DURA-BLOK Rooftop Supports
|
|
|
- Oliver Boyd
- 6 years ago
- Views:
Transcription
1 Cooper B-Line s new line of DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable tray, and roof walkways. Manufactured to provide years of service in harsh, roof top environments, Dura-Blok is made from 100% recycled rubber, require no supplemental rubber pads, and will not float or blow away. 1 gaps between blocks allow water to flow freely around longer assemblies. For added strength, the Dura-Blok support channel is through bolted on all sizes. For added visibility, a reflective strip is incorporated on both sides of each Dura-Blok. Beyond product durability, Dura-Blok helps to dampen vibration, are not sharp or abrasive and require no roof penetration to maximize existing roof life - and roof structural and environmental integrity. Recommended Torque (In channels) See page 44 Channel Nuts & Hardware section Materials & Finishes See appropriate fitting s pages. Alternative finishes available upon request. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters. 152
2 SUPPORT BASES ONLY Base only - see chart for height, width and length. Load Rating - Ultimate Uniform Load (See Chart Below)* Dura-Blok channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The Dura-Blok is UV resistant and suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories. DBM Height x Width x Length Wt./Each Load Rating Part No. In. (mm) Lbs. (kg) Lbs. (kn) DBM 4 x 6 x 4.8 (101.6 x x 121.9) 2.35 (1.07) 200 (0.89) DBP 4 x 6 x 9.6 (101.6 x x 243.8) 4.48 (2.03) 500 (2.22) DBP DB SERIES SUPPORT BASE WITH B44 CHANNEL Base with 14 ga. (1.9mm) galvanized channel 1 high (25.4mm) - see chart for height, width and length. Load Rating - Ultimate Uniform Load (See Chart Below)* Dura-Blok DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 158) For sloped roofs use B634 adjustable hinge fittings (see page 84). Height x Width x Length Wt./Each Load Rating Part No. In. (mm) Lbs. (kg) Lbs. (kn) DB10 DB20 DB5 5 x 6 x 4.8 (127.0 x x 121.9) 2.75 (125) 200 (0.89) DB10 5 x 6 x 9.6 (127.0 x x 243.8) 5.28 (2.39) 500 (2.22) DB20 5 x 6 x 20.2 (127.0 x x 513.1) (4.82) 1000 (4.45) DB30 5 x 6 x 30.8 (127.0 x x 782.3) (7.25) 1500 (6.67) DB40 5 x 6 x 41.4 (127.0 x x ) (9.68) 2000 (8.89) DB48 5 x 6 x 52.0 (127.0 x x ) (12.40) 2500 (11.12) DB6 SERIES SUPPORT BASE WITH B12 CHANNEL Base with 12 ga. (2.6mm) galvanized channel 2 7 /16 high (61.9mm) - see chart for height, width and length. Load Rating - Ultimate Uniform Load (See Chart Below)* Dura-Blok DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 158) For sloped roofs use B634 adjustable hinge fittings (see page 84). DB610 DB30 Height x Width x Length Wt./Each Load Rating Part No. In. (mm) Lbs. (kg) Lbs. (kn) DB /16 x 6 x 9.6 (163.5 x x 243.8) 6.36 (2.88) 500 (2.22) DB /16 x 6 x 20.2 (163.5 x x 513.1) (5.85) 1000 (4.45) DB /16 x 6 x 30.8 (163.5 x x 782.3) (8.82) 1500 (6.67) DB /16 x 6 x 41.4 (163.5 x x ) (11.79) 2000 (8.89) DB /16 x 6 x 52.0 (163.5 x x ) (14.76) 2500 (11.12) DB620 * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. DB
