SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section
|
|
|
- Lucas Collins
- 6 years ago
- Views:
Transcription
1 SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section Specifications for Louvered Pergola Awnings by SUNAIR : PART 1 - GENERAL P.O. Box Rt. 175, Jessup, MD JESSUP, MD PHOENIX, AZ SECTIONS INCLUDE / RELATED SECTIONS: A Exterior Sun Control Devices B Protective Covers 1.2 SECTIONS INCLUDES A. Fabricated engineered Structure / aluminum frame B. Motors and Controls C. Fabric D. Accessories 1.3 RELATED SECTIONS A. Section cast In-Place Concrete: Concrete Pad, foundation and anchor bolts B. Section Glass: Glass and glazing requirements for glazed openings. C. Section Powder Coating. 1.4 DEFENITIONS A. Structure / Pergola width is measured from outside of gutter system to outside of gutter system with slats running parallel to width. B. Structure Pergola Projection is measured from rear gutter to outside Gutter with slats running perpendicular to projection. C. Structure Post Height under gutter measured from top of post under gutter to bottom of post bracket
2 1.5 DESIGN REQUIREMENTS A. Provide factory built prefabricated structures and shelters capable of withstanding the effects of loads and stresses within limits and under conditions indicated by local codes and manufacturer. 1.6 SCOPE / DESCRIPTION: A. Furnish and install a Pergola awning(s) (MODEL OPERA or VISION) as manufactured by Pratic in Italy and distributed by Sunair Awnings & Solar screens, P.O Box 1068 Jessup, MD in accordance with the specifications below. 1.7 SUBMITTALS A. Product Data: Manufacturers data sheet shall be submitted for each product specified including, finishes, dimensions, options and installation instructions. B. Drawings and diagrams: Product details, installation details, working and assembly drawings shall be supplied as requested. B. Sample: Contractor or agent shall supply sample of materials as required. 1.8 QUALITY ASSURANCE A. Product shall be manufactured to meet or exceed the quality and standards of the Pergola awnings as per description above. B. Supplier shall be approved to supply the products specified and shall honor all claims and warranties as specified in accordance with manufacturers warranty. C. Provide structures from one manufacturer for the entire project if possible. 1.9 DELIVERY STORAGE AND HANDLING A. Product shall be delivered to site in manufacturer original packaging. B. All products should be stored and handled to prevent damage to materials, finishes, and operating mechanism.
3 1.10 WARRANTY A. Supplier shall honor manufacturers product warranty from date of installation (See specific warranty detail available from Sunair Awnings & Solar Screens). PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable distributor / manufacturer: Sunair Awnings and Solar Screens (Awnings Unlimited Inc) P.O Box 1068, 7785 Rt. 175, Jessup, MD info@sunairawnings.com, B. Substitutions: Substitutions not permitted. Any substitutions must be submitted for approval 30 days prior to close of bid. C. Product descriptions and types. Pergola is a custom made adjustable louvered structure in which the structure is made of a stationary aluminum framework with adjustable louvers by means of a motor. The control mechanism is a 110 volt Linak linear actuator motor which is operated with a remote control. D. Blades shall be operable and adjustable from closed position to 140. E. Brackets, pins, plates, and screws of the entire unit must be made of 304 or 470 stainless steel. F. When units/modules are coupled together they shall share a common structural gutter beam, and middle posts. G. Pergola models include the Opera and Vision, along with Raso side screens that are optional for Opera model only. H. Both Opera and Vision models can be either wall mounted (01) type or free standing (02) type. 2.2 STRUCTURAL & MATERIALS A. Product Description: Frame member s tubular aluminum Extrusion anodized or powder coated from manufacturers standard or custom available color range. Posts shall be at least 15 cm x 15 cm profile. Support Profile with guide must be at least 32 cm high. Blades shall be minimum 20 cm.
