MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Transcription

1 MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) SW 26 Steet, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Floida T (786) F (786) NOTICE OF ACCEPTANCE (NOA) Santafe Copoation 8825 NW 95 th Steet Medley, FL SCOPE: This NOA is being issued unde the applicable ules and egulations govening the use of constuction mateials. The documentation submitted has been eviewed and accepted by Miami-Dade County RER - Poduct Contol Section to be used in Miami Dade County and othe aeas whee allowed by the Authoity Having Juisdiction (AHJ). This NOA shall not be valid afte the expiation date stated below. The Miami-Dade County Poduct Contol Section (In Miami Dade County) and/o the AHJ (in aeas othe than Miami Dade County) eseve the ight to have this poduct o mateial tested fo quality assuance puposes. If this poduct o mateial fails to pefom in the accepted manne, the manufactue will incu the expense of such testing and the AHJ may immediately evoke, modify, o suspend the use of such poduct o mateial within thei juisdiction. RER eseves the ight to evoke this acceptance, if it is detemined by Miami-Dade County Poduct Contol Section that this poduct o mateial fails to meet the equiements of the applicable building code. This poduct is appoved as descibed heein, and has been designed to comply with the Floida Building Code including the High Velocity Huicane Zone of the Floida Building Code. DESCRIPTION: Mission Bael Roofing LABELING: Each unit shall bea a pemanent label with the manufactue's name o logo, city, state and following statement: "Miami-Dade County Poduct Contol Appoved", unless othewise noted heein. RENEWAL of this NOA shall be consideed afte a enewal application has been filed and thee has been no change in the applicable building code negatively affecting the pefomance of this poduct. TERMINATION of this NOA will occu afte the expiation date o if thee has been a evision o change in the mateials, use, and/o manufactue of the poduct o pocess. Misuse of this NOA as an endosement of any poduct, fo sales, advetising o any othe puposes shall automatically teminate this NOA. Failue to comply with any section of this NOA shall be cause fo temination and emoval of NOA. ADVERTISEMENT: The NOA numbe peceded by the wods Miami-Dade County, Floida, and followed by the expiation date may be displayed in advetising liteatue. If any potion of the NOA is displayed, then it shall be done in its entiety. INSPECTION: A copy of this entie NOA shall be povided to the use by the manufactue o its distibutos and shall be available fo inspection at the job site at the equest of the Building Official. This enews NOA# and consists of pages 1 though 5. The submitted documentation was eviewed by Feddy Semino. Page 1 of 5

2 ROOFING ASSEMBLY APPROVAL Categoy: Sub-Categoy: Mateial: Deck Type: Roofing Roofing s Clay Wood 1. SCOPE This enews a oofing system using Santafe Mission Baell, as manufactued Ladillea Santafe S.A.in Bogota, Colombia and distibuted by Santafe Copoation as descibed in Section 2 of this Notice of Acceptance. Fo locations whee the pessue equiements, as detemined by applicable Building code does not exceed the values listed in Section 4 heein. The attachment calculations shall be done as a moment based system. 2. PRODUCT DESCRIPTION Manufactued by Applicant Mission Bael Clay Roof Tim Pieces Dimensions L = 18 W = tapeed 7.5 to 9 l = vaies w = vaies vaying thickness 2.1 MANUFACTURING LOCATION 1. Bogota, Colombia Test Specifications ASTM C1167 ASTM C1167 Poduct Desciption High pofile, two piece, tapeed clay oof tile equipped with one nail holes. Fo nail-on with clip, mota set and adhesive set applications. Accessoy tim, ceamic oof pieces fo use at hips, akes, idges and valley teminations. Manufactued fo each tile pofile. 2.2 SUBMITTED EVIDENCE: Test Agency Test Identifie Test Name/Repot Date The Cente fo Applied Engineeing, Inc TAS /01/94 The Cente fo Applied Engineeing, Inc TAS /01/94 The Cente fo Applied Engineeing, Inc TAS /01/95 The Cente fo Applied Engineeing, Inc. Poject: (307023) TAS /01/94 Ameican Test Lab of South Floida RT ASTM C /25/17 PRI Asphalt Technologies, Inc. SFTC TAS /01/02 Page 2 of 5

3 3. LIMITATIONS 3.1 Fie classification is not pat of this acceptance. 3.2 Fo mota o adhesive set tile applications, a static field uplift test shall be pefomed in accodance with TAS Applicant shall etain the sevices of a Miami-Dade County Cetified Laboatoy to pefom quately test in accodance with TAS 112, appendix A. Such testing shall be submitted to the Building Code Compliance Office fo eview. 3.4 Minimum undelayments shall be in compliance with the applicable Roofing Applications Standads listed section 4.1 heein /90 hot mopped undelayment applications may be installed pependicula to the oof slope unless stated othewise by the undelayment mateial manufactues published liteatue. 3.6 This acceptance is fo wood deck applications. Minimum deck equiements shall be in compliance with the applicable Building Code. 4. INSTALLATION 4.1 Santafe 'Mission Bael' and its components shall be installed in stict compliance with Miami Dade County Roofing Application Standad RAS 118, RAS 119, and RAS Data Fo Attachment Calculations. Table 1: Aveage Weight (W) and Dimensions (l x w ) Weight-W (lbf) Length-l (ft) Width-w (ft) Mission Bael Clay Roof Table 2: Aeodynamic Multiplies - (ft 3 ) (ft 3 ) Diect Deck Application Mission Bael Clay Roof Mission Bael Clay Roof Table 3: Restoing Moments due to Gavity - M g (ft-lbf) 3":12" 4":12" 5":12" 6":12" 7":12" o geate Table 4: Attachment Expessed as a Moment - M f (ft-lbf) Application Minimum Attachment Mission Bael Clay Roof Nail-on With A Clip System The nail hole shall be located at the cente of the cove tile, 1-1/2" fom the head. 2. Minimum 3 headlap. Page 3 of 5

4 Table 6: Attachment Expessed as a Moment - M f (ft-lbf) fo Single Patty Adhesive Set Systems Application Minimum Attachment Mission Bael Clay Roof 3M TM 2-Component Foam Roof Adhesive AH Place 35 gams pe pan and 35 gams pe cap. Table 7: Attachment Expessed as a Moment - M f (ft-lbf) fo Mota Set Systems Application Attachment Mission Bael Clay Roof Mota Set LABELING 5.1 All tiles shall bea the impint o identifiable making of the manufactue's name o logo as detailed below, o following statement: "Miami-Dade County Poduct Contol Appoved". IDENTIFICATION MARK FOR MISSION BARREL CLAY ROOF TILE (LOCATED UNDERNEATH TILE) 6. BUILDING PERMIT REQUIREMENTS 6.1 Application fo building pemit shall be accompanied by copies of the following: This Notice of Acceptance Any othe documents equied by the Building Official o applicable building code in ode to popely evaluate the installation of this system. Page 4 of 5

5 PROFILE DRAWING SANTAFÉ "MISSION BARREL" CLAY ROOF TILE END OF THIS ACCEPTANCE Page 5 of 5