CONFORMITY AND APPROVAL
|
|
|
- Shanon Cunningham
- 6 years ago
- Views:
Transcription
1 Polyester Enclosure Polyester Enclosure CONFORMITY AND APPROVAL Heal-moulded polyester enclosures, in grey colour RAL Self-extinguishable materials, as per ASTM D6. Extreme utilization temperatures: - and +1. Non higroscopic materials, mimimum water absortion. High mechanical resistance against impact. Resistance against rusting and corrosion by chemical or atmospherical agemts. Easy to machine. Easy to move around and install because of its lightness. Door hinges allows more than 1 opening.excellent presentation and nice superficial finishing. D Model Dimension Dimension Inner door grey door clear door H W D A B H TIP-3 TIP-43 TX-3 TX \ TP-43 \ 366 \ 8 TIP-44 TX-44 0 TP TIP-54 TX TP TIP-64 TX TP W TIP-65 TIP-86 TX-65 TX TP-65 TP
2 Polyester Enclosure Transparent Door New range of enclosures made reinforced polyester with % glass fibre which gets high resistance against impacts (9), together with its lightness in comparison with steel enclosures. They are particular suitable for mounting electrical or electronic equipent in those "aggressive" environments where polyester, as a future material, a result of this, long life time. Polyester plate Polyester plate Dimension M Z N M N Z PP PP PP PP PP PP PP Base plate for fastening the unit. Mounting plate Dimension C E TI TI c bending part TI-44 TI TI E TI TI Mounting plate bending part If the C greater than 0, the floor will be bent, the table below for after bending size. 36
3 Accessories of Polycarbonate box FOR ALL TIP BOX DRILLS FOR WALL MOUNTING 37
4 Switch box Plus the high quality of security is to ensure the success of TIBOX in market. Polycarbonate glass fiber with a few good insulation properties, resistance to chemical corrosion and anti-mechanical propeties of extruded, According En60529 standard, the protect degree is IP66. Dust-proof, waterproof and resistant to high temperature of 85 degrees. Pleasing in appearance and performance in solid quality. Are widely used in electronics, communications, fire prevention facililties, control panels, terminal boxes, PCB containers, ships, household equipment, cement, food, chemical medicine, agriculture and other fields. TIBOX have a very good oil resistance flame resistance and high strength suitable for a variety of harsh environments 38
5 Plastic Enclosure-Switch Box SCREW TYPE R The enclosure is according to EN60529 standard, free from corrosion, compressive property and inslation,widely used in electronics, communications, fire fightingapparatus, control panels, terminal boxes, public accommodation, ship industry,food industry etc. We always give top priority to quality and safety,your satisfaction is guaranteed. Temperature range:- to + ABS:Butadiene Styrene PC:Poly Carbonate. Tolerance: 1mm 39
6 Plastic Enclosure - Switch Box R Stainless steel latch +Screw type Screw type Stainless steel latch+screw type Dimension Grey Cover Clear Cover Grey Cover Clear Cover W H D D1 D2 TJ-AG-06 TJ-AG-0609 TJ-AG-0811-S TJ-AG S TJ-AG-0811 TJ-AG-0813 TJ-AG-0816-S TJ-AG-0816 TJ-AG-0818 TJ-AG-08 TJ-AG TJ-AG TJ-AG TJ-AG-08-1 TJ-AG-1212-S TJ-AG-1212 TJ-AG-1217 TJ-AG TJ-AG-1417 TJ-AG-15 TJ-AG-15-1 TJ-AG-15 TJ-AG-15-1 TJ-AG- TJ-AG--S TJ-AG TJ-AG-17 TJ-AG-17-1 TJ-AG-0712 TJ-AG TJ-AG-1423 TJ-AG-1717 TJ-AT-06 TJ-AT-0609 TJ-AT-0811-S TJ-AT S TJ-AT-0811 TJ-AT-0813 TJ-AT-0816-S TJ-AT-0816 TJ-AT-0818 TJ-AT-08 TJ-AT TJ-AT TJ-AT TJ-AT-08-1 TJ-AT-1212-S TJ-AT-1212 TJ-AT-1217 TJ-AT TJ-AT-1417 TJ-AT-15 TJ-AT-15-1 TJ-AT-15 TJ-AT-15-1 TJ-AT- TJ-AT--S TJ-AT TJ-AT-17 TJ-AT-17-1 TJ-AT-0712 TJ-AT TJ-AT-1423 TJ-AT-1717 TJ-AGH-06 TJ-AGH-0609 TJ-AGH-0811-S TJ-AGH S TJ-AGH-0811 TJ-AGH-0813 TJ-AGH-0816-S TJ-AGH-0816 TJ-AGH-0818 TJ-AGH-08 