TExAS Door & TrIM, Inc.
|
|
|
- Lawrence Perkins
- 6 years ago
- Views:
Transcription
1 TExAS Door & TrIM, Inc. dallas aubrey Excellence Through Service
2 Texas Door & Trim, inc. Texas Door & Trim, Inc. has a mission to provide business excellence by focusing on quality products, quality service and competitive prices throughout our trade area. Excellence Through Service
3 Table of Contents 3 5 Base Moulds 9 Case Moulds 14 Panel Moulds 16 Bed Moulds 17 Crown Moulds 22 Cove Moulds 23 Chair Rails 24 Screen Moulds 25 Outside Corners Inside Corners 26 Lip Moulds Nosings Glass Beads Stops 27 Half Rounds Quarter Rounds 28 Mantle Moulds 29 Batten Strips Shoe Moulds Picture Moulds Brick Moulds 30 Cap Moulds 31 Dentil Moulds 32 Window Stools Full Rounds Picture Moulds 33 Beaded Ceiling and Sidings 34 Flexible Mouldings 35 Door Swings 36 Stock Fir Doors 37 Custom Mill 38 Plinth Blocks
4 4 Base Moulds Profile* F/J AWP ASH OAK K.Alder MAPLE Flex MDF TDT-227 X X TDT 218 X X X X B-695 X X X B10 X X TDT-227 9/16" x 7-1/4" TDT-218 9/16" x 5-1/4" B695 9/16" x 6-1/2" B-10 1/2" x 5-1/8" Custom Wood Types Available. Custom Profiles Available.
5 Base Moulds 5 B-22 X X X X LB-22 X X X X X X X B-11 X X X X LB-11 X X X X X X X B-22 1" x 4-3/4" LB-22 9/16" x 4-1/2" B-11 1" x 4-1/2" LB-11 9/16" x 4-1/2" Texas Door & Trim, Inc.
6 6 Base Moulds B-395 X X B-9 X X X E-Base X Mixon X B395 9/16" x 4-1/2" B-9 9/16" x 3-1/4" E-Base 1/2" x 3-1/2" Mixon Base 1/2" x 3-1/4" Custom Wood Types Available. Custom Profiles Available.
7 Base Moulds 7 B-322 X X X X X X X B-211 X X X X X X Colonial Base X X X X X 3-Step X B322 9/16" x 3-1/4" B211 9/16" x 3-1/4" Colonial Base 5/8" x 3-1/4" 3 Step 7/16" x 3-1/4" Texas Door & Trim, Inc.
8 8 Compound Bases PM-5 1 x 6 RH-Panel 1 x 6 PM-88 1 x 6 PM-6 1 x 6 Custom Wood Types Available. Custom Profiles Available.
9 Case Moulds 9 C-22 X X X X X X X LC-22 X X X X X X X C-11 X X X X X X X LC-11 X X X X X X X C-22 1" x 4" LC-22 5/8" x 3-1/2" C-11 1" x 3-1/2" LC-11 5/8" x 3-1/2" Texas Door & Trim, Inc.
10 10 Case Moulds C-196 X X X X X X C-295 X X TDT-1 X 3-1/2 Colonial X X X X X C /8" x 3-9/16" C-295 9/16" x 3-1/2" TDT-1 1-1/16" x 3-1/2" 3-1/2 Colonial Case 9/16" x 3-1/2" Custom Wood Types Available. Custom Profiles Available.
11 Case Moulds 11 C-322 X X X X X X X C-211 X X X X X TDT-401 X 2-1/2 Colonial X X X X X C-322 5/8" x 2-1/2" C-211 5/8" x 2-1/2" TDT /16" x 2-1/4" 2-1/2 Colonial 9/16" x 2-1/2" Texas Door & Trim, Inc.
12 12 Case Moulds C-195 X X E-Case X X 3-Step X 2 Colonial X X C-195 9/16" x 2-1/2" E Case 5/8" x 2-1/2" 3-Step 5/8" x 2-1/4" 2 Colonial 5/8" x 2" Custom Wood Types Available. Custom Profiles Available.
13 Case Moulds /8 Mixon X 2-1/8 Wedge X X X 3-1/2 Fluted X X X X X 5-1/4 Fluted X X X X 2-1/8 Mixon 5/8" x 2-1/8" 2-1/8 Wedge 5/8" x 2-1/16" 3-1/2 Fluted 11/16" x 3-3/8" 5-1/4 Fluted 9/16" x 5-1/4" Texas Door & Trim, Inc.
14 14 Panel Moulds PM-1 X X X X X X X PM-5 X X X X X X X PM-6 X X X X X X X PM-7 X X X X X X X PM-10 X X X X X X PM-88 X X X X X X PM-6 3/4" x 2" PM-1 13/16" x 1-5/16" PM-5 1 1/16" x 1-1/8" PM-7 13/16" x 1-5/16" PM-88 3/4" x 2-3/4" PM-10 11/16" x 2" Custom Wood Types Available. Custom Profiles Available.
15 Door Moulds 15 DM-1 X X X X X DM-2 X X X X DM-3 X X X X X X DM-22 X X X X X X RH Panel X X X X X X WM-134 X X DM-1 1" x 2" DM-22 3/4" x 1-3/4" DM-2 5/8" x 1-15/16" WM /16" x 1-7/16" DM-3 3/4" x 1-1/8" RH Panel 9/16" x 2" Texas Door & Trim, Inc.
16 16 Bed Moulds 8016 X X X X 8018 X 8019 X 8020 X /2" x 1-11/16" /2" x 2-1/8" /2" x 2-5/8" /2" x 3-3/16" Custom Wood Types Available. Custom Profiles Available.
17 Crown Moulds 17 MDF TDT414 X X X X X TDT-514 X X X TDT-50 X X X X X X Cradle X X X X X TDT /16" x 4-1/8" TDT /4" x 5-1/4" TDT /8" x 5" Cradle 1-5/16" x 2-1/2" TDT-50 with Cradle Texas Door & Trim, Inc.
