Chapter 8: External solid plastering

Size: px
Start display at page:

Download "Chapter 8: External solid plastering"

Transcription

1 Candidate name: Candidate number: Date: Chapter 8: External solid plastering Circle the correct answers. 1 Which of the following is required for preparing new blockwork for a plainfloat finish? a Coating blockwork with PVA b Damping down of blockwork c Hacking with a lath hammer d Raking out of joints to blockwork 2 Which of the following is a latex-based adhesive used to form a key for external render? a PVA b ERA c SBR d EML 3 In traditional external cement-based renders in which coat is the waterproofer added? a Dubbing out coat b Floating coat c Top coat d Render coat 4 The scratch/render coat should be applied at: a 6 to 8 mm thick b 9 to 12 mm thick c 12 to 14 mm thick d 13 to 16 mm thick 5 What is the purpose of a bell-cast bead? a To give a decorative finish b Protect angles around the building c Direct rainwater from the face of the building d To hide poor-quality finish Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 1 of 1

2 6 If a strong cement-based external render is applied on top of a weaker mix it will: a Make the render become lose b Improve the wearing properties of the finish c Help to achieve a better quality finish d Improve the waterproofing of the finish 7 The correct mix proportion for a render coat for external rendering is: a 2 to 1 plus waterproofer b 4 to 1 no waterproofer c 2 to 1 no waterproofer d 4 to 1 plus waterproofer 8 The best type of sand for external rendering to improve its weather proofing is: a Medium sharp b A good soft builder s sand c As sharp as can be spread easily d A coarse builder s sand 9 When applying the top coat for an external rendering, the type of suction you may find is: a Medium, low suction b High suction c No suction d Very high suction 10 The finishing coat for external render will require: a Box screeds b Broad screeds c Plumb and dot d No screeds 11 What is the purpose of an expansion bead? a To form panels on the wall b To make a break between different materials c To allow for movement in the background d To form a feature at the bottom of the wall 12 How should external cement work be cured? a Throw buckets of water onto the render straight after completion b Hose down cement finish two weeks after finishing c A light hosing 24 hours after finishing d Gently tip water down render face straight after finishing Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 2 of 2

3 13 What thickness of render should be applied for the finishing coat? a 4 to 6 mm b 7 to 9 mm c 10 to 12 mm d 13 to 15 mm 14 Which of the following is the most common fault found in external render finishes? a Pattern staining b Surface crazing c Colour changes d Efflorescence staining 15 Which of the following methods is used for fixing external rendering beads? a Plaster dabs b Neat cement c Rendering mix d Small headed nails Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 3 of 3

4 Chapter 8: External solid plastering Answers 1 Which of the following is required for preparing new blockwork for a plainfloat finish? a Coating blockwork with PVA b Damping down of blockwork c Hacking with a lath hammer d Raking out of joints to blockwork 2 Which of the following is a latex-based adhesive used to form a key for external render? a PVA b ERA c SBR d EML 3 In traditional external cement-based renders in which coat is the waterproofer added? a Dubbing out coat b Floating coat c Top coat d Render coat 4 The scratch/render coat should be applied at: a 6 to 8 mm thick b 9 to 12 mm thick c 12 to 14 mm thick d 13 to 16 mm thick 5 What is the purpose of a bell-cast bead? a To give a decorative finish b Protect angles around the building c Direct rainwater from the face of the building d To hide poor-quality finish Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 4 of 4

5 6 If a strong cement-based external render is applied on top of a weaker mix it will: a Make the render become lose b Improve the wearing properties of the finish c Help to achieve a better quality finish d Improve the waterproofing of the finish 7 The correct mix proportion for a render coat for external rendering is: a 2 to 1 plus waterproofer b 4 to 1 no waterproofer c 2 to 1 no waterproofer d 4 to 1 plus waterproofer 8 The best type of sand for external rendering to improve its weather proofing is: a Medium sharp b A good soft builder s sand c As sharp as can be spread easily d A coarse builder s sand 9 When applying the top coat for an external rendering, the type of suction you may find is: a Medium, low suction b High suction c No suction d Very high suction 10 The finishing coat for external render will require: a Box screeds b Broad screeds c Plumb and dot d No screeds 11 What is the purpose of an expansion bead? a To form panels on the wall b To make a break between different materials c To allow for movement in the background d To form a feature at the bottom of the wall 12 How should external cement work be cured? a Throw buckets of water onto the render straight after completion b Hose down cement finish two weeks after finishing c A light hosing 24 hours after finishing d Gently tip water down render face straight after finishing Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 5 of 5

6 13 What thickness of render should be applied for the finishing coat? a 4 to 6 mm b 7 to 9 mm c 10 to 12 mm d 13 to 15 mm 14 Which of the following is the most common fault found in external render finishes? a Pattern staining b Surface crazing c Colour changes d Efflorescence staining 15 Which of the following methods is used for fixing external rendering beads? a Plaster dabs b Neat cement c Rendering mix d Small headed nails Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 6 of 6

