Inland Pipe Rehabilitation. August 17 OAWWA Canton, OH
|
|
|
- Daniela Todd
- 6 years ago
- Views:
Transcription
1 Inland Pipe Rehabilitation August 17 OAWWA Canton, OH
2 Presentation Agenda Introduction to IPR IPR Products & Services RS Technik by HammerHead Advanced CIPP Process Spartanburg, SC project review
3 IPR Overview Standard Services Provided: Cured-In-Place Pipe: Standard, Pressure and Potable Pipe Bursting Water Bursting Spiral Wound EcoCast Lining Inspection & Cleaning 24/7 Emergency Response
4 Benefits of Trenchless Solutions Cured In Place Pipe Cured In Place Pipe (CIPP) CIPP is the #1 trenchless technology used in the US for rehabilitation of sewer pipelines Involves inserting a felt tube, saturated with a thermosetting polymer into the damaged pipe. Steam heat is used to expand and cure the tube creating a new, longlasting liner inside the pipe. IPR installs more than 1.5 million LF annually
5 IPR Products & Services RS Technik by HammerHead Advanced CIPP Process: Water & Pressure Pipes Repairs pipes from 6-36 NSF/61 Approved for drinking water Olin epoxy; environmentally safe & Styrene-free
6 IPR Products & Services RS Technik by HammerHead Advanced CIPP Process: Over 20 years experience and 40 million feet installed RS Lining Systems first introduced RS Technik by HammerHead technology to the Americas in In 2011, RS BlueLine product received NSF61 certification for potable water and first installations took place in Canada and the USA. In 2016, HammerHead Trenchless Equipment acquired RS Lining Systems expanding equipment, services and solution offerings for pipe repair and replacement.
7 RS Technik by HammerHead Advanced CIPP Process Quick Look RS Blueline: Application Potable pressure Resin - MaxPox 8D/480D Epoxy Styrene-free Liner - Fiberglass reinforced needle felt tube with polyolefin coating Water or controlled air inversion Pulled in place with controlled air inversion of calibration hose Curing Processes hot water or steam
8 RS Technik by HammerHead Advanced CIPP Process Quick Look RS CityMain: Application Non-Potable pressure Resin - MaxPox 8D/480D Epoxy Styrene-free Liner - Fiberglass reinforced needle felt tube with polyolefin coating Water or controlled air inversion Pulled in place with controlled air inversion of calibration hose Curing Processes Hot water or steam
9 RS Technik by HammerHead Advanced CIPP Process Materials Climate controlled storage and work area Equipment Computer controlled mixing unit with static mixers and fail safe for emergency stop Computer controlled system to regulate resin temperatures. Data Logging Vacuum system for liner impregnation Integrated calibration roller Installation and Maintenance Fully Compliant with ASTM F2994 Engineered processes and procedures
10 RS Technik by HammerHead Advanced CIPP Process Data Logging Logged in short time intervals (typ. 10 secs) Stored on a USB flash drive and backed up on an SD Card Batch files are downloaded and imported into an Excel spreadsheet template for reporting Remote Communications Remote monitoring, programming and troubleshooting by factory technician or contractor s personnel Real Time Data Logging
11 RS Technik by HammerHead Advanced CIPP Process CIPP Pressure Pipe Considerations Pipe diameter and thickness - Operating pressure Site access Existing pipe condition and alignment - Cleaning requirements - Bends, offsets Project scope - Economies of scale Quantity and location of setups Line depth - Access pits
12 RS Technik by HammerHead Advanced CIPP Process CIPP Pressure Pipe Considerations Fittings - End seals - Service connections - Bends, valves, FHs, etc Temporary water service - Above ground temporary pipeline designed for the system capacity and distribution needs. Testing requirements - Hydrostatic testing - ASTM F1216: 1.5 times operating pressure OR operating pressure plus 50 psi (whichever is less) Traffic control
13 RS Technik by HammerHead Advanced CIPP Process Design Considerations Application: potable water and sewer Pipe Type: DI, CI, PCCP, AC, PVC and more Pipe Condition: Access: small pit (5 x5 ) at valves, hydrants, bends Bends: up to 45 degrees Up to 10 deflection Installation lengths: by project, average feet
14 RS Technik by HammerHead Advanced CIPP Process
15 RS Technik by HammerHead Advanced CIPP Process CIPP Standards and Certifications ASTM F Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube ASTM F Standard Practice for the Utilization of Mobile, Automated Cured-In- Place Pipe (CIPP) Impregnation Systems AWWA Manual of Water Supply Practices M28, Rehabilitation of Water Mains NSF/ANSI Standard 61 - Drinking Water System Components Health Effects
16 RS Technik by HammerHead Design Criteria
17 RS Technik by HammerHead Rehab Process Setting temporary bypass and water supply Creating access points to host pipe to facilitate installation of liner, fittings and connections Pipe cleaning and inspection Verification of pipe and liner dimensions Liner impregnation process Post-lining inspection Pressure testing Post-lining cleaning and disinfection Reconnection of services and connections Surface restoration Installation of liner into host pipe
18 RS Technik by HammerHead Advanced CIPP Process Setting Up High Lines
19 Installation RS Technik by HammerHead Advanced CIPP Process
20 RS Technik by HammerHead Advanced CIPP Process Pipe Cleaning and Inspection
21 RS Technik by HammerHead Advanced CIPP Process
22 RS Technik by HammerHead Advanced CIPP Process
23 Installation Methods Air Inversion Water Inversion
24 Pressure Test/Post Lining Cleaning & Disinfection
25 RS Technik by HammerHead Advanced CIPP Process Robotic Service Connection Reinstatement
26 RS Technik by HammerHead Advanced CIPP Process Finishing End Seals: The flanged ends are re-coupled in-line with a new short spool piece of pipe. Pipe Flanges: Prefabricated flange pieces are attached and secured to the host pipe. Liner Installation: The liner(s) are installed and cured. The liner is trimmed back inside the flange pieces.
