The TKI success kit. The excellently thought-out aluminium profi le system for windows, doors and façades.

Size: px

Start display at page:

Download "The TKI success kit. The excellently thought-out aluminium profi le system for windows, doors and façades."

Cora Turner
6 years ago
Views:

Presented by MKF Metallbaukontor Frankfurt GmbH More than 40 years of excellent

1 The TKI success kit The excellently thought-out aluminium profi le system for windows, doors and façades. Presented by MKF Metallbaukontor Frankfurt GmbH More than 40 years of excellent system engineering and buying syndicate. TKI More development expertise through dialogue and synergy. VON METALLBAUERN FÜR METALLBAUER

The TKI module concept - The successful building block to form constructive system solutions. Over 40 years of evolution within modern window, door and façade systems.

2 The TKI module concept - The successful building block to form constructive system solutions. Over 40 years of evolution within modern window, door and façade systems. Almost half a century of experience in the design, development and production of high quality window, door and façade systems for luxury construction and housing projects have produced the outstanding product properties. All certification tests to conform to relevant requirements, being British CWCT, the EN standards or the RAL certification, are carried out at certified institutes such as ift Rosenheim Gmbh, Wintech Engineering, Chiltern Dynamics, etc. The TKI system has achieved outstanding values in all system tests and is a popular choice not only to the experts. This is how it works out Highest quality + Unsurpassed flexibility + Innovative design TKI success kit The ability to have a combination of components, even having different frame depths, makes TKI attractive to both new build and renovation projects. Ultimately the TKI excels not only in quality and flexibility but also in its innovative design. Due to the wide range of profiles offered the architects and developers now have more creative influence in the building design than other systems allow. Tradition meets quality

The innovative system for tomorrow s requirements. - When high values set the standard, this is called TKI. TKI 755 Innovation built-in.

The TKI system therefore excels by means of the best test results in the area s of air permeability, resistance to wind load, water tightness under heavy rain, ease of operation, continuous

This is how it works out: Innovative technology + Highest planning reliability + Maximum design scope TKI success kit Power for innovations By using the TKI systems both window manufacturers and

3 The innovative system for tomorrow s requirements. - When high values set the standard, this is called TKI. TKI 755 Innovation built-in. Innovation by the means of technical know-how is the basis of our method. The TKI system therefore excels by means of the best test results in the area s of air permeability, resistance to wind load, water tightness under heavy rain, ease of operation, continuous operation, burglar protection and acoustics. The experience from the constant close co-operation with architects, planners and contractors is applied to all new and proposed developments. This is how it works out: Innovative technology + Highest planning reliability + Maximum design scope TKI success kit Power for innovations By using the TKI systems both window manufacturers and architects are assured of the highest reliability and maximum freedom. In addition to the ability to combine the various groups within the system, the intelligent design of our products is reflected in many aspects: Variable frame elevation width, numerous fitting options, completely concealed or surface mounted fittings and the suitable design of the operational controls and furniture offer the key to comfortably for fill every project requirement however special it may be. This also includes always being up to date with the latest technology: The automatic control with E-Tec Drive for ventilation, daylight, thermal convection and security systems which are becoming increasingly important within the luxury construction and housing developments. This is therefore a fundamental element of the extensive TKI portfolio.

Photo: Hans Ege, Luzern Energy, Efficiency and Sustainability: Yesterday a Can we -today a We must. Sustainable protection of resources with added value.

Aluminium excels with numerous advantages: Extreme resistance to ultra violet rays and corrosion, high burglar protection and soundproofing as well as a broad

The TKI system is durable, low maintenance and environmentally friendly as aluminium is 100% recyclable without a great deal of energy being used in the process.

They excel in competition with other systems thanks to unrivalled U values.