TJ-AGH TJ-AGH TJ-AGH TJ-AGH-08-1 TJ-AGH-1212-S TJ-AGH-1212 TJ-AGH-1217 TJ-AGH TJ-AGH-1417 TJ-AGH-15 TJ-AGH-15-1 TJ-AGH-15 TJ-AGH-15-1 TJ-AGH- TJ-AGH--S TJ-AGH TJ-AGH-17 TJ-AGH-17-1 TJ-AGH-0712 TJ-AGH TJ-AGH-1423 TJ-AGH-1717 TJ-ATH-06 TJ-ATH-0609 TJ-ATH-0811-S TJ-ATH S TJ-ATH-0811 TJ-ATH-0813 TJ-ATH-0816-S TJ-ATH-0816 TJ-ATH-0818 TJ-ATH-08 TJ-ATH TJ-ATH TJ-ATH TJ-ATH-08-1 TJ-ATH-1212-S TJ-ATH-1212 TJ-ATH-1217 TJ-ATH TJ-ATH-1417 TJ-ATH-15 TJ-ATH-15-1 TJ-ATH-15 TJ-ATH-15-1 TJ-ATH- TJ-ATH--S TJ-ATH TJ-ATH-17 TJ-ATH-17-1 TJ-ATH-0712 TJ-ATH TJ-ATH-1423 TJ-ATH
7 Plastic Enclosure metal mounting plate plastic mounting plate front back mounting plate mounting plate Dimension mounting plate Dimension mounting plate Dimension Metal Plastic H W TJ-0811 TJ-0813 TJ-0816 TJ-0818 TJ-08 TJ-1212 TJ-1217 TJ-0811P TJ-0813P TJ-0816P TJ-0818P TJ-08P TJ-1212P TJ-1217P Metal TJ-1417 TJ-15 TJ-15 TJ- TJ-1717 TJ-17 TJ-0712 Plastic TJ-1417P TJ-15P TJ-15P TJ-P TJ-1717P TJ-17P TJ-0712P H W Metal TJ-1423 TJ-2819 TJ-2828 TJ-3428 TJ-3828 Plastic TJ-1423P TJ-2819P TJ-2828P TJ-3428P TJ-3828P H W Installing assembly diagram Installing assembly diagram 41
8 R Plastic Enclosure -Big Box Plastic Enclosure-Big box Beautiful appearance excellent processiong and stability shoule be guaranteed by material such as High Intensity ABS, PC, AC Polyester assured Flammibility material amd Glass % annexing material. The use is convenient for the installation of Terminal Box, the supply Switchboard, Apparatus Box, electrical power supply and Control Box etc. Screw type Stainless steel latch+screw type Dimension Grey Cover Clear Cover Grey Cover Clear Cover W H D D1 D2 TJ-AG-2819 TJ-AG TJ-AG-2828 TJ-AG-3428 TJ-AG TJ-AG-3828 TJ-AG TJ-AG TJ-AT-2819 TJ-AT TJ-AT-2828 TJ-AT-3428 TJ-AT TJ-AT-3828 TJ-AT TJ-AT TJ-AGH-2819 TJ-AGH TJ-AGH-2828 TJ-AGH-3428 TJ-AGH TJ-AGH-3828 TJ-AGH TJ-AGH TJ-ATH-2819 TJ-ATH TJ-ATH-2828 TJ-ATH-3428 TJ-ATH TJ-ATH-3828 TJ-ATH TJ-ATH Tolerance: 1mm 42
9 R Plastic Enclosure Metal mounting plate Cover screw Cover Grey Cover Transparent Cover Metal Mounting plate W H D D1 D2 A B TB-AG-1010 TB-AG-0812 TB-AG-1115 TB-AG-1419 TB-AG-1924 TB-AG-22 TB-AG-38 TB-AT-1010 TB-AT-0812 TB-AT-1115 TB-AT-1419 TB-AT-1924 TB-AT-22 TB-AT-38 TJ-1010 TJ-0812 TJ-1115 TJ-1419 TJ-1924 TJ-22 TJ
10 Plastic Enclosure-Plastic latch+ type R Out of the plastio boxes which are selling at present, It's a blilty are most escwlient, the competitivepover is much higher with the low price same as the levsl of steel Box. The products were added the electromagnotlo intorgerence(emi) and preventiong substance of the static electriclty, and the stong point was glven to the relevat mechanical proteciton of electriclty, and the stong point was glven to the relevat mechanical protection of electrlcity,electron and etc. The uses are possible according to the size such as small Terminal Box, Signal, Terminal and Pull, Control Box etc. Plastic Enclosure-Plastic latch+hinge type Plastic latch hinge type Mounting plate Dimension Grey Cover TE-AG-1015 TE-AG-10 TE-AG-1515 TE-AG-1722 TE-AG-1929 TE-AG-2939 Clear Cover TE-AT-1015 TE-AT-10 TE-AT-1515 TE-AT-1722 TE-AT-1929 TE-AT-2939 Plastic Metal W H D D1 D2 A B TJ-1015P TJ-10P TJ-1515P TJ-1722P TJ-1929P TJ-2939P TJ-1015 TJ-10 TJ-1515 TJ-1722 TJ-1929 TJ
11 R R Plastic Enclosure-Plastic latch+ type Plastic latch hinge type Mounting plate Dimension Grey Door TJ-MG--S TJ-MG- TJ-MG- TJ-MG- Clear Door TJ-MT--S TJ-MT- TJ-MT- TJ-MT- Plastic W H D D1 D2 A B TJ-P TJ-P / / Metal TJ- TJ- TJ- TJ TJ-KT TIBOX have a very good oil resistance flame resistance and high strength. Suitable for a variety of harsh environments. locks+hinge type Grey Door Clear Door TJ-KG- TJ-KT- TJ-KG- TJ-KT- TJ-KG- TJ-KT- Dimension W H D D1 D TJ-KG 45
