ELEVATION FOR DETAIL REFERENCE ONLY
|
|
- Baldwin Hudson
- 6 years ago
- Views:
Transcription
1 OUTSIDE CORNER OPENING 14 SOFFIT 18 END WALL 17 INSIDE CORNER ELEVATION FOR DETAIL REFERENCE ONLY CCV-01 CCV-02 CCV-03 CCV-04 CCV-05 CCV-06 CCV-07 CCV-08 CCV-09 CCV-10 CCV-11 CCV-12 CCV-13 CCV-14 CCV-15 CCV-16 CCV-17 INDEX STANDARD PANEL OFFERING STANDARD PANEL OFFERING SIDE LAP DETAILS SIDE LAP DETAILS WALL SECTIONS WALL SECTIONS WALL SECTIONS BASE DETAILS PARAPET DETAIL STACK JOINT DETAIL HEAD OPENING DETAIL JAMB OPENING DETAIL SILL OPENING DETAIL HEAD, JAMB, SILL INTERSECTION FIX POINT DETAIL END WALL DETAIL CCV-18 SOFFIT DETAILS CCV-19 OUTSIDE CORNER DETAIL CCV-20 INSIDE CORNER DETAIL CCV-21 PENETRATION (1 of 2) CCV-22 PENETRATION (2 of 2) INDEX NOTE: DETAILS ARE FOR PROMOTIONAL USE ONLY. FOR COMPLETE DETAILS, REFER TO CENTRIA'S WEB SITE AT CCV-01
2 16" [406] 16" [406] 5.25" [133] CC " [133] 5.25" [133] CC " [406] 16" [406] 5.25" [133] CC-663 CC " [133] 12" [305] 12" [305] (TYP.) 4.00" [102] CC " [32] 5.25" [133] CC " [305] CC " [133] CASCADE Panel Options Horizontal With Attachment Clips Vertical With Attachment Clips and a Fixing Point Fastener CASCADE LOW CELL PANELS CCV-02
3 16" [406] 16" [406] 8.25" [210] CC [32] 2.75 [70] CC [108] 16" [406] 16" [406] 4.25" [108] CC " [108] CC " [108] 16" [406] 16" [406] 4.25" [108] 4.00" [102] CC " [210] CC " [305] 12" [305] 8.25" [210] CC-200 CC " [108] 12" [305] 4.25" [108] CC-220 CASCADE Panel Options Horizontal With Attachment Clips Vertical With Attachment Clips and a Fixing Point Fastener CASCADE HIGH CELL PANELS CCV-03
4 CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [305] NOMINAL COVERAGE CC " [305] NOMINAL COVERAGE SIDE LAPS CC " [305] NOMINAL COVERAGE CASCADE LOW CELL PANELS CCV-04
5 CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [406] NOMINAL COVERAGE CC " [305] NOMINAL COVERAGE CC " [305] NOMINAL COVERAGE SIDE LAPS CC " [305] NOMINAL COVERAGE CASCADE HIGH CELL PANELS CCV-05
6 DRAINED & VENTED CAVITY CASCADE PANEL CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) INTERIOR SHEATHING STUD INSULATION EXTERIOR SHEATHING BARRIER HORIZONTAL 3/4" [19] DEEP 16 GA. SUBGIRT PANELS ON PROTECTED EXTERIOR SHEATHING WITH CAVITY INSULATION VAPOR RETARDER LOCATION THE LOCATION OF THE VAPOR (DIFFUSION) RETARDER IS NOT IDENTIFIED IN THIS DETAIL BECAUSE IT IS A REQUIREMENT THAT VARIES BY CODE JURISDICTION, CLIMATE AND INTERIOR CONDITIONS. THEREFORE THE BUILDING DESIGNER MUST MAKE THIS DETERMINATION. = NOT BY CENTRIA DRAINED & VENTED CAVITY CASCADE PANEL HORIZONTAL 1/2" [13] DEEP 16 GA. SUBGIRT CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) HORIZONTAL GIRTS BARRIER (PROVIDED BY FACE PANEL) VERTICAL LINER PANEL WITH FACTORY APPLIED SEALANT AIR BARRIER (LINER PANEL) FIELD-APPLIED (1.65 PCF) INSULATION IN LINER CAVITY PANELS WITH INSULATION IN VERTICAL LINER = NOT BY CENTRIA CCV-06
7 CASCADE PANEL METALWRAP INSULATED BACK-UP PANEL CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) "A" "A" METALWRAP CONT. ZEE AT EACH PANEL SIDE JOINT (36" O.C.) METALWRAP INSULATED BACK-UP PANEL SECTION A-A PANEL CLIP CASCADE PANEL 3 4 " DRAINED & VENTED CAVITY PANELS WITH METALWRAP INSULATED BACK-UP PANEL = NOT BY CENTRIA DRAINED & VENTED CAVITY CASCADE PANEL CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) CON'T. HORIZONTAL ZEE 16 [1.52] GA. MIN. (SPACING TO BE DETERMINED BY CLADDING ENGINEER) INTERIOR SHEATHING STUD EXTERIOR SHEATHING BARRIER INSULATION SUITABLE FOR MOISTURE EXPOSURE PANELS WITH INSULATION OUTBOARD OF STUD CAVITY VAPOR RETARDER LOCATION THE LOCATION OF THE VAPOR (DIFFUSION) RETARDER IS NOT IDENTIFIED IN THIS DETAIL BECAUSE IT IS A REQUIREMENT THAT VARIES BY CODE JURISDICTION, CLIMATE AND INTERIOR CONDITIONS. THEREFORE THE BUILDING DESIGNER MUST MAKE THIS DETERMINATION. = NOT BY CENTRIA CCV-07
