JL Fire Vents - Guide Submittal / Specifications
|
|
- Oswald Wilkinson
- 6 years ago
- Views:
Transcription
1 SECTION ( ) JL Fire Vents - Guide Submittal / Specifications PART 1: GENERAL 1.01 RELATED DOCUMENTS A. Conditions of the Contract and portions of Division One of this Project Manual apply to this Section as though repeated herein SUMMARY Select one or more of the following subparagraphs as required by the Project. A. Section Includes: 1. FM Approved/UL Listed Double Leaf Fire Vent. 2. FM Approved Double Leaf Domed Fire Vent. 3. Gravity Ventilator Curb Mounted Fire Vent. 4. Domed Fire Vent SUBMITTALS A. Product Data: For each type of fire vent indicated. Include manufacturer's model number and accessories and requirements for roughing-in dimensions DELIVERY, STORAGE AND HANDLING A. Packing, Shipping, Handling and Unloading: Deliver fire vent as a factory assembled unit in manufacturer s original packaging. B. Store materials in a dry, protected, well-vented area. The contractor shall thoroughly inspect product upon receipt and report damaged material immediately to delivering carrier and note such damage on the carrier s freight bill of lading. PART 2: PRODUCTS 2.01 MANUFACTURER A. J L Industries, Incorporated 4450 West 78th Street Circle Bloomington, MN Telephone: (952) /(800) FAX: (952) WEB: JLindustries.com 2.02 MANUFACTURED UNITS A. FM Approved/UL Listed Double Leaf Fire Vent. Select one or more of the following for each FM approved/ul listed double leaf fire vent size. If more than one size is required for the project, identify each type on a schedule located on the drawings and identify each type in the specification section. Custom sizes are available.
2 1. Model: UFV-1; 48 inches by 48 inches clear opening. 2. Model: UFV-2; 48 inches by 72 inches clear opening. 3. Model: UFV-3; 48 inches by 90 inches clear opening. 4. Model: UFV-4; 48 inches by 96 inches clear opening. 5. Model: FFV-1; 48 inches by 48 inches clear opening. 6. Model: FFV-2; 48 inches by 72 inches clear opening. 7. Model: FFV-3; 48 inches by 90 inches clear opening. 8. Model: FFV-4; 48 inches by 96 inches clear opening. 9. Model: FFV-5; 60 inches by 60 inches clear opening. 10. Model: FFV-6; 60 inches by 96 inches clear opening. 11. Model: FFV-7; 60 inches by 120 inches clear opening. 12. Model: FFV-8; 60 inches by 144 inches clear opening. 13. Model: FFV-9; 66inches by 144 inches clear opening. 14. Model: FFV-10; 72 inches by 72 inches clear opening. 15. Characteristics: a. Curbs and Curb Frame: 14 gauge galvanized steel; fully welded; gasketed; insulated. b. Covers: 11 gauge aluminum with heavy gauge 3/16 inch aluminum pivot hinges; insulated. c. Finish: Factory primed. Higher temperature fusible links are available upon request. d. Fusible Link: 165 F; UL listed. e. Drives: Torsion springs. f. Speed Control: Shock absorbers. g. Manual Operation: Interior and exterior pull handles. B. FM Approved Double Leaf Domed Fire Vent. Select one or more of the following for each FM approved double leaf domed fire vent size. If more than one size is required for the project, identify each type on a schedule located on the drawings and identify each type in the specification section. Custom sizes are available. 1. Model: FDFV-1; 48 inches by 48 inches clear opening. 2. Model: FDFV-2; 48 inches by 72 inches clear opening.
