"CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS"
|
|
- Christiana Hodges
- 6 years ago
- Views:
Transcription
1 PRESENTER'S GUIDE "CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow
2 OUTLINE OF MAJOR PROGRAM POINTS
3 OUTLINE OF MAJOR PROGRAM POINTS The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting a classroom session, as well as in preparing to lead a class discussion about the program. A construction site is a busy place. Framing, trenching and demolition may be going on. A variety of tools and machinery are being used. Heavy equipment is operating, and other vehicles are on the move. Materials are being delivered and stored. In the midst of all this, accidents can happen and people can get hurt, even killed. That's why one out of every five workplace fatalities in the U.S. is a construction worker. A significant number of these deaths result from one type of situation. OSHA calls these "caught-in/between" accidents. Caught-in/between hazards are one of the four top causes of fatalities in construction work. Caught-in/between injuries result from being squeezed, caught, crushed, pinched or compressed between two or more objects. Caught-in/between accidents can occur between: One moving and one stationary object. Two or more moving objects. Within machinery with moving parts. 1
4 Examples of caught-in/between accidents include being: Buried by loose earth when the walls of a trench collapse. Crushed between vehicles, equipment or materials. Caught and drawn into operating machinery. Workplace accidents like these, and the injuries they cause, are unpleasant to think about. But the better we understand these hazards, the easier it will be to recognize them on our job sites, and take steps to prevent accidents before they occur. The Occupational Safety and Health Administration (OSHA) has grouped the most common types of caught-in/between accidents into three categories. The first two are called "buried in or by" and "pinned between" accidents. The third category involves situations where workers are caught in unguarded machinery. Most "buried in or by" accidents happen in trenching work, when the walls of an unprotected trench collapse. Since a square yard of soil can weigh a ton or more, trench cave-ins can easily crush or suffocate people. Being trapped in a trench can also expose workers to other hazards, such as: Contaminated atmospheres. Exposed utility lines. Water, sewage or chemicals that have collected there. These can cause poisoning, burns, electrocution and even drowning. 2
5 Trenches are not the only danger zones. "Buried in or by" accidents can also result from: Scaffolding that collapses on workers. Walls that cave in unexpectedly during demolition work. "Pinned between" accidents occur when workers are caught between: Equipment, such as a forklift, and a solid object, like a wall. Materials that are being stored and objects such as a parked vehicle or piece of equipment. Construction materials and the shoring system of a trench. "Pinned between" hazards can result in serious injuries, including broken bones, asphyxiation, or even death. The power tools, machinery and other equipment that are indispensable to so many construction jobs can also "do a job" on you if you're not careful. When their moving parts are not properly guarded, your hands, feet or the clothing you're wearing can get caught in them. You can also be drawn into equipment that starts up unexpectedly while you're servicing it. Just like other "caught-in/between" situations, these can cause serious injuries, including strangulation, crushing, amputation or death. As we've discussed, all of these caught-in/between hazards can be prevented. For instance, the "buried in or by" hazards that you may encounter in a trench, while you're working around scaffolding or during demolition work can be addressed by safety policies and procedures that are implemented by your employer. 3
6 To combat trenching and shoring hazards they will follow OSHA's Trenching and Shoring Standard's guidelines Assessing your work sites to identify and resolve potential hazards. Installing protective systems to prevent cave-ins or protect you from their effects. Implementing procedures for preventing equipment and materials from falling into a trench. Training you on how to recognize unsafe trenching conditions and avoid them. The safe work practices that you can use to reduce your caught-in/between risk while around a trench include: Never working in an unprotected trench that is 5 or more feet deep. Never entering a trench of any depth that has not been approved for work by the "competent person" who is overseeing the project. Always staying inside a trench's protective system. If a trench cave-in does occur, do not enter the trench to try to rescue a coworker. You could get trapped by a secondary cave-in and become a casualty yourself. To avoid being "buried in or by" excavated soil: Never pass underneath or work below loads that are being handled by lifting or digging equipment. Always stand clear of any vehicle that is being loaded or unloaded. OSHA has also established standards for scaffolding construction and demolition procedures that help to reduce the risk of workers being buried during these activities. 4
7 To prevent collapses, all scaffolding work must be performed under the supervision of a competent person, who ensures that proper procedures are followed. During demolition work: Free-standing walls that are more than one story tall and were not designed to stand alone, or are thought to be unsafe, must be reinforced with lateral bracing. All jacks and raised loads must be cribbed, blocked or otherwise secured. To protect yourself from caught-in/between hazards involving vehicles and heavy equipment, you should start with the basics. Make a habit of knowing where all of the machinery is on your job site. Use caution while you're in its vicinity, whether it's operating or not. Stay a safe distance away at all times. Pay special attention to equipment that is backing up. Some "pinned between" accidents occur when vehicles or equipment tip over because of soft or uneven ground on a site. Your employer will have taken steps to address hazards like these, but keeping your distance will keep you safe if a tipover or other mishap does occur. Certain types of equipment, such as backhoes, cranes and excavators, have booms that swing back and forth as they operate. Sometimes the superstructure of the machinery may rotate as well. The ground that is covered when they move is called their "swing radius". 5