27 RS Technik by HammerHead Advanced CIPP Process Objectives for Pressure Pipe Rehab Stop water loss / leaks Structurally renew existing pipeline Improve hydraulic characteristics Extend service life of existing pipeline Improve water quality Equipment Process Materials
28 RS Technik by HammerHead Spartanburg, SC Project Details: Heavy traffic area downtown Spartanburg Railroad crossing splits ROW from City and DOT Water main breaks within 12 months made rehab time critical Project must be completed by June Class IV structural liner 10 diameter DIP By-pass and temp water required for fire service & several businesses
29 RS Technik by HammerHead Spartanburg, SC
30 Completed on-time and on budget! Took 5 installations longest 350 ft. Short runs due to DOT and Railroad Line was inverted following ASTM F1216 Cured utilizing ASTM F2994 (~ 6 hours) 6 man crew
31 Passed hydrostatic test with flying colors! No discernible leakage at hydrostatic pressure test: 150psi for 1+ hour No businesses shut down during project By-pass utilized storm sewers, hardly noticeable
32 Bill Jappy IPR Water Pressure Applications Product Manager Thank You
Cured-in-Place Pipe (CIPP) for Pressure Pipe. Presented by: Mike Moore
Cured-in-Place Pipe (CIPP) for Pressure Pipe Presented by: Mike Moore CIPP Proven Technology Introduced over 45 years ago Most used trenchless technology for the rehabilitation of gravity flow pipeline
Fiber Reinforced Cured-in-Place Rehabilitation Under an Interstate
Fiber Reinforced Cured-in-Place Rehabilitation Under an Interstate UCT Conference - February 2017 Presented By Chantal Evans Representing Owner Jonathan Stathis/Cedar City Owner and owner issues Cedar
Mokapu CIPP Case Study & Innovations in Trenchless Technologies for Wastewater System Rehabilitation
Mokapu CIPP Case Study & Innovations in Trenchless Technologies for Wastewater System Rehabilitation Presented by Mike York, Insituform Technologies, Inc. Trenchless v. Dig and Replace What is CIPP? Developed
SPECIFICATIONS FOR PREMIER-PIPE USA CURED-IN-PLACE TECH LINER
SPECIFICATIONS FOR PREMIER-PIPE USA CURED-IN-PLACE TECH LINER 1. General Statement: This specification is for the Cured in Place Pipe process (CIPP) of pipe rehabilitation using a glass fiber reinforced
Pipe User Group. Tuesday March 14, Walnut Creek, CA. Matt Wassam
Pipe User Group Tuesday March 14, 2017 Walnut Creek, CA Matt Wassam 720-333-4500 Agenda AWWA M-28 liner definitions brief overview What information is required to bid a project? Technology Overview Transmission
Product Information. Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube
1468 West Hospital Road Paoli, Indiana 47454 Phone: (812) 723-0244 Fax: (812) 723-0405 Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube Revised November 16, 2016 Company Profile Product Types Resins
SECTION IRRIGATION PIPELINE LINING (CURED-IN-PLACE PIPE)
SECTION 02518 IRRIGATION PIPELINE LINING (CURED-IN-PLACE PIPE) PART 1 GENERAL 1.01 SECTION INCLUDES A. Irrigation pipeline lining, as herein specified, consists of installing pipe liner by trenchless methods
PIPE REHABILITATION. Comply with Division 1 - General Provisions and Covenants, as well as the following:
PIPE REHABILITATION PART 1 - GENERAL 1.01 SECTION INCLUDES A. Sliplining Pipe B. Cured-in-place Pipe Lining C. Deformed/Reformed Pipe Lining D. Folded/Formed Pipe Lining E. Spot Repairs by Pipe Replacement
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-22 05 83.63 (November 2016) -------------------------------- Preparing Activity: NASA UFGS-22 05 83.63 (November 2013) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
Structural Lining of Water Mains. City of St. John s, Water and Wastewater Division
Structural Lining of Water Mains Overview Applications Pre-lining process Installation (Aqua-Pipe Product) Post-lining process Challenges Applications Alternative to water main reconstruction. Limited
Specifying Trenchless Sewer Rehabilitation Projects. Presented by: Todd Stelmacher Visu-Sewer, Inc.