4 B. Unit Size: Field measure each structure to fit. Dimensions: Overall width, overall projection, mounting height at wall, post height. C. Type of system wall mounted or free standing. D. Number of units or modules needed will depend on system size requirements. E. Fabric: For optional RASO screens will be Ferrari type, Soltis 86 mesh when screen fabric is desired, or 502 vinyl when solid screens are desired from manufacturers standard range. F. Water Discharge from the louvered top and gutter system will be inside the integrated structural OPERA or VISION posts (Pratic patent). Exterior mounted gutters shall not be permitted. G. Motors and controls shall be manufactured by Linak & Pratic 3 ACCESSORIES A. Roll up RASO zipper screens integrated into the structure gutter system. Screens shall not be added on the exterior of the unit afterwards. Available fabric, either mesh or solid vinyl with windows as per manufacturers available range. B. LED Spot lights built into the blades, or RGB LED in line perimeter multi colored lighting C. Heaters D. Glass panels / Retractable Glass Walls E. Adjustable telescoping foot plates up to 5 cm to level system. PART 3 EXECUTION 3.1 INSTALLATION A. Install structures in accordance with the manufacturers standard instructions. B. If motorized, set the limit switches and program all remotes. Coordinate with the electrician so that all motors are wired to local codes.
5 C. Coordinate installation with other divisions for proper installation of structure to decking, concrete slab or wall attachment. Anchor mounting supports to provide adequate support for intended use of structure, design loads, and local codes. D. Buildings are to be field measured by the awning contractor prior to Pergola awning being manufactured and installed. 3.2 DEMONSTRATION A. Demonstrate operational method and instruct owner s personnel in proper operation and maintenance of the awning system. END OF SECTION Revised 07/26/17 SUNAIR AWNINGS & SOLAR SCREENS P.O Box 1068 Jessup, MD Phone: Fax: Info@sunairawnings.com
SECTION SPECIFICATIONS Adjustable Louvered Roof Pergola Awnings Patio Covers and Pergola Awnings Section (10530)
SECTION SPECIFICATIONS 107313 Adjustable Louvered Roof Pergola Awnings Patio Covers and Pergola Awnings Section 107313 (10530) Specifications for Motorized Louvered Pergola by SUNAIR : PART 1 - GENERAL
SECTION SPECIFICATIONS Adjustable Louvered Roof Pergola Awnings Patio Covers and Pergola Awnings Section (10530)
SECTION SPECIFICATIONS 107313 Adjustable Louvered Roof Pergola Awnings Patio Covers and Pergola Awnings Section 107313 (10530) Specifications for Motorized Louvered Pergola by SUNAIR : PART 1 - GENERAL
SPECIFICATIONS Patio Covers and Pergola Awnings Section (10530) Fabric Retractable Engineered Structures Section
SPECIFICATIONS Patio Covers and Pergola Awnings Section 107313 (10530) Fabric Retractable Engineered Structures Section 133400 Specifications for Pergola Awnings by SUNAIR : PART 1 - GENERAL P.O. Box 1068
KE Durasol Awnings. Division of the BAT USA SECTION GENNIUS ALUMINUM FABRICATED ENGINEERED STRUCTURES
KE Durasol Awnings Division of the BAT USA SECTION 133400 GENNIUS ALUMINUM FABRICATED ENGINEERED STRUCTURES DESCRIPTION The Gennius is a retractable cover system custom made to protect against sun and
Bioclimatic Pergola with ajustable blades
Technical documentation V4 Bioclimatic Pergola with ajustable blades Summary Pages The bioclimatic pergola with adjustable blades Key words: ADAPTABILITY and MODULARITY Optimize your installation DTS study
To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.
SECTION 10 73 16.16 - METAL CANOPIES TIPS: To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes. To read detailed research,
SPECIFICATIONS Section Gable Walkway Covers
Part 1: General 1.1 Related Documents SPECIFICATIONS Section 107303 Gable Walkway Covers A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.2 Engineering Design
Call for any further details including but not limited to material, temper, thickness, paint and design.
Material: extruded aluminum Fabrication Method: welded and mechanically fastened Finish: 2 part polyurethane paint powder coated Kynar finish available upon request Decking: aluminum interlocking pan Standard
SECTION ALUMINUM WALKWAY COVERS. A. The requirements of Division 1 specifications shall apply to work specified in the section.
SECTION 10 5300 ALUMINUM WALKWAY COVERS Part 1 General 1.01 Related Documents A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.02 References A. International
Ridgepac. Small Ridge Mounted Natural Ventilator Ventilation's Natural Solution since 1961
Ridgepac Small Ridge Mounted Natural Ventilator Ventilation's Natural Solution since 1961 (800) 474-3267 1351 13th Ave S. Suite 130 Jacksonville Beach, FL 32250 MoffittHVAC.com Ridgepac Table of Contents
SECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS 1. PART 1 GENERAL 1.1 WORK INCLUDED: 1. Provide labor, material, equipment and services to furnish and install aluminum windows shown on drawings and specified herein. Window
SECTION SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
SECTION HANDRAILS AND RAILINGS. A. Section Metal Fabrications: Associated metal supports.
SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Handrails and guardrails B. Guardrails for hatches and openings. C. Safety barriers. D. Roof edge protection. 1.2 RELATED SECTIONS
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as
SECTION Coiling Counter Shutters
SECTION 083313 Coiling Counter Shutters PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Doors B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening
Series - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
STANDARD SHELTER SPECIFICATIONS ATTACHMENT A
STANDARD SHELTER SPECIFICATIONS 16-04 ATTACHMENT A Issued: November 2, 2015 Technical Specifications ---------------------------------------------------------------------------------------------------------------
SECTION Coiling Counter Shutters
SECTION 08 3313 Coiling Counter Shutters PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Doors B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening
SHERIDAN SEATING INC.
SHERIDAN SEATING INC. THEATER PLATFORM SEATING SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic platform systems comprised of multi-tiered rows of seats, deck components and risers
SECTION. Trellis and Pergola
10 73 00 SECTION Trellis and Pergola PART 1 GENERAL 1.1 SECTION INCLUDES A. Pre-engineered, pre-finished Pergola system. B. Pre-engineered, pre-finished Trellis system. 1.2 RELATED SECTIONS A. Section
Expansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
SHERIDAN SEATING INC.
SHERIDAN SEATING INC. ARENA SEATING SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic seating systems comprised of multi-tiered rows of seats, deck components and risers on interconnected,
SPECIFICATIONS Section Cantilevered Walkway Cover
Part 1: General 1.1 Related Documents SPECIFICATIONS Section 107301 Cantilevered Walkway Cover A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.2 Engineering
SECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Decorative Wire Rope Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in
9B1101 Elite Referee Shelter. SECTION Benches 1.1 WORK INCLUDED
9B1101 Elite Referee Shelter SECTION 12 67 23 Benches PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all equipment and materials, and do all work necessary to furnish and install the athletic equipment, as
SECTION PRE-ENGINEERED EXTRUDED ALUMINUM DECKING WALKWAY COVERS SPECIFICATION
Awning Works Inc Aluminum Decking Walkway Cover Specification CSI- Division 10 SECTION 10530 PRE-ENGINEERED EXTRUDED ALUMINUM DECKING WALKWAY COVERS SPECIFICATION PART 1 GENERAL 1.01 DESCRIPTION OF WORK
Superior Aluminum Guide Specification 10/4/2016 Non-Welded Aluminum Pipe Railing
The following specification has been developed by: Superior Aluminum Products 555 East Main Street Russia, Ohio 45363-0430 to assist Architects and Designers in the specification of Non Welded Concealed
Grimes Elementary School Renovation September 7, 2010 Houston Independent School District SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general
FYPON, LLC. February 2014
Section 06 66 30 EXTERIOR PVC RAILINGS AND GUARDS PART 1 - GENERAL 1.1 RELATED SECTIONS: A. All contract documents apply to work of this section; this includes but is not limited to: Agreement; Drawings;
SECTION FUEL-FIRED UNIT HEATERS
SECTION 23 55 33 PART 1 - GENERAL 1.1 DESCRIPTION A. This Section includes gas-fired unit heaters. SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable
SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
![SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)](/thumbs/77/75601156.jpg "SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)")
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
BIOCLIMATIC PERGOLAS
BIOCLIMATIC PERGOLAS Spaces to live for FEATURES SERIES OPTIONS & DETAILS 10 Panel Rotation 22 Skyroof Series 30 Side Cover INDEX 12 Integrated Panel Gutter 14 Integrated Beam & Drainage 16 Multi Sealing
