SPECIFICATION GUIDE. thin glazed brick
|
|
- Lester Armstrong
- 6 years ago
- Views:
Transcription
1
2 clé has partnered with a classic artisan studio to create a glazed brick of simple integrity. begin with an honest and recycled clay body then finish with hand-ground glazes selected for their modern aesthetic. clé exclusive is a testament to tile making dexterity and an answer to the demand for an edgier more industrial subway tile. you will love them for their form and use them for their function. clé exclusive contact@cletile.com 415/
3 general description our clé exclusive tile is a series of glazed ceramic brick tile, by clé, that is double fired (to over 2100F*) available in a variety of sizes, colors, and finishes and are designed for residential and architectural uses. they may be installed using most industry accepted systems including pre-cast panels. *custom brick may be produced at other temperatures and with other processes. nominal sizes modified standard ( 2-1/2"x8"x1/2" ) 90 corner piece is available ( the return is 3-5/8" ) available trim standard specifications clé exclusive tile tile shall be selected by the architect/designer/owner from manufacturer s standard sizes, shapes and glazes; and shall meet the requirements of ANSI as special purpose tile; ASTM C , grade exterior, type TBX, for physical properties; and ASTM class exterior for properties of finish. most units will meet PCI specifications, but need to be requested as such if required. note: Interior/exterior specification. ok for freeze thaw & for wet applications. note: some glazes produced for custom applications may be crazed for decorative effects or to obtain certain color/characteristics and will not meet the crazing requirements of ASTM clé exclusive contact@cletile.com 415/
4 availability clé exclusive tile is made to order and therefore subject to production limitations and order volume fluctuations. For purposes of specification, a lead time of 8-10 weeks is sufficient in most cases. check with clé for verification of delivery. color variation clé exclusive tile colors vary from brick to brick, some more than others. these variations are intentional, resulting from our particular production methods and our choice of raw materials. when specifying clé exclusive thin glazed brick tile, if color consideration is paramount, always work from a sampling of 3 or more bricks, which represent the range of color you can expect on the job. crazing crazing refers to the hairline cracks which may occur in the glaze surface of brick after firing and is common in hand crafted tile. some glazes produced for the clé exclusive tile are crazed to achieve certain colors and/or decorative effects. to minimize the possibility of staining clé recommends using a penetrating sealer or grout release. If sealer or release is required please test a small section following the sealer/release manufacturer s instructions. size variation due to shrinkage from wet to fired tile in the manufacturing process, our bricks are subject to size variation. the thickness is 5/8" and can vary, along with other specified dimensions. please expect 6 tiles per square foot for a 2-1/2x8" tile. this allows for a 3/8" grout requirement. installation installation methods should conform to the tile council of america handbook for ceramic tile installation (current edition). brick from several different cartons should be mixed to achieve the best overall blend of color. other systems are available and the manufacturer s recommendations should be followed. clé exclusive contact@cletile.com 415/