Specifying Trenchless Sewer Rehabilitation Projects Presented by: Todd Stelmacher Visu-Sewer, Inc. Todd Stelmacher Bio Visu-Sewer Sales Engineer MN, ND, SD, WI 30+ years public utilities experience Municipal
The Rehabilitation of Existing Building Drains and Building Sewers by the
Inversion or Pulled-in-Place Method and Curing of Resin-impregnated Tube Page 1 of 7 www.icc-es.org/pmg (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council PROPOSED PMG LISTING
EVALUATION SUBJECT: HAMMERHEAD CURED-IN- PLACE PIPE (CIPP) LINING SYSTEM DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING
ICC-ES Report PMG-1273 Reissued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: HAMMERHEAD CURED-IN- PLACE PIPE (CIPP) LINING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16
EVALUATION SUBJECT: PERMA-LATERAL PULLED- IN-PLACE CURED-IN-PLACE PIPE LINING SYSTEM
ICC-ES Report PMG-1074 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: PERMA-LATERAL PULLED- IN-PLACE CURED-IN-PLACE PIPE LINING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION:
Table 1 Description of Work Pipe Size (mm) 1 Sunshine Way A/C No. A/C Yes
March 2, 2018 To: Cured-In-Place Pipe (CIPP) Relining Contractors RE: CITY OF GRAND FORKS REQUEST FOR QUOTE FOR CIPP RELINING CONTRACTORS 1.0 INTRODUCTION The City of Grand Forks is requesting quotes to
CIPP Cured-in-Place Pipeline CIPP. cured-in-place pipe. trenchless pipe rehabilitation
CIPP Cured-in-Place Pipeline CIPP cured-in-place pipe trenchless pipe rehabilitation MPC ToughTube cured-in-place pipe lives up to its name. The lining process is accomplished by either inverting or pulling
Infrastructure Solutions Pressure Pipe Overview
Infrastructure Solutions 2017 Pressure Pipe Overview Pipe problems Costly repairs & lost revenue Water quality Water main breaks Water loss Leaking pipes Flow capacity Aging pipelines 2 Infrastructure
Fold & Form PVC Liners Sewer & Culvert Rehabilitation
Fold & Form PVC Liners Sewer & Culvert Rehabilitation Presented at NASTT Conference Cooperstown, NY November 16, 2017 Scott Mills, P. Eng. Eastern District Manager - Municipal Systems IPEX USA, LLC Agenda
SPECIFICATIONS. Cured-in-Place Pipe Liner (CIPP Liner). Shall comply with Subsection
PIPELINE SYSTEM REHABILITATION SPECIFICATIONS The intent of the work under this section involves the trenchless rehabilitation of existing sewer pipelines. This lining shall rebuild strength and substantially
Rehabilitation of Forced Sewer Mains with CIPP
Rehabilitation of Forced Sewer Mains with CIPP May 2018 William Wong Presentation outline Introduction to Aegion Case Study Problem InsituMain CIPP Solution Introduction to Aegion Introduction to Aegion
SPECIAL SPECIFICATION 4411 Cured-In-Place Pipe (CIPP) (Drainage Structures)
2004 Specifications CSJ 6165-86-001 SPECIAL SPECIFICATION 4411 Cured-In-Place Pipe (CIPP) (Drainage Structures) 1. Description. Reconstruct existing cross drainage structures by forming a new pipe within
CIPP REFERENCE SPECIFICATION
CIPP REFERENCE SPECIFICATION This CIPP Reference Specification serves as only a guideline and is not intended to encompass the requirements of every municipality or industrial application. However, the
TECHNICAL SPECIFICATIONS FIBERGLASS/ULTRAVIOLET LIGHT CURED-IN-PLACE PIPE (CIPP) FOR MAINLINE RENEWAL
TECHNICAL SPECIFICATIONS FIBERGLASS/ULTRAVIOLET LIGHT CURED-IN-PLACE PIPE (CIPP) FOR MAINLINE RENEWAL PART 1 - PRODUCTS 1.1 GENERAL It is the intent of this specification to provide for the reconstruction
I&I Mitigation: Rehabilitation of Sewer Laterals and Sealing the Collection System
I&I Mitigation: Rehabilitation of Sewer Laterals and Sealing the Collection System Rick Gage, Vice President of Sales Mike Czipar, Vice President of Business Development Discussion Points Mainline CIPP
r.tec GmbH The technology provider of the Rabmer Group
r.tec GmbH The technology provider of the Rabmer Group Know How Technology Quality - Innovation What do we offer? We have developed a technology portfolio from the perspective of a contractor we serve
Installation Practice InnerSeal
Installation Practice InnerSeal Rehabilitation of a Full-Length Sewer Service Lateral using One-Piece Main and Lateral Cured-In-Place Liner Assembly Installed By Means Of Air Inversion 1. Intent This instruction
Michelle D. Beason, PE National Plant Services, Inc.
