Close Coupled Sump Pumps Type ETLB

Size: px
Start display at page:

Download "Close Coupled Sump Pumps Type ETLB"

Transcription

1 Close Coupled Sump Pumps Type ETLB»dry running safe«technical data Flow rate Q up to 104 m 3 /h Head H up to 36 m Submersion depth up to 775 (795) mm Suction extension up to 1500 mm Materials limits of use PP up to 70 C PVDF up to 90 C Pressure socket nominal width DN DN 80 Drive capacity up to 7,5 kw Design Vertical single-stage sump pump, dry running safe Sizes ETLB to ETLB Technical design Immersion depth: 275 mm, 475 mm and 775 mm Materials: PP, PVDF Screwless thermoplastic spiral casing Closed impeller, fastened on the motor shaft independent of the rotational direction Stainless steel shaft separated from the fluid by a thick-walled thermoplastic protection tube Shaft lead-through at the mounting plate with lip seals to protect against fluid vapours Radial and axial forces are absorbed by reinforced motor bearings Drive Three-phase motor, 0.18 kw to 7.5 kw, IP 55 Corrosion protection by a 2C protection paint coat Options/Accessories: Titanium drive shaft and labyrinth seal Suction extension Suction strainer Application Electroplating plants Chemical plants Water treatment Process engineering Utilisation ASV vertical sump pumps are designed for operation in open and closed, depressurized containers or pits, for simple draining and circulation of the fluid. Flow Media Neutral and aggressive fluids, provided that the pump components coming into contact with the fluid are resistant at the operating temperature in accordance with the ASV resistance guide. Heavily crystallising fluids require special equipment with titanium shafts and titanium labyrinth seals. Data sheet no.: /09/21 All rights for technical modifications withheld ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de 1

2 Viscosity Media to appr. 160 mpas (160 cp). Examinations DIN EN ISO 9906 Pressure connection Threaded necks acc. DIN 8063 on request with pressure connection band, union sockets or spigot ends acc. ISO/DIN optional with flange connection acc. DIN 2501, standard on ETLB Suction connection Suction connection (standard) upon request with strainer on the pump housing (mesh width or holes according to design data) upon request with suction tube extension for container draining Constructional features Pump housing and impeller The pump housing is designed in two sections. For the ETLB to , the housing lid and pump housing are designed as a screw connection (exception is ETLB 15-60), and thus completed without additional screws. The closed impellers with vanes of a shape to enhance the fluid flow are made by state of the art plastic injection moulding technology. The impeller is fastened independent of the rotational direction. The impeller shaft is protected against contact with the fluid by means of an impeller hub cap and O-ring. A suction strainer (option) protects the pump and prevents the impeller from blocking when solid or fibrous material is processed. O-rings CSM; EPDM; FPM or FEP V-ring FPM Driver lantern G-ALSi 10 Mg ( ) Connection screws (only for ETLB 15-60) CrNi-steel (1.4571) or PVDF Immersion depth 275 (295) mm 475 (495) 1) mm 775 (795) 1) mm 1) ETLB only with 495 mm and 785 mm Drive ASV vertical sump pumps are driven by specially designed IEC 3-phase-current- motors with extended shaft. Design: IM B5 or IM B14 Voltage: 230/400 or 400/690 V Speed: 1450/1750 rpm, 50/60 Hz or Speed: 2900/3500 rpm, 50/60 Hz Protection: IP 55 Protection cap: V 1 or V 18 Immersion and shaft protection tube The thick-walled immersion tube as well as the pump shaft guarantee vibration free operation and prevent the pump elements from getting into contact with the pump housing. Drainholes in the immersion tube prevent admission of the pumping medium into the shaft exit. The drive shaft is separated from the medium by means of a thermoplastic protection tube. Shaft exit Special V-rings at the shaft exit prevent vapour from escaping into the atmosphere. Materials In standard ASV sump pumps are made of the highmolecular thermoplastic materials Polypropylene (PP) and Polyvinylidene fluoride (PVDF), using the pumps in extreme abrasive fluids the components subject to increased wear are made of UHMW-PE. Because of the ASV Stübbe modular design system the proven components of the ASV standard chemical pumps can be used for the sump pumps as well. The robust construction adapted to thermoplastics demands a minimum of maintenance. All rights for technical modifications withheld Data sheet no.: /09/21 2 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de