3 3. Model: FDFV-3; 48 inches by 90 inches clear opening. 4. Model: FDFV-4; 48 inches by 96 inches clear opening. 5. Model: FDFV-5; 60 inches by 60 inches clear opening. 6. Model: FDFV-6; 60 inches by 96 inches clear opening. 7. Model: FDFV-7; 72 inches by 72 inches clear opening. 8. Characteristics: a. Curbs and Curb Frame: 14 gauge galvanized steel; fully welded; gasketed; insulated. b. Covers: 11 gauge aluminum with heavy gauge 3/16 inch aluminum pivot hinges; insulated. c. Dome Frame: inch aluminum with self-contained sloping condensation and weepage gutter. d. Dome: One piece [clear] [translucent] acrylic dome. e. Finish: Factory primed. Higher temperature fusible links are available upon request. f. Fusible Link: 165 F; UL listed. g. Drives: Torsion springs. h. Speed Control: Shock absorbers. i. Manual Operation: Interior and exterior pull handles. C. [Aluminum] [Galvanized Steel] Gravity Ventilator Curb Mounted Fire Vent. Select one or more of the following for each gravity ventilator curb mounted fire vent size. If more than one size is required for the project, identify each type on a schedule located on the drawings and identify each type in the specification section. Custom sizes are available. The first option for each model size is fabricated from aluminum, the second option for each model size is fabricated from galvanized steel. 1. Model: [GVFVA-1] [GVFVG-1]; 48 inches by 48 inches clear opening. 2. Model: [GVFVA-2] [GVFVG-2]; 48 inches by 60 inches clear opening. 3. Model: [GVFVA-3] [GVFVG-3]; 48 inches by 72 inches clear opening. 4. Model: [GVFVA-4] [GVFVG-4]; 48 inches by 90 inches clear opening. 5. Model: [GVFVA-5] [GVFVG-5]; 48 inches by 96 inches clear opening. 6. Characteristics: a. Retaining and Curb Frame: [Aluminum] [Galvanized steel]. b. Dome Frame: Extruded aluminum with self-contained sloping condensation and weepage gutter. c. Louver Blades: [Aluminum] [Galvanized steel].
4 d. Dome: One piece [clear] [translucent] acrylic dome. e. Finish: Factory primed. f. Louver Height: 9 inches. g. Louver Width: 2 inches. h. Hardware: Safety stops, heavy duty 3/16 inch aluminum hinges, chrome vanadium torsion springs and lifting arms. D. [Aluminum] [Galvanized Steel] Domed Fire Vent. Select one or more of the following for each domed fire vent size. If more than one size is required for the project, identify each type on a schedule located on the drawings and identify each type in the specification section. Custom sizes are available. The first option for each model size is fabricated from aluminum, the second option for each model size is fabricated from galvanized steel. 1. Model: [DFVA-1] [DFVG-1]; 48 inches by 48 inches clear opening. 2. Model: [DFVA-2] [DFVG-2]; 48 inches by 60 inches clear opening. 3. Model: [DFVA-3] [DFVG-3]; 48 inches by 72 inches clear opening. 4. Model: [DFVA-4] [DFVG-4]; 48 inches by 90 inches clear opening. 5. Model: [DFVA-5] [DFVG-5]; 48 inches by 96 inches clear opening. 6. Characteristics: a. Retaining and Curb Frame: [Aluminum] [Galvanized steel]. b. Dome Frame: inch extruded aluminum with self-contained sloping condensation and weepage gutter. c. Dome: One piece [clear] [translucent] acrylic dome. d. Finish: Factory primed. e. Hardware: Safety stops, heavy duty 3/16 inch aluminum hinges, chrome vanadium torsion springs and lifting arms. E. [Aluminum] [Galvanized Steel] Fire Vent. Select one or more of the following for each fire vent size. If more than one size is required for the project, identify each type on a schedule located on the drawings and identify each type in the specification section. Custom sizes are available. The first option for each model size is fabricated from aluminum, the second option for each model size is fabricated from galvanized steel. 1. Model: [FVA-1] [FVG-1]; 48 inches by 48 inches clear opening. 2. Model: [FVA-2] [FVG-2]; 48 inches by 60 inches clear opening. 3. Model: [FVA-3] [FVG-3]; 48 inches by 72 inches clear opening. 4. Model: [FVA-4] [FVG-4]; 48 inches by 90 inches clear opening. 5. Model: [FVA-5] [FVG-5]; 48 inches by 96 inches clear opening.