8th Biennial HWEA Collection System Conference Michelle D. Beason, PE National Plant Services, Inc. Honolulu, HI December 4, 2015 CLEANING INSPECTION REPAIR LARGE AND SMALL DIAMETER PIPE CLEANING ROOT
Service Lateral Rehabilitation Using Cured-In-Place-Pipe (CIPP)
THE TOTAL SOURCE Service Lateral Rehabilitation Using Cured-In-Place-Pipe (CIPP) Brendan Doyle BLD Services, LLC Introduction Intent, to provide information on: Lateral preparation Lateral CCTV Inspection
CIPMH (Cured-in-Place Manhole) Lining System
Product Submittal Document Information CIPMH (Cured-in-Place Manhole) Lining System CIPMH FULL DEPTH-PA For Structural Rehabilitation Updated 9/25/14 Product Submittal Review ITEM 1. Manufacturer Company
PRESSURE PIPE REHABILITATION CIPP TECHNOLOGIES
PRESSURE PIPE REHABILITATION CIPP TECHNOLOGIES SEKISUI SPR s rehabilitation technologies for pressure pipelines SEKISUI SPR is synonymous with the development and implementation of trenchless pipe rehabilitation
CIPP Lateral Renewal Connection System
Product Submittal Document Information CIPP Lateral Renewal Connection System ManEntry Lapel Liner Updated 6/12/14 Product Submittal Review ITEM 1. Manufacturer Company Name: LMK Technologies, LLC Contact
Special Specification SS1- INTERNAL CIPP POINT REPAIR OF PIPELINES. A. General. 1. Scope
Special Specification SS1- INTERNAL CIPP POINT REPAIR OF PIPELINES A. General 1. Scope The work covered in this item includes the labor, equipment, materials for performing all work necessary to rehabilitate
Contractor Cases for Using Temperature Monitoring All Along the Pipeline in CIPP Mid-Sized Pipe Installations. Gary Rapp VP, Operations
Contractor Cases for Using Temperature Monitoring All Along the Pipeline in CIPP Mid-Sized Pipe Installations Gary Rapp VP, Operations Zia Systems LLC Overview Zia Systems, LLC is an international high-tech
SECTION 808 CURED-IN-PLACE-PIPE (CIPP)
SECTION 808 CURED-IN-PLACE-PIPE (CIPP) 808-1 DESCRIPTION: This Work consists of providing labor, materials, equipment, and supervision necessary to accomplish the CIPP lining of all sewer mains designated
OTEC 2017 Spray Applied Pipe Liner Supplemental Specifications 833 Calculations for the Resin Based Liner Presented by Peter Blais, PE
Innovative Solutions through Engineered Products OTEC 2017 Spray Applied Pipe Liner Supplemental Specifications 833 Calculations for the Resin Based Liner Presented by Peter Blais, PE HydraTech Engineered
Rehabilitation of potable water pipes with glass fiber reinforced liners
Rehabilitation of potable water pipes with glass fiber reinforced liners Dr. Nils Füchtjohann Head of Research & Development SAERTEX multicom GmbH SAERTEX : Numbers, Data, Facts The SAERTEX -Group has
SPECIAL SPECIFICATION 4631 Cured-In-Place Pipe (CIPP)
2004 Specifications CSJ 0912-34-171 SPECIAL SPECIFICATION 4631 Cured-In-Place Pipe (CIPP) 1. Description. Reconstruct existing drainage structures by forming a new pipe within an existing deteriorated
STIFPIPE : INTRODUCING A NEW HONEYCOMB-FRP PIPE
STIFPIPE : INTRODUCING A NEW HONEYCOMB-FRP PIPE Mo Ehsani, PhD, PE, SE, F.ASCE President, PipeMedic, LLC and Professor Emeritus of Civil Engineering, University of Arizona, 2055 E. 17 th St.,Tucson, AZ
Proper Planning & Analysis Results in a Focused, Cost Effective Pipeline Rehab Project Andrew Costa
Proper Planning & Analysis Results in a Focused, Cost Effective Pipeline Rehab Project Andrew Costa Vice President of Sales, East Region Aegion Corporation WHAT TO EXPECT Front End Planning & Early Stage
CEDAR RAPIDS METROPOLITAN AREA STANDARD SPECIFICATIONS FOR PUBLIC IMPROVEMENTS May 2014 SECTION SEWER LINERS
