LIGHTING EQUIPMENT 2018 ILLINOIS FOR YOUR BUSINESS REBATE APPLICATION

Transcription

1 LIGHTING EQUIPMENT 2018 ILLINOIS FOR YOUR BUSINESS REBATE APPLICATION Instructions: Fill out form completely and sign. Attach itemized invoices and supporting documentation, if applicable. Failure to complete the required sections and provide documentation will result in denial of claim. must be purchased between Jan. 1, 2018, and Dec. 31, must be installed and operating prior to submission of final rebate application. Commercial new construction projects are not eligible for prescriptive lighting rebates through this program. All commercial new construction projects must participate in the Commercial Construction program in order to receive lighting rebates. Industrial new construction projects are eligible. Rebates cannot exceed 50 percent of the installed (materials and reasonable labor). You will receive the lesser of the rebate amount listed or 50 percent of installed. Installed includes contractor labor only and does not include internal labor. Rebate application must be submitted within six months of dealer invoice, or by Dec. 31, 2018, whichever comes first, for the equipment/material purchased. The rebate will be based on the rebate schedule in effect on the date of dealer invoice for the equipment/material purchased. Rebate applications received after Dec. 31, 2018, are not eligible for rebates. Custom equipment: If specific equipment you intend to purchase and install is not listed, it may qualify under Nonresidential Custom Systems. However, custom projects must be preapproved by MidAmerican Energy prior to purchase and installation of equipment or system. Projects must be completed within six months of preapproval. See the Nonresidential Custom Systems application for details. SECTION 1 (REQUIRED) Name on account Installation address Customer Information City State ZIP Phone MidAmerican Energy Company account number (found on bill; first seven digits only) Self-installed q Yes q No SECTION 2 (REQUIRED) Building size [sq. ft. (area)] Year building was constructed Do you: q Own q Rent this building The new equipment is for: q Replacement of existing equipment q installation (new to facility) q construction Is facility where equipment will be installed conditioned? (check one) q Cooled only q Heated only q Not cooled or heated q Both heated and cooled If facility is heated, what fuel type is used? (check one) q Natural gas (furnace) q Electric (resistance heating) q Propane q Natural gas (boiler) q Electric (heat pump) Mailing address (if different than installation address) City State ZIP Contact name Title address* *This address only will be used for communication regarding this rebate application. Your address never will be shared and you can unsubscribe at anytime. Page 1 of 12

2 SECTION 2 CONT. (REQUIRED) installed in what type of facility? (check one) Industrial MEC Use Only Agriculture MEC Use Only q Office small 4 floors OS q Apparel manufacturing q Corn farming AG q Office large > 4 floors OL q Chemical manufacturing q Dairy cattle and milk production DF q Office government small 4 floors OS q Computer/electronic product manufacturing q Hog facility HF q Office government large > 4 floors OL q Electrical equipment, appliance/component manufacturing q Food/beverage/tobacco product manufacturing q Furniture and related product manufacturing q Leather and allied product manufacturing q Machinery manufacturing q Nonmetallic mineral product manufacturing q Oil and gas extraction; mining q Paper manufacturing; printing and related support activities q Personal and laundry services q Petroleum and coal products manufacturing q Plastics and rubber products manufacturing q Primary metal/fabricated metal product manufacturing q Textile mill and textile product mill q Transportation equipment manufacturing q Utility q Warehouse and storage q Warehouse large refrigerated q Wood product manufacturing q Miscellaneous manufacturing q Other industrial O q Soybean farming q All other animal production q All other miscellaneous crop farming Commercial q Apartment, halfway house q Condo q Convenience store/gasoline station q Dealership small <30k square feet q Dealership large >30k square feet q Financial institution small <30k square feet q Financial institution large >30k square feet q Grocery store and supermarket q Healthcare (outpatient) q Healthcare (inpatient, including hospital, nursing home, senior care facility) q Healthcare senior housing - individual apartment q Health club/exercise facility small <30k square feet q Health club/exercise facility large >30k square feet q Library q Lodging hotel q Lodging motel q Mixed use q Other - commercial AG AG AG MEC Use Only MF MF CV RS RL OS OL GR HC HS MF RS RL ED LO LO O O q Office public order and safety small 4 floors q Office public order and safety large > 4 floors q Pharmacy and drug store small <30k square feet q Pharmacy and drug store large >30k square feet q Public assembly events/conventions/casinos small <30k square feet q Public assembly events/conventions/casinos large >30k square feet q Religious worship/church q Restaurant fast food q Restaurant full service q Retail small <30k square feet q Retail large >30k square feet q Retail department store small <30k square feet q Retail department store large >30k square feet q School elementary q School jr. high q School high school q School college, university and professional school q School lodging (school/dorm) q Service small <30k square feet q Service large >30k square feet q Truck stop q Warehouse and storage q Warehouse large refrigerated OS OL RS RL HY HY RE RST RST RS RL RS RL ED ED ED ED MF RS RL CV WH-C WH-C Page 2 of 12