18 18 Crown Moulds MDF TDT430 X X X X X TDT-E X X X X TDT-778 X TDT-E 1" x 4-1/4" TDT /16" x 7-7/8" TDT /32" x 6-5/16"
19 Crown Moulds X 8009 X X X X 8010 X X X X X X X 8012 X X X X X X X TDT-58 X X X X X /2" x 2-1/8" /2" x 4-1/8" /2" x 3-1/2" /2" x 2-5/8" TDT-58 5/8" x 5-9/16"
20 20 Crown Moulds TDT-20 X X X X TDT-22 X X X X X X X TDT-48 X X X X X TDT-20 9/16" x 2-3/4" TDT-22 9/16" x 4-9/16" TDT-48 11/16" x 6-13/16" Custom Wood Types Available. Custom Profiles Available.
21 Compound Crown Moulds 21 LB22/TDT-22/LB22 PM-6/1x 6/TDT-430/1x 6/PM-6 PM-6/1 x 8/WM-134/TDT-48 TDT-218/TDT-430 LB22/TDT Texas Door & Trim, Inc.
22 22 Cove Moulds 8024 X X X X 8026 X X 8026 Beaded X X 8052 X X X X X X 8060 X X X X WM-101 X X /16" x 1-3/4" WM-101 1/2" x 1/2" /16" x 2-3/4" /4" x 3/4" /4" x 7/8" 8026 Beaded 9/16" x 2-3/4" Custom Wood Types Available. Custom Profiles Available.
23 Chair Rails 23 Colonial X X X X X CR-5 X X X X X B & K X WM-390 X B & K 1/2" x 1-1/4" CR-5 7/16" x 2-1/2" Colonial 9/16" x 2-1/16" WM-390 5/8" x 2-5/8" Texas Door & Trim, Inc.
24 24 Chair Rails Screen Moulds CR-6 X X X X X X X CR-7 X X X X X X X 8140 X 8610 X X X X X 8611 X /8" x 3/4" /4" x 3/4" CR-7 1-1/8" x 2-1/2" CR-6 1-1/8" x 3-1/2" /16" x 3/4" Custom Wood Types Available. Custom Profiles Available.
25 Outside Corners Inside Corners 25 TDT-203 Col X X X X X X X /4 X X X X X X X 8238 X X X ISC X X ISC Special X X TDT-203 Colonial 1-1/4" x 1-1/4" /4 3/4" x 3/4" " x 1" /16" x 1-5/16" Inside CornerS ISC-999 3/4" x 3/4" ISC Special 1/4" x 15/16" Texas Door & Trim, Inc.
26 26 Lip Moulds Nosing Glass Bead Stops Decor 2 X X Decor 3 X X X Decor 4 X X X Decor 6 X X X 8132 Nosing X X X X Glass Bead X 8096 Stop X X X X 8541 Stop X X X X X X 8132 Nosing 1/2" x 13/16" Decor 2 3/4" x 1" 8570 Glass Bead 1/2" x 9/16" Decor /16" x 1-3/8" 8096 Stop 7/16" x 1-3/8" Decor 4 13/16" x 1-5/8" Decor 6 13/16" x 1-5/8" 8541 Stop 3/8" x 1-3/8" Custom Wood Types Available. Custom Profiles Available.
27 Half Rounds Quarter Rounds X 8078 X 8080 X 8057 X 8063 X 8065 X X X /16" x 5/8" /2" x 1" /4" x 1-5/8" Quarter Rounds /4" x 1/4" /4" x 3/4" /2" x 1/2" Texas Door & Trim, Inc.
28 28 Mantle Moulds Batten Strips MM-1 X X X X 8667 Batten X 8667 Batten 1/2" x 2-3/16" MM-1 1-3/8" x 4-5/8" Custom Wood Types Available. Custom Profiles Available.
29 Batten Strips Shoe Mould Picture Mould Brick Mould 29 Fluted Batten X Pencil Mould X 8422 X X X X X X 8263 X X WM-180 X X X X X X X Fluted Batten 3/8" x 1-3/8" 8263 Picture Mould 1/2" x 1-5/8" 8422 Shoe Mould 7/16" x 3/4" Pencil Mould 7/16" x 3/4" WM-180 Brick Mould 1-1/4" x 2" Texas Door & Trim, Inc.
30 30 Cap Moulds B & K Cap X WP-163 X Colonial Cap X SB-34 X X WP-163 5/8" x 1-5/16" SB-34 Cap 3/4" x 2-1/8" Colonial Cap 9/16" x 2-1/16" B & K Cap 1/2" x 1-1/4" Custom Wood Types Available. Custom Profiles Available.
31 Dentil Moulds 31 TDT-158 TDT-312 TDT-325 X X X TDT-158 5/8" x 1-5/8" TDT-312 5/8" x 3-1/2" TDT-325 3/8" x 3-14" Texas Door & Trim, Inc.
32 32 Window Stool Full Round MDF Window Stool X X X X X X X Full Round X /2 X X X Window Stool MDF - 11/16" x - 5-1/4", 6-1/4", 7-1/4" FJ - 11/16" x - 5-1/4", 6-1/4", 7-1/4" Custom species and sizes available 8912 Full Round 1-1/4" /2 1-1/16" x 3-1/4" Custom Wood Types Available. Custom Profiles Available.
33 Beaded Ceiling and Sidings 33 Profile F/J Yellow Pine ASH OAK K.Alder MAPLE Flex Beaded Ceiling X 122 X 116 X 116 3/4" x 5-3/8" Beaded Ceiling 1/2" x 3-1/4" 122 3/4" x 5-3/8" Texas Door & Trim, Inc.
34 34 TDT Flexible Mouldings State of the Art Nails Like Wood Paintable or Stainable Eyebrow Casings Many Patterns Available Concave Crown Mouldings Convex Radius Mouldings Custom Wood Types Available. Custom Profiles Available.
35 TDT Door Swings 35 LH Swing Twin RH Swing Texas Door & Trim, Inc.
36 36 TDT Stock Fir Doors 4501 / Low-E IG 1501 / SG 2/0, 2/6, 2/8, 3/0, 6/ Low-E / IG 2/0, 2/6, 2/8, 3/0, 6/ / Low-E / IG 1510 / SG 2/0, 2/6, 2/8, 3/0, 6/ / Low-E IG 1501 / SG 2/0, 2/6, 2/8, 3/0, 8/ Low-E / IG 2/0, 2/6, 2/8, 3/0, 8/ / Low-E / IG 1510 / SG 2/0, 2/6, 2/8, 3/0, 8/0 Custom Wood Types Available. Custom Profiles Available.