4 Photo: Hans Ege, Luzern Energy, Efficiency and Sustainability: Yesterday a Can we -today a We must. Sustainable protection of resources with added value. The basic material of the TKI system is aluminium. A modern, dimensionally stable, durable material, which is suitable for every house and every style. Aluminium excels with numerous advantages: Extreme resistance to ultra violet rays and corrosion, high burglar protection and soundproofing as well as a broad spectrum of stylistic designs and colours provide only the start. The TKI system is durable, low maintenance and environmentally friendly as aluminium is 100% recyclable without a great deal of energy being used in the process. The excellent insulation properties of the composite profiles within the TKI window, door and façade systems make an economical solution. They excel in competition with other systems thanks to unrivalled U values. The resulting reduction of the heating requirement decreases both the consumption of energy as well as emissions and costs. TKI 755 Efficiency built-in. This is how it works out: Environmentally compatible materials + Best energy balance + Government sponsoring Responsibility for our environment runs through all TKI products and operational sequences. TKI success kit Efficiency by TKI

Photo: Hans Ege, Luzern The intelligent building block with added value: purchasing advantages included.

This is how it works out: Thousand options + Better installation + Less maintenance TKI success kit TKI is

Difficult requirements and special constructions can also be realised economically and without any problems with

optimum ease of processing early in the design and development.

5 Photo: Hans Ege, Luzern The intelligent building block with added value: purchasing advantages included. TKI saves working capacity, time and nerves. This is how it works out: Thousand options + Better installation + Less maintenance TKI success kit TKI is economical and popular due to the standard profiles offering an unsurpassed number of execution options. Difficult requirements and special constructions can also be realised economically and without any problems with TKI. Added to this is that TKI already saves valuable working time during installation, for attention was paid to optimum ease of processing early in the design and development. Further savings are made once installed, as TKI systems have in the past demonstrated an absolute lack of need for maintenance. What is more, the protection of the capital outlay of the installation begins as early as during the planning. Profitable and long-lasting

Technical details TKI 755 window system Construction Outer frame depth Sash vent depth Deep outer frame depth Deep sash vent depth Frame widths Outer frame widths Sash vent width Transom/mullion

Glazing thickness From 12mm to 65mm Gaskets Centre seal gaskets are a large-volume co-extruded EPDM sealing system in different design variants.

Captive gasket fitted to frames, glazing wedge gasket fitted to complete glazing. Surface Treatment Anodised. Natural or coloured.

Window Design Variants Basic construction: Thermally separated profiles by means of glass fibre reinforced polyamide strips.

6 Technical details TKI 755 window system Construction Outer frame depth Sash vent depth Deep outer frame depth Deep sash vent depth Frame widths Outer frame widths Sash vent width Transom/mullion widths 85mm 75mm 90mm 80mm 50mm to 100mm 45mm to 67mm 75mm to 250mm TKI 755 Innovation built-in. Glazing thickness From 12mm to 65mm Gaskets Centre seal gaskets are a large-volume co-extruded EPDM sealing system in different design variants. The installation can either be via moulded vulcanized corner pieces and straight lengths or a fully moulded frame. Glazing gaskets seal flush with the aluminium profiles. Captive gasket fitted to frames, glazing wedge gasket fitted to complete glazing. Surface Treatment Anodised. Natural or coloured. Powder coating Wet paint coating Dual colour and finishes to inner and outer to the customer s requirements are also possible. Window Design Variants Basic construction: Thermally separated profiles by means of glass fibre reinforced polyamide strips. Slide in insulation to the thermal barrier zone and SEMI-EPDM centre seal gasket. Hi construction: As above but with co-extruded EPDM centre seal gasket. Hi+ construction: As above but with optimised slide in insulation to the thermal barrier zone. Tests CE test: in accordance with EN A1 RAL - GZ 695 Watertightness under heavy rain: in accordance with EN Air permeability: in accordance with EN Resistance to wind load: in accordance with EN Soundproofing: up to SSK 5 as per DIN EN ISO Burglar protection WK 2 in accordance with EN V 1627 Innovation included

Technical details TKI 755 door series Construction Outer frame depth Leaf vent depth 75mm 75mm Frame widths Outer frame width Leaf vent width Transom/mullion widths Cassette transom width 45mm to

Open in and open out doors have internal and external rebate gaskets and a centre seal gasket with warm edge stop in the bottom rail. Glazing gaskets seal flush with the aluminium profiles.