3 DB10 SERIES SUPPORT BASES WITH B22 CHANNEL Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel 1 5 /8 high (41.3mm) - see chart for height, width and length. Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* Dura-Blok DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 158) DB10-36 Height x Width x Length Wt./Each Part No. In. (mm) Lbs. (kg) DB /8 x 6 x 28 (142.9 x x 711.2) (5.97) DB /8 x 6 x 36 (142.9 x x 914.4) (6.51) DB /8 x 6 x 42 (142.9 x x ) (7.04) DB /8 x 6 x 50 (142.9 x x ) (7.46) DB /8 x 6 x 60 (142.9 x x ) (8.14) DB10-50 DBM SERIES SUPPORT BASE WITH RISER ROD & CLAMP Base with 3 /8-16 threaded rod and B3198H clamp - see chart for height, width and length Load Rating 50 lbs. (0.22kN) (Ultimate Load)* Dura-Blok DBM-Series pipe/tubing support is designed for support of single piping systems where elevation adjustment is needed. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. DBM-2CT DBM-1 Clamp Block -Height x Width x Length Height** Min.-Max. Wt./Each Part No. Part No. In. (mm) In. (mm) Lbs. (kg) DBM- 1 /2CT B3198HCT- 1 /2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.75 (1.25) DBM- 3 /4CT B3198HCT- 3 /4 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.76 (1.25) DBM-1CT B3198HCT-1 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.84 (1.29) DBM-1 1 /4CT B3198HCT-1 1 /4 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.95 (1.34) DBM-1 1 /2CT B3198HCT-1 1 /2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.96 (1.34) DBM-2CT B3198HCT-2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 3.03 (1.37) DBM- 1 /2 B3198H- 1 /2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.78 (1.26) DBM- 3 /4 B3198H- 3 /4 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.84 (1.29) DBM-1 B3198H-1 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.86 (1.30) DBM-1 1 /4 B3198H-1 1 /4 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.93 (1.33) DBM-1 1 /2 B3198H-1 1 /2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 2.99 (1.36) DBM-2 B3198H-2 4 x 6 x 4.8 (101.6 x x 121.9) ( ) 3.10 (1.41) See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing. * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. 154
4 DBE SERIES SUPPORT BASE WITH ROD RISERS & CHANNEL Base with (2) 1 /2 electro zinc all threaded rod risers - Top channel is 1 (25.4mm) tall. See chart for adjustable height x wide x length. Load Rating 200 lbs. (0.89kN) (To increase load capacity use load distribution plate CLDP10) Dura-Blok DBE-Series channel support is designed as a superior support of piping systems, cable tray, HVAC equipment and many other applications where elevation adjustment is critical. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 158) Adjustable Height x Width x Length Wt./Each Part No. In. (mm) Lbs. (kg) DBE /2-8 x 6 x 9.6 ( x x 243.8) 5.68 (2.58) DBE /2-12 x 6 x 9.6 ( x x 243.8) 5.72 (2.59) DBE /2-16 x 6 x 9.6 ( x x 243.8) 5.76 (2.61) DURA-BLOK Rooftop Supports DBR SERIES SUPPORT BASE WITH ROD RISERS & PIPE ROLL Base with (2) 1 /2 electro zinc all threaded rod risers and a B /2 pipe roll with sockets - base is 4 (101.6mm) high x 6 (152.4mm) wide x 9.6 (243.8mm) long. Overall height is 12 (304.8mm) from bottom of base to contact point on roller. Pipe roll & sockets for up to 3 1 /2 (90) pipe sizes. Load Rating 200 lbs. (0.89kN) (To increase load capacity use load distribution plate CLDP10) Dura-Blok DBR-Series support is designed to support pipe up to 3 1 /2 (90) nominal size where difference in elevation is required and longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. Adjustable Height x Width x Length Wt./Each Part No. In. (mm) Lbs. (kg) DBR10-12 up to 12 x 6 x 9.6 (up to x x 243.8) 8.20 (3.72) CLDP10 LOAD DISTRIBUTION PLATE 11 ga. (3.0mm) steel plate with slots. Dimensions: 1 5 /8 (41.3mm) wide x 9 1 /2 (241.3mm) long. Dura-Blok CLDP10 load bearing stabilizer plate increases load ratings for DBE Series and DBR Series by allowing the load from the threaded rods to be distributed over the length of the base instead of the point load where the rods attach to the base. Thickness x Width x Length Wt./Each Part No. In. (mm) Lbs. (kg) Loosen hex nuts and slide plate under the flat washers CLDP10 11 Ga. x 1 5 /8 x 9 1 /2 (3.0 x 41.3 x 241.3) 0.53 (0.24) Retighten the hex nuts with plate in place * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. 155