A. Pre-engineered, pre-finished extruded aluminum Pavilions.
10 73 00 SECTION Pavilions PART 1 GENERAL 1.1 SECTION INCLUDES A. Pre-engineered, pre-finished extruded aluminum Pavilions. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and Accessories. B. Section
MARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
Operable / Fixed Skylight Milgard Aluminum Window
Skylight Operable / Fixed Skylight Milgard Aluminum Window The Series Skylight has been specifically designed to provide maximum thermal efficiency by incorporating a special polyurethane barrier between
BIOCLIMATIC PERGOLAS
BIOCLIMATIC PERGOLAS Spaces to live for FEATURES SERIES OPTIONS & DETAILS 10 Panel Rotation 22 Skyroof Series 30 Side Cover INDEX 12 Integrated Panel Gutter 14 Integrated Beam & Drainage 16 Multi Sealing
SECTION Coiling Doors and Grilles Model 4320
SECTION Coiling Doors and Grilles Model 4320 PART 1 GENERAL 1.1 SECTION INCLUDES A. Rolling Steel Grilles B. Guides and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared
Take shelter in style from unpredictable weather. The SOLISYSTEME BIOCLIMATIC. Pergola
Take shelter in style from unpredictable weather. The SOLISYSTEME BIOCLIMATIC Pergola Treat your patio to a tailor-made pergola: The SOLISYSTEME pergola is four key functions in one product : The SOLISYSTEME
GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
603 Summit Avenue, Suite 102 Greensboro, N.C Voice/FAX (336)
Ricky L. Loman, AIA Architect 603 Summit Avenue, Suite 102 Greensboro, N.C. 27405-7700 Voice/FAX (336) 273-7999 ADDENDUM: Number 1 ISSUED: March 14, 2017 SUBJECT: New Agriculture & Equipment Storage Barn
SECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
SHERIDAN SEATING INC.
SHERIDAN SEATING INC. TELESCOPIC BLEACHER SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic seating systems comprised of multi-tiered rows of seats, deck components and risers on interconnected,
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
SECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.
SECTION EXTERIOR SUN SHADES
SECTION 10 71 13 EXTERIOR SUN SHADES USE THIS SECTION WHEN SPECIFYING C.R. LAURENCE 7700 SERIES ALUMINUM SUN SHADE SYSTEMS. THE CRL 7700 SERIES SUN SHADE SYSTEM IS A FIXED BAR GRILLE STYLE WITH A TAPERED
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Expansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
SECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
Section BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651
SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows
SECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
SECTION ORNAMENTAL ALUMINUM RAILINGS PART 1 - GENERAL 1.01 SUMMARY
3-PART SPEC ORNAMENTAL ALUMINUM RAILINGS PART 1 - GENERAL 1.01 SUMMARY SECTION 05720 A. Section Includes: a. Solutions aluminum extruded shape top rail, square or round balustrade & rectangular bottom
SECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN
SECTION 08350 MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Flood Mitigation Solutions
Brought to you by: Side Deployed Flex-Wall (w) (p) 877-441-8368 (e) flexwall@smartvent.com Storage Container with Hinged Door open End Post Flex-Wall Guide Wire Cable (op on) Standard and custom configured
SECTION TERRA COTTA CLAY TILE RAINSCREEN SYSTEM
SECTION 07400 TERRA COTTA CLAY TILE RAINSCREEN SYSTEM PART 1 GENERAL 1.01 WORK INCLUDED A. The terra cotta clay tile elements and aluminum support system shall be manufactured by NBK Keramik GmbH as represented
Aluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
SECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
SECTION ENTRANCE FLOOR GRILLES SPECIFICATIONS
SECTION 12 48 16 ENTRANCE FLOOR GRILLES SPECIFICATIONS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and
SECTION SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
SILVER LINE BUILDING PRODUCTS. Series 1700 Heavy Commercial Aluminum Double Hung. HC65 48 x84 / HC50 60 x96 Replacement Window
DIVISION 08 / SECTION 08505 METAL WINDOWS SILVER LINE BUILDING PRODUCTS SPECIFICATIONS: GENERAL Series 1700 Heavy Commercial Aluminum Double Hung 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE
SECTION SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
ARCHED METAL FRAMED SKYLIGHTS EXARC ARCHED GLAZING SYSTEM WITH ACRYLIC & POLYCARBONATE GLAZING
EXARC Skylights, Inc (800) 247-5934 3793-B North Peachtree Road (770) 451-4352 Chamblee, GA 30341 fax(770) 451-4934 EXARC ARCHED GLAZING SYSTEM WITH ACRYLIC & POLYCARBONATE GLAZING PART 1 GENERAL 1.1 RELATED
SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION Section 08520 Aluminum Windows PART 1: WORK INCLUDED A. The conditions of the contract and applicable sections of Division
329 Boston Post Road Sudbury, Massachusetts TEL: FAX:
SECTION 12520 MECHOSHADES AND ELECTROSHADES PART 1 GENERAL 1.1 SUMMARY A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
SECTION The specification section is organized by placing information in three standard parts:
SECTION 14244 LIMITED USE HYDRAULIC ELEVATOR ***** Since 1982 Liftavator, Inc. has provided limited use/limited application (LU/LA) elevators, residential elevators, hydraulic vertical platform wheelchair
SILVER LINE BUILDING PRODUCTS
DIVISION 08 / SECTION 08560, VINYL WINDOWS SILVER LINE BUILDING PRODUCTS SPECIFICATIONS: 2200/2300/2600 Vinyl Single Hung Windows R50/R30 Performance for New Construction GENERAL 1. SECTION INCLUDES 2.