External solid plastering: overview

External solid plastering: overview External solid plastering: overview Render gives a weatherproof surface that protects the building and provides a decorative finish. Traditional render is applied by hand; modern render can also be applied

More information

PPC Cement TUTORIAL. how to screed a floor

PPC Cement TUTORIAL. how to screed a floor PPC Cement TUTORIAL how to screed a floor Pre-build: TOOLs & Materials ITEM Quantity Check. Builders bucket. Wheelbarrow 3. Shovel 4. Builder s line 5. 50mm steel pegs 6. Rigid timber forms 7. Flexible

More information

Building Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management

Building Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management Building Construction 14 Dr Nabil El-Sawalhi Associate professor Engineering Projects Management Plaster Plaster is a wet mixed material applied to internal walls as a finish to fill in any irregularities

More information

/501 Level 3 Plastering (Solid) Version 1.0 November Sample Marking Scheme

/501 Level 3 Plastering (Solid) Version 1.0 November Sample Marking Scheme 7908-001/501 Level 3 Plastering (Solid) Version 1.0 November 2016 Sample Marking Scheme The correct responses to the multiple questions are in BOLD. 1 What must be checked by a building control officer

More information

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10 CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES 283 Chapter 10 FUNCTIONAL REQUIREMENTS FUNCTIONAL REQUIREMENTS 10.1 PLASTERWORK Workmanship i. All workmanship must be within the tolerances

More information

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES

CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES CONTENTS 10.1 PLASTERWORK 10.2 2 ND AND 3 RD FIX FINISHES FUNCTIONAL REQUIREMENT 10.1 Plasterwork Workmanship Design Technical Manual TS-011-09-010412 i. All workmanship must be within defined tolerances

More information

ARTEX AND PLASTER. 2 - Choosing the right product

ARTEX AND PLASTER. 2 - Choosing the right product ARTEX AND PLASTER Proper plastering is not easy. But DIY plasters are designed with ease of use in mind, and Artex TM is no more difficult to apply than thick paint. It is best to wear gloves when mixing

More information

Plaster systems. Plaster systems.

Plaster systems. Plaster systems. Plaster systems Plaster systems Gyproc plasters have been formulated to suit a wide variety of background types including concrete, brick, blockwork, sand / cement, Gyproc Plasterboards and expanded metal

More information

Method Statement. For RSA Cement Renders Over Masonry Substrates

Method Statement. For RSA Cement Renders Over Masonry Substrates Method Statement RSA Masonry Renders, Traditional Render and EP Render are all suitable for application over correctly prepared clay bricks and concrete blocks PREPARATION Cleaning:- Ensure all surfaces

More information

TECHNICAL INFORMATION LIME SAND MORTARS

TECHNICAL INFORMATION LIME SAND MORTARS TECHNICAL DATA SHEET LIME SAND MORTARS Ver August 2016 TECHNICAL INFORMATION LIME SAND MORTARS Product Data Sheet No. 120/01 INTRODUCTION Tarmac Lime Sand Mortars are factory produced lime:sand mortars

More information

NEWTON 803 NEWTONITE JOHN NEWTON & COMPANY LIMITED (EST. 1848) DATA SHEET. Damp-proofing Membrane & Plaster Base PRODUCT CODE - M16, M21 & M22

NEWTON 803 NEWTONITE JOHN NEWTON & COMPANY LIMITED (EST. 1848) DATA SHEET. Damp-proofing Membrane & Plaster Base PRODUCT CODE - M16, M21 & M22 Cl/SfB (21.9) Ln6 (L34) NEWTON 803 NEWTONITE Rev 5.0-25 January 2011 INTRODUCTION Newton 803 Newtonite is a composite damp-proofing membrane comprising of high density polypropylene membrane with a rot-proof

More information

NEWTON 805 NEWLATH Damp-proofing Membrane & Plaster Base

NEWTON 805 NEWLATH Damp-proofing Membrane & Plaster Base Cl/SfB (21.9) Ln6 (L34) NEWTON 805 NEWLATH Rev 4.2-29 November 2012 INTRODUCTION Newton 805 Newlath is a composite damp-proofing membrane comprising of high density polypropylene membrane with a rot-proof

More information

SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete

SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete Page 1 of 6 Document: 70.5 Collection: 116: Substrate Specification Sheets (SSS) Modified: 3/01/017 14:56 Created: 7/05/016 17:0 Armourcoat

More information

Level 1 Certificate in Basic Construction Skills - Plastering ( )

Level 1 Certificate in Basic Construction Skills - Plastering ( ) Level 1 Certificate in Basic Construction Skills - Plastering (6217-04) Qualification handbook www.cityandguilds.com June 2005 Version 1.1 (February 2014) About City & Guilds City & Guilds is the UK s

More information

Module 11: Plastered walls

Module 11: Plastered walls Module 11: Plastered walls Module Objectives By the end of this session, participants will understand: 1. The requirements for good plastering. 2. Additives used in plaster. 3. How to key the substrate