5 DB DS SERIES SUPPORT BASES WITH B22SH VERTICAL & HORIZONTAL CHANNEL MEMBERS Product is shipped unassembled. Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1 high (25.4mm) - Bases are 5 (127.0mm) high x 6 (152.4mm) wide x 20.2 (513.1mm) long. Vertical & Horizontal Riser Channels (SH Style) /8 (41.3mm) x 1 5 /8 (41.3mm) x 12 ga. (2.6mm) Fittings & Hardware - Electro-Plated Steel Ultimate Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* Dura-Blok DB DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 158) B (114mm) DB2318DS A Height (overall) B Width (overall) Length (overall) DB5336DS DB2924DS * General Note: Consult roofing manufacturer or engineer for roof load capacity. The weakest point may be the insulation board beneath the rubber membrane. 156
6 DB DS SERIES cont. A Min. to Max. B Part No. In. (mm) In. (mm) DB2318DS to (268 to 527) 13 1 /2 (343) DB2918DS to (268 to 679) 13 1 /2 (343) DB4118DS to (268 to 984) 13 1 /2 (343) DB5318DS to (268 to 1289) 13 1 /2 (343) DB2324DS to (268 to 527) 19 1 /2 (495) DB2924DS to (268 to 679) 19 1 /2 (495) DB4124DS to (268 to 984) 19 1 /2 (495) DB5324DS to (268 to 1289) 19 1 /2 (495) DB2336DS to (268 to 527) 31 1 /2 (800) DB2936DS to (268 to 679) 31 1 /2 (800) DB4136DS to (268 to 984) 31 1 /2 (800) DB5336DS to (268 to 1289) 31 1 /2 (800) DB2348DS to (268 to 527) 43 1 /2 (1105) DB2948DS to (268 to 679) 43 1 /2 (1105) DB4148DS to (268 to 984) 43 1 /2 (1105) DB5348DS to (268 to 1289) 43 1 /2 (1105) Height (overall) Width (overall) Length (overall) Wt./Each Part No. In. (mm) In. (mm) In. (mm) lbs. (kg) DB2318DS 23 (584) 25 5 /8 (651) 20.2 (513) (15.11) DB2918DS 29 (736) 25 5 /8 (651) 20.2 (513) (15.88) DB4118DS 41 (1041) 25 5 /8 (651) 20.2 (513) (17.42) DB5318DS 53 (1346) 25 5 /8 (651) 20.2 (513) (18.96) DB2324DS 23 (584) 31 5 /8 (803) 20.2 (513) (15.49) DB2924DS 29 (736) 31 5 /8 (803) 20.2 (513) (16.26) DB4124DS 41 (1041) 31 5 /8 (803) 20.2 (513) (17.80) DB5324DS 53 (1346) 31 5 /8 (803) 20.2 (513) (19.34) DB2336DS 23 (584) 43 5 /8 (1108) 20.2 (513) (16.26) DB2936DS 29 (736) 43 5 /8 (1108) 20.2 (513) (17.03) DB4136DS 41 (1041) 43 5 /8 (1108) 20.2 (513) (18.57) DB5336DS 53 (1346) 43 5 /8 (1108) 20.2 (513) (20.11) DB2348DS 23 (584) 55 5 /8 (1415) 20.2 (513) (17.03) DB2948DS 29 (736) 55 5 /8 (1415) 20.2 (513) (17.80) DB4148DS 41 (1041) 55 5 /8 (1415) 20.2 (513) (19.34) DB5348DS 53 (1346) 55 5 /8 (1415) 20.2 (513) (20.88) A = Adjustable height from bottom of Dura-Blok to top of horizontal channel. B = Space between fittings that support horizontal channel. Height (overall) = Distance from bottom of Dura-Blok to top of upright channel. Width (overall) = Distance from outside-to-outside of Dura-Blok supports. Length (overall) = Distance from end-to-end of Dura-Blok supports. 157
7 DBR SERIES SUPPORT BASES WITH B42 CHANNEL & PIPE ROLLER Base with 14 ga. (1.9mm) galvanized channel 1 high (25.4mm) tall - see chart for height, width and length. Load Rating: (See Chart Below)* Dura-Blok DBR-Series support is designed to support pipe where longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. DBR4-6 DBR16-20 Roller Block & Channel -Height x Width x Length Height** Wt./Each Load Rating Part No. Part No. In. (mm) In. (mm) Lbs. (kg) Lbs. (kn) DBR2-3 1 /2 B to 3 1 /2 5 x 6 x 9.6 (127.0 x x 243.8) 7.09 (180) 5.28 (2.39) 500 (2.22) DBR4-6 B to 