5 6. Characteristics: a. Lid, Curb and Curb Frame: [Aluminum] [Galvanized steel]. b. Hardware: Safety cable, heavy duty 3/16 inch aluminum hinges, chrome vanadium torsion springs and lifting arms. PART 3: EXECUTION 3.01 EXAMINATION A. Examine areas and conditions affecting installation. Do not proceed with installation until unsatisfactory conditions have b 3.02 INSTALLATION A. Install system level and plumb, and in accord with manufacturer s written instructions, original design and referenced standards ADJUSTING A. Adjust for proper operation. Replace any parts that prevent the fire vent from operating properly CLEANING A. Remove all debris caused by installation of the fire vent. Clean all exposed surfaces to as fabricated condition and appearance PROTECTION A. Provide protection of the completed installation until completion of the project. Repair any damage at no additional cost SCHEDULES If more than one type of fire vent is required, provide a schedule similar to the following example below. Use the corresponding type designations here and on the drawings, A. Type 1: [Describe by model]. B. Type 2: [Describe by model]. C. Type 3: [Describe by model].
Roof Accessories. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents
Roof Accessories Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 www.bestmaterials.com Email: Sales@BestMaterials.com Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division
More informationRoof Accessories. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents.
Roof Accessories Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division 07 72 36 Smoke Vents www.activar.com Construction Products Group ROOF HATCH: Galvanized Steel or Aluminum RHG & RHA
More informationROOF ACCESSORIES Division Rooftop Pipe Supports Division Roof Hatches
ROOF ACCESSORIES Division 07 72 30 Rooftop Pipe Supports Division 07 72 33 Roof Hatches Roof Safety Railings Safety Posts Equipment Hatches Division 07 72 36 Smoke Vents ROOF HATCH - LADDER ACCESS DIAMOND
More informationRoof AccessoRies. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents. Construction Products Group
Roof AccessoRies Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division 07 72 36 Smoke Vents Construction Products Group RooF HaTcH: Galvanized Steel or aluminum RHG & RHa Series certifications:
More informationSECTION ROOF ACCESSORIES PART 1 GENERAL 1.1 RELATED DOCUMENTS
SECTION 07 72 00 ROOF ACCESSORIES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationLOG COLLEGE MIDDLE SCHOOL
PART 1-GENERAL 1.1 SUMMARY A. This section includes the following: 1. Curb-mounted plastic glazed skylights. B. Refer to roofing system sections for roofing accessories to be built into the roofing system
More informationSECTION INDUSTRIAL ACCESS / INSPECTION HATCH. A. Industrial Access / Inspection Hatch: Model AH-710
Page 1 of 6 PART 1 - GENERAL SECTION 08370 INDUSTRIAL ACCESS / INSPECTION HATCH 1.1 SECTION INCLUDES A. Industrial Access / Inspection Hatch: Model AH-710 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry
More informationSECTION ACCESS DOORS AND FRAMES
11303, 26 th avenue Montreal, Quebec Canada H1E 6N6 Phone: (800) 479-1489 Fax: (800) 297-1489 PRODUCT GUIDE SPECIFICATION SECTION 08 31 00 S PART 1 - GENERAL 1.1 SUMMARY A. Provide access doors, frames
More informationSECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN
SECTION 08350 MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION COMMERCIAL CURB-MOUNT ACRYLIC DOUBLE DOME SKYLIGHTS
SECTION 08620 COMMERCIAL CURB-MOUNT ACRYLIC DOUBLE DOME SKYLIGHTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSPECIFICATIONS SECTION UL LISTED HEAT AND SMOKE VENTS
SPECIFICATIONS SECTION 07 72 00 PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Prefabricated UL Listed heat and smoke vents, with Skypro UL 972 Impact resistant Skywave Arc domed lids, curbs, hardware
More informationSunWave Smoke Vent. Product Information. Description: Selection Information: Smoke Vents (Acrylic and Polycarbonate): Method of Application: Storage:
Item Description Smoke Vent Product Information Description: Smoke Vents (Acrylic) provide a double glazed, 100% Impact Modified 0.181" outer lens and a 50% Impact Modified 0.120" inside lens that is hail