3 Information Suction behaviour In order to insure malfunction free operation of the ASV vertical sump pumps observe the installation dimensions O, Z, V and Y in the dimensional table during the planning and assembly. Dimensions O, Z, V und Y are minimum dimensions. Dropping below these dimensions will result in reduced output, vibrations and/or pump damage. Each time a container is emptied, fill the container to above the minimum fluid level prior to restarting the pump unit. Always ensure the minimum covering dimension»z«of the pump housing when starting the unit. For higher operating temperatures observe the steam pressure of the medium and if necessary increase»z«appropriately. Terminology definition Fuid level»max.«maximum admissible fluid level top switching point for level control Fluid level»min.«lowest admissible fluid level each time the pump unit is started up bottom switching point for level control during commissioning/start-up of the pump unit ETLB pumps for dry-well installation max. min. ETLB pump with suction extension For the dry-well installation, the pump is arranged outside of the container Data sheet no.: /09/21 All rights for technical modifications withheld ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de 3

4 Dimensions option Protection cap Dimensions of the pump type NW motor dimensions (mm) size DND kw B1 B2 B3 b E h L I O R Vmin. Z X Ymin ,18-0,37 1) ,25-0,75 1) / ,37-1,50 1) / ,50-4,00 1) ,00-7,50 1) ,20-5,50 1) / ,00-7,50 1) / ,00-7,50 1) / ,00-7,50 2) Sizes - allocation 2) type size capacity kw BG BG BG BG BG BG BG BG ) BG Motor size G (mm) weight (kg) BG ,7-7,6 kg BG BG BG BG BG ) n = 2900 rpm, 50 Hz 3) n = 1450 rpm, 50 Hz All rights for technical modifications withheld Data sheet no.: /09/21 4 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de

5 Dimensions mounting plate ETLB up to Dimensions assembly opening ETLB up to mounting plate ETLB up to assembly opening ETLB up to type mounting plate assembly opening weight (kg) without motor size ß d1 K M s Q N P U PP PP PP PVDF PVDF , ) 4) - 4) 4) , ,5 4,0 9,0 3,5 6, , ,0 7,0 13,0 7,5 10, , ,5 11,0 20,0 12,5 16, , ) 4) - 4) 4) , ) 4) 4) 4) 4) , ) 4) - 4) 4) , ,0 38,0-43,0 48, , ) 55,0-4) 4) on request Data sheet no.: /09/21 All rights for technical modifications withheld ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de 5

6 Caracteristic curves ETLB n = 1450 rpm; 50 Hz head H (m) flow rate Q (m 3 /h) n = 2900 rpm; 50 Hz head H (m) flow rate Q (m 3 /h) All rights for technical modifications withheld Data sheet no.: /09/21 6 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de

7 Data sheet no.: /09/21 All rights for technical modifications withheld ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de 7

8 Subject to technical modifications All rights for technical modifications withheld Data sheet no.: /09/21 8 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D Vlotho Fon +49 (0) Fax +49 (0) contact@asv-stuebbe.de

Close Coupled Sump Pumps

Close Coupled Sump Pumps Close Coupled Sump Pumps Brochure Type ETLB Dry running safe made for your process Close Coupled Sump Pumps Type ETLB»dry running safe«technical data Flow rate Q up to 104 m 3 /h Head H up to 36 m Submersion

More information

Pumps. Pumps Valves Instrumentation

Pumps. Pumps Valves Instrumentation Valves Instrumentation Standards in perfection and safety ASV Stübbe is an international manufacturer of pumps, valves, instrumentation and control systems made of thermoplastics. As a system supplier,

More information

MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps

MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps PFA PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Lined Type Sealless Corrosion Resistant Chemical Pumps MJ / MJ-B Series Sealless, Fluoropolymer Lined,

More information

Company Profile. Pumps Valves Instrumentation

Company Profile. Pumps Valves Instrumentation Pumps Valves Instrumentation Reliability and resistance Pumps Valves Instrumentation ASV Stübbe is an international manufacturer of pumps, valves, instrumentation and control systems made of thermoplastics

