SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107
|
|
- Diana Bond
- 6 years ago
- Views:
Transcription
1 SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA SPECIFICATION FOR PLATFORM RUBBING EDGE ASSEMBLIES FOR 69 TH ST TC, 40 TH ST, 34 TH ST, 2 ND ST, SPRING GARDEN MFSE STATIONS TABLE OF CONTENTS Specification Sections: Division 1: General Requirements o Section Submittals and Contractor Responsibilities Division 5: Metals o Section Miscellaneous Fasteners Division 6: Wood and Plastics o Section Drawings: o A1: Rubbing Edge Schedule o A2: Prefabricated High Density Solid Polythylene Rubbing Rail o A3: Sections and Details Schedule: Location Item Qty Thickness Height Total 69th Street 10'-0" Rubbing Edge Member and Hardware 1 1/2" 8" 72 5'-0" Rubbing Edge Member and Hardware 1 1/2" 8" 2 40th Street 10'-0" Rubbing Edge Member and Hardware 1 1/2" 9.5" 92 3'-0" Rubbing Edge member and Hardware 1 1/2" 9.5" 2 34th Street 10'-0" Rubbing Edge Member and Hardware 1 1/2" 9.5" 69 12'-0" Rubbing Edge member and Hardware 1 1/2" 9.5" 2 2nd Street 10'-0" Rubbing Edge Member and Hardware 1" 9.5" 20 10'-0" Rubbing Edge Member and Hardware 1" 5" 49 Spring 11'-0" Rubbing Edge Member and Hardware 1" 5" 1 Garden 5'-0" Rubbing Edge Member and Hardware 1" 5" 1 Note: Vendor is responsible for the fabrication of the polyethylene rubbing edge members as well as providing the attachment hardware. SEPTA shall install. DATE: December 2016 PROJECT: Misc. MFSE Stations Rub Rail
2 PART 1 GENERAL 1.01 Description SECTION SUBMITTALS AND CONTRACTOR RESPONSIBILITIES A. The work of this specification consists of the fabrication and delivery of polyethylene platform rubbing edge and all associated fasteners as specified herein. B. SEPTA shall be responsible for final installation Submittals A. General 1. The Contractor shall provide to SEPTA the required submittals within the timeframe specified in the purchase order and after the Contractor's receipt of Notice to Proceed. 2. The Submittals shall be reviewed by SEPTA's Project Manager. The results of each submittal review shall have the following status stamp: -NO EXCEPTIONS TAKEN -PROCEED AS NOTED; REVISE AND RESUBMIT FOR RECORD -DO NOT PROCEED; REVISE AND RESUBMIT -REJECTED -NOT APPLICABLE 3. Review and Processing shall not relieve the Contractor from responsibility for errors which may exist in the submitted data. 4. Submittals not in compliance with the Contract will be returned to the Vendor for revision. Any loss of time and additional costs associated with re-submittal(s) shall be the Contractor s responsibility. 5. Submittals that are marked "Proceed as Noted" are for the purpose of expediting procurement and/or fabrication of the intended work. The Contractor shall incorporate all corrections and resubmit to SEPTA within 10 working days the required copies of all submittals marked "Proceed as Noted." 6. The Contractor shall allow 10 working days for review and processing by SEPTA following its receipt of the submittals Substitutions A. Or Equal Substitutions 1. Restricted Items: Where items of equipment and/or materials are specifically identified in the Specifications or on the Drawings by a manufacturer's name, model or catalogue number, only such specific items may be used. When several materials are specified by name for one use, the Contractor may select any of those specified. Materials specified by manufacturer s trade name shall comply with the manufacturer s printed Specifications and data. 2. Equals Considered: Whenever a material or article required is specified or shown on the plans by using the name of the proprietary product or of a particular manufacturer or vendor, any material or article which will, in the opinion of SEPTA's Project Manager, perform adequately the duties imposed by general design will be considered equal and satisfactory provided material or article so proposed is of equal aesthetic, substance and function in SEPTA's Project Manager's opinion. It shall not be purchased or installed without SEPTA's Project Manager's written approval. "Or Equal" requests will be considered only when substantiated by the Contractor's submittal of data documenting the "or equal" nature of material or article within ten (10) calendar days after the date of receipt of Notice to Proceed. PART 2 PRODUCTS Division 1: General Requirements Submittals and Contractor Responsibilities Page 1 of 2
3 2.01 Not Used PART 3 EXECUTION 3.01 Packing and Shipping A. All items shall be shipped at one time as complete separate packages for each station location and labeled as such, with all components and installation hardware included. B. All components shall be packaged and shipped so as to protect the integrity and finish from any damage whatsoever. C. The Contractor shall contact SEPTA at least 48 hours prior to delivery Installation A. Installation shall be by SEPTA work forces. END OF SECTION Division 1: General Requirements Submittals and Contractor Responsibilities Page 2 of 2
