Choosing INSULSPAN SIP Walls
|
|
- Solomon Crawford
- 6 years ago
- Views:
Transcription
1 Choosing INSULSPAN SIP Walls Please consult the complete Insulspan Design Manual EAST WEST
2 Structural Insulating Panels What are SIPS? The Insulspan Structural Insulating Panel (SIP) System consists of performance rated oriented strand board (OSB) structurally laminated to a core of insulation. Insulspan SIPS provides building owners with a proven method of constructing walls and roofs resulting in real energy cost savings while adding resale value to the building. Insulspan SIPS use closed-cell rigid EPS insulation cores which helps reduce air leakage and thermal bridging by providing a continuous layer of thermal insulation in both wall and roof assemblies. For over 28 years, Insulspan has been leading the industry in the development and manufacturing of structural insulated panels. Insulspan SIP System Options The Insulspan SIP System can be purchased as 4 by SIP Panels, Precut & Fabricated or Ready-toAssemble Panels. Each panel option requires varying degrees of expertise in working with SIPS both in terms of design knowledge and on-site fabrication requirements. OPTION 1: 4 by SIP Panels The basic panel option is to purchase Insulspan SIPs as 4 by units and complete all fabrication on site using skilled tradesmen familiar with SIPs. Insulspan SIPs are delivered to the fabrication location specified by the purchaser in dimensions from 4 foot by 8 foot up to 4 foot by 24 foot. Fabrication of SIPs to the required end use dimensions and insertion of connection material is completed using detail drawings prepared for the purchaser by a design professional familiar with SIP construction. It is important to highlight that this option requires construction on site using skilled tradesmen. OPTION 2: Pre-Cut, Fabricated Panels The second option is to purchase fabricated panels that are custom precut by Insulspan to match details prepared for the purchasers design professional. All panels are specifically shaped for the project and come to the job labeled and ready to start assembly. Fabricated panels will still need to have the connection splines and any structural lumber installed on site. In general, no cutting of panels is required in the field unless minor modifications are required as a result of differences between the approved shop drawings and the 2
3 SIP Options actual on-site conditions. These modifications will need to be incorporated into the final shop drawings. Before panels are modified on site, an Insulspan representative should be consulted to ensure structural aspects are considered. Advantages of this option include: 1. Allows the purchaser to manage on-site work force and keep work in the field for crews versus having the connection splines and any structural lumber completed by the manufacturer. 2. Since minimal or no field fabrication of the panels may be required, assembly of the panels can start immediately. 3. The purchaser has the option of having project-specific drawings prepared by their own design professional or using Insulspan in-house design staff to prepare shop drawings for review and approval prior to manufacturing. Ready-to-Assemble Panels The third option is to use the Insulspan industryleading ready-to-assemble (RTA) building system. Using this option all panel connection splines and structural lumber are pre-installed where possible. However, it does not eliminate the need for assembly in the field of panel components required to create openings such as windows and doors. Project-specific shop drawings are typically prepared using Insulspan in-house design staff for review and approval prior to manufacturing. Advantages of this option include: RTA Panels reduce construction time in the field. Improves efficiency in construction scheduling. Integrates all architectural and structural elements. Reduces construction loan financing time. 3
4 SIP Details SIP Wall/Deck/ICF SIP Wall Corner SIP Wall/Pre-Engineered wood truss SIP Joint/Single Lumber Spline Consult the Insulspan Installation Layout Drawings and the Insulspan Design Manual. 4
5 Detail Specifi cation Checklist Installation Drawings Complete HSB auto-cad drawings. Insulspan shop drawings are very detailed showing all panel confi gurations Deck connections Panel connections Glue and screw details Lumber insertion details Lumber ripping details Joint tape details Headers Lumber details Installation instructions Complete Pre-Cutting of SIP panels Full pre-cut of panels including all gable walls, valley and hip cuts All window and door openings are pre-cut All window and door openings are EPS foam relieved Panels are completely cut in the shop with all straight cuts Panels are completely cut in the shop with all mitre cuts Panels are completely cut in the shop with all bi-level cuts Panels come to the job site with all edge reliefs for inserting assembly splines Lumber supply, pre-cutting and installation in SIPS Window and door lumber bucking All built-up header material consisting of standard or engineered lumber Sub-fascia eave and rakes lumber pre-cut with angles for direct fi t into SIP panels Sub-fascia eave and rakes (supplied and