More information

Richter Lined Mechanically Sealed ISO/DIN and ASME/ANSI Pumps

Richter Lined Mechanically Sealed ISO/DIN and ASME/ANSI Pumps Richter Lined Mechanically Sealed ISO/DIN and ASME/ANSI Pumps Corrosive, solid-laden and pure fluids RSI, RSA Temperatures to 1 C (3 F) Virgin PFA/PTFE without fillers All common seal makes Very easy maintenance

More information

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm

More information

CombiSump. Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610

CombiSump. Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610 CombiSump Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610 CombiSump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system,

More information

Tip. For detailed information on the motors please refer to pages

Tip. For detailed information on the motors please refer to pages 48 49 We select the materials with regard to the liquids to be pumped. Both the pump tube models feature an extremely resistant pure carbon bearing and there are no grease fillings in the shaft tube, so

More information

Product Range Non-Metallic Pumps

Product Range Non-Metallic Pumps Product Range Non-Metallic Pumps In / PE-UHMW / / PFA Types Horizontal with Magnetic Drive Horizontal with Mechanical Seal Vertical with Labyrinth Seal Vertical with Mechanical Seal Cantilever Pump Your

More information

Submersible Borehole Pump. Ixo N. Type Series Booklet

Submersible Borehole Pump. Ixo N. Type Series Booklet Submersible Borehole Pump Ixo N Type Series Booklet Legal information/copyright Type Series Booklet Ixo N All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI

NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm

More information

BEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103

BEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance

More information

Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB

Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB SUBMERSIBLE MULTISTAGE PUMPS SB 3 CONTENENTS 50 Hz Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB 3 15-23-30-45 203 - CONSTRUCTIONS

More information

Self-Priming pumps, when it really matters

Self-Priming pumps, when it really matters Self-Priming pumps, when it really matters Horizontal Self-Priming pump www.komak.nl Engineered pump solutions Specially designed and manufactured, by KOMAK, to operate under the most difficult conditons.

More information

All product images are indicative only General characteristics

All product images are indicative only General characteristics submersible pumps PRODU AALOGUE 0 Multi-channel open impeller All product images are indicative only General characteristics Multi-channel open impeller motor power, 9, kw poles / / 6 discharge DN80 DN50

More information

Richter Sealless Chemical Magnetic Drive Pumps

Richter Sealless Chemical Magnetic Drive Pumps Richter Sealless Chemical Magnetic Drive Pumps MNK, MNK-B Up to 00 m /h Reinforced plain bearing engagement Linings PFA/PTFE, PFA-L, PE, PFA-P Richter sealless chemical magnetic drive pumps Fields of application

More information

Pump Specifications 450 Series 1/2 hp Submersible Sump Pump

Pump Specifications 450 Series 1/2 hp Submersible Sump Pump Pump Specifications 450 Series 1/2 hp Submersible Sump Pump 450_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 450-Series Dimensional

More information

G2D Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10075SSD-1 Section: Performance Data Dated: January, 2011

G2D Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10075SSD-1 Section: Performance Data Dated: January, 2011 100 Best Efficiency Point 90 80 70 TDH (ft) 60 50 40 30 20 10 The curve reflects maximum performance characteristics without exceeding full load (Nameplate) horsepower. Operation is recommended near the

More information

Series description Wilo-Drain STS 40

Series description Wilo-Drain STS 40 Series description Wilo-Drain STS 40 Series description Wilo-Drain STS 40 Subject to change 09/2008 WILO SE Wilo Catalogue C2 - - Sewage pumps from DN 32 to DN 800 Materials Pump housing: EN-GJL-250 Pedestal:

More information

G2DT Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10074SSD-1 Section: Performance Data Dated: January, 2011

G2DT Series Performance Data Discharge: 1-1/4 Solids: 1/4. Wholesale Products Page: JP10074SSD-1 Section: Performance Data Dated: January, 2011 100 Best Efficiency Point 90 80 70 TDH (ft) 60 50 40 30 20 10 The curve reflects maximum performance characteristics without exceeding full load (Nameplate) horsepower. Operation is recommended near the

More information

Model EVMS Vertical Multistage Pumps for the Global Market

Model EVMS Vertical Multistage Pumps for the Global Market New Products & New Techniques Model EVMS Vertical Multistage Pumps for the Global Market Hiroyuki KAWASAKI*, and So KUROIWA* Abstract As key products for the global market, new model EVMS stainless vertical

More information

SMP. Single-channel closed impeller. submersible pumps PRODUCT CATALOGUE General characteristics

SMP. Single-channel closed impeller. submersible pumps PRODUCT CATALOGUE General characteristics submersible pumps PRODU AALOGUE 04 Single-channel closed impeller All product images are indicative only General characteristics Single-channel closed impeller motor power,0 kw 6,4 kw poles / 4 / 6 discharge

More information

CombiSump. Sump pump

CombiSump. Sump pump CombiSump Sump pump CombiSump Centrifugal sump pump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system, a modular programme of single stage centrifugal

More information

- SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE OPTIMA 203

- SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE OPTIMA 203 CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE

More information

Product information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.