6 5 x 6 x 9.6 (127.0 x x 243.8) 7.09 (180) (4.82) 500 (2.22) DBR8-10 B x 6 x 20.2 (127.0 x x 513.1) 8.34 (212) (7.25) 1000 (4.45) DBR12-14 B x 6 x 20.2 (127.0 x x 513.1) 9.38 (238) (9.68) 1000 (4.45) DBR16-20 B x 6 x 20.2 (127.0 x x 513.1) 9.78 (248) (12.11) 1000 (4.45) See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing. Compatible Components Available to make DURA-BLOK bases more versatile (See Strut Systems Catalog for other products) BTS TN Nuts HHCS B22TH B22SH B634 B101 B104 B2400 Series B-LINE BVP /2. I.P BVT Series B2000 Series B3124 Series B3126 Series B218 B379 B219 Series B479 Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units. 158
8 ROOFTOP APPLICATIONS 159
9 ROOFTOP SUPPORTS IN WALKWAY APPLICATIONS Safety Grating is available with slip resistant Grate-Lock, helping provide a safe walkway for foot traffic on the roof. Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to the roof surface. The cross-over design offers safe passage over existing cabling, piping, cable tray or any other interference on the rooftop. The self cleaning pattern allows water and dirt to easily flow through, helping make the grating an ideal walkway in all weather conditions. Handrail options are available 160
10 Dura-Blok Rooftop Supports Dura-Blok Supports 161
DURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility.
is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Channels are through bolted on all sizes for added strength and a 1
DB10 BLTD C10 Pipe Support. Description. Manufacturer Information BOLTED FRAMING GTIN UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DB10 BLTD C10 Pipe Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
DURA-BLOK rooftop supports BRTS-13 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-13 DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to provide an economical
B-LINE SERIES. DURA-BLOK rooftop supports BRTS-17 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-17 B-LINE SERIES DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to
Before the C-Port, treated wood and plastics dominated rooftops with pipe and duct supports.
The Result Of A Lost Line. Where the rubber hits the roof Before the C-Port, treated wood and plastics dominated rooftops with pipe and duct supports. Drawbacks of Wood and Plastics Deteriorates Punctures
THE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS
THE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS Connected.Simply www.zsi-foster.com Cush-A-Block Features: 100% Recycled Rubber Qualifies for LEED Credits Meets the Buy America Act and American
YOUR ROOFTOP SUPPORT SOLUTION C
YOUR ROOFTOP SUPPORT SOLUTION C Ports provide innovative, economical support systems for Gas and Refrigeration Pipes, Electrical Conduit, Ducting, Roof Walkways, Air Conditioning, HVAC and Solar Racking.
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE OVERVIEW REVOLUTIONARY VERSATILE EFFICIENT The Roof Top Blox is a revolutionary roof top support block system that works with height extension rods, securing
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE OVERVIEW REVOLUTIONARY VERSATILE EFFICIENT The Roof Top Blox is a revolutionary roof top support block system that works with height extension rods, securing
SECTION ROOF ACCESSORIES
SECTION 07700 ROOF ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Rooftop support products including: 1. Pillow block pipe supports. 2. Dynamic support series. 3. Elevate support series. 4. Custom
SECTION NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS. For best results, display hidden notes to specifier.