cut but not installed in panel) All window and door openings have lumber bucks installed on the edges All window and door openings have designed headers completely assembled Top plates random lengths Bottom plates random lengths Corner and spline connections Insulspan will install all window and door connections in the factory Insulspan will pre-cut all rip and bevel material required in the factory Check the items you would Insulspan will install bevel material required in the SIP panels Details of lumber count provided for whole package: like to include in your project. Window and door material Header material consisting Top plate Code Double listings top plate and other certifications Third Corner Party connection Certifi cation lumber Building Valley material Code Compliance Reports ISO Shed 9001 dormer Quality plate Management System Sub fascia material Electrical chases Electrical chases pre-installed at all locations specifi ed by client Both horizontal and vertical chases installed at the factory as per client Electrical chases indicated in layout drawings Assembly accessories Approved joint sealant for all panel joints and connections Approved 2 -Part Polyurethane Foam sealant Assembly screws and washers Approved panel seal tape for all roof panel interior joints Approved roof panel edge sealant Approved exterior sheathing membrane Other products, tools and serives Lifting plates Foam scoop Chain saw guides Unloading fork extensions Shipping to the job site Finished grade glue-lam beamsfor all ridges and purlin supports Installation CD Insulspan design manual CD including all Product Informaiton Bulletins Site advisory services as specifi ced in sales contract Insulspan Limited Warranty registration 5
6 Features & Benefits For all levels of the product offering (4 by panel, pre-cut or RTA) Why choose Insulspan products? Performance of Building envelope Higher effective and Long term thermal resistance Reduced air infiltration Reduce condensation/moisture problems No insulation settlement No thermal drift Reduce outdoor air pollution All result in reduction of heat and cooling loss and lower long-term energy costs Quality Quality controlled precision cut manufactured in-plant product Quality engineered wood products backed by Code evaluations, third party certification and ISO CAD systems used to convert to SIP drawings with CNC high end fabrication techniques used Labeled with I.D. numbers in accordance with shop drawings and each edge has relief to standard profile All headers pre-cut and pre-assembled (optional) Proven assembly Accessories to ensure durability for the life of the building envelope Service Most comprehensive product and service offering for a SIP product A complete detailed installation drawings is prepared for your project with clear assembly instructions for the builder The best technical support available for clients and builders Quality training and site advisory service scheduled as required Sustainability Reduce harmful greenhouse gas emissions to the atmosphere Insulspan SIPs conserve scarce energy resources Reduce operation costs in buildings Ease of working with Insulspan Speed of assembly Achieve lock up faster Reduce labor and overhead costs
Ready to Assemble Panels. What are SIPs? Insulspan SIP System Options: Prefabricated Panels. Why buy Insulspan?
1 1 What are SIPs? The Insulspan Structural Insulating Panel (SIP) system consists of performance rated oriented strand board (OSB) structurally laminated to a core of insulation. Insulspan SIPs provides
More informationEnergy Panel Structures, Inc
Energy Panel Structures, Inc. 712-859-3219 www.epsbuildings.com 1. General Information The information provided in this manual is to be used as a general guide. Refer to detailed drawings provided by EPS
More informationSIPs over a steel frame Raised SIP floor
DESIGNING WITH SIPS SIP APPLICATIONS SIP APPLICATIONS SIPs over a steel frame Raised SIP floor Custom log home SIP APPLICATIONS SIP APPLICATIONS SIPS VS. STICK FRAME SIPS VS. STICK FRAME STICK FRAME Stick
More informationSIP Homes: Built for a Lifetime of Comfort and Value
Innovative Steel Structures (949) 607-9729 leosmarthomes@gmail.com SIP Homes: Built for a Lifetime of Comfort and Value In also offer high-performance, sustainable homes made with Structural Insulated
More informationMASTERFORMAT SPECIFICATION
Contact: PFB Manufacturing, LLC Insulspan SIP Plant 9012 East US 223 Blissfield, MI, USA 49228-0026 Phone: 800.726.3510 Plasti-Fab Ltd. Head Office 100, 2886 Sunridge Way N.E. Calgary, AB Canada, T1Y 7H9
More informationCopyright Materials INTRODUCTION TO SIPATO AN EMPLOYEE OWNED COMPANY. This presentation is protected by US and
The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES
More informationStructural Insulated Panels Dispelling the Myths to Give You the Green Edge with Surprising Paybacks By Patrick Egan, Thermocore Panel Systems
from Successful HOME BUILDING, September 2008 issue Structural Insulated Panels Dispelling the Myths to Give You the Green Edge with Surprising Paybacks By Patrick Egan, Thermocore Panel Systems In today
More informationSECTION A. ACSE 7 Minimum Loads for Buildings and other Structures.