More information

Installation Instructions Tuscan Field Applied Limestone Finish

Installation Instructions Tuscan Field Applied Limestone Finish Installation Instructions Tuscan Field Applied Limestone Finish TS-107 Recommended Tools for Installation of Tuscan StoneWorx Finishes Variable Speed Drill capable of producing 1000 RPM s MX1 Mixing Paddle

More information

18mm T&G Engineered Oak Fitting Guide & Warranty Information

18mm T&G Engineered Oak Fitting Guide & Warranty Information Fitting Guide & Warranty Information Fitting Guide Pre Installation Acclimatising your new timba floor Your timba 18mm engineered flooring does not require a period of acclimatisation however warranty

More information

Hemp Mortars St Astier Limes and Mortars telephone:

Hemp Mortars St Astier Limes and Mortars telephone: Hemp Mortars St Astier Limes and Mortars telephone: 0800 783 9014 HEMP MORTARS using St. Astier Natural Limes Hemp is a natural material suitable for making light weight insulating mortars. Its density

More information

Level 1 Certificate in Basic Construction Skills. Qualification Specification

Level 1 Certificate in Basic Construction Skills. Qualification Specification Qualification Specification ProQual 2011 Contents Page Introduction 3 Qualification profile 4 Qualification structure 5 Centre requirements 7 Support for candidates 7 Assessment 8 Internal quality assurance

More information

SILASEC DESCRIPTION FEATURES AND BENEFITS SURFACE PREPARATION

SILASEC DESCRIPTION FEATURES AND BENEFITS SURFACE PREPARATION SILASEC WP0001 REVISED: JANUARY 2002 DESCRIPTION Bondall Silasec is a concentrated liquid waterproofing compound designed to be used with Portland type A or type GP cements to form a permanent waterproof

More information

NoMorePly The first tile backing system with a lifetime guarantee

NoMorePly The first tile backing system with a lifetime guarantee Installation Guide NoMorePly.net The first tile backing system with a lifetime guarantee QUICK & EASY THIN PROFILE STRONGER BUILD WATER RESISTANT LIFETIME GUARANTEE KG KG It s quick and easy, and we re

More information

SECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints.

SECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints. SECTION 09200 PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The extent of lath and plaster work is shown on the drawings and in schedules and includes interior and exterior plaster work, and fibreglass

More information

St. Astier NHL Plasters

St. Astier NHL Plasters St. Astier NHL Plasters General Information, Sand For Plasters, Background Preparation, Two Coat Work, Three Coat Work, Protection, Good Working Practice, Plaster Diagnostics, Some Recommended Mixes General

More information

CONSTRUCTION SMARTSCREEN

CONSTRUCTION SMARTSCREEN 6704 Level 1 Construction Trade Occupations - 325 + VAT (SS6704-LV1 ) Unit 102 - Construction Trade Occupations - Painting and Decorating Unit 103 - Construction Trade Occupations - Plastering Unit 104

More information

BRICKWORK 3.5 BRICKWORK 1 GENERAL

BRICKWORK 3.5 BRICKWORK 1 GENERAL BRICKWORK 1 GENERAL 1.1 INSPECTION Notice Give sufficient notice so that inspection may be made of the following: - Set out of brickwork to lintels, arches and other architectural features. - Damp-proof

More information

Product Data Sheet KF.46 Iss AQUATECH

Product Data Sheet KF.46 Iss AQUATECH DESCRIPTION AQUATECH Kingfisher Aquatech is a premium cement based tanking powder with active hydrophobic ingredients that react with water and free lime to form pore blocking crystals. Mixed with water

More information

TECHNICAL DATA SHEET AUS-BOND INDUSTRIAL LATEX ADMIX

TECHNICAL DATA SHEET AUS-BOND INDUSTRIAL LATEX ADMIX Description: Aus-Bond Industrial Latex Admix is a specially formulated latex admix for use in sand/cement based mortars for extreme conditions such as swimming pools, facades, rapid transit stations and

More information

LASER Progression (QCF) UNIT CONTENT Construction and Trades

LASER Progression (QCF) UNIT CONTENT Construction and Trades LASER Progression (QCF) UNIT CONTENT Construction and Trades This document is to be used in conjunction with the Qualification Specification and Unit Lists for this suite of qualifications, provided by

More information

Method Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels

Method Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels Method Statement For RSA Coating Systems Over AAC Lightweight Blocks RSA strongly recommend the use of our full render, texture and protective coating systems over AAC lightweight blocks. We DO NOT recommend

More information

Method Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels

Method Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels Method Statement For RSA Coating Systems Over AAC Lightweight Blocks RSA strongly recommend the use of our full render, texture and protective coating systems over AAC lightweight blocks. We DO NOT recommend

More information

Level 1 Certificate in Basic Construction Skills

Level 1 Certificate in Basic Construction Skills Qualification Specification ProQual 2011 ProQual, May 2016 1 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 5 Credit transfer