37 TDT Custom Mill 37 Full Custom Mill Capabilities Custom Doors - Radius Mouldings Any Size, Any Species See Your Sales Rep for Details Texas Door & Trim, Inc.
38 38 Plinths Blocks Profile PG AWP ASH OAK K.Alder MAPLE Flex 414PB1 X X X X X 334PB1 X X X X X CR7PB1 X X X X X 334PB18 X X X X X CR7PB1 1-1/4" x 2-3/4" 414PB1 1-1/8" x 4-1/4" 334PB18 1-1/4" x 3-3/4" 334PB1 3-3/4" x 7/8" Custom Wood Types Available. Custom Profiles Available.
39 Endura Provides You With A Solution To Real World Problems Ultimate Astragal Weathersealing Solutions Mull Pack Mull Pack Flip-Lever Enhancement Weathersealing Solutions SureSill Sill Solutions FrameSaver Z-Series Sill All Aluminum Z-Series Sill U.S. Patents: D35472, , and other patents pending U.S. Patents: , , , , U.S. Patents: 5, 857, 291; 6,491, 326 and other patents pending Z-Series Sills With Endura s line of Z-Series Sills, you ll get the best combination of performance and value. These technologically advanced sills are made up of all-composite substrates and synthetic caps and nosing. These integrated materials prevent the sill from rotting, warping and deteriorating over time. FrameSaver No matter how well a home is built, over time water and insects will come in contact with exterior door frames. Builder demand products that will resist rot and reduce costly repairs. Protecting the base of the exterior frame is the idea behind our patented, FrameSaver technology. A revolutionary wood composite material so resistant to rot and insect damage, we guarantee the frame for life with FrameSaver s Transferable Lifetime Warranty! Ultimate Astragal When builders were asked what door system problems they have the most trouble with they cited: French doors hard to get a good seal in the middle. This never has to be an issue again with the use of Endura s Ultimate Astragals, featuring the patented three-point sealing system that keeps water, air and daylight outside. Endura s entire family of French door astragals are designed for reliability and superior protection. Simple Solution Compression Corner Seal U.S. Patent: 6, 219, 971 Weather Sealing Simple Solution The Simple Solution is a compression corner seal with a patented design to seal the door s weatherstripping at the crucial corner; preventing water from percolating up and over the threshold. PE650 Weatherstrip The 650 Proud Edge Weatherstrip bridges the edges of bull nose and scant thickness doors, increasing contact with the panel face and eliminating infiltration when subjected to high air pressure. Mull Packs One piece mulls and continuous headers and sills offer an error free system built to spec with greater structural integrity. Parts are pre-cut and pre-machined with pre-drilled screw holes requiring only a minimum of effort in the shop. Leaking door systems are a thing of the past.
40 POLICIES AND WARRANTIES LIMITED ONE YEAR WARRANTY Texas Door & Trim, Inc. (TDT) warrants to the homeowner during the term of this warranty that each product sold by TDT will be free from defects in workmanship and materials for a period of twelve months from the date of TDT's invoice to the original purchaser. If a claim is made within the stated warranty period and the existence of a defect is verified, TDT will repair or replace the product or return the purchase price within a reasonable time after receipt of the claim. This warranty does not extend to any product which is covered by a warranty of the original manufacturer. For example, glass in doors will often be covered by a warranty by the glass manufacturer. For such products, the homeowner's sole remedy will be under the original manufacturer's warranty. Upon request, TDT will be happy to assist you in obtaining information regarding such manufacture's warranties. Claims under this warranty should be made in writing to: Texas Door & Trim, Inc. A claim should state the nature of the alleged defect, the date and place of purchase. TDT or its authorized representatives shall promptly investigate all claims. All claims must be made in writing. This warranty does not apply to any defects caused by improper or unauthorized repair, alteration, installation, maintenance, accident, unreasonable use or ordinary wear and tear. Doors larger than 3/6x8/0x2-1/4 or 3/0x8/0x1-3/4 are not warrantable. TDT WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. TDT'S LIABILITY WILL BE LIMITED EXCLUSIVELY TO THE COST OF REPAIR OR REPLACEMENT. IF REPAIR IS NOT PRACTICLE OR CANNOT BE TIMELY MADE, THE RETUN OF THE PRUCHASE PRICE TDT MAKES NO EXPRESS WARRANTY OF ANY KIND OTHER THAN AS SET FORTH HEREIN. ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. THE WARRANTY GRANTED HERIN IS GRANTED TO THE EXCLUSION OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. The original purchaser agrees to deliver this limited One Year Warranty to the homeowner. ALLOWABLE TOLERANCES Stile, rail and core show-through (photographing) on hardwood veneered flush doors shall not be considered a defect unless the faces of the door vary from a true plane in excess of 1/100 inch in any three-inch span Warp shall not be considered a defect unless it exceeds ¼ inch in the plane of the door itself. For flush doors up to and including 3'6" wide and over 7' in height the warp should not exceed ¼" in any 7' by width of door section. For all other doors, the warp shall not exceed ¼ inch. Warp is any distortion in the door itself, and does not refer to the relation of the door to the frame or jamb in which it is hung. The term warp shall include bow, cup and twist. In measuring the amount of warp present in a door the following method shall be used: bow, cup and twist shall be measured by placing a straight-edge, taut wire or string on the suspected concave face of the door at an angle (i.e., horizontally, vertically, diagonally), with the door in its installed position. The measurement of bow, cup, and twist shall be made at the point of maximum distance between the bottom of the straight-edge, taut wire or string and the face of the door. Panel movement (shrinkage) of 1/8" or less. Temperature and humidity may cause the wood panels in your door to shrink, leaving an unstained line along the panel edge. The panels in your door have been designed to float". Surface checks that are less than 1/32" in width and / or 2" in length. Doors shipped out of the continental United States, Hawaii or Canada are not warranted. If the claimed nonconformity is warp, TDT may defer repairing or replacing the product for a period of up to twelve (12) months from the date of claim or the date when the product was installed, as it is not uncommon for a temporary warp condition to occur as the door adjusts to local humidity and temperature conditions. This deferral will not be counted against the warranty period. CREDIT TDT is happy to extend credit to trade customers. We invite you to apply at our office. MATERIAL DELIVERIES & RETURNS Please inspect your delivered material carefully for completeness and condition. Note any discrepancies on the delivery ticket and we will make corrections at once. Damaged material cannot be returned unless noted on the ticket at time of delivery. 2. Special order items and door units are non-returnable. 3. Standard materials that are undamaged and resaleable that are left over on jobs will be picked up for credit. However, there may be a pick-up and re-stocking charge against the credit.
