PRODUCT DESCRIPTION Titan / Tritan 6500 Series

Transcription

1 BASIC USES PRODUCT DESCRIPTION Titan / Tritan 6500 Series PRODUCT FEATURES Windows for residential and light commercial applications. PRODUCT ATTRIBUTES AND CHARACTERISTICS Extruded PVC multi-chamber frame with integral attachment flange. One piece frame and sash: provides strength and durability. Increased resistance to water and air infiltration. Exterior shop glazed. Centre of frame glazing placement: Enhanced energy performance Long-term structural integrity. Insect Screen: Painted aluminum frame with glass fibre mesh. Glazing Stops: Extruded PVC stops Weatherstripping: Santoprene Fin-Seal exterior gasket. Concealed sash balances and metal sash-locks on single hung windows. Tandem brass rollers and metal sash-locks on horizontal gliders. PVC drip lip. Low maintenance PVC. Easy installation with integral pre-punched nailing flange. Sized horizontal glider and single hung units meet Canadian egress requirements. PRODUCT OPTIONS Available as fixed sash, horizontal glider and single hung styles with dual or triple glazing. PVC Extrusion Colours: White (Standard) Wicker

2 Jamb extensions: PVC jamb extension. Standard Sizes: 165 mm (6-1/2 inch). Custom jamb sizes available up to 206 mm (8-1/4 inch). Interior Grilles in three (3) widths in five (5) standard colours. 8 mm (5/16 ) wide, available in Gold, White, Wicker, Patina & Lead 16 mm (5/8 ) wide, available in Gold, White, Wicker, Patina & Lead 25 mm (1 ) wide, available in Gold, White, Wicker, Patina & Lead Four (4) standard grille patterns available Rectangular Ladder Double Ladder Perimeter Glazing: Standard clear insulating glass Low E insulating glass with argon gas SunStop insulating glass with argon gas Argon Gas Obscure Glass Patterns: Pinhead Obscure. Glue Chip, Rain, Flax,Florex,Industrex, Aquatex, Textured Flutex, Narrow Reeded, Cross Reeded, Glacier, or Opaque Glass Tinted Glass: Grey, Bronze or Green Windows are available in many sizes and combinations. Refer to manufacturer's website or printed literature. DEFINITIONS Frame: The enclosing skeleton structure of a window that surrounds fixed or operable sash or sealed unit, consisting of a head, sill and two jambs. Glider or Slider: A type of window with one fixed sash, and one or two operable sash that slide horizontally. Insulating Glass Unit (IG or IGU): A combination of two or more panes of glass, with factory sealed space(s) using a spacer bar. Also known as a sealed unit. Mullion: An extrusion that separates fixed or operating sash within a window assembly. Nailing Fin or Flange: A vinyl or metal flange integrated into (or attached to) the perimeter of a window frame for installation onto the rough opening header, jack studs and rough sill. Picture Window: A type of window in which a sealed unit is glazed directly into window frame, without a sash. Also known as a fixed unit.

3 Sash: A sub frame component that surrounds a sealed unit. A sash can be either fixed (nonoperating) or operating. Single Hung (vertical): An operating style of window, with fixed top panel and a lower sash that slides up vertically. APPLICABLE STANDARDS, RELATED REFERENCES ASTM D696 - Coefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and 30 degrees C With a Vitreous Silica Dilatometer. ASTM D Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds ASTM E283 - Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen ASTM E330 - Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference ASTM E547 - Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference CAN/CGSB-12.8 Insulating Glass Units CGSB 41-GP-20M - Extrusions, Vinyl, Non-rigid, for Windows and Doors CSA A Windows QUALITY CSA Certified manufacturing facility, window units and glass units are regularly tested for conformance to CSA A440 as well as for weather tightness, permissible air leakage, permissible condensation within assembly, internal drainage network, wind loads, and frame structural integrity. PERFORMANCE - WINDOWS Performance based on single windows (not combinations). Picture windows conform to CSA A440 when tested for the following: Air Infiltration: Fixed. Water Penetration: Rating B3, metered 300 Pa. Wind Load: Rating C3, metered 3000 Pa. Horizontal Glider windows conform to CSA A440 when tested for the following: Air Infiltration: Rating A3, metered 0.058m 3 /h/m. Water Penetration: Rating B3, metered 300 Pa. Wind Load: Rating C3, metered 3000 Pa. Forced Entry: F10.