Product information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1. Product information Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 Description Normal priming centrifugal pumps with a double Mechanical seal Application:

More information

OUR POWER, YOUR SATISFACTION

OUR POWER, YOUR SATISFACTION OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DH / JH series NR_BCH_EN_003 R03 28/09/2016 Hopper series The Diamond Series with hopper an auger feed screw to convey directly the product

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300

More information

DRUM PUMPS ALU FOR NEUTRAL LIQUIDS IN ALL INDUSTRIES THE RIGHT DRUM PUMPS

DRUM PUMPS ALU FOR NEUTRAL LIQUIDS IN ALL INDUSTRIES THE RIGHT DRUM PUMPS SEALLESS DRUM PUMPS ALU FOR NEUTRAL LIQUIDS IN ALL INDUSTRIES THE RIGHT DRUM PUMPS - This saves maintenance costs - This avoids malfunctions - This saves time - This saves money take out, what s in. Aluminium

More information

NUCLEAR POWER CORPORATION OF INDIA LTD TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 REV NO : 0 DATA SHEET A

NUCLEAR POWER CORPORATION OF INDIA LTD TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 REV NO : 0 DATA SHEET A TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 DATA SHEET A ANNEXURE - A Sr. Item Description Sr. Item Description A. GENERAL DATA B. PUMP DUTY PARAMETERS 1. System Name 1. Rated capacity,

More information

Industrial Pumps MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS

Industrial Pumps MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS 1 Lindenwood Drive, Suite 5 Malvern Pennsylvania 19355 T 8.875.308 F 8.875.973 E sales@specialtyplastics.com Industrial Pumps MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS Magnetic Drive Pumps

More information

OUR POWER, YOUR SATISFACTION

OUR POWER, YOUR SATISFACTION OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DN / JN series NR_BCH_EN_002 R01 25/01/2016 Flanged Industrial Series The DN and JN Diamond series is the best solution for the industrial sector

More information

CUP-VS4. Heavy Duty, Vertical Sump Pumps, API 610 / ISO 13709

CUP-VS4. Heavy Duty, Vertical Sump Pumps, API 610 / ISO 13709 Heavy Duty, Vertical Sump Pumps, API 6 / ISO 3709 SPX - An introduction SPX is a Fortune 500 multi-industry manufacturing leader, headquartered in Charlotte, North Carolina. SPX manufactures and markets

More information

In-line Twin Pump. Type Series Booklet. Omega DSL

In-line Twin Pump. Type Series Booklet. Omega DSL In-line Twin Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed

More information

CUP-VS4. Heavy Duty, Vertical Sump Pumps, API 610 / ISO 13709

CUP-VS4. Heavy Duty, Vertical Sump Pumps, API 610 / ISO 13709 Heavy Duty, Vertical Sump Pumps, API 6 / ISO 3709 SPX - An introduction SPX is a Fortune 500 multi-industry manufacturing leader, headquartered in Charlotte, North Carolina. SPX manufactures and markets

More information

DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART

DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART (For Cast Iron and Concrete Pipes See Note at Right) Lay a straightedge on scales

More information

High Pressure Centrifugal Pumps LHK & MHK & HK

High Pressure Centrifugal Pumps LHK & MHK & HK High Pressure Centrifugal Pumps LHK & MHK & HK 2 Applications Technical Design Fields of Application Handling of corrosive and abrasive liquids with up to 5 % solids Design Horizontal, radial split, ring

More information

OUR POWER, YOUR SATISFACTION

OUR POWER, YOUR SATISFACTION OUR POWER, YOUR SATISFACTION DIAMOND SERIES Industrial pumps DH / JH series NR_BCH_FR_003 R00 25/02/2016 Hopper series The Diamond Series with hopper an auger feed screw to convey directly the product

