Part of the Sikaplan WT Membrane System
|
|
- Bernard Terry
- 6 years ago
- Views:
Transcription
1 System Product Data Sheet Edition: Identification no: System Sikaplan WT Tape 200 System Part of the Sikaplan WT Membrane System Product Description Sikaplan WT Tape 200 is a high performance sealing system based on modified polyolefin (FPO) membrane tape, with excellent adhesion properties and a range of special Sikadur epoxy adhesives for use in different applications and conditions. The system allows direct connection to polyolefin (FPO) waterproofing membranes Sikaplan WT 1200, 2200, 5200 and 6200 by heat welding. Sikaplan WT Tape 200 is used to connect Sikaplan WT membranes to the substrate at perimeter edges and terminations, plus for the creation of sealed compartments for compartment waterproofing systems, whilst maintaining a high quality watertight seal. Uses Creation of watertight compartments and connection of the Sikaplan WT membrane system to the substrate at perimeter edges and terminations in many different structures and applications including: Tunnels and culverts Hydro electric power plants Sewage treatment plants Basements Water retaining structures Around steel and concrete pipe penetrations Characteristics / Advantages Good adhesion between the tape and the adhesives, no activation of the tape is required on site Fast and easy to install Suitable for installation on dry and damp concrete surfaces Performs well within a wide range of temperatures Good adhesion to many different substrate materials Available with normal and rapid hardening grades of the adhesive Root penetration resistant 1 1/8
2 Product Data Form Appearance/ Colours Sikaplan WT Tape 200: Flexible black coloured tape with a grey signal layer Sikadur-Combiflex CF Adhesive and Sikadur -31 CF Adhesive: Light grey Packaging Sikaplan WT Tape 200: Thickness: 2 mm Width: 200 mm Rolls of 20 m Storage Sikadur -Combiflex CF Adhesive and Sikadur -31 CF Adhesive: 6 kg units (A+B) ready to mix Plus in bulk for larger projects: 20 kg unit part A 10 kg unit part B Storage Conditions / Shelf Life Sikadur -Combiflex CF Adhesive and Sikadur -31 Adhesive: 24 months from date of production if stored properly in undamaged, unopened, original sealed containers, in cool and dry conditions, at temperatures between +5 C and +30 C. Sikaplan WT Tape 200: 12 months from date of production if stored properly in undamaged, unopened, original sealed packaging, in cool and dry conditions, at temperatures between +5 C and 30 C. Opened and unprotected rolls must be used immediately. Technical Data Chemical Base Service Temperature Sikadur -Combiflex CF Adhesive and Sikadur -31 CF Adhesive: Modified, solvent free, filled 2-part epoxy resins Sikaplan WT Tape 200: Modified flexible Polyolefin (FPO) with excellent adhesion characteristics Sikaplan WT Tape 200 System: -30 C min. to +40 C max. in wet conditions -30 C min. to +60 C max. in dry conditions Mechanical / Physical Properties Bond Strength Sikaplan WT Tape 200 System (Sikaplan WT Tape 200 bonded with Sikadur - Combiflex CF Adhesive) Substrate Concrete (dry) Concrete (mat / damp) Bond Strength > 2 N/mm 2 (failure in concrete) > 2 N/mm 2 (failure in concrete) Steel (blastcleaned) > 5 N/mm 2 Peel Strength Sikaplan WT Tape 200 System: Sika System test: Two sections of Sikaplan WT Tape 200 bonded to each other with Sikadur -Combiflex CF Adhesive and Sikadur -31 CF. Results: Strength: > 6 N/mm 2 2/8
3 Resistance Chemical Resistance System Information System Structure Sikaplan WT Tape 200 System (Sikaplan WT Tape 200 bonded with Sikadur -Combiflex Adhesive and Sikadur -31 CF) has: Long term resistance to: Water, lime water, cement pore water, seawater, salt solutions, domestic sewage, bitumen (according to EN 1548), bitumen emulsion coatings (staining is possible) etc. Temporary resistance to: Light fuel oils, petrol, diesel, dilute alkalis and mineral acids, ethanol, methanol etc. These indications of chemical resistance can be used to determine the suitability of the sealing system for different applications. Regarding any other specific short term chemical resistance information, please contact your local Sika Technical Service Department for specific advice. The Sikaplan WT Tape 200 system consists of a modified flexible Polyolefin (FPO) waterproofing tape and a Sikadur epoxy adhesive. One flexible tape is used: Sikaplan WT Tape 200: Alternative Sikadur adhesives are available: Sikadur -Combiflex CF Adhesive (Types N and R) Sikadur -31 CF (Types N, R and S) Note: The system configuration as described must be fully complied with and must not be changed. Application Details Consumption Sikaplan WT Tape 200: Sikadur -Combiflex CF Adhesive per metre length Tape width Adhesive thickness Adhesive consumption* 20 cm 1 mm ~ 1.2 kg/m *The consumption can vary dependent on site conditions (i.e. substrate surface roughness, size of aggregate etc.) Substrate Quality Concrete, Natural Stone, Cement Mortar and Render: Substrate must be clean, free from oil, grease, cement laitance and any loose or friable particles. Age of concrete: Typically at least 3-6 weeks dependent on the mix design, curing and environmental conditions. Structural Steel and Stainless Steel: Clean, free from oil, grease, rust and mill scale. Polyester, Epoxy, Ceramics and Glass: Clean, free from oil and grease. 3 3/8