41 FITTING, HANGING AND FINISHING HANDLING Doors should be delivered to the building site only after the concrete, plaster, stucco; sheet rock work & paint are completely dry. Doors should not be subject to extreme or rapid changes in heat or humidity. Avoid sudden changes such as forced heat to dry out a building. if the doors are to be stored on the job site, all ends & edges must be sealed with quality oil-based sealer in order to prevent undue moisture absorption. FITTING AND HANGING When hanging door, allow adequate clearance for swelling of door or frame in damp weather. Allow approximately 3/16" clearance for swelling when the door is installed in fully dry conditions. Jambs must be plumb. Do not cut panel doors down in width by more than 1" and in height by more than 3" (1/2" maximum from top.) Use sharp fine tooth saw for trimming ends of doors. Caution must be used to avoid impairing the strength of the door when fitting for locks. Allow at least 1" of wood back of mortise. Use three hinges on doors up to 7' in height and four hinges on doors over 7'. Hinges must be set in a straight line to prevent distortion. Jambs and stops must be set square and plumb. For best performance, and exterior door should be installed under an overhang or with protection. Immediately after cutting and fitting (before hanging) seal all cut surfaces and ends of door with an effective quality sealer. See Finishing Instructions for complete recommendations. Prior to exterior exposure, doors should be finished with complete finish system. To minimize heat loss and save energy, use weather stripping On doors that are glazed with glass, the finish used should be flowed from the wood slightly onto the glass. This will provide assurance against water leakage and will protect the glazing putty" from drying out. EXTERIOR FINISHING Stain-and-Clear Finish a. The first coat should be a stain-and-sealer, a combination of stain and sealer which colors the door and seals the surface. It is available in a wide range of colors. The stain-and-sealer should have an alkyd resin base. Under no circumstances should a lacquerbased toner or any other lacquer-based finish be used on exterior doors. b. Second & third coats (two top coats minimum) may be a solvent-borne (oil-base, alkyd resin-base, polyurethane resin-base) or a water-borne (latex resin-base) clear finish. See note 1. The advantages and disadvantages of solvent-born vs. water-borne clear finishes are as follows: (1) Solvent-Borne Advantages: Faster drying, harder and more water resistant. May be applied under variable weather conditions. Disadvantages: Subject to ultra-violet degradation and not as flexible or durable as water-borne clear finish. (2) Water-Borne Advantages: Very flexible, greater ultraviolet resistance, and good exterior durability. Disadvantages: Cannot be applied below 50 degrees F, long drying period required, and may not fully cure for several weeks. Water-sensitive until cure is complete. Note: Do not sand between coats of latex clear. c. All stain-and clear finishes will perform measurably better if protected from the direct effects of sunlight and weathering, and refinishing will not be required so frequently FINISHING PREPARATION FOR FINISHING Before applying the first coat of finish, sand the entire surface lightly with 5/0 sandpaper (180 grit). This is to remove fingerprints and handling marks. Adjust or align components if necessary before finishing. Wood panels float" and may be knocked into alignment with a wood block and hammer. Be careful not to damage door. Clean door thoroughly after sanding with a cloth to remove all dust or foreign material. However, avoid using caustic or abrasive cleaners. Hang door before finishing, AND THEN remove to finish properly. All surfaces of the door must be properly finished. The edges (top, bottom and sides) should be coated with each and every coat of finish that is applied to the exterior surface of the door. Doors must be dry before finishing Paint Finish Either oil-based or latex resin-base paints may be used with success on panel doors. Oil-base paints offer more resistance on panel doors. Oil-base paints offer more resistance to the passage of water (liquid and vapor) than latex resin-base topcoat paint. Of course, both primer and top coat should be made by the same manufacturer and be designed to be used as a combination. Caution: Texas Door & Trim, Inc. cannot evaluate all the available paints and stains, or the customers' specific application requirements. Your paint dealer should know of suitable finish systems that give satisfactory results in your region. It is highly recommended that top quality finishes be selected, and the application instructions on the container be followed explicitly. Black or dark stains & paints subjected to direct sunlight will cause doors to overheat & VOID warranty.
42 Texas Door & Trim, Inc Thank You for Ordering Texas Door & Trim Custom Products Quality Custom Wood Craftsmanship From Dallas, Texas Made in America
43
44 Texas Door & Trim, inc. Texas Door & Trim, Inc. has a mission to provide business excellence by focusing on quality products, quality service and competitive prices throughout our trade area. Excellence Through Service Phone Toll Free Fax TDTsales@TDT-Inc.com Web Physical Address A Petal Street Dallas TX, Mail Address P.O. Box Dallas TX
MASTERCRAFT EXTERIOR FIBERGLASS DOOR
EXTERIOR FIBERGLASS DOOR Midwest Manufacturing ( MM ) warrants your Mastercraft exterior fiberglass door against manufacturing defects in materials and workmanship for limited lifetime from purchase date
STEVES & SONS PRODUCT WARRANTY
STEVES & SONS PRODUCT WARRANTY Steves & Sons Products are designed and built to provide lasting value for your home. We warrant to the original owner, if your Steve & Sons Inc. product exhibits a defect
Architectural/Commercial Doors Interior Limited Warranty
Architectural/Commercial Doors Interior Limited Warranty TM LYNDEN DOOR, INC. P.O. BOX 528 177 WEST MAIN ST. LYNDEN, WA 98264 PHONE (360) 354-5676 FAX (360) 354-3738 The Lynden Door Architectural/Commercial
YOUR NEW MADAWASKA DOORS. Receiving, Maintenance and Warranty
YOUR NEW MADAWASKA DOORS Receiving, Maintenance and Warranty A) RECEIVING MADAWASKA DOORS MERCHANDISE All merchandise must be visually inspected while the driver is present. Make note of any damage to
Molded Panel Series Hollow Core Interior Doors
Part 1: GENERAL 1.2 Product Description: 1-3/4 or 1-3/8 side-hinged door systems manufactured by MASONITE. 1.2.1 Door system components include: door panel(s), bifold panel(s), door frame, hinges. 2.1
CONTEMPORARY COLLECTION
CONTEMPORARY COLLECTION INDEX CONTEMPORARY COLLECTION /0 x /8 LITE HORIZONTAL - LITE - LITE... /0 x 8/0 LITE - LITE - LITE HORIZONTAL... LITE VERTICAL - 7 PANEL... PRODUCT WARRANTY... MAINTENANCE GUIDE...7
Residential Home Limited Warranty
Residential Home Copyright 2018 by Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal Windows &
Maximum Sizes 20 Minute Single : 4 x 9 20 Minute Pair: 8 x 9. Mat formed 32 pound particleboard conforming to ANSI:A208.1 Grade #1-LD
PC-5 Solid Particleboard Door Mat formed 32 pound particleboard conforming to ANSI:A208.1 Grade #1-LD-2-1989. Assembly Adhesive STC Rating 1-3/4 only STC-31 ASTM E9 0-75 AWI Section 1300 PC-5 Western P.O.