SECTION 06 12 00 STRUCTURAL INSULATED PANELS ------------------------------------------------------------------------------------------------------------ PART 1- GENERAL ----------------------------- 1.1
More informationSECTION A. ACSE 7 Minimum Loads for Buildings and other Structures.
SECTION 06 12 00 STRUCTURAL INSULATED PANELS ------------------------------------------------------------------------------------------------------------ PART 1- GENERAL ----------------------------- 1.1
More informationThe better way to build TM. Installation Manual NAILBASE PANELS
The better way to build TM Installation Manual PANELS November 2018 SIPs Installation Manual Table of Contents Topics General Requirements................................... 3 Materials..............................................
More informationDate of Authorization APRIL 29, 2004 BMEC Authorization BMEC # BMEC Application #A
Building Materials Evaluation Commission 777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 Tel: 416: 585. 4234 / Fax: 416. 585. 7531 www.obc.mah.gov.on.ca Date of Authorization APRIL 29, 2004 BMEC Authorization
More informationCrockett Log & Timber Homes May December, 2017 Program Pricing Book
Homes Additions Outbuildings s Timber Frame Post & Beam Ultra R SIP Crockett & Timber Homes May December, 2017 Program Pricing Book Traditional White Pine Timber Frame Shell Materials - Appendix A Wall
More informationStructural Insulated Panels (SIPs) Commercial, Industrial and Residential Applications
Structural Insulated Panels (SIPs) Commercial, Industrial and Residential Applications This program is registered with the AIA/CES for continuing professional education. As such, it does not include content
More informationLamit Industries, Inc. 710 Marion Road Columbus, Ohio P-(614) F-(614)
Lamit Industries, Inc. 710 Marion Road Columbus, Ohio 43207 P-(614)444-3010 F-(614)444-4264 info@lamitindustries.com www.lamitindustries.com SECTION 06120 STRUCTURAL INSULATED PANELS PART 1 GENERAL 1.01
More informationtough by design. custom by choice kellyklosure.com Building innovative steel structures since 1968
tough by design. custom by choice. 800-228-7230 kellyklosure.com Building innovative steel structures since 1968 built well. built by you. Customized for a gritty power plant or an air-conditioned office,
More informationLamit Industries Nailbase Panels General Recommendations
Lamit Industries Nailbase Panels General Recommendations Lamit Industries Nailbase Panels Sizes Lamit Industries Nailbase Panels are made in a variety of sizes; most commonly 4 x 8. Consult Lamit Industries
More informationInsulated Cold-Formed Steel Wall Panels: A case study of a contractor-manufacturer
Insulated Cold-Formed Steel Wall Panels: A case study of a contractor-manufacturer Submitted to: Partnership for Advancing Technology in Housing U.S. Department of Housing and Urban Development Washington,
More informationTABLE OF CONTENTS. 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers
version 2.5 updated as of 08.04.2017 2 TABLE OF CONTENTS 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers 2.0 ASSEMBLY 2.1 Sequence of Assembly 2.2 Preparation
More informationPanelize Your Dreams. With Enercept, The Better Way To Build. Structural Insulated Panels The Builders Choice
Panelize Your Dreams With Enercept, The Better Way To Build. Structural Insulated Panels The Builders Choice www.enercept.com STRONGER ENERCEPT SIPS ARE 2 1/2 TIMES STRONGER THAN CONVENTIONAL STICK FRAMING.
More informationChapter 7. Roof Framing
Chapter 7. Roof Framing 7.1 ROOFING PREP WORK 7.2 INSTALLING ROOF TRUSSES 7.3 INSTALLING PORCH TRUSSES 7.4 SHEATHING ROOF 7.5 INSTALLING SUB-FASCIA 7.6 BUILDING AND INSTALLING SCUTTLE BOX 7.7 INSTALLING
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised February 6, 2015 the Richmond 16'x28' Building w/ full loft Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This
More informationFundamentals of Insulated Panel Installation. MBCEA 2016 Clearwater, FL
Fundamentals of Insulated Panel Installation MBCEA 2016 Clearwater, FL Fundamentals of Insulated Panel Installation Industrial Roof & Walls Not Architectural Not Cold Storage Topics Preparation Installation
More informationSentry Buildings. Assembly Book. the Richmond. 16'x32' Building w/ Full Loft. Revised February 6, 2015
Sentry Buildings Assembly Book Revised February 6, 2015 the Richmond 16'x32' Building w/ Full Loft Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775
More informationNatureScape. 3 Thermally Broken 2 Non-thermal
NatureScape 3 Thermally Broken 2 Non-thermal REASONS TO CONSIDER PREFABRICATED: Pre-designed, pre-engineered and pre-inspected, the NatureScape enclosure guarantees that the room will be delivered and
More informationINSPECTION GUIDELINES: STRUCTURAL INSULATED PANELS (SIPs)
Structural Insulated Panels Page 1 of 7 Revision Date: 05/22/2017 DEVELOPMENT SERVICES BUILDING INSPECTION INSPECTION GUIDELINES: STRUCTURAL INSULATED PANELS (SIPs) INSPECTION CODE: 111, 204, 216 SCOPE:
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06110 WOOD FRAMING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But Not Supplied
More information5V and CORRUGATED Accessory Detail Manual
5V and CORRUGATED Accessory Detail Manual NOA # 06-0921.07 Miami Dade Approved - 5V Only Site Specific Engineering Required Thompson Architectural Metal Roofing is proud to be a partner of the Energy Star
More informationassembly an open space between the roof and ceiling of a building attic balloon frame a joist constructed of steel with bars in the verticle web space
assembly two or more interconnected structural components combined to meet a specific function or design requirement attic an open space between the roof and ceiling of a building balloon frame a type
More informationTHE WORLD S GREENEST. Internal, External Cladding & Lining Products PANELISED BUILDING SYSTEM
THE WORLD S GREENEST Internal, External Cladding & Lining Products PANELISED BUILDING SYSTE Invest in Innovation to Lower Your Costs The Innova Building Kit Whether you build one home or one thousand homes
More information900 SERIES PANEL SHEET INDEX ENDLAP INSTALLATION SEQUENCE L.E. W/ GUTTER VAPOR BARRIER CS-RK-01B-900
CS-PJ-01-900 CS-DS-01-900 CS-PJ-02-900 CS-EL-01-900 CS-EL-02-900 CS-EL-03-900 CS-EL-04-900 CS-RD-01-900 CS-RD-02-900 CS-RD-03-900 CS-EV-01A-900 CS-EV-01B-900 CS-EV-02A-900 CS-EV-02B-900 CS-EV-03A-900 CS-EV-03B-900
More informationThe Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
More informationMID-RISE DESIGN & CONSTRUCTION
TECHNICAL BULLETIN No.38-021616 Rev072116 MID-RISE DESIGN & CONSTRUCTION Logix effective R-values range from R-24 to R-28+ Insulated concrete forms (ICF) are becoming a main stream choice for the construction
More informationFraming Methods Structural Components
Framing Methods Structural Components Balloon Framing *Balloon framing or Eastern framing the exterior studs run from the top of the foundation to the top of the highest level. Benefits of this type of
More informationA-ONE Insulated Forms Installation Manual
A-ONE Insulated Forms Installation Manual Rockford, MN www.aoneform.com www.diversifoam.com info@diversifoam.com A-ONE Manual 180426.docx Disclaimer Notice The information in the A-ONE Insulated Forms
More informationInstallation Guide. This installation guide is furnished as a supplement to the project specific panel installation drawings.
Installation Guide This installation guide is furnished as a supplement to the project specific panel installation drawings. Note: Variations from the contents of this guide can occur because of project
More informationTable of Contents. 1 Introduction. 2 Description. 3 Tools and materials. 4 Footings or slabs. 5 Coursing placement. 6 Reinforcing steel
Table of Contents 1 Introduction 2 Description 3 Tools and materials 4 Footings or slabs 5 Coursing placement 6 Reinforcing steel 7 Alignment scaffold installation 8 Concrete placement 9 Exterior and interior
More informationResidential Construction
Structural Insulated Panels (SIPs) are modern engineered building components that combine great structural strength with outstanding energy performance. ERECTING A STRUCTURALLY SOUND THERMALLY EFFICIENT
More informationCarpenter Level 2 Rev. September 2017
Level 2 A5 Site Layout II Duration: 14 hours 7 hours 7 hours Upon completion of this unit the apprentice will demonstrate knowledge of site layout tools and equipment and their applications and procedures
More informationSteps in Building a Shed
Steps in Building a Shed The design and location of your new shed will depend on how it will be used - a shed for storing tools will be much simpler than one you intend to use as a small shop. For example,
More informationSECTION R614 STRUCTURAL INSULATED PANEL WALL CONSTRUCTION
Section R614 Add new section to read as shown: (RB34-06/07) SECTION R614 STRUCTURAL INSULATED PANEL WALL CONSTRUCTION R614.1 General. Structural insulated panel (SIP) walls shall be designed in accordance
More informationSECTION STRUCTURAL INSULATED PANELS
SECTION 06120 STRUCTURAL INSULATED PANELS Copyright 2011-2012 Korwall Industries, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural Insulated Roof Panels. B. Structural Insulated
More informationDESIGN. Detailed planning and designing information on Premier Structural Insulated Panels (SIPs) Stronger. Straighter. Greener.
DESIGN Manual Detailed planning and designing information on Premier Structural Insulated Panels (SIPs) Stronger. Straighter. Greener. Table of Contents Introduction... 2 Premier s Tips for SIPs Success...
More informationErie County Technical School Construction Trades Duty/Task List
1 of 8 This program is endorsed by and meets the standards of the Association of Home Builders. Content Areas, Titles and Task Statements 00 Fundamentals of Construction Trades NAHB A Construction Hand
More informationT A B L E O F C O N T E N T S
T A B L E O F C O N T E N T S Company Profile.... 3 About SIP s 5 Our Products. 10 Export. 15 ImportanEvents.. 17 C o m p a n y P r o f I l e Company Profile InnovaEco Building System was founded by a
More informationRecord of Work Experiences Trade Qualifier or Pre-Apprenticeship Credits CARPENTER
Applicant Information Education, Skills and Labour Apprenticeship and Trades Certification Division Record of Work Experiences Trade Qualifier or Pre-Apprenticeship Credits CARPENTER Note to Apprenticeship
More informationSRP-AirOutshield ROOF Issued:
SECTION 07276: Breathable Underlayment Guide Specification This specification is a guide only and may need editing for the specific intended application. It is the responsibility of the design professional
More informationCarpentry. The following describes the scope and sequence of instruction for Carpentry.
Carpentry The Montgomery County Students Construction Trades Foundation, Inc has developed a comprehensive construction technology program designed to prepare students for a rewarding career in the construction
More informationInstallation Guidelines
Installation Guidelines The Vertibreak Wall System: Installation Guidelines Rainscreen Insulation for New or Retrofit Construction Applications Vertibreak rainscreen insulation is an expanded polystyrene
More informationFixed Skylight / Fixed Multiple Skylight Milgard Aluminum Window
Skylight Fixed Skylight / Fixed Multiple Skylight Milgard Aluminum Window The Series Skylight has been specifically designed to provide maximum thermal efficiency by incorporating a special polyurethane
More informationResidential Design with Structural Insulated Panels
Sponsor Structural Insulated Panel Association (SIPA) P.O. Box 39848 Fort Lauderdale, FL 33339 Phone: 253 858 7472 Residential Design with Structural Insulated Panels Provider: Structural Insulated Panel
More informationSECTION METAL ROOF PANELS
SECTION 07 41 13 PART 1 GENERAL 1.1 SECTION INCLUDES A. Standing-seam roof panels. B. Metal roofing accessories. 1.2 RELATED SECTIONS A. Section 07 62 00 - Sheet Metal Flashing. B. Section 07 72 00 - Roof
More informationA.ENVELOPE AIR SEALING
(Page 1 of 4) Note: The Energy Efficiency Standards Section 110.7 requires that all joints, penetrations and other openings in the building envelope that are potential sources of air leakage shall be caulked,
More informationQuality Insulation Installation (QII) Insulation Installation (Page 1 of 4)
Quality Insulation Installation (QII) Insulation Installation (Page 1 of 4) A. QUALITY (QII) PREPARATION FOR INSULATION 01 Air barrier installation and preparation for insulation was done and verified
More informationSECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
More informationAFM Corporations Juniper Path, Suite 260 Lakeville, MN 55044
DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT Housing - Federal Housing Commissioner TO: DIRECTORS, SINGLE FAMILY HOCs DIRECTORS, MULTIFAMILY HUBs STRUCTURAL ENGINEERING BULLETIN NO. 1104 Rev. 6 Supersedes
More informationPresents. Roofing Basics
Presents Roofing Basics Terminology Tile: A roof tile may be curved or flat piece of baked (at times glazed) clay or a synthetic material. It is the basic block used in covering roofs, walls, and floors.
More informationChapter 14 - Air Sealing
Chapter 14 - Air Sealing Contents Chapter 14 - Air Sealing... 14-1 Pre-Mechanicals Activities... 14-3 Insulate Bathtub Enclosures... 14-3 Insulate Double Walls and Chases... 14-3 Pre-Inspection Checklist...
More informationHansen Pole Buildings Planning Guide. Toll Free / Toll Free FAX
Hansen Pole Buildings Planning Guide Toll Free 866-200-9657 / Toll Free FAX 866-200-9658 While we strive to earn your business, whether you purchase from us or not, we would hope you would utilize this
More informationRevision Date: April 01, Premier Vinyl Enclosure
Premier Vinyl Enclosure www.urbanindustries.com 53 Urban Industries, Inc. 2008 Tools The following tools are recommended for the installation of the Premier Vinyl Enclosure and roof. 1 2 Level 1 4 Level
More informationGenesis. Light-Steel Structural Projects. Build with the Global Green Building Experts
Genesis Light-Steel Structural Projects Build with the Global Green Building Experts A Turnkey Approach to Green Building Structures Structural Light-Steel Systems Benefits Social and Health No harmful
More informationSIPs Structural Insulated Panels System. The building technology of the future
SIPs Structural Insulated Panels System The building technology of the future What are SIPs? Structural Insulated Panels (SIPs) are prefabricated insulated structural elements for use in building walls,
More informationPS 3000 Installation Manual Step-By-Step Procedures C.9. DOOR AND WINDOW OPENINGS C.9.1 PREPARE IN ADVANCE. C.9.2 VBUCK CONSTRUCTION.
C.9. DOOR AND WINDOW OPENINGS Openings for doors and windows are formed with bucks, or frames, which are constructed to the rough opening dimensions required for the doors and windows to be installed.
More informationSECTION PRE-ENGINEERED WOOD POST FRAME BUILDING SYSTEM. B. Products Supplied But Not Installed Under This Section:
SECTION 13125 FRAME BUILDING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Primary and secondary wood structural framing systems, roofing and wall covering systems, roof and wall insulation,
More informationINSTALLATION GUIDE.
INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Gerard Canyon Shake counter batten
More informatione3co System Design Team Dustin Avila, Megan Buchheit, Ryan Chua, Chris Hohman, Emily Rumberger Design Advisor Prof. Gregory Kowalski Abstract
e3co System Design Team Dustin Avila, Megan Buchheit, Ryan Chua, Chris Hohman, Emily Rumberger Design Advisor Prof. Gregory Kowalski Abstract This report describes design enhancements and validation testing
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationNational Association of Home Builders. Panelized Homes. Custom Designs, Your Building Solution.
National Association of Home Builders Panelized Homes Custom Designs, Your Building Solution www.nahb.org/panel What is a Panelized Home? Today s builders and buyers recognize that building a new home
More informationCOMMERCIAL & INDUSTRIAL CI-CFR-INDEX SHEET INDEX CI-CFR-INDEX SHEET INDEX CI-CFR-INFO C & I DISCLAIMER
CI-CFR-INDEX SHEET INDEX CI-CFR-INFO C & I DISCLAIMER CI-CFR-LG LEGEND CI-CFR-JT-01 PANEL JOINT CI-CFR-JT-02 PANEL JOINT SEQUENCE CI-CFR-JT-03 PANEL JOINT LAYOUT CI-CFR-SQ-01 PANEL INSTALLATION SEQUENCE
More informationChapter 32 - Garage. June 2015 Garages 32-1
Chapter 32 - Garage Contents Chapter 32 - Garage... 32-1 Foundation... 32-3 Walls... 32-3 Roof Framing... 32-4 Roofing... 32-4 Exterior Dow Board... 32-5 Doors... 32-5 Siding... 32-5 Gutters... 32-6 Painting...