7 Technical details TKI 755 door series Construction Outer frame depth Leaf vent depth 75mm 75mm Frame widths Outer frame width Leaf vent width Transom/mullion widths Cassette transom width 45mm to 75mm 75mm to 100mm 75mm to 250mm 65mm Glazing thickness From 12mm to 65mm Gaskets All gaskets within the door system are made from EPDM. Open in and open out doors have internal and external rebate gaskets and a centre seal gasket with warm edge stop in the bottom rail. Glazing gaskets seal flush with the aluminium profiles. Captive gasket fitted to frames, glazing wedge gasket fitted to complete glazing. Surface Treatment Anodised. Natural or coloured. Powder coating Wet paint coating Dual colour and finishes to inner and outer to the customer s requirements are also possible. Design Variants Basic construction: Thermally separated profiles with glass fibre reinforced polyamide strips, slide in insulation to the thermal barrier zone and internal and external rebate gaskets. Hi construction: As above but with insulation to the glazing rebate. Door Hi+ construction: As above but with optimised slide in insulation to the thermal barrier zone. Advantage through engineering Base point Door Tests CE test: in accordance with EN A1 RAL - GZ 695 Watertightness under heavy rain: in accordance with EN Air permeability: in accordance with EN Resistance to wind load: in accordance with EN Burglar protection WK 3: in accordance with EN V 1627

Technical details TKI 252 Curtain walling façade system. Construction Thermally isolated curtain wall constructed specifically for differing design, production and assembly variations.

8 Technical details TKI 252 Curtain walling façade system. Construction Thermally isolated curtain wall constructed specifically for differing design, production and assembly variations. Thanks to the notching in the mullion, the loads from the transoms diverted directly onto the mullions. Differing transom connections are used in accordance with specific and static requirements. The transoms can be installed on special spring pin connectors after mullion assembly. The profile depth of the transoms is reduced by 1mm to prevent any visible cut surfaces. Gaskets The internal glazing gaskets on both the mullions and transoms are the same depth. Varying spacer profiles and gasket depths can compensate for differing infill thicknesses. The internal gaskets can also be installed as vulcanized frames. The glazing infill are held in place by special stainless steel clips during assembly, as a result there is no need for temporary holding the glazing with short pressure plates, therefore, the final assembly can be carried out directly. Surface treatment Anodised. Natural or coloured. Powder coating Wet paint coating Elevation Width 50mm Profile depth Mullions 52mm to 206mm Transoms 51mm to 205mm Design Variants Basic construction: Plastic spacer between external and internal profiles. Hi construction: As above but with additional insulation to the glazing rebate area. Hi+ construction: As above but with a specially insulated external pressure plate. Thermal Insulation U f value 1.1 W/(m 2 K). Façade post with door element Tests CE test: in accordance with DIN EN Watertightness under heavy rain: in accordance with EN Air permeability: in accordance with EN Resistance to wind load: DIN EN Shock resistance: in accordance with EN General certifications by the building inspectorate of the DIBT (Deutsches Institut für Bautechnik Berlin / German Institute for Construction Technology in Berlin) for transoms and clamping joints. Additional test with increased requirements on the watertightness under heavy rain and wind load in accordance with CWCT (British Standard). Filling thicknesses 4-48 mm Innovation included

Technical details TKI 252 R 2 mullion-transom façade Construction Thermally insulated mullion-transom construction designed for different

For static reasons it is possible to work with mullions of the TKI 252 series.

The drainage and the vapour pressure equalization are carried out via the profilewide sealing system. Gasket All gaskets are made of EPDM.

Surface treatment Anodic oxidation Powder coating Wet paint coating Elevation width 50 mm Thermal insulation U f -values up to 0.