SECTION 15062 NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS PART 1 GENERAL 1.1 SECTION INCLUDES For best results, display hidden notes to specifier. A. Portable, non-penetrating, rooftop support
Bases for Duct Support and Hanging Pipes
RTS systems provide innovative and economical solutions for non-penetrating rooftop support systems. Our environmentally friendly systems dampen vibrations helping to extend roof life while providing stable
designed to be better. Rooftop Support Systems
designed to be better. Rooftop Support Systems Cablo-Port is the innovative solution for rooftop equipment support. Standard Curb style with Poorly supported HVAC equipment, pipes and cable pathways can
CONSTRUCTION MATERIALS
CONSTRUCTION MATERIALS T E C H N O L O G I E S LABORATORY TEST RESULTS Report for: Dymotek Date: September 7, 2010 7 Main St., P.O. Box 440 Revised: December 17, 2010 Ellington, CT 06029 Attention: Tom
SRS-02 NEW SEISMIC RESTRAINTS. Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems SYSTEMS THAT MAKE SENSE
NEW SRS-02 SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems OSHPD Pre-Approved System SYSTEMS THAT MAKE SENSE INTRODUCTION INTRODUCTION What
Fig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
Product Guide Specification
OMG Roofing Products 153 Bowles Road Agawam, Massachusetts 01001 Toll Free 800-633-3800 Fax 413-821-0417 Website www.olyfast.com E-mail info@olyfast.com Product Guide Specification Specifier Notes: This
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
Walraven Rooftop Solutions
Versatile, durable solutions and support Walraven Rooftop Solutions For supporting rooftop installations BIS Yeti 480 Walraven Rooftop Solutions Your challenge, our support! Walraven Rooftop Solutions
Walraven Rooftop Solutions
Versatile, durable solutions and support Walraven Rooftop Solutions For supporting rooftop installations BIS Yeti 480 Walraven Rooftop Solutions Your challenge, our support! Walraven Rooftop Solutions
SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems
SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems SYSTEMS THAT MAKE SENSE INTRODUCTION INTRODUCTION What is Seismic Bracing? Seismic forces are
The support you rely on.
Mechanical products and services MPS-17 The support you rely on. Mechanical products and services overview. The support you rely on. Improving efficiency and safety during installation with maximum return
Seismic Restraints. Cent-R-Rail Supplement* SYSTEMS THAT MAKE SENSE
SRSCR-0 Seismic Restraints Cent-R-Rail Supplement* Multi-Directional Bracing For Data-Track, Half-Rack and Multi-Tier Half-Rack Systems Structural Engineer S 9 *To be used in conjunction with Cooper B-Line
Fig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
Fiberstrut Parts Catalogue
Fiberstrut s Catalogue 1 Technical Information Fiberstrut Fabrication The installation of fiberglass channels and accessories is similar to the installation of metallic channels and accessories. All standard
4Dimension strut & accessories
Strut Systems 4DS-15R 4Dimension strut & accessories Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability and make the places we live and
OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION SUPPORTS AND ANCHORS
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Supports and anchors for piping systems and equipment. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. The provisions of Section 15050, Basic
Piping Accessories TCC-1. TCC-3 Pipe Penetration System. Pipe Penetration System TCC-5. Pipe Penetration System
TCC-1 Pipe Penetration System TCC-3 Pipe Penetration System TCC-5 Pipe Penetration System 54 years of excellence... www.thybar.com 82 Table of Contents General Information 84 Specifications 85 Assembly
Beam Clamps. B303-B309 - Beam Clamps. Fig. B321 - Series Beam Clamps. Size Range: 1 /4"-20 thru 5 /8"-11 rod
eam lamps 303-309 - eam lamps Set Screw Included Size Range: 1 /4"-20 thru 5 /8"-11 rod Function: Designed for attaching a hanger rod to the flange of a beam. pprovals: onforms to Federal Specification
Flextray - Accessories
Flextray - 40 Flextray - Protects cable from debris and dust Adds security to cable installation Easy bend-over tabs secure cover to trays Available for 2 (50mm) to 24 (600mm) wide trays Comes in 118 (2997mm)
Part Rod Size Setscrew C T Design Load Approx. Wt./100 No. A Size in. (mm) in. (mm) Lbs. (kn) Lbs. (kg)
eam lamps 303-309 - eam lamps Size Range: 1 /4"-20 thru 5 /8"-11 rod Function: Designed for attaching a hanger rod to the flange of a beam. pprovals: onforms to Federal Specification WW-H-171E & --1192,
Project No
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Seismic Requirements for single rod hanger supports for conduit, pipe and other similar systems. B. Seismic Requirements for trapeze type supports for cable tray,
SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
1 1 4" FRAMING SYSTEM
4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z
SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
Interior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
SECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
Product Warranty Every VERSABAR product has been carefully inspected during manufacturing, and prior to shipment. We guarantee to correct any defect called to our attention in writing within six months
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS
Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
Concrete Inserts. B Adjustable Metal Deck Ceiling Bolt
B3019 - Adjustable Metal Deck Ceiling Bolt Size Range: 3 /8"-16 thru 3 /4"-10 rod Function: For use in metal deck formed concrete to attach hanger rods. Allows for pre-positioning of hanger rods in poured
ZS880 Linear Shower Drain Installation Instructions
Introduction PATENT PENDING The Zurn ZS880 Stainless Steel Linear Shower Drain incorporates a simple approach to bathroom shower design, when compared to traditional point-drain applications. The linear
Seismic Installation Manual
Seismic Installation Manual This manual provides the design strength capacities and installation guidelines for the Restraint systems brace components for use in the design of an overall bracing/restraint
ROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING
ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity
SEISMIC RESTRAINT SYSTEM
1. GENERAL 1.1. Description: SECTION 16012 SEISMIC RESTRAINT SYSTEM 1.1.1. This specification covers design and installation of seismic bracing and anchorage required for conduit, cable tray, bus duct,
SECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic
The support you rely on.
Mechanical products and services MPS-15 The support you rely on. Mechanical products and services overview. Strut System Solution Complete line of strut and strut fittings Unlike other offerings, our products
Stainless Steel Seamless Tubing and Tube Support Systems
www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked
Seismic bracing products
Seismic Bracing Products SEISMEP-18 Seismic bracing products for mechanical, electrical & plumbing systems Introduction For over 45 years, the TOLCO brand has been synonymous with innovative, labor saving
SECTION I -- IRONWORK
SECTION I -- IRONWORK CONTENTS PAGE 1. GENERAL... I-2 1.1. Introduction... I-2 2. REQUIREMENTS... I-2 2.1. General... I-2 2.2. Auxiliary Framing... I-2 2.3. High Seismic Risk Zone Requirements... I-3 2.4.
A. This Section includes steel cable trays and accessories.
SECTION 26 05 36 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Support Systems for Rooftop Building Services. ecosupportproducts.com. protect the roof. protect the warranty. protect the environment.
Support Systems for Rooftop Building Services ecosupportproducts.com protect the roof. protect the warranty. protect the environment. Why EcoFoot? The design of the EcoFoot was derived from necessity.
Steel Forming System BROCHURE. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. Max-A-Form System Design The Max-A-Form Forming System combines
Grape St. Denver, CO
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 18 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless Steel(1/2 12 ) Adjustable Clevis Hanger 11GI 11GI ElectroGalv import (1/2 12
SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
FAST-09. Flextray F.A.S.T. System The Next Generation RF Solution
FAST-09 Flextray F.A.S.T. System The Next Generation RF Solution Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required for
SUPPORT AND ANCHORS SECTION 15090
SUPPORT AND ANCHORS SECTION 15090 PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. Work included in this Section: Materials, equipment, fabrication, installation and tests in conformity with applicable codes
SECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
Superstrut. Metal Framing. Pipe Straps, Pipe Clamps and Hangers
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger Design Pipe hangers are of advanced design
DATA CENTER ACCESS FLOOR SYSTEM
DATA CENTER ACCESS FLOOR SYSTEM FS Series Data Center Panel Camino FS Series panel with high pressure laminate. 3/4" wide x 1" deep steel stringer. Stringer gasket. Also available in gravity-loc system
SECTION METAL STAIRS
SECTION 05510 METAL STAIRS PART 1 GENERAL 1.01 SECTION INCLUDES A. Stairs with concrete treads. B. Stairs with metal treads. C. Structural steel stair framing and supports. D. Handrails and guards. 1.02
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 22 0529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
SECTION HVAC GRAVITY VENTILATORS
SECTION 23 37 23 HVAC GRAVITY VENTILATORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Section 5 Panels & Accessories
Contents Section 5 Panels 74-76 Stiffener/Handle 79 Wire Mesh 75 Sliding Door Guide 80 Panel Mounting locks 77 Rolling Door Guide 81 Mesh Retainers 78 ifold Door Glide 82-83 Mesh Clamp 79 T-Clips 84 Panels
TOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
Eaton's B-Line Series Fixings, Hanging & Support Solutions Guide
B-Line Series Eaton's B-Line Series ixings, Hanging & Support Solutions Guide Energizing a world that demands more. Discover today s Eaton. Powering business worldwide As a global power management company,
SPECIFICATION & DESIGN MANUAL " AISI 1060 to 1065 Rockwell Hardness 51 to 55 Perma-Seal coated Stick-E Pin 3/4" (Step Shank) 1"
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL TM Stick-E Electrical and Mechanical Fastening System PRODUCT DESCRIPTION The Stick-E fastening system uses Trak-It gas technology with specially designed
Student Services & Classroom Addition
SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Product Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
City of Minot Auditorium Non-Upholstered Arena Seating Specifications
City of Minot Auditorium Non-Upholstered Arena Seating Specifications **ALL BIDDERS MUST INCLUDE A DETAILED DRAWING FOR UPPER SEATING AREAS WITH THEIR BID. ALL DRAWINGS MUST INCLUDE ALL RELEVANT MEASUREMENTS,
Walraven Support System
walraven.com Walraven Support System A solid and reliable foundation for any Strut based installation Walraven Support System A solid and reliable foundation for any Strut based installation BIS Yeti 480
ASSEMBLY AND OPERATING MANUAL LTW SLIDE RAIL SYSTEM - Type PV
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
PTFE Pipe Slide Assemblies
PTFE Slide Assemblies Overview Application Anvil PTFE pipe slide assemblies are designed to support the pipe and provide for lateral and axial movement due to thermal expansion and contraction of the piping
nvent CADDY Pyramid Anchoring System
nvent CADDY Pyramid Anchoring System Rooftop Anchoring EASE INSTALLATION IMPROVE USER EXPERIENCE ENSURE A SAFE PRODUCT nvent CADDY Pyramid Anchoring System As a whole, the nvent CADDY Pyramid Anchoring
KINETICS Pipe & Duct Seismic Application Manual
SELECTION & LOCATION OF RESTRAINTS FOR PIPE AND DUCT S7.1 Introduction: The actual selection of the seismic restraints and the approximate locations for those restraints along the pipe or duct has typically
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
SECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
B B B B3104 CT B3104CT CT B3104CT B3100C AS B422 Right Angle Clamp
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 14 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
Architectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification
Trench Duct Class Catalog 5230CT9601R10/08
5230CT9601R10/08 2009 Class 5230 CONTENTS Application.................................................5 Unassembled Trench Duct Components.........................6 Factory Assembled Trench Duct..............................11
C. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
Miller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System
For over 65 years the Miller brand has been synonymous with personal fall protection products and services. As the global leader in safety at height solutions, Honeywell Safety Products introduces a new
Com-Tray. Under Floor
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 0529 - MECHANICAL SUPPORTING DEVICES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
SECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Product Specification ArmorGuard Barrier System
TB 081030 Rev. 0 Page 1 of 6 Product Specification ArmorGuard Barrier System I. General The ArmorGuard Barrier System is a longitudinal barrier, as defined in the AASHTO Roadside Design Guide, which can
Architectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL ROOF AND WALL PANELS This Guide Specification is to be used
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Metal Framing Engineering Data & Specifications
Design Data Metal Framing Channel Elements of Sections Nominal Thickness (inches) 12 GA =.105 I Moment of inertia 14 GA =.075 S Section of Modulas 16 GA =.060 r Radius of Gyration Z Nominal Axis A Area
ALISPLY. Scaffold Plank. Aligner. Plate Washer ½ x 6 x 6
Alisply components and accessories illustrated herein have been designed with safety and performance in mind to help achieve a safe and productive forming operation. It is recommended that all construction
Conergy SolarFamulus II
Conergy SolarFamulus II Installation manual www.conergy.com Table of Contents Table of Contents SolarFamulus II for universal use on flat roofs 1 Introduction 1 1.1 Short description 1 1.2 Intended use