SPECIFICATION GUIDE SLIDING CLOSET DOOR PART 1 - PRODUCT
|
|
|
- Ross Turner
- 6 years ago
- Views:
Transcription
1 SPECIFICATION GUIDE SLIDING CLOSET DOOR INTERIOR SLIDING GLASS DOOR PART 1 - PRODUCT 1.1 MANUFACTURER A. COXUSA 4755 E. Zinfandel Court, Suite D Ontario, California eddie.coxusa@icloud.com 1.2 COMPONENTS A. Framing, General 1. Material: Aluminum extrusions, 6063-T5 alloy. 2. Finish a. Anodized Aluminum: [Satin Aluminum.] b. Wet Paint: [Black.] [White.] [Java.] B. Top Channels Height: 2-1/8. Width: [Single: 1-5/8.] [Double: 3-3/16.] [Triple: 4-3/4.] [Quad: 6-7/16.] Maximum Length: 291 with number of tracks required for door operation. 1
2 2. Installation a. [Mounted under a header.] b. [Mounted to a ceiling.] 3. Channels: [Single.] [Double.] [Triple.] [Quad.] One-piece track with number of channels required for door operation. 4. Finish a. Anodized Aluminum: [Satin Aluminum.] b. Wet Paint: [Black.] [White.] [Java.] C. Bottom Tracks 1. Standard. [Single.] [Double.] [Triple.] [Quad.] Height: 3/8 Width: [Single: 1-3/4.] [Double: 2-9/16.] [Triple: 4-1/8.] [Quad: 6-3/16.] Maximum length: [Single: 291.] [Double: 216.] [Triple: 288.] [Quad: 288.] 2. ADA Compliant. [Double.] [Triple.] [Quad.] Height: 3/8. Width: [Double: 3.] [Triple: 4-9/16.] [Quad: 6-1/8.] Maximum length: [Double: 216.] [Triple: 288.] [Quad: 288.] 3. Finish a. Anodized Aluminum: [Satin Aluminum.] b. Wet Paint: [Black.] [White.] [Java.] 2
3 D. Doors 1. Stiles and Rails a. Vertical stiles Material: 17 gauge aluminum, 6063-T5 alloy Height: 1-1/2 Width: 1-5/16 Maximum length: 193 b. Horizontal rails Height: 1-5/8 Width: 1-5/16 Maximum Length: 143 c. Maximum panel weight: 200 lbs. 2. Mullions a. H-Bar: Glazed-in aluminum bars. [1.5 inch] sight line. b. Plant-On Strips: [1 inch] sight line. 1. [Single-Sided] décor strips with adhesive backing. 2. [Double-Sided] décor strips with adhesive backing. C. Glass 1. Monolithic Glass: 3mm thick with safety film backing. a. Back-Painted: [White.] [Black.] 2. Laminated Glass a. [White] laminated glass, 6mm thick with opaque interlayer. 3. Mirror: Mirror with safety film backing. 4. Monolithic Tempered Glass: [3mm - 6mm] a. Tempered glass with glazing patterns [acid etched.] [frosted.] [linen.] 3
4 1.3 HARDWARE A. Taped-On Handle Dimensions: 1 x 3 B. Latches and Pulls [Privacy.] [Passage.] 1. Over Glass Latch (H-479) Material: Polycarbonate with monofilament line. Dimensions: 7/8 x 2-3/4 2. Recessed Pocket Door Edge Pull (H-485) Material: Polycarbonate housing with Zinc AG40A lever pull. Dimensions: 3/4 x 2-5/8 3. In-Stile Latch (H-481) Material: Polycarbonate with monofilament line. Dimensions: 1-1/8 x 3 4. Recessed Stile Pull (H-514) Material: Polycarbonate. Dimensions: 7/8 x 2-5/8 C. Twin Wheel Top Guide Material: Rubber over-molded steel bearings attached to a 16-gauge galvanized steel using steel rivets. B. Bottom Rollers Material: 1. Housing: Acetal with 15% glass fill. 2. Wheel: Steel ball bearing over molded with Acetal. Adjustment: Internal gear used for height adjustments. Maximum height adjustment: 7/8. D. Fixed Panel Stop Material: Polycarbonate. Dimensions: 4 x 1-11/16 x 1-7/16. 4
5 1.4 FABRICATION AND ASSEMBLY A. Door Design 1. 2-Lite: Divided horizontally into 2 lights Lite: Divided horizontally into 3 lights Lite: Divided horizontally into 4 lights Lite: Divided horizontally into 5 lights. B. Shop Assembly Fabricate frame components and doors to finished sizes in shop except provide field splicing at locations indicated in shop drawings to accommodate handling and access limitations. 1.5 ACCESSORIES a. Bumper /Screw Head Cover b. Glazing Vinyl PART 2 - EXECUTION 2.1 EXAMINATION Verify that openings and substrates are acceptable for installation of work on this section. 2.2 INSTALLATION Install systems according to shop drawings and manufacturer s installation instructions. 2.3 ADJUSTING, CLEANING AND PROTECTION a. Adjust doors for smooth operation b. Comply with manufacturer s written recommendations for cleaning and maintenance. 5