5 ACCEPTABLE INSTALLATION METHODS FOR THIN BRICK SUBSTRATE APPLICATION THIN BRICK INSTALLATION METHOD THICK SET THIN SET MODULAR PANELS PREFABRICATED PANELS wood or steel exterior notes 1, 2, 4, and 5 notes 1, 3, 6, and 7 notes 1, 2, 5 and 7 notes 1, 2, 5 and 7 stud framing interior notes 1, 2, and 4 notes 1, 3, and 7 Notes 1, 2 and 7 notes 1, 2 and 7 masonry or exterior notes 2, and 4 note 3 note 2 note 2 concrete interior notes 2, and 4 note 3 note 2 note 2 see below for notes referenced in table. 1. maximum deflection of L/360 is recommended for wall stud framing. maximum deflection of L/240 is permitted for walls by the international building code (IBC) when rigid finishes like thin brick are applied. for interior adhered veneer applications supported by wood floors, the IBC limits the vertical deflection of the flooring system to L/ maximum allowable variation of ¼ in. in 10 ft (6 mm in 3.05 m) from plane. 3. acceptable only when surface is bondable and variation from plane is no more than ¼ in. 10 ft (6 mm in 3.05 m). 4. use only with reinforcing lath or mesh in scratch coat. 5. use exterior-grade sheathing. wood stud framing is required by the IBC and the international residential code (IRC) to have water-resistive barrier with the equivalent performance of two layers of grade D paper. 6. acceptable only when cement backer board is used as substrate. 7. for IBC, the system must comply with the alternative design requirements of the building code requirements for masonry structures (TMS 402) since the installation method does not include metal lath. grouting it is recommended that a 3/8" grout joint be used for clé exclusive tiles. smaller grout spacing can be used including a tight joint ; however, additional tiles will be required to cover a given area. narrow grout spaces accentuate tile irregularities. note: epoxy grout is not recommended however, should you choose to use epoxy grout, grout release is required to maintain the original surface. use a grout bag to minimize excess grout and decrease cleanup. work clean! maintenance minimal maintenance is required. mild soaps should be sufficient for most cleaning. test any cleaners before general use. durability considerations depending on specific site conditions, glazed thin brick are subject to wear over time. to determine the suitability for specific applications, each clé glaze has been tested and ranked on the MOHS scale and classified according to hardness and recommended use. light colors and matte glazes are a better choice in heavy use areas rather than dark colors and gloss finished glazes because scratches on the tile surface are less apparent. a means must be provided for people to clean abrasive materials off their shoes before walking on a glazed brick floor. clé exclusive contact@cletile.com 415/
6 design: eddie lee design clé exclusive 415/
specification guide FARMHOUSE BRICK a clé exclusive
specification guide FARMHOUSE BRICK a clé exclusive all the dazzle of the beloved zellige tile grounded with the integrity of brick. think of this thin clay brick tile coated with a white variegated glaze
More informatione astern e a r t h e n wa re by c lé
S P E C I F I C AT I O N e astern e a r t h e n wa re by c lé clé is pleased to announce the introduction of our newest collection of timeless glazed terra cotta tiles - eastern earthenware. inspired by
More informationMETROBRICK meets the strictest standards - above TBX grade thin brick.
W W W. M E T R O T H I N B R I C K. C O M METROBRICK meets the strictest standards - above TBX grade thin brick. To be used with the following systems: Precast Concrete Panels, Tilt-up Concrete Panels,
More informationDIVISION: MASONRY SECTION: MANUFACTURED BRICK MASONRY SECTION: MANUFACTURED STONE MASONRY REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3685 Reissued 09/2017 This report is subject to renewal 09/2018. SECTION: 04 71 00
More informationKey Words: adhered veneer, brick, panels, prefabrication, thick set, thin brick, thin set.
Technical Notes 28C - Thin Brick Veneer - Introduction [Jan. 1986] (Reissued Jan. 2001) Abstract: This Technical Notes is an introduction to thin brick veneer, and covers the brick units, several application
More informationSPECIFICATION GUIDELINE
Environmental StoneWorks specification guideline should be used to assist design professionals in the preparation of projects. Edit and delete items that may not be applicable. Verify all referenced section
More informationFinish Flooring- Hard Flooring Materials
Finish Flooring- Hard Flooring Materials The most desirable types of flooring by designers and building owners Types of Hard Flooring Materials Concrete Stone Ceramic Tiles Quarry Tiles Bricks and Brick
More information1.3 Work shall include all reinforcement and accessories necessary to complete installation.
CERAMIC TILING GENERAL INFORMATION 1.1 Ceramic mosaic tile floors and bases, glazed wall tile wainscots and walls, and marble thresholds. 1.2 Installation will typically be with latex-portland cement mortar
More informationDesign of Adhered Masonry Veneers for Multi-storey Buildings
Design of Adhered Masonry Veneers for Multi-storey Buildings Presented by Dr. Mark D. Hagel, PhD., P.Eng Executive Director at the Alberta Masonry Council Mark Hagel PhD. in civil engineering, BSc. in
More informationXTREME-BOND INSTALLATION SYSTEM
XTREME-BOND FOR THIN-STONE VENEER Weather-resistant resistant Superior bonding & flexural strengths Exceptional sag resistance Meets requirements of Type S mortar Pre-blended for quality consistency from
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR ANCHORED MASONRY VENEER SYSTEM WITH POLYSTYRENE FOAM PLASTIC BACKING EC 021-2014 (Adopted
More informationSTRENGTH AND DURABILITY OF THE INSTALLED STONE
BEAUTY STRENGTH DURABILITY At Cast Natural Stone, we build each and every stone to stand up to the most brutal weather conditions. And with our manufacturing and headquarters located in Wisconsin, we know
More informationSPECIFICATION GUIDELINE
SPECIFICATION GUIDELINE Environmental Stoneworks Corporate Office 6300 East Stapleton Drive South Denver, CO 80216 Phone (303) 309-3040 Fax (303) 309-3059 www.estoneworks.com Environmental Stoneworks specification
More informationHammerStone Manufactured stone veneers for commercial & residential applications
HammerStone Manufactured stone veneers for commercial & residential applications Veneer Stone Specification Guide Section 04711: Manufactured Stone Veneer Use this specification guide for each individual
More informationMETROBRICK meets the strictest standards - above TBX grade thin brick. To be used with the following systems: Precast Concrete Panels, Tilt-up
W W W. M E T R O T H I N B R I C K. C O M METROBRICK meets the strictest standards - above TBX grade thin brick. To be used with the following systems: Precast Concrete Panels, Tilt-up Concrete Panels,
More informationSpec Master 5/7/ For each product requiring color and texture selection, provide full size samples.
SECTION 04812 (042012) MECHANICALLY ATTACHED BRICK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationADHERED MASONRY VENEER SYSTEMS
ADHERED MASONRY VENEER SYSTEMS Old Problems and New Challenges Robert C. Haukohl, PE The Masonry Society is a registered Provider with the American Institute of Architects Continuing Education Systems.
More informationDARE TO BE BOLD ALTERATIONS GLAZED PORCELAIN REVEAL IMAGING
DARE TO BE BOLD ALTERATIONS GLAZED PORCELAIN REVEAL IMAGING ALTERATIONS DARK WEAVE AND LINEN ALTERATIONS is an authentic fabric-look tailored to design fashionable spaces. Illustrative graphics reveal
More informationDIVISION: MASONRY SECTION: MANUFACTURED BRICK MASONRY SECTION: MANUFACTURED STONE MASONRY REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1364 Reissued 10/2018 This report is subject to renewal 10/2019. SECTION: 04 71 00
More informationGold Bond BRAND Gypsum Sheathing
BRAND 09 06 29 16 00/NGC 43/NGC brand is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant
More informationSECTION ARCHITECTURAL PRECAST CONCRETE. C. Section Joint Sealers: Perimeter joints with sealant and backing.
SECTION 03451 ARCHITECTURAL PRECAST CONCRETE PART 1 GENERAL 1.01 SECTION INCLUDES A. Architectural precast concrete wall panels; with integral insulation. B. Supports, anchors, and attachments. C. Intermediate
More informationB. Related Sections: 1. Division 07 Section "Joint Sealants" for sealing of expansion, contraction, control, and isolation joints in tile surfaces.
SECTION 093000 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationICC-ES Evaluation Report Reissued November 2014 This report is subject to renewal November 2016
ESR-1215* Reissued November 2014 ELDORADO STONE, ELDORADO BRICK AND ELDORADO ADOBE VENEERS 1.0 EVALUATION SCOPE Compliance with the following codes: 2015 International Building Code (IBC) 2015 International
More informationBuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
More informationDARE TO BE BOLD INFLUENCE COLORBODY PORCELAIN TRUEDGE REVEAL IMAGING
DARE TO BE BOLD INFLUENCE COLORBODY PORCELAIN TRUEDGE REVEAL IMAGING INFLUENCE STEEL, IRON & BRASS Influence offers an exclusive design exhibiting a linear metal graphic for a contemporary metal effect.
More informationStudent Services & Classroom Addition
SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationNarrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations Narrow Modular Pavers are part of the California Architectural
More informationTHEORETICAL COLORBODY PORCELAIN & GLAZED CERAMIC MOSAIC WITH REVEAL IMAGING FLOOR
FLOOR With a nod to minimalist simplicity, Theoretical by American Olean is inspired by the modern, industrial look of cement. Reimagined with subtle graphic variation for added richness and depth, its
More informationSPECIAL SPECIFICATION 2043 Brick Veneer on MSE Wall
2004 Specifications CSJ 0196-02-120 SPECIAL SPECIFICATION 2043 Brick Veneer on MSE Wall 1. Description. This Item shall govern for the furnishing of the materials and construction of brick veneers on abutment
More informationTBX Grade THIN BRICK
TBX Grade THIN BRICK WWW.METROTHINBRICK.COM THIN BRICK SYSTEMS METROBRICK manufactures TBX Grade Architectural Thin Brick to be used with the following systems: Precast Concrete Panels, Tilt-up Concrete
More informationXP500 THIN VENEER ADHESION MORTAR SUPERIOR WORKABILITY & ADHESION. MAXIMUM PRODUCTIVITY. DIVISION MORTAR (VM-07)
DIVISION MORTAR XP00 THIN VENEER ADHESION MORTAR SUPERIOR WORKABILITY & ADHESION. MAXIMUM PRODUCTIVITY. SPEC MIX Thin Veneer Adhesion Mortar XP00 is a premium preblended polymer modified thin set mortar
More informationCTIOA REPORT (Rev )
CERAMIC TILE INSTITUTE OF AMERICA, INC. 12061 Jefferson Blvd., Culver City, CA 90230-6219 Phone (310) 574-7800 * Fax: (310) 821-4655 * Email: ctioa@earthlink.net Fed. I.D. #95-4401962 www.ctioa.org www.thetiledoctor.com
More informationSECTION CERAMIC and QUARRY TILE
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 09 30 13 CERAMIC and QUARRY TILE A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specification
More informationWHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED.
WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED. Build walls and ceilings with a strong base, sturdy reinforcements and much more with Phillips extensive line of high quality products. As a single source
More informationCTIOA REPORT
CERAMIC TILE INSTITUTE OF AMERICA, INC. 12061 Jefferson Blvd., Culver City, CA 90230-6219 CTIOA REPORT 2002-4-25 SUBJECT: Direct Bond Thin Set Method Glass Mosaic Tile Over Exterior and Interior Portland
More informationSECTION GYPSUM BOARD
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 29 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationACCEPTANCE CRITERIA FOR PRECAST STONE VENEER
www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council ACCEPTANCE CRITERIA FOR PRECAST STONE VENEER AC51 Approved February 2008 Effective March 1, 2008 (Editorially
More informationCONCRETE STAIRS Note:
With the increased use of concrete tile and stone over the past decade, there has been an increase in demand for installing concrete tile or stone on stairs. Historically, these types of installations
More informationBrick Masonry. Best Practices Guide
Brick Masonry Best Practices Guide 1. Brick 2. Brick Blending 3. Wall Ties 4. Flashing 5. Steel Lintels 6. Weep Holes 7. General Recommendations Content The information and suggestions contained in this
More informationSECTION MANUFACTURED MASONRY VENEER
TM Dutch Quality Stone 18012 Dover Road Mt. Eaton, OH 44659 Tel: (330) 359-7866 Fax: (330) 359-5990 e-mail: info@dutchqualitystone.com website: www.dutchqualitystone.com SECTION 04 73 00 MANUFACTURED MASONRY
More informationGLAZED CERAMIC PARKWAY
GLAZED CERAMIC PARKWAY PARKWAY GLAZED CERAMIC floor wall countertop The Sleek Look of Stained Concrete at an Affordable Price Bring the trendy, modern day look of stained concrete into your space at a
More informationCHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10
CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES 283 Chapter 10 FUNCTIONAL REQUIREMENTS FUNCTIONAL REQUIREMENTS 10.1 PLASTERWORK Workmanship i. All workmanship must be within the tolerances
More informationACCEPTANCE CRITERIA FOR PRECAST STONE VENEER PREFACE
ICC EVALUATION SERVICE, INC. Evaluate P Inform P Protect ACCEPTANCE CRITERIA FOR PRECAST STONE VENEER AC51 Approved February 2008 Effective March 1, 2008 Previously approved October 2007, January 2001,
More informationfor Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Mortar-Set Concrete Tiling Installations Large Scale CalArc Pavers are part of the California Architectural
More informationDARE TO BE BOLD MODERN FORMATION COLORBODY PORCELAIN STONEWARE TRUEDGE REVEAL IMAGING STEPWISE *
DARE TO BE BOLD MODERN FORMATION TRUEDGE REVEAL IMAGING STEPWISE * PHOTO FEATURES MODERN FORMATION IN CANYON TAUPE UNPOLISHED AND TEXTURED MODERN FORMATION MODERN FORMATION by Marazzi draws inspiration
More informationCHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES
CONTENTS 10.1 PLASTERWORK 10.2 2 ND AND 3 RD FIX FINISHES FUNCTIONAL REQUIREMENT 10.1 Plasterwork Workmanship Design Technical Manual TS-011-09-010412 i. All workmanship must be within defined tolerances
More informationSECTION TILING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic Tile for floor applications. B. Ceramic Tile for wall applications. C. Ceramic accessories. D. Ceramic trim. E. Non-ceramic trim. 1.02 RELATED REQUIREMENTS
More informationMETROBRICK meets the strictest standards - higher than TBX grade thin brick. To be used with the following systems:
W W W. M E T R O T H I N B R I C K. C O M METROBRICK meets the strictest standards - higher than TBX grade thin brick. To be used with the following systems: Precast Concrete Panels, Tilt-up Concrete Panels,
More informationStone and Masonry Veneer
Stone and Masonry Veneer R703.7 Stone and masonry veneer, general. Stone and masonry veneer shall be installed in accordance with this chapter, Table R703.4 and Figure R703.7. These veneers installed over
More informationMANUFACTURER S SPECIFICATION
MANUFACTURER S SPECIFICATION Eldorado Stone Corporation PO Box 489 Carnation, WA 98014 Tel: (800) 925-1491 Fax: (425) 333-4755 e-mail: general@eldoradostone.com website: www.eldoradostone.com SECTION 04730
More informationCONCRETE MASONRY VENEERS TEK 3-6C
An information series from the national authority on concrete masonry technology CONCRETE MASONRY VENEERS TEK 3-6C Construction (2012) INTRODUCTION In addition to its structural use or as the exterior
More informationSECTION CEMENT BOARD SUPPORTED ADHERED MASONRY VENEER. 2. Installation materials including adhesives, mortars, and pointing mortars.
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying cement board supported adhered masonry. The Specifier needs to edit these guide specifications
More informationGlobally Proven Construction Solutions. Adhered Stone DÉCOR STONE. Snap for more information.
Globally Proven onstruction Solutions dhered Stone ÉOR STONE TM TM Snap for more information. MSONRY VENEER MORTR patented polymer fortified mortar designed specifically for the installation of stone,
More informationBULLETIN FROM THE FIRST COAST CHAPTER ICC~BOAF
FIRST COAST CHAPTER INTERNATIONAL CODE COUNCIL (ICC) AND BUILDING OFFICIALS ASSOCIATION OF FLORIDA, INC. (BOAF) SERVING BAKER, BRADFORD, CLAY, DUVAL, NASSAU, PUTNAM, ST. JOHNS & UNION COUNTIES BULLETIN
More informationSECTION CERAMIC TILE. B. Ceramic tile wall finishes including standard and custom designs.
SECTION 09 30 13 CERAMIC TILE PART 1 GENERAL 1.1 SECTION INCLUDES A. Ceramic tile floor and base finishes. B. Ceramic tile wall finishes including standard and custom designs. 1.2 REFERENCES A. ANSI/TCNA
More informationSECTION CEMENTITIOUS SHEATHING
SECTION 06 16 63 CEMENTITIOUS SHEATHING SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this Section for exterior sheathing as a backup
More informationNarrow Modular Pavers (NMP) for Sand-Set Installations
The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Sand-Set Installations Narrow Modular Pavers are part of the California Architectural Paver line
More informationFLOOR. CHORD COLORBODY PORCELAIN with REVEAL IMAGING
Cover photo features Chord Forte Grey 24 x 24 floor tile and 12 x 24 decorative accent in a chevron pattern on the floor. Above photo features Chord Rhythm Brown 24 x 24 floor tile and 12 x 24 decorative
More informationGLAZED CERAMIC PARKWAY
GLAZED CERAMIC PARKWAY PARKWAY GLAZED CERAMIC floor wall countertop The Sleek Look of Stained Concrete at an Affordable Price Bring the trendy, modern day look of stained concrete into your space at a
More informationTHIN PORCELAIN TILE TPT
THIN PORCELAIN TILE TPT TPT At the end of this program, participants will be able to: Understand what is a Thin Porcelain Tile (TPT) Know how (TPT) is made and its benefits Identify the various types of
More informationSample Specifications
Sample Specifications Below is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry tile
More informationGENERAL PROVISIONS
09 00 03 GENERAL PROVISIONS A. For renovation projects, consider the building s character and existing finishes. All material patches should blend as closely as possible. Some buildings on campus have
More informationTHIN PORCELAIN TILE TPT
THIN PORCELAIN TILE TPT TPT At the end of this program, participants will be able to: Understand what is a Thin Porcelain Tile (TPT) Know how (TPT) is made and its benefits Identify the various types of
More informationCTIOA REPORT
CERAMIC TILE INSTITUTE OF AMERICA, INC. 12061 Jefferson Blvd., Culver City, CA 90230-6219 Phone (310) 574-7800 * Fax: (310) 821-4655 * Email: ctioa@earthlink.net Fed. I.D. #95-4401962 www.ctioa.org www.thetiledoctor.com
More informationGENERAL PROVISIONS
09 00 03 GENERAL PROVISIONS A. For renovation projects, consider the building s character and existing finishes. All material patches should blend as closely as possible. Some buildings on campus have
More informationThin Architectural Splitface Block Veneer Specification Guide
Thin Architectural Splitface Veneer System with AccuTab Technology R Thin Architectural Splitface Block Veneer Specification Guide Section 04711: Manufactured Concrete Veneer Use this specification guide
More informationFLOOR COVERING Arch206 BC-II Spring 2016
FLOOR COVERING Arch206 BC-II Spring 2016 Floor coverings 1. Subfloors 2. Selection criteria for floor coverings 3. Ceramic and Stone Tile Flooring 4. Stone Panel Flooring 5. Terrazzo Flooring 6. Carpet
More informationCalifornia Architectural Pavers for Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: California Architectural Pavers for Mortar-Set Concrete Tiling Installations Stepstone, Inc. also manufactures California Architectural
More informationCRAFTSMAN. Porcelain Floor & Wall Tile
CRAFTSMAN Porcelain Floor & Wall Tile CRAFTSMAN nspired by the hard working and highly skilled craftsman that shaped the buildings we live and work in today. Embodied in a nostalgic time era at the turn
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2400 - PORTLAND CEMENT PLASTER PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationDARE TO BE BOLD CHATEAU RESERVE COLORBODY PORCELAIN STONEWARE TRUEDGE REVEAL IMAGING STEPWISE
DARE TO BE BOLD COLORBODY PORCELAIN STONEWARE TRUEDGE REVEAL IMAGING STEPWISE PHOTO FEATURES IN SHADOW MOUNTAIN is the latest introduction into Marazzi s expansive wood-look tile collection. Offered in
More informationSECTION BRICK FLOORING
SECTION 09 63 13 BRICK FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brick flooring
More informationavante Freedom of expression
avante GLAZED Porcelain Floor tile & Glazed Ceramic Wall and mosaic Tile WITH REVEAL IMAGING TM Freedom of expression Avante in Bianco 10 x 14 and 3 x 6 wall tile. Avante Subtle tones from nature inspired
More informationTHEORETICAL COLORBODY PORCELAIN & GLAZED CERAMIC MOSAIC WITH REVEAL IMAGING FLOOR
FLOOR With a nod to minimalist simplicity, Theoretical by American Olean is inspired by the modern, industrial look of cement. Reimagined with subtle graphic variation for added richness and depth, its
More informationLimited Exterior Masonry Assessment Roosevelt Elementary School
Limited Exterior Volume 2 of 2 November 29. 2007 Produced for: Medford Public Schools Medford, Oregon In Consultation with: 710 NE 21 st Avenue, Suite 200, Portland, Oregon 97232 P: 503.517.0283 F: 503.517.0285
More informationSECTION QUARRY TILE. A. American National Standards Institute ANSI A108.3.
SECTION 09330 QUARRY TILE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 07900 - Joint Sealers. 3. 09310 - Ceramic Tile. 4. 15421 - Drains and Cleanouts. 1.02 REFERENCES
More informationLATICRETE Masonry LATICRETE 3701
LTIRETE Masonry Veneer Mortar patented polymer fortified mortar designed specifically for the installation of stone, thin brick and manufactured stone masonry veneers. Our unique formulation provides exceptional
More informationTechnical Bulletin. CTIOA Technical Committee
CTIOA Technical Committee Technical Bulletin Technical Bulletin No. 2010-3-23 Revision 0 March 23, 2010 Scale: None Page 1 of 7 Tile Exterior Veneer Lath, Scratch, Brown Coat Tensile and Shear Bond Strength
More informationGlazed wall & counter tile. Rittenhouse square
Glazed wall & counter tile Rittenhouse square rittenhouse square glazed wall & counter wall countertop Just like the famous Philadelphia park, there is no question this collection is simply timeless. Classic
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: WATER RESISTIVE BARRIERS/WEATHER BARRIERS SECTION: AIR BARRIERS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1993 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00
More informationPART 1-SAWN THIN VENEER GENERAL
PART 1-SAWN THIN VENEER GENERAL WORK INCLUDED: All labor and material for the furnishing and installing of exterior or interior stone building veneer. RELATED WORK: Masonry Contractor shall include building
More information1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) glass mesh. It has an exceptionally hard, durable surface that can withstand prolonged exposure to moisture.
BRAND 09 29 28 00/NGC 1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) brand is a rigid substrate made of Portland cement, aggregate and glass mesh. It has an exceptionally hard, durable surface that can withstand
More informationOLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide. RobinsonBrick.com
OLD BRICK ORIGINALS KILN-FIRED THIN BRICK VENEER Installation Guide RobinsonBrick.com OLD BRICK ORIGINALS THIN BRICK VENEER Page 2 INTRODUCTION Check local building codes for proper installation guidelines
More informationinfusion COLORBODY PORCELAIN FLOOR & GLAZED CERAMIC WALL TILE
infusion COLORBODY PORCELAIN FLOOR & GLAZED CERAMIC WALL TILE infusion Classic, sophisticated style of artisanal tweed outfits a modern atrium. Warm linen tones line a contemporary boardroom. Infusion
More informationSample Specifications
Sample Specifications Below is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry tile
More informationDeer Ridge Consulting, Inc.
Deer Ridge Consulting, Inc. Code Compliance Research Report 505 Deer Ridge Lane Ararat, VA 24053 Office: 276-755-9162 Fax: 866-441-1054 www.deer-ridge-consulting.com Subject: NCFI 12-008 Spray Polyurethane
More informationSample Specification
Sample Specification Enclosed is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry
More information2. In moist areas, portland cement plaster should be used if a more permanent material is not within budget limits.
UDIVISION 9 FINISHES 09 00 00 FINISHES 09 20 00 PLASTER AND GYPSUM BOARD PLASTER 1. Major partitions are to extend to underside of structure as required by code. Allow for structural deflection. Provide
More informationCSI GUIDE Countertops
CSI GUIDE Countertops Part 1 General 1.0 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification Sections, apply
More informationWALL SYSTEMS ( Ref: The Building Illustrated, Ching, Francis DK )
WALL SYSTEMS ( Ref: The Building Illustrated, Ching, Francis DK ) 1.0 Comparative wall systems Wood stud walls * walls are normally 2x4, but may be 2x6. * studs are spaced 16. * studs carry vertical loads.
More informationDESIGN AND CONSTRUCTION STANDARDS April 2011
09 00 03 GENERAL PROVISIONS A. For renovation projects, consider the building s character and existing finishes. All material patches should blend as closely as possible. Some buildings on campus have
More informationDESIGN AND CONSTRUCTION STANDARDS November 2010
09 00 03 GENERAL PROVISIONS A. For renovation projects, consider the building s character and existing finishes. All material patches should blend as closely as possible. Some buildings on campus have
More informationICC ES SYSTEM SYSTEM. Trusted DIVISION: 07 SECTION: AND FINISH REPORT HOLDER: ICC-ES Evaluation. Reissued 08/2016.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 2562 Reissued 08/206 This report is subject to renewal 08/208. DIVISION: 07 00 00
More informationWALL RETROSPACE GLAZED CERAMIC
WALL Cover and above photos feature RetroSpace Modern White wall tile and diamond accent on the backsplash with Natural Quartzite Tahitian Cream on the countertops. Mid-Century Modern Essentials Reinvent
More informationTHEORETICAL COLORBODY PORCEL AIN FLOOR & GL AZED CERAMIC MOSAIC WITH REVEAL IMAGING FLOOR
FLOOR With a nod to minimalist simplicity, Theoretical by American Olean is inspired by the modern, industrial look of cement. Reimagined with subtle graphic variation for added richness and depth, its
More informationIn the design development phase, submit finish and material selections to Facilities Management Planning Group for review.
09 00 00 FINISHES 09 01 00 Maintenance of Finishes 09 01 20 Maintenance of Plaster and Gypsum Board 09 01 20.91 Plaster Restoration 09 01 30 Maintenance of Tiling 09 01 30.91 Tile Restoration 09 01 50
More informationInstallation Guide Wall Panels
Installation Guide Wall Panels Jointless or Dry-Stacked Installation (Read Prior to installation) The MStone system is a jointless / dry-stacked installation where panels and corners fit tightly together
More informationGYPSUM BOARD AND PLASTER
CHAPTER 25 SECTION 2501 GENERAL 2501.1 Scope. 2501.1.1 General. Provisions of this chapter shall govern the materials, design, construction and quality of gypsum board, lath, gypsum plaster and cement
More informationGENERAL SHALE NATURAL THIN ROCK VENEER Installation Guide. GeneralShale.com
GENERAL SHALE NATURAL THIN ROCK VENEER Installation Guide GeneralShale.com GENERAL SHALE NATURAL THIN ROCK VENEER Page 2 INTRODUCTION - TABLE OF CONTENTS Check local building codes for proper installation
More informationDivision 09 FINISHES TABLE OF CONTENTS
Division 09 FINISHES TABLE OF CONTENTS 09 1000 GENERAL... 3 A. RELATED SECTIONS... 3 B. MAINTENANCE OF FINISHES... 3 C. PUBLIC AREAS... 3 D. CUTTING AND PATCHING... 3 E. CLEANING... 3 F. RECOMMENDED FLOORING
More information