9 Technical details TKI 252 R 2 mullion-transom façade Construction Thermally insulated mullion-transom construction designed for different design variants. The façade is manufactured mainly of transom profiles. For static reasons it is possible to work with mullions of the TKI 252 series. All connecting variants are admitted for use by the building inspectorate. The drainage and the vapour pressure equalization are carried out via the profilewide sealing system. Gasket All gaskets are made of EPDM. Up to a max. of 4 different drainage levels can be realised with the profile-wide sealing system. Surface treatment Anodic oxidation Powder coating Wet paint coating Elevation width 50 mm Thermal insulation U f -values up to 0.8 W/ (m 2 K) Mullion Tests CE test: in accordance with DIN EN Watertightness under heavy rain: in accordance with EN Air permeability: in accordance with EN Resistance to wind load: in accordance with DIN EN Shock resistance: in accordance with EN General certifications by the building inspectorate of the DIBT for transoms and clamping joints Solid and versatile Filling thicknesses 5-54 mm

Technical details TKI 262 mullion-transom façade Construction Thermally insulated mullion-transom construction designed for different production and assembly variations.

10 Technical details TKI 262 mullion-transom façade Construction Thermally insulated mullion-transom construction designed for different production and assembly variations. Thanks to the notching in the mullion the loads of the transoms can be directly diverted. Different transom connectors are used in accordance with static requirements. The transoms can be installed with special spring connectors after assembly of the mullions. The profile depth of the transom is reduced by 1 mm to prevent any visible cut surfaces Gasket In the interior, the glazing gaskets of the mullions and the transoms are on just one level. Spacer profiles and gaskets with varying heights can compensate the differing filling thicknesses. The glazing gaskets can also be used as vulcanized frames. The panes are fixed with special stainless steel clips during the assembly, as a result there is no need to hold the glazing with short pressure plates and the final assembly can be carried out directly. Surface treatment Anodic oxidation Powder coating Wet paint coating Elevation width 60 mm Thermal insulation U f -values up to 1.2 W/ (m 2 K) Tests CE test: in accordance with DIN EN Watertightness under heavy rain: in accordance with EN Air permeability: in accordance with EN Resistance to wind load: DIN EN Shock resistance: in accordance with EN General certifications by the building inspectorate of the DIBT for transoms and clamping joints. Additional test with increased requirements on the watertightness under heavy rain and wind load in accordance with CWCT (British Standard). Mullion Filling thicknesses 4-48 mm Innovation included

Quality from one source Metal workers develop for metal workers Profitability and user-friendliness are our tools for your success.

This concentration of know-how, which commenced in joint purchasing, has in the interaction of more than 40 years of joint experience produced the successful TKI systems.

which has since 2009 also been offering non-affiliated companies price advantages when purchasing their materials.

11 Quality from one source Metal workers develop for metal workers Profitability and user-friendliness are our tools for your success. TKI is being developed by MKF Metallbaukontor Frankfurt GmbH, a free cooperation association, in which more than thirty metal construction companies maintain a constant dialogue. This concentration of know-how, which commenced in joint purchasing, has in the interaction of more than 40 years of joint experience produced the successful TKI systems. This is how it works out: More than 40 years of experience + Practical know-how + Perfect logistics TKI success kit Strength through synergy MKF is a growing association of metal-working concerns, which has since 2009 also been offering non-affiliated companies price advantages when purchasing their materials. Just like the cooperation partners, developers and architects can also rely on constant availability and shortest delivery times due to the outstanding integration. In addition, they can benefit from the service quality and fall back on the consultancy and support expertise of the highly qualified employees as early as during the planning or even during a building project. When metal window manufacturers undertake development work for metal window manufacturers, this results in numerous advantages for the architects and above all for the processing and assembly plant: Because only economical solutions which have been developed from practical experience guarantee the best possible processing and expedient material usage. In this way, TKI saves labour cost and cash and this, what is more, with the highest quality standards.

12 Photo: Hans Ege, Luzern The result is more than the sum of the individual parts. VON METALLBAUERN FÜR METALLBAUER MKF Metallbaukontor Frankfurt GmbH Im Geisbaum 13 D Egelsbach Telephone: +49 (0) 6103 / Faxsimilie: +49 (0) 6103 / info@metallbaukontor.de Website: The TKI succes kit.

Curtain Wall Stick System (Capped)

Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with