6 c. Clean aluminum and glass surfaces immediately after installing sliding doors. d. Protect surfaces from impact and from contact with contaminating substances resulting from other construction operations. e. Clean immediately before substantial completion. 2.4 CLOSEOUT REQUIREMENTS Deliver executed Warranty. END OF SECTION 6
ACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
Paired panel system Acoustically rated glass wall system Automatic seal system Hinged together in groups of two, facilitating quick, easy setup Each panel is supported by a single carrier Ideal for straight-line
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
SPECIFICATION - SECTION (10650) OPERABLE PARTITIONS
Acousti-Clear Automatic Seal Paired Panel 10 22 26 (10650) Operable Partitions SPECIFICATION - SECTION 10 22 26 (10650) OPERABLE PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general
SECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
SECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND
SECTION 08352 FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND THREE PART SHORT FORM SPECIFICATIONS (CSI) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: manually operated, side folding accordion- type products
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
SECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
SECTION DEMOUNTABLE WALLS SKY WALLS - STRATUS SYSTEM
1 SECTION 10.22.19 DEMOUNTABLE WALLS SKY WALLS - STRATUS SYSTEM PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Full height center-glazed, butt-jointed partition system. 2. Full height doors.
GLASS DOORS > Sliding
GLASS DOORS GLASS DOORS > Sliding 2018 CARVART INFO@ 212.675.0030 2 GLASS DOORS > SLIDING TOP HUNG TOP HUNG FLOOR MOUNTED SLIDING > FRAMELESS BARNDOOR > FRAMELESS SCREENS > SLIDING FRAMED SINGLE TOP HUNG
SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS
PRODUCT SPECIFICATION SERIES 1080/1180 PART 1 - GENERAL 1.01 Work Included SECTION 10170 SOLID PHENOLIC PLASTIC TOILET PARTITIONS A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Page 1 PRODUCT DESCRIPTION SECTION SECTIONAL OVERHEAD DOORS MODEL 900 PRODUCT FEATURES
2016-03-24 Page 1 SECTION 08360 SECTIONAL OVERHEAD DOORS DESCRIPTION MODEL 900 PRODUCT FEATURES Sectional steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional
SECTION TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS. A. Solid composite phenolic toilet compartments and urinal screens.
SECTION 102113 TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Solid composite phenolic toilet compartments and urinal screens. 1.02 RELATED SECTIONS
SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
SECTION SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift & Slide Door Systems
SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
GLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA2 Ultra Acoustical, STC 45/46 Paired, Glass Wall PRODUCT OVERVIEW: Top Supported Center Stack Paired s Manually Operated Maximum Opening Height: 12' 2 [3.7m] Maximum
SECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware.
1 SECTION 08 4210 ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1. Lock cylinders
SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
SOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
800 Series Aluminum Overhead Doors, by Northwest Door Section ALUMINUM SECTIONAL DOORS Digicon Information Inc.
Digicon Information Inc. Page 1 This section includes Model 800 aluminum insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our without windows.
Genius Movable Walls. October 2012
S t a n d a r d Pr o d u c t S t a t e m e n t o f L i n e Genius Movable Walls October 2012 2 Genius Movable Wall Table of Contents Doors & Openings A. Technical Specifications Pivot Door Specifications
Model STORM GRILLE Brick or Straight Pattern High Stress Rolling Grilles
Model STORM GRILLE Brick or Straight Pattern High Stress Rolling Grilles NOTE: For specifications, architects must choose from a variety of options. The standard choice will be shown first in plain text
SECTION PASS WINDOWS. 1.1 SUMMARY A. Section Includes: 1. Factory finished sliding glass, counter mounted pass windows.