12 Accessories of Plastic Enclosure 46
Glass Reinforced Polyester Enclosures BPG. Glass Reinforced Polyester Enclosures
BPG 42 The BPG range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
Product Datasheet. Fire Hose Reel (Page 3)
Product Datasheet Fire (Page 2) Fire Hose Reel (Page 3) Flush Type Hose Reel Cabinet (Page 4) GRP Fire cabinets are used for indoor and outdoor application with weatherproof and antistatic properties,
Series PV. Compact Switchgear Cabinets. Construction subject to change without notice Dimensions in mm
Series PV Single layer design, thermal conductivity k = 5 W/m 2 K For wall mounting by hanging and standing installation Torsion resistant, self-supporting casing without joints, corrosion and seawater
Protect people and preserve equipment. Universal Enclosures
Protect people and preserve equipment 2 Easy to mount, Easy easy to work, easy Easy to choose 03 Quality and safety go hand in hand High profile enclosures for your most demanding job For more than 50
Insulated enclosure, +knockouts, RAL7032, HxWxD=500x375x225mm
DATASHEET - CI45E-200-RAL7032 Delivery program Insulated enclosure, +knockouts, RAL7032, HxWxD=500x375x225mm Part no. CI45E-200-RAL7032 Catalog No. 090160 EL-Nummer (Norway) 2502339 Dimensions mm Product
Stainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
Ensto Industrial Solutions. Enclosing solutions. for the solar energy industry
Ensto Industrial Solutions Enclosing solutions for the solar energy industry Ensto Industrial Solutions for demanding environments We are known in the industry for designing and manufacturing standard
Mounted Enclosures Steel Powder-Coated
Mounted Enclosures Steel Powder-Coated S1 SINGLE DOOR IP66 The IP Enclosures S1 range of electrical enclosures are powdercoated galvanised steel single door enclosures designed to house a variety of electrical
42-SDMS-03 SPECIFICATIONS FOR
SPECIFICATIONS FOR INSIDE ROOM FIBER GLASS REINFORCED POLYESTER METER BOXES This specification is property of SEC and subject to change or modification without any notice CONTENTS Clauses: Page No. 1 SCOPE
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY METRIC SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES OFFSET TYPE
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY 08625 METRIC SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES OFFSET TYPE N.J. Specification No. Effective Date: July 1, 2001 New
PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET
PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET The SLIM-GLASS SOLUTIONS partition with monolithic panel is a system to divide indoor spaces with a lower of 40 mm of width and 25
Guide for selecting the right FIBOX enclosure
Guide for selecting the right FIBOX enclosure E n c l o s u r e f a m i l y MNX CAB ALU SOLID Material PC ABS PC ABS AL PC ABS Size min (mm) 100x100x35 150x150x110 50x45x32 188x188x130 Size max (mm) 360x255x150
Pipeline Accessories. PSI Wall Sleeves. General Information Selection Guide Technical Data Installation Instruction
Pipeline Accessories PSI Wall Sleeves General Information Selection Guide Technical Data Installation Instruction 1 PSI Wall Sleeves made of steel General Information An economic method to seal hydrostatically
SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS
PRODUCT SPECIFICATION SERIES 1080/1180 PART 1 - GENERAL 1.01 Work Included SECTION 10170 SOLID PHENOLIC PLASTIC TOILET PARTITIONS A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
Specification Floor-To-Ceiling Solid Plastic Toilet Compartments
Specification Floor-To-Ceiling Solid Plastic Toilet Compartments PART 1 GENERAL 1.01 SUBMITTALS A. Plastic compartment work includes the following, where indicated: 1. Floor-to-ceiling compartments. B.
M I N I C O L D R O O M TECHNICAL SPECIFICATIONS
M I N I C O L D R O O M TECHNICAL SPECIFICATIONS Page.1 INTRODUCTION The Isark range, within the ColdKit range of cold rooms, was developed to combine: Aesthetics and quality Ease of transport and assembly
LINEA PLANA PRODUCT SHEET. This product sheet complies with the provisions of Italian Law Decree no. 206/2005 the "Consumer Code"
LINEA PLANA PRODUCT SHEET This product sheet complies with the provisions of Italian Law Decree no. 206/2005 the "Consumer Code" Pagina 1 KITCHEN LINEA GROOVE SYSTEMS: "PIATTA" aluminium spacer in a stainless,
SECTION ALL GLASS ENTRANCES. 1. Lock cylinders for tempered glass entrance doors are specified in Division 8 section Finished Hardware.
1 SECTION 08 4210 ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1. Lock cylinders
Series ESK / ESB. Cabinets in Modular Design. Manufacturing Program: ESK-20 ESK-40 ESK-80 ESB Sandwich construction 20 mm, 40 mm and 80 mm
Series ESK / ESB Sandwich construction 20 mm, 40 mm and 80 mm Thermal conductivity k: 1,2 W/m 2 K at ESK-20 : 0,75 W/m²K at ESK-40 : 0,35 W/m²K at ESK-80 Self-supporting, frameless construction built with
SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.
SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing
SECTION SOLID PLASTIC TOILET PARTITIONS. A. Section Includes: Toilet partitions and urinal screens, complete with hardware.
SECTION 10170 SOLID PLASTIC TOILET PARTITIONS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Toilet partitions and urinal screens, complete with hardware. 1.02 REFERENCES A. American Society for Testing
Section 5 Panels & Accessories
Contents Section 5 Panels 74-76 Stiffener/Handle 79 Wire Mesh 75 Sliding Door Guide 80 Panel Mounting locks 77 Rolling Door Guide 81 Mesh Retainers 78 ifold Door Glide 82-83 Mesh Clamp 79 T-Clips 84 Panels
50 N E T b o x Wall Mounting C A B I N E T s
50 www.lande.com.tr N E T b o x Wall Mounting C A B I N E T s W=600mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an optimum
SPECIFICATION FOR SIMPLEX SWITCHBOARDS
SPECIFICATION FOR SIMPLEX SWITCHBOARDS 1.0 SCOPE This specification presents general guidelines, design criteria, and construction requirements for AZZ ENCLOSURE SYSTEMS SIMPLEX PANELS for providing control
SECTION TOILET COMPARTMENTS SPEC WRITER NOTES:
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 21 13 TOILET COMPARTMENTS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in
Frame Specifications
Madero High Definition Steel Slabs Premium Wood Frame Door Madero Door 24 ga. primed high-definition steel - bright white; primed wood stiles and top rail; composite bottom rail Fiberglass Slabs Premium
RN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
ENERGY-DISTRIBUTION. TwinLine N 44 The new system of floor-standing cabinets in IP44
ENERGY-DISTRIBUTION TwinLine N 44 The new system of floor-standing cabinets in IP44 2 FLOOR-STANDING CABINETS TWINLINE N 44 2CPC 000 351 B0201 PRODUCT BENEFITS The new system of floor-standing cabinets
SECTION MOTOR CONTROL CENTER
SECTION 16445 MOTOR CONTROL CENTER PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Motor Control Center (MCC). The contract item includes demolition and removal of existing MCC;
PLASTIC LAMINATED COMPARTMENTS SECTION TOILET PARTITIONS
PHONE (734) 467-8711 Phone: 714.666.0108 / 714.666.0109 FAX (734) 467-8710 www.weisrobart.com Fax: 714.666.0110 3501 E. La Palma Ave., Anaheim, CA 92806 3737 S. VENOY RD. P.O. BOX 130 www.weisrobart.com
Curtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
LED Power factor: 0.9 Colour rendering index: 80 Luminous flux maintenance 80%: 50000h (L80B20) Colour temperature: on request 3000K and 6000K
WATERPROOF FIXTURES Polycarbonate fixtures of the Echo series are IP66 water-resistant if installed at temperatures not exceeding 45 C. Direct exposure to sunlight can easily cause the temperature to exceed
AD 0 O~ Partitions, Inc East La Palma Avenue - Anaheim, California Ph: and Fax:
AD 0 O~ Partitions, Inc. 3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax:714-666-0110 www.weisrobart.com HOPE SOLID POLYMER-PLASTIC COMPARTMENTS PART 1 - GENERAL
SECTION TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 21 13 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
Basic Door System* with Mini Blind and Schlage Plymouth Handleset in Bright Chrome 6 MADERO ENTRY SERIES
MADERO Basic Door System* with Mini Blind and Schlage Plymouth leset in Bright Chrome DOOR SYSTEMS High Definition Steel Slab Wood Frame DOOR DESIGNS AVAILABLE Refer to page 1 for glass details The Basic
.1 Thermal insulation for insulated piping and piping accessories affected by construction and new pipe sections as indicated on drawings.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 8 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes: 1.2 REFERENCES.1 Thermal insulation for insulated piping and piping accessories affected by construction and new
Protective devices according to EN ISO 12100
devices according to EN ISO 12100 PLUS PROTECT-PANEL page 590 589 PLUS PROTECT-PANEL system High speeds, quick machining cycles, cooling water and chips: Machine tools represent a dangerous environment
Free-Stand Single and Dual Access with 3-Point Latches, Type 4X
Spec-00037 Floor-Mount and Free-Stand Enclosures Floor-Mount and Free-Stand Enclosures Free-Stand Single and Dual Access with 3-Point Latches, Type 4X variety of other electrical and electronic equipment.
Polycrete Big Block Standard Specification
Polycrete Big Block Standard Specification SECTION 03 11 19 INSULATED CONCRETE FORMING 10/13 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent
BATI TEL ORGU. Product Catalog:Fence Systems. Fence Panel Wire Netting Automatic Door Systems
BATI TEL ORGU Fence Panel Wire Netting Automatic Door Systems Product Catalog:Fence Systems www.batitelorgu.com BATI TEL ORGU Fence Panel Wire netting Automatic Door systems Content Fence panel Concrete
NETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
PRODUCT SPECIFICATIONS - SERIES 1090
PRODUCT SPECIFICATIONS - SERIES 1090 SECTION 10170 SOLID COLOR REINFORCED COMPOSITE TOILET PARTITIONS PART 1 GENERAL 1.01 Work Included A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing
CONCRETE WEIGHBRIDGE. SBP/CO model
CONCRETE WEIGHBRIDGE SBP/CO model SBP/CO model The SBP/CO weighbridge is an ideal solution for weighing motor vehicles and work trucks up to a maximum of 80 tons. The design allows for easy of transport,
Blast Resistant Enhanced Curtain Wall. Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION PERFORMANCE
Blast Resistant Enhanced Curtain Wall Blast Resistant Enhanced Curtain Wall Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
HDPE SOLID POLYMER-PLASTIC FLOOR TO CEILING COMPARTMENTS SECTION FC WEIS/POLY TOILET PARTITIONS
3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com HDPE SOLID POLYMER-PLASTIC FLOOR TO CEILING COMPARTMENTS PART 1 GENERAL SECTION
PLASTIC LAMINATED FLOOR TO CEILING COMPARTMENTS SECTION FC TOILET PARTITIONS
Phone: 714.666.0108 PHONE /(734) 714.666.0109 467-8711 FAX Fax: (734) 714.666.0110 467-8710 www.weisrobart.com 3501 E. La Palma Ave., Anaheim, CA 92806 3737 S. VENOY RD. P.O. BOX 130 www.weisrobart.com
Ramps Vip Aldime WHAT DO VIP ALDIME RAMPS HAVE THAT OTHERS DO NOT?
Ramps Vip Aldime Vip Vip Aldime, established in 2005, is presently a business project within the field of aluminum. Its professional team proudly bears more than 20 years of experience in this sector.
ARGENTA PLUS (FSC) IP55-IP65 steel floorstanding. cabinets. SEMI-COMPACT (FSC) Technical Specifications
ARGENTA PLUS (FSC) 55-65 steel floorstanding semi-compact cabinets The Floor-Standing Cabinets of the ARGENTA PLUS series are a set of industrial steel enclosures designed to contain any type of electrical
NETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
Onduline covers the world. More than 100 countries across the globe
Onduline covers the world Onduline was founded in 1950 to manufacture and market the now famous corrugated roofing sheets. The outstanding growth and success of Onduline in the last 60 years has seen the
Mars. Pendant & Surface
Mars Pendant & Surface IK 10 85 45 C 119540 119550 1195 40W 50W W 3300lm 4125lm 5363lm 1123 x 94 1123 x 94 1423 x 94 * Accessories to be ordered separately. Weather proof metallic body linear ED fixture.
Modular Floor Standing Enclosures Steel Powder-Coated MF1S SINGLE DOOR IP55
Modular Floor Standing Enclosures Steel Powder-Coated MF1S SINGLE DOOR IP55 IP Enclosures MF1S Range of powder-coated galvanised steel Modular Free Standing Enclosures for low voltage switchgear and controlgear
Dagard-Taïga/UK 28/02/02 11:50 Page 1 aïga Cold Room T
Taïga Cold Room Taiga is designed for the storage of perishables, in the retail, catering and supermarket sectors The various environmental and operating requirements (ceiling height, type of premises,
42-SDMS-02 SPECIFICATIONS FOR FIBERGLASS REINFORCED LOW VOLTAGE SERVICE CABINET FOR 800A BULK CUSTOMERS
SPECIFICATIONS FOR FIBERGLASS REINFORCED LOW VOLTAGE SERVICE CABINET FOR 800A BULK CUSTOMERS This specification is property of SEC and subject to change or modification without any notice C O N T E N T
E-Xtreme. Titanium plasma protected. E-Xtreme hours in salt spray tests. series. iwww.ilme.com
iwww.ilme.com E-Xtreme Titanium plasma protected corrosion-proof stone-chip series E-Xtreme 3.000 hours in salt spray tests AVAILABLE 2017 E-Xtreme series CORROSION-PROOF METAL ENCLOSURES 3.000 HOURS IN
GRP FENCING - MESH BARBICAN FINISHES APPLICATIONS. 4Grey RAL 7001 as standard 4Other colours available on request
WELDED MESH PANELS Operating within the fencing industry since 1947, Jacksons have forged a reputation for delivering proven perimeter security applications. Today, as part of our product portfolio the
PROCESS JBs. Easy to install & maintain Standard proven designs reduce project costs Superb corrosion resistance Wide choice of cable gland types
Process Junction Boxes for fieldbus installations Relcom PROCSS JBs asy to install & maintain Standard proven designs reduce project costs Superb corrosion resistance Wide choice of cable gland types All
SECTION ORNAMENTAL ALUMINUM FENCING
SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
ALL-ALUMINUM DOOR & WINDOW FRAMING
ALL-ALUMINUM DOOR & WINDOW FRAMING WITH INTEGRATED ALUMINUM DOOR STOP SECTION 08 41 13 ALUMINUM FRAMED ENTRANCES AND STOREFRONTS SPECIFICATION PART 1 GENERAL 1.1 SECTION INCLUDES: A. Prefinished aluminum
Power IT Compact Secondary Substations, CSS. Technical catalogue for sheet steel substations
Power IT Compact Secondary Substations, CSS Technical catalogue for sheet steel substations The New Standard for Individual Solutions The new CSS substations represent a unique concept, which is introducing
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES, CUTOFF TYPE
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY 08625 SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES, CUTOFF TYPE N.J. Specification No. Effective Date: July 1, 2001 New Jersey
MICRO-PS CLEANROOMS PARTITION SYSTEM
MICRO-PS CLEANROOMS PARTITION SYSTEM KEY POINTS Stiffness and lightweight Self-supporting The MICRO-PS system is the most evolved solution for creating high-tech partitions in Clean Rooms; the system has
B. LEED Submittals (Projects authorized for LEED certification only)
SECTION 10 21 16 - SHOWER AND DRESSING COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE C20 C21 C26-2 C26-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
CANTILEVER IPE
IPE 90-120 RAL 3000 Columns RAL 1004 Shelves Galvanized crosses and accessories Freestanding shelving particularly suitable for the storage of long materials such as pipes, bars, sections, sheets in packs,
INDUSTRIAL FRAMING SOLUTIONS FOR MANUFACTURERS PRODUCTS & SERVICES
INDUSTRIAL FRAMING SOLUTIONS FOR MANUFACTURERS PRODUCTS & SERVICES F&L Industrial Solutions designs and builds all types of custom products that help businesses and organizations improve their efficiency,
Section BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
SPECIAL SPECIFICATION 8810 Communication Hub Enclosure
2004 Specifications CSJ 0914-00-301 & 0914-00-314 SPECIAL SPECIFICATION 8810 Communication Hub Enclosure 1. Description. Provide Communication Hub Enclosures of various types and sizes, as shown on the
NORTHWESTERN UNIVERSITY PROJECT NAME JOB #
SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Section A2 Table of Contents ALL GLASS ENTRANCES
Architectural Aluminum Entrances Storefronts Curtain Walls Impact-Resistant Systems Section A Table of Contents ALL GLASS ENTRANCES Specifications...S-S Swing Type A... - Swing Type F... - Swing Type P...