More information

Pressure Booster System. Hya-Eco VP. Type Series Booklet

Pressure Booster System. Hya-Eco VP. Type Series Booklet Pressure Booster System Hya-Eco VP Type Series Booklet Legal information/copyright Type Series Booklet Hya-Eco VP KSB Aktiengesellschaft Frankenthal All rights reserved. Contents provided herein must neither

More information

Introduction. Ultra Reliable

Introduction. Ultra Reliable Introduction www.finishthompson.com Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional

More information

Diaphragm seal with flange connection With internal diaphragm, threaded design Model

Diaphragm seal with flange connection With internal diaphragm, threaded design Model Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,

More information

10" Submersible Pump General Data

10 Submersible Pump General Data " Submersible Pump General Data Sr. No. Pump Components Bowl / Diffuser Impeller Wear Ring Shaft Shaft Sleeve Couple Delivery Casing Suction case Bearing Bush Strainer Screw P TYPE PUMP Cast Iron Grey

More information

Introduction. Ultra Reliable

Introduction. Ultra Reliable Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed

More information

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW

More information

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW

More information

CombiSump. Vertical long shaft sump pump, according to ISO 2858, EN 733, API 610 (VS4)

CombiSump. Vertical long shaft sump pump, according to ISO 2858, EN 733, API 610 (VS4) CombiSump Vertical long shaft sump pump, according to ISO 2858, EN 33, API 6 (VS4) Johnson Pump, An SPX FLOW Brand CombiSump SPX FLOW develops, manufactures and markets Johnson Pump branded positive displacement

More information

N-pump, Standard Motor

N-pump, Standard Motor N-pump, Standard Motor N-pump, Standard Motor Product description Usage Installation type P, S, T, Z Installation type L A submersible pump for efficient pumping of clean water, surface water, and wastewater

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 302

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 302 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 PERFORMANCE CURVE VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW

More information

GRUNDFOS alldos Data Booklet. Configurable Dosing Tank Stations

GRUNDFOS alldos Data Booklet. Configurable Dosing Tank Stations GRUNDFOS alldos Data Booklet DTS Configurable General / Functional scheme General description Dosing tank stations are designed for storing and dosing liquid chemicals. They can be configured with the

More information

PLASTIC PUMPS CPDR and RCNKu

PLASTIC PUMPS CPDR and RCNKu PLASTIC PUMPS CPDR and RCNKu Horizontal Standardised Chemical Pumps in a wide Range of Sizes and Materials. Rheinhuette Pumps, LLC 971 Virginia Avenue Suite B Palm Harbor, FL 34683 USA Phone: 727-753-0880

More information

Company profile WORKING FOR AN ESSENTIAL RESOURCE MEANS TAKING CARE OF THE FUTURE. w w w. r o v a t t i. i t

Company profile WORKING FOR AN ESSENTIAL RESOURCE MEANS TAKING CARE OF THE FUTURE. w w w. r o v a t t i. i t Company profile WORKING FOR AN ESSENTIAL RESOURCE MEANS TAKING CARE OF THE FUTURE w w w. r o v a t t i. i t THE PHILOSOPHY A successful international company strategy is built on its thorough understanding

More information

Richter Heavy Duty Lined Mag-Drive ASME/ANSI Pumps

Richter Heavy Duty Lined Mag-Drive ASME/ANSI Pumps Richter Heavy Duty Lined Mag-Drive ASME/ANSI Pumps MNKA Dry-run optimised SAFEGLIDE PLUS plain bearings Corrosion-resistant PFA/PTFE -3 to 8 C (- to 36 F) MNKA Richter heavy duty lined mag-drive ASME/ANSI

More information

Minerals. WARMAN Centrifugal Slurry Pumps WBV Vertical Cantilever Slurry Sump Pump Series

Minerals. WARMAN Centrifugal Slurry Pumps WBV Vertical Cantilever Slurry Sump Pump Series Minerals WARMAN Centrifugal Slurry Pumps WBV Vertical Cantilever Slurry Sump Pump Series The Warman WBV ultra heavy-duty range of vertical cantilevered slurry pumps sets a new industry benchmark for general

More information

Electromagnetic flowmeters. dg: NEW. Sensor MUT 2200 EL DS100-2-ENG 1/12

Electromagnetic flowmeters. dg:   NEW. Sensor MUT 2200 EL DS100-2-ENG 1/12 Electromagnetic flowmeters dg: www.oryana.com.ar NEW Sensor MUT EL DSENG 1/ Sensor MUT EL MUT EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process applications.