4 PART 1 GENERAL 1.01 Description SECTION MISCELLANEOUS FASTENERS A. The Contractor shall be responsible for providing all fasteners and related accessories as required to fabricate, assemble and mount assemblies as shown on the Drawings and described herein. B. All loose fasteners and mounting hardware required for field assembly and or mounting shall be included. Loose fasteners and mounting hardware shall be boxed, labeled and keyed to an assembly drawing if applicable References A. American Society for Testing Materials (ASTM) 1. ASTM 967, Specification for Chemical Passivation Treatments for Stainless Steel Parts 2. ASTM F593, Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs 3. ASTM F594, Standard Specification for Stainless Steel Nuts PART 2 PRODUCTS 2.01 Rods, Nuts, and Washers A. Threaded rods shall be ASTM F593 3/8 Ø fully threaded with ASTM F594 nut and ASTM A240 washer. At Spring Garden location, threaded rods shall be provided to ensure a min of 6 embedment; at other stations a min. embedment of 4 is required. B. Stainless steel nuts and washers shall be sized appropriately for use with threaded rods. PART 3 EXCECUTION NOT USED END OF SECTION Division 5: Metals Miscellaneous Fasteners Page 1 of 1
5 PART 1 GENERAL 1.01 Description SECTION POLYETHYLENE PLATFORM RUBBING EDGE A. The work of this specification consists of the fabrication and delivery of polyethylene platform rubbing edge sections. B. The Contractor shall be responsible for all materials, labor and transportation required for delivery of complete assemblies to a location designated elsewhere in the Contract Documents. C. SEPTA shall be responsible for final installation Quality Requirements A. The platform edge strips shall be constructed as indicated on the drawings. All work shall be plumb and true and in conformance with the details or other pertaining information shown on the drawings or specified herein. All materials shall be transported, stored, handled and installed in conformance with the manufacturer's recommendations and instructions Submittals A. Provide sample of the material with a pre-drilled hole as shown on the drawings for the following: (1) 5 x8 ½ x1 B. Provide 3 wide samples to show thickness for the following: (1) 8"x1 ½ (1) 9 ½ x1 ½ (1) 9 ½ x1 C. Provide (1) set of shop drawings detailing the strips, i.e. lengths, hole locations and sizes, etc. Include material schedule. D. Provide (1) copy of product information for polyethylene strips. E. Submit manufacturer's standard warranty. PART 2 PRODUCTS 2.01 Acceptable Manufacturers A. Engineered Plastics, Inc./ 300 International Drive/ Williamsville, NY 14221/ B. ADA Solutions, Inc./PO Box 3/ N. Billerica, MA 01862/ Division 6: Wood and Plastics Page 1 of 2
6 C. Or Approved Equal 2.02 Polyethylene Platform Edge Strip A. All shapes, lengths, and holes shall be as indicated on the drawings. B. Material: Ultra-high Molecular Weight Polyethylene C. Color: Safety Yellow: 1. Color is based on OSHA recommendations from the Federal Standard 595 Paint Specification. 2. Available color formulas, FS13591-Yellow or FS13655-Blue Angels Yellow. 3. Color shall be integral throughout. D. The coefficient of thermal expansion in degrees Fahrenheit, tested in accordance to ASTM D696, shall not be greater than: 1. 0 to 75 : 1.1x10-4n inches per inch to 120 : 1.87x10-4n inches per inch 2.03 Fabrication A. The top surface of the edge strips shall be roughened by scarification to create a non-slip surface per ADA (Americans with Disabilities Act) Guidelines 1. The static coefficient of friction of the top surface shall be no less than 0.6. B. Tolerances 1. The straightness tolerance on the platform edge side of the rubbing board shall be 1/8" in a 16' section. 2. The variation in width of the board shall not be more than 1/16" in any length section. PART 3 EXECUTION 3.01 Packing and Shipping A. All items shall be shipped at one time as complete packages B. All components shall be packaged and shipped so as to protect the integrity and finish from any damage whatsoever. C. The Contractor shall contact SEPTA at least 48 hours prior to delivery Installation A. Installation shall be by SEPTA work forces. END OF SECTION Division 6: Wood and Plastics Page 2 of 2
STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS REVISION DATE SPECIFICATION # F-S-304_
More informationSECTION TIMBER FLOATS
SECTION 06210 PART 1 - GENERAL 1.01 SUMMARY A. This section covers furnishing and installing the timber float framing for the pile guide area, and all other components not specifically mentioned, necessary
More informationUNISTRUT CORPORATION GENERAL NOTES 1. THIS UNISTRUT SUPPORT SYSTEM IS DESIGNED TO SUPPORT A MAXIMUM UNIFORM LOAD OF PSF.