SECURITY WITH SOPHISTICATED STYLE
SECURITY WITH SOPHISTICATED STYLE The attractive Roll-Vision model protects against theft and keeps out debris while allowing full view of what s inside. Unlike competitors grilles, our unique design uses
Underground Dry Utilities Civil Engineering 2014 Edition
Underground Dry Utilities Civil Engineering 2014 Edition CAHORS, the underground dry utilities specialist CAHORS offers a wide range of underground cable draw-in boxes in SMC composite materials specifically
ORTO. Sound-attenuating transfer unit QUICK FACTS
Sound-attenuating transfer unit QUICK FACTS Supplied in pairs For the transfer of air through a wall Fits in a rectangular wall opening Simple to install Designed for installation above a door Accessories:
mcr LAM louvered vents
mcr LAM louvered vents KLAPY LOUVERED ŻALUZJOWE VENTS Smoke and hot gases generated during fire pose a serious hazard to the life of people in burning rooms, to the property stored in the building and
HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION FB WEIS/POLY TOILET PARTITIONS
3501 East La Palma Avenue - Anaheim, California 92806 Ph: 714-666-0108 and 714-666-0109 Fax: 714-666-0110 www.weisrobart.com PART 1 GENERAL HDPE SOLID POLYMER-PLASTIC FLOOR BRACED COMPARTMENTS SECTION
Safety Gate System Specification
Safety Gate System Specification Identification of the Product & Company Product: Company Details: Safety Gate - Injection moulded safe access product Evergrip Limited Flaxley Road Selby YO8 4BG United
MICRO-PS CLEANROOMS PARTITION SYSTEM
MICRO-PS CLEANROOMS PARTITION SYSTEM KEY POINTS Stiffness and lightweight Self-supporting The MICRO-PS system is the most evolved solution for creating high-tech partitions in Clean Rooms; the system has
CANAL COMPACT & CANAL PLUS. powerful warmth, perfectly integrated
CANAL COMPACT & CANAL PLUS powerful warmth, perfectly integrated Fan assisted technology can be added to these products to provide controllable, very high outputs without cost to the environment High output
MACHINERY GUARDING SECTION
SECTION MACHINERY GUARDING De-fence is designed to comply with AS4024.1 when used as machinery guarding. Alternatively, its flexible design lends itself to many applications, including forklift separation.