More information

MIT - GemmeCotti Magnetic Coupling Centrifug Pumps

MIT - GemmeCotti Magnetic Coupling Centrifug Pumps MIT - GemmeCotti Magnetic Coupling Centrifug Pumps Our Main Focus Heat Transfer Section Plate Heat Exchangers Brazed Heat Exchangers Flat Access Stations Shell and TubeHeat Exchangers Pressure Vessel Section

More information

Introduction. Ultra Reliable

Introduction. Ultra Reliable Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed

More information

Flygt 3045, 50Hz. Technical Specification

Flygt 3045, 50Hz. Technical Specification Flygt 3045, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and

More information

HPGR200 2 HP. Capacity-U.S. G.P.M.

HPGR200 2 HP. Capacity-U.S. G.P.M. Performance RPM: 3450 Discharge: 1-1/4" Solids: 2" Wholesale Products Page: 6710-1 Section: Performance 100 80 2 HP TOTAL HEAD IN FEET 60 40 20 0 0 10 20 30 40 50 Capacity-U.S. G.P.M. 60 The curves reflect

More information

VEY Molten Salt Pump for Concentrated Solar Power

VEY Molten Salt Pump for Concentrated Solar Power VEY Molten Salt Pump for Concentrated Solar Power Main Applications The VEY is a vertical mixed flow pump with high capacity and medium to high head. Its design includes hydraulics from proven ranges.

More information

G2S. Vertical Sump Pump

G2S. Vertical Sump Pump G2S Vertical Sump Pump G2S Our process-duty vertical sump pump for water, hydrocarbons, and acid and alkaline solutions. Modular in design, the G2S sump pump is made This pump comes standard with lip seals

More information

All product images are indicative only General characteristics

All product images are indicative only General characteristics submersible pumps PRODU AALOUE 04 Multi-channel open impeller All product images are indicative only eneral characteristics Multi-channel open impeller motor power poles discharge free max flow rate max

More information

TECHNICAL BROCHURE BBLASTER. Filtered Effluent Pump

TECHNICAL BROCHURE BBLASTER. Filtered Effluent Pump TECHNICAL BROCHURE BBLASTER Filtered Effluent Pump FEATURES Designed for pumping filtered effluent from processed septic systems only. Field Serviceable: Pump can be rebuilt in the field to like new condition

More information

HUP. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 1" Solids: 1/8" GPM: TDH:

HUP. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 1 Solids: 1/8 GPM: TDH: Performance RPM: 1550 Discharge: 1" Solids: 1/8" Wholesale Products Page: 6660-1 Section: Performance The curves reflect maximum performance characteristics without exceeding full load (Nameplate) horsepower.

More information

C o l u m n S u m p P u m p s

C o l u m n S u m p P u m p s Column Sump Pumps Column Sump Pumps Regent Column Sump Pumps are column versions of the popular Regent end suction centrifugal models. This style of pump is advantageous when pumping high temperature liquids

More information

Flygt 3057, 50Hz. Technical Specification

Flygt 3057, 50Hz. Technical Specification Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and

More information

Pressure Booster System. Hya-Eco VP. Type Series Booklet

Pressure Booster System. Hya-Eco VP. Type Series Booklet Pressure Booster System ya-eco VP Type Series Booklet Legal information/copyright Type Series Booklet ya-eco VP All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:

SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application: SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-

More information

VSS S U B M E R S I B L E S E W A G E P U M P S

VSS S U B M E R S I B L E S E W A G E P U M P S 7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55

More information

EC medium pressure axial fans. The efficient system solution.