SECTION 02310 SEWER LINERS PART 1 GENERAL 1.01 - References A. American Society for Testing and Materials (ASTM): 1. ASTM D638 Test method for tensile properties of plastics. 2. ASTM D790 Test method for
PIPE BURSTING GRAVITY SEWER MAINS WITH HDPE PIPE
PIPE BURSTING GRAVITY SEWER MAINS WITH HDPE PIPE SUGGESTED STANDARD SPECIFICATION January, 2012 Prepared by International Pipe Bursting Association Thanks to the following participants for the development
Sample Bid Specification Revision 2 PVC Expanded-in-Place Pipeline Reconstruction
Sample Bid Specification Revision 2 PVC Expanded-in-Place Pipeline Reconstruction 1.00 DESCRIPTION 1.01 WORK INCLUDED: This work shall include the furnishing of all labor, equipment and materials necessary
STANDARD SPECIFICATIONS FOR CONSTRUCTING SANITARY SEWER FACILITIES DIVISION III - CONSTRUCTION SPECIFICATIONS
STANDARD SPECIFICATIONS FOR CONSTRUCTING SANITARY SEWER FACILITIES DIVISION III - CONSTRUCTION SPECIFICATIONS SECTION 5 REHABILITATION OF SANITARY SEWER MAINS BY THE CURED-IN-PLACE PIPE (CIPP) METHOD 5.01
Trenchless Technology
Trenchless Technology UNIVERSAL NEED FOR REHABILITATION Rising Community Expectations Rising Environmental Expectations Diminishing Financial Resources Aging Infrastructure Rising Risk Management & External
BMEC AUTHORIZATION:
777 Bay Street, 2 nd Floor Toronto, Ontario, M5G 2E5 777, rue Bay, 2 e etage Toronto, Ontario, M5G 2E5 T: F: W: 416 585 4234 416 585 7531 www.ontario.ca/buildingcode/ T: TC: W: 416 585 4234 416 585 7531
ITEM NO SLIPLINING SANITARY SEWERS
ITEM NO. 1100 SLIPLINING SANITARY SEWERS 1100.1 DESCRIPTION: Sliplining is accomplished by pulling or pushing liner pipe into existing sewers by use of mechanical or hydraulic equipment. Once in place,
Service Lateral Rehabilitation
THE TOTAL SOURCE Service Lateral Rehabilitation Jacob Trapani BLD Services, LLC Introduction Intent, to provide information on: Lateral rehabilitation Sealing options Studies have shown that 40% to 70%
Pipeline Rehabilitation
Pipeline Rehabilitation Profile The Velosi Group was formed in 1982 and has grown to become one of the world s most trusted specialists in Asset Integrity and HSE Solutions providing a comprehensive range
SEwEr rehabilitation Spr technologies
SEwer rehabilitation spr technologies SEKISUI SPR s rehabilitation technologies FOR SEWER REHABILITATION SEKISUI SPR is synonymous with the development and implementation of trenchless pipe rehabilitation
SPECIAL SPECIFICATION 5256 Cured-In-Place Pipe (Sanitary Sewer)
2004 Specifications CSJ 0912-71-657 SPECIAL SPECIFICATION 5256 Cured-In-Place Pipe (Sanitary Sewer) 1. Description. Furnish and install cured-in-place pipe. A. Resin-impregnated flexible tubes inserted
TECHNICAL SPECIFICATION FOR CURED-IN-PLACE MANHOLE REHABILITATION LINER SYSTEM
TECHNICAL SPECIFICATION FOR CURED-IN-PLACE SYSTEM PART 1 GENERAL 1.01 SCOPE OF WORK Furnish all materials, labor, equipment, tools and required incidentals for providing and installing a resin impregnated
TRENCHLESS WATER MAIN REHABILITATION DESIGN CONSIDERATIONS. V. Firat Sever PE, PhD Project Manager and Senior Engineer. August 28, 2014 Columbus, Ohio
TRENCHLESS WATER MAIN REHABILITATION DESIGN CONSIDERATIONS V. Firat Sever PE, PhD Project Manager and Senior Engineer August 28, 2014 Columbus, Ohio Water Main Investment Needs Source: AWWA Buried No Longer:
Todd Eising, PE, Utilities Section Manager Environmental & Water Resources Department, City of Folsom
Todd Eising, PE, Utilities Section Manager Environmental & Water Resources Department, City of Folsom Sean Maguire, PE, Project Manager Kennedy/Jenks Consultants Cindy Preuss, PE, Senior Project Manager
Lessons Learned from a 60 CIPP Storm Sewer Liner Installation. Robert Stolt, PE Christopher Beranek, PE
Lessons Learned from a 60 CIPP Storm Sewer Liner Installation Robert Stolt, PE Christopher Beranek, PE Presentation Outline 1. CIPP Project Scope 2. CIPP Liner Installation 3. Defects Identified 4. Warranty
Infrastructure Point Repair System Technical Specifications
4301 A 34 t h Street North St. Petersburg, FL 33714 PH: 877-327-4216 Fax: 727-327- 4118 Web: www.irsi.net Infrastructure Point Repair System 1. Scope: This specification defines the approved methodology
Cured-In-Place-Pipe (CIPP) LATERAL SEALS
Cured-In-Place-Pipe (CIPP) LATERAL SEALS PERFORMANCE SPECIFICATION GUIDELINE October, 2016 Thanks to the following participants for the development of this document: Brendan Doyle BLD Services LLC (Chair)
CONSTRUCTION PRODUCT MARKETING
CONSTRUCTION PRODUCT MARKETING You Have Infrastructure Needs. We Have Infrastructure Solutions. OVERVIEW Construction Product Marketing, LLC, offers a unique combination of Product Knowledge, Engineering
Project Specifications
Project Specifications 2016 Work Description - Root remove, clean via hydro-jetting, perform pre-televising and install Cured In Place Pipe liner (CIPP) utilizing either an inverted or pulled in place
ENGINEERING DESIGN GUIDE FOR REHABILITATION WITH CURED-IN-PLACE PIPE Second Edition
ENGINEERING DESIGN GUIDE FOR REHABILITATION WITH CURED-IN-PLACE PIPE Second Edition Lanzo Company History Lanzo has been a leading competitor in the construction industry for over 45 years. Lanzo was founded
FUSIBLE PVC PIPE SYSTEMS Fusible C-900 Fusible C-905 FPVC
Fusible C-900 Fusible C-905 FPVC Installations Trenchless Horizontal directional drilling Sliplining Pipe bursting Jack-and-bore carrier pipe Open-Cut Applications Features and Benefits Gasketless, leak-free,
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
Method One: Liner/Bladder Assembly-Inversion Method.
CIPP Sectional/Point Repairs Critical Factors Finally Explained By: Shaun M. Flanery Abstract A 1999 report from the American Society of Civil Engineers indicated at that time that the nation s 500,000
GENERAL SPECIFICATION FOR THE REHABILITATION OF SEWERS
AM-LINER II PATENTED GENERAL SPECIFICATION FOR THE REHABILITATION OF SEWERS USING THE AM-LINER II PATENTED (PVC)PIPELINING SYSTEM TRENCHLESS TECHNOLOGY August 16, 2005 1 AMERICAN PIPE & PLASTICS, INC.
SECTION 809 CURED-IN-PLACE PIPE (CIPP) LATERALS
SECTION 809 CURED-IN-PLACE PIPE (CIPP) LATERALS 809-1 DESCRIPTION: This Work consists of installing a cured-in-place pipe (CIPP) liner to stabilize structural defects and construction inadequacies in sanitary
Rowlett Cottonwood Transfer Sewer: 60" RCP Sanitary Sewer Rehabilitation Project. TACWA Meeting
Rowlett Cottonwood Transfer Sewer: 60" RCP Sanitary Sewer Rehabilitation Project TACWA Meeting September 25, 2009 North Texas Municipal Water District Project Background 1. Rowlett-Cottonwood Transfer
TRANSPORTATION RESEARCH BOARD. The Renewal of Stormwater Systems Using Trenchless Technologies. Wednesday, March 6, :00-3:30 PM ET
TRANSPORTATION RESEARCH BOARD The Renewal of Stormwater Systems Using Trenchless Technologies Wednesday, March 6, 2019 2:00-3:30 PM ET The Transportation Research Board has met the standards and requirements
INTERFIT LATERAL SEALING SYSTEM INSTALLATION GUIDELINE SPECIFICATION
INTERFIT LATERAL SEALING SYSTEM INSTALLATION GUIDELINE SPECIFICATION INTERFIT LATERAL SEALING SYSTEM SECTION 1: GENERAL 1.1 INTENT 1.2 SCOPE 1.3 REFERENCE DOCUMENTS AND STANDARDS 1.4 SUBMITTALS SECTION
17/03/2017. Contents. Solutions. Customer s Needs. How Trenchless Rehabilitation Depends on Effective Condition Assessment. Performance.
Contents How Trenchless Rehabilitation Depends on Effective Condition Assessment 1. Range of Trenchless Rehabilitation Technologies 2. Need Engineering Methodology to ensure effective and economic application
CONSTRUCTION PRODUCT MARKETING
CONSTRUCTION PRODUCT MARKETING You Have Infrastructure Needs. We Have Infrastructure Solutions. OVERVIEW Construction Product Marketing, LLC, offers a unique combination of Product Knowledge, Engineering
Lateral Connection Rehabilitation
TRELLEBORG PIPE SEALS Lateral Connection Rehabilitation WITH THE MAIN-TO-HOUSE SEWER LINING METHOD epros DrainMtH Introducin Trellebor Part of the wider Trelleborg Industrial Solutions Business Area of
INLINER LAY_InLiner Brochure_FA_ indd 1
INLINER LAY_InLiner Brochure_FA_010913.indd 1 Layne Inliner, LLC is the second largest cured-in-place pipe (CIPP) lining company in the United States. We began as the first U.S. licensee of the Inliner
Styrene Free Structural Liner for Sewers and Culverts
Styrene Free Structural Liner for Sewers and Culverts INTRODUCING NOVAFORM PVC LINER FOR SEWER AND CULVERT REHABILITATION 6 to 30 diameters (150mm to 750mm) Factory-made, quality-controlled and tested
DISPUTING THE MYTH OF INFLOW AND INFILTRATION REMOVAL EFFICIENCY
North American Society for Trenchless Technology (NASTT) NO-DIG 2005 Orlando, Florida April 24-27, 2005 DISPUTING THE MYTH OF INFLOW AND INFILTRATION REMOVAL EFFICIENCY Keith Cheek, Manager of Water Distribution
A COMPREHENSIVE UNDERSTANDING
A COMPREHENSIVE UNDERSTANDING of ASTM F2561-11 The Standard Practice for Rehabilitation of a Sewer Service Lateral and its Connection to the Main Using a One-Piece Main and Lateral Cured-in- Place Liner.
Structural Testing of Geopolymer Pipe & Culvert Mortar Lining System
Structural Testing of Geopolymer Pipe & Culvert Mortar Lining System David Keaffaber, P.E. Midwest Region Manager Joseph Royer, PhD Dan Koo, P.E., PhD Milliken Infrastructure Solutions, LLC Development
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION POLYETHYLENE PRESSURE PIPE
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 11 13.24 POLYETHYLENE PRESSURE PIPE PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specification... 2 1.3
ICC-ES Report. PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EPIPE EPOXY LINED PIPING SYSTEM ACE DURAFLO SYSTEMS, LLC
ICC-ES Report PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: EPIPE EPOXY LINED PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING
Lateral Thinking The Key To Meeting Sewer Infiltration Reduction Targets & Lowering Operating Costs
Lateral Thinking The Key To Meeting Sewer Infiltration Reduction Targets & Lowering Operating Costs John Monro Interflow Pty Limited Keywords: house service line, lateral, infiltration reduction, rehabilitation,
Trenchless rehabilitation of water mains using the Primus Line system
Andreas Gross M.Sc., Head of International Business Development andreas.gross@primusline.com +49-9971-4003-240 Trenchless rehabilitation of water mains using the Primus Line system Company Introduction
Fully Structural Renewal of 39-inch PCCP Water Transmission Main with Swagelining and HDPE
Caribbean Water & Wastewater Conference 2015 Topic: Water & Wastewater Pipeline Rehabilitation, Trenchless Technology Fully Structural Renewal of 39-inch PCCP Water Transmission Main with Swagelining and
Pipe-Bursting Success with AC Pipe
Texas Municipal Utilities Association Annual Conference Inn on Barons Creek January 26, 2012 Pipe-Bursting Success with AC Pipe Pre-chlorinated Pipe Bursting to Replace Potable Waterlines in Round Rock,
SECTION 063 SPECIFICATIONS - CURED-IN-PLACE PIPE
SECTION 063 SPECIFICATIONS - CURED-IN-PLACE PIPE Cured-in-place pipe (CIPP) construction shall be completed within sewers by either inverting and curing thermosetting, resin-impregnated, flexible, tubes
ESTABLISHING OBJECTIVE TEST PROTOCOLS FOR THE QUANTIFICATION OF WATER-TIGHTNESS OF A REHABILITATED MAIN/LATERAL SEWER CONNECTION
North American Society for Trenchless Technology (NASTT) No-Dig Show 2011 Washington, D.C. March 27-31, 2011 Paper E-5-03 ESTABLISHING OBJECTIVE TEST PROTOCOLS FOR THE QUANTIFICATION OF WATER-TIGHTNESS
LARGE DIAMETER HDPE SLIPLINING WHERE EXPERIENCE MATTERS
LARGE DIAMETER HDPE SLIPLINING WHERE EXPERIENCE MATTERS Luis Aguiar Assistant Director Water Operations, Miami-Dade Water and Sewer Department Rafael Ortega President, Aurora Technical Services, LLC Robert
Model Specifications for Sclairpipe High Density Polyethylene (HDPE) Pipe
This publication is intended for use as a guide to support the designer of piping systems. The recipient is encouraged to independently verify all information and agrees that such information is not to
Swagelining for Water Transmission & Sewer Force Main Renewal 16 through 65.