4 Single Hung windows conform to CSA A440 when tested for the following: Air Infiltration: Rating A3, metered 0.058m 3 /h/m. Water Penetration: Rating B3, metered 300 Pa. Wind Load: Rating C3, metered 3000 Pa. Forced Entry: F10. Clear PERFORMANCE GLAZING Code Values given are for window with specified glass and no grilles. Values can change with different grille options. Description 6500 Picture Window Energy Star Zones U-Value W/m²C RSI (1/U) Solar Heat Gain Coefficient Ultraviolet Light Blockage Visible Light Trans. Dual Dual Clear None % 81% Tri Triple Clear A B C % 74% HS1 Dual 1-LowE A B % 76% HS1A Dual 1-LowE Argon A B C % 76% Low E HS2 Tri 1-LowE A B C D % 69% HS2A Tri 1-LowE Argon A B C D % 69% HS3 Tri 2-LowE A B C D % 64% HS3A Tri 2-LowE Argon A B C D % 64% HS4 Dual 1-SunStop A B % 62% HS4A Dual 1-SunStop Argon A B C % 62% SunStop HS5 Tri 1-SunStop A B C D % 57% HS5A Tri 1-SunStop Argon A B C D % 57% HS6 Tri 2-SunStop A B C D % 43% HS6A Tri 2-SunStop Argon A B C D % 43%

5 Clear Code Description 6500 Horizontal Glider Energy Star Zones U-Value W/m²C RSI (1/U) Solar Heat Gain Coefficient Ultraviolet Light Blockage Visible Light Trans. Dual Dual Clear None % 81% Tri Triple Clear A B C % 74% HS1 Dual 1-LowE None % 76% HS1A Dual 1-LowE Argon A B C D % 76% Low E HS2 Tri 1-LowE A B C D % 69% HS2A Tri 1-LowE Argon A B C D % 69% HS3 Tri 2-LowE A B C D % 64% HS3A Tri 2-LowE Argon A B C D % 64% HS4 Dual 1-SunStop A % 62% HS4A Dual 1-SunStop Argon A B % 62% SunStop HS5 Tri 1-SunStop A B C % 57% HS5A Tri 1-SunStop Argon A B C D % 57% HS6 Tri 2-SunStop A B C D % 43% HS6A Tri 2-SunStop Argon A B C D % 43%

6 Clear 6500 Single Hung Energy Solar Heat Ultraviolet Visible U-Value RSI Code Description Star Gain Light Light W/m²C (1/U) Zones Coefficient Blockage Trans. Dual Dual Clear None % 81% Tri Triple Clear A B C % 74% HS1 Dual 1-LowE None % 76% HS1A Dual 1-LowE Argon A B C D % 76% Low E HS2 Tri 1-LowE A B C D % 69% HS2A Tri 1-LowE Argon A B C D % 69% HS3 Tri 2-LowE A B C D % 64% HS3A Tri 2-LowE Argon A B C D % 64% HS4 Dual 1-SunStop A % 62% HS4A Dual 1-SunStop Argon A B % 62% SunStop HS5 Tri 1-SunStop A B C % 57% HS5A Tri 1-SunStop Argon A B C D % 57% HS6 Tri 2-SunStop A B C D % 43% HS6A Tri 2-SunStop Argon A B C D % 43% SPECIAL WARRANTY Warranty: Manufacturer s Limited Warranty: Two (2) years. Paint and Coatings on Vinyl (PVC): Manufacturer's limited warranty of five (5) years from the date of manufacture against loss of adhesion, bubbling, cracking, flaking, or chipping. Vinyl (PVC) Components: Manufacturer's limited warranty of twenty (20) years from the date of manufacture against defects in materials and workmanship. Insulated Glass Units: Manufacturer's limited warranty, pro-rated over twenty (20) years from date of manufacture such that air seal of insulated glass units will not fail due to defects in material and workmanship.