EC medium pressure axial fans. The efficient system solution. EC medium pressure axial fans. The efficient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly efficient GreenTech EC technology is now available for

More information

Introduction. Ultra Reliable

Introduction. Ultra Reliable Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed

More information

Goulds API ISO / API 610 VS4 Vertical Sump Pump

Goulds API ISO / API 610 VS4 Vertical Sump Pump Goulds API 3171 ISO 13709 / API 610 VS4 Vertical Sump Pump API 3171 ISO 13709 / API 610 11 th edition, compliant VS4 sump pump Capacities to 680 m³/h (3000 GPM) Heads to 290 m (950 feet) Temperatures to

More information

Vacuum pumps for table top steam autoclaves

Vacuum pumps for table top steam autoclaves Vacuum pumps for table top steam autoclaves APPLICATION BROCHURE Steam sterilization process in autoclaves Steam sterilization is one of the best methods to neutralize micro-organisms. For a safe sterilization

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

Richter Chemical Control Valves

Richter Chemical Control Valves Richter Chemical Control Valves Heavy duty bellows for permeating media Corrosion-resistant PFA-lined DIN and ANSI face to face lengths Fields of application Control of corrosive, pure and/or slightly

More information

TECHNICAL HANDBOOK. ASME B73.1 Process Pump. Wilfley Sealing Technology. No Flush Water Required

TECHNICAL HANDBOOK. ASME B73.1 Process Pump. Wilfley Sealing Technology. No Flush Water Required TECHNICAL HANDBOOK ASME B3. Process Pump A Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley invented the Dynamic Expeller Seal almost a century ago and has continued

More information

Thermowell, weld-in or with flange (solid-machined) Version per DIN form 4, 4F Models TW55-6, TW55-7

Thermowell, weld-in or with flange (solid-machined) Version per DIN form 4, 4F Models TW55-6, TW55-7 Thermowells Thermowell, weld-in or with flange (solid-machined) Version per DIN 43772 form 4, 4F Models TW55-6, TW55-7 WIKA data sheet TW 95.55 Applications Chemical industry, process technology, apparatus

More information

Horizontal. In-line operation. 8 sizes. Probst & Class Special machines for industrial process technology Since 1926

Horizontal. In-line operation. 8 sizes. Probst & Class Special machines for industrial process technology Since 1926 Colloid mill Type EL Horizontal. In-line operation. 8 sizes. Probst & Class Special machines for industrial process technology Since 1926 Probst & Class Colloid Mill Type E Probst & Class Colloid mills

More information

Construction features Completely made in stainless steel AISI 304. Automatic cleaning. Permanent magnets, in neodymium

Construction features Completely made in stainless steel AISI 304. Automatic cleaning. Permanent magnets, in neodymium DISCONTINUOUS REFINING MILL SMD 800-1200 Double action refining mill (dispersion + milling) with discontinuous operation and wet milling for printing pastes, colorants and ceramic glaze. The belt transmission

More information

Technical specification. Submersible pump B 2125, 60 Hz

Technical specification. Submersible pump B 2125, 60 Hz Technical specification Submersible pump B 15, Hz Motor data Frequency Hz Insulation class H (+1 C) Voltage variation - continuously running max ± 5% - intermittent running max ± % Voltage imbalance between

More information

SHEF40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001

SHEF40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001 Performance RPM: 1550 Discharge: 1-1/2" Solids: 3/4" Wholesale Products Page: 6680-1 Section: Performance Dated: April 2002 Supersedes: January 2001 The curves reflect maximum performance characteristics

More information

Weir Specialty Pumps. WEMCO Torque-Flow

Weir Specialty Pumps. WEMCO Torque-Flow Weir Specialty Pumps WEMCO Torque-Flow HIGH LOW OIL LEVEL WEMCO Torque-Flow Model C WEMCO Torque-Flow Model C Materials of Construction Ni-Hard, High Chrome Configurations Horizontal Sealing Multiple options

More information

SUGGESTED SPECIFICATIONS Pump Frames through 64132

SUGGESTED SPECIFICATIONS Pump Frames through 64132 TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances

More information

Horizontal and Vertical End Suction Pumps

Horizontal and Vertical End Suction Pumps EN Horizontal and Vertical End Suction Pumps A range of versatile, energy efficient bearing frame pumps, suitable for horizontal or vertical mounting and incorporating the Hidrostal Screw Centrifugal Impeller.