Swagelining for Water Transmission & Sewer Force Main Renewal 16 through 65 www.murphypipelines.com Murphy Pipelines Services For 2 through 65 Water & Force Main Replacement Trenchless Design Design Build
Preparing Your Agency for an Electro Scan Water CIPP Certification Field Demonstration
Preparing Your Agency for an Electro Scan Water CIPP Certification Field Demonstration January 2016 Water Lining Defects Are Typically Missed by CCTV. Electro Scan Is Now Being Recommended For CIPP Lining
MICROBAC LABORATORIES, INC BOULDER DIVISION 4750 Nautilus Court South, Unit A Boulder, CO Whitney Griebel Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROBAC LABORATORIES, INC BOULDER DIVISION 4750 Nautilus Court South, Unit A Boulder, CO 80301 Whitney Griebel Phone: 720 406 4800 MECHANICAL Valid To: June
ULTRAVIOLET LIGHT CIPP LINING OF EXISTING SEWERS
PART 1 GENERAL 1.01 DESCRIPTION A. SCOPE ULTRAVIOLET LIGHT CIPP LINING OF EXISTING SEWERS This contract covers the rehabilitation of severely deteriorated existing sanitary and combined sewers by lining
CURED-IN-PLACE PIPE LINING
CURED-IN-PLACE PIPE LINING PROJECT DESCRIPTION (I) Scope of Work Sewer Repairs Contract for Inspection and In-Place Sewer System Rehabilitation consisting of Cured-in-Place Pipe Lining. General Requirements
GENERAL SPECIFICATION FOR THE REHABILITATION OF SEWERS USING THE THERMOFORM (PVC) PIPE LINING SYSTEM
1. GENERAL 1.01 DESCRIPTION GENERAL SPECIFICATION FOR THE REHABILITATION OF SEWERS USING THE THERMOFORM (PVC) PIPE LINING SYSTEM A. The Contractor shall furnish all labor, equipment and materials necessary
A. ASTM F Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems.
SECTION 221114 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the water distribution piping system, including potable cold, hot and hot water piping including associated fittings, and specialities
Innovative Joint Proves Successful in Critical Slipline Project
644 Innovative Joint Proves Successful in Critical Slipline Project Tom Baas 1, Jeff Gardner 2, Richard Mielke 3 ABSTRACT Ever-tightening budgets are forcing water system owners to rehabilitate their major
Building the City of West Palm Beach s Stormwater Infrastructure Rehab Program June 15, 2018
Building the City of West Palm Beach s Stormwater Infrastructure Rehab Program June 15, 2018 2018 HDR, Inc., all rights reserved. Data Evaluation and Literature Review Presentation Outline Condition Assessment
Technical Information: Standard Inverted and Pull-In CIPP
17988 Edison Avenue Saint Louis, Missouri 63005 Phone: 636-530-8000 www.aegion.com 1. The CIPP Technical Envelope Technical Information: Standard Inverted and Pull-In CIPP Water Inversion Steam Inversion
Overview of Lateral and Main/Lateral Connection Lining and Sealing Technologies
Overview of Lateral and Main/Lateral Connection Lining and Sealing Technologies Prepared by the NASSCO Lateral Committee 11/14/12 0 P a g e TABLE OF CONTENTS 1.0 INTRODUCTION PAGE 3 2.0 REHABILITATION
Overview of Lateral and Main/Lateral Connection Lining and Sealing Technologies
Overview of Lateral and Main/Lateral Connection Lining and Sealing Technologies Prepared by the NASSCO Lateral Committee 08/12/14 0 P a g e TABLE OF CONTENTS 1.0 INTRODUCTION PAGE 3 2.0 REHABILITATION
I&I Mitigation: Reconstruction of Sewer Laterals and Sealing the Connections to the Main Rick Gage
I&I Mitigation: Reconstruction of Sewer Laterals and Sealing the Connections to the Main Rick Gage Vice President, Business Development LMK TECHNOLOGIES 1 Discussion Points System Rehabilitation Overview
CITY OF ODESSA SPECIAL SPECIFICATIONS ITEM 1000 GLASS-FIBER REINFORCED POLYESTER (FRP) REHAB/REPLACEMENT MANHOLE
CITY OF ODESSA SPECIAL SPECIFICATIONS ITEM 1000 GLASS-FIBER REINFORCED POLYESTER (FRP) REHAB/REPLACEMENT MANHOLE 1000.1 DESCRIPTION These specifications shall govern the furnishing of glass-fiber reinforced