SECTION 08 56 19 PASS WINDOWS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Factory finished
GLASS DOORS. GLASS DOORS > Telescopic
GLASS DOORS C A R VA R T. C O M GLASS DOORS > Telescopic 2 0 1 8 C A R VA R T I N F O @ C A R V A R T. C O M 212.675.0030 2 GLASS DOORS > TELESCOPIC Frameless Framed > Single Framed > Double 3 GLASS DOORS
Doc
ANC-45 ACCORDION DOOR ACCORDION FOLDING PARTITIONS, WALLS OR DOORS GENERAL NOTES TO SPECIFIER: This specification section has been prepared to assist design professionals in the preparation of project
Technical Data Sheet Signature 842
Technical Data Sheet Signature 842 Signature 800 Series Features & Options Standard Features Manually-operated paired-panel movable partition STC 43 or 47 with gypsum board faces STC 49, 52, 53, or 55
Series - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947
WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947 WEATHER BREAKER MODEL 175 Whether you are keeping the cold out or in, nothing makes better sense for your manufacturing facility or warehouse
MARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
A. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
1. Division 01: Administrative, procedural, and temporary work requirements.
SECTION 10 2219 DEMOUNTABLE PARTITIONS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Demountable partition system. 2. Doors. 3. Glazed panels. B. Related Sections: 1. Division 01: Administrative,
Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
2013-05-09 Page 1 PRODUCT FEATURES DESCRIPTION Sectional insulated steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional overhead doors. PRODUCT ATTRIBUTES
Product Guide Specification
February 2015 528 Pioneer Parkway Clare, Michigan 48617 Toll Free 800-631-0212 Website www.tranquilsystems.com E-mail sales@tranquilsystems.com Product Guide Specification Tranquil Acoustic Walls with
MOVEABLE GLASS WALL TECHNICAL DATA
Modernfold Compactline Technical Data Ideal for applications requiring space division, visibility, and security. Used in banks, office lobbies, conference areas, interior storefronts, and arena skyboxes.
The S.15 ALL WOOD WITH ALUMINUM CORE LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.15 ALL WOOD WITH ALUMINUM CORE LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift &
Note: Any verbiage written in red needs to be specified. All other options should be deleted
Note: Any verbiage written in red needs to be specified. All other options should be deleted KYLER SCREENLINE BLIND SPECIFICATION PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
SECTION ACCORDION FOLDING PARTITIONS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
Series x Thermal Triple Set Storefront Framing
Series 433 2 x 4 1 2 Thermal Triple Set Storefront Framing CONFIGURATIONS Screw Spline Shear Block System 433 is a thermally broken storefront framing system. Glass planes can be placed in an outside set,
Product Guide Specification
Digger Specialties, Inc. May 2012 PO Box 241 Bremen, Indiana 46506 Toll Free (800) 446-7659 Phone (574) 546-5999 Fax (574) 546-5099 Web Site www.diggerspecialties.com E-mail info@diggerspecialties.com
SECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 51 69.11 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
DIVISION: SPECIALTIES SECTION: DEMOUNTABLE PARTITIONS REPORT HOLDER: KRUEGER INTERNATIONAL, INC.
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3505 Issued 04/2017 This report is subject to renewal 04/2018. DIVISION: 10 00 00 SPECIALTIES
SECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
Series x Thermal Triple Set Storefront Framing
Windows Curtain Walls Entrances Storefronts Series 433 2 x 4 1 2 Thermal Triple Set Storefront Framing Configurations Screw Spline Shear Block System 433 is a thermally broken storefront framing system.
Guide Specifications - Section SL35. NanaWall SL35, Aluminum Framed Folding System PART 1 - GENERAL
NanaWall SL35, Aluminum Framed Folding System PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: Engineered sliding/folding aluminum and glass door system, including aluminum frame, threshold, panels,
Series 3500 Thermal Series 3900 Fixed Thermal Architectural Grade Horizontal Sliding Window
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE Series 3500 Thermal Series 3900 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX
SECTION U.S. ALUMINUM SERIES BAL-350 HURRICANE RESISTANT BALCONY/TERRACE DOOR
Page 1 of 6 SECTION 08 39 80 U.S. ALUMINUM SERIES BAL-350 HURRICANE RESISTANT BALCONY/TERRACE DOOR U.S. Aluminum has designed one of the most demanding air and water protection products, the BAL- 350 Small
DIVISION 10 SPECIALTIES SECTION METAL LOCKERS
DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
glassbarndoor > Frameless
GLASS DOORS > SLIDING glassbarndoor > Frameless 28 CARVART INFO@ 212.675.00 2 CARVART s glassdoor offering includes a broad range of design options to choose from. By combining glass (colors and finishes),
Sliding Door Systems
Sliding Door Systems Standard Sliding System Reference Brand: Sapa Building System Plaisance 24 GENERAL DESCRIPTION Sliding window and door system with a frame depth of 50 mm (two rail version), 97mm (three