More information

Multipurpose latex additive for mortar and cementitious adhesive

Multipurpose latex additive for mortar and cementitious adhesive SGBPDC-12-081 Multipurpose latex additive for mortar and cementitious adhesive USES For the preparation of high performance mortar, screeds and renders. Typical application Screeds and levelling compounds

More information

IRISH BOARD. WEBER MONOCOUCHE RENDERING SYSTEM Enduit de surface Oberflachenbeschichtung. CERTIFICATE No. 03/0180 BUILDING PRODUCT CERTIFICATION

IRISH BOARD. WEBER MONOCOUCHE RENDERING SYSTEM Enduit de surface Oberflachenbeschichtung. CERTIFICATE No. 03/0180 BUILDING PRODUCT CERTIFICATION IRISH AGRÉMENT BOARD BUILDING PRODUCT CERTIFICATION CERTIFICATE No. 03/0180 Cl/SfB (41) Pq4 weber sbd, Dickens House, Enterprise Road Flitwick, Bedford MK45 5BY, UK. Tel: 08703 330070 Fax: 01525 718988

More information

ECO OUTDOOR INSTALLATION TIPS WALLING FREE FORM MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU

ECO OUTDOOR INSTALLATION TIPS WALLING FREE FORM MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU ECO OUTDOOR INSTALLATION TIPS WALLING FREE FORM MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations tips Please note these tips are guides only and should be used

More information

aquapanel InstallatIon GuIde

aquapanel InstallatIon GuIde Installation Guide AQUAPANEL BEFORE YOU START It s a good idea to stand the AQUAPANEL sheets in the area for 2 days prior to cutting and installing, to allow the sheets to breathe and reach moisture equilibrium.

More information

Level 2 Technical Certificate in Plastering

Level 2 Technical Certificate in Plastering Level 2 Technical Certificate in Plastering 7908-20 March 2016 Version 1.0 Qualification Handbook Contents Contents 2 1 Introduction 3 2 Assessment 6 3 Units 7 Unit 201 Principles of construction 8 Unit

More information

ECO OUTDOOR INSTALLATION TIPS WALLING RANDOM ASHLAR MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU

ECO OUTDOOR INSTALLATION TIPS WALLING RANDOM ASHLAR MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU ECO OUTDOOR INSTALLATION TIPS WALLING RANDOM ASHLAR MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installation Tips Please note these tips are guides only and should be used

More information

Plastering. Holiday Inn - Sultanate of Oman

Plastering.  Holiday Inn - Sultanate of Oman 1 208 Holiday Inn - Sultanate of Oman Gyproc GypFine Plasters provide the ultimate skimming solutions for today s high-end finish. They are formulated to suit a wide variety of backgrounds including plasterboard,

More information

ECO OUTDOOR INSTALLATION TIPS WALLING DRY STONE MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU

ECO OUTDOOR INSTALLATION TIPS WALLING DRY STONE MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU ECO OUTDOOR INSTALLATION TIPS WALLING DRY STONE MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should be used

More information

INFORM PLAIN LIME PLASTERING

INFORM PLAIN LIME PLASTERING INFORM PLAIN LIME PLASTERING Fig. 1 Slaking quicklime to produce lime putty. PLAIN LIME PLASTER Plaster has a long history of use as a finishing material for internal walls and celings in Scotland. The

More information

TWISTFIX CHEMICAL DAMP-PROOFING SYSTEMS DAMP CURE

TWISTFIX CHEMICAL DAMP-PROOFING SYSTEMS DAMP CURE Twistfix Limited Peter House Oxford Street Manchester M1 5AN Tel: 0845 123 6007 Fax: 0845 308 7007 e-mail: sales@twistfix.co.uk website: www.twistfix.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL

More information

STONE PRODUCT SPECIFICATION SANDSTONE. Some typical installation methods are: Pedestrian traffic only: reinforced concrete* 75mm thick

STONE PRODUCT SPECIFICATION SANDSTONE. Some typical installation methods are: Pedestrian traffic only: reinforced concrete* 75mm thick Please note these tips are guides only and should be used in addition to the relevant Australian Standards for trade practices. Note that installation may vary from site to site with varying conditions

More information

ECO OUTDOOR INSTALLATION TIPS WALLING TRADITIONAL FORMAT MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.

ECO OUTDOOR INSTALLATION TIPS WALLING TRADITIONAL FORMAT MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM. ECO OUTDOOR INSTALLATION TIPS WALLING TRADITIONAL FORMAT MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should

More information

Method Statement. For RSA Coating Systems Over M Grade Expanded Polystyrene (EPS)

Method Statement. For RSA Coating Systems Over M Grade Expanded Polystyrene (EPS) Method Statement For RSA Coating Systems Over M Grade Expanded Polystyrene RSA strongly recommend the use of our full render, texture paint systems over polystyrene substrates. We DO NOT recommend mixing

More information

General Glass Mosaic Tile Fixing Specification for Immersed Installations.

