CONSISTENT BUILD BISON STRONG LAFARGE GYPSUM IS NOW

Transcription

1 LAFARGE GYPSUM IS NOW CONSISTENT BUILD BISON STRONG Count on Continental Building Products to deliver consistent, sustainable, high-quality drywall and finishing products alongside the responsive support that always serves your business needs. We re committed to doing the right thing so you can build your business Bison Strong Visit to ind out more about how Bison Board drywall and inishing products can serve all your commercial and residential projects.

2 ABUSE- AND IMPACT-RESISTANT DRYWALL PRODUCTS Advantages replacement costs block construction used in specific UL fire-rated designs 10 score, ASTM D3273)* contributes to the attainment of LEED credits PROTECTA AR 100 TYPE X WITH MOLD DEFENSE * Abuse-, fire- and mold-resistant drywall used for interior walls and ceilings to provide greater resistance to surface abrasion and indentation compared to regular drywall products. PROTECTA HIR 300 TYPE X WITH MOLD DEFENSE * High impact-, fire- and mold-resistant drywall used for interior walls and ceilings to provide greater penetration resistance compared to regular abuse-resistant drywall products. Standards and and Codes Codes Standards and and Codes Codes ASTM C1396/C1396M, Section 5 and C36, Type X; Abuse Resistant per ASTM C1629/ C1629M; Mold Resistant per ASTM D3273. Federal Specification** SS-L-30d, Type III, Grade X; CAN/CSA-A82.27-M, Type X; and NYC MEA # M. UL Type LGFC6A. ASTM C1396/C1396M, Section 5 and C36, Type X; Abuse Resistant per ASTM C1629/ C1629M; Mold Resistant per ASTM D3273. Federal Specification** SS-L-30d, Type III, Grade X; CAN/CSA-A82.27-M, Type X; and NYC MEA # M. UL Type LGFC6A. *Mold Defense provides extra resistance against the formation of mold, but no product may be considered mold proof. The most effective way to avoid the formation of mold and mildew in drywall products is to limit or avoid water exposure during storage and construction, and after construction is complete. Used in combination with appropriate design, handling, construction and installation practices, Mold Defense drywall can provide increased mold and mildew resistance on its surface and in its core. ASTM D3273 is the Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber and is performed under controlled, laboratory conditions. Actual storage, handling, construction and installation conditions may vary from the environment created in the independent lab, and the use of the product in actual conditions may not replicate the ASTM results. **The federal specification for gypsum board, SS-L-30d, was withdrawn in It is provided here for information only and should not be referenced for new construction. ***Meets NYC requirements for stair and elevator shaft enclosures. VTEC Laboratories Report # /29/2009 Standard Length: 8 12 ft. Nominal Weight: 2.8 lbs./ft. 2 Test Results per per ASTM ASTM C1629 C1629 Test Results per per ASTM ASTM C1629 C1629 Soft Body Impact: 210 ft. lbs. (Level 2) Surface Abrasion: < in. (Level 3) Surface Indentation: in. (Level 1) Hard Body Impact: 70 ft. lbs. (Level 1) Standard Length: 8 and 10 ft. Nominal Weight: 2.8 lbs./ft. 2 Soft Body Impact***: 300 ft. lbs. (Level 3) Surface Abrasion: < in. (Level 3) Surface Indentation: in. (Level 1) Hard Body Impact***: 150 ft. lbs. (Level 3)

3 GLASS-MAT FACED DRYWALL PRODUCTS WEATHER DEFENSE PLATINUM SHEATHING TYPE X* Moisture-, mold- and fire-resistant exterior wall sheathing with enhanced fiberglass-mat facings to provide extended weatherability and outdoor exposure protection during and after construction. It is an ideal substrate behind brick, siding, EIFS, stucco and other permanent claddings. Standards and and Codes Codes ASTM C1177/C1177M, Type X and Florida State Report FL Meets properties of ASTM C1396/C1396M, Section 9. UL Type LGFC-WD. Long Edges: Square Standard Length: 8 ft. Nominal Weight: 2.5 lbs./ft. 2 Asbestos free WEATHER DEFENSE PLATINUM INTERIOR TYPE X* High-performance interior drywall with a special wet-area board formulation, treated core and fiberglass-mat facer technology, designed to provide exceptional moisture, mold and fire protection for interior applications and exterior soffits. Its innovative, off-white face panel and tapered edges allow for superior indoor finishing and decorating results. Standards and and Codes Codes ASTM C1658/C1658M, Section 7, Type X and ASTM D3273 for mold resistance. UL Type LGFC-WD. Standard Length: 8, 10 and 12 ft. Nominal Weight: 2.5 lbs./ft. 2 WEATHER DEFENSE PLATINUM SHAFTLINER TYPE X* Designed for use in lining elevator shafts, ventilation shafts, stairwells, for area separation walls in residential housing, and for other interior building applications requiring fire resistance. Standards and and Codes Codes Formulated to conform with ASTM C1658/ C1658M, Section 6, Type X and meets the properties of ASTM C 1396, Section 6, Gypsum Shaftliner Board and C 442, Type X; Federal Specification** SS-L-30d, Type IV, Grade X; and CAN/CSA-A82.27-M. UL Type LGFCSL. Long Edges: Double beveled Nominal Thickness: 1 in. Nominal Width: 2 ft. Standard Length: 8 ft. 12 ft. Nominal Weight: 4 lbs./ft. 2 Asbestos free Weather Defense Platinum Sheathing and Interior Drywall are also available in 1/2 thickness. Visit to find out more. Limitations: Weather Defense Platinum is not designed as a finished surface or for the direct application of textures, paints or coatings. Weather Defense Platinum is not designed as a nailing base. Mechanical fastening should pass through Weather Defense Platinum and fasten to the framing members. Do not immerse Weather Defense Platinum in water or subject to cascading water. *Weather Defense Platinum provides extra resistance against the formation of mold, but no product may be considered mold proof. The most effective way to avoid the formation of mold and mildew in drywall products is to limit or avoid water exposure during storage and construction, and after construction is complete. Used in combination with appropriate design, handling, construction and installation practices, Weather Defense Platinum drywall can provide increased mold and mildew resistance on its surface. ASTM D3273 is the Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber and is performed under controlled laboratory conditions. Actual storage, handling, construction and installation conditions may vary from the environment created in the independent lab, and the use of the product in actual conditions may not replicate the ASTM results. **The federal specification for gypsum board, SS-L-30d, was withdrawn in It is provided here for information only and should not be referenced for new construction.