SECTION SERIES ALL GLASS ENTRANCES
1 SECTION 08 4210 1200 SERIES ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1.
GLASS DOORS > SWING. glasspivot > Framed Single
GLASS DOORS > SWING C A R VA R T. C O M glasspivot > Framed Single 2 0 1 8 C A R VA R T I N F O @ C A R V A R T. C O M 212.675.00 2 CARVART s glassdoor offering includes a broad range of design options
Guide Specifications- Section
Guide Specifications- Section 084113 LaCantina ALUMINUM Folding Door System PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum and glass folding door system with fingertip operation up to 52 wide and 10
1 3 4 Tie Rod Aluminum Swing Entrance Doors
Windows Curtain Walls Entrances Storefronts Series T200 Narrow Stile Series T300 Medium Stile T500 Wide Stile Configurations Narrow Stile (2 1 8 ) Medium Stile (3 1 2 ) Wide Stile (5 ) EFCO tie rod entrances
SECTION WALL AND DOOR PROTECTION
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to
glasswalls > Warehouse
GLASS WALLS > OFFICEFRONTS glasswalls > Warehouse 28 CARVART INFO@ 212.675.00 2 CARVART offers three diverse and aesthetically progressive options for glass office front partition systems. Each is designed
glasswalls > Simple Double
GLASS WALLS > OFFICEFRONTS glasswalls > Simple Double 28 CARVART INFO@ 212.675.00 2 CARVART offers three diverse and aesthetically progressive options for glass office front partition systems. Each is
glasspivot > Frameless
GLASS DOORS > SWING glasspivot > Frameless 28 CARVART INFO@ 212.675.00 2 CARVART s glassdoor offering includes a broad range of design options to choose from. By combining glass (colors and finishes),
SCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
Product Guide Specification
February 2015 528 Pioneer Parkway Clare, Michigan 48617 Toll Free 800-631-0212 Website www.tranquilsystems.com E-mail sales@tranquilsystems.com Product Guide Specification Tranquil Acoustic Walls with
GLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA1 Ultra Acoustical, STC 45/46, Omni, Glass Wall PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional s Manually Operated Maximum Opening Height: 12'
GLASSWALL SPECIFICATIONS
GLASSWALL SPECIFICATIONS Series GL1 Individual, Glass Panels PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional Panels Manually Operated Maximum Opening Height: 10' 5 [.m] Maximum
VARIOTEC - TRIMMED Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit
![VARIOTEC - TRIMMED Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit](/thumbs/90/102239626.jpg "VARIOTEC - TRIMMED Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit")
VARIOTEC - TRIMMED KWIK-WALL... One Source for Wall Systems. KWIK-WALL s Variotec Series - Glass wall systems answer the challenge for space division needs. This system ensures you can quickly and easily
SECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
glasswalls > Warehouse
G L A S S WA L L S > O F F I C E F R O N T S C A R VA R T. C O M glasswalls > Warehouse 2 0 1 8 C A R VA R T I N F O @ C A R V A R T. C O M 212.675.00 2 CARVART offers three diverse and aesthetically progressive
HORIZONTAL SLIDER SERIES 700. Main Frame Depth: 2 3/4 Glazing Thickness (Maximum): 5/8 Thermal Break:
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com HORIZONTAL SLIDER SERIES 700 Main
SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
GLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS PRODUCT OVERVIEW: Top Supported Center Stack Paired Panels Manually Operated Maximum Opening Height: 10'2 [3.1] Maximum Opening Width: Unlimited Select for Special Needs: Use
PRODUCT SPECIFICATIONS - SERIES 1090
PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET
PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET The SLIM-GLASS SOLUTIONS partition with monolithic panel is a system to divide indoor spaces with a lower of 40 mm of width and 25
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2006-2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Commercial
Soundmaster & Modernfold TECHNICAL DATA
This specification along with product information and model details can be downloaded from www.modernfold.com SPECIFICATION - SECTION 08 35 13 ACCORDION FOLDING DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS
1 P a g e w w w. s m o k e c o n t r o l. c o m. a u
PROPRIETARY ITEM: STOPLINE AND AUTOFIRE E60 FIRE WINDOWS AND DOORS FIRE RESISTANT GLASS WINDOWS AND DOORS PROTECTING OPENINGS CLOSE TO BOUNDARIES (BOUNDARY CONTROL TM ) PART 1 - GENERAL 1.01 SUMMARY A.