General Glass Mosaic Tile Fixing Specification for Immersed Installations. General Glass Mosaic Tile Fixing Specification for Immersed Installations. This specification covers the installation of dot mounted glass mosaic inside of, and around concrete Swimming Pools. Refer to

More information

TECHNICAL INFORMATION SCREED

TECHNICAL INFORMATION SCREED TECHNICAL DATA SHEET SCREED Ver Nov 2015 TECHNICAL INFORMATION SCREED Product Data Sheet No. 110/01 INTRODUCTION Tarmac ready-to-use cement sand levelling screed is a correctly proportioned factory produced

More information

CHAPTER 1: Tolerances

CHAPTER 1: Tolerances CONTENTS 1.1 MASONRY 1.2 INTERNAL WALLS AND CEILINGS 1.3 JUNCTIONS 1.4 FLOORS 1.5 DOORS AND WINDOWS 1.6 SKIRTINGS 1.7 FINISHES AND FITTED FURNITURE 1.8 EXTERNAL WORKS FUNCTIONAL REQUIREMENT 1.0 INTRODUCTION

More information

3910 E. McKinney Denton, TX P.O. Box Dallas, TX EZ WALL CONCENTRATE, INC

3910 E. McKinney Denton, TX P.O. Box Dallas, TX EZ WALL CONCENTRATE, INC EZ Spread Coarse Sand Description EZ Spread is the perfect material for small projects and repairs. This factory prepared blend of portland cement proprietary additives, and sand. EZ Spread is designed

More information

Plaster systems. High quality lining solutions providing the perfect finish for your walls

Plaster systems. High quality lining solutions providing the perfect finish for your walls C07 Linings High quality lining solutions providing the perfect finish for your walls All our systems are covered by SpecSure when using genuine Gyproc and Isover products Gyproc plasters offer a full

More information

Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty.

Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. This specification covers the installation of Ezarri JointPoint Glass Mosaic tiles inside a concrete

More information

SECTION PORTLAND CEMENT PLASTERING

SECTION PORTLAND CEMENT PLASTERING SECTION 09 2400 PORTLAND CEMENT PLASTERING This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be

More information

HOW TO: BOARD ROOMS WITH HIGH HUMIDITY AND CONDENSATION GTEC MOISTURE AND VAPOUR BOARD WITH PLASTERBOARD

HOW TO: BOARD ROOMS WITH HIGH HUMIDITY AND CONDENSATION GTEC MOISTURE AND VAPOUR BOARD WITH PLASTERBOARD HOW TO: BOARD ROOMS WITH HIGH HUMIDITY AND CONDENSATION WITH PLASTERBOARD GTEC MOISTURE AND VAPOUR BOARD 3 MOISTURE AND HUMIDITY Kitchens, utility rooms and cloak rooms are areas of high humidity, modern

More information

4. Floor Substrate Testing Prior to Floor Paint application

4. Floor Substrate Testing Prior to Floor Paint application 4. Floor Substrate Testing Prior to Floor Paint application At Buy Floor Paint we have tried to summarise some simple and practical tests that you can do with commonly available materials and equipment,

More information

ECO OUTDOOR INSTALLATION TIPS WALLING STONE WALL PANELS

ECO OUTDOOR INSTALLATION TIPS WALLING STONE WALL PANELS ECO OUTDOOR INSTALLATION TIPS WALLING STONE WALL PANELS FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the

More information

TECHNICAL DATA SHEET AUS-FLEX GOOD as GOLD LIGHT

TECHNICAL DATA SHEET AUS-FLEX GOOD as GOLD LIGHT POLYMER AND RUBBER FORTIFIED FLEXIBLE, LIGHTWEIGHT MULTI-PURPOSE ADHESIVE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY TILE RENDER, BRICK AND BLOCK WORK MOSAIC TILE AND

More information

TECHNICAL DATA SHEET AUS-FLEX MULTI

TECHNICAL DATA SHEET AUS-FLEX MULTI FLEXIBLE TILE & STONE ADHESIVE POLYMER & RUBBER REINFORCED INTERNAL & EXTERNAL USE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY TILE RENDER, BRICK & BLOCK WORK MOSAIC

More information

TECHNICAL DATA SHEET AUS-FLEX MULTI-LIGHT 9.5

TECHNICAL DATA SHEET AUS-FLEX MULTI-LIGHT 9.5 FLEXIBLE, LIGHTWEIGHT TILE AND STONE ADHESIVE POLYMER AND RUBBER REINFORCED FOR WALLS AND FLOORS INTERNAL AND EXTERNAL USE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY

More information

Installation of Ceramic Tile in Swimming Pools

Installation of Ceramic Tile in Swimming Pools Installation of Ceramic Tile in Swimming Pools TDS 192 DESIGN CONSIDERATIONS I. Primary types of swimming pool structures A. Cast-in-place reinforced concrete 1. Definition concrete placed or pumped on-site

More information

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY

DATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY (Page 1 of 8 ) GENERAL DESCRIPTION - Dekster 131 self levelling is a contemporary coating that achieves hard wearing, utilitarian floor surfaces in a range of natural tones to offset any style of interior.