4 Substrate Preparation Concrete, Natural Stone, Cement Mortar and Render: These substrates must be mechanically prepared e.g. by blastcleaning, to be free from any cement laitance, damaged concrete, old surface treatments or coatings and then any loose or friable particles must be removed, in order to achieve a contaminant free, open textured surface. Structural Steel: Blastcleaning or equivalent mechanical means followed by thorough vacuuming for dust removal. Avoid dew point conditions during application. Stainless Steel: Light grinding followed by thorough vacuuming for dust removal. Avoid dew point conditions during application. Polyester, epoxy, ceramics, glass: Light abrasive roughening with fine sand-paper, followed by thorough vacuuming for dust removal. Do not apply to siliconised, or silicone oil treated substrates (act as a de-bonding agent). Avoid dew point conditions during application. Application Conditions / Limitations Substrate Temperature Ambient Temperature Substrate Moisture Content Relative Air Humidity Dew Point Sikadur -Combiflex CF Adhesive and Sikadur -31 CF Adhesive: Type Slow: from +25 C to +45 C Type Rapid: from +5 C to +15 C Type Normal: from +10 C to +30 C Sikadur -Combiflex CF Adhesive and Sikadur -31 CF Adhesive: Type Slow: from +25 C to +45 C Type Rapid: from +5 C to +15 C Type Normal: from +10 C to +30 C Cementitious substrates: Dry or mat-damp with no standing water. When applied to mat-damp concrete, brush the adhesive well into substrate. 85% max. (at +25 C) Avoid condensation on the substrates due to dew point conditions. The substrate temperature must be at least 3 Kelvin above the dew point. 4 4/8
5 Application Instructions Mixing Sikadur -Combiflex CF Adhesive and Sikadur -31 CF Adhesive Part A : B = 2 : 1 parts by weight or volum Pre-batched units: Mix parts A+B together for at least 3 minutes with a mixing spindle attached to a slow speed electric drill (max. 300 rpm), until the material becomes smooth in consistency and a uniform grey colour. Avoid aeration while mixing. Then pour the whole mix into a clean container and stir again for approx. 1 more minute at low speed to keep air entrapment at a minimum. Mix only that quantity which can be used within its pot-life. Bulk packaging, not pre-batched: First stir each part (A and B) thoroughly individually. Then add the parts (A + B) together in the correct proportions into a suitable mixing container and continue to mix correctly using an electric low speed mixer as outlined above for the pre-batched units. 5 5/8
6 Application Method / Tools Application of the Tape: Where necessary, clean the surface of the Sikaplan WT Tape 200 with a clean dry or slightly damp cloth. Use water and no solvent for this cleaning. Check the integrity of the Sikaplan WT Tape 200 to ensure that there is no damage from storage or transport (e.g. heavy scratches). Remove any damaged sections if necessary. Masking tape can be used on both outer sides of the bonding area before applying the adhesive, to ensure a neat detail. Apply the mixed Sikadur adhesive on the prepared substrate, using a suitable brush, trowel or spatula. If the concrete substrate is damp, force the adhesive firmly into the substrate. The layer thickness of adhesive should be 2 mm and minimum 220 mm wide. Apply the Sikaplan WT Tape 200 within the pot-life (useable or open time) of the adhesive. Press the tape firmly, without trapping air, into the adhesive using a suitable roller or trowel. The adhesive should be squeezed out on both sides of the tape. For vertical or overhead application, the Sikaplan WT Tape 200 must be supported until the adhesive has hardened, in order to prevent it peeling away from the adhesive and to ensure a good bond. Let the first layer of the Sikadur -Combiflex CF Adhesive or Sikadur -31 CF Adhesive stiffen and begin to harden before the top layer is applied. Apply the top layer of adhesive at a thickness of ~ 2 mm along the edge of the tape for at least 4 cm, producing a covering layer which tapers outwards to almost zero. The adhesive top layer may be smoothed with a brush using a dilute detergent. Allow the adhesive to start hardening first. Note: Do not use detergent if any additional coating is to be applied. 6 6/8