More information

Positive displacement pumps. Version

Positive displacement pumps. Version Version 02-2017 1 Contents KNOLL.It works.... 4 MX progressing cavity pumps.... 6 ML rotary lobe pumps.... 8 MS screw pumps.... 10 KTSV screw pumps....12 Options....14 Checklist....15 2 Rotating displacement

More information

SD/SW/VS50 SD50 SW50 VS50

SD/SW/VS50 SD50 SW50 VS50 Performance RPM: 1550 Discharge: 1-1/2" Solids: 3/4" Wholesale Products Page: 7130-1 Section: Performance SD50 SW50 VS50 The curves reflect maximum performance characteristics without exceeding full load

More information

OF CENTRIFUGAL TYPE ba.

OF CENTRIFUGAL TYPE ba. Pumps Mixers Aeration Controls Services SCANPUMP PROCESS pumps OF CENTRIFUGAL TYPE ba. www.scanpump.com Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged

More information

VOGEL - Submersible Pumps in Stainless Steel Design TVS

VOGEL - Submersible Pumps in Stainless Steel Design TVS VOGEL - Submersible Pumps in Stainless Steel Design TVS 1 Performance Range: Capacity up to 520 m 3 /h (2300 USgpm) Head up to 500 m (1600 feet) Speed 2900/3500 min -1 (2900/3500 rpm) Motor power up to

More information

HYDROMATIC BV-40 SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR

HYDROMATIC BV-40 SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR PERFORMANCE DATA Wholesale Products Page: 7140-1 Dated: August 2002 Supersedes: May 2002 RPM: 1550 Discharge: 2 Solids: 2 8 25 7 20 5 4/10 HP HEAD-METERS 4 HEAD-FEET 15 3 10 2 0 0 20 40 60 80 Capacity-U.S.

More information

Flow Rate Transmitters/ Flow Switches

Flow Rate Transmitters/ Flow Switches Flow Rate ransmitters/ Flow Switches FOw RAE RANSMIERS FOw SwICHES o measure the flow rate in machines and systems HYDAC EECRONIC offers various fl ow rate transmitters and fl ow switches. he fl ow rate

More information

HYDRO SERIES 11K2-15K2 LIMITS TO USE

HYDRO SERIES 11K2-15K2 LIMITS TO USE OPEN IMPELLER 5 Hz HYDRO SERIES 11K2 15K2 USE Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids.

More information

Goulds Two Stage, Horizontally Split Case Pump

Goulds Two Stage, Horizontally Split Case Pump Goulds 3316 Two Stage, Horizontally Split Case Pump 3316 Two Stage, Horizontally Split Case Pumps designed for boiler feed, mine dewatering and other applications requiring moderately high heads with a

More information

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR

More information

jung-process-systems.de Hygienic gentle economical

jung-process-systems.de Hygienic gentle economical Hygienic gentle economical About us More than 40 years experience in fabrication and service for the food and beverage industry Premium in house machining and testing facilities for stainless steel or

More information

Flygt 3171, 50Hz. Technical Specification

Flygt 3171, 50Hz. Technical Specification Flygt 3171, 50Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor...2 Product description...2 Motor rating and performance curves...5 F-pump, Premium Efficiency Motor

More information

50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS

50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS 5 Hz TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS Cod. 19171 Rev. A Ed.11/14 TCLN, TLCHN SERIES INSTALLATION POSITIONS Lowara, Xylect are trademarks of Xylem Inc. or one of its subsidiaries.

More information

A. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems:

A. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems: SECTION 221429 - SUMP PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. 1

Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA.   1 Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. www.absgroup.com 1 Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged design

More information

ABEL EM. Electromechanical Membrane Pumps The economical alternative. From the reciprocating positive displacement pump specialist

ABEL EM. Electromechanical Membrane Pumps The economical alternative. From the reciprocating positive displacement pump specialist ABEL EM From the reciprocating positive displacement pump specialist Electromechanical Membrane Pumps The economical alternative 1 Membrane Pumps Solids Handling Pumps High Pressure Pumps Marine Pumps

More information

PAHT C pumps ATEX PAHT C pump

PAHT C pumps ATEX PAHT C pump MAKING MODERN LIVING POSSIBLE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Data sheet ATEX PAHT C pump hpp.danfoss.com Table of Contents 1. Introduction...2 2.

More information

DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox

DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox 5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction

More information

50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS

50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS 5 Hz TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS Cod. 19171 Rev. B Ed.1/14 TCLN, TLCHN SERIES INSTALLATION POSITIONS Lowara, Xylect are trademarks of Xylem Inc. or one of its subsidiaries.

More information