1. THIS SUPPORT SYSTEM IS DESIGNED TO 4. ALL CHANNEL & FITTINGS TO HAVE STANDARD 1. THIS SUPPORT SYSTEM IS DESIGNED TO 4. ALL CHANNEL & FITTINGS TO HAVE STANDARD 1. THIS SUPPORT SYSTEM IS DESIGNED TO 4.
More informationSOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA SPECIFICATION FOR CERAMIC TILE FOR 15 th STREET STATION
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 SPECIFICATION FOR CERAMIC TILE FOR 15 th STREET STATION TABLE OF CONTENTS Specification Sections: Division
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.
SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing
More informationSECTION SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.
SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationSECTION SHOWER AND DRESSING COMPARTMENTS
SECTION 10 21 16 SHOWER AND DRESSING COMPARTMENTS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes:
More informationSECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.
SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling hung compartments.
More informationSECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and install carbon steel or stainless steel alternating tread stair assemblies in accordance with the requirements
More informationSECTION ALTERNATING TREAD STEEL STAIRS
SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this
More informationK. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
More informationSECTION ORNAMENTAL ALUMINUM FENCING
SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationSECTION 2 DIVISION 05 METALS
SECTION 2 DIVISION 05 METALS DIVISION 5 - METALS Note: This is a guide for Designers only. Contents shall not be used in lieu of specifications as part of the Designer s Contract Documents. GENERAL DESIGN:
More information1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.
PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationSECTION C. Water Infiltration: Provide manufactured cupolas and dormers that do not allow water infiltration to cupola and dormer interiors.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Manufactured exterior cupolas. 2. Manufactured dormers. 3. Historical locomotive weather Vane. 1.2 PERFORMANCE REQUIREMENTS A. General:
More informationSECTION HANDRAILS AND RAILINGS. A. Section Metal Fabrications: Associated metal supports.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Handrails and guardrails B. Guardrails for hatches and openings. C. Safety barriers. D. Roof edge protection. 1.2 RELATED SECTIONS
More informationSECTION TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS. A. Solid composite phenolic toilet compartments and urinal screens.
SECTION 102113 TRESPA ATHLON SOLID COMPOSITE PHENOLIC TOILET PARTITIONS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Solid composite phenolic toilet compartments and urinal screens. 1.02 RELATED SECTIONS
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationC. Miscellaneous Metal Fabricators are specified elsewhere in Division 5.
SECTION 05 1200 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.01 SUMMARY A. Extent of structural steel work is shown on drawings, including schedules, notes and details to show size and location of members,
More information1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.
SECTION 05500- METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationSERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as
More informationFabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
SECTION - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this section.
More informationSECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS 1. PART 1 GENERAL 1.1 WORK INCLUDED: 1. Provide labor, material, equipment and services to furnish and install aluminum windows shown on drawings and specified herein. Window
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
More informationSECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.
More informationSECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
More informationSECTION DECORATIVE METAL FENCES AND GATES
SECTION 32 31 19 SPEC WRITER NOTE: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
More informationJAMISON SOUND DOOR SPECIFICATIONS VERTICAL SLIDING SOUND REDUCTION DOOR - STC 53 POWERED OPERATION
JAMISON SOUND DOOR SPECIFICATIONS VERTICAL SLIDING SOUND REDUCTION DOOR - STC 53 POWERED OPERATION PART 1 - GENERAL 1.1 APPLICABLE PUBLICATIONS: The publications listed below form a part of this specification
More informationSECTION INTERIOR STONE INTERIOR STONE
SECTION 04401- INTERIOR STONE 04401-1 PART ONE: GENERAL 1.1 Description INTERIOR STONE 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor/Vendor and shall be
More informationProduct Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
More informationSECTION ORNAMENTAL WELDED STEEL FENCING
SECTION 032300 ORNAMENTAL WELDED STEEL FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationSECTION STRUCTURAL REINFORCED POLYMER COMPOSITE PEDESTRIAN BRIDGE DECK
SECTION 06610 STRUCTURAL REINFORCED POLYMER COMPOSITE PEDESTRIAN BRIDGE DECK PART 1 GENERAL 1.1 SUMMARY A. A. This Section includes the requirements for furnishing and installing all Structural Reinforced
More informationSECTION TOILET COMPARTMENTS SPEC WRITER NOTES:
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 21 13 TOILET COMPARTMENTS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in
More informationSECTION EXTERIOR SUN SHADES
SECTION 10 71 13 EXTERIOR SUN SHADES USE THIS SECTION WHEN SPECIFYING C.R. LAURENCE 7700 SERIES ALUMINUM SUN SHADE SYSTEMS. THE CRL 7700 SERIES SUN SHADE SYSTEM IS A FIXED BAR GRILLE STYLE WITH A TAPERED
More informationPrivacy Plus Partitions
Privacy Plus Partitions WITH DuPont Corian solid surface SECTION 10172 PRIVACY PLUS PARTITIONS WITH DUPONT CORIAN SPECIFIER: THROUGHOUT THIS SPECIFICATION EDIT NOTE IS ISSUED TO IDENTIFY ITEMS WHICH SHOULD
More informationCITY OF FARGO SPECIFICATIONS SIGNING
SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary to complete
More informationSpecification Floor-To-Ceiling Solid Plastic Toilet Compartments
Specification Floor-To-Ceiling Solid Plastic Toilet Compartments PART 1 GENERAL 1.01 SUBMITTALS A. Plastic compartment work includes the following, where indicated: 1. Floor-to-ceiling compartments. B.
More informationSECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationSECTION ALTERNATING TREAD ALUMINUM STAIRS
SECTION 05 51 33.23- ALTERNATING TREAD ALUMINUM STAIRS PART 1- GENERAL 1.1 SCOPE OF WORK Fabricate and Install aluminum alternating tread stair assemblies in accordance with the requirements set forth
More informationSECTION SERVICE AND TELLER WINDOW UNITS
SECTION 08 56 59 SERVICE AND TELLER WINDOW UNITS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. See Pharmacy Service Window and Package
More informationDoor Hardware
08 71 00 Door Hardware Submittals 1. Door Hardware Schedule: Prepared by or under the supervision of supplier, detailing fabrication and assembly of door hardware, as well as procedures and diagrams. Coordinate
More informationSOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107
SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 SPECIFICATION FOR REQUIREMENTS TYPE MATERIAL BLANKET CONTRACT FOR CUSTOM FABRICATED, GALVANIZED AND POWDER-COATED
More informationSECTION CLIMBING WALLS
SECTION 13120-1 PART 1 - GENERAL 1.1 SUMMARY A. This section includes the following: 1. Custom Climbing Wall. B. Related Sections 1. Section Structural Steel 2. Section Rough Carpentry 3. Finishes 1.2
More informationSECTION METAL STAIRS
SECTION 05 51 00 METAL STAIRS PART 1 GENERAL 1.1 SUMMARY A. Section includes steel stair frame of structural sections, with closed risers; pan to receive concrete fill stair treads and landings; integral
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 0548 - PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationSECTION STAINLESS STEEL FLEXIBLE MESH PLANT SUPPORT SYSTEM. Show hidden Specifier Notes for best results
SECTION 32 94 00 STAINLESS STEEL FLEXIBLE MESH PLANT SUPPORT SYSTEM Show hidden Specifier Notes for best results PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Stainless Steel Wire Rope Assemblies
More informationSolid Plastic Tufftec 2.0 Lockers
Solid Plastic Tufftec 2.0 Lockers PART 1 GENERAL 1.01 SUBMITTALS Shop Drawings: Drawings shall be submitted showing individual locker construction and overall dimensions. Complete installation instructions
More informationNorthpointe Renovation EPN #1701 F/A Prroject #17027 September 8, 2017
SECTION 101423.16 - ROOM-IDENTIFICATION PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationKeuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.
SECTION 05 73 16 {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. PART 1 GENERAL 1.1 SUMMARY A. Section includes cable railing system, with architectural metal
More informationHDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION FB WEIS/POLY TOILET PARTITIONS
3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com PART 1 GENERAL HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION
More informationSECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware.
1 SECTION 08 4210 ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1. Lock cylinders
More informationPreassembled steel stairs with concrete-filled treads.
SECTION 055113 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
More informationH D P SOLID PHENOLIC FLOOR BRACED COMPARTMENTS SECTION FB TOILET PARTITIONS
3501 East La Palma Avenue - Anaheim, California 92806 PART 1 GENERAL Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com H D P SOLID PHENOLIC FLOOR BRACED COMPARTMENTS 1.1 RELATED DOCUMENTS:
More informationSECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION
PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB #
SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSECTION ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Summit tm Modular Railing System
SECTION 05720 ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Summit tm Modular Railing System PART 1 GENERAL 1.01 WORK INCLUDED A. Furnish and/or install supported glass stainless steel railings, glass
More informationSECTION DECORATIVE METAL FENCES AND GATES
Specification 32 31 19 BASTEEL PERIMETER SYSTEMS Citadel Security Fence System SECTION 32 31 19 DECORATIVE METAL FENCES AND GATES EDIT NOTE: This Document has been prepared by BASTEEL Perimeter Systems
More informationSECTION DECORATIVE METAL FENCES AND GATES
Specification 32 31 19 BASTEEL PERIMETER SYSTEMS Defiant Security Fence System SECTION 32 31 19 DECORATIVE METAL FENCES AND GATES EDIT NOTE: This Document has been prepared by BASTEEL Perimeter Systems
More informationSECTION ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Glenlake Modular Railing System
SECTION 05 5200 ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Glenlake Modular Railing System PART 1 GENERAL 1.01 WORK INCLUDED A. Furnish and/or install post supported stainless steel railings and components.
More informationPRODUCT SPECIFICATIONS - SERIES 1090
PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
More informationSECTION ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Casino Modular Railing System
SECTION 05 5200 ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Casino Modular Railing System PART 1 GENERAL 1.01 WORK INCLUDED A. Furnish and/or install stainless steel railings and components. 1.02 REFERENCE
More informationSECTION Temperature Change: 120 deg F, ambient; 180 deg F, material surfaces.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Handrails and guardrails. 1.2 PERFORMANCE REQUIREMENTS A. General: In engineering railings to withstand structural loads indicated, determine
More informationSECTION BLAST RESISTANT WINDOWS
SECTION 08 56 53 BLAST RESISTANT WINDOWS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. See VA Physical Security Design Manual for security
More information.1 American Institute of Steel Construction (AISC) Specifications for Steel Buildings AISC
05 12 00 STRUCTURAL STEEL FRAMING Page 1 of 3 1 General 1.1 SECTION INCLUDES.1 Structural steel framing and support members 1.2 RELATED SECTIONS.1 Section 05 50 00 Metal Fabrications 1.3 REFERENCES.1 American
More informationDIVISION 5 METALS SECTION STRUCTURAL STEEL
DIVISION 5 METALS SECTION 05 12 00 PART 1 GENERAL 1.01 SUMMARY A. Section Includes: All labor and materials required to furnish and install the structural steel shown on the Drawings and required by these
More informationModel # 800SM-PS3. 8/3/2016 Page 1 of 8
Model # 800SM-PS3 8/3/2016 Page 1 of 8 /3/2016 Page 2 of 8 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
More informationSECTION FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES
SECTION 081613 FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationCITY OF FARGO SPECIFICATIONS SIGNING
SECTION 4300 SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary
More informationSTRUCTURAL STEEL FRAMING
SECTION 05 12 00 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Section includes 1. Structural steel framing 2. Structural steel framing required for support and framing of rooftop mechanical
More informationSECTION SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS
PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
More informationB. Shop Drawings: Include plans, elevations, sections, details, and attachments to other work.