Quality. Care. Commitment. series 8000 doors supreme quality
Series 8000 Thermally Broken Aluminum Sliding Door Body copy Subhead Body c Product Specifications Extrusion Details Test Reports Quality. Care. Commitment. series 8000 doors supreme quality 777 Aldridge
INTEGRITY Architectural MILLWORK
INTEGRITY Architectural MILLWORK INCORPORATED 3501 Lake City Industrial Court, Acworth GA, 30101 770-795-8427 INTEGRITY ARCHITECTURAL MILLWORK, INC. ONE YEAR LIMITED WARRANTY FOR WOOD DOORS & WINDOWS Integrity
EXTERIOR DOORS Prehung Program Offering
EXTERIOR S Prehung Program Offering SIGNAMARK.COM FEATURES BENEFITS BEAUTY, FUNCTIONALITY, SECURITY AND ENERGY EFFICIENCY ENVIRONMENTALLY FRIENDLY CFC-FREE POLYURETHANE FOAM CORE PROVIDES INSULATION. HIGH-DEFINITION
1.3 REFERENCE STANDARDS
C/S Acrovyn Doors Section 08210 (08 14 23) Impact Resistant Wood Doors (Barrier Resistant) PART 1 GENERAL 1.1 SCOPE A. All labor, material, equipment, and related services necessary to furnish and install
1.3 REFERENCE STANDARDS
C/S Acrovyn Doors Section 08210 (08 14 23) Impact Resistant Wood Doors (PANEL) PART 1 GENERAL 1.1 SCOPE A. All labor, material, equipment, and related services necessary to furnish and install impact resistant
Façade Architectural Wall Panel System - Guide Specification 3/11/2017 SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.
SECTION 09 7710 FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Decorative ½ / ¾ (13mm/19mm) thick prefinished panel with preengineered attachment clip along with hardware
POLAR WINDOWS + WARRANTY 1 OF 6. General: c) Hardware
WARRANTY 1 OF 6 General: This document sets out the various warranties which Polar Windows Canada Ltd. (also Polar Windows Canada, Polar Windows or Polar ) gives to the Original Consumers of products manufactured
CHAMPAIGN CENTRAL HIGH SCHOOL COMBES GYM FLOOR REPAIR. A. Submittals: Product Data, Specification Sheets, Samples and Manufacturer Warranty.
SECTION 096400 - WOOD FLOORING PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. Submittals: Product Data, Specification Sheets, Samples and Manufacturer Warranty. B. Game lines and logos: Contractor shall
Marlite Guide Specification 2/24/2017 Surface Systems - MAP375 System SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.
Note: This document contains information and notes in hidden text. If you need assistance to view & hide text, instructions are at this link: http://www.marlite.com/hidden-notes-instructions.aspx Delete
This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols.
VIGO INDUSTRIES INSTALLATION GUIDE FOR STANDING SHOWER CABIN (MODEL VG06062) SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the
Product Guide Specification
VT Industries, Inc. November 2012 1000 Industrial Park PO Box 490 Holstein, Iowa 51025 Toll Free (800) 827-1615 Phone (712) 368-4381 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com
Framed Decorative Panel Systems
Note: This document contains information and notes in hidden text. If you need assistance to view & hide text, instructions are at this link: http://www.marlite.com/hidden-notes-instructions.aspx Delete
QUAD Rectangular Hinged Door Shower Enclosure Installation Instructions
QUAD Rectangular Hinged Door Shower Enclosure Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower enclosure. If you have any questions on
JOB NAME SIMULATED STILE AND RAIL MDF DOORS of 8 REVISED 03/01/11 SECTION STILE AND RAIL MDF DOORS
JOB NAME SIMULATED STILE AND RAIL MDF DOORS 08210-1 of 8 SECTION 081433 STILE AND RAIL MDF DOORS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard and fire rated type wood doors with simulated
SECTION SERIES 200 DOUBLE-HUNG VINYL WINDOWS
SERIES 200 DOUBLE-HUNG VINYL WINDOWS PART 1 GENERAL 1.1 SECTION INCLUDES A. Replacement Windows. 1. Double hung windows 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100:
EXTERIOR DOORS Prehung Program Offering
EXTERIOR S Prehung Program Offering SIGNAMARK.COM FEATURES BENEFITS BEAUTY, FUNCTIONALITY, SECURITY AND ENERGY EFFICIENCY ENVIRONMENTALLY FRIENDLY CFC-FREE POLYURETHANE FOAM CORE PROVIDES INSULATION. HIGH-DEFINITION
RAY-CORE Structural Insulated Roof and Wall Panels
SUBMITTAL 20180101 RAY-CORE Structural Insulated Roof and Wall Panels Closed Cell Polyurethane Foam Insulation Douglas Fir Studs STANDARD FEATURES Insulation, Framing and Wrap in a 4 wide panel Available
Rytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262)
Rytec Corporation One Cedar Parkway Jackson, WI 53037 1-888-GO-RYTEC (262) 677-9046 WWW.Rytecdoors.com Pharma-Swing Model Number PSW12002 SECTION 08300 HIGH PERFORMANCE FIBERGLASS SWING DOOR PAIR PART
SINGLE SWING DOOR PAIRED SWING DOOR
Rev. 091416 SINGLE SWING DOOR PAIRED SWING DOOR Drawing No.: Revision: Date: If you need to contact Customer Service Please complete the following information and retain for future reference: Serial Number:
SECTION VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS
SECTION 08211 VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division I Specification
EVOK BEFORE YOU BEGIN PRODUCT REQUIREMENTS. A. Summary Of Key Requirements. B. Product Inspection T01-A INSTALLATION INSTRUCTIONS
EVOK INSTALLATION INSTRUCTIONS ACRYLIC BATH K-1704T BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow
ENAMELED CAST IRON BATHS K-770, K-790, K-810, K-839, K-840, K-850, K-863
ENAMELED CAST IRON BATHS K-770, K-790, K-810, K-839, K-840, K-850, K-863 1. BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials and installation
SECTION PREHUNG WOOD DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08 14 00 PREHUNG WOOD DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2014-2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. French Doors.
EXTERIOR DOORS Prehung Program Offering
EXTERIOR S Prehung Program Offering SIGNAMARK.COM FEATURES BENEFITS BEAUTY, FUNCTIONALITY, SECURITY AND ENERGY EFFICIENCY ENVIRONMENTALLY FRIENDLY CFC-FREE POLYURETHANE FOAM CORE PROVIDES INSULATION. HIGH-DEFINITION
SECTION NEW WOOD WINDOWS. 1. Section Wood Window Restoration. 2. Section Painting.
SECTION 08610 NEW WOOD WINDOWS PART 1 - GENERAL 1.1 SUMMARY A. Provide new wood double hung, casement and awning windows and frames, complete, as shown and specified. 1. The new windows and frames shall
INSTALLATION MANUAL & Warranty Information
ONE PIECE SHOWER STALLS INSTALLATION MANUAL & Warranty Information 255 Hutchings Street Winnipeg, Manitoba R2X 2R4 - Phone: (204) 633-6122 - Fax: (204) 632-4854 Toll Free Phone: 1-800-665-7531 - Toll Free
KWiK N EZ Rigid Track Silicone System
Page 1 of 6 PITTSBURGH CORNING KWiK N EZ Rigid Track Silicone System ASSEMBLY INSTRUCTIONS Introduction The KWiK N EZ Rigid Track Silicone System is the easiest way to install Pittsburgh Corning Thinline
SECTION FLUSH WOOD DOORS
SECTION 081416 PART 1 - GENERAL 1.1 SUMMARY Section Includes: 1. Solid-core doors with wood-veneer faces. 2. Solid-core doors with MDO faces for opaque finish. 3. Pocket doors for folding fire doors. 4.
PITTSBURGH CORNING ASSEMBLY INSTRUCTIONS. KWiK N EZ Rigid Track Silicone System for Thinline Series Glass Block
Page 1 of 6 PITTSBURGH CORNING KWiK N EZ Rigid Track Silicone System for Thinline Series Glass Block ASSEMBLY INSTRUCTIONS Introduction The KWiK N EZ Rigid Track Silicone System is the easiest way to install
Installation Guidelines: Magnolia
Installation Guidelines: Magnolia 3/8 Engineered Hardwood Staple Down Installation ATTENTION Inspect ALL materials carefully BEFORE Warranties DO NOT cover materials with visible defects once they are
SECTION FLUSH WOOD DOORS
SECTION 08211 - FLUSH WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
HAAS-THERM. Commercial Insulated Steel Doors. Models CHT-710, CHT-716, CHT-732, CHT-780, and CHT-790
HAAS-THERM Commercial Insulated Steel Doors Models CHT-710, CHT-716, CHT-732, CHT-780, and CHT-790 1-3/4 Thick CFC-Free, Foam-Injected Polyurethane Core HAAS-THERM commercial insulated sectional doors
DLB-23 Shower Enclosure Installation and User s guide
DLB-23 Shower Enclosure Installation and User s guide I. Mounting Preparation 1. After opening the case, read this introduction carefully, check all the packed parts, examine the shower cabinet for shipping
USG Australasia SHEETROCK. Paper Faced Metal Bead & Trim
USG ustralasia SHEETROK Paper Faced Metal ead & Trim For cost-effective, problem-free corners, the logical choice is USG Sheetrock Paper faced Metal ead and Trim. Fast, easy installation means reduced
AQUA UNO TUB DOOR INSTALLATION INSTRUCTIONS
AQUA UNO TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
Bulldog Coatings, LLC Limited Product Warranty Bulldog Coatings, LLC Finished-to-Order & Custom-Finished products
Bulldog Coatings, LLC Limited Product Warranty Bulldog Coatings, LLC Finished-to-Order & Custom-Finished products (Note: This warranty does not cover Standard Collection products.) Bulldog Coatings, LLC
SECTION STILE AND RAIL WOOD DOORS
SECTION 08 1433 NOTE: THIS SECTION USES THE TERM "ARCHITECT." CHANGE THIS TERM TO IDENTIFY THE DESIGN PROFESSIONAL AS DEFINED IN THE AGREEMENT OR GENERAL CONDITIONS OF THE CONTRACT. PART 1 GENERAL 1.01
Owner s Manual NanaWall Shades
Owner s Manual NanaWall Shades This Owner s Manual contains instructions on the installation, operation, maintenance and warranty of NanaWall Shades. This manual is to be used by the installer for installation
SECTION FLUSH WOOD VENEER DOORS
SECTION 08212 FLUSH WOOD VENEER DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Flush Wood Veneer Doors: 1. Five-ply flush bonded doors. 2. Flush fire-rated wood doors. 3. Lead-lined doors. 4. Sound-retardant
THE BEAUTY OF REAL WOOD. THE ADVANTAGES OF A COMPOSITE.