More information

CHAPTER 1: Tolerances

CHAPTER 1: Tolerances CONTENTS 1.1 MASONRY 1.2 INTERNAL WALLS AND CEILINGS 1.3 JUNCTIONS 1.4 FLOORS 1.5 DOORS AND WINDOWS 1.6 SKIRTINGS 1.7 FINISHES AND FITTED FURNITURE 1.8 EXTERNAL WORKS 5 Chapter 1 FUNCTIONAL REQUIREMENTS

More information

Cavity Drain Systems.

Cavity Drain Systems. Grommet & Nail Platon Sealing Rope Sheet Piling Platon P8 Platon P8 Platon Cornerstrip Platon P20 Membrane Reinforced Concrete incorporating: Triton TT Super Admix @ 1.2Kg/100Kg OPC Sheet Piling PLATON

More information

HOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS

HOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS HOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS 1 FOCUS ON GETTING IT RIGHT As with any building project the quality of finish is determined by the foundation upon which it is installed. The most important

More information

CONTRACTORS SHOULD INCLUDE A COPY OF THIS SPECIFICATION WITH THEIR QUOTATION TO THE CLIENT.

CONTRACTORS SHOULD INCLUDE A COPY OF THIS SPECIFICATION WITH THEIR QUOTATION TO THE CLIENT. Park Road, Barrow-in-Furness, Cumbria. LA14 4EQ. e-mail labs@sovchem.co.uk Fax: 01229 840870 Technical Advice Line: 0845 603 0722 CONTRACTORS SHOULD INCLUDE A COPY OF THIS SPECIFICATION WITH THEIR QUOTATION

More information

TECHNICAL DATA SHEET AUS-CRETE PREMIUM INDUSTRIAL

TECHNICAL DATA SHEET AUS-CRETE PREMIUM INDUSTRIAL SUITABLE FOR HEAVY TRAFFIC, SWIMMING POOLS, TILE AND STONE FACADES INDUSTRIAL GRADE ADHESIVE EXTRA HEAVY DUTY SHOCK AND VIBRATION RESISTANT SUITABLE FOR: EXTRA LARGE TILE AND STONE ALL MASONRY SUBSTRATES

More information

COSVR67 - SQA Unit Code DY92 04 Produce external solid render finishes

COSVR67 - SQA Unit Code DY92 04 Produce external solid render finishes Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials and equipment 4 preparing materials and applying render to external backgrounds

More information

INSTALLATION METHOD STATEMENT

INSTALLATION METHOD STATEMENT INSTALLATION METHOD STATEMENT 1.0 Introduction - Liquid screed is a flowing screed flooring system comprising a calcium sulphate binder, fine aggregate and water. - It is for internal use only, in general

More information

E Floors Sm , ,850, F Landings Sm 18 1, , G 20 x 100 mm Tile Skirting : cut to size Lm ,500.

E Floors Sm , ,850, F Landings Sm 18 1, , G 20 x 100 mm Tile Skirting : cut to size Lm ,500. ELEMENT No. 5 FLOOR All samples to be provided by Contractor and submitted to Architect for approval before incorporation in the finished works. Cement and sand (1:4): to hacked floors: A B C D 32 mm thick

More information

Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty.

Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. This specification covers the installation of Ezarri JointPoint Glass Mosaic tiles inside of, and around

More information

TECHNICAL DATA SHEET AUS-MAXIGRIP TEN YEAR WARRANTY AUSTRALIAN STANDARS COMPLIANCE C2 T S1 LOW VOC GREEN FOOTPRINT

TECHNICAL DATA SHEET AUS-MAXIGRIP TEN YEAR WARRANTY AUSTRALIAN STANDARS COMPLIANCE C2 T S1 LOW VOC GREEN FOOTPRINT Description: Aus-MaxiGrip: Provides a high performance flexible polymer fortified adhesive with excellent slip resentence that is used for installing a wide range of tile and stone, made from lightweight

More information

EPIC F312. Uniclass. CI/SfB April Yq4. Natural Hydraulic Lime Mortar

EPIC F312. Uniclass. CI/SfB April Yq4. Natural Hydraulic Lime Mortar Uniclass CI/SfB April 2017 EPIC F312 Yq4 Natural Hydraulic Lime Mortar K Lime: a range of dry bagged mortars made from Natural Hydraulic Lime, selected sand and other performance enhancing additives, derived

More information

For RSA Coating Systems over For RSA Coating Systems over Austech Foamula Extruded Polystyrene (XPS) (Skin Off)

For RSA Coating Systems over For RSA Coating Systems over Austech Foamula Extruded Polystyrene (XPS) (Skin Off) Austech Foamula Extruded Polystyrene (XPS) (Skin Off) RSA strongly recommend the use of our full render and texture systems with the appropriate water tight membrane over polystyrene products. SEVEN STEPS