More informationSECTION HVAC GRAVITY VENTILATORS
SECTION 23 37 23 HVAC GRAVITY VENTILATORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationL-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System
Version 5.22.13 L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER
More informationMETAL LADDERS (LADDER SAFETY GATE FALL PROTECTION)
Page 1 of 6 SECTION 05515 METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION) PART 1 - GENERAL 1.1 SECTION INCLUDES A. Specialty custom designed, spring assisted, self-closing LADDER SAFETY GATE (LSG) for
More informationSECTION ROOF ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 72 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationSECTION ACCESS DOORS AND FRAMES
SECTION 08310 ACCESS DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. [Fire rated] [and] [Non-fire rated] wall access panels. 2. [Fire rated] [and] [Non-fire rated] ceiling access
More informationSECTION SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationSECTION ACCORDION FOLDING PARTITIONS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationSPECIFICATION SECTION : FIRE RATED GLASS & FRAMING GPX Architectural Series Framing
Welcome to the SAFTIFIRST TM Guide Specification System prepared as an aid to specifiers in preparing written construction documents. For specification assistance with specific product applications, please
More informationSECTIONAL OVERHEAD DOORS SECTION SECTIONAL OVERHEAD DOORS PART 1 GENERAL
13686.00 SECTIONAL OVERHEAD DOORS 083613-1 1.1 RELATED DOCUMENTS SECTION 083613 - SECTIONAL OVERHEAD DOORS PART 1 GENERAL A. Drawings and general provisions of Contract, including General and Supplementary
More informationSECTION SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationSECTION SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationSECTION SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationSECTION SECTIONAL OVERHEAD DOORS 432 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 432 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationSECTION / STC 52 METAL SOUND CONTROL DOORS
SECTION 08 34 73 / 08 34 73.13 STC 52 METAL SOUND CONTROL DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and general provisions of the Contract, including general and Supplementary Conditions
More informationCOLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100
COLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100 Part 1 General 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified,
More information08620 UNIT SKYLIGHTS Tufflite double polycarbonate glazed Frb
PART 1 GENERAL 1.1 SECTION INCLUDES A. Prefabricated Fixed Skylights. 1.2 RELATED SECTIONS A. Section 07500 - Membrane Roofing. 1.3 REFERENCES A. Aluminum Association (AA): 1. Specifications for Aluminum
More informationDivision 8 Section "Flush Wood Doors" for louvers in wood doors. Division 15 Sections for louvers that are a part of mechanical equipment.
0 0 0 0 0 SECTION 000 - LOUVERS AND VENTS PART GENERAL RELATED DOCUMENTS EASTLAKE FIRE STATION REPLACEMENT HILLSBOROUGH COUNTY CIP # Drawings and general provisions of the Contract, including General and
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationSECTION AWNINGS
SECTION 10 73 13 AWNINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Fixed metal awnings. 1.2 DEFINITIONS A. Awning: An architectural projection that provides weather protection,
More informationSECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND
SECTION 08352 FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND THREE PART SHORT FORM SPECIFICATIONS (CSI) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: manually operated, side folding accordion- type products
More informationA. ASTM A 36 - Standard Specification for Carbon Structural Steel.
Page 1 of 5 SECTION XXXXX INDUSTRIAL VENTILATION LOUVER / DAMPER Part 1. GENERAL 1.1 SECTION INCLUDES A. Top Pivot Louver / Damper B. Bottom Pivot Louver / Damper C. Center Pivot Louver / Damper D. Sliding
More informationB. Shop Drawings: Show fabrication and installation details for roof accessories.