4 LEVEL 5 DRYWALL PRODUCTS Advantages less time field-applied Level 5 finish used in specific UL fire-rated designs ASTM C1629 contributes to the attainment of LEED credits RAPID DECO LEVEL 5 Gypsum board pre-finished with a specially formulated skim-coat material to facilitate finishing to a Level 5 finish. This skim coat is factory-applied to provide a consistent and uniform finish. RAPID DECO LEVEL 5 TYPE X Fire-rated gypsum board pre-finished with a specially formulated skim-coat material to facilitate finishing to a Level 5 finish. This skim coat is factory-applied to provide a consistent and uniform finish. Standards Standards and and Codes Codes Standards Standards and and Codes Codes ASTM C1396/C1396M, Section 5, Gypsum Wallboard, C36 (factory-finished per ASTM C840 Level 5) and ASTM C1629, Surface Abrasion Level 3; Federal Specification* SS-L-30D, Type III, Grade R; and CAN/CSA-A82.27-M. ASTM C1396/C1396M, Section 5, Gypsum Wallboard, C36, Type X (factory-finished per ASTM C840 Level 5) and ASTM C1629, Surface Abrasion Level 3; Federal Specification* SS-L-30D, Type III, Grade X; CAN/CSA-A82.27-M, Type X; and NYC MEA # M. UL Type LGFC6A. Limitations: Rapid Deco is designed to replicate a field-applied skim coat. A skim coat will not approximate a plastered surface. For an entirely smooth, blemish-free surface, a veneer plaster or hard-wall plaster system is recommended. See Gypsum Association publication GA-214 for additional details on skim coating. Continental cannot control the workmanship of the installed or finished product. Finish satisfaction will only be obtained when proper installation practices are followed and products are properly used. Care must be taken to ensure all joints, trim and fasteners are properly treated and are flat to the plane of the board surface. Continental cannot control the painting and decorating process. Architectural specifications for decoration and manufacturer s product application instructions must be strictly followed to obtain finish satisfaction. *The federal specification for gypsum board, SS-L-30d, was withdrawn in It is provided here for information only and should not be referenced for new construction. Nominal Thickness: 1/2 in. Standard Length: 10 and 12 ft. (other lengths available by special order) Nominal Weight: 1.8 lbs./ft. 2 Standard Length: 8, 9, 10 and 12 ft. (other lengths available by special order) Nominal Weight: 2.2 lbs./ft. 2 Rapid Deco Level 5 and Type X are also available with Mold Defense. Visit to find out more.

5 QUALITY COMPLETE, START TO FINISH. It s how you finish the job that counts. That s why Continental Build Products offers professional-grade joint compounds designed to help you meet any finishing challenges head on. RAPID COAT LIGHTWEIGHT RAPID COAT MIDWEIGHT RAPID COAT FULLWEIGHT RAPID COAT LOW DUST RAPID DECO LEVEL 5 RAPID JOINT LAFARGE GYPSUM IS NOW Visit to find out more about how Bison Board drywall and finishing products can serve all your commercial and residential projects.

6 FINISHING PRODUCTS Visit to find out more about how Bison Board drywall and finishing products can serve all your commercial and residential projects. RAPID COAT LIGHTWEIGHT All-purpose joint compound that provides easy workability with a quick-drying, two-step application. Ideal for use in all phases of drywall finishing: taping, finishing, skim coating, texturing, filling corner beads and trim, and concealing nail or screw dimples. Can also be used as a bonding agent when laminating drywall together. RAPID COAT LOW DUST All-purpose joint compound specially formulated to reduce airborne dust generated during sanding. Ideal for use in all phases of drywall finishing: taping, finishing, skim coating, texturing, filling corner beads and trim, and concealing nail or screw dimples. Can also be used as a bonding agent when laminating drywall together. RAPID COAT MIDWEIGHT Professional-grade, all-purpose joint compound that provides higher durability and lower shrinkage. Ideal for use in all phases of drywall finishing: taping, finishing, skim coating, texturing, filling corner beads and trim, and concealing nail or screw dimples. Can also be used as a bonding agent when laminating drywall together. RAPID DECO LEVEL 5 Joint compound specifically formulated to be used with Continental Building Products Rapid Deco Level 5 skim-coated drywall. Can also be used as a traditional skim-coat material for non-coated drywall. Ideal for use in all phases of drywall finishing: taping, finishing, skim coating, texturing, filling corner beads and trim, and concealing nail or screw dimples RAPID COAT FULLWEIGHT Professional-grade, all-purpose joint compound that provides superior durability and maximum bond. Ideal for use in all phases of drywall finishing: taping, finishing, skim coating, texturing, filling corner beads and trim, and concealing nail or screw dimples. Can also be used as a bonding agent when laminating drywall together. RAPID JOINT (20, 45, 90, 210) Chemically activated setting-type joint compound with time-controlled hardening properties. Durable and excellent for most pre-filling, taping and first or finish coating applications. Available in four set times (20, 45, 90 and 210 minutes).