More information

Appendix 6: Mapping of 21844VIC to 22216VIC

Appendix 6: Mapping of 21844VIC to 22216VIC Appendix 6: Mapping of to 22216VIC Mapping table from Certificate II in Building and Construction (Bricklaying, Carpentry, Solid Plastering) to Construction (Bricklaying, Carpentry, Ceiling Lining, Wall

More information

TECHNICAL DATA SHEET NO:503 VERSION: 2/1 ST MARCH 1999

TECHNICAL DATA SHEET NO:503 VERSION: 2/1 ST MARCH 1999 PAGE: 1 of 17. EVERBUILD SBR BOND DESCRIPTION EVERBUILD SBR BOND is a white liquid, which has numerous uses as an admixture, primer, bonding agent and sealer. Polymer Emulsions of this type have been used

More information

MANUFACTURER S SPECIFICATIONS Section LIMESTONE PLASTER

MANUFACTURER S SPECIFICATIONS Section LIMESTONE PLASTER MANUFACTURER S SPECIFICATIONS Section 09220 LIMESTONE PLASTER LE DÉCOR LIMESTONE PART 1 GENERAL 1.1 General A. This section describes the requirements for furnishing and installing Limestone Plaster. 1.2

More information

GYPSUM BOARD AND PLASTER

GYPSUM BOARD AND PLASTER CHAPTER 25 SECTION 2501 GENERAL 2501.1 Scope. 2501.1.1 General. Provisions of this chapter shall govern the materials, design, construction and quality of gypsum board, lath, gypsum plaster and cement

More information

Module 3 Slabbing, Skimming, Dry Lining and Floors UNIT: 1 Slabbing Studded Walls

Module 3 Slabbing, Skimming, Dry Lining and Floors UNIT: 1 Slabbing Studded Walls TRADE OF PLASTERING PHASE 2 Module 3 Slabbing, Skimming, Dry Lining and Floors UNIT: 1 Produced by In cooperation with subject matter expert: Terry Egan Some images & text courtesy of Gypsum Industries

More information

VITCAS FIREPLACE RENDER & HEAT RESISTANT PLASTER

VITCAS FIREPLACE RENDER & HEAT RESISTANT PLASTER FIEPLACE ENDE & HEAT ESISTANT PLASTE WALL Heat esistant Filler max. 6mm Heat esistant Plaster min. 10mm AEA OF HIGH HEAT Fireplace ender PVA Adhesive Sealer 900mm 400mm 400mm 400mm ISO 9001 APPOVED 8 Bonville

More information

Foirgniochta. Marking Scheme Leaving Certificate Examination, Ordinary Level. Construction Studies

Foirgniochta. Marking Scheme Leaving Certificate Examination, Ordinary Level. Construction Studies 2000 Foirgniochta Marking Scheme Leaving Certificate Examination, 2000 Construction Studies Ordinary Level of site.. Adjoining. Distinct Landmarks.. site in Red.. 1: (ii) Site Boundary site. Site. Drainage

More information

Resin Bound Installation Guide

Resin Bound Installation Guide Resin Bound Installation Guide Key Contact Details Customer Service / Sales: 01484 400855 Email: info@theresinmill.co.uk The Resin Mill ltd, St Pegs Mill, Thornhill Beck Lane, Brighouse HD6 4AH Introduction

More information

M40 STONE / CONCRETE / CERAMIC TILING / MOSAIC To be read with preliminaries/general conditions

M40 STONE / CONCRETE / CERAMIC TILING / MOSAIC To be read with preliminaries/general conditions M40 GUIDE RECOMMENDATION M40 STONE / CONCRETE / CERAMIC TILING / MOSAIC To be read with preliminaries/general conditions Document prepared for: Recommendations for: Armatile Station Road Industrial Estate

More information

RhinoPlast. RhinoWall. RhinoCeil. GypWall. DonnCeil. Saint-Gobain Construction Product Service Centres. Saint-Gobain Gyproc (Pty) Ltd

RhinoPlast. RhinoWall. RhinoCeil. GypWall. DonnCeil. Saint-Gobain Construction Product Service Centres. Saint-Gobain Gyproc (Pty) Ltd Saint-Gobain Gyproc (Pty) Ltd SHARED SERVICE CENTRE 77 Ostend Road, Germiston Tel: (011) 345 5300 Fax: (011) 345 5301 BRAKPAN FACTORY Tel: (011) 365 9600 Fax: (011) 736 6500 GERMISTON FACTORY Tel: (011)

More information

SSS001: Substrate Specification Sheet 1 - Plasterboard Drylining Installation and Finishing

SSS001: Substrate Specification Sheet 1 - Plasterboard Drylining Installation and Finishing SSS001: Substrate Specification Sheet 1 - Plasterboard Drylining Installation and Finishing Page 1 of 20 Document: 9678.53 Collection: 116: Substrate Specification Sheets (SSS) Modified: 28/10/2016 09:50

More information

CDK Neolith Reduced Thickness Porcelain Panel Installation Specification.

CDK Neolith Reduced Thickness Porcelain Panel Installation Specification. CDK Neolith Reduced Thickness Porcelain Panel Installation Specification. This specification covers the installation of Neolith Reduced Thickness Porcelain Panel to concrete or other suitable masonry substrates.

More information

roofing ROOFING Design of the base ROOFING DETAILS

roofing ROOFING Design of the base ROOFING DETAILS DETAILS The general arrangement details and the principles to be followed at skirtings, upstands, abutments, verges, gutters and expansion joints are as details illustrated. SELECTION PARAMETERS It is

More information

ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES

ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant

More information

Hardscaping Installation Manual

Hardscaping Installation Manual Hardscaping Installation Manual INDEX Installation of Pavers... 1 Installation of Meshed Flagstone... 2 Installation of Veneer Stone... 3 Sand Set Installation of Pavers 1. Preparing the ground Mark your

More information

7Do not walk on concrete for 24 hours. 8

7Do not walk on concrete for 24 hours. 8 4 On an uneven or clay base, place a 50mm layer of sand or road base to form an even bedding for concrete. This will also reduce the likelihood of cracking as the concrete has a firm base on which to rest.

More information

EUROMIX DRY MORTAR SYSTEMS EUROMIX ONE COAT RENDER

EUROMIX DRY MORTAR SYSTEMS EUROMIX ONE COAT RENDER CPI Mortars Limited Willow House Strathclyde Business Park Bellshill Lanarkshire ML4 3PB Tel: 01698 464110 Fax: 01698 464111 e-mail: info@euromix.com website: www.euromix.com APPROVAL INSPECTION TESTING

More information

WYKAMOL CHEMICAL DAMP-PROOFING SYSTEMS ULTRACURE

WYKAMOL CHEMICAL DAMP-PROOFING SYSTEMS ULTRACURE Wykamol Group Unit 3, Boran Court Network 65 Business Park Hapton, Burnley Lancashire BB11 5TH Tel: 0845 400 6666 Fax: 0845 400 3333 e-mail: sales@wykamol.com website: www.wykamol.com APPROVAL INSPECTION

More information

ECO OUTDOOR INSTALLATION TIPS FLOORING SPLIT STONE

ECO OUTDOOR INSTALLATION TIPS FLOORING SPLIT STONE ECO OUTDOOR INSTALLATION TIPS FLOORING SPLIT STONE FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant

More information

Vitripiazza Installation Guide

Vitripiazza Installation Guide Vitripiazza Installation Guide Italian vitrified porcelain paving A. Planning and Sub base Once you ve decided where your patio is going, draw a detailed plan to scale on graph paper. Put in all the dimensions

More information

PRACTICAL TASK MANUAL

PRACTICAL TASK MANUAL 6808-33 Level 3 Diploma in Plastering December 2017 Version 1.2 PRACTICAL TASK MANUAL Contents Task manual amendments 2 Candidate details 3 Unit assessment overview 4 Practical task completion record 4

More information

ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY

ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant

More information

COSVR67 SQA Unit Code HL75 04 Apply solid render to background surfaces and produce finishes

COSVR67 SQA Unit Code HL75 04 Apply solid render to background surfaces and produce finishes Apply solid render to background surfaces and produce finishes Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting

More information

Section 10. Rendering, Plasterboard & Fibre Cement Sheeting

Section 10. Rendering, Plasterboard & Fibre Cement Sheeting MARKETING PROPERTY-PROJECT SERVICES STD - D905 VOLUME 2 Service Station Construction SPECIFICATION Section 10 Rendering, Plasterboard & Fibre Cement Sheeting Index 10.1 Extent of Work 10.2 Rev 07.8 General

More information

TECHNICAL DATA SHEET AUS-CRETE MPA

TECHNICAL DATA SHEET AUS-CRETE MPA MULTI-PURPOSE ADHESIVE WALLS AND FLOORS DOMESTIC AND COMMERCIAL TILE AND STONE SUITABLE FOR: LARGE TILE AND STONE ALL MASONRY SURFACES MARBLE AND GRANITE RENDER, BRICK AND BLOCK WORK PORCELAIN CEMENT SHEET

More information

RIW LIQUID ASPHALTIC COMPOSITION Membrane étanche à l humidité Feuchtigkeitssperre. Regulations. Requirement: C2(a) Resistance to moisture Comment:

RIW LIQUID ASPHALTIC COMPOSITION Membrane étanche à l humidité Feuchtigkeitssperre. Regulations. Requirement: C2(a) Resistance to moisture Comment: RIW Ltd Arc House Terrace Road South Binfield Bracknell Berkshire RG42 4PZ Tel: 01344 397777 Fax: 01344 862010 e-mail: technical@riw.co.uk website: www.riw.co.uk CI/SfB a Vs1 Agrément Certificate No 89/2278

More information

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO

More information

ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU

ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should be used

More information

MANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE

MANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE MANUFACTURER'S SPECIFICATIONS Section 09225 ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE ST. ASTIER NATURAL HYDRAULIC LIME PLASTER PART 1 GENERAL 1.1 Summary A. This Section includes St. Astier Natural

More information