7 Connection Joints in the Sikaplan WT Tape 200: Tape ends are connected by hot air thermal welding. The welding area must be prepared by slight roughening of the bond area surfaces with Scotch-brite pads or fine sandpaper. Roughen the tapes only in the welding area. Overlaps have to be min mm. Welding parameters, such as speed and temperature must be established with trials on site, prior to any welding works. Basic settings: C Hand welding in the overlap area is carried out in three steps. 1. Spot weld the overlap 2. Pre-welding: weld the rear overlap area so that a 20 mm flap (using a 20 mm nozzle) remains for the final welding 3. Final welding: weld the remaining flap. Guide the roller at a distance of 20 mm parallel to the air outlet of the welding nozzle. Roll the pressure roller fully across the seam. Connection of Sikaplan WT membranes to Sikaplan WT Tape 200: The Sikaplan WT Tape 200 and Sikaplan WT membrane must be clean and dry, ready for hot- air welding. The Sikaplan WT membrane can be welded to the Sikaplan WT Tape 200 at the earliest, 24hrs after of the application of the Sikaplan WT Tape 200 system. To ensure the optimum seam quality, seam preparation is always required before hotair welding. The welding area of the Sikaplan WT Tape 200 must be prepared by roughening the surface with Scotch-brite pads or fine sand-paper. Use Sarnafil T Prep (yellow) only for the seam preparation and cleaning of Sikaplan WT membranes, as described in the Sikaplan WT FPO Sheet Waterproofing Membranes Application Manual. Welding parameters, such as speed and temperature must be established through trials on site, prior to the commencement of any welding works. Please also refer to the Sikaplan WT FPO Sheet Waterproofing Membranes Application Manual Cleaning of Tools Clean all tools and application equipment with Sika Colma-Cleaner immediately after use. Hardened / cured material (adhesive) can only be removed mechanically. 7 7/8
8 Pot-life Sikadur-Combiflex CF Adhesive (6 kg) Temperature Type Normal Type Rapid +5 C - ~ 60 minutes +10 C ~ 125 minutes ~ 45 minutes +15 C ~ 95 minutes ~ 25 minutes +23 C ~ 50 minutes C ~ 25 minutes - Sikadur -31 CF Adhesive (0.2 kg) Type Slow Type Normal Type Rapid +5 C - - ~ 60 minutes +10 C - ~ 145 minutes ~ 55 minutes +23 C ~ 135 minutes ~ 55 minutes ~ 40 minutes +30 C - ~ 35 minutes C ~ 70 minutes C ~ 45 minutes - - If larger quantities are being mixed the temperature of the adhesive will increase due to the chemical reaction, resulting in a reduced pot-life. Notes on Application / Limitations The Sikaplan WT Tape 200 must be protected from mechanical damage. Value Base All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. Local Restrictions Please note that as a result of specific local regulations the performance of this product may vary from country to country. Please consult the local Product Data Sheet for the exact description of the application fields. Health & Safety Please refer to the Material Safety Data Sheet. Legal Notes The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika s current knowledge and experience of the products when properly stored, handled and applied under normal conditions. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The proprietar rights of this parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request, or can be obtained at Sika Sverige AB Domnarvsgatan 15 Box 8061 SE Spånga Sweden Tel Fax /8
Part of the Sikaplan WT Membrane System
Product Data Sheet Edition: 07.2011 Version 2011-10-19 Sikaplan WT Tape 200 Sikaplan WT Tape 200 Part of the Sikaplan WT Membrane System Product Description Uses Characteristics/ Advantages The Sikaplan
More informationConstruction. High performance joint sealing system. Product Description. System Data Sheet Edition _1. 1 Sikadur Combiflex SG system 1/8
System Data Sheet Edition 2012-05_1 High performance joint sealing system Construction Product Description Uses High performance joint sealing system for construction, expansion and connection joints as
More informationConstruction. High performance joint sealing system. Product Description 1 1/9. Product Data Sheet Edition 29th October 2015
Construction Product Data Sheet Edition 29th October 2015 Sikadur-Combiflex SG system High performance joint sealing system Product Description The Sikadur-Combiflex SG system is a high performance joint
More informationConstruction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description
Product Data Sheet Version 2015-02-12 Identification no: 02 07 03 02 003 0 000002 Sikadur -Combiflex CF Adhesive Sikadur -Combiflex CF Adhesive 2-part epoxy adhesive Part of the Sikadur -Combiflex System
More informationConstruction. Sikadur -Combiflex SG System High performance joint sealing system. Positioning. Product Data
Product Data Sheet Version Nos.: 04/13 (replaces 02/13) Only to be applied by a Sika Approved Contractor Sikadur -Combiflex SG System High performance joint sealing system Construction Positioning Description
More informationSealArm Tape TPE. Building & Joint Sealants T E C H N I C A L D A T A S H E E T. Uses. Features and Benefits
Product Description is a high performance Joint Tape system for expansion, it can be used for connection joints as well as for cracks, when fixed to the joint, allows irregular and high movement in more
More informationSikadur -Combiflex CF Adhesive Type N and Type R are thixotropic two part adhesives based on epoxy resins and fillers.
Construction Product Data Sheet Edition 14/08/2017 Identification no: 020703020030000002 Sikadur -Combiflex CF Adhesive Sikadur -Combiflex CF Adhesive 2-part epoxy adhesive Part of the Sikadur -Combiflex
More informationConstruction. Type N and Type R. 2-part epoxy adhesive Part of the Sikadur -Combiflex System. Product Description. Tests
Product Data Sheet Edition 05/01/2009 Identification no: 02 07 03 02 003 0 000002 Type N and Type R Sikadur -Combiflex CF Adhesive Type N and Type R Construction 2-part epoxy adhesive Part of the Sikadur
More information3-part thixotropic epoxy patching mortar
Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41
More informationTECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG
TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG Sikadur 31 is a two component solvent-free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - Normal and
More informationProduct Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages
Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages
More informationSikadur- Combiflex SG. High Performance Crack, Construction and Expansion Joint Waterproofing System
Sikadur- Combiflex SG High Performance Crack, Construction and Expansion Joint Waterproofing System Sikadur-Combiflex SG System High performance joint sealing system for construction, expansion and connection
More informationPRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)
PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and
More informationSikadur -31 DW Rapid (VP)
Product Data Sheet Edition 21/05/2015 Identification no: 020204030010000038 Sikadur -31 DW Rapid (VP) 2-part epoxy adhesive tested for drinking water contact Product Description Uses Characteristics /
More informationPRODUCT DATA SHEET Sikadur -31 DW
PRODUCT DATA SHEET 2-PART EPOXY ADHESIVE WITH APPROVAL FOR DRINKING WATER CONTACT DESCRIPTION 2-part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated
More informationPRODUCT DATA SHEET Sikadur -32 Normal
PRODUCT DATA SHEET 2-COMPONENT STRUCTURAL EPOXY BONDING AGENT PRODUCT DESCRIPTION is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers,
More informationTECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG
TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG Sikadur -31 is a two component solvent free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - 31CF Normal
More informationConstruction. 2-part epoxy impregnation resin. 1 Sikadur /5. Product Data Sheet Edition No. 01 (October 2015) Sikadur -330.
Product Data Sheet Edition No. 01 (October 2015) 2-part epoxy impregnation resin Construction Description Uses Characteristics / Advantages Test Approval / Standards Product Data is a two-part, thixotropic
More informationProduct Data Sheet Product n Description Uses tio tru Characteristics / C Advantages Tests Approval / Standards
Product Data Sheet Edition 01/02/2012 Identification no: 01 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Construction Product Description Uses Characteristics / Advantages
More information2-part epoxy impregnation resin
Product Data Sheet Edition 22/11/2006 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description Sikadur -330 is a two part, solvent free, thixotropic
More informationCHARACTERISTICS / ADVANTAGES
PRODUCT DATA SHEET 2-part epoxy impregnation resin PRODUCT DESCRIPTION Sikadur -330 is a two-part, solvent free epoxy based impregnating resin / adhesive. USES Impregnation resin for SikaWrap fabric reinforcement
More informationSegmental bridge adhesive
Product Data Sheet Edition 16/07/2014 Identification no: 02 02 04 03 001 0 000004 (Template for local translation, only for internal use) Segmental bridge adhesive Construction Product Description Uses
More informationConstruction. Sikadur Part Epoxy Impregnation Resin. Product Data Sheet Version 04/03/2011(Corporate edition 02/09/2010)
Product Data Sheet Version 04/03/2011(Corporate edition 02/09/2010) 2-Part Epoxy Impregnation Resin Product is a two part, thixotropic epoxy based impregnating resin / Description adhesive. Construction
More informationConstruction. Adhesive for bonding Carbon Fibre & Steel reinforcement. Product Description. Tests
Product Data Sheet Edition 10/12/2014 Identification no: 02 04 01 04 001 0 000001 Sikadur -30 Adhesive for bonding Carbon Fibre & Steel reinforcement Construction Product Description Uses Characteristics
More informationConstruction. Adhesive for bonding reinforcement. Product Description. Tests. Product Data Sheet Edition 16 December 2014
Product Data Sheet Edition 16 December 2014 Sikadur -30 Adhesive for bonding reinforcement Product Description Sikadur -30 is a thixotropic, structural two part adhesive, based on a combination of epoxy
More informationSikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.
Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin
More informationConstruction. 3-part cement and epoxy combination micro mortar for surface sealing. Product Description 1 1/5. Tests
Product Data Sheet Edition 29/11/2007 Identification no: 02 03 02 01 002 0 000002 SikaGard -720 EpoCem ZA 3-part cement and epoxy combination micro mortar for surface sealing Construction Product Description
More informationConstruction. 2-part epoxy impregnation resin. 1 Sikadur /6
Product Data Sheet Edition 05/01/2009 Identification no: 02 04 01 04 001 0 000006 2-part epoxy impregnation resin Construction Description Uses Characteristics / Advantages Test Approval / Standards Product
More information3-component epoxy self-smoothing screed
Construction Product Data Sheet Edition 26/07/2016 Identification no: 01 08 01 02 050 0 000017 3-component epoxy self-smoothing screed Product Description Uses Characteristics / Advantages Product Data
More informationMethod Statement Sikadur-Combiflex SG System
Method Statement Sikadur-Combiflex SG System Sika Services AG Storage Place: Sika Intranet BU Contractors Key Words: Joint waterproofing system, construction joints, expansion joints, crack repair, FPO
More informationConstruction. 2-part epoxy impregnation resin. Product Description. Product Data. Tests. Form. Product Data Sheet Edition 4 March 2015
Construction Product Data Sheet Edition 4 March 2015 2-part epoxy impregnation resin Product Description is a two part, thixotropic epoxy based impregnating resin / adhesive. Uses Impregnation resin for
More informationSikafloor -161 is an economic, two part, solvent free, low viscosity epoxy resin, suitable for use under hot climate condition.
Product Data Sheet Edition 05.08 Identification no: Provisional Sikafloor -161 2-part epoxy primer, levelling mortar, intermediate layer and mortar screed Construction Product Description Sikafloor -161
More information3-Part Epoxy Grouting System for Pile Capping
Product Data Sheet Edition: 10/10/2012 Identification no. Version no: GCC Sikadur -42 PC Sikadur -42 PC 3-Part Epoxy Grouting System for Pile Capping Product Description Uses Characteristics / Advantages
More informationAppearance /Colours Resin - part A: transparent, liquid Hardener - part B: transparent, liquid Packaging. Pre-proportioned 5.
Product Data Sheet Edition 30/08/2012 Sikafloor -160 2-part solvent free epoxy primer & binder, modular Sikafloor system Construction Product Description Sikafloor -160 is a two part, low viscosity epoxy
More informationConstruction. 2-part water based protective epoxy coating. Product Description. Product Data. Tests. Form
Product Data Sheet Edition 16/07/2007 Identification no: 02 08 01 01 014 0 000000 Sikagard -67 2-part water based protective epoxy coating Construction Product Description Sikagard -67 is a water based,
More informationSikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.
Product Data Sheet Edition 02/09/2010 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 23/08/2006 Identification no: 01 05 01 01 005 0 000001 Sikaflex -11 FC + 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics
More informationConstruction. One component cementitious mortar fibre reinforced for flexible waterproofing. Product Description. Product Data. Form.
Product Data Sheet Edition 12/12/2014 Identification no: 02 07 01 01 001 0 000180 Sikalastic -1K Sikalastic -1K One component cementitious mortar fibre reinforced for flexible waterproofing Construction
More informationConstruction. 2-part epoxy impregnation resin. Product Description. Product Data 1 1/6. Tests. Form. Storage
Product Data Sheet Edition 2011-10_1 2-part epoxy impregnation resin Construction Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for SikaWrap fabric reinforcement
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 31/10/2006 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages
More informationMethod Statement Sika Dilatec System
Method Statement Sika Dilatec System PVC-based waterproofing and sealing System BU Contractors Storage Place: Sika Intranet BU Contractors Key Words: Joint Waterproofing System, PVC sealing tapes, construction
More informationWaterproofing and Damp-proofing Cementitious Slurry
Product Data Sheet Edition: 01/10/2012 Identification no. Version no: GCC SikaTop Seal-107 SikaTop Seal-107 Waterproofing and Damp-proofing Cementitious Slurry Product Description Uses SikaTop Seal-107
More informationConstruction. Adhesive for bonding reinforcement. Product Description. Tests
Product Data Sheet Edition 02/09/2010 Identification no: 02 04 01 04 001 0 000003 Sikadur -30 LP Adhesive for bonding reinforcement Construction Product Description Uses Characteristics / Advantages Sikadur
More informationSikafloor -264 is a two part, economic, solvent-free coloured epoxy resin, suitable for use under hot climate condition.
Product Data Sheet Edition 05.08 Identification no: Provisional Sikafloor -264 2-part epoxy roller and seal coat Construction Product Description Sikafloor -264 is a two part, economic, solvent-free coloured
More informationConstruction. Fully bonded FPO sheet membrane waterproofing system for basement and other below ground structures. Product Description.
Product Data Sheet Version 2014-05-27 Identification no: 020704103000000001 SikaProof A SikaProof A Fully bonded FPO sheet membrane waterproofing system for basement and other below ground structures Construction
More information2-part epoxy impregnation resin
Product Data Sheet Edition 21/05/2015 Identification no: 020206040010000006 2-part epoxy impregnation resin Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for
More informationLiquid applied polyurea hybrid membrane
Product Data Sheet Edition 07/08/2008 Identification no: 02 06 07 01 001 0 000015 Sikalastic -842 BG Liquid applied polyurea hybrid membrane Product Description Sikalastic -842 BG is a two part, highly
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 15/11/2005 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Construction Product Description Uses Characteristics / Advantages
More information2-part epoxy primer, levelling mortar, intermediate layer and mortar screed
Construction Product Data Sheet Edition 21/11/2016 Identification no: 02 08 01 02 007 0 000004 Sikafloor -161 Sikafloor -161 2-part epoxy primer, levelling mortar, intermediate layer and mortar screed
More information1-part polyurethane pourable self levelling floor joint sealant
Product Data Sheet Edition 29/03/2007 Identification no: 02 05 01 01 018 0 000001 1-part polyurethane pourable self levelling floor joint sealant Construction Product Description Uses Characteristics /
More information2-part self smoothing epoxy coating, highly chemically and mechanically resistant
Product Data Sheet Edition 01/01/2014 Identification no: 02 08 01 02 019 0 000010 Sikafloor -381 2-part self smoothing epoxy coating, highly chemically and mechanically resistant Construction Product Description
More informationRoofing. Sarnacol Adhesive for Insulation Boards. Product Description. Product Data. Polyurethane-based humidity-hardening one-pack adhesive
Roofing Product Data Sheet Edition 06.2016 Identification no: 020945072000000006 Version no. 01 Sarnacol 2162 Adhesive for Insulation Boards Roofing Product Description Uses Characteristics / Advantages
More information2-part water dispersed epoxy coating
Product Data Sheet Edition 21/07/2008 Identification no: 01 08 01 01 014 0 000001 2-part water dispersed epoxy coating Construction Product Description Sikagard -Wallcoat N is a two part, coloured, water
More informationSikagard -63 N is a total solid (acc. test method of Deutsche Bauchemie), two part epoxy resin coating.
Product Data Sheet Edition 19/07/2012 Identification no: 02 08 01 01 0 004 000001 Sikagard -63 N 2-part epoxy protective coating Construction Product Description Sikagard -63 N is a total solid (acc. test
More informationPRODUCT DATA SHEET Sikafloor -264 HC
PRODUCT DATA SHEET 2-PART EPOXY ROLLER AND SEAL COAT DESCRIPTION is a two part, economic, solvent-free coloured epoxy resin. USES may only be used by experienced professionals. Roller coat for concrete
More informationConstruction. 1-part floor joint sealant. Product Description. Product Data. Tests. Form. Storage
Product Data Sheet Edition 19/09/2011 Identification no: 01 05 01 01 005 0 000001 Sikaflex Floor Sikaflex Floor 1-part floor joint sealant Product Description is a moisture curing 1-part elastic sealant
More informationPrimer and Moisture Control for Wood Floor Bonding with Elastic SikaBond Adhesives on Difficult Substrates
Construction Product Data Sheet Edition: 29/05/2013 Identification no: Version no: GCC Sika Primer MB+ Sika Primer MB+ Primer and Moisture Control for Wood Floor Bonding with Elastic SikaBond Adhesives
More information1-part high performance sealant for flooring
Product Data Sheet Edition 26/07/2007 Identification no: 02 05 01 01 005 0 000001 Sikaflex PRO-3 WF 1-part high performance sealant for flooring Construction Product Description Uses Characteristics /
More informationSpray applied waterproofing membrane
Product Data Sheet Edition: 13/01/2015 Identification no: 02 07 02 03 001 0 000041 Sikalastic -851 Spray applied waterproofing membrane Construction Product Description Uses Characteristics / Advantages
More informationConstruction. 1-part high performance sealant for flooring. Product Description. Environmental Information. Product Data Sheet Edition _1
Product Data Sheet Edition 2012-03_1 1-part high performance sealant for flooring Product Description Sikaflex PRO 3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance.
More informationConstruction. 2-part epoxy primer. Product Data
Construction Product Data Sheet Edition 2 May 2013 Sikafloor -161 2-part epoxy primer Product Description Sikafloor -161 is an economic, two part, low viscosity epoxy resin for the use where substrate
More informationConstruction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)
System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for
More informationPRODUCT DATA SHEET Sikafloor -81 EpoCem New HC
PRODUCT DATA SHEET 3-PART CEMENT AND EPOXY COMBINATION MORTAR FOR SELFSMOOTHING FLOOR SCREEDS OF 1.5 TO 3 MM DESCRIPTION is a three part, epoxy modified cementitious, fine textured mortar for self smoothing
More informationPRODUCT DATA SHEET Sikafloor -264 HC
PRODUCT DATA SHEET 2-PART EPOXY ROLLER AND SEAL COAT DESCRIPTION is a two part, economic, solvent-free coloured epoxy resin. USES may only be used by experienced professionals. Roller coat for concrete
More informationConstruction. 1-part elastic joint sealant and multipurpose adhesive. Product Description
Product Data Sheet Edition 28/02/2012 Identification no: 01 05 06 01 150 0 000001 Sikaflex -11 FC + Sikaflex -11 FC + 1-part elastic joint sealant and multipurpose adhesive Construction Product Description
More informationTECHNICAL DATA SHEET SIKABOND AT METAL GREY 300CC
TECHNICAL DATA SHEET SIKABOND AT METAL GREY 300CC SikaBond AT Metal is based on a new type of hybrid polymer. AT (Advanced Technology) is a combination of the powerful Sika polyurethane (PU) and modified
More informationPRODUCT DATA SHEET Sikafloor -242 LC
PRODUCT DATA SHEET 2-PART VERSATILE COLORED EPOXY RESIN SYSTEM DESCRIPTION is a two part, multi-purpose, high build, coloured epoxy resin. USES may only be used by experienced professionals. Roller, textured
More information1-part polyurethane sealant for building joints
Product Data Sheet (Temporary) Edition 03/2010 Sikaflex -Construction (AP) 1-part polyurethane sealant for building joints Product Description Sikaflex -Construction (AP) is a one part, moisture curing,
More informationPRODUCT DATA SHEET Sikadur -42 HE
PRODUCT DATA SHEET 3-PART, HIGH PERFORMANCE EPOXY GROUTING SYSTEM PRODUCT DESCRIPTION is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures
More informationConstruction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description
Product Data Sheet Edition 17/08/2011 Identification no: 02 08 03 03 001 0 000003 Sika Level 100 Sika Level 100 Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with
More information2-part, electrostatically conductive epoxy coating
May 2009 Sikafloor -220 W Conductive 2-part, electrostatically conductive epoxy coating Construction Product Description Sikafloor -220 W Conductive is a two part, water dispersed, epoxy resin with a high
More informationSikafloor -161 HC is an economic, two part, solvent free, low viscosity epoxy resin.
Product Data Sheet Version 15/06/2015 (Indonesia edition 1/2007) Sikafloor -161 HC 2-Part Epoxy Primer, Levelling Mortar, Intermediate Layer and Mortar Screed Construction Product Description Uses Characteristics
More informationConstruction. Sikadur -42 (au) High strength pourable epoxy resin grout. Product Datasheet Edition 4 March Description. Uses.
Sikadur -42 (au) High strength pourable epoxy resin grout Description Uses Advantages Storage and Shelf Life Instructions for Use is a 3-component pourable or castable grout based on a solvent free epoxy
More informationConstruction. Two-part Epoxy Roller and Seal Coat. Product Data Sheet Edition No. 01 (October 2015) Sikafloor -264 HC. Product Description
Product Data Sheet Edition No. 01 (October 2015) Two-part Epoxy Roller and Seal Coat Construction Product Description is a two part, economic, solvent-free colored epoxy resin. Uses Roller coat for concrete
More informationWater resistant bonding agent and mortar additive
Product Data Sheet Edition 2011-10_1 Water resistant bonding agent and mortar additive Construction Product Description is a modified Styrene Butadiene Emulsion to be mixed with cement (neat) or cement
More informationHigh performance, flexible cementitious tile adhesive for thin bed application
Product Data Sheet Edition 05.11.2008 Revision no.: 1 Identification no: 01 07 01 01 001 0 000071 Sika Ceram-205 T (Sika Ceram 201) High performance, flexible cementitious tile adhesive for thin bed application
More informationPRODUCT DATA SHEET Sikafloor -161
PRODUCT DATA SHEET 2-PART EPOXY PRIMER, LEVELLING MORTAR AND INTERMEDIATE LAYER DESCRIPTION is an economic, two part, low viscosity epoxy resin. Suitable for use in hot and tropical climatic conditions.
More informationEN R4 High Strength High Build Concrete Repair Mortar
Product Data Sheet Edition 28th February 2018 Sika MonoTop-612 N EN 1504-3 R4 High Strength High Build Concrete Repair Mortar Construction Product Description Sika MonoTop-612 N is a cement-based, one
More informationProduct Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging
Product Data Sheet Version Nos.: 0414 SikaFuko Swell-1 Hydrophilic, swellable hose for sealing construction joints in watertight structures Construction Positioning Description Uses Swellable and injectable
More informationSpray applied polyurea membrane
Product Data Sheet Edition 2011-10_1 (formerly known as Resitect 5000) Spray applied polyurea membrane Construction Product Description Uses Characteristics / Advantages Product Data is a two-part, elastic,
More informationSikafloor -264 HC is a two part, economic, solvent-free coloured epoxy resin.
Product Data Sheet Version 31/01/2014 (Indonesia editon 1, 2007) Sikafloor -264 HC 2-Part Epoxy Roller and Seal Coat Construction Product Description Uses Characteristics / Advantages Form Sikafloor -264
More information1-part elastic joint sealant and multipurpose adhesive
Product Data Sheet Edition 28/09/2011 Identification no: 02 05 01 01 005 0 000001 1-part elastic joint sealant and multipurpose adhesive Sikaflex -11 FC + is a one part, moisture curing, elastic joint
More informationTECHNICAL DATA SHEET SIKALASTIC-1K
TECHNICAL DATA SHEET SIKALASTIC-1K Sikalastic -1K is a one component, highly elastic, cementitious fibre-reinforced mortar for the flexible waterproofing of concrete structures. It can be used for the
More information1-part Elastic Sealants for Joints Exposed to Chemicals
Product Data Sheet Edition 01 March 2017 1-part Elastic Sealants for Joints Exposed to Chemicals Product Description / Uses is a one part, moisture curing, elastic joint sealant which is used in areas
More informationNon-sag, ultra low modulus, neutral cure silicone sealant for pavements
Product Data Sheet Edition:21/02/2012 Identification no: 020505052020000001 Sikasil 728 NS Sikasil -728 NS Non-sag, ultra low modulus, neutral cure silicone sealant for pavements Construction Product Description
More informationHighly Chemical Resistant Laminate System. Sika Asplit VEL is 2 part, glass fabric reinforced, vinyl-ester based coating and lining system.
Construction Technical Data Sheet Edition 30 April 2013 Sika Asplit VEL Highly Chemical Resistant Laminate System Product Description Sika Asplit VEL is 2 part, glass fabric reinforced, vinyl-ester based
More informationPRODUCT DATA SHEET Sikafloor -378
PRODUCT DATA SHEET 2-PART TOUGH-FLEXIBLE COLOURED EPOXY SEAL COAT DESCRIPTION is a two part tough-flexible, coloured,epoxy seal coat with improved resistance against amine blushing under critical weather
More information2-part, electrostatically conductive epoxy coating
Product Data Sheet Edition 15/08/2006 Identification no: 02 08 01 02 012 0 000001 2-part, electrostatically conductive epoxy coating Construction Product Description Uses Characteristics / Advantages Product
More informationSika-Trocal C200 Adhesive. Sika-Trocal C200 is an adhesive to bond certain insulation boards on approved substrates.
Sika-Trocal C200 Adhesive Adhesive for Insulation Boards Product Description Polyurethane-based humidity-curing one-part adhesive. Uses Sika-Trocal C200 is an adhesive to bond certain insulation boards
More informationPRODUCT DATA SHEET Sikafloor -161
PRODUCT DATA SHEET 2-PART EPOXY PRIMER, LEVELLING MORTAR, INTERMEDIATE LAY- ER AND MORTAR SCREED DESCRIPTION is an economic, two parts, low viscosity, solvent free epoxy resin. "Total solid epoxy composition
More information2-part epoxy primer, levelling mortar and mortar screed
Construction Product Data Sheet Edition 25/07/2014 Identification no: 02 08 01 02 007 0 00001 Sikafloor -156 2-part epoxy primer, levelling mortar and mortar screed Product Description Sikafloor -156 is
More informationConstruction. SikaProof A. Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures. Product Description
Construction Product Data Sheet Edition 17 April 2012 SikaProof A Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures Product Description SikaProof A is
More information2-part epoxy self-smoothing and broadcast system. Sikafloor -263 SLHC is a two part, economic, multi purpose binder based on epoxy resin.
Product Data Sheet Edition 2011-11_1 2-part epoxy self-smoothing and broadcast system Construction Product Description is a two part, economic, multi purpose binder based on epoxy resin. Uses Self-smoothing
More informationConstruction. 2-part High-build Solvent Free Epoxy Coating. Product Description. Product Data. Storage
Construction Product Data Sheet Edition: 22.10.2012 Identification no. Version: GCC 2-part High-build Solvent Free Epoxy Coating Product Description is a two-part, high-build, solvent free, coloured epoxy
More information1-part Flexible Sealant for Concrete and Masonry Facades
Product Data Sheet Edition: 08/09/2013 Identification no: 02 05 01 01 5000000013 Version no: GCC Sikaflex Construction + Sikaflex Construction + 1-part Flexible Sealant for Concrete and Masonry Facades
More information2-part PUR tough-elastic coloured seal coat
Product Data Sheet Edition 22/02/2012 Identification no: 02 08 01 04 025 0 000001 Sikafloor -359 N 2-part PUR tough-elastic coloured seal coat Construction Product Description Sikafloor -359 N is a two
More informationCementitious Concrete Repair Mortar
Product Data Sheet Edition 08/05/2012 Identification no: 02 03 02 04 005 0 000009 SikaTop -122 Cementitious Concrete Repair Mortar Construction Product Description SikaTop -122 is a two component polymer
More informationTwo-component solvent-free polyurethane adhesive used in the construction of SikaRoof MTC Cold Bonding. Twin-pack product
Construction Product Data Sheet Edition 05.2009 Identification no: 020902909000000002 Version no. 01 Sikalastic Coldstik (Liquid Plastics Decostik) Two-component solvent-free polyurethane adhesive used
More informationPRODUCT DATA SHEET Sika Level-315 F
PRODUCT DATA SHEET CEMENTITIOUS SELF LEVELLING, FAST DRYING, FIBRE REINFORCED UNDERLAYMENT FOR USE 3-15MM THICK ON INTERIOR FLOORS PRODUCT DESCRIPTION Sika Level-315 F is a one part, polymer modified,
More information2-part water based epoxy coating. Sikafloor W is a two part, water dispersed, solvent free, coloured, epoxy resin based coating.
Product Data Sheet Edition 11.2006 Version no. 09.06 Sikafloor -2530 W 2-part water based epoxy coating Construction Product Description Sikafloor -2530 W is a two part, water dispersed, solvent free,
More information