A. The extent of extruded aluminum walkway covers is shown on the Drawings and as specified herein.
SECTION 10530 - EXTRUDED ALUMINUM WALKWAY COVERS PART I - GENERAL.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division
Series 4900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction
SPECIFICATIONS: Series 4900 Vinyl Single Hung Windows R50/R45/R35/R30 Performance for New Construction GENERAL 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE A. General. B. Test Units. 1.
LOG COLLEGE MIDDLE SCHOOL
PART 1-GENERAL 1.1 SUMMARY A. This section includes the following: 1. Curb-mounted plastic glazed skylights. B. Refer to roofing system sections for roofing accessories to be built into the roofing system
SECTION SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 418 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 422 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION SECTIONAL OVERHEAD DOORS 432 SERIES INSULATED STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 432 SERIES INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
SECTION OVERHEAD COILING SHUTTERS
SECTION 08336 OVERHEAD COILING SHUTTERS This guide specification has been prepared by C.H.I. Overhead Doors to assist design professionals in the preparation of a specification section covering steel,
SECURITY WITH SOPHISTICATED STYLE
SECURITY WITH SOPHISTICATED STYLE The attractive Roll-Vision model protects against theft and keeps out debris while allowing full view of what s inside. Unlike competitors grilles, our unique design uses
SECTION WALL AND DOOR PROTECTION
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to
N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System
Version 5.22.13 N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER
MPG Series 2250T Thermally Broken Aluminum Window
SECTION 08520 ALUMINUM WINDOWS P a g e 1 MPG Series 2250T Thermally Broken Aluminum Window PART 1 GENERAL 1.01 Work Included A. Furnish and install aluminum architectural windows complete with hardware
GLASSWALL SPECIFICATIONS
GLASSWALL SPECIFICATIONS Series GL1 Individual, Glass Panels PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional Panels Manually Operated Maximum Opening Height: 10' 5 [.m] Maximum
Aluminum Perforated Rolling Door
Model ALUMA-VISION Perforated Curved or Flat Slats Rolling Service Door NOTE: For specifications, architects must choose from a variety of options. The standard choice will be shown first in plain text
SECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
E. Fume hood to have set baffling system. No adjustable baffles allowed.
1.01 SUMMARY A. Section Includes: 1. Laboratory fume hoods. B. Related Sections: 1. Section 6500 Laboratory casework 2. Section 15 Mechanical: Furnishing and installation of plumbing utilities and final
SECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
SECTION ROOF ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 72 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
SECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
SECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
SECTION.00 - GYMNASIUM EQUIPMENT PART - GENERAL 0 0. SUMMARY A. This Section includes the following gymnasium equipment that is being supplied and installed by the Owner. The Contractor shall provide the
2000/2100/2200 Series Heavy Commercial Sliding Patio Doors
2000/2100/2200 Series Heavy Commercial Sliding Patio Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644 MANKO
Architectural and Engineering Specifications for Aigis Mechtronics. Devices (Turnstiles)
Architectural and Engineering Specifications for Aigis Mechtronics AT-FALCD2121 Pedestrian Control Devices (Turnstiles) TECHNICAL SPECIFICATIONS CSI Division 13740 Security Systems Pedestrian Control Devices
SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
SECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION ORCHESTRA PIT FILLER
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Orchestra pit filler. 1.2 REFERENCES SECTION 11 61 00 ORCHESTRA PIT FILLER A. American Hardboard Association (AHA): 1. AHA A135.4-95: Basic Hardboard. B. American
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 71 13.13 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replace without change UFGS-10716 (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
SECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
Arcwall. Rain Screen Wall System
Arcwall Rain Screen Wall System Arcwall is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines
GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
SECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
SECTION 08 4113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Aluminum entrance doors and frames. 2. Glass infill panels. 3. Door hardware. B. Related Sections: