Channel reducing strip

Transcription

1 Filler strips / s PVC filler strips The PVC filler strip can be clipped into the 8 mm longitudinal slot on any extrusion after assembly and is available in grey or black. Grey or black PVC s are used if 3, 4 or 5 mm panels are to be inserted into the extrusion slots. Grey PVC for panels of 3, 4 or 5 mm in thickness Plate insertion depth: 4 mm For thin sheets eg expanded metal, steel sheets, etc. Grey PVC for panels up to 3 mm Plate insertion depth: 4 mm Filler strips Standard length 5000mm Filler strips Standard length 5000mm grey A /5000 A / black A /5000 A / A = 3,5 mm A /5000 A / A = 4,5 mm A /5000 A / A /5000 A / A = 5,5 mm A /5000 A / 160

2 s and filler strips s and filler strips To hold panels which are 6 mm thickness. They can also be inverted to blank off the slots on triple channel extrusions. Grey PVC for panels of 6 mm in thickness Panel insertion depth: 11 mm When fitting 3mm panels for base 40 panels extrusions. Black PVC extrusions 50 A = 14.5 mm A /5000 A / Base 40 C /5000 C / extrusions 40 A = 10 mm C /5000 C / extrusions 30 A = 6.5 mm B /5000 B / extrusions B05 1 A = 12 mm B /5000 B / 161

3 H-strip H-strip Used in combination with the B39 55 channel reducing strip, this H-strip allows lift-on or lift-off panels to be inserted or removed. Bottom: B39 35 Top: B39 55 Grey PVC for panels of 4 or 6 mm in thickness H-strip extrusions B05 1 B /5000 B / 162

4 Supporting extrusion / Wedge extrusion Supporting extrusion Wedge extrusion Spring deflection 3.5 The supporting extrusion has two functions: 1. It gives optimum support (pressure) to thin panels which are inserted into the narrow slots. 2. At the same time it also covers the extrusion connector slots. Grey PVC The wedge extrusion can be pressed into the slot on extrusions with a base of 40 or 50 mm. The force holds the panels tightly in place, however thick they are. Grey PVC Measurement data Extrusion base A B C D Clamping extrusion 30 B /5000 B / Supporting extrusion 40 C /5000 C / Wedge extrusion C /5000 C / 163

5 Plastic extrusions Safety-edge extrusion Semi-circular sealing strip Ribbed rubber extrusion Base 50/40/30/20 Sealing strip for clean room technology and many other applications. Fits all standard extrusions. Black neoprene rubber, oil-resistant. The ribbed rubber extrusion can be used to protect the surface of extrusions, as an anti-slip strip or as a seal. This extrusion can be inserted into the slot of nearly all base 50, 40, 30 and 20 cross-sections. EPDM, black Weight: 70g/m Mainly used as a personal safety-extrusion on automatic sliding doors and every where there is danger of crushing parts. It fits to the -extrusions of the base EPDM caoutchouc black Saftey-edge extrusion Standard length 2000 mm C39 90 Semi-circular sealing strip Standard length of rolls of 25 m A A / Ribbed rubber extrusion Standard length of rolls of 100 m D D / 164

6 Sealing strips U-sealing strip Grid extrusion soft This sealing strip can be inserted into the 8 mm slots on any extrusions and is suitable for panels measuring between 3 and 6 mm in thickness. Black neoprene rubber, oil-resistant. Mainly used for holding steel-wire-mesh. The soft lips insulate the vibration and compensats the different thicknesses. It s qualified for panels with 2 5 mm thickness. The grid extrusion fits into the base 50 and 40. Hard- (soft) PVC, black U-sealing strip, A = 12 mm 40/30 mm base Standard length of rolls à 100 m B B / Grid extrusion C /5000 C / U-sealing strip, A = 18 mm Standard length of rolls à 25 m 50 mm base A A / 165

7 Sealing strips Door sealing strip Clamping sealing strip Base 50/40 Clamping sealing strip Base 30/20 Used to seal doors. Fits in all standard extrusions base as does the semi-circular sealing strip. Black soft PVC, oil-resistant, 57 Shore A This sealing strip is used to stabilise and seal panels. It is fitted after the panels are inserted. Black neoprene rubber, oil-resistant. This sealing strip is used to stabilise and seal panels in the extrusion cross-sections of base 20 and 30. It is fitted after the panels are inserted. TPE black, oil-resistant For panels 5 6 mm thick Measurement data A B C Panels 1 3 mm thick Panels 3 4 mm thick Panels 5 6 mm thick Clamping sealing strip Panels 1 3 mm thick Standard length of rolls à 180 m A A / Panels 3 4 mm thick Standard length of rollsn à 250 m A A / Measurement data Panels 5 6 mm thick Door sealing strip Standard length 20 m A A / Panels 5 6 mm thick Standard length of rolls à 250 m A / A / Clamping sealing strip 30/20 base Standard length of rolls à 100 m B B / 166