SECTION SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
VINYL-COMPOSITE SLIDING GLASS DOOR SYSTEMS
VINYL-COMPOSITE SLIDING GLASS DOOR SYSTEMS SERIES SI4100 A Durable, Efficient Sliding Door Solar Innovations ' high end Vinyl-Composite Sliding Glass Door Systems offer excellent water barrier performance,
SECTION SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION DEMOUNTABLE PARTITIONS
SECTION 10 22 19 DEMOUNTABLE PARTITIONS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY SPEC WRITER NOTE: 1. Demountable
Guide Specifications- Section
Guide Specifications- Section 084113 LaCantina ALUMINUM Folding Door System PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum and glass folding door system with fingertip operation up to 52 wide and 10
glassstackwall > Framed
GLASS WALLS > MOVABLE glassstackwall > Framed 28 CARVART INFO@ 212.675.00 2 GLASS WALLS > MOVABLE With four unique movable wall products, CARVART offers a broad range of ways to section off a space. CARVART
A. Manufacturer: A firm that produces primary glass or fabricated glass as defined in referenced glazing publications.
SECTION 08800 - GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
SECTION SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
OPERABLE PARTITIONS. Signature
OPERABLE PARTITIONS Signature 8000 SIGNATURE 2 WHO WE ARE Moderco is an international manufacturer of Manual & Electric Operable Partitions, Accordion Doors, Glass Wall Systems, and Gymnasium Dividers.
SECTION ALUMINUM ENTRANCES AND STOREFRONTS. A. Section Includes: Aluminum doors and window wall frames.
SECTION 08410 ALUMINUM ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Aluminum doors and window wall frames. B. Related Sections: 1. Section 08480 Balanced Doors 2. Section
SECTION PLASTIC TOILET COMPARTMENTS
PART1 GENERAL 1.01 SECTION INCLUDES A. Phenolic toilet compartments. B. Urinal and vestibule screens. 1.02 REFERENCE STANDARDS SECTION 10 2113.19 PLASTIC TOILET COMPARTMENTS A. ASTM A666- Standard Specification
SECTION SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION Coiling Doors and Grilles Model 4320
SECTION Coiling Doors and Grilles Model 4320 PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Grilles B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared
2. Typical door size shall be 3-0 x 7-0. Wider doors should be used if required by function.
08 08 00 - OPENINGS A. General Requirements: 1. All window types shall be approved by the University Representative. Exterior window frames shall be aluminum. Steel-framed windows are prohibited for exterior
SECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
LINEAR METAL CEILINGS Section
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
SWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
Sliding Patio Doors Brickmould Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/8 Scale 2-WideSlidingPatioDoors... 7-4 GlazingOptions: 3 Scale... 7-5 Grille Patterns... 7-6 SectionDetails: 6 Scale...
SECTION MEDICATION CABINET. 1.1 SUMMARY A. Section Includes: 1. Medication cabinets with self-contained refrigerator and fixtures.
SECTION 12 35 70.21 MEDICATION CABINET SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Medication
SECTION PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 101423 - PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
e. Cutouts and Holes for Toilet Accessories: Made to template and edge-reinforced.
TOILET COMPARTMENTS GENERAL INFORMATION 1.1 Unless otherwise directed by CU Facilities toilet compartments shall be floor-supported, and urinal screens shall be wall hung, with anchoring devices and accessories
SECTIONAL ALUMINUM DOORS
PART 1 GENERAL 1.1. GENERAL REQUIREMENTS 1.1.1. General Conditions and Division 01 apply to this section. 1.2. RELATED WORK Section 05500: Section 07900: Section 09900: Section 11169: Division 16: Metal
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Insulated Steel Doors B. Commercial Steel Doors C. Aluminum Doors D. Track and Framing E. Hardware 1.2 RELATED SECTIONS A.