SECTION 055116 - METAL FLOOR PLATE STAIRS PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information2004 MASTER FORMAT SECTION Façade Panels
2004 MASTER FORMAT SECTION 07 44 00 Façade Panels Hunter Douglas Façades Aluminum Façade Systems PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationCOMMERCIAL ITEM DESCRIPTION PARTITIONS, TOILET, COMPLETE
[INCH-POUND] August 22, 1997 SUPERSEDING RR-P-1352C February 8, 1989 COMMERCIAL ITEM DESCRIPTION PARTITIONS, TOILET, COMPLETE The General Services Administration has authorized the use of this commercial
More informationSECTION Summit Phenolic Lockers (Solid Phenolic Lockers)
SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with
More informationSECTION METAL FLOOR PLATE STAIRS
SECTION 05513 - METAL FLOOR PLATE STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION COLD-FORMED METAL TRUSSES
SECTION 054400 COLD-FORMED METAL TRUSSES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members.
SECTION 10155 TOILET COMPARTMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Plastic laminate partitions. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Concealed steel support members. B. Section
More informationCOUNTY OF KINGS KINGS COUNTY JAIL EXPANSION PHASE III
SECTION 101419 - DIMENSIONAL CHARACTER SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationHOTEL SPECIFICATION SECTION 08100
Part 1 General HOTEL SPECIFICATION SECTION 08100 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified including, but not limited
More informationARCHITECTURAL SPECIFICATIONS
ARCHITECTURAL SPECIFICATIONS CIG JAN PRODUCTS LTD VISUAL DISPLAY BOARDS Part 1-General 1.01 RELATED DOCUMENT A. The provision of the General Conditions. Supplementary Conditions and the Sections included
More informationTo Contact PS DOORS:
MODELS Stainless Steel (SS) Powder Coat Yellow (PCY) Hot Dipped Galvanized (GAL) TABLE OF CONTENTS PAGE Warranty Information General Paired LSG Information Installing the Support Channels 3 Installing
More informationSECTION ANCHOR SYSTEMS
SECTION 05 05 00 ANCHOR SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Anchor bolts. B. Requirement: 1. Furnish all materials, labor and equipment required to provide anchor systems not specifically
More informationArchitectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification
More informationOctaform Quick Liner Wall & Ceiling Panels Guide Specification CAN Page 1
Guide Specification CAN Page 1 This master guide specification Section is intended for use when specifying plastic panelling. This section includes performance, and descriptive type specifications; edit
More informationStudent Services & Classroom Addition
SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDivision MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL
Division 11-7010 MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Contractor shall provide medical equipment support systems as indicated on the drawings. Support systems shall be as required
More informationPLASTIC LAMINATED COMPARTMENTS SECTION TOILET PARTITIONS
PHONE (734) 467-8711 Phone: 714.666.0108 / 714.666.0109 FAX (734) 467-8710 www.weisrobart.com Fax: 714.666.0110 3501 E. La Palma Ave., Anaheim, CA 92806 3737 S. VENOY RD. P.O. BOX 130 www.weisrobart.com
More informationSECTION ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Monaco tm Modular Railing System
SECTION 05720 ARCHITECTURAL ORNAMENTAL HANDRAILS AND RAILINGS Monaco tm Modular Railing System PART 1 GENERAL 1.01 WORK INCLUDED A. Furnish and/or install supported glass stainless steel railings, glass
More informationCommission No Section
Commission No. 1511 Section 05120-1 PART ONE - GENERAL 1.1 DESCRIPTION A. Work Included: Structural steel and grout. Furnish, fabricate, mark for erection identification, pack, crate, or otherwise properly
More informationCOLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100
COLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100 Part 1 General 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified,
More informationReport of: RailBlazers Aluminum Railing System Post Attachment to Concrete British Columbia Building Code - Part 9
Report of: RailBlazers Aluminum Railing System Post Attachment to Concrete 2012 British Columbia Building Code - Part 9 2012 Ontario Building Code - Part 9 2015 National Building Code of Canada - Part
More information