8 This swing radius can be a serious caught-in/between danger zone. Always stay out of the radius area to avoid being caught between the body of the equipment and its moving parts. Never stand between the swinging parts of the machines and stationary objects, such as the walls of a trench, stacks of materials or other equipment. Don't put yourself between loads of materials that are being hoisted and any immovable objects, either. Make sure that loads that are being lifted are rigged so that they remain stable while they're being moved, and that they are stacked securely. To avoid caught-in/between accidents while you're maintaining or repairing vehicles or heavy equipment: Always turn the machine off before you begin work. Never work on a machine if you have not been trained for it. You employer will have lock-out/tag-out procedures in place to ensure that equipment is not accidentally energized while you're working on it. Lock-out/tag-out is required for all equipment that is used in concrete and masonry operations, and many other types of equipment as well To find out more about your lock-out/tag-out program, talk to your supervisor. To ensure that equipment is safe before you start any maintenance or repair work, or when shutting it down, always fully lower or block blades, buckets, load beds and any other moving parts that could suddenly shift position. 6
9 Powered tools and machinery on a job site can also create caught-in/between hazards. "Machine guards" should prevent workers from coming into contact with their moving parts. Machine guards that are out of adjustment, disabled or missing can create very dangerous situations for people who work on or around the equipment. Since these tools have to be powerful to handle day-today construction tasks, if their moving parts catch hold of a hand, foot or piece of clothing, that power ends up being applied to your body, and the results can be tragic. So you should: Never use tools or machinery that you have not received training on. Carefully inspect any equipment you are using before you start your work. Check that machine guards are in place and working correctly. If any of the guards are out of adjustment, fix them. If they are damaged or missing, replace them. If all else fails, take the equipment out of service. Label it "damaged", so no one else uses it by mistake. Never disable or remove the guards on any tool or machine yourself. Be careful not to wear anything that could get caught and cause you to be drawn into the equipment you're working with. 7
10 You may find it necessary as part of your work to replace blades, bits or other parts on power tools and other equipment. To avoid caught-in/between accidents turn the equipment off and disconnect it from its power source before you begin. If necessary, lock out and tag the power source so the machine can't be activated by accident. Block or otherwise secure the machine's moving parts if you can, so they can't move. If you need to remove a machine's guards to service it, make sure to put them back on and that they're working correctly when you're done. * * * SUMMARY * * * "Caught-in/between" hazards are one of the leading causes of fatalities in construction work. They occur when workers are caught, compressed or crushed between two or more objects, or in machinery. "Buried in or by" accidents occur most often in trenching work, so never enter an unprotected trench. Avoid "pinned between" accidents by being aware of all the vehicles and equipment on your job site. To avoid being caught in tools or machinery always inspect it, and don't use it if its guards have been disabled or removed. No matter how busy a job site becomes, caughtin/between hazards can't sneak up on you if you're looking for them. Now that you know what to watch for and how to combat any problems that you see, you and your coworkers can go home injury-free every day! 8
Trenching and Shoring Safety in Construction Environments. Leaders Guide and Quiz
Trenching and Shoring Safety in Construction Environments Leaders Guide and Quiz 4843 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order
More informationTimber Times. Safety Flyer SPECIAL POINTS OF INTEREST. Partners for Healthy Forests
Timber Times Partners for Healthy Forests SPECIAL POINTS OF INTEREST Pinch Point Safety How to Prevent Pinch Point Accidents Keep Your Guard Up LO/TO Helpful Links Bad Safety Photos Safety Flyer SEPTEMBER
More information"WALKING AND WORKING SURFACES IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "WALKING AND WORKING SURFACES IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR
More informationFocus Four Caught-In or-between Hazards
Focus Four Caught-In or-between Hazards This page intentionally blank OSHAcademy Study Guide 807: Focus Four Caught-In or Between Hazards No portion of this text may be reprinted for other than personal
More information29 CFR 1926 Construction Subpart P
Industry code # 1781 Water Well Drilling Special trade contractors primarily engaged in water well drilling. (Establishments primarily engaged in drilling oil or gas field water intake wells on a contract
More informationMechanic killed by excavator bucket during maintenance
OREGON FATALITY ASSESSMENT AND CONTROL EVALUATION www.ohsu.edu/croet/face Center for Research on Occupational and Environmental Toxicology Fatality Investigation Report SPECIAL ALERT -- Activation of machine
More informationSAFETY AUDITS. Leader s Guide. Marcom Group Ltd.
1607 SAFETY AUDITS Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order, so that employees will see the relationships between the various
More informationMANAGER'S TOOLKIT. Behavior-Based Safety
MANAGER'S TOOLKIT Behavior-Based Safety SPONSORED BY FORUM EVENTS Manager s Toolkit: Behavior-Based Safety Although most safety programs and research center around safe work practices and engineering solutions
More informationWALKING AND WORKING SURFACES. Leader s Guide. Marcom Group Ltd.
1608 WALKING AND WORKING SURFACES Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships between
More informationHealth and Safety Policy
Health and Safety Policy Policy statement Brunk is committed to meeting our health and safety goals for all processes, and to maintaining a safe and healthy workplace. It is Brunk s policy to provide a
More informationThe Construction Industry
The Construction Industry 90% of Construction Employers have 20 or less employees. The industry typically has very high turnover rates. Most are multi-employer worksites. Over half of OSHA compliance inspections
More informationTRENCH SAFETY TRAINING
TRENCH SAFETY TRAINING TRENCH SAFETY TRAINING TRENCHING ACCIDENTS ACCOUNT FOR MORE THAN 100 DEATHS A YEAR ON U.S. SOIL. 11 TIMES MORE WORKERS ARE INJURED 1% OF ALL CONSTRUCTION ACCIDENTS INJURY RATE FOR
More informationThe Control of Hazardous Energy (Lockout/Tagout) California State University Chico
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico Department of Environmental Health and Safety Reviewed March 2012 TABLE OF CONTENTS Section Page 1.0 INTRODUCTION... 1-1
More informationWalking and Working Surfaces in Construction Environments. Leader s Guide and Quiz
4786 Walking and Working Surfaces in Construction Environments Leader s Guide and Quiz INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order
More informationSAFETY BOB S CONSTRUCTION SAFETY ORIENTATION
ERI Safety Videos Videos for Safety Meetings 2712 SAFETY BOB S CONSTRUCTION SAFETY ORIENTATION Leader s Guide 2007 ERI Safety Videos SAFETY BOB S CONSTRUCTION SAFETY ORIENTATION This easy-to-use Leader
More informationExcavations. OSHA Office of Training and Education 1
Excavations OSHA Office of Training and Education 1 Excavation Hazards Cave-ins are the greatest risk Other hazards include: Asphyxiation due to lack of oxygen Inhalation of toxic materials Fire Moving
More informationJob Safety Health Quarterly Job Safety & Health Quarterly
22 22 Job Safety Health Quarterly Protecting Construction Workers from Power Lines by Earl W. Hicks Power Lines and Electrocutions Every day four construction workers die on the job in this country. Think
More informationExcavation & Trenching. A Trenching Tragedy
Excavation & Trenching 1926 Subpart P A Trenching Tragedy False sense of security Knew they were out of compliance Thought the soil was stable Conditions changed overnight A worker died 1 What Is an Excavation
More informationContents. Before you begin. Introduction: Installing trench support 1. Element 1: Planning and preparing 3
Contents Contents Before you begin v Introduction: Installing trench support 1 Element 1: Planning and preparing 3 Section 1.1 Accessing, interpreting and applying compliance documentation 4 to the work
More informationScaffolds. OSHA Office of Training & Education 1
Scaffolds OSHA Office of Training & Education 1 What Is A Scaffold? An elevated, temporary work platform Three basic types: Supported scaffolds -- platforms supported by rigid, load bearing members, such
More informationMMM MASONRY, INC. Employee Safety Guidelines
MMM MASONRY, INC. Employee Safety Guidelines This manual represents common hazards associated with masonry construction and is no way intended to replace the OSHA 29CFR 1926 Safety Standards. It is the
More informationScaffolds. OSHA Office of Training & Education 1
Scaffolds OSHA Office of Training & Education 1 What Is A Scaffold? An elevated, temporary work platform Three basic types: Supported scaffolds -- platforms supported by rigid, load bearing members, such
More informationUNIVERSITY OF ROCHESTER ENVIRONMENTAL HEALTH & SAFETY
Revision No.: New Page 1 of 10 I. PURPOSE Machine guarding is an essential element of providing a safe and healthful environment for employees and others in any facility. Serious injury can result from
More informationToday we re going to talk about working safely around forklifts. Forklifts are essential pieces of equipment that help us move mountains of heavy
Today we re going to talk about working safely around forklifts. Forklifts are essential pieces of equipment that help us move mountains of heavy materials. But forklifts are also dangerous especially
More informationPurpose of Excavation Training
EXCAVATIONS Purpose of Excavation Training Provide an overall awareness of hazards associated with excavation sites. Competent Person Underground Utility Lines Protective Systems (Sloping, Shoring, Shielding
More informationEffective Date: 10-January Table of Contents
Version: 3 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 2 Environmental Health and Safety Office (EHSO) and Emory Healthcare
More informationCONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER EDUCATION 3835 East Thousand Oaks Boulevard, #365 Westlake Village, California 91362 Telephone: (805) 494-0444 Facsimile: (805) 494-0441
More informationThe Control of Hazardous Energy (Lockout/Tagout)
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico Department of Environmental Health and Safety February 2018 TABLE OF CONTENTS Section Page 1.0 Introduction... 1-1 1.1
More informationToday we re going to talk about job hazard analysis. Job hazard analysis, or JHA as it s often called, is an essential part of our safety program.
Today we re going to talk about job hazard analysis. Job hazard analysis, or JHA as it s often called, is an essential part of our safety program. Through JHA, we are able to identify workplace hazards
More informationTHE NEW CRANE STANDARD
THE NEW CRANE STANDARD By Molly O Brien FDRsafety December 2012 Summary While cranes and derricks do make the movement of heavy materials much easier for workers, many safety hazards are associated with
More informationMachine Guarding and Maintenance
1. Identification of Workplace Hazard Machine Guarding and Maintenance The exposed moving parts of machinery can cause serious injuries to an employee who is inadvertently caught by the machine. Hazardous
More informationExcavation & Trench Safety 1
Excavation & Trench Safety 1 Excavation Hazards 2 Cave-ins are the greatest risk Other hazards include: Asphyxiation due to lack of oxygen Inhalation of toxic materials Fire Moving machinery near the edge
More informationPRESENTER'S GUIDE "WAREHOUSE SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...
PRESENTER'S GUIDE "WAREHOUSE SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM POINTS
More informationConstruction Site Safety
Construction Site Safety Half (1/2) Continuing Education Hour Course #OS101 Approved Continuing Education for Design Professionals (Professional Engineers, Land Surveyors, Architects, etc.) EZ-pdh.com
More informationLIFE SAVING RULES. Speaker Support Pack for Employee and Contractor Induction. This contains: Preparation guidance Script notes Q&As.
LIFE SAVING RULES Speaker Support Pack for Employee and Contractor Induction This contains: Preparation guidance Script notes Q&As Page 1 of 33 The Life-Saving Rules Speaker Support Pack (to be used with
More informationNational Safety Council Construction and Utilities Division May 21, 2018
National Safety Council Construction and Utilities Division May 21, 2018 Dean McKenzie, Director Directorate of Construction Occupational Safety and Health Administration Agenda Statistics Regulatory Trenching
More informationMACHINE GUARDING & OPERATOR SAFETY
MACHINE GUARDING & OPERATOR SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the
More informationRisk Control at United Fire Group
INTRODUCTION work can be a very hazardous exposure to employees and other contractors on construction job sites. is one of the most hazardous construction operations. The most feared hazard is excavation
More informationStruck-by Toolbox Talk # 1 How Can We Be Safe Around Equipment?
Struck-by Toolbox Talk # 1 How Can We Be Safe Around Equipment? Ask the following questions and give time for answers. What are the hazards? Employees working around heavy equipment are exposed to pinch
More information6 SAFETY CULTURE ESSENTIALS
6 SAFETY CULTURE ESSENTIALS Many organizations want to improve their safety culture in order to reduce injury rates, save money, and increase productivity. But how does a company begin to foster a culture
More informationDate Prepared: Location: Time: Approximate Temperature (degrees F): Weather Conditions: Project Name:
Appendix C Hazard Assessment and Trench Entry and Authorization Form for regularly scheduled and emergency trenching activities Date Prepared: Location: Time: Approximate Temperature (degrees F): Weather
More informationSafety Meeting. Meeting Leader Instructions. Safety, Teamwork & Our Customer s 1 st Choice
Meeting Leader Instructions These meetings are more than safety meetings. While they address safety as a top priority, these meetings are also an opportunity for you to interact with your team; a chance
More information2012 Master Builders Annual Convention February 21, 2012 Des Moines, IA
Iowa Events Center OSHA Update/Inspections 2011 Review, Expectations, Rights, Processes & More 2012 Master Builders Annual Convention February 21, 2012 Des Moines, IA Tom VanderLinden Executive Officer
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT Principal Contractor: ROBERT LIVINGSTONE Project Address: 123 SYDNEY ROAD SYDNEY NSW 2000 High Risk Work Hazards and Risks Identified Control Measures Persons working at a height
More informationProgramme-Based Engagement Technical Advisory for Concrete Pre-cast Industry
Precast_PREVIEW 5/30/07 3:27 PM Page 1 5. References Ministry of Manpower, Singapore, Workplace Safety and Health Risk Management: Risk Assessment Guidelines 2006 Queensland Government, Tilt-up and Pre-cast
More informationExcavation and trenching safety
Excavation and trenching safety MNOSHA Compliance fatality investigations FFYs 2012 through 2016 During the period from Oct. 1, 2011, through Sept. 30, 2016, the annual average number of fatalities under
More informationMarshall Municipal Utilities EXCAVATIONS AND TRENCHING Effective August 1, 2011 Revised August 17, 2017
Marshall Municipal Utilities EXCAVATIONS AND TRENCHING Effective August 1, 2011 Revised August 17, 2017 POLICY This policy applies to all open excavations and trenches; including those excavations and
More informationCLOSE CALLS AND NEAR MISSES. This easy-to-use Leaders Guide is provided to assist in conducting a successful presentation.
CLOSE CALLS AND NEAR MISSES This easy-to-use Leaders Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the subject
More information"DOT HAZMAT SAFETY TRAINING"
PRESENTER'S GUIDE "DOT HAZMAT SAFETY TRAINING" For the Department of Transportation's 49 CFR 172.700 Subpart H Training Requirements Quality Safety and Health Products, for Today... and Tomorrow OUTLINE
More informationGUIDE TO IMPLEMENTING AN EFFECTIVE SAFETY PROGRAM
GUIDE TO IMPLEMENTING AN EFFECTIVE SAFETY PROGRAM NAHB Builder s Show Orlando, Florida February 2008 Leon Rogers President Construction Management Associates, LLC PO Box 867 Thayne, WY 83127 (801) 310-0035
More informationExcavation General Awareness Safety Training Presentation Red Willow Production Co.
Excavation General Awareness Safety Training Presentation Red Willow Production Co. Learning Objectives Understand the purpose of our Excavation SOP - to protect employees and contractors when working
More informationYour health and safety guide to Plant
Your health and safety guide to Plant Edition 2 June 2017 Contents Introduction 1 About the problem 2 What is plant? 2 What injuries can plant cause? 2 Your legal duties 3 The law 3 Employers 3 Self-employed
More informationTailgate Topic Review
[PP 08/05/2018-08/18/2018] Scaffold-Ladder Safety Important Scaffolding Safety Tips For Workers Every year in the United States there are thousands of scaffold-related injuries and roughly 40 scaffold-related
More informationHEALTH AND SAFETY MANUAL
HEALTH AND SAFETY MANUAL Title: Concrete and Masonry Construction Approved by: Greg Savoy Rev. 1/1/08 1 Purpose/Scope: This program sets forth safety requirements and hazard controls for concrete or grout
More informationAll employees who perform work which requires the removal of material that exceeds a depth of 1.2 meters (4 feet).
POLICY NO.: 12.4.6 EFFECTIVE DATE: January 26, 2004 PAGE: 1 OF 6 POLICY STATEMENT: Working in a trench can be hazardous. This policy, in combination with the Trenching, Shoring, and Excavating Program,
More informationThe consequences of not controlling forklifts and operators in the workplace. Are these classified as forklifts? What is a Powered Industrial Truck?
Experimental Employee Motivational Technique LIFT TRUCK SAFETY FOR THE PULP AND PAPER INDUSTRY Presented by David Hoover What is a Powered Industrial Truck? A mobile, power-driven vehicle used to carry,
More informationOSHA RECORDKEEPING FOR MANAGERS AND SUPERVISORS
1805 OSHA RECORDKEEPING FOR MANAGERS AND SUPERVISORS Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order so that employees will see
More informationExcavations. OSHA (Revised)
Excavations OSHA 2226 2002 (Revised) Contents Introduction... 1 What is the difference between an excavation and a trench?... 1 What are the dangers of trenching and excavation operations?... 1 OSHA s
More informationOPERATOR S MANUAL. LINKIT Series LKB Roofing Conveyor. Models: LKB-26E & LKB-32E. InterQuip USA LLC interquip.net DISTRIBUTED BY:
OPERATOR S MANUAL LINKIT Series LKB Roofing Conveyor Models: LKB-26E & LKB-32E DISTRIBUTED BY: InterQuip USA LLC 203.322.2600 interquip.net 1 IMPORTANT Read, understand and obey these safety rules and
More informationScissor Lift Safety for Clients and Employees or ARS
ADVANCED RESOURCE SOLUTIONS INNOVATIVE SOLUTIONS FOR PROJECT SUCCESS Scissor Lift Safety for Clients and Employees or ARS Added 1/20/2017 Employees: Guidelines addressed in OSHA 1926.451; 1926.452(w);
More informationSAFETY FACT SHEETS. Working with and around High Risk Plant Safety Non Negotiable. G-HS-ST Working with and around High Risk Plant
SAFETY FACT SHEETS Working with and around High Risk Plant Safety Non Negotiable G-HS-ST-00741 Working with and around High Risk Plant Safety Non-Negotiables (SNN) Zinfra Group is committed to providing
More informationToolbox Talk. OSHA Top Ten FY 2017
Name of Company OSHA Top Ten FY 2017 As it does each year, the Occupational Safety and Health Administration (OSHA) recently released their list of the Top Ten most frequent safety violations. A new entry
More informationExcavation and Trenching
Excavation and Trenching Excavation and trenching are among the most hazardous construction operations. The Occupational Safety and Health Administration s (OSHA) Excavation standards, 29 Code of Federal
More informationUniversal-Fit LIFT HOOK - Model 1371B
4101 GARLAND DR, FORT WORTH, TX 76117 Ph 817-485-6073 Fax 817-428-6008 www.starindustries.com Bulletin LH- OM0510B Universal-Fit LIFT HOOK - Model 1371B Installation, Use & Safety Precautions SPECIFICATIONS:
More informationSAFETY BOB S COMPREHENSIVE CONSTRUCTION SAFETY ORIENTATION
ERI Safety Videos DVDs, Digital Media & Custom Production 1315 SAFETY BOB S COMPREHENSIVE CONSTRUCTION SAFETY ORIENTATION Leader s Guide ERI Safety Videos SAFETY BOB S COMPREHENSIVE CONSTRUCTION SAFETY
More informationTo establish the Panama Canal Authority (ACP) occupational safety requirements for excavations.