SECTION 077200 - ROOF ACCESSORIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Roof curbs. 2. Equipment supports. 3. Roof hatches. 4. Dropout-type heat and smoke vents. 5. Hatch-type
More informationAMBICO Limited 7\2018 Section and OVERSIZED METAL DOORS AND FRAMES Page 1
Page 1 This section includes Oversize Steel Doors and Frames and relies on the Canadian Steel Door Manufacturers Association (CSDMA.org) industry standard, as well as on the Hollow Metal Manufacturers
More informationDIVISION 10 SPECIALTIES SECTION METAL LOCKERS
DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION SOUND CONTROL DOORS
SECTION 08380 SOUND CONTROL DOORS 1.0 GENERAL 1.1 DESCRIPTION OF WORK A. Furnish and install Sound Control Doors specified herein and per the locations and orientations shown on the Contract Documents.
More informationPIP ARS08111 Standard Steel Doors and Frames Supplier Specification
May 2018 Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationAcoustic Louvers ABSORPTIVE ACOUSTIC LOUVERS
ABSORPTIVE ACOUSTIC LOUVERS Developed to provide a solution to applications that require efficient ventilation without the transfer of undesirable noise, Price use acoustic media to absorb sound energy
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationCOMPLETE REVISION November Process Industry Practices Architectural. PIP ARS08111 Standard Steel Doors and Frames Supplier Specification
November 2012 Process Industry Practices Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationSIMEILINGS TORSION SPRING CEILING SYSTEM SPECIFICATION
TORSION SPRING CEILING SYSTEM SPECIFICATION NOTICE: Consult your local Sound Concepts representative or contact Sound Concepts at 204.783.6297 before specifying any optional or custom element as shape,
More informationSECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationSECTION ROOF MOUNTED ATTIC EXHAUST VENT
SECTION 07 72 00 ROOF MOUNTED ATTIC EXHAUST VENT **This is a CSI Three-Part Specification using CSI MasterFormat 2004-2010 Section Numbers and Titles. This specification must be edited to suit your particular
More informationSoCal Dynamic Dome Skylight SECTION UNIT SKYLIGHTS
VELUX SECTION 08 62 00 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Dynamic dome unit skylight with formed curb counterflashing for mounting on site-built or prefabricated roof curbs, for flat, low-slope and
More informationLTH3700, HOLLOW METAL SLIDING FIRE DOOR
LTH3700, HOLLOW METAL SLIDING FIRE DOOR Consult Manufacturer for additional options or modifications PART 1-GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationCatwalk Curbs. Service Platforms and Catwalks
Service Platforms and Catwalks Combination Catwalk Vibration Isolation Curb 54 years of excellence... www.thybar.com 103 Table of Contents General Information 105 Specifications 106-111 Submittal 112-113
More informationSeries - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationSECTION METAL STUDENT LOCKERS
SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract
More informationSECTION PREHUNG WOOD DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08 14 00 PREHUNG WOOD DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2014-2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. French Doors.
More informationSECTION ACCESS PANELS
SECTION 08310 ACCESS PANELS PART 1: GENERAL 1.01 RELATED DOCUMENTS Drawings and general provisions of the contract, including supplementary conditions and Division 1 specification sections, apply to this
More informationC. Samples: For each door face material, at least 3 by 5 inches (75 by 125 mm) in size, in specified finish.