8 MASONRY FASTENER (*) CONTINUOUS HORIZONTAL ZEE SHAPED SUBGIRT (SHIM AS REQUIRED) (*) SUBGIRTS SHALL BE 1.) 16 GA. MINIMUM. 2.) 3/4" [19] MINIMUM DEPTH. 3.) SPACED AT 24" [610] OR 48"O.C. [1219] BASED ON DESIGN LOADS AND INSULATION SIZE. CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) MASONRY INSULATION SUITABLE FOR MOISTURE EXPOSURE AIR BARRIER & WATER RESISTANT COATING OR MEMBRANE CASCADE PANEL DRAINED & VENTED CAVITY PANELS WITH INSULATION OVER MASONRY WALL VAPOR RETARDER LOCATION THE LOCATION OF THE VAPOR (DIFFUSION) RETARDER IS NOT IDENTIFIED IN THIS DETAIL BECAUSE IT IS A REQUIREMENT THAT VARIES BY CODE JURISDICTION, CLIMATE AND INTERIOR CONDITIONS. THEREFORE THE BUILDING DESIGNER MUST MAKE THIS DETERMINATION. = NOT BY CENTRIA CASCADE PANEL CSC-3 PANEL CLIP (TOPS OF ALL PANELS SHALL BE THRU FASTENED TO PROVIDE A FIXING POINT FOR THE WALL PANELS.) HORIZONTAL GIRTS FINISH IS REQUIRED ON BOTH SIDES OF THE PANEL SINCE BOTH SIDES ARE EXPOSED TO THE WEATHER PANELS USED AS A SCREEN WALL = NOT BY CENTRIA CCV-08
9 STUDS EXTERIOR SHEATHING BARRIER SELF ADHERING TAPE 3/4"[19] DEEP SUBGIRT SEALANT BASE DETAIL () (CC-7003) DESIGN OF BASE MUST VARY TO SUIT CONCRETE PLACEMENT AND FORMING TOLERANCES STUDS 3/4"[19] DEEP SUBGIRT EXTERIOR SHEATHING BARRIER SELF ADHERING TAPE SEALANT BASE DETAIL () (CC-7001) = NOT BY CENTRIA CCV-09
10 PARAPET 3/4"[19] SUBGIRT METAL CLOSURE (*) THROUGH FASTEN TO LOW CELL STUDS BARRIER EXTERIOR SHEATHING PARAPET (CC-7010) = NOT BY CENTRIA CCV-10
11 EXTERIOR SHEATHING SELF ADHERING TAPE BARRIER STUDS 3/4"[19] DEEP SUBGIRT METAL CLOSURE (*) THROUGH FASTEN TO LOW CELL STACK JOINT (CS-7004) = NOT BY CENTRIA CCV-11
12 EXTERIOR SHEATHING BARRIER SELF ADHERING TAPE 3/4"[19] DEEP SUBGIRT STUDS CURING BUTYL EXTEND BARRIER & AIR BARRIER WEATHER SEAL HEAD OPENING ( ) (CC-7000) PRIMARY AIR SEAL DOOR, WINDOW OR LOUVER = NOT BY CENTRIA CCV-12
13 EXTERIOR SHEATHING BARRIER STUDS PRIMARY AIR SEAL EXTEND BARRIER & AIR BARRIER CURING BUTYL DOOR, WINDOW OR LOUVER WEATHER SEAL 3/4"[19] DEEP SUBGIRT NON-CURING BUTYL EXTERIOR SHEATHING BARRIER JAMB OPENING (CC-7002B) STUDS PRIMARY AIR SEAL EXTEND BARRIER & AIR BARRIER CURING BUTYL DOOR, WINDOW OR LOUVER WEATHER SEAL 3/4"[19] DEEP SUBGIRT FIELD CUT LEG AS LOW CELL APPLICATIONS NON-CURING BUTYL JAMB OPENING (CC-7002) NON-CURING BUTYL = NOT BY CENTRIA CCV-13
14 EXTEND BARRIER & AIR BARRIER WINDOW OR LOUVER PRIMARY AIR SEAL METAL CLOSURE (*) THROUGH FASTEN TO LOW CELL CURING BUTYL 3/4"[19] DEEP SUBGIRT STUDS EXTERIOR SHEATHING BARRIER SILL OPENING () (CC-7005) = NOT BY CENTRIA CCV-14
15 INTERSECTION OF HEAD, JAMB & SILL (CC-7013) = NOT BY CENTRIA CCV-15
16 FIX POINT OPENING (CC-7022) = NOT BY CENTRIA CCV-16
17 STUD EXTERIOR SHEATHING 3/4"[19] SUBGIRT BARRIER AND AIR BARRIER SELF ADHERING TAPE SUPPORT FLASH EXTEND BARRIER & AIR BARRIER ONTO ABUTTING WALL & BED W/ CURING BUTYL POLYURETHANE END WALL () (CC-7006B) STUD EXTERIOR SHEATHING 3/4"[19] SUBGIRT BARRIER AND AIR BARRIER SELF ADHERING TAPE SUPPORT FLASH EXTEND BARRIER & AIR BARRIER ONTO ABUTTING WALL & BED W/ CURING BUTYL POLYURETHANE END WALL () (CC-7006A) = NOT BY CENTRIA CCV-17
18 EXTERIOR SHEATHING BARRIER AND AIR BARRIER STUDS SELF ADHERING TAPE 3/4"[19] SUBGIRT METAL AND COMPOSITION CLOSURES SOFFIT - FRONT () (CC-7016) 3/4"[19] SUBGIRT STUDS METAL AND COMPOSITION CLOSURES METAL CLOSURE (*) THROUGH FASTEN TO LOW CELL EXTERIOR SHEATHING BARRIER AND AIR BARRIER SOFFIT - BACK () (CC-7017) = NOT BY CENTRIA CCV-18