7 LIMITATIONS Smaller window sizes and fixed sash windows do not meet Canadian egress requirements. A separate decorative brickmould is not available. COST Costs vary according to substrate condition and sealing requirements to surrounding construction, window size and configuration, glazing and accessory selection. Consult manufacturer national or regional offices for specific product costs or relative costs. MATERIALS, COMPOSITION, PROPERTIES ACCESSORIES PRODUCT PROPERTIES Rigid thermoplastic polymer of poly vinyl-chloride (PVC), unplasticized. Combustible material, but self-extinguishing. Chemical resistant. Rot proof. Properties: Tensile Strength 2.60 N/mm² Notched Impact Strength kj/m² Thermal Coefficient of expansion 80x 10-6 Max Cont Use Temp 60 o C Density 1.38 g/cm 3 Removable insect screens. SHAPE, MASS, AND DIMENSIONS Frame Width: 165mm (6-1/2"). Sash Size: 57mm (2-1/4"). SHOP FABRICATION AND ASSEMBLY Frame: Fabricated with extruded PVC with integral nailing flange, mitered with fusion welded corners, fully sealed. Sash: Fabricated with extruded PVC, mitered with fusion welded corners, fully sealed.

8 PREPARATION PRODUCT PLACEMENT Confirm window rough opening size by measuring at three (3) locations along the widths (left, center and right) and heights (top, middle, and bottom). Confirm rough opening is square by cross-measuring from corner to corner. Confirm rough opening is plumb, level, and not distorted. WINDOW INSTALLATION Place window shims on sill in each corner of rough opening and under each vertical mullion. Place additional shims for large windows in accordance with manufacturer's instructions or to CSA A440. Recommended dimensions for shims are 75 mm (3 inch) wide by 100 mm (4 inch) long (solid ply material). Lift window into opening from exterior and rest sill of window on shims. Tack in place. Confirm window is level, plumb, and square. Use additional shims at sides and top of window to ensure all components are straight and square and tight fitting to substrate. Install remaining fasteners through pre-punched holes in the flange, not less than 150 mm (6 inch) from corners and spaced at approximately mm (12 to 16 inches). Confirm correct operation of operators and operating slider sash, seats fully into the frame. Install drip flashing at head of window. Inject foam between window unit and framed opening from the exterior, using low expansion polyurethane foam. OWNER S INSTRUCTIONS Paint or stain and seal unfinished or exposed wood surfaces within thirty (30) days of installation. Paint Grade Wood Extensions: Factory prime paint-grade wood extensions, apply minimum of two (2) coats of high quality paint. Prime half-round and curved jamb extensions prior to painting. Stain Grade Wood Extensions: Apply one (1) or two (2) coats of stain, with top coat of lacquer or varnish. MAINTENANCE INSTRUCTIONS AND PROCEDURES PVC Window Frames: Clean surfaces using mild soap or diluted detergent solution with clean warm water, and

9 wipe surfaces with a clean cloth, soft bristle brush, or low pressure spray cleaner. Rinse surfaces thoroughly with clean water before soap or detergent dries. Wipe dry to avoid water marks. Hardware: Clean and lubricate hardware components regularly to prevent excessive wear. Use diluted household cleaner and wipe clean all hardware components. Rinse hardware with clean water to remove detergent or cleaner prior to lubricating. Lubricate rollers using silicone based lubricants. Avoid using petroleum based lubricants. Insect Screens: Vacuum interior mounted screens with soft brush attachment or wipe with a soap and water solution. To wash, remove screen and lay on flat surface. Apply cleaning solution and let soak for several minutes. Rinse using a low pressure garden hose spray. Glass Surfaces Clean with mild soap or vinegar-based cleaner. Wipe dry with clean, lint-free cloth. Clean grease, oil, tape adhesive, crayons, markers, or paint with mild abrasive, then repeat cleaning steps listed above. Corporate Identification A Avenue, NW Edmonton, Alberta T5S 2K7 Phone Toll free: (Edmonton AB CA) (U.S.A.) (Canada Technical Support Line) Fax Internet web site: Technical Services Available architectural@allweatherwindows.com

10 Classification and Filing MasterFormat 2004: MasterFormat 1995: OmniClass 2005: Table 23 UniFormat 1998: B2020 END