SECTION 083113 - ACCESS DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION ENTRANCE FLOOR GRILLES SPECIFICATIONS
SECTION 12 48 16 ENTRANCE FLOOR GRILLES SPECIFICATIONS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and
More informationSECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
More informationSECTION MISCELLANEOUS METALS THIS SECTION TO BE INCLUDED IN SUB BID FOR SECTION MISCELLANEOUS AND ORNAMENTAL IRON
SECTION 055000 THIS SECTION TO BE INCLUDED IN SUB BID FOR SECTION 050001 MISCELLANEOUS AND ORNAMENTAL IRON PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a
More informationSECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 8 SECTION 083921 PEDESTRIAN FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your
More informationLouvers and Dampers April Product Guide Specification SECTION SMOKE DAMPERS
Louvers and Dampers April 2008 P.O. Box 606 7435 Industrial Road Florence, Kentucky, 41042 Phone: (859) 647-2299 Fax: (859) 647-7810 Web Site: www.louvers-dampers.com Product Guide Specification SECTION
More informationSECTION AIR OUTLETS AND INLETS
PART 1 - GENERAL 1.1 DESCRIPTION A. Roof Curbs SECTION 23 37 00 AIR OUTLETS AND INLETS SPEC WRITER NOTE: 1. Delete between //----// if not applicable to project. Also delete any other item or paragraph
More informationP R O D U C T - S P E C
P R O D U C T - S P E C Drylight TM Skylight Specification Section 08600 Skylights June 2008 This PRODUCT-SPEC is intended to provide specifiers with guidelines to properly specify Carlisle s Drylight
More informationSECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 8 SECTION 083919 WATERTIGHT DOORS **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your specific project
More informationSTEEL WINDOWS & DOORS SECTION 08510
SWI Steel Window Specifications STEEL WINDOWS & DOORS SECTION 08510 Steel Window Institute, Inc. 1300 Sumner Ave. Cleveland, OH 44115-2851 Phone: 216-241-7333 Fax: 216-241-0105 E-Mail: swi@steelwindows.com
More informationSECTIONAL ALUMINUM DOORS
PART 1 GENERAL 1.1. GENERAL REQUIREMENTS 1.1.1. General Conditions and Division 01 apply to this section. 1.2. RELATED WORK Section 05500: Section 07900: Section 09900: Section 11169: Division 16: Metal
More informationSECTION Motor Operated Horizontal Sliding Sound Control Door
SECTION 08 34 73 Motor Operated Horizontal Sliding Sound Control Door PART 1 GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and general provisions of the Contract, including general and Supplementary Conditions
More informationHOTEL SPECIFICATION SECTION 08100
Part 1 General HOTEL SPECIFICATION SECTION 08100 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified including, but not limited
More informationSECTION RESIDENTIAL OVERHEAD DOORS SIGNATURE COLLECTION WOOD GARAGE DOORS
SECTION 08361 RESIDENTIAL OVERHEAD DOORS SIGNATURE COLLECTION WOOD GARAGE DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES. A.
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationSunWave Smoke Vent. Product Information. Description: Selection Information: Smoke Vents (Acrylic and Polycarbonate): Method of Application: Storage:
Item Description Smoke Vent Product Information Description: Smoke Vents (Acrylic) provide a double glazed, 100% Impact Modified 0.181" (4.6 mm) outer lens and a 50% Impact Modified 0.120" (3 mm) inside
More informationSINGLE SWING DOOR PAIRED SWING DOOR
Rev. 091416 SINGLE SWING DOOR PAIRED SWING DOOR Drawing No.: Revision: Date: If you need to contact Customer Service Please complete the following information and retain for future reference: Serial Number:
More informationSECTION Coiling Counter Shutters
SECTION 083313 Coiling Counter Shutters PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Doors B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening
More informationExpansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationSECTION Coiling Counter Shutters
SECTION 08 3313 Coiling Counter Shutters PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Doors B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening
More informationSECTION METAL ROOF AND SOFFIT PANELS
Metal Panel Systems, Inc. 11506 Reading Road Cincinnati, Ohio 45241-2512 Telephone: 800-554-6126 or 513-554-6120 Fax: 513-554-6121 www.metalpanelsystems.com info@metalpanelsystems.com Specifications for
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationSECTION VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS
SECTION 08211 VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division I Specification
More informationSECTION METAL DOORS & FRAMES
SECTION 08-10-00 METAL DOORS & FRAMES Part 1 General 1.00 Scope of Work: Contractor shall provide labor and materials for a complete steel door install. 1.01 Section Includes A. Steel doors. B. Steel frames
More informationSECTION Coiling Doors and Grilles Model 4320
SECTION Coiling Doors and Grilles Model 4320 PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Grilles B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared
More informationA. This Section includes ceiling- and wall-mounted diffusers, registers, grilles and louvers.
SECTION 23 37 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
More informationSSL-175. Specifications
SSL-175 Specifications Everlast Metals 10 Enterprise Court Lebanon, PA 17042 Phone: (717) 270-6554 Fax: (717) 270-6569 www.everlastmetals.com 7410 Preformed Metal Roofing PART 1: GENERAL 1.01 SECTION INCLUDES
More informationSoundmaster & Modernfold TECHNICAL DATA
This specification along with product information and model details can be downloaded from www.modernfold.com SPECIFICATION - SECTION 08 35 13 ACCORDION FOLDING DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationSeries - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 591 SERIES THERMACORE INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click
More informationHobby Parking Office HOU/ Proj./ No. 738 Houston, Texas 100% Bid and Construction Documents- Addendum #2, January 26, 2017
SECTION 077200 - ROOF ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationARCHED METAL FRAMED SKYLIGHTS EXARC ARCHED GLAZING SYSTEM WITH ACRYLIC & POLYCARBONATE GLAZING
EXARC Skylights, Inc (800) 247-5934 3793-B North Peachtree Road (770) 451-4352 Chamblee, GA 30341 fax(770) 451-4934 EXARC ARCHED GLAZING SYSTEM WITH ACRYLIC & POLYCARBONATE GLAZING PART 1 GENERAL 1.1 RELATED
More information3. Roof Expansion Joints between New Building and Existing Building.
SECTION 077200 - ROOF ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Amendments to General Conditions and Division 01 Specification
More informationExpansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
More informationPIP ARS08710 Standard Steel Door Hardware Supplier Specification
April 2018 Architectural PIP ARS08710 Standard Steel Door Hardware Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationSECTION SECURITY GRILLES 679 SERIES SUPERGARD SIDE FOLDING GRILLE
SECTION 08 33 00 SECURITY GRILLES 679 SERIES SUPERGARD SIDE FOLDING GRILLE Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
More informationA NEW SCHOOL ATHENS BIBLE SCHOOL FOR THE PRESIDENT AND BOARD OF DIRECTORS ATHENS, ALABAMA
McKee and Associates Architecture and Interior Design Addendum No. TWO Date: 09.27.17 Project: A NEW SCHOOL ATHENS BIBLE SCHOOL FOR THE PRESIDENT AND BOARD OF DIRECTORS ATHENS, ALABAMA A2.1 GENERAL PROJECT
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationSECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.
SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling hung compartments.
More informationAMBICO Limited Section BLAST RESISTANT STEEL OVERHEAD DOOR ASSEMBLIES Page 1
Page 1 This section includes Blast Resistant, Steel, Overhead Door Assemblies, with integral electric operators and accessories. This section includes proprietary, descriptive and performance type specification
More informationRytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262)
Rytec Corporation One Cedar Parkway Jackson, WI 53037 1-888-GO-RYTEC (262) 677-9046 WWW.Rytecdoors.com Pharma-Swing Model Number PSW12002 SECTION 08300 HIGH PERFORMANCE FIBERGLASS SWING DOOR PAIR PART
More informationSection Addendum No. 1
Section 00 9113 Addendum No. 1 2018 AERATION OF WWTP EFFLUENT DURAND, MICHIGAN To all prospective bidders and others concerned, YOU ARE HEREBY ADVISED THAT the Contract Documents for the above referenced
More informationSECTION [ ] SECURITY GRILLES. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08333 [08 33 14] SECURITY GRILLES Display hidden notes to specifier. (Don't know how? Click Here) ** NOTE TO SPECIFIER ** Wayne Dalton; Rolling steel door products.. This section is based on the
More informationAMBICO Limited Section and DETENTION STEEL DOOR AND FRAME ASSEMBLIES Page 1
Page 1 This section includes AMBICO Detention Steel Door and Frame assemblies that can be fire rated or non-rated. This section relies on both the Canadian Steel Door Manufacturers Association (CSDMA.org)
More information