THE BEAUTY OF REAL WOOD. THE ADVANTAGES OF A COMPOSITE. THE BEAUTY OF REAL WOOD. THE ADVANTAGES OF A COMPOSITE. YOU CAN HAVE IT ALL. MikronWood is a revolutionary new material developed by Quanex Building
MODEL NUMBER: 1419 SERIES
1 PRODUCT DESCRIPTION Semi-Recessed Rectangular Vitreous China Lavatory with Overflow Semi Recessed 2" Above Counter 8" Spread Faucet Drilling Vitreous China High Gloss Ceramic Finish PRODUCT MEASUREMENTS
SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
VILLAGIO FLOORS, INC. TOLL FREE: Fax: VILLAGIOWOODFLOORS.COM. Finish Warranty. Structural Warranty
Finish Warranty Villagio Floors, Inc. warrants to the original purchaser/homeowner (who owns the home in which it was installed) that the finish, when used under normal residential traffic conditions,
WARRANTY Effective April 14, 2008 to May 5, 2009
WARRANTY Effective April 14, 2008 to May 5, 2009 IMPORTANT NOTICE: Read this entire Gienow Windows & Doors Inc. Warranty and Limitations of Liability ( Limited Warranty ) before purchasing or installing
SECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
SECTION SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 511 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification
7 Finishes / Exterior
7 Finishes / Exterior 7.1 Siding is bowed or wavy. Siding shall be installed to accommodate thermal movement and anticipated shrinkage of the structure to which it is attached. Siding shall be generally
Guide Specifications- Section
Guide Specifications- Section 084113 LaCantina ALUMINUM Folding Door System PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum and glass folding door system with fingertip operation up to 52 wide and 10
A M E R I C A N A R C H I T E C T U R A L M A N U F A C T U R E R S A S S O C I A T I O N
A M E R I C A N A R C H I T E C T U R A L AAMA 2410-13 Standard Practice for Installation of Windows with an Exterior Flush Fin Over an Existing Window Frame M A N U F A C T U R E R S A S S O C I A T I
SECTION FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES
SECTION 081613 FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
Aluminum Flush Doors and Frames SPECIFICATIONS. Section [8120] PART 1 GENERAL
![Aluminum Flush Doors and Frames SPECIFICATIONS. Section [8120] PART 1 GENERAL](/thumbs/76/74358555.jpg "Aluminum Flush Doors and Frames SPECIFICATIONS. Section [8120] PART 1 GENERAL")
Aluminum Flush Doors and Frames SPECIFICATIONS Section 081116 [8120] Cline Aluminum Doors, Inc. 112 32nd Avenue West Bradenton, FL 34205-8907 Toll-Free (800) 648-6736 Office (941) 746-4104 Fax (941) 746-5153
Engineered Hardwood Residential Care and Warranty
Engineered Hardwood Residential Care and Warranty Golden Field Corporation. Pty Ltd TIMBER FLOORING SPECIALISTS, IMPORTER. 13 Olver Street, Preston Vic 3072. ABN: 52 100 767 217 1 Care and maintenance
MISER-THERM. Commercial Insulated Steel Doors. Models CMT-610, CMT-616, CMT-680, and CMT-690
MISER-THERM Commercial Insulated Steel Doors Models CMT-610, CMT-616, CMT-680, and CMT-690 1-3/8 Thick CFC-Free, Foam-Injected Polyurethane Core Haas Door s MISER-THERM commercial insulated sectional doors
COMPONENT SUMMIT ELITE SUMMIT DESIGNER VISION ELITE VISION
Atlantic Windows Unparalleled Warranty - 2016 At Atlantic Windows we are proud to offer a window, patio sliding door and entrance system warranty that is unparalleled in the industry. You can expect the
SECTION WOOD GYMNASIUM FLOORING
HORNER MULTISPORT ULTRA SYSTEM Page 1 of 1 SECTION 096466 --- WOOD GYMNASIUM FLOORING PART 1-GENERAL 1.1 DESCRIPTION A. This document specifies a wood strip athletic floor system consisting, in general,
Grand Mesa Plus. 27yr Residential Warranty. 5yr Lt. Commercial Warranty
- Triple Plate Embossing Hand-Sculpted Wire Brushed Texture Registered & Embossed Micro-Bevel Edge Waxed Edges Unilin Drop Lock Grand Mesa Plus 12.3mm Laminate Flooring - Unilin Locking System* 6.5 Width
Showcase Moulding, Inc Simpson Way Escondido, CA / Fax.
Showcase Moulding, Inc. 1233 Simpson Way Escondido, CA 92029 760-735-8746 / 760-735-8776 Fax www.showcasemoulding.com March 2011 We offer a wide variety of products including: - Mirrored Wardrobe Doors
Proposed Specification Section FLUSH WOOD VENEER DOORS
Proposed Specification Section 08210 FLUSH WOOD VENEER DOORS PART I, GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The General Conditions, Supplementary Conditions and General Requirements apply to all
and Care and Maintenance
Composite GARAGE DOORS Painting, Staining Instructions and Care and Maintenance Table of Contents Painting Instructions........... 2 Care and Maintenance for Painted Garage Doors... 3 Staining Instructions...........
10331 Date Street Murrieta, CA SECTION HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS
09/20/2017 10331 Date Street Murrieta, CA 92562 info@foremanproducts.com 951-677-1955 SECTION 10 5130 HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS PART 1 GENERAL Specifier Notes: This product specification
Warranty and Instructions for ordering with contract
Warranty and Instructions for ordering with contract Reclaimed Lumber Products (RLP) is the manufacturer providing this warranty and contract. 3424 North Can Ada Road Nampa, Idaho 83687 www.reclaimedlumberproducts.com
SECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware.
1 SECTION 08 4210 ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1. Lock cylinders
A. ASTM C190 - Test Method for Tensile Strength of Hydraulic Cement Mortars
SECTION 04850 (04 40 00) MSI PRECAST STONE VENEER SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. MSI Precast Stone Veneer for exterior and interior vertical surfaces. 1.2 RELATED SECTIONS Specifier Notes:
Beam Mantel Installation Instructions
Fypon s look so realistic, it s difficult to distinguish them from real wood. They are lightweight and require no additional structural support. Our installation instructions provide information about
TORERO TUB DOOR INSTALLATION INSTRUCTIONS
TORERO TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
Series - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
Filament Wound Architectural Columns: Blending Tradition with Technology
Filament Wound Architectural Columns: Blending Tradition with Technology These unique patented filament wound columns help preserve the past with authentic, perfectly detailed structure that is architecturally
SECTION SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 416 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
INSTALLATION GUIDE MODELS DMV2402 / DMV3002 / DMV3602
INSTALLATION GUIDE MODELS DMV2402 / DMV3002 / DMV3602 Getting Started 01 Required Tools & Materials 01 Floating Vanity Installation 02 Drawer & Door Adjustment 03 Soft-Close Drawer Removal/Installation
CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10
CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES 283 Chapter 10 FUNCTIONAL REQUIREMENTS FUNCTIONAL REQUIREMENTS 10.1 PLASTERWORK Workmanship i. All workmanship must be within the tolerances
SECTION SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS
SECTION 08 36 00 SECTIONAL OVERHEAD DOORS 424 SERIES SECTIONAL STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on
Installation and Care Guide
Installation and Care Guide Freestanding Bathtubs This Guide is for the following Freestanding bathtubs: FP SERENADE FG HARMONY FD ARIA FM DUET Thank you for allowing SONG the honor of earning your business.
AMBICO Limited Section and WOOD BULLET RESISTANT DOORS AND FRAMES Page 1
Page 1 This section includes Bullet Resistant, Wood Doors and Bullet Resistant Steel Frames which meet the UL752 Standard for Bullet-Resisting Equipment. This section relies on both the Canadian Steel
3000 Series Bay/Bow Windows
3000 Series Bay/Bow Windows 3000 SERIES FIBERGLASS - Min 4 0 3 0 Max 8 0 5 0 Bay picture Bay awning (refer to casement/awning section for maximum vent size) - Min 4 0 3 0 Max 8 0 5 0 (refer to casement/awning
SUPERIOR DOORS. Product. Scope. Building Regulations. Appraisal No. 787 [2012] Appraisal No. 787 (2012) Amended 13 September 2016.
![SUPERIOR DOORS. Product. Scope. Building Regulations. Appraisal No. 787 [2012] Appraisal No. 787 (2012) Amended 13 September 2016.](/thumbs/89/97634569.jpg "SUPERIOR DOORS. Product. Scope. Building Regulations. Appraisal No. 787 [2012] Appraisal No. 787 (2012) Amended 13 September 2016.")
Amended 13 September 2016 BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 Superior Doors are a range of hollow and solid core doors for interior use and solid
ISIMET. E Series Enclosure. Custom Assemblies Installation, Maintenance, and Operation Instructions
ISIMET E Series Enclosure Custom Assemblies Installation, Maintenance, and Operation Instructions The Custom Assembled E-Series Enclosures is pre-assembled and pre-wired enclosure intended for use with
CHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES
CONTENTS 10.1 PLASTERWORK 10.2 2 ND AND 3 RD FIX FINISHES FUNCTIONAL REQUIREMENT 10.1 Plasterwork Workmanship Design Technical Manual TS-011-09-010412 i. All workmanship must be within defined tolerances
3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows
3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows 3000 SERIES FIBERGLASS - Min 1 6 2 9 Max 4 0 7 0 - Min 3 0 2 9 Max 8 0 7 0 Double-Hung Double Double-Hung - Min 4 6 2 9 Max 12 0 7 0 Minimum
SECTION WOOD GYMNASIUM FLOORING
HORNER VARI-CUSHION SYSTEM Page 1 of 3 SECTION 096466 --- WOOD GYMNASIUM FLOORING PART 1-GENERAL 1.1 DESCRIPTION A. This document specifies a wood strip athletic floor system consisting, in general, of
DOWSIL Silicone Transition System: Application Guide Build a Better Barrier
High Performance Building Consumer Solutions DOWSIL Silicone Transition System: Application Guide Build a Better Barrier DOWSIL Silicone Transition System Application Guide The DOWSIL Silicone Transition
BIOVE PRODUCT REQUIREMENTS. A. Introduction. B. Installer Hazard Notification. A. Summary Of Key Requirements. B. Product Inspection T01-B
BIOVE K-8277T/K-8277T-GR BLISS K-17270T/K-17270T-GR ENAMELED CAST IRON BATH INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN Introduction Please read these instructions carefully to familiarize yourself with
jazz wide efficiency weather tightness durability er tightness durability energy efficiency royalplast.ca
royalplast.ca jazz wide lity energy efficiency weather tightness efficiency weather tightness durability er tightness durability energy efficiency jazz sashes m Wide stiles & rails sash m Colonial look
Installation Guidelines for all Quaker products with nail fins New construction nail fin installation with a drainable weather resistant barrier.
www.quakerwindows.com www.quakercommercialwindows.com PO Box 128 504 Highway 63 South Freeburg, MO 65035 800-347-0438 573-469-4151 (fax) Installation Guidelines for all Quaker products with nail fins New
Pry Bar or Pull bar Hammer Spacing Wedges Rubber Mallet Safety Equipment (Goggles and Mask)
strand at ease installation instructions strand at ease installation instructions: ECOFINISHES RECOMMENDS USING THE SERVICES OF A PROFESSIONAL HARDWOOD FLOORING INSTALLER. READ THESE INSTRUCTIONS THOROUGHLY
Guide Specifications- Section
Guide Specifications- Section 084113 LaCantina ALUMINUM Folding Door System PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum and glass folding door system with fingertip operation up to 52 wide and 10
SECTION VINYL CLAD FLUSH WOOD DOORS
SECTION 08212 VINYL CLAD FLUSH WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947
WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947 WEATHER BREAKER MODEL 175 Whether you are keeping the cold out or in, nothing makes better sense for your manufacturing facility or warehouse
WARRANTY DOCUMENT TWENTY FIVE YEAR DOMESTIC COATING WARRANTY
WARRANTY DOCUMENT INTRODUCTION Eastbourne Trading Pty Ltd ABN21141046326 ( the supplier ) is pleased to provide the following manufacturer s warranties for the French Oak Floors timber flooring range: