricated upper ball bearing and intermediate bronze sleeve type column bearing(s). Flanged steel column assembly is complete with register fit guide bearing housings to ensure proper alignment. The upper bearing(s) will be ball type, heavy duty grease lubricated, mounted in a raised bearing housing to prevent moisture, and dust and dirt contact. Intermediate and lower bearing(s) are greased by a lubrication system consisting of ¼" (.3 mm) copper grease lines and Alemite fitting(s) terminating at floor plate. pumps - 0 Sewage Pump shall be Model: 0 vertical centrifugal, flexible coupled for sewage service. Each pump shall provide USgpm at feet of tdh at a speed of rpm. Pump length will be suitable for a pit depth of feet. Pump shall be capable of passing solids sizes of 2" (1 mm) and 2½" ( mm). The pump casing shall be cast iron complete with a non-clog cast iron 2 vane open type impeller. Pump shaft shall be one piece 1¼" (32 mm) diameter carbon steel or turned and polished stainless steel. Pump shaft shall be guided by grease lubricated upper ball bearing(s) and intermediate bronze sleeve type column bearing(s). Flanged steel column assembly is complete with register fit guide bearing housings to ensure proper alignment. Packing seal provides GAS TIGHT construction. The upper bearing(s) will be a ball type, heavy duty grease lubricated, mounted in a raised bearing housing to prevent moisture, and dust and dirt contact. Intermediate and lower bearing(s) are greased by a lubrication system consisting of ¼" (.3 mm) copper grease lines and Alemite fitting(s) terminating at floor plate. motor Pump motor shall be a vertical type round body design. Motor horsepower shall be not less than hp, volts, phase, 0 Hz. Motor Enclosure shall be odp, tefc or Explosion Proof. optional construction: 2 & 0 pumps Cutless Rubber Lower & Intermediate Sleeve Bearings: Cutless Rubber Lower & Intermediate Sleeve Bearings are provided to handle abrasive liquids without scoring or damaging the shaft. A separate fresh water line connection is provided for connection to outside source with solenoid valve (supplied by others) to be energized when pump motor operates. Pumps are complete with stainless steel shaft for longer bearing life. Graphite Lower & Intermediate Bearings: Graphalloy intermediate and lower bearings are provided to handle liquids above 0 f ( c). Pump is complete with stainless steel shaft for longer bearing life. For condensate applications, pump is complete with bronze impeller. pump control Pump control shall be ball & rod mechanical float switch. Unit consists of copper ball, brass rod & stops. Float switch is mounted on a cast iron pedestal and bolted to sump cover plate. Duplex unit with mechanical alternating float switch complete with high level emergency start position turning on both pumps in case of high liquid level. high level alarm System shall include compression type high water alarm complete with alarm buzzer and additional contact for remote signaling. Alarm shall be housed in a nema 1 enclosure and mounted on sump cover plate. control panel Armstrong series 000 systems shall include nema 1 Control Panel with the following Standard Features: ul 0 or csa approved Main Disconnect Thermal and Short Circuit Protection using Internal Circuit Breakers Failure Protection with Automatic Transfer to Non-Operating Pump (Duplex System) Control Transformer with Fused Primary (ul 0 only) Power-On and Pump-Run Indicating Light Hand-Off-Automatic Selector Switch optional control features nema 2, 3,, x or 7 Enclosure High Level Buzzer or " (1 mm) Bell, Indicating Light and Silence Reset Push Button Overload Pilot Lights Elapsed Time Meters Individual Disconnect Switches cover plate and curb frame Circular or square sump cover plate and curb frame shall be supplied with openings for simplex and duplex pump configurations. Cover plate includes 3" (7 mm) npt threaded vent and inspection cover. S. A. Armstrong Limited 23 Bertrand Avenue Toronto, Ontario Canada, M1L 2P3 T: F: Armstrong Pumps Inc. 93 East Avenue North Tonawanda, New York U.S.A., 11-9 T: F: Armstrong Integrated Limited Wenlock Way Manchester United Kingdom, M12 JL T: + (0) 1 1 F: + (0) 1 1 S. A. Armstrong Limited 13 For Armstrong locations worldwide, please visit