3 SECTION 3 (REQUIRED) Complete all fields for each piece of equipment purchased and installed. LED Screw-in Lamps and LED Retrofit Kit Downlights ENERGY STAR certified screw-in LED lamps and LED retrofit downlights are eligible for instant rebates at the time of purchase from participating distributors. For a list of participating retailers and distributors, visit or call LED Troffer Fixtures and Retrofit Kits (Design Lights Consortium Qualified Product List Required) Rebates are based on a one-for-one replacement of existing linear fluorescent troffer systems. The program accepts LED troffer fixtures and retrofit kits. Linear ambient (or strip and wrap) fixtures are not eligible in this category. With preapproval before purchase or installation, they may qualify through the Nonresidential Custom Systems program. Eligible DLC primary use designations: 1 x 4, 2 x 2 and 2 x 4 luminaires for ambient lighting of interior commercial spaces Retrofit kits for 1 x 4, 2 x 2 and 2 x 4 luminaires for ambient lighting of interior commercial spaces Lamp-style retrofit kits for linear panels (1 x 4, 2 x 2 and 2 x 4 troffers) Linear retrofit kits for 1 x 4, 2 x 2 and 2 x 4 luminaires Integrated retrofit kits for 1 x 4, 2 x 2 and 2 x 4 luminaires LED Troffer Fixture Replace fluorescent T8 and T12 existing fixtures; Troffers must replace like-sized fixtures; for example, a 1 x 4 must replace a 1 x 4. Size/ 2 x 4 3,000-7,500 2 x 2 2,000-5,000 brand/ brand/ model number model number X $30/fixture = X $30/fixture = Total calculation Total calculation labor labor 1 x 4 1,500-6,000 brand/ model number X $30/fixture = Total calculation labor Retrofit Kit for LED Troffer Fixtures Replace fluorescent T8 and T12 existing fixtures. Troffers must replace like-sized fixtures; for example, a 1 x 4 must replace a 1 x 4 2 x 4 3,000-7,500 2 x 2 2,000-5,000 brand/ brand/ model number model number X $15/fixture = X $15/fixture = Total calculation Total calculation labor labor 1 x 4 1,500-6,000 brand/ model number X $15/fixture = Total calculation labor Page 3 of 12

4 LED Hanging/Suspended Linear Fixtures with Indirect Components (DLC QPL Required) Linear ambient (or wrap and strip) fixtures are not eligible in this category. With preapproval before purchase or installation, they may qualify through the Nonresidential Custom Systems program. Eligible DLC primary use designation: Linear ambient luminaires with indirect component Size/ 3,000-30,000 brand/ model number X $30/fixture = Total calculation labor Refrigerated LED Case Lighting 5- and 6-Foot Doors (DLC QPL Required) Rebates are based on replacement of T12 or T8 linear 5- to 6-foot fluorescent refrigerated case door lighting with 5- to 6-foot LED Eligible DLC primary use designations: refrigerated case door strip lighting. Rebates are per door, not per lamp. Linear LED tube lights do not qualify for this rebate. With Horizontal refrigerated case luminaires preapproval before purchase or installation, they may qualify through the Nonresidential Custom Systems program. The Vertical refrigerated case luminaires program adopts the DLC definition: Strip lights in refrigerator cases vertically mounted along refrigerator case door mullions. Category Refrigerated case luminaires only covers complete luminaires with all necessary components. Replacement lamps currently are not eligible under this category. Cooler Case q 5-foot door q 6-foot door Replace fluorescent T12 or T8 systems with LED case lighting brand/ model number X $45/door = Total calculation labor Freezer Case q 5-foot door q 6-foot door Replace fluorescent T12 or T8 systems with LED case lighting brand/ model number X $45/door = Total calculation labor Page 4 of 12