19 DESIGN MAY VARY DUE TO PANEL MODULE LAYOUT STUDS 3/4" [19] SUBGIRT EXTERIOR SHEATHING BARRIER NON-CURING BUTYL SUPPORT FLASH NON-CURING BUTYL OUT SIDE CORNER ( ) (CC-7007B) = NOT BY CENTRIA CCV-19
20 DESIGN MAY VARY DUE TO PANEL MODULE LAYOUT STUDS 3/4" DEEP SUBGIRT BARRIER EXTERIOR SHEATHING SUPPORT FLASH HIGH CELL DETAIL (CC-7009A) INSIDE CORNER (CC-7009B) LOW CELL DETAIL (CC-7009) = NOT BY CENTRIA CCV-20
21 NOTE:- REF. PAGE CCV-20 FOR SECTS. A-A & B-B PENETRATION DETAIL (CC-7012) = NOT BY CENTRIA CCV-21
22 BARRIER SELF ADHERING TAPE 3/4"[19] SUBGIRT ANGLE SUPPORT FLAT EXTERIOR SHEATHING BARRIER SECTION A-A (CC-7012A) STUDS SELF ADHERING TAPE SELF ADHERING TAPE ANGLE SUPPORT BARRIER FLAT FLASH PENETRATION DETAIL SECTION B-B (CC-7012B) POLYURETHANE SEALANT (TYPICAL ALL AROUND) PANEL CLIP CSC-3 EXTERIOR SHEATHING = NOT BY CENTRIA CCV-22
ELEVATION FOR DETAIL REFERENCE ONLY
8 4 5 6 9 16 10 15 11 SOFFIT 19 OUTSIDE CORNER 20 21 INSIDE CORNER 3 22 23 12 13 OPENING 14 END WALL 17 18 7 4 5 6 ELEVATION FOR DETAIL REFERENCE ONLY CSV-01 CSV-02 CSV-03 CSV-04 CSV-05 CSV-06 CSV-07 CSV-08
More informationELEVATION FOR DETAIL REFERENCE ONLY
5 6 8 9 1 10 15 SOFFIT OUTSIDE CORNER 16 18 19 12 OPENING 11 END WALL INSIDE CORNER 17 1 7 5 6 ELEVATION FOR DETAIL REFERENCE ONLY IWV-01 IWV-02 IWV-0 IWV-0 IWV-05 IWV-06 IWV-07 IWV-08 IWV-09 IWV-10 INDEX
More informationELEVATION FOR DETAIL REFERENCE ONLY
6 7 8 10 26 19 20 14 15 22 SOFFIT OUTSIDE CORNER INSIDE CORNER 23 25 24 25 5 27 28 29 16 11 OPENING 17 18 END WALL 21 12 13 9 6 7 8 ELEVATION FOR DETAIL REFERENCE ONLY CSH-01 CSH-02 CSH-03 CSH-04 CSH-05
More informationELEVATION FOR DETAIL REFERENCE ONLY
4 5 6 8 18 13 10 15 SOFFIT OUTSIDE CORNER INSIDE CORNER 16 17 3 19 20 11 9 OPENING 12 END WALL 14 7 4 5 6 ELEVATION FOR DETAIL REFERENCE ONLY EH-01 INDEX EH-02 STANDARD PANEL OFFERING EH-03 SIDE LAP DETAILS
More information12 - V0 CFP-12 PANEL INDEX. Delta Series CONCEALED FASTENED PANELS BUILDING PRODUCTS VERTICAL PANELS
CONCEALED FASTENED PANELS CFP-12 PANEL INDEX 12 - V0 BASE DETAILS HORIZONTAL JOINT DETAIL PARAPET ROOF DETAIL INSIDE CORNER DETAIL OUTSIDE CORNER DETAIL SOFFIT DETAIL WINDOW JAMB DETAIL WINDOW HEAD DETAIL
More informationFACE CFP - HORIZONTAL PANELS - OPTION 'B'
- Vertical Transitions 12F - H10.3 VHB TAPE 5.000" 127.0mm 5" FORMED TRANSITION STRIP w/ FLAT FACE CFP - - OPTION 'B' H10.3 CONCEALED FASTENED Panel Index 12F - H0 BASE DETAILS JOINT DETAIL PARAPET ROOF
More informationMR2 SERVICES Site Reconstruction 54 College Street Des Moines, IA
Existing Yard Security Light Proposed Rooftop Mechanical Screening (Slate Gray) Proposed 3 x4 x 4 x4 Windows Metal Awning Existing Doors Metal Siding(Slate Gray) Trim (Matte Black) 14 14 Proposed Addition
More informationCENTRIA Concept Series Metal Wall Panels ZINC
CENTRIA Concept Series Metal Wall Panels ZINC CENTRIA Concept Series Metal Wall Panels are a versatile design choice for wall cladding panels. They are manufactured with a variety of profiles and five
More informationELEVATION FOR DETAIL REFERENCE ONLY
#smr_elev 5b SEC 2 8i SEC 2 33 SEC 4 1a SEC 2 37 SEC 4 36 SEC 4 35 SEC 4 SOFFIT FRONT 6d SEC 2 7a SEC 2 SOFFIT REAR INSIDE CORNER (REAR) OUTSIDE CORNER (FRONT) 10a SEC 2 9b SEC 2 4e SEC 2 ELEVATION FOR
More informationSECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
More informationCOMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INDEX INSTALLATION SEQUENCE INSTALLATION SEQUENCE INSTALLATION SEQUENCE
COMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INSTALLATION SEQUENCE TT 5-8 TT- 13 INSTALLATION SEQUENCE INSTALLATION SEQUENCE TT- 4 TT-10 TT-14 TT-12 TT- 3 TT-11 TT-10 TT- 9 TT-11 TT- 2 INDEX (TT- 0): SYSTEM
More informationWeatherSmart Air Barrier Installation Guide
WeatherSmart Air Barrier Installation Guide 1 The intent of this document is to provide a guide for the installation of WeatherSmart as both a Weather Resistive Barrier (W.R.B.) and an Air Barrier Material
More informationFACADES - ACM BASE AT OVERHANG (WITH BASE FLASHING) INDEX SHEET
KPH-DS-01-MTLV KPH-PJ-01-MTLV KPH-PJ-02-MTLV KPH-PJ-03-MTLV KPH-PJ-04-MTLV KPH-PJ-05-MTLV KPH-BS-01-MTLV KPH-BS-02-MTLV KPH-BS-03-MTLV KPH-BS-04-MTLV KPH-OC-01-MTLV KPH-IC-01-MTLV KPH-SF-01-MTLV KPH-SF-02-MTLV
More informationGAF EnergyGuard Polyiso Wall Sheathing
From: Technical Services May 15, 2013 GAF EnergyGuard Polyiso Wall Sheathing GAF s EnergyGuard Polyiso Wall Sheathing is intended to be installed on residential construction only. Application types include:
More informationINSTALLING WATER-RESISTIVE BARRIERS & FLASHING
INSTALLING WATER-RESISTIVE BARRIERS & FLASHING IN A TWO-LAYER STUCCO APPLICATION Fortifiber Building Systems Group provides this guide to assist installers by demonstrating a two-layer installation of
More informationSECTION METAL WALL PANELS AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
SECTION 07 42 13.01 METAL WALL PANELS PART 1 GENERAL 1.1 REFERENCES AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA) AAMA 620 AAMA 621 Voluntary Specification for High Performance Organic Coatings
More informationCENTRIA Intercept Entyre Preformed Metal Modular Panel Wall System
CENTRIA Intercept Entyre Preformed Metal Modular Panel Wall System CENTRIA Intercept Entyre is a unique modular metal wall system designed, available from a reliable national manufacturer and supported
More informationPella 250 Series. Wood Frame Construction with Vinyl Siding... V250-ID-888 Wood Frame Construction with Brick Veneer...
SECTION DIRECTORY General Information Introduction... V250-ID-886 Installation Accessories and Applications... V250-ID-886 Typical Sealant Placement Details... V250-ID-887 Fin Installation Details Wood
More informationKARRIER PANEL - BRICK
KPH-DS-01-BRICK KPH-PJ-01-BRICK KPH-PJ-02-BRICK KPH-PJ-03-BRICK KPH-BS-01-BRICK KPH-BS-02-BRICK KPH-BS-03-BRICK KPH-OC-01-BRICK KPH-FO-01-BRICK KPH-FO-02-BRICK KPH-FO-03-BRICK KPH-FO-04-BRICK KPH-FO-05-BRICK
More informationPanel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint. Base Angle. Fasteners to Concrete 24 O/C Base Z Flashing
EXTERIOR BASE DETAIL (FLUSH) EXTERIOR BASE DETAIL (OVERHANG) Base Trim with Panel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint Sealant Marriage Bead to Vertical Panel Joint Above and Below Z Flashing
More informationCENTRIA FORMABOND. Aluminum Composite Wall System
CENTRIA FORMABOND Aluminum Composite Wall System CENTRIA FormaBond is the only true aluminum composite panel wall system designed, manufactured and fabricated by a single, reliable national manufacturer
More informationProper Installation of Insulated Metal Wall Panels
Proper Installation of Insulated Metal Wall Panels Insulated metal panels (IMPs) are an ideal cladding solution for pre-engineered metal buildings. They are available in lengths up to 50, and may also
More informationCentria Conversion SECTION METAL WALL PANELS AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
SECTION 07 42 13.03 METAL WALL PANELS PART 1 GENERAL 1.1 REFERENCES AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA) AAMA 620 AAMA 621 Voluntary Specification for High Performance Organic Coatings
More informationPrestige Series 12. Installation guide
Prestige Series 12 Installation guide PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS Section Page Notes to Designer/User.................... 2 Panel Options............................. 3 Panel Details..............................
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationCENTRIA FORMABOND II Metal Composite Wall System
CENTRIA FORMABOND II Metal Composite Wall System CENTRIA FormaBond II is the only true metal composite panel wall system designed, manufactured and fabricated by a single, reliable national manufacturer
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MORTAR AND MASONRY GROUT
SECTION 04110 MORTAR AND MASONRY GROUT PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. In the absence of other information, the methods and recommendations of the National Concrete Masonry Association
More informationENVELOPE The Ultimate In Performance In A Wet-Sealed System ROUT & RETURN (RR) SYSTEM TECHNICAL MANUAL
ENVELOPE 2000 ROUT & RETURN (RR) SYSTEM The Ultimate In Performance In A Wet-Sealed System TECHNICAL MANUAL System Assembly Substrate Layouts CAD Sections/Details Physical Properties Performance Properties
More informationPebbletex Wall System Class PB Exterior Insulation and Finish System providing a primary moisture barrier. Typical Details
Pebbletex Wall System Class PB Exterior Insulation and Finish System providing a primary moisture barrier Typical Details (THIS PAGE INTENTIONALLY LEFT BLANK Pebbletex Wall System Class PB Exterior Insulation
More informationCommercial Flashing Details
This technical note illustrates many of the most common flashing details for commercial buildings. The purpose for flashing is to direct moisture to the exterior and in so doing, prevent moisture from
More informationSchedule A Development Permit No Issued this 18 day of April, 2018
Schedule A Development Permit No. 001610 Issued this 18 day of April, 2018 N No. Revision/Issue Date MM/DD/YY 1 ISSUED FOR TENDER 10/26/17 LEGEND: WORK AREA VILLAGE STROLL VILLAGE GREEN SOUTH WING 1 0
More informationMagnum Board Coatings
Master Wall Mesh and Base Coat Plastic Control Joint Accessory, Plastic Components 22027-16 or equal. See notes for placement recommendations Notes: Control joints are required and should be located by
More informationGuide Specification for the OSI QUAD Window and Door Flashing System
Henkel Corporation 26235 First Avenue Westlake, OH 1-866-591-2178 www.ositough.com Guide Specification for the OSI QUAD Window and Door Flashing System Specifier Note: The purpose of this guide specification
More informationSC-01 Cross-Section. Cement Board Substrate Master Wall Mesh and Base Coat Superior Finish
Master Wall Mesh and Base Coat Plastic Control Joint Accessory, Plastic Components 22027-16 or equal. See notes for placement recommendations Notes: Control joints are required and should be located by
More informationThe better way to build TM. Installation Manual NAILBASE PANELS
The better way to build TM Installation Manual PANELS November 2018 SIPs Installation Manual Table of Contents Topics General Requirements................................... 3 Materials..............................................
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 061600 - SHEATHING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationWrapShield SA Brick Tie Penetration
Brick Tie Penetration Outboard Vapor - Pemeable Insulation WrapShield SA Self-adhered WRB/AB field membrane Brick Tie must be Flush and compressed against Membrane with no prong penetrations Gasketed Fastener
More informationMetafor Panel System Installation Guide
Installation Guide innovative cladding design solutions Product Description Universal Flashing Kit Supplemental Guide for VM Pro-Zinc Training To enroll in a VM PRO-ZINC Training Course contact: UMICORE
More informationCENTRIA Concept Series TM Metal Wall Panels
CENTRIA Concept Series TM Metal Wall Panels CENTRIA Concept Series Metal Wall Panels are a versatile design choice for wall cladding panels. They are manufactured with a variety of profiles, metal substrates,
More information200 / 300 SERIES PANELS COLD STORAGE
CS-DS-01-200/300 DISCLAIMER CS-CD-01-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CS-CD-02-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CONTINUED CI-PP-01-200 PANEL PROFILES 200 SERIES
More information900 SERIES PANEL SHEET INDEX ENDLAP INSTALLATION SEQUENCE L.E. W/ GUTTER VAPOR BARRIER CS-RK-01B-900
CS-PJ-01-900 CS-DS-01-900 CS-PJ-02-900 CS-EL-01-900 CS-EL-02-900 CS-EL-03-900 CS-EL-04-900 CS-RD-01-900 CS-RD-02-900 CS-RD-03-900 CS-EV-01A-900 CS-EV-01B-900 CS-EV-02A-900 CS-EV-02B-900 CS-EV-03A-900 CS-EV-03B-900
More informationENVELOPE The Ultimate In Performance In A Dry-Joint System RAINSCREEN (RS) SYSTEM TECHNICAL MANUAL
ENVELOPE 2000 RAINSCREEN (RS) SYSTEM The Ultimate In Performance In A Dry-Joint System TECHNICAL MANUAL System Assembly Substrate Layouts CAD Sections/Details Physical Properties Performance Properties
More informationINSTALLATION MANUAL. ZIP System R12 Sheathing. Contents. 07 ZIP System R12 Sheathing Window Installation 08 ZIP System R12 Sheathing Siding Guidelines
ZIP System R12 Sheathing INSTALLATION MANUAL Contents 02 ZIP System R12 Sheathing General Notes, Guidelines and Limitations 03 ZIP System R12 Sheathing Installation 05 ZIP System R12 Sheathing Non Structural
More informationUltra Wall System. CAD Detail Sets
Ultra Wall System CAD Detail Sets Contents Page UWS-CM CAVITYMATE Ultra Contents 1-0 FOR: Details continuing on 1-1 thru 1-17 Cavity cut XPS board to fit between ladder tie masonry ties in CMU walls UWS-SL
More informationCowhorn Residence. PHnw 2017 Cowhorn Residence
Cowhorn Residence LEARNINGOBJECTIVES Course Approved for CPHC Continuing Education Credits 1. Learn how to orient buildings based on site conditions and owner criteria 2. Understand the impact of site
More informationHow do you install yours?
How do you install yours? Darrell Paul Qualistat Building Performance Consultants CSA 440 Just about adding Peel & Stick? 1 Window and door problems Photos / videos Video available for viewing at INSTAGRAM
More informationSTRATUM GUARD I AND II An Exterior Insulation and Finish System with Drainage DSC106C. Stratum Guard I and II System Installation Details
STRATUM GUARD I AND II An Exterior Insulation and Finish System with Drainage DSC106C Stratum Guard I and II System Installation Details Stratum Guard I and II DETAIL Table of Contents NOTE SG.0.0.01 SG.0.0.02
More informationCENTRIA MetalWrap Insulated-Composite Backup Panel System
CENTRIA MetalWrap Insulated-Composite Backup Panel System CENTRIA MetalWrap Insulated Composite Backup Panel System is designed to be used with CENTRIA metal wall panel cladding to create a complete rainscreen
More informationNFPA 285 Assemblies. Table of Contents
Effective 12/16/2014 Supersedes all previous versions NFPA 285 Assemblies The following Henry assemblies meet the performance requirements of NFPA 285 as required by the International Building Code (2003,
More informationNCMA TEK TEK 19-5A FLASHING DETAILS FOR CONCRETE MASONRY WALLS
NCMA TEK National Concrete Masonry Association an information series from the national authority on concrete masonry technology FLASHING DETAILS FOR CONCRETE MASONRY WALLS TEK 19-5A Water Penetration Resistance
More informationARCHITECTURAL DESIGN GUIDE
HPCI BARRIER TM INSULATED METAL PANEL ARCHITECTURAL DESIGN GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY TABLE OF CONTENTS INTRODUCTION...6 RAINSCREEN WALL
More informationAcroWall-ES System. Class PB Exterior Insulation and Finish System providing a primary moisture barrier. Typical Details
Typical Details AcroWall-ES System Class PB Exterior Insulation and Finish System providing a primary moisture barrier 1. Typical AcroWall-ES System Application 2. Typical Aesthetic Reveal 3. Typical Window
More informationSenergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board
Senergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board NOTES Senergy Platinum CI Stucco Typical details for an
More informationCONTOUR CORRUGATED PANEL
CONTOUR CORRUGATED PANEL Table of Contents SECTION PAGE Designer Notes............................................... 1 Panel Net Coverage / Fasteners.................................... 2 ROOF Details
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationapplication instructions
application instructions FOUNDATIONS 76 & 120 SERIES PRIMED PANEL SIDING ARCHITECTURAL COLLECTION REVERSE BOARD & BATTEN AND STUCCO PANEL SIDING General At the time of manufacture, siding meets or exceeds
More informationCENTRIA Exposed Fastener Series Metal Wall Panels
CENTRIA Exposed Fastener Series Metal Wall Panels CENTRIA Exposed Fastener Series Metal Wall Panels are a versatile design choice for both new and retrofit projects. Exposed Fastener Metal Wall Panels
More informationBuilding Envelope Enclosures That Work, What Owners Want!
WEBINAR February 23, 2017 Building Envelope Enclosures That Work, What Owners Want! Will Ikerd, P.E. (TX), LEED AP Webinar Speakers Karl Strand President of Vertical Solutions Consulting Will Ikerd, PE
More informationSECTION SELF-ADHERING SHEET FLASHING
MANUFACTURER S GUIDE SPECIFICATIONS SECTION 076526 SELF-ADHERING SHEET FLASHING 900 Hensley Lane Wylie TX 75098 800-527-7092 www.carlisleccw.com 604129 03.24.15 Carlisle, Flexphalt, Sure-Seal and CAV-GRIP
More informationTABLE OF CONTENTS. 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers
version 2.5 updated as of 08.04.2017 2 TABLE OF CONTENTS 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers 2.0 ASSEMBLY 2.1 Sequence of Assembly 2.2 Preparation
More informationIce Rink Renovation & New Clubhouse
SECTION 074243- METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationStudent Services & Classroom Addition
SECTION 074243 - METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationBENCHMARK Evolution Axis
Sheet List EVO VT 00 B DIRECTION OF PREVAILING WIND VERTICAL PANEL JOINT & FASTENER LOCATIONS DIRECTION OF LAY FACTORY APPLIED WEATHER SEAL CONCEALED PANEL FIXING NOTE: FASTENER NUMBERS DEPEND ON THE ACTUAL
More informationDuPont Tyvek Air Barrier Installation Guidelines. Canadian Version. Version 2
DuPont Tyvek Air Barrier Installation Guidelines Helping you get the job done right Canadian Version Version 2 Table of Contents Applicable Products...2 Required Materials...2 Code Requirements...3 General
More informationNFPA 285 Assemblies. Table of Contents
Effective 1/7/2014 Supersedes all previous versions NFPA 285 Assemblies The following Henry assemblies meet the performance requirements of NFPA 285 as required by the International Building Code (2003,
More informationProduct and System Specifications DuPont Flashing Systems
DuPont Building Innovations March 2007 4417 Lancaster Pike Chestnut Run Plaza 721 Wilmington, DE 19805 1-800-448-9835 www.construction.tyvek.com Product and System Specifications DuPont Flashing Systems
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED RAINSCREEN SYSTEM
RAINSCREEN (H&J) SYSTEM INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630)
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED RAINSCREEN SYSTEM
RAINSCREEN (H&J) SYSTEM INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630)
More informationGA APPLICATION OF GYPSUM SHEATHING
1. Scope 1.1 This specification describes the minimum requirements for, and the methods of handling, storage, and application of, gypsum sheathing for use as a substrate for exterior claddings. 1.1.1 Exterior
More informationWHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED.
WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED. Build walls and ceilings with a strong base, sturdy reinforcements and much more with Phillips extensive line of high quality products. As a single source
More informationWall Assembly - ACM Metal Panel at Steel Stud Framing SCALE: 3" = 1'-0"
Thermafiber "RainBarrier 45" Nvelope "NH2" Bracket Adapter Nvelope Wall Bracket (90mm or as Req'd) ACM Metal Panel System Metal Panel Extrusion per ACM Manufactuer 1 2 " Self-Drilling Stainless Steel Fastener
More informationHenri Fennell, CSI/CDT ABX 2015
Henri Fennell, CSI/CDT ABX 2015 Henri is an architect and building envelope specialist with over forty years of experience in the construction industry. He was a pioneer in the solar industry, introduced
More informationEclipse Energy Guard. Product Information & Installation Manual General Installation Requirements
Product Information & Installation Manual 01 Important Notice to Buyers and Users of RoyOMartin wall system These instructions are not intended to cover every installation requirement, application, detail
More informationWEIGHT PER PIECE (LBS.)
PRODUCT DESCRIPTION DATA SHEET 04 73 19-US BASIC USE ProGUARD DP is intended to be installed over sheathing and waterproofing over steel or wood studs or over concrete masonry units or poured concrete
More informationProject Name Project # Project Information
SECTION 074229.00 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationContents. ZIP System R-Sheathing
ZIP System R-Sheathing 2 Contents 02 ZIP System R-Sheathing General Notes, Guidelines and Limitations 03 ZIP System R-Sheathing Installation 05 Structural Bracing to Resist Lateral Forces 06 ZIP System
More informationSECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More informationtypical section 1:50 Important:
00 Typical ventilated facade installation mounted with top hat channels onto external walls, awning soffit and fascia. 00 Wall panels are shown in varying heights, having open joints for ventilation of
More informationPHELPS STREET WICK AVENUE WEST RAYEN AVENUE N SITE PLAN. architecture llc T110 2,500 SF T130 1,225 SF T150 1,225 SF T170 2,620 SF
T110 2,500 SF T130 T150 T170 2,620 SF UNIT SUMMARY SUITE 1st 2nd 3rd 4th TOTAL 1 BEDROOM 0 4 4 4 12 (19%) 2 BEDROOM 3 4 4 4 15 (23%) 4 BEDROOM 8 10 10 10 38 (58%) TOTAL 11 18 18 18 65 BED COUNT 194 PHELPS
More information7.0 - EXAMPLE DETAILS
7.0 - EXAMPLE DETAILS The drawings represented herein are believed to be accurate and conforming to current design and construction practices. However, the drawings should be used as a reference guide
More information1 Exam Prep Architectural Sheet Metal Manual Tabs and Highlights
1 Exam Prep Architectural Sheet Metal Manual Tabs and Highlights These 1 Exam Prep tabs are based on the 2012 Sheet Metal and Air Conditioning Contractors' National Association, Inc., seventh edition.
More informationOCS ONE COAT STUCCO A custom blend of Portland cement, sand, extenders, fiber reinforcement and modifiers.
OCS ONE COAT STUCCO A custom blend of Portland cement, sand, extenders, fiber reinforcement and modifiers. Designed to save material by functioning as an exterior cladding in thicknesses ranging from 3/8
More informationKNIGHT WALL SYSTEMS GUIDE DETAILS:
KNIGHT WALL SYSTEMS GUIDE DETAILS: HCI System RAINSCREEN ATTACHEMNT HORIZONTAL ORIENTED GIRT VERTICAL PanelRail & RevealRail SYSTEM DEPTH: 1.5 INCHES (FACE OF RIGID INSULATION TO FACE OF RAIL) QUICK LINK:
More informationBuilding Envelope Solutions, Inc. Identifying solutions for better building performance
Building Envelope Solutions, Inc. Identifying solutions for better building performance SUPERGREEN LAM TM (Liquid-applied Membrane) Background of the development of SUPERGREEN LAM TM : Spray-applied polyurethane
More informationDow Corning Silicone Air Barrier System. A more. energy-efficient. shade. green
Silicone Air Barrier System of shade energy-efficient A more green Air and Moisture Protection for More Energy-Efficient Buildings Meeting regulatory requirements for energy efficiency is a significant
More informationInsulated Metal Panel (IMP) Systems
METL-SPAN Joseph Lstiburek, Ph.D., P.Eng. November, 2015 Table of Contents 1. Physics of Building Enclosures... 4 2. Physics of Insulated Metal Panels... 12 3. Joint Design... 19 4. Thermal Bridging...
More informationTruGrain 12 Inch Commercial Profile Installation Recommendations
TruGrain 12 Inch Commercial Profile Installation Recommendations o Delivery, Storage and Handling o General Requirements o Application of Stain & Sealer o Storage and Handling (Post-Treatment) o Installation
More informationGCP APPLIED TECHNOLOGIES PERM-A-BARRIER VPL 50
MASONRY ANCHOR DETAILING:. GASKETED STANDOFF ANCHOR 0 MIN.. SURFACE MOUNTED ANCHOR " MIN. 7 9. LADDER STYLE ANCHOR.. MASONRY ANCHOR DETAILING. S00, -INCH TROWELED BEAD. MORTAR COLLECTION MESH. PERM-A-BARRIER
More informationDIVISION 04 MASONRY CAST STONE. A. Design Considerations. 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone.
DIVISION 04 MASONRY 04720 CAST STONE A. Design Considerations 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone. 2. Care must be taken in the design of individual units
More informationESR-2072 Reissued September 1, 2013 This report is subject to renewal September 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2072 Reissued September 1, 2013 This report is subject to renewal September 1, 2015. A Subsidiary of the International Code Council
More informationWeep Valves Stucco Wire Mesh Reinforcement Weather Resistive Barrier Sheathing Insulation Framing
INSTALLATION INSTRUCTION FOR SINGLE-HUNG AND FIXED WINDOW REPLACEMENT using FLUSH FLANGE Installation Instructions for replacing windows in a Typical Stucco Application. These instructions were developed
More informationSECTION COMPOSITE METAL WALL PANEL SYSTEM (Accu-Trac Low Profile DS)
SECTION 07412 COMPOSITE METAL WALL PANEL SYSTEM (Accu-Trac Low Profile DS) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationAS Interpretation of External Waterproofing as it applies to Melbourne, Class 1 buildings
AS4654.2 Interpretation of External Waterproofing as it applies to Melbourne, Class 1 buildings Climate Zone: 6 Wind Class: N1 Membrane Types: Liquid Applied Class II and Class III as defined and tested
More informationSRP-AirOutshield UV Issued:
SECTION 07276: SRP-AirOutshield UV Ultra Violet (UV) resistant, Vapour Permeable Air Barrier Underlayment and Sheathing Membrane Guide Specification This specification is a guide only and may need editing
More informationFlushglaze For Steel Tube Applications and Horizontal Panels. Façades Installation Guide
Flushglaze 7500 For Steel Tube pplications and Horizontal Panels Façades Installation Guide September 2016 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal
More informationarchitectural design GuIde HPCI BarrIer Insulated metal Panel
architectural design GuIde HPCI BarrIer Insulated metal Panel table of contents INTRODUCTION...6 RAINSCREEN WALL BASICS...7 The Building Envelope...7 Basic Wall Types...7 RAINSCREEN WALL DESIGN...8 Rainscreen
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationDetail Drawings THE BEST PANEL COMPANY. from. 126 Old Highway 60 East Hardinsburg, Kentucky Office:
Detail Drawings from Rev. 4/2017 126 Old Highway 60 East Hardinsburg, Kentucky 40143 Office: 270-788-3535 www.bestpanelcompany.com Dri-Plane screen / similar / Similar Non-Corrosive Fastener designed to
More informationRESIDENTIAL INSULATED SHEATHING COMFORTBOARD. Installation Guide
RESIDENTIAL INSULATED SHEATHING TM COMFORTBOARD 80 Installation Guide Table of Contents Introduction How to Use this Guide...1 Split-Insulation Wall Assembly...2 Insulation... 3 Nominal and Effective R-Values
More information