1.0 PURPOSE To establish the Panama Canal Authority (ACP) occupational safety requirements for excavations. 2.0 BACKGROUND Excavation activities are highly dangerous and thus require adequate planning
More informationSafety Meeting Topic #21 Trenches/Excavations
Safety Meeting Topic #21 Trenches/Excavations Excavation and trenching cave-ins result in more than 100 fatalities annually in the United States. With little or no warning, an unsupported, improperly-shored
More information"SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series "Quality Safety and Health Products, for Today...and Tomorrow" OUTLINE OF MAJOR
More informationDelaware State University
Delaware State University University Area Responsible: Risk and Safety Management Policy Number & Name: 7-05: Lockout/Tag-out Policy Approval Date: 7/28/11 Revisions: 8/7/2013 Reviewed: 7/26/2013 Related
More informationHazards. Struck-by Electrocution Falls Caught In-Between
References EM 385-1-1 Section 31 and Appendix P 29 CFR 1910.67 Vehicle mounted elevating work platform 29 CFR 1910.132 - PPE General Requirements 29 CFR 1910.135 Head Protection 29 CFR 1910.266 Logging
More informationCaptain Stephen M. Hardesty Howard County Department Of Fire & Rescue Services Special Operations
Captain Stephen M. Hardesty Howard County Department Of Fire & Rescue Services Special Operations Introduction Trench and Excavation Safety Laws, Regulations and Standards Handling Trench Emergencies Question
More informationForklift Safety for Supervisors
Forklift Safety for Supervisors Supervisor s responsibilities > Ensure new employees understand the requirement for specific equipment training. Forklifts (we use 5 classes (or OSHA classifications) of
More information"WORKING SAFELY WITH SUSPENDED SCAFFOLDING"
MAJOR PROGRAM POINTS "WORKING SAFELY WITH SUSPENDED SCAFFOLDING" Training for the OSHA SCAFFOLDING STANDARD "Quality Safety and Health Products, for Today...and Tomorrow" OUTLINE OF MAJOR PROGRAM POINTS
More informationCOMMONWEALTH SCAFFOLD Quality Scaffolding Across New England
Prepared by Allied Insurance Brokers, Inc. Commonwealth Scaffold, LLC Lockout/Tagout Program and Training Materials Effective Date: 12/14/2012 Revision #: Table of Contents Lockout/Tagout Program... 1
More informationOverhead Power Lines. Corporate Safety Policy Overhead Power Lines. (Cont.)
Corporate Safety Policy Overhead Power Lines Last Modified: JAN 2013 1 of 6 Overhead Power Lines I Purpose To provide procedures, for working on overhead power lines or in their vicinity on COMPANY sites,
More informationPIN s genericone time use access to the registration system online. PIN s are not tied to
1 2 PIN s genericone time use access to the registration system online. PIN s are not tied to a user in any way. It is given to them so that they can gain access to register as a user into the SCOT course.
More informationAerial Lift and Scaffolding Guidelines
Aerial Lift and Scaffolding Guidelines November 2018 Aerial Lift and Scaffolding Guidelines TABLE of CONTENTS I. General II. III. IV. Roles and Responsibilities Types of Aerial Lifts Operating Requirements
More informationINTRODUCTION TO LOGGING, SAWMILL, AND WOOD SPLITTER SAFETY
Developed by: INTRODUCTION TO LOGGING, SAWMILL, AND WOOD SPLITTER SAFETY Andrew Egan New Mexico Forest and Watershed Restoration Institute LOGGING SAFETY Background and the OSHA Logging Standard LOGGING
More informationProcedure: Fixed plant and equipment - machine guarding
Procedure: Fixed plant and equipment - machine guarding Purpose The purpose of this procedure is to define the requirements for machine guarding used to control the risk of injury arising from the use
More informationCritical Risk 5 Health and Safety Toolbox trenches and excavations
Lessons learned from one of New Zealand s most challenging civil engineering projects: rebuilding the earthquake damaged pipes, roads, bridges and retaining walls in the city of Christchurch 2011-2016.
More information1417-LDG-E CLOSE CALLS AND NEAR MISSES
1417-LDG-E CLOSE CALLS AND NEAR MISSES Leader s Guide 2000, ERI PRODUCTIONS INC. CLOSE CALLS AND NEAR MISSES This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More information1 IMHOFF CUSTOM SERVICES INC. AERIAL LIFT POLICY
1 IMHOFF CUSTOM SERVICES INC. AERIAL LIFT POLICY Purpose and Applicability The purpose of this Program is to ensure that Imhoff Custom Services Inc. employees who operate aerial or scissor lifts have the
More informationto? A. 1 day B. 2 days C. 3 days D. no days
01 What should you do if you see co-workers working on the 20th floor of a building without any guardrails on its open side? A. Ignore it and carry on working. B. Help them to finish the work faster. C.
More informationPersonal Safety Involvement. PSI Training Agenda What is it? Risk and Behaviors How it works Role Play Questions
Personal Safety Involvement PSI Training Agenda What is it? Risk and Behaviors How it works Role Play Questions Personal Safety Involvement PSI What is it? PSI is a tool for encouraging and supporting
More informationHealth & Safety at Work
Ministry of Labour Worker Health & Safety at Work Prevention Starts Here Worker Health and Safety Awareness in 4 Steps This workbook belongs to: Table of Contents Introduction 4 Step 1: Get on Board 5
More informationSafety and Ergonomics Study for High Rise Construction Project
Safety and Ergonomics Study for High Rise Construction Project Er.Saurabh J.Gawali 1 Prof.P.M.Attarde 2 1Student of Masters of Civil Engineering at SSGBCOE&T, Bhusawal, India 2Associate Professor, Department
More informationBefore you begin. Introduction Receiving goods 1. Topic 1 What you need to know to receive goods 3
Contents Before you begin v Introduction Receiving goods 1 Topic 1 What you need to know to receive goods 3 1A Workplace procedures for receiving goods 4 Activity 1 13 1B Documentation requirements for
More informationAR SCAFFOLDING AR ALUMINUM MOBILE AR STEEL MOBILE
SAFETY RULES and INSTRUCTIONS FOR AR SCAFFOLDING AR ALUMINUM MOBILE AR STEEL MOBILE INTERIOR or EXTERIOR USE ! WARNING! Improper assembly, dismantling or use of Multi-Use Scaffold may result in serious
More informationA. you must wear safety goggles B. you must wear hand gloves C. you must wear safety shoes D. you must wear safety helmet
01 This mandatory safety sign means. A. you must wear safety goggles B. you must wear hand gloves C. you must wear safety shoes D. you must wear safety helmet 02 If your employer asks you to work for another
More informationConstruction OS&H Vertical movement
Construction OS&H Vertical movement Summary Common hazards with vertical movement Cranes Hoists Vertical distribution of concrete Falls of materials What are the common hazards with vertical movement?
More informationAN INTRODUCTION TO WORKPLACE SAFETY. This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
AN INTRODUCTION TO WORKPLACE SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the
More informationHe saw his shadow% OSHA CLASSES. 30-hr OSHA. General Industry. February 20 (all day) February 27 (8 am - 12 pm)
Volume I, Issue 9 February 2014 OSHA CLASSES 10-hr OSHA General Industry February 20 (all day) February 27 (8 am - 12 pm) Course Fee: $199 Register Deadline: Feb 6 30-hr OSHA General Industry Thursdays,
More informationSafety & Environmental Orientation Program for Contractors
Transmission Group Safety & Environmental Orientation Program for Contractors Applies To Eversource Connecticut, Western Massachusetts, and New Hampshire 1 Agenda Introduction ES Contractor Work Rules
More informationExcavation and Trenching 2018 Stand Down. Jim Shelton, CAS Houston North Area Office
Excavation and Trenching 2018 Stand Down Jim Shelton, CAS Houston North Area Office Why a Trenching Safety Stand Down? Workers Die and Get Injured Not All Publicity is Good Publicity BLS Fatalities by
More informationTrench Safety & Qualified Person Presented by: Mike Ross National Training Director
Trench Safety & Qualified Person Presented by: Mike Ross National Training Director Excavation Hazards Excavation has always been dangerous work. Workers in the underground industry have a 112% better
More informationTRENCHING AND EXCAVATION
TRENCHING AND EXCAVATION The following guide is an aid intended for students who have completed the ClickSafety training course or module associated with Trenching and Excavation. This guide is a resource
More informationSafety Week Idea Book
Safety Week 2016 Idea Book Training Emergency Action Plan Drillin- Plan an emergency drill during Safety Week to make sure employees are ready in case of an emergency. After the drill take a head count
More informationDOUBLE SLIDE RAIL INSTALLATION METHOD. Double Slide Rail August
Double Slide Rail August 2015 1 DOUBLE SLIDE RAIL INSTALLATION METHOD Introduction Slide rail shoring systems can be used for trenches up to 12m wide and 6m deep. Module length is determined by panels
More informationSafe Work Method Statement. 14/4/16 Approved by (Snr Management Rep):
ABN 39 137 318 873 Unit 2, 36 Lidco St Arndell Park NSW 2148 QAC swms2 Phone: 1300 121 544 Fax 1300 078 877 Safe Work Method Statement SWMS No: 1 Revision Date: 14/4/16 Approved by (Snr Management Rep):
More information