Virtue. Porcelain Stone. Distinctly American. Uniquely Crossville.

Size: px

Start display at page:

Download "Virtue. Porcelain Stone. Distinctly American. Uniquely Crossville."

Betty Powers
6 years ago
Views:

1 Virtue Porcelain Stone Distinctly American. Uniquely Crossville.

2 Color Palette AV261 Available in UHT and SHT finish AV261 Virtue 3 x 6 UHT

3 Virtue Porcelain Stone Cleaner. Greener. Smarter. The look of marble, more marvelous than ever Virtue porcelain tile captures the look of the world s purest white marbles, while out performing Mother Nature on every front. Not only is porcelain stain-resistant and stronger than marble, Virtue is treated with Hydrotect, Crossville's interior formula that will never wash or wear off. This extremely virtuous tile is available in: field tiles ranging from 3 x 6 to 24 x 24 4 x 24 single bullnose trim 2 x 12 cove base with a 2 x 2 inside and 2 x 4 outside corners 2 x 2 hexagon mesh mounted mosaics 3 x 3 mesh mounted mosaics plank sizes upon request Virtue is made in the U.S.A. through Crossville s EcoCycle Tile Process, it contains a minimum 4% recycled content and is Green Squared Certified a beautifully responsible selection for your next design project. AV261 Virtue 6 x 24, UHT finish

Specifications Sizes & Finishes Field Tile Virtue tiles are treated with Hydrotect interior technology. For exterior, please call for lead times.

5 AV261.10606UHT AV261.10606SHT 6 x 24 147 x 597 10.5 AV261.10624UHT AV261.10624SHT 12 x 12 297 x 297 10.5 AV261.11212UHT AV261.11212SHT 12 x 24 297 x 597 10.5 AV261.11224UHT AV261.

Actual measurements stated in mm indicate tile is rectified. Mosaics Nominal (in) Actual (mm) Thickness (mm) UHT Finish SHT Finish 2 x 2 Hex * 47 x 47 10.5 AV261.

** Mesh mounted on a 297mm x 297mm sheet (3mm grout joint).

512CR 3 x 12 Crown Molding* 75 x 297 9.5 AV261.10312CM 6 x 12 Base Molding* 150 x 297 9.5 AV261.10612BM 4 x 24 Bullnose 96 x 597 10.5 AV261.1424BNUHT AV261.

1204OSCHT 4 x 24 Single Bullnose 6 x 12 Base Molding* 2 x 12 Cove Base 3 x 12 Crown Molding* 2 x 2 Inside Cove Base Corner 1-1/2 x 12 Chair Rail* 2 x 4 Outside Cove Base Corner *Globally

52 AcuTest sm SHT 0.31-0.41 AcuTest sm Shade & Texture Index Virtue has a shade variation of V2.

4 Specifications Sizes & Finishes Field Tile Virtue tiles are treated with Hydrotect interior technology. For exterior, please call for lead times. Nominal (in) Actual (mm) Thickness (mm) UHT Finish SHT Finish 3 x 6 72 x AV UHT AV SHT 3 x 6 Picket 72 x AV UHTPCK AV SHTPCK 6 x x AV UHT AV SHT 6 x x AV UHT AV SHT 12 x x AV UHT AV SHT 12 x x AV UHT AV SHT 24 x x AV UHT AV SHT Actual measurements stated in inches indicate tile is calibrated (non-rectified). Actual measurements stated in mm indicate tile is rectified. Mosaics Nominal (in) Actual (mm) Thickness (mm) UHT Finish SHT Finish 2 x 2 Hex * 47 x AV261.12UHTHEX 3 x 3 Square ** 72 x AV UHTMOS AV SHTMOS * Mesh mounted on a 289.4mm x 267.5mm sheet (3.5mm grout joint). ** Mesh mounted on a 297mm x 297mm sheet (3mm grout joint). Sizes UHT & SHT Finish 24 x x 24 Coordinating Trim Nominal (in) Actual (mm) Thickness (mm) UHT Finish SHT Finish 1-1/2 x 12 Chair Rail* 30 x AV CR 3 x 12 Crown Molding* 75 x AV CM 6 x 12 Base Molding* 150 x AV BM 4 x 24 Bullnose 96 x AV BNUHT AV BNSHT 2 x 12 Cove Base 45 x AV CBHT 2 x 2 CB Inside Corner 45 x AV ISCHT 2 x 4 CB Outside Corner 45 x AV OSCHT 4 x 24 Single Bullnose 6 x 12 Base Molding* 2 x 12 Cove Base 3 x 12 Crown Molding* 2 x 2 Inside Cove Base Corner 1-1/2 x 12 Chair Rail* 2 x 4 Outside Cove Base Corner *Globally Sourced Hydrotect not available Product Performance Breaking Strength >500 lbf ASTM C648 Bond Strength >200 psi ASTM C482 Chemical Resistance Unaffected ASTM C650 Frost Resistance Resistant ASTM C1026 Water Absorption <0.20% ASTM C373 Scratch Hardness 6 Mohs Scale 12 x 12 6 x 24 3 x 6 6 x 6 3 x 6 Pattern made from 3 x 3 Mosaics & 3 x 6 Pickets Wet Dynamic Coefficient of Friction Range UHT AcuTest sm SHT AcuTest sm Shade & Texture Index Virtue has a shade variation of V2. V1 V2 V3 V4 V1 Uniform appearance V2 Slight Variation V3 Moderate Variation V4 Substantial Variation This porcelain tile product is produced with a V2 variation. Expect that the amount of color and texture on each piece may vary slightly. Inspect the product upon delivery and for best results, blend tile from several cartons during installation. 2 x 2 Hex Mosaics UHT Finish Mesh mounted on a 289.4mm x 267.5mm sheet UHT Unpolished with Cross-Sheen and Hydrotect finish imparts a subtle glow that enhances the color of the tile and also allows stains and scuff marks to be easily wiped off the surface. SHT Satin finish with Hydrotect. 3 x 3 Mosaics UHT/SHT Finish Mesh mounted on a 297mm x 297mm sheet Virtue satin requires a grout release prior to grouting. DO NOT use a penetrating sealer, as it will diminish or render ineffective the Hydrotect benefits.

Environmentally Conscious Virtue is made using Crossville's EcoCycle Tile Process, it contains a minimum 4 percent pre-consumer third-party recycled content and is Green Squared Certified.

In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back Program. For more information, visit CrossvilleInc.

Virtue is not recommended for exterior horizontal surfaces or exterior paving. The satin finish is not recommended for wet areas where standing water may occur.

If an offset greater than 33% is specified, specifier and owner must approve mock-up and lippage. See CrossvilleInc.com for detailed installation instructions.

Rinse thoroughly and dry with a soft cloth. No waxes are needed. Virtue satin requires a grout release prior to grouting.

5 Environmentally Conscious Virtue is made using Crossville's EcoCycle Tile Process, it contains a minimum 4 percent pre-consumer third-party recycled content and is Green Squared Certified. Through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back Program. For more information, visit CrossvilleInc.com/ green. Recommended Use Virtue is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Virtue is not recommended for exterior horizontal surfaces or exterior paving. The satin finish is not recommended for wet areas where standing water may occur. If offset pattern is required for tiles 15 inches or longer, Crossville recommends an offset of not greater than 33%. If an offset greater than 33% is specified, specifier and owner must approve mock-up and lippage. See CrossvilleInc.com for detailed installation instructions. Care and Maintenance Regular cleaning is the best way to keep Virtue tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. Virtue satin requires a grout release prior to grouting. DO NOT use a penetrating sealer, as it will diminish or render ineffective the Hydrotect benefits. More information regarding the care and maintenance of Crossville products is available at CrossvilleInc.com. Wet area use for Virtue mosaics Crossville produces the Virtue 2 x 2 hexagon and 3 x 3 mosaics with the Cross- Sheen (UHT) finish. The AcuTest sm wet Dynamic COF of Virtue is Their small sizes ensure frequent grout joints which provides traction and drainage. Crossville cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water and poor surface cleaning. This information is provided so that customers may make a realistic and informed decision when comparing Virtue to other tile products in wet area environments, such as residential/ commercial bathrooms, showers, and interior pool decks. Our Warranty Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com. Hydrotect Virtue tiles are treated with Hydrotect interior technology. Should exterior Hydrotect be desired, please call for lead times. Virtue satin requires a grout release prior to grouting. DO NOT use a penetrating sealer, as it will diminish or render ineffective the Hydrotect benefits. Not availabe on Base Molding, Crown Molding or Chair Rail. Information listed here is subject to change. Please refer to CrossvilleInc.com for the latest, most accurate information. AV261 Virtue 6 x 24, UHT finish Get Planked! Our Porcelain Stone products are available in popular plank shapes with no minimum order and quick fulfillment. See website for more details and sizes. AV261 Virtue 12 x 24 & 24 x 24, UHT finish Trade Organizations Environmentally Aware Available

6 Virtue Porcelain Stone LIT-VIRTUE-17_R AV261 Virtue 24 x 24, UHT finish Crossville, Inc. PO Box 1168 Crossville, TN Phone Fax Samples Web Samples@CrossvilleInc.com Crossc@CrossvilleInc.com CrossvilleInc.com

Virtue. Porcelain Stone. Distinctly American. Uniquely Crossville.

Virtue. Porcelain Stone. Distinctly American. Uniquely Crossville. Virtue Porcelain Stone Distinctly American. Uniquely Crossville. Color Palette AV261 Available in UPS and SAT finish AV261 Virtue 24 x 24, 6 x 24 & 6 x 6, UPS finish Specifications Sizes & Finishes Field