Mail delivery solutions for the 21st century
Uniclass L861 EPIC Q621 CI/SfB (71) X Mail delivery solutions for the 21st century DAD UK Ltd Mail delivery solutions for the 21st century DAD mailboxes are designed with the end user in mind, ensuring
DICTATOR Lift Shaft System
DICTATOR Lift Shaft System The Modular Lift Shaft System, also for Retrofitting Certified According to EN 1090 A lift is becoming more and more important for daily life, not only in newly constructed buildings
Niagara / DLG-85 Shower Cabin Installation and User s guide
Niagara / DLG-85 Shower Cabin Installation and User s guide I. Mounting Preparation 1. After opening the case, read this introduction carefully, check all the packed parts, examine the shower cabinet for
INTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR PROTECTIVE PANELS FOR dc CRANES (Second Revision) Corresponding IS does not exist IPSS:1-10-013-11 Formerly : IPSS: 1-10-013-03 0. FOREWORD 0.1
Project comparison: old system. One-to-one fixture replacement without changing the existing electrical system
246 Echo Housing: injection moulded, vandal resistant, UV stabilised RAL 7035 grey polycarbonate, high mechanical resistance thanks to the stiffening ribs inside the structure. Diffuser: injection moulded
An Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application
An Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application Introduction Designed for Indoor and outdoor applications Non-tension tap and splice applications Used
Facade panel PICTURA Product Information Sheet
Facade panel PICTURA Product Information Sheet 1 Product range PICTURA fibre cement facade panels are made from: Portland cement Mineral filler Natural organic fibres (cellulose), synthetic organic fibres
TECHNICAL SPECIFICATION FOR SMC LT AMR METER BOXES MANUFACTURED FROM THERMOSETTING PLASTIC 1.0 SCOPE:
TECHNICAL SPECIFICATION FOR SMC LT AMR METER BOXES MANUFACTURED FROM THERMOSETTING PLASTIC 1.0 SCOPE: 1.1 This specification covers the design, manufacturing & testing of anticorrosive, dust proof, rust
42-SDMS-01 REV. 04 SPECIFICATIONS FOR
42-SDMS-01 REV. 04 SPECIFICATIONS FOR FIBER GLASS REINFORCED POLYESTER METER BOXES This specification is property of SEC and subject to change or modification without any notice CONTENTS Clauses: Page
Panel elements. Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements
Panel elements Closed Panels Transparent Panels Non-Transparent Panels Mesh Panels Accessories for Panel Elements Panel elements Products in this section Acrylic Glass Polycarbonate PET-G Sheet Material
Renault Store - Technical specifications. Promotional media
Renault Store - Technical specifications Promotional media Renault Store / Technical specifications for promotional media / Contents Contents General requirements General technical requirements General
MATERIAL SPECIFICATION FOR SIGNAL HEADS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2461 DECEMBER 1988 MATERIAL SPECIFICATION FOR SIGNAL HEADS 2461.01 SCOPE 2461.02 REFERENCES 2461.03 DEFINITIONS INDEX 2461.04 SUBMISSION AND DESIGN
NATIONAL GRID SEMI-BURIED GAS METER BOX Model KG60046
National Grid Semi-Buried Gas Meter Box NATIONAL GRID SEMI-BURIED The from W T Knowles is an unobtrusive brown meter box designed to be partially buried in the ground. This model was commissioned by National
YOUR AIR HANDLING SOLUTIONS
YOUR AIR HANDLING SOLUTIONS 100% CUSTOM MADE ULTRA CLEAN HIGH PRODUCT LIFE SPAN ENERGY SAVING SODISTRA ZI Nord de Bazouges I 2 rue Gustave Eiffel 53200 Château-Gontier Tel sodistra.com info@sodistra.fr
RECESSED PULL (BACK MOUNT)
272 (BACK MOUNT) (4-27/32") (2-7/16") M4 12 HH-PS99 Designed for back mounting. For panel thickness of 15mm(19/32"). Bore Dimensions (5-5/16") Item No. Weight (g) Carton (pcs) HH-PS99 42 200 Polypropylene
TECHNICAL SPECIFICATIONS
SPEC.NO. MSEDCL/ DIST:MSC-III/SPRING LOADED CONNECTOR BOX/05/10/R0/ 200510 TECHNICAL SPECIFICATIONS FOR TAMPER PROOF SERVICE CONNECTION BOX FOR L.T. LINES / CONSUMER MAINS (20.05.2010) Page 1 of 14 Clause
Non-rigit-PVC. Soft PVC strips
Non-rigit-PVC Soft PVC strips Description: Soft-PVC plates - transparent, smooth, resistant up to - 15 C (standard) and - 35 C (polar), rounded-off / broken longitudinal edges. Width (mm) 200 300 400 Strength
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 10 2113.19 - PLASTIC TOILET COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
TENDER NO. PGVCL/PROC/HT SMC Meter Box/872
TECHNICAL SPECIFICATION FOR HT AMR METER BOXES MADE FROM GLASS REINFORCED POLYSTER SHEET MOULDING COMPOUNDS (SMC). 1.0 SCOPE: 1.1 This specification covers the design, manufacturing and testing of anticorrosive,
LIGHT STRONG CLEAN METRIC
LIGHT STRONG CLEAN METRIC PaNELTIM production process PaNELTIM PIONEER IN SANDWICH PANELS Paneltim panels produced by specialists, for specialists. Paneltim NV is a family-owned company in Lichtervelde