Certificate of Assessment

Size: px
Start display at page:

Download "Certificate of Assessment"

Transcription

1 Certificate of Assessment Certificate Number: 159/13 Revision: 03 Kemsley Fields Business Park Sittingbourne Kent ME9 8SR is authorised to use the BRE Global Certification Mark in association with the product(s) listed in this certificate and appendix.. Products Knauf Render Systems and Knauf Warm-Wall Insulation and Render Systems This certificate and appendix is maintained and held in force through regular surveillance activities. Dr D A Smith 03 October January 2013 Signed for BRE Global Ltd. Managing Director, BRE Global Date of Revision Date of First Issue This certificate and appendix remains the property of BRE Global Ltd and is issued subject to terms and conditions (for details visit To check the validity of this certificate please visit or contact us. BRE Global Ltd., Garston, Watford WD25 9XX. T: +44 (0) F: +44 (0) E: enquiries@breglobal.com BF1661 Rev. 1.0 Page 1 of 26 BRE Global Ltd, 2016

2 SUMMARY Knauf Render Systems (KRS) consist of a range of cementitious based ready coloured one-coat or twocoat mesh reinforced renders providing various surface textures and colours for application to suitable masonry, concrete and cement board clad steel and timber framed substrates. Knauf Warm-Wall Insulation and Render Systems (KWIRS) additionally incorporate mineral fibre or expanded polystyrene insulation and associated fixings. Carrier rail systems (outside the scope of this certificate, see ) can be incorporated to provide a 15mm cavity when KWIRS are used in conjunction with framed structures. The components of the external wall insulation and render systems are as follows: Adhesive Carrier rails (aluminium and PVC) Insulation (mineral fibre and expanded polystyrene) Fixings for insulation, Base coat materials, Reinforcing mesh, External finishes. This certificate replaces previous certificates 059/99 and 081/01 held by and extends the scope to include application of products as defined onto light gauge steel and timber framed backing walls. The systems have been assessed to confirm their suitability, within limitations, as weatherresistant external decorative finishes on new or existing walls of correctly detailed sound, clean vertical brick, block construction, with or without an existing sound render finish and cement board clad light gauge steel or timber frame construction above DPC level, in the United Kingdom. BF1661 Rev. 1.0 Page 2 of 26 BRE Global Ltd, 2016

3 CONDITIONS OF USE 1. (the Systems) are for use onto backing walls of new or existing buildings in locations in the UK, for forming a weather resistant external insulation and render system. The backing wall can be masonry, dense concrete or no - fines concrete, and above damp proof course level, timber frame or light gauge steel frame construction. 2. The number and type of fixings to masonry backing walls shall be determined in accordance with BS Structural fixings in concrete and masonry. Method of test for tensile loading. Where required consideration should also be given to BS Structural fixings in concrete and masonry. Method for determination of resistance to loading in shear. 3. Timber frame and light gauge steel frame backing walls shall be designed and constructed in accordance with BS 5268 Structural use of timber or BS 5950 Structural use of steelwork in building, or the relevant Eurocodes. 4. Specifiers shall ensure that backing walls and fixings to them are suitably designed to carry the weight of the systems and wind loads calculated in accordance with BS : Loadings on buildings: wind loadings. 5. The Systems shall not be considered as providing any contribution to the overall structural performance of the building or for support of any temporary structure. Knauf Render Systems and Knauf Warm-Wall Insulation and Render Systems (the Systems) are for use onto backing walls of new or existing buildings in locations in the UK, for forming a weather resistant external insulation and render system. The backing wall can be masonry, dense concrete or no - fines concrete, and above damp proof course level, timber frame or light gauge steel frame construction. 6. Specifiers shall ensure that the fire performance classifications are adequate for the intended application and relate specifically to the System in use. 7. Any building having a floor more than 18 metres above the ground level surrounding the building shall be clad in a KWIRS incorporating either mineral fibre insulation expanded polystyrene (EPS). The EPS may be either standard grade SDFRA EPS (white in colour) or graphite impregnated EPS (grey in colour) up to 100mm thick. The specific systems incorporating the EPS insulations that have been tested or assessed and classified as complying with the requirements of BR 135: 2013 Fire performance of external thermal insulation for walls of multi-storey buildings. 3rd edition Annex A and Annex B are detailed in the reports as listed in Table A below and should be obtained from the certificate holder.. BF1661 Rev. 1.0 Page 3 of 26 BRE Global Ltd, 2016

4 Table A - Fire performance of external cladding systems Evidence Provided For Fire Performance >18m: Standard/Test Fire performance of external cladding systems - Part 1: Test method for non-loadbearing external cladding systems applied to the masonry face of a building/br 135 Annex A Standard Grade SDFRA EPS (White) BRE Global Assessment Report No. P Issue 1 Graphite Impregnated EPS (Grey) BRE Global Test Report BRE Global Classification Report P Fire performance of external cladding systems - Part 2: Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame/br 135 Annex B BRE Global Test Report BRE Global Classification Report P BRE Global Assessment Report No. P No deviations from the cladding systems detailed in the reports cited in Table A are permitted. This includes no other types of combustible insulation (as defined by reaction to fire classes B, C, D or E (European) or 0, 1, 2, 3 or 4 (National)) are permitted for use in the KWIRS on any building having a floor more than 18m above ground level. 8. Acoustic performance of the Systems has not been assessed. 9. The need for vapour control on external walls of framed buildings shall be assessed and the relevant action taken (e.g. the fitting of vapour control layers and/or breather membranes) to eliminate the risk of interstitial condensation. 10. Where NHBC approval is required with timber frame building system, a minimum 15mm wide cavity which is drained and ventilated is required. When used to clad a light gauge steel frame building system, a minimum 15mm wide cavity which is drained is required. The supporting framework to produce the required cavity and the ancillary components necessary for fire stopping, drainage and ventilation are not covered by this certificate as they are designed on a project specific basis. The ancillary components and framework selected should be agreed in advance with which operates a technical support service, to ensure that they are suitably durable and compatible with the KWIRS. BF1661 Rev. 1.0 Page 4 of 26 BRE Global Ltd, 2016

5 11. Frost resistant mortars shall be used below dpc level. 12. The Systems shall be stored, handled, installed and maintained strictly in accordance with the requirements of this certificate and Knauf s Technical Installation Manual as inspected by BRE Global. 13. The performance of the Systems depends on correct installation. The quality of installation achieved on site is not covered by this certificate and therefore it is recommended that the quality of installation and workmanship is subject to appropriate checks by a competent person. 14. Periodic inspections shall be made to confirm the condition of rendering and especially the sealants to ensure adequacy of the seal. Damage should be repaired promptly. Repairs shall be in accordance with the Knauf repair procedures. 15. The Systems shall only be installed by operatives trained, approved and monitored by Knauf UK and the company shall continue to provide a technical consultancy service. 16. This certificate remains valid while the conditions contained in clause 6.1 are met and the European Technical Approvals listed in table 2.1 remain valid. STATEMENT Knauf Render Systems and Warm-Wall Insulation and Render Systems are satisfactory for use within the stated limitations provided that they are used in accordance with the Certificate holder s instructions and the requirements of this certificate when read in its entirety. BF1661 Rev. 1.0 Page 5 of 26 BRE Global Ltd, 2016

6 1. TECHNICAL SPECIFICATION Description of Product General Knauf Render Systems (KRS) consist of a range of cementitious based ready coloured one-coat or two-coat mesh reinforced renders providing various surface textures and colours for application to suitable masonry, concrete and cement board clad steel and timber framed substrates Knauf Warm-Wall Insulation and Render Systems (KWIRS) additionally incorporate mineral fibre or expanded polystyrene insulation and associated fixings The products are described in Section 1.1 and some typical construction details are presented in Appendix A (Figures A1 to A4). The associated product performance parameters that have been evaluated are described in Section KRS and KWIRS have been assessed for use as a weather resistant decorative exterior finishes to masonry, concrete and brick & block, timber and steel frame backing walls. KWIRS additionally provided improved thermal performance. The system components which can be used in the combinations shown in Table 1.1 (overleaf) are described in the following paragraphs to Adhesive and basecoats SM700 & SM300 Bonding reinforcing lime cement mortars with micro-fibres, fine additives and bonding agent for application to masonry, concrete, external wall insulation or cement board UP210 A water-resistant cement and lime mortar incorporating limestone or quartz particles supplied as a pre-blended powder for application to masonry and concrete Insulation materials Warm-Wall Mineral Fibre Wool Mineral fibre square edge slab to BS EN Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification. Board dimensions are 1200 x 600 mm and 800 x 625 mm, with thicknesses between 30 and 120 mm. Grooved boards (600 x 600 mm) are supplied for use with carrier rails Warm-Wall Polystyrene Expanded polystyrene board supplied in accordance with BS EN Thermal insulation products for buildings. Factory made products of expanded polystyrene. Specification. Boards are straight edged or tongued and grooved on two edges with dimensions 1000 by 500 mm, and thicknesses between 30 and 160mm. Grooved boards (500 x 500 mm) are supplied for use with carrier rails. BF1661 Rev. 1.0 Page 6 of 26 BRE Global Ltd, 2016

7 Table 1.1 Combinations of system components Background Adhesive Carrier rail 1 Insulation Basecoat Masonry Timber or steel frame clad with cement board None SM700 SM300 SM700 SM300 None Plastic Aluminium None Expanded polystyrene Mineral fibre None Expanded polystyrene Mineral fibre Expanded polystyrene Mineral fibre Notes 1. Carrier rails are outside the scope of this certificate None UP210 SM700 SM300 Finish coat Presto Noblo, SP260 or Conni S Addi S Warm-Wall Mineral Fibre Volamit Mineral fibre square edge slab to BS EN with combed cement based coating on the reverse. Board dimensions are 1200 mm x 200 mm, with thicknesses to match the standard mineral fibre and expanded polystyrene products are used to form horizontal and vertical fire stops where required A summary of the information provided for each insulation material in terms of product specification is presented in Table 1.2 overleaf. BF1661 Rev. 1.0 Page 7 of 26 BRE Global Ltd, 2016

8 Table 1.2 Typical properties of insulation used as part of Knauf Warm Wall systems Thermal insulation Property Test Method Mineral Fibre Wool Mineral Fibre Volamit Expanded Polystyrene Product standard - BS EN BS EN BS EN Density (kg/m 3 ) Thickness range (mm) Thermal conductivity λ 90/90 value (W/mK) BS EN Reaction to fire EN A1 A1 E Render systems There are four render systems comprising cement based one-coat or two-coat finishes. Base coats for two-coat finishes are UP210 on masonry and SM700 & SM300 on cement board Presto (one-coat finish) A one-coat scratch render system supplied as a pre-blended powder with 1.5 mm aggregate, based on white cement and lime with selected aggregates. For application in a thickness of mm for a rubbed-down finish and mm for a scratch coat finish Noblo (two-coat finish) A textured render finish coat supplied as a pre-blended powder based on white cement with selected marble aggregate. A textured finish of nominal thickness 1.5, 2 or 3 mm is obtained SP260 (two-coat finish) A textured render finish coat supplied as a pre-blended powder based on white cement with selected mineral aggregate. A textured finish of nominal thickness 1.5, 2, 3 or 5mm is obtained Conni S (two-coat finish) A silicone resin based textured render finish coat with selected mineral aggregates supplied ready-mixed. A smooth float or rolled finish of nominal finished thickness 1, 1.5, 2 or 3 mm is obtained. BF1661 Rev. 1.0 Page 8 of 26 BRE Global Ltd, 2016

9 Addi S (two coat finish) An acrylic version of the silicone resin based textured render finish coat with selected mineral aggregates supplied ready-mixed. A smooth float or rolled finish of nominal finished thickness 1.5, 2 or 3mm is obtained Fixings back to backing wall There are a number of proprietary fixings that are supplied as part of the Knauf external wall insulation and render systems. The type and specification for the fastener is determined by the nature of the substrate, insulation thickness, and overall weight of the system, the exposure environment and fire performance. The fixings pins shall be stainless steel, non-ferrous or other material that does not corrode but see clause Further information and advice shall be obtained direct from Mesh reinforcement Alkali resistant polymer coated glass fibre reinforcing mesh of glass fibre with a polymer coating for general reinforcement (160 g/m 2 or 200 g/m 2 ) Ancillary components (outside scope of the certificate) Plastic (PVC) and aluminium supporting rails and metal fixings for securing the Knauf Warm-Wall Rail System (KWRS) insulation (expanded polystyrene and mineral fibre respectively) Alkali-resistant trims and cills polyvinyl chloride (PVC), stainless steel or aluminium Silicon Resin Equaliser Paint for application to external wall areas where exposure conditions may lead to differential weathering of coloured renders. 2 PRODUCT PERFORMANCE General The performance of components and systems that have been assessed are described in the following sections of the certificate (see certificate sections 2.2 to 2.8 for product and system testing details). BF1661 Rev. 1.0 Page 9 of 26 BRE Global Ltd, 2016

10 Structure Structural Performance The Knauf Systems are considered to be non-loadbearing and therefore do not make any contribution to the structural performance of the building Mechanical Fasteners The type of mechanical fastener used depends on the nature of the backing wall and shall be specified by the designer/structural engineer for each individual project and is therefore outside the scope of this certificate. Fire General Where fire performance testing and assessments have been carried out for a specific Knauf System and/or the individual components, the results are tabulated in the following sub sections (see Table 2.1). The actual fire performance of the system is dependent on its installation and specification in accordance with the details in the referenced fire test, assessment and classification reports. For further information about the fire test reports and any fire assessment reports cited in this certificate, please contact the certificate holder Fire resistance The overall fire resistance for external walls onto which Knauf Systems have been installed depends on the nature of the backing wall and is therefore outside the scope of the certificate Reaction to fire Insulation and Render (reaction to fire) Reaction to fire test data for the Noblo, SP620, Conni S and Addi S external finishes applied onto Mineral Fibre and Expanded Polystyrene insulation are presented in Table 2.1 overleaf Fire spread on external walls Any building having a floor more than 18 metres above the ground level surrounding the building shall be clad in a KWIRS incorporating either mineral fibre insulation or expanded polystyrene (EPS). The EPS may be either standard grade SDFRA EPS (white in colour) or Graphite Impregnated EPD (grey in colour) up to 100mm thick. The specific systems incorporating the EPS insulations that have been tested or assessed and classified as complying with the requiremnts of BR 135: 2013 Fire performance of external thermal insulation for walls of multi-storey buildings. 3rd edition Annex A and Annex B are detailed in the reports as listed in Table A (see page 4) and should be obtained from the certificate holder. BF1661 Rev. 1.0 Page 10 of 26 BRE Global Ltd, 2016

11 No deviations from the cladding systems detailed in the reports cited in Table A are permitted. This includes no other type of combustible insulation (as defined by reaction to fire classes B, C, D or E (European) or 0, 1, 2, 3, 4 (National)) are permitted for use in the KWIRS on any building having a floor more than 18m above ground level. Table 2.1 Reaction to fire classification summary table for Knauf external wall insulation and render systems for application to masonry and concrete backing walls each incorporating Knauf reinforcing mesh Insulation type Finish Mineral fibre Expanded polystyrene Classification Reference Classification Reference Noblo 4 B-s1, d0 1,2 BRE Test Report B-s1, d0 1,3 SP Issue 1 Conni S 5 B-s1, d0 1,2 B-s2, d0 1,3 ETA-09/0284 Addi S 5 A2-s2, d0 ETA 13/0542 B-s2, d0 1,3 ETA-13/0555 Notes. 1. European classification in accordance with BS EN Test data obtained for insulation maximum density 150 kg/m 3 3. Test data obtained for insulation maximum density 15 kg/m 3 4. Maximum declared organic content: base coat 2.7%, finishing coat 2.0% 5. Maximum declared organic content: base coat 2.7%, finishing coat 7.1% Other fire related construction detail requirements Fixings One fire resistant (stainless steel) fixing per square metre of insulation board/slab is required as part of the fire performance requirements, further guidance is provided in BRE report BR Cavities Where cavities are present, they shall be separated by horizontal and vertical fire barriers at locations defined in the supporting documents to the building regulations. BF1661 Rev. 1.0 Page 11 of 26 BRE Global Ltd, 2016

12 Environment Weather Resistance The Systems will provide a weather resistant external wall insulation cladding to new and existing backing walls of brick and block masonry, dense and no fines concrete and sheathed light gauge steel and timber frame construction provided that the external finish and construction details at openings, fixtures and penetrations are installed and maintained in accordance with the requirements of this certificate and the supplier s installation instructions Water Penetration Resistance For timber frame and light gauge steel frame the systems shall comply with the appropriate structural requirement from the relevant parts of BS 5268 Structural use of timber or BS 5950 Structural use of steelwork in building respectively to ensure water penetration resistance is maintained Wind driven rain exposure classification Where the wind driven rain exposure classification is very severe (refer to BS Code of practice for the use of masonry. Materials and components, design and workmanship and BS 8104 Code of practice for assessing exposure of walls to wind-driven rain) further information to ensure that appropriate construction detailing is provided under these exposure conditions can be found in BR 262 (1994) Thermal insulation - Avoiding risks. If in doubt, further advice from the certificate holder should be sought Condensation Risk Assessment For KWIRS used for dwellings the project designer shall determine the condensation risk assessment in accordance with BS 5250 Code of practice for control of condensation in buildings. The condensation risk assessment shall be carried out in accordance with BS EN ISO Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods. Project specific condensation risk assessments are required for dwellings. Advice on construction detailing for thermal insulation materials is provided in BRE publication BR 262 Thermal insulation avoiding the risks (Third edition). BF1661 Rev. 1.0 Page 12 of 26 BRE Global Ltd, 2016

13 2.4.5 Accumulation of condensation Steel and timber framed construction shall be designed to avoid the accumulation of condensation. Once the design process is completed additional insulation shall not be placed within the frame cavity or against the inner face of the construction neither shall insulation be removed from the KWIRS Vapour control layer For steel and timber framed construction it is essential that any vapour control layer on the warm side of the structure is fully effective. Advice on U-value calculation modifications can be found in BRE Digest 465 U-values for light steel frame construction. Safety in use Wind loading Mechanical tests on KWIRS have shown that the systems can adequately resist wind forces anticipated in the UK for locations where suction on the system is no greater than 2kN/m2. The values shall be calculated in accordance with BS Loading for buildings. Code of practice for wind loads and suitable fixings designed and specified for each application Impact Resistance The KWIRS has adequate resistance to impact damage in situations other than those with public access below a line 1.5m above adjacent ground or floor levels exposed to pedestrians with little incentive to exercise care. Additional reinforcement is required below this level. Noise does not claim any acoustic performance for its external wall insulation and render systems. Energy Additional thermal resistance Knauf External Wall Insulation component can provide additional thermal resistance when applied to external walls. U-value calculations shall be carried out for external wall constructions in accordance with BS EN ISO 6946 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method using the thermal conductivity values in Table 2.2. BF1661 Rev. 1.0 Page 13 of 26 BRE Global Ltd, 2016

14 2.7.2 U-value calculations Advice on conventions for U-value calculations is provided in BRE Report 443 Conventions for U- value calculations. For light gauge steel frame, reference should be made to BRE Digest 465. provides U-value calculations for project specific configurations upon request Typical U-values Typical U-values for solid external wall construction are given in Table 2.2 below. Table 2.2 Typical U-values for KWIRS applied to solid external brick wall construction Insulation type Insulation thickness (mm) U-Value (W/m 2 K) Mineral fibre Expanded polystyrene External wall construction details (from outside to inside) External surface Render (thin coat render) Fixings Insulation 229mm solid brickwork 12.5mm plasterboard Internal surface Durability Hygrothermal testing Hygrothermal testing for KWIRS has been carried out in accordance with ETAG-004 External Thermal Insulation Composite Systems (ETICS) with Rendering, for Systems incorporating expanded polystyrene and Conni S, Addi S, Noblo and SP260 finishes using standard alkali resistant glass fibre reinforcement mesh. The systems were assessed as freeze/thaw resistant Periodic maintenance Periodic maintenance checks should be undertaken by the building owner on the external render finish particularly on joints, at the junctions with flashings and sills, and around any penetration through the render, e.g. for plumbing, flues, etc as for any render system. The Systems shall be maintained in accordance with the Maintenance and care/repair manual. BF1661 Rev. 1.0 Page 14 of 26 BRE Global Ltd, 2016

15 2.8.3 Design working life The Systems can be considered to have a design working life of at least 25 years provided that the system has been installed in accordance with the requirements of the manufacturer and of this certificate and that any accidental damage to the finish is effectively repaired. 3 BUILDING REGULATIONS General The Knauf External Wall Insulation and Render Systems when used in accordance with this certificate and the certificate holder s installation instructions can assist in demonstrating that the works within which they are installed will meet the stated requirements of the following building regulations and standards: For England The Building Regulations (2010), incorporating the latest amendments to the Approved Documents for use in England. Regulation 4 Regulation 6 Regulation 7 A1 B Vol. 1 B Vol. 2 C2 L1A L1B L2A L2B Requirements relating to building work Requirements relating to material change of use Materials and workmanship Loading Fire safety Dwellinghouses Fire safety Buildings other than dwellinghouses Resistance to moisture Conservation of fuel and power in new buildings Conservation of fuel and power in existing buildings Conservation of fuel and power in new buildings other than dwellings Conservation of fuel and power in existing buildings other than dwellings BF1661 Rev. 1.0 Page 15 of 26 BRE Global Ltd, 2016

16 For Wales The Building Regulations (2010), incorporating the latest amendments to the various Approved Documents for use in in Wales. Regulation 4 Regulation 6 Regulation 7 A1 B Vol. 1 B Vol. 2 C2 L1A L1B L2A L2B For Scotland Requirements relating to building work Requirements relating to material change of use Materials and workmanship Loading Fire safety Dwellinghouses Fire safety Buildings other than dwellinghouses Resistance to moisture Conservation of fuel and power: New dwellings Conservation of fuel and power: Existing dwellings Conservation of fuel and power: New buildings other than dwellings Conservation of fuel and power: Existing buildings other than dwellings The Building (Scotland) Regulations 2004 incorporating the latest amendments to the various Technical Handbooks: Regulation 8 Regulation 9 Fitness and durability of materials and workmanship Building standards applicable to design and construction Domestic 1 Structure 2 Fire 3 Environment 6 Energy Non-Domestic 1 Structure 2 Fire 3 Environment 6 Energy BF1661 Rev. 1.0 Page 16 of 26 BRE Global Ltd, 2016

17 For Northern Ireland The Building (Northern Ireland) Regulations 2012 incorporating the latest amendments to the various Technical Booklets: B C D E F1 F2 Materials and workmanship Site preparation and resistance to contaminants and moisture Structure Fire Safety Conservation of fuel and power in dwellings Conservation of fuel and power in buildings other than dwellings Construction (Design and Management) CDM Regulations Construction (Design and Management) Regulations 2015 Construction (Design and Management) Regulations (Northern Ireland) 2007 (as amended) The certificate should form part of the information used by the client, CDM coordinator, designer and contractors to discharge their responsibilities under these Regulations. 4 INSTALLATION/PRACTICAL APPLICATION General The performance of the Systems depends on correct installation. They shall be installed strictly in accordance with the Certificate holder s installation instructions, taking account of the delivery, storage and handling requirements of this certificate and the structural design engineer. The quality of installation actually achieved on specific sites is not covered by this certificate. Therefore it is recommended that the quality of installation and workmanship is subject to appropriate checks by a competent person for each installation. Approved Installers Installation of the Systems shall be carried out in accordance with the Knauf Technical Installation Manual and shall only be carried out by installers trained, approved, registered and monitored by. Storage, handling and packaging Products shall be stored in accordance with the Knauf Technical Installation Manual and with reference to the technical data sheet and materials safety data sheet for each product. BF1661 Rev. 1.0 Page 17 of 26 BRE Global Ltd, 2016

18 5 TECHNICAL APPRAISAL Performance Tests Performance tests and inspection of test data have been carried out to determine the properties and performance of the Systems when applied to external walls and include the following: Resistance to wind loading Bonding properties Performance in relation to fire - Reaction to fire Resistance to water penetration and water vapour transmission Resistance to impact Thermal properties Durability - Thermal cycling - Resistance to freeze/thaw cycles Installation Assessment has been made of the products and practicality of installation which was found to be suitably addressed by the certificate holder s installation instructions. Existing installations for the Systems have been inspected. Quality Control Factory production control Traceable records are maintained by the certificate holder. The manufacturer carries out checks at regular intervals to ensure the quality of the product is maintained within the defined product specification. BRE Global undertakes regular monitoring of the factory production against an agreed Quality Plan for each product Quality Management operates processes and procedures that are in accordance with ISO 9001 Quality Management Systems. BF1661 Rev. 1.0 Page 18 of 26 BRE Global Ltd, 2016

19 Table 5.1 Summary of product performance for external wall insulation and render systems Insulation type Characteristic Test method Product Mineral fibre Wool Volamit EPS Reaction to fire 1 EN Insulation A1 A1 E Reaction to fire 2 See Table 2.1 Noblo SP260 B-s1,d0 B-s1,d0 Conni S Addi S B-s1,d0 A2-s2, d0 Fire resistance N/A See Note 2 Wind load resistance BS System + or 2kN/m 2 Impact (hard body) BS 8200 System See Condensation and U- value calculations BS 5250 & EN ISO 6946 System B-s2,d0 Example calculations show no harmful condensation risk, U-value calculations are project specific Hygrothermal test ETAG 004 System Pass At least 25 years Water vapour Equivalent air thickness transmission rates of ETAG 004 Render s finishes d < 1.0m Freeze/thaw ETAG 004 Pass At least 25 years 1 See Section It is the responsibility of the specifier to ensure that the fire performance classifications are adequate for the intended application and relate specifically to the System in use Standards The following British Standards and Codes of Practice, and other documents have been referred to for this assessment: BS EN 12667:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance. BF1661 Rev. 1.0 Page 19 of 26 BRE Global Ltd, 2016

20 BS EN 13162:2008 BS EN 13163:2008 BS EN :2007 +A1:2009 BS EN ISO 6946:2007 BS EN ISO 13788:2002 BS EN ISO 9001:2008 BS 5250:2011 BS :2002 BS :2005 BS :1993 BS :1986 BS :1998 BS :1997 BS 8104:1992 BS 8200:1985 Thermal insulation products for buildings. Factory made Mineral Fibre (MW) products. Specification Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS). Specification Fire classification of construction products and building elements. Part 1: Classification using data from reaction to fire tests Building components and building elements. Thermal resistance and thermal transmittance. Calculation method Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods. Quality management systems. Requirements Code of practice for control of condensation in building Structural use of timber. Code of practice for permissible stress design, materials and workmanship Code of practice for the use of masonry. Materials and components, design and workmanship Structural fixings in concrete and masonry. Method of test for tensile loading. Structural fixings in concrete and masonry. Method for determination of resistance to loading in shear. Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections Loading for buildings. Code of practice for wind loads Code of practice for assessing exposure of walls to winddriven rain Impact resistance of opaque wall components European Technical Approval Guidelines: ETAG 004 External Thermal Insulation Composite Systems (ETICS) with Rendering BF1661 Rev. 1.0 Page 20 of 26 BRE Global Ltd, 2016

21 BRE Publications BR 135:2003 BR 262:2002 BR 443:2006 BR 465:2002 Fire performance of external thermal insulation for walls of multi-storey buildings. 2nd edition Thermal insulation avoiding the risks (Third edition) Conventions for U-value calculations U-values for light steel frame construction 6 CONDITIONS OF CERTIFICATE ISSUE Validity This certificate will be valid for a period of three years from date of first issue. It will remain valid in so far as: a. The materials and method of manufacture are unchanged or BRE Global has assessed any changes and found them to be satisfactory b. The designs and specifications are unaltered from those examined by BRE Global. c. The certificate holder continues to have the product checked by BRE Global. Health and Safety This certificate and the recommendations herein do not purport in any way to restate the requirements of the Health and Safety at Work Act 1974 or any statutory or common law duty of care which exists now or in the future: nor is compliance with these recommendations to be assumed as satisfying the requirements of the said Act or any existing or future statutory or common law duty of care. References to Other Documentation Where reference is made in this certificate to any Act of Parliament, Regulation, Code of Practice, British or other Standard or other publications, it shall be construed as reference to such publication in the form in which it is in force at the date of issue of the certificate. Patents BRE Global make no representational warranty that any patent or similar industrial property right is valid or that the manufacture, use, sale, lease or any other dealing or disposition of the product in whole or in part is not an infringement of any patent or industrial property right not owned by the certificate holder. BF1661 Rev. 1.0 Page 21 of 26 BRE Global Ltd, 2016

22 Confirmation of validity Confirmation that the certificate is current may be obtained from the BRE Global website ( BF1661 Rev. 1.0 Page 22 of 26 BRE Global Ltd, 2016

23 Appendix to Certificate No: 159/13 Revision: 03 APPENDIX A - Figure A1 Typical masonry backing wall (Informative) BF1661 Rev. 1.0 Page 23 of 26 BRE Global Ltd, 2016

24 Appendix to Certificate No: 159/13 Revision: 03 APPENDIX A - Figure A2 Typical framed construction wall (with cavity) (Informative) BF1661 Rev. 1.0 Page 24 of 26 BRE Global Ltd, 2016

25 Appendix to Certificate No: 159/13 Revision: 03 APPENDIX A - Figure A3 Typical junction detail at roof level (Informative) BF1661 Rev. 1.0 Page 25 of 26 BRE Global Ltd, 2016

26 Appendix to Certificate No: 159/13 Revision: 03 APPENDIX A - Figure A4 Typical junction detail at floor level (Informative) BF1661 Rev. 1.0 Page 26 of 26 BRE Global Ltd, 2016

Alsecco (U.K.) Ltd THE ALSECCO ECOMIN200 RAIL EXTERNAL WALL INSULATION SYSTEM

Alsecco (U.K.) Ltd THE ALSECCO ECOMIN200 RAIL EXTERNAL WALL INSULATION SYSTEM CI/SfB (21.9) Rn7 (M2) Alsecco (U.K.) Ltd THE ALSECCO ECOMIN200 RAIL EXTERNAL WALL INSULATION SYSTEM Certificate No 96/3247 DETAIL SHEET 6 Product THIS DETAIL SHEET RELATES TO THE ALSECCO ECOMIN200 RAIL

More information

RONACRETE RENDER PRODUCTS RONAFIX CONCRETE RENDER ADMIXTURE

RONACRETE RENDER PRODUCTS RONAFIX CONCRETE RENDER ADMIXTURE Ronacrete Ltd Ronac House Flex Meadow Merring Way Harlow Essex CM19 5TD Tel: 01279 638700 Fax: 01279 638701 e-mail: techweb@ronacrete.co.uk website: www.ronacrete.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

MLC MASONRY AND BRICK PLASTER SYSTEM. Product. Scope. Appraisal No. 839 [2013] Appraisal No. 839 (2013) BRANZ Appraisals

MLC MASONRY AND BRICK PLASTER SYSTEM. Product. Scope. Appraisal No. 839 [2013] Appraisal No. 839 (2013) BRANZ Appraisals MLC MASONRY AND BRICK PLASTER SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Specialized Construction Products Ltd PO Box 101 127 North Shore Mail Centre Auckland

More information

Building Regulations

Building Regulations Bluebird Fixings Limited Westminster Industrial Estate Station Road North Hykeham Lincoln LN6 3QY Tel: 01522 697776 Fax: 01522 697771 CI/SfB Xt6 Agrément Certificate No 93/2878 Second issue* Designated

More information

Certificate No: EWWS546

Certificate No: EWWS546 Certificate No: EWWS546 Kingspan TEK Building System Description of Product Kingspan TEK Building System for use as wall and roof panels. The system is a structural insulated panel (SIP) system comprising

More information

Light steel frame walls

Light steel frame walls Light Steel Frame Walls Light steel frame walls Solution optimiser and pathfinder Overview Light steel framing is extensively used due to its good thermal and structural behaviour. Heat loss reduction

More information

KINGSPAN INSULATION KOOLTHERM K15 RAINSCREEN INSULATION BOARD

KINGSPAN INSULATION KOOLTHERM K15 RAINSCREEN INSULATION BOARD Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 850 8555 Fax: 0870 850 8666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com APPROVAL INSPECTION

More information

Certificate No: EW369A

Certificate No: EW369A Certificate No: EW369A Rockwool UK - REDArt Silicone Description of Product The REDArt Silicone system is produced from insulation made of renewable volcanic rock. There are a number of options in thickness

More information

LAPOLLA SPRAY APPLIED OPEN CELL INSULATION LAPOLLA ATOC

LAPOLLA SPRAY APPLIED OPEN CELL INSULATION LAPOLLA ATOC Lapolla Industries, Inc 15402 Vantage Parkway East, Suite 322 Houston Texas 77032 USA Tel: + 001 877 636 2648 e-mail: info@lapolla.com website: www.lapolla.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

Agrément Certificate 05/4201 website: Product Sheet 2 PLYLOAD HIGH PERFORMANCE DAMP-PROOF COURSES

Agrément Certificate   05/4201 website:   Product Sheet 2 PLYLOAD HIGH PERFORMANCE DAMP-PROOF COURSES Plysolene Limited 21 Star Industrial Estate Partridge Green West Sussex RH13 8RA Tel: 01403 713555 Fax: 01403 713666 Page 1 of 9 Agrément Certificate e-mail: sales@plysolene.co.uk 05/4201 website: www.plysolene.co.uk

More information

EPSICON EXTERNAL WALL INSULATION SYSTEMS EPSICON 2 EXTERNAL WALL INSULATION SYSTEM

EPSICON EXTERNAL WALL INSULATION SYSTEMS EPSICON 2 EXTERNAL WALL INSULATION SYSTEM Wetherby Building Systems Limited 1 Kidglove Road Golborne Enterprise Park Golborne Lancashire WA3 3GS Tel: 01942 717100 Fax: 01942 717101 e-mail: info@wbs-ltd.co.uk website: www.wbs-ltd.co.uk APPROVAL

More information

PITTSBURGH CORNING (UK) PERINSUL HL PERINSUL HL

PITTSBURGH CORNING (UK) PERINSUL HL PERINSUL HL Pittsburgh Corning (UK) Ltd 31-35 Kirby Street Hatton Garden London EC1N 8TE Tel: 020 7492 1731 Fax: 020 7492 1730 e-mail: info@foamglas.co.uk website: www.foamglas.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

Part 5 Substructure and ground floors. Chapter 5.2. Suspended ground floors

Part 5 Substructure and ground floors. Chapter 5.2. Suspended ground floors Part 5 Substructure and ground floors Chapter CONTENTS SCOPE Clause Page DESIGN - General Design standards D1 1 Statutory and other requirements D2 1 Resistance to ground contaminants D3-D4 1 This Chapter

More information

CALL TO TALK TO THE SAS TEAM

CALL TO TALK TO THE SAS TEAM CALL 01647 24620 TO TALK TO THE SAS TEAM new EIFS.indd 1 1 8/29/2013 11:21:00 AM Contents Insulation overview Page 4 ProRend EIFS Adhesive System Installation Page 6 ProRend EIFS Rail System Installation

More information

KINGSPAN INSULATION KOOLTHERM K10 SOFFIT INSULATION

KINGSPAN INSULATION KOOLTHERM K10 SOFFIT INSULATION Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 8508555 Fax: 0870 8508666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com APPROVAL INSPECTION TESTING

More information

NOVABRIK Parement extérieur Verkleidung Bedachung. Regulations

NOVABRIK Parement extérieur Verkleidung Bedachung. Regulations Designated by Government to issue European Technical Approvals Product Novabrik Ireland Limited Templemichael Caherconlish Co Limerick Ireland Tel: 00 353 6135 1400 Fax: 00 353 6135 1690 e-mail: info@novabrik.ie

More information

PRODUCT SHEET 1 SUNDOLITT EPS CAVITY WALL BOARDS

PRODUCT SHEET 1 SUNDOLITT EPS CAVITY WALL BOARDS Sundolitt Ltd Bath Road Green Lane Industrial Estate Gateshead Tyne & Wear NE10 0JT Tel: 0191-438 1023 Fax: 0191-495 4111 e-mail: info@sundolitt.com website: www.sundolitt.co.uk Agrément Certificate No

More information

NBT DIFFUTHERM EXTERNAL WALL INSULATION SYSTEM NBT DIFFUTHERM EXTERNAL WALL INSULATION SYSTEM FOR USE ON TIMBER FRAMES

NBT DIFFUTHERM EXTERNAL WALL INSULATION SYSTEM NBT DIFFUTHERM EXTERNAL WALL INSULATION SYSTEM FOR USE ON TIMBER FRAMES Natural Building Technologies The Hangar Worminghall Road Oakley Buckinghamshire HP18 9UL Tel: 01844 338 338 Fax: 01844 338 525 e-mail: info@natural-building.co.uk website: www.natural-building.co.uk APPROVAL

More information

TYVEK ROOF LINING SYSTEMS PRODUCT SHEET 3 TYVEK SD2 AIR LEAKAGE BARRIER/VAPOUR CONTROL LAYER

TYVEK ROOF LINING SYSTEMS PRODUCT SHEET 3 TYVEK SD2 AIR LEAKAGE BARRIER/VAPOUR CONTROL LAYER DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 879770 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com Agrément Certificate

More information

LOW-E FOIL INSULATION FOR PITCHED ROOFS, DRY LININGS AND FLOORS LOW-E FOIL INSULATION FOR USE IN PITCHED ROOF APPLICATIONS

LOW-E FOIL INSULATION FOR PITCHED ROOFS, DRY LININGS AND FLOORS LOW-E FOIL INSULATION FOR USE IN PITCHED ROOF APPLICATIONS Low-E UK Ltd Unit 48 Weaver Industrial Estate Blackburn Street Liverpool Merseyside L19 8JA Tel: 0151 494 9994 Fax: 0560 310 7699 e-mail: info@low-e.co.uk website: www.low-e.co.uk APPROVAL INSPECTION TESTING

More information

Rockwool Ltd Pencoed Bridgend Mid Glamorgan CF35 6NY Tel: Fax:

Rockwool Ltd Pencoed Bridgend Mid Glamorgan CF35 6NY Tel: Fax: CI/SfB (21.9) Ym1 (M2) Designated by Government to issue European Technical Approvals Product Rockwool Ltd Pencoed Bridgend Mid Glamorgan CF35 6NY Tel: 01656 862621 Fax: 01656 862302 ROCKWOOL CAVITY WALL

More information

PAVACLAD SYSTEM ISOLAIR AND PAVATHERM-PLUS WOOD FIBRE INSULATION BOARDS

PAVACLAD SYSTEM ISOLAIR AND PAVATHERM-PLUS WOOD FIBRE INSULATION BOARDS Natural Building Technologies The Hangar Worminghall Road Oakley Buckinghamshire HP18 9UL Tel: 01844 338338 Fax: 01844 338525 e-mail: info@natural-building.co.uk website: www.natural-building.co.uk PAVACLAD

More information

ROCKCOTE RESENE MONOTEK SYSTEMS

ROCKCOTE RESENE MONOTEK SYSTEMS Product Appraisal No.500 [2007] BRANZ Appraisals Technical Assessments of products for building and construction 1.1 The Rockcote Resene Monotek Systems consists of the Rockcote Resene Monotek Texture

More information

Certificate No: EWWS165

Certificate No: EWWS165 Certificate No: EWWS165 Kingspan Kooltherm K15 Rainscreen Board Description of Product Kooltherm K15 Rainscreen Board is a rigid phenolic insulation board incorporating foil composite facings. It is intended

More information

Regulations Detail Sheet 1

Regulations Detail Sheet 1 Ancon Building Products President Way President Park Sheffield S4 7UR Tel: 0114 275 5224 Fax: 0114 276 8543 e-mail: info@ancon.co.uk website: www.ancon.co.uk Agrément Certificate No 99/3659 Fourth issue*

More information

Agrément Certificate 15/5233 website: Product Sheet 1

Agrément Certificate   15/5233 website:   Product Sheet 1 ROCKWOOL Ltd Pencoed Bridgend CF35 6NY Tel: 01656 862621 Fax: 01656 862302 Agrément Certificate email: CustomerSupportCentre@rockwool.co.uk 15/5233 website: www.rockwool.co.uk Product Sheet 1 This Agrément

More information

BRE Global Assessment Report

BRE Global Assessment Report BRE Global Assessment Report An assessment of the fire performance of the Gebrik Insulating Brick Cladding System against BR 135, Third Edition Prepared for: Date: 13 April 2016 Aquarian Cladding Systems

More information

KINGSPAN INSULATION KINGSPAN TW55 THERMAWALL FRAMING BOARD INSULATION

KINGSPAN INSULATION KINGSPAN TW55 THERMAWALL FRAMING BOARD INSULATION Kingspan Insulation Limited Pembridge Leominster Herefordshire HR6 9LA Tel: 01544 388601 Fax: 01544 388888 website: www.insulation.kingspan.com Agrément Certificate 08/4590 Product Sheet 1 KINGSPAN INSULATION

More information

GREENSPAN CLADDING SYSTEM AQUAPANEL EXTERIOR CEMENT BOARD SYSTEM

GREENSPAN CLADDING SYSTEM AQUAPANEL EXTERIOR CEMENT BOARD SYSTEM Greenspan Products Limited Ballyhahill Co Limerick Ireland Tel: 00 353 698 2222 Fax: 00 353 698 2226 e-mail: info@greenspan.ie website: www.greenspan.ie GREENSPAN CLADDING SYSTEM APPROVAL INSPECTION TESTING

More information

XTRATHERM XTROLINER (XO) XTRATHERM XTROLINER RAINSCREEN BOARD (XO/RS)

XTRATHERM XTROLINER (XO) XTRATHERM XTROLINER RAINSCREEN BOARD (XO/RS) Xtratherm Ltd Liscarton Industrial Estate Kells Road Navan Co Meath Ireland Tel: 00 353 46 906 6000 Fax: 00 353 46 906 6090 e-mail: info@xtratherm.com website: www.xtratherm.com APPROVAL INSPECTION TESTING

More information

Agrément Certificate 17/5466 website: Product Sheet 1 LEADAX FLASHINGS LEADAX

Agrément Certificate   17/5466 website:   Product Sheet 1 LEADAX FLASHINGS LEADAX Leadax BV Vlijtweg 4 8191 JP Wapenveld The Netherlands Tel: +31 085 065 37 46 Agrément Certificate e-mail: info@leadax.com 17/5466 website: www.leadax.com Product Sheet 1 This Agrément Certificate Product

More information

SOLCO DAMP-PROOF COURSES SOLCOURSE HIGH PERFORMANCE DAMP PROOF COURSE

SOLCO DAMP-PROOF COURSES SOLCOURSE HIGH PERFORMANCE DAMP PROOF COURSE Solco Building Products Unit 51 52 Portmanmoor Road Industrial Estate Ocean Park Cardiff CF24 5HB Tel: 0808 168 6927 e-mail: enquiries@solco.co.uk website: www.solco.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

BUILDBASE SUPPLIED BY IKO BREATHER MEMBRANE FOR USE IN TIMBER FRAME CONSTRUCTIONS

BUILDBASE SUPPLIED BY IKO BREATHER MEMBRANE FOR USE IN TIMBER FRAME CONSTRUCTIONS IKO PLC Appley Lane North Appley Bridge Wigan Lancashire WN6 9AB Tel: 01257 255771 Fax: 01257 252514 Agrément Certificate e-mail: technical.uk@ikogroup.com 15/5190 website: www.ikogroup.co.uk Product Sheet

More information

DUROX AIRCRETE BLOCKS SUPABLOC 10

DUROX AIRCRETE BLOCKS SUPABLOC 10 Tarmac Building Products Tustead House Buxton Derbyshire SK17 8TG Tel: 0870 242 1489 Fax: 01375 656218 e-mail: technical.services@tarmacbp.co.uk website: www.tarmacbuildingproducts.co.uk APPROVAL INSPECTION

More information

EUROBRICK CLADDING SYSTEMS X-CLAD EXTERNAL CLADDING SYSTEM

EUROBRICK CLADDING SYSTEMS X-CLAD EXTERNAL CLADDING SYSTEM APPROVAL INSPECTION TESTING CERTIFICATION Eurobrick Systems Limited Unit 5, Newbridge Trading Estate Newbridge Close Bristol BS4 4AX Tel: +44 (0)117 971 7117 Fax: +44 (0)117 971 7217 TECHNICAL APPROVALS

More information

NDC POLIPAK DAMP-PROOF COURSES DAMPLAS CPT PLUS

NDC POLIPAK DAMP-PROOF COURSES DAMPLAS CPT PLUS NDC Polipak Ltd 1 Garratts Lane Cradley Heath West Midlands B64 5RE Tel: 0121 561 6700 Fax: 0121 559 0230 e-mail: enquiries@ndcpolipak.com website: www.ndcpolipak.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

TYVEK ROOF LINING SYSTEMS PRODUCT SHEET 3 DUPONT AIRGUARD CONTROL AIR LEAKAGE BARRIER/ VAPOUR CONTROL LAYER

TYVEK ROOF LINING SYSTEMS PRODUCT SHEET 3 DUPONT AIRGUARD CONTROL AIR LEAKAGE BARRIER/ VAPOUR CONTROL LAYER DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 879770 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com Agrément Certificate

More information

SANDTOFT FLASHINGS KORAFLEX FLASHING SYSTEM

SANDTOFT FLASHINGS KORAFLEX FLASHING SYSTEM Sandtoft Roof Tiles Ltd Belton Road Sandtoft Doncaster South Yorkshire DN8 5SY Tel: 0844 9395 999 Fax: 0844 9359 950 e-mail: info@sandtoft.co.uk website: www.sandtoft.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

Product Regulations Detail Sheet 1

Product Regulations Detail Sheet 1 Designated by Government to issue European Technical Approvals Electronic Copy Visqueen Building Products Zedcor Business Park Bridge Street Witney Oxfordshire OX8 6LJ Tel: 01993 776346 Fax: 01993 776233

More information

CONCRETE BLOCKS Lignacite

CONCRETE BLOCKS Lignacite A range of fine textured, loadbearing units, suitable for facing and general purpose applications. Select from a range of sizes, strengths and grades for total design flexibility. Paint Grade General Properties

More information

Agrément Certificate 97/3310 website: Product Sheet 1

Agrément Certificate   97/3310 website:   Product Sheet 1 IKO PLC Appley Lane North Appley Bridge Wigan Lancashire WN6 9AB Tel: 0844 412 7228 Fax: 0844 412 7229 Page 1 of 10 Agrément Certificate e-mail: technical@ikogroup.co.uk 97/3310 website: www.ikogroup.co.uk

More information

CELOTEX INSULATION CELOTEX RANGE OF PIR INSULATION BOARDS FOR TIMBER-FRAME DWELLINGS

CELOTEX INSULATION CELOTEX RANGE OF PIR INSULATION BOARDS FOR TIMBER-FRAME DWELLINGS Celotex Limited Lady Lane Industrial Estate Hadleigh Ipswich Suffolk IP7 6BA Tel: 01473 822093 Fax: 01473 820880 e-mail: technical@celotex.co.uk website: www.celotex.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

SWIP SOLID WALL INTERNAL WALL INSULATION SYSTEM

SWIP SOLID WALL INTERNAL WALL INSULATION SYSTEM SWIP Ltd ROC House Unit 15 Key Business Park Kingsbury Road Birmingham West Midlands B24 9PT Tel: 0845 402 3585 email: info@swipiwi.co.uk website: www.swipiwi.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as

More information

CATNIC LINTELS CATNIC CN ANGLE LINTEL RANGE OF LINTELS

CATNIC LINTELS CATNIC CN ANGLE LINTEL RANGE OF LINTELS Corus (UK) Ltd Catnic Pontypandy Industrial Estate Caerphilly CF83 3GL Tel: 029 2033 7900 Fax: 029 2088 2820 e-mail: catnic.technical@corusgroup.com website: www.catnic.com APPROVAL INSPECTION TESTING

More information

ROCKWOOL BUILT IN CAVITY WALL INSULATION BATTS ROCKWOOL CAVITY WALL BATT

ROCKWOOL BUILT IN CAVITY WALL INSULATION BATTS ROCKWOOL CAVITY WALL BATT Rockwool Ltd 26/28 Hammersmith Grove Hammersmith London W6 7HA Tel: 01656 862621 Fax: 01656 862302 e-mail: customer.support@rockwool.co.uk website: www.rockwool.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

KNAUF MARMORIT WARM WALL EXTERNAL WALL INSULATION SYSTEMS KNAUF MARMORIT WARM WALL EPS EXTERNAL WALL INSULATION SYSTEM

KNAUF MARMORIT WARM WALL EXTERNAL WALL INSULATION SYSTEMS KNAUF MARMORIT WARM WALL EPS EXTERNAL WALL INSULATION SYSTEM Knauf Marmorit UK GmbH St Andrews House St Andrews Road Avonmouth Bristol BS11 9DQ Tel: 0117 9821042 Fax: 0117 9823025 e-mail: enquiries@marmorit.co.uk website: www.marmorit.co.uk APPROVAL INSPECTION TESTING

More information

RIW LIQUID ASPHALTIC COMPOSITION Membrane étanche à l humidité Feuchtigkeitssperre. Regulations. Requirement: C2(a) Resistance to moisture Comment:

RIW LIQUID ASPHALTIC COMPOSITION Membrane étanche à l humidité Feuchtigkeitssperre. Regulations. Requirement: C2(a) Resistance to moisture Comment: RIW Ltd Arc House Terrace Road South Binfield Bracknell Berkshire RG42 4PZ Tel: 01344 397777 Fax: 01344 862010 e-mail: technical@riw.co.uk website: www.riw.co.uk CI/SfB a Vs1 Agrément Certificate No 89/2278

More information

INSTACLAD EXTERNAL WALL INSULATION SYSTEMS INSTACLAD RAPIDE EXTERNAL WALL INSULATION SYSTEMS

INSTACLAD EXTERNAL WALL INSULATION SYSTEMS INSTACLAD RAPIDE EXTERNAL WALL INSULATION SYSTEMS InstaFibre Ltd Insta House Ivanhoe Road Hogwood Business Park Finchampstead Wokingham Berkshire RG40 4PZ Tel: 0118 932 8811 Fax: 0118 932 8314 e-mail: info@instagroup.co.uk website: www.instagroup.co.uk

More information

THE A PROCTOR GROUP VAPOUR AND LOW AIR PERMEABLE MEMBRANE FRAMETITE FOR USE IN WALLS

THE A PROCTOR GROUP VAPOUR AND LOW AIR PERMEABLE MEMBRANE FRAMETITE FOR USE IN WALLS The A Proctor Group Ltd The Haugh Blairgowrie Perthshire PH10 7ER Tel: 01250 872261 e-mail: contact@proctorgroup.com website: www.proctorgroup.com APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS

More information

URSA TF Roll URSA GLASSWOOL.

URSA TF Roll URSA GLASSWOOL. URSA GLASSWOOL E-mail : ursauk@uralita.com URSA UK LTD Crest House 102-104 Church Road Teddington, Middlesex TW11 8PY United Kingdom Tel : 020 8977 96 97 Fax : 020 8977 94 56 Web : www.ursa-uk.co.uk E-mail

More information

RIW HIGH PERFORMANCE DAMP-PROOFING SYSTEM

RIW HIGH PERFORMANCE DAMP-PROOFING SYSTEM RIW Ltd Arc House Terrace Road South Binfield Bracknell Berkshire RG42 4PZ Tel: 01344 397777 Fax: 01344 862010 e-mail: enquiries@riw.co.uk website: www.riw.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

THERMALITE AIRCRETE BLOCKS AND THIN-JOINT SYSTEM TURBO

THERMALITE AIRCRETE BLOCKS AND THIN-JOINT SYSTEM TURBO Forterra Building Products Limited 5 Grange Park Court Roman Way Northampton NN4 5EA Tel: 0330 123 1018 Fax: 01530 273183 e-mail: asktechnical@forterra.co.uk website: www.forterra.co.uk THERMALITE AIRCRETE

More information

NOVABRIK MORTARLESS BRICK SYSTEM Parement extérieur Verkleidung Bedachung. Regulations

NOVABRIK MORTARLESS BRICK SYSTEM Parement extérieur Verkleidung Bedachung. Regulations CI/SfB Acheson & Glover 64 Old Moy Road Dungannon Co Tyrone BT71 6PU Tel: 028 8778 4208 Fax: 028 8778 4805 e-mail: novabriksales@acheson-glover.com website: www.acheson-glover.com/www.novabrik.com (21.9)

More information

OLDROYD MEMBRANE SYSTEMS OLDROYD XS

OLDROYD MEMBRANE SYSTEMS OLDROYD XS Oldroyd AS Kragerø Næringspark 3766 Sannidal Norway Tel: 00 47 35 98 75 50 Fax: 00 47 35 98 75 51 e-mail: oldroyd@oldroyd.com website: www.fixoldroyd.com APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL

More information

DACATIE INSULATED PVC-U CAVITY CLOSERS DACATIE SUPAFIX (SF), SUPAFIX FIRE RATED (SFR) AND SUPAFIX MULTICLOSER INSULATED PVC-U CAVITY CLOSERS

DACATIE INSULATED PVC-U CAVITY CLOSERS DACATIE SUPAFIX (SF), SUPAFIX FIRE RATED (SFR) AND SUPAFIX MULTICLOSER INSULATED PVC-U CAVITY CLOSERS Dacatie Building Solutions Quantum Profile Systems Ltd Salmon Fields Royton Oldham Lancashire OL2 6JG Tel: 0161 622 2020 Fax: 0161 622 2022 e-mail: info@dacatie.co.uk website: www.dacatie.co.uk DACATIE

More information

CONCRETE BLOCKS Lignacite

CONCRETE BLOCKS Lignacite A range of fine textured, loadbearing units, suitable for facing and general purpose applications. Select from a range of sizes, strengths and grades for total design flexibility. Paint Grade General Properties

More information

TRESPA WALL CLADDING SYSTEMS SYSTEM 700 ALUMINIUM SUB-FRAME SYSTEM

TRESPA WALL CLADDING SYSTEMS SYSTEM 700 ALUMINIUM SUB-FRAME SYSTEM Trespa International B.V. P O Box 110 6000 AC Weert The Netherlands Tel: 00 31 0495 458358 Fax: 00 31 0495 458570 e-mail: infonederland@trespa.com website: www.trespa.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

ADVANCED CONSTRUCTION SYSTEMS LTD CLADDING PRODUCTS FASTCLAD

ADVANCED CONSTRUCTION SYSTEMS LTD CLADDING PRODUCTS FASTCLAD Advanced Construction Systems Ltd Fastclad Building Granite Close Enderby Leicestershire LE19 4AE Tel: 0116 272 5133 Fax: 0116 272 5131 e-mail: info@advancedconstructionsystems.co.uk website: www.advancedconstructionsystems.co.uk

More information

TYVEK ROOF LINING SYSTEMS DUPONT AIRGUARD REFLECTIVE

TYVEK ROOF LINING SYSTEMS DUPONT AIRGUARD REFLECTIVE DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 879770 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com APPROVAL INSPECTION

More information

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as

More information

ARSANIT THERMA EXTERNAL WALL INSULATION SYSTEM THERMA DELUX BONDED EPS EXTERNAL WALL INSULATION SYSTEM

ARSANIT THERMA EXTERNAL WALL INSULATION SYSTEM THERMA DELUX BONDED EPS EXTERNAL WALL INSULATION SYSTEM Arsanit Sp. z.o.o. ul. Obwodowa 17 41-100 Siemianowice Slaskie Poland Tel: +48 (32) 608 46 05 Fax: + 48 (32) 608 46 04 e-mail: biuro@arsanit.pl website: www.arsanit.pl APPROVAL INSPECTION TESTING CERTIFICATION

More information

JABLITE FULL-FILL CAVITY WALL INSULATION JABFILL PREMIUM

JABLITE FULL-FILL CAVITY WALL INSULATION JABFILL PREMIUM Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Tel: 020 8320 9100 Fax: 020 8320 9110 website: www.jablite.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION

More information

WEBER.REND MT SYSTEMS WEBER.REND MT SYSTEMS APPLIED TO KNAUF AQUAPANEL EXTERIOR CEMENT BOARD

WEBER.REND MT SYSTEMS WEBER.REND MT SYSTEMS APPLIED TO KNAUF AQUAPANEL EXTERIOR CEMENT BOARD Saint-Gobain Weber Ltd Dickens House Enterprise Way Flitwick Bedfordshire MK45 5BY Tel: 0870 3330070 Fax: 0800 0142995 e-mail: mail@netweber.co.uk website: www.netweber.co.uk APPROVAL INSPECTION TESTING

More information

PAGE 297. Part 6 Superstructure (excluding roofs) Chapter 6.9. Curtain walling and cladding

PAGE 297. Part 6 Superstructure (excluding roofs) Chapter 6.9. Curtain walling and cladding PAGE 297 Part 6 Superstructure (excluding roofs) Chapter PAGE 298 CONTENTS Clause Page INTRODUCTION 1 DESIGN Design standards D1 2 Statutory requirements D2 2 Design life D3 2 Accessibility for maintenance

More information

WHITE PAPER. External Wall Insulation (EWI) systems for high-rise steel framed buildings

WHITE PAPER. External Wall Insulation (EWI) systems for high-rise steel framed buildings WHITE PAPER External Wall Insulation (EWI) systems for high-rise steel framed buildings Second line of defence with the Alumasc Exicco Pro drained cavity system Date: 02/05/18 Author: Alumasc Exterior

More information

PRODUCT SHEET 1 SOVEREIGN RADON BARRIERCOAT

PRODUCT SHEET 1 SOVEREIGN RADON BARRIERCOAT Sovereign Chemicals Limited Park Road Barrow-In-Furness Cumbria LA14 4EQ Tel: 01229 870800 Fax: 01229 870850 e-mail: sales@sovchem.co.uk website: www.sovchem.co.uk Agrément Certificate No 08/4534 PRODUCT

More information

CI/SfB (41) x M2 June 2005 EPS

CI/SfB (41) x M2 June 2005 EPS CI/SfB (41) x M2 June 2005 EPS INNOVATION PermaRock is the leading name in external wall insulation (EWI) and architectural façade systems in the United Kingdom, having pioneered the development of external

More information

WYKAMOL CHEMICAL DAMP-PROOFING SYSTEMS HYDRADRY

WYKAMOL CHEMICAL DAMP-PROOFING SYSTEMS HYDRADRY Wykamol Group Unit 3, Boran Court Network 65 Business Park Hapton, Burnley Lancashire BB11 5TH Tel: 0845 400 6666 Fax: 0845 400 3333 e-mail: info@wykamol.com website: www.wykamol.com APPROVAL INSPECTION

More information

Certificate No: EW597H

Certificate No: EW597H Certificate No: EW597H K Rend Brick Rend & Mineral TC Description of Product This is an assessment of K Rend Brick Rend and K Rend Mineral TC. K Rend Brick Rend is a cement based polymer modified two-coat

More information

CELOTEX INSULATION CELOTEX CW4000 AND CG4000 PIR INSULATION FOR CAVITY WALLS

CELOTEX INSULATION CELOTEX CW4000 AND CG4000 PIR INSULATION FOR CAVITY WALLS Celotex Limited Lady Lane Industrial Estate Hadleigh Ipswich Suffolk IP7 6BA Tel: 01473 822093 Fax: 01473 820880 e-mail: technical@celotex.co.uk website: www.celotex.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

Isolation de murs à double paroi Kerndämmung. Regulations. Certificate.

Isolation de murs à double paroi Kerndämmung. Regulations. Certificate. Electronic Copy Knauf Insulation Ltd P O Box 10 Stafford Road St Helens Merseyside WA10 3NS Tel: 01744 24022 Fax: 01744 612007 e-mail: tech@knaufinsulation.com website: www.knaufinsulation.co.uk CI/SfB

More information

JABLITE FULL FILL CAVITY WALL INSULATION JABFILL - HIGH PERFORMANCE (HP)

JABLITE FULL FILL CAVITY WALL INSULATION JABFILL - HIGH PERFORMANCE (HP) Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Agrément Certificate Tel: 020 8320 9100 Fax: 020 8320 9110 96/3215 website: www.jablite.co.uk Product Sheet 1 This Agrément Certificate

More information

Certificate No: EWW555

Certificate No: EWW555 Certificate No: EWW555 Durisol 365 ICF Wall construction System Description of Product This is an assessment of Durisol 365 ICF Wall construction System. The system provides a dry laid insulated shuttering

More information

MARLEY ETERNIT FAÇADE PANELS EQUITONE [NATURA]

MARLEY ETERNIT FAÇADE PANELS EQUITONE [NATURA] Marley Eternit Ltd Lichfield Road Branston Burton-on-Trent DE14 3HD Tel: 01283 722588 Fax: 01283 722219 e-mail: info@marleyeternit.co.uk website: www.marleyeternit.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

RONACRETE BEDDING MORTARS RONABOND BEDDING MORTAR

RONACRETE BEDDING MORTARS RONABOND BEDDING MORTAR Ronacrete Ltd Ronac House Flex Meadow Merring Way Harlow Essex CM19 5TD Tel: 01279 638700 Fax: 01279 638701 e-mail: techweb@ronacrete.co.uk website: www.ronacrete.co.uk APPROVAL INSPECTION TESTING CERTIFICATION

More information

JABLITE FULL FILL CAVITY WALL INSULATION JABFILL PREMIUM

JABLITE FULL FILL CAVITY WALL INSULATION JABFILL PREMIUM APPROVAL INSPECTION TESTING CERTIFICATION Jablite Limited Infinity House Anderson Way Belvedere Kent DA17 6BG Tel: 020 8320 9100 Fax: 020 8320 9110 TECHNICAL APPROVALS FOR CONSTRUCTION Agrément Certificate

More information

Agrément Certificate 17/5474 website: Product Sheet 1

Agrément Certificate   17/5474 website:  Product Sheet 1 Ibstock Brick Ltd Leicester Road Ibstock Leicestershire LE67 6HS Tel: 01530 261999 Fax: 01530 257457 Agrément Certificate e-mail: enquiries@ibstockbrick.co.uk 17/5474 website: www.ibstockbrick.co.uk Product

More information

June Residential Refurbishment Basements

June Residential Refurbishment Basements June 2010 Residential Refurbishment 3.5.1 Basements Residential refurbishment 3.0 Residential Refurbishment Basements Contents Introduction find online page Solution optimiser and pathfinder 293 Design

More information

SPS ENVIROWALL EXTERNAL WALL INSULATION SYSTEM ENVIROWALL TS RAIL SYSTEM

SPS ENVIROWALL EXTERNAL WALL INSULATION SYSTEM ENVIROWALL TS RAIL SYSTEM SPS Envirowall Limited 25/26 Rosevale Road Parkhouse Industrial Estate West Newcastle under Lyme Staffordshire ST5 7EF Tel: 0845 1300 983 Fax: 0845 1300 984 e-mail: info@spsenvirowall.co.uk website: www.spsenvirowall.co.uk

More information

August 2008: Issue 1. Non - Residential New Build 4.5 Basements

August 2008: Issue 1. Non - Residential New Build 4.5 Basements Non - Residential New Build 4.5 Basements August 2008: Issue 1 Non-residential new build 4.0 Non-residential New Build Basements Contents Introduction find online page Solution optimiser and pathfinder

More information

PRODUCT SHEET 1 PARKLEX FACADE WALL CLADDING PANEL

PRODUCT SHEET 1 PARKLEX FACADE WALL CLADDING PANEL Composites Gurea S.A. P.I. Alkaiaga C/Baldrun s/n 31.780 Vera de Bidasoa Navarra Spain Tel: 00 34 948 625 045 Fax: 00 34 948 625 420 e-mail: parklex@parklex.com website: www.parklex.com Agrément Certificate

More information

Regulations Detail Sheet 1

Regulations Detail Sheet 1 Alumasc Exterior Building Products Ltd White House Works Bold Road Sutton, St Helens Merseyside WA9 4JG Tel: 01744 648400 Fax: 01744 648401 e-mail: info@alumasc-exteriors.co.uk CI/SfB (21.9) Rn7 (M2) Agrément

More information

ZEDEX HIGH PERFORMANCE DAMP-PROOFING SYSTEM ZEDEX CPT HIGH PERFORMANCE DAMP-PROOF COURSE

ZEDEX HIGH PERFORMANCE DAMP-PROOFING SYSTEM ZEDEX CPT HIGH PERFORMANCE DAMP-PROOF COURSE Visqueen Building Products Heanor Gate Heanor Derbyshire DE75 7RG Tel: 0845 302 4758 Fax: 0845 017 8663 e-mail: enquiries@visqueenbuilding.co.uk website: www.visqueenbuilding.co.uk APPROVAL INSPECTION

More information

Owens-Corning Building Products (UK) Ltd P O Box 10 St Helens Merseyside WA10 3NS Tel: Fax:

Owens-Corning Building Products (UK) Ltd P O Box 10 St Helens Merseyside WA10 3NS Tel: Fax: Owens-Corning Building Products (UK) Ltd P O Box 10 St Helens Merseyside WA10 3NS Tel: 01744 24022 Fax: 01744 612007 CI/SfB (21.9) Rm1 (M2) Agrément Certificate No 95/3212 Designated by Government to issue

More information

RADBAR DAMP-PROOF COURSES RADBAR HIGH PERFORMANCE DAMP-PROOF COURSE

RADBAR DAMP-PROOF COURSES RADBAR HIGH PERFORMANCE DAMP-PROOF COURSE Capital Valley Plastics Ltd Cwmavon Works Cwmavon Nr Pontypool Gwent NP4 8UW Tel: 01495 772255 Fax: 01495 772251 e-mail: sales@capitalvalleyplastics.com website: www.capitalvalleyplastics.com APPROVAL

More information

DEMILEC SPRAY APPLIED OPEN CELL INSULATION SEALECTION AGRIBALANCE INSULATION FOR EXTERNAL WALLS

DEMILEC SPRAY APPLIED OPEN CELL INSULATION SEALECTION AGRIBALANCE INSULATION FOR EXTERNAL WALLS Demilec Inc. 2925 Galleria Drive Arlington Texas 76011 USA Tel: + 011-817-640-4900 Fax: + 011-817-663-2000 e-mail: info@demilecusa.com website: www.demilecusa.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

April Section Cladded Walls

April Section Cladded Walls April 2012 Section Cladded Walls Cladded Walls Cladded walls Rainscreen cladding and curtain wall systems Rainscreen cladding systems There are a wide variety of proprietary rainscreen cladding systems

More information

WinMark Performance of Curtain Walling and Rainscreen Cladding

WinMark Performance of Curtain Walling and Rainscreen Cladding WinMark Performance of Curtain Walling and Rainscreen Cladding 1.0 Introduction 1.1 The scheme is owned and operated by Wintech Engineering Limited (WEL) in accordance with the requirements of BS EN ISO/IEC

More information

ROCKWOOL BUILT IN CAVITY WALL INSULATION BATTS ROCKWOOL CAVITY WALL BATT

ROCKWOOL BUILT IN CAVITY WALL INSULATION BATTS ROCKWOOL CAVITY WALL BATT Rockwool Ltd Pencoed Bridgend CF35 6NY Tel: 01656 862621 Fax: 01656 862302 e-mail: customer.support@rockwool.co.uk website: www.rockwool.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS

More information

SAINT-GOBAIN ISOVER CAVITY WALL INSULATION WALLTHERM(2) CAVITY WALL INSULATION

SAINT-GOBAIN ISOVER CAVITY WALL INSULATION WALLTHERM(2) CAVITY WALL INSULATION Saint-Gobain Isover UK East Leake Loughborough Leicestershire LE12 6JQ Tel: 0115 9451000 Fax: 0115 9451154 e-mail: isover.enquiries@saint-gobain.com website: www.isover.co.uk APPROVAL INSPECTION TESTING

More information

URSA MINERAL WOOL URSA Façade N32 & Façade N35

URSA MINERAL WOOL URSA Façade N32 & Façade N35 RAINSCREEN CLADDING 074_Layout 1 09/10/2017 09:32 Page 1 URSA UK LTD Crest House 102-104 Church Road Teddington, Middlesex TW11 8PY United Kingdom Tel : 020 8977 96 97 Fax : 020 8977 94 56 Web : www.ursa-uk.co.uk

More information

BRE Global Test Report

BRE Global Test Report BRE Global Test Report Classification of fire performance in accordance with BR 135: 2013 Annex B. Prepared for: Date: 02 July 2014 Report Number: 287129 Iso Systems and Aquarian Cladding Systems BRE Global

More information

PRODUCT SHEET 1 ARGETON TERRACOTTA RAINSCREEN CLADDING SYSTEM

PRODUCT SHEET 1 ARGETON TERRACOTTA RAINSCREEN CLADDING SYSTEM CI/SfB (27.9) Ln6 Telling Architectural Ltd Primrose Avenue Fordhouses Wolverhampton West Midlands WV10 8AW Tel: 01902 789777 Fax: 01902 398777 e-mail: info@telling.co.uk website: www.telling.co.uk Agrément

More information

TYVEK CONSTRUCTION MEMBRANES DUPONT AIRGUARD REFLECTIVE

TYVEK CONSTRUCTION MEMBRANES DUPONT AIRGUARD REFLECTIVE DuPont de Nemours (Luxembourg) S.à r.l. Rue General Patton L-2984 Luxembourg Tel: 01275 337660 Fax: 01275 879773 e-mail: tyvek.construction@lux.dupont.com website: www.tyvekhome.com APPROVAL INSPECTION

More information

FENTRIM SEALING TAPES

FENTRIM SEALING TAPES SIGA Cover AG Rütmattstrasse 7 Ruswil 6017 Switzerland Tel: 00 41 41 499 69 69 Agrément Certificate e-mail: siga@siga.swiss 16/5378 website: www.siga.swiss Product Sheet 1 SIGA AIR AND WEATHERTIGHTNESS

More information

ROCKSILK DRITHERM CAVITY SLAB Isolation de murs à double paroi Kerndämmung. Regulations B3(4) C2(a)(b) L1(a)(i) L2(a)

ROCKSILK DRITHERM CAVITY SLAB Isolation de murs à double paroi Kerndämmung. Regulations B3(4) C2(a)(b) L1(a)(i) L2(a) CI/SfB (21.9) Rm1 Knauf Insulation Ltd P O Box 10 St Helens Merseyside WA10 3NS Tel: 01744 766666 Fax: 01744 612007 e-mail: tech@knaufinsulation.com website: www.knaufinsulation.co.uk Designated by Government

More information

INSTAFIBRE CAVITY WALL INSULATION INSTAFIBRE 34 CAVITY WALL INSULATION

INSTAFIBRE CAVITY WALL INSULATION INSTAFIBRE 34 CAVITY WALL INSULATION InstaFibre Ltd Insta House Ivanhoe Road Hogwood Business Park Finchampstead Wokingham Berkshire RG40 4PZ Tel: 0118 932 8811 Fax: 0118 932 8314 e-mail: info@instagroup.co.uk website: www.instagroup.co.uk

More information

SPRINGVALE CAVITY WALL INSULATION ECOBEAD PLATINUM CAVITY WALL INSULATION

SPRINGVALE CAVITY WALL INSULATION ECOBEAD PLATINUM CAVITY WALL INSULATION Springvale EPS Ltd Dinting Vale Business Park Glossop Derbyshire SK13 6LG Tel: 01457 863 211 Fax: 01457 869 269 e-mail: sales@springvale.com website: www.springvale.com APPROVAL INSPECTION TESTING CERTIFICATION

More information