More informationIntegrated Air & Water Barrier Systems
Integrated Air & Water Barrier Systems Presented by [ Jeff Presenter s Key, Georgia-Pacific Name ] Wood Products AIA Course: GP-FF-WRBAB Credit Designation: LU HSW Please add relevant logo here Disclaimer:
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06 1100 WOOD FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But
More informationHigh Performance Walls:
High Performance Walls: Advanced Framing Walls Systems and Insulated Headers Karyn Beebe, PE, LEED AP APA The Engineered Wood Association Quality Services Division Technical Services Division Field Services
More informationHigh Performance Walls:
High Performance Walls: Advanced Framing Walls Systems and Insulated Headers Karyn Beebe, PE, LEED AP APA The Engineered Wood Association Quality Services Division Technical Services Division Field Services
More informationGuide Specification for the OSI QUAD Window and Door Flashing System
Henkel Corporation 26235 First Avenue Westlake, OH 1-866-591-2178 www.ositough.com Guide Specification for the OSI QUAD Window and Door Flashing System Specifier Note: The purpose of this guide specification
More informationTHE SUPERIOR ROOF & WALL SYSTEMS ROOF WALL & HEADER SYSTEM
ROOF & WALL SYSTEMS "After 37 years experience, over 3,000 homes, I spent 2 years researching the market for affordable, energy efficient products for the emerging wave of "green housing". I use the Ray-Core
More informationHow do you install yours?
How do you install yours? Darrell Paul Qualistat Building Performance Consultants CSA 440 Just about adding Peel & Stick? 1 Window and door problems Photos / videos Video available for viewing at INSTAGRAM
More informationPacific Tile Counter Batten and Batten
Pacific Tile Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation
More informationPacific Tile Counter Batten and Batten
Pacific Tile Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com Page2 INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation
More informationRESOURCE EFFICIENT WOOD FRAMING TECHNOLOGY FROM JAPAN
09-020 RESOURCE EFFICIENT WOOD FRAMING TECHNOLOGY FROM JAPAN James Scott BREW 1 1 LHB, Inc., 21 West Superior St., Suite 500, Duluth, MN, 55802, USA, james.brew@lhbcorp.com AIA, FCSI, CCS, CCCA, LEED Accredited
More informationMay 2013 CONSTRUCTION MANUAL
May 2013 CONSTRUCTION MANUAL Table of Contents Limitations... 1 Panel Specification... 2 Facing Material (OSB)... 2 Adhesive Material... 2 Core Material... 2 Panel Weight... 3 Panel Insulation... 3 Panel
More informationClassic and NB Tile Counter Batten and Batten
Classic and NB Tile Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation
More informationCarpentry/Carpenter CIP Task Grid
Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
More informationOUR COMPANY OUR WARRANTY OUR GUARANTEE
DESIGN MANUAL-USA FRAMED BY QUALITY BUILT WITH SUCCESS OUR COMPANY At International Beams Inc. we take pride in providing our customers with premium quality products and services. Our full range of engineered
More informationSTRUCTURAL SOLUTIONS
STRUCTURAL SOLUTIONS Stock Building Supply is a leading building materials and solutions provider for home builders and remodelers across the US. We offer a mixture of structural frame components and turnkey
More informationSection 5 Crew Requirements
Section 5 Crew Requirements Panel Fabrication After the home s design has been approved by the client and permitting agencies, Nexframe will begin production according to the construction schedule. The
More informationALLMET CONTINENTAL INSTALLATION GUIDE
ALLMET CONTINENTAL INSTALLATION GUIDE www.allmet.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Allmet Continental
More informationA. Meet at Project site <insert number> days before starting installation.
SECTION 074643 - COMPOSITION SIDING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Engineered wood cladding. 2. Soffit panels. 3. Trim and fascia. 4. Sealant. 5. Weather barrier. 6. Flashing. 1.2
More informationSTRUCTURAL INSULATED PANEL ASSOCIATION (SIPA) Title 24 & High Performance Wall Solutions: Structural Insulated Panel Systems (SIPS)
STRUCTURAL INSULATED PANEL ASSOCIATION (SIPA) Title 24 & High Performance Wall Solutions: Structural Insulated Panel Systems (SIPS) California SIPS Structures Why SIPS Walls, Attics & Enclosures? SIPS
More informationPRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels (06 12 16) Report Holder General Panel Corporation PO Box 279 2604 Sunset Drive Grenada, Mississippi
More informationDL-200. Specifications
DL-200 Specifications Everlast Metals 10 Enterprise Court Lebanon, PA 17042 Phone: (717) 270-6554 Fax: (717) 270-6569 www.everlastmetals.com 7410 Structural Preformed Metal Roofing PART 1: GENERAL 1.01
More informationGETTING STARTED... 2 YOUR LIST OF PRODUCTS... 2 WHAT THAT LIST BECOMES... 2 PRODUCTS CREATED AS ENVISIONEER ELEMENTS... 3
Creation Using a custom Envisioneer database allows you to apply your real world products to each of your Envisioneer designs and estimates. We will create for you an openly configurable database of your
More informationIntroducing TJ Insulated Structural Framing Components
#TJ-9009 SPECIFIER S GUIDE TJ INSULATED HEADERS, RIM BoaRD, AND CORNERS Introducing TJ Insulated Structural Framing Components Helps meet the 2011 Federal Energy Star Homes and 2009 International Energy
More informationSSL-175. Specifications
SSL-175 Specifications Everlast Metals 10 Enterprise Court Lebanon, PA 17042 Phone: (717) 270-6554 Fax: (717) 270-6569 www.everlastmetals.com 7410 Preformed Metal Roofing PART 1: GENERAL 1.01 SECTION INCLUDES
More information238T Aluminum Standing Seam Metal Roof System (SSMRS)
238T Aluminum Standing Seam Metal Roof System (SSMRS) Text in red are instructions to the specifier and should be deleted. Text in blue are choices that need to be made, with those not selected, deleted.
More informationBuilding with SIPs. An Introduction to Structural Insulated Panels. Patrick Sughrue
Building with SIPs An Introduction to Structural Insulated Panels Patrick Sughrue 2005 Patrick Sughrue Getting the sun s energy into a building is easy, but making good use of it is both an art and a science.
More informationADVANCED WALL FRAMING
Technology Fact Sheet ADVANCED WALL FRAMING Build efficiently, use less material, and save energy! Buildings for the 21st Century Buildings that are more energy efficient, comfortable, and affordable that
More informationEvaluation Report CCMC R Insulspan Structural Insulated Panel (SIP) System
Evaluation Report CCMC 13016-R Insulspan Structural Insulated Panel (SIP) System MasterFormat: 06 12 16.01 Evaluation issued: 2001-10-29 Re-evaluated: 2018-09-26 1. Opinion It is the opinion of the Canadian
More informationBARREL VAULT Tile Counter Batten and Batten Installation Guide
BARREL VAULT Tile Counter Batten and Batten Installation Guide www.boral.com Page2 BARREL VAULT Tile Actual Size= 43 13/16 x 15 5/8 Exposure= 43 1/4 x 14 Weight= 5.4lbs. per panel Panels per square (100
More informationU.S. EDITION RESIDENTIAL CONSTRUCTION DETAILS SAMPLE. A visual guide to construction detailing. Emma Walshaw
RESIDENTIAL CONSTRUCTION DETAILS U.S. EDITION A visual guide to construction detailing Emma Walshaw Contents INTRODUCTION 4 PRINCIPLES OF CONSTRUCTION DETAILING 6 FOUNDATIONS 9 PRINCIPLES OF FOUNDATION
More informationADDENDUM NO Refer to Specifications Section Alternates. Clarifications to alternate descriptions are as follows:
ADDENDUM NO. 1 TO THE DRAWINGS AND SPECIFICATIONS FOR THE New Dishman-McGinnis Elementary School Bowling Green Independent Schools Bowling Green, Kentucky BG 12-256 RTA 1209 March 11, 2013 To All Plan
More information