5 LED High- and Low-Bay Fixtures and Retrofit Kits (DLC QPL Required) Rebates are based on a one-for-one replacement of HID equipment. Rebates are available for new LED high- and low-bay Eligible DLC primary use designations: lighting. Linear ambient (or wrap and strip) fixtures are not eligible in this category. With preapproval before purchase or Low-bay luminaires for commercial and industrial buildings installation, they may qualify through the Nonresidential Custom Systems program. High-bay must be installed 15' High-bay luminaires for commercial and industrial buildings or higher. High-bay aisle luminaires Retrofit kits for low-bay luminaires for commercial and industrial buildings This program adopts the DLC definition for high- and low-bay fixtures: Pendant, recessed, or surface-mounted fixtures specific Retrofit kits for high-bay luminaires for commercial and industrial buildings for indoor ceiling spaces. This program adopts the DLC definition for high- and low-bay retrofit kits: Integrated-style kits that replace all reflectors and optical systems of existing luminaires; not screw-in lamps intended as HID replacements. LED Low- or High-Bay Fixtures HID system replacement 10,000 brand/ model number X $135/fixture = Total calculation labor LED High-Bay Fixtures HID system replacement 10,001-15,000 brand/ model number X $135/fixture = Total calculation labor 15,001-20,000 brand/ model number X $150/fixture = Total calculation labor 20,001-30,000 brand/ model number X $200/fixture = Total calculation labor >30,000 brand/ model number X $325/fixture = Total calculation labor (cont. on next page) Page 5 of 12

6 LED High- and Low-Bay Fixtures and Retrofit Kits (DLC QPL Required) Rebates are based on a one-for-one replacement of HID equipment. Rebates are available for new LED high- and low-bay Eligible DLC primary use designations: lighting. Linear ambient (or wrap and strip) fixtures are not eligible in this category. With preapproval before purchase or Low-bay luminaires for commercial and industrial buildings installation, they may qualify through the Nonresidential Custom Systems program. High-bay must be installed High-bay luminaires for commercial and industrial buildings 15' or higher. High-bay aisle luminaires Retrofit kits for low-bay luminaires for commercial and industrial buildings This program adopts the DLC definition for high- and low-bay fixtures: Pendant, recessed, or surface-mounted fixtures specific Retrofit kits for high-bay luminaires for commercial and industrial buildings for indoor ceiling spaces. This program adopts the DLC definition for high- and low-bay retrofit kits: Integrated-style kits that replace all reflectors and optical systems of existing luminaires; not screw-in lamps intended as HID replacements. LED Retrofit Kit for Low- or High-Bay Fixtures HID system replacement 10,000 brand/ model number X $40/fixture = Total calculation labor LED Retrofit Kit for High-Bay Fixtures HID system replacement 10,001-15,000 brand/ model number X $40/fixture = Total calculation labor 15,001-20,000 brand/ model number X $50/fixture = Total calculation labor 20,001-30,000 brand/ model number X $80/fixture = Total calculation labor >30,000 brand/ model number X $120/fixture = Total calculation labor Page 6 of 12

7 LED Linear Replacement Lamps (DLC QPL Required) Rebates are based on one-for-one replacement of fluorescent lamps with LED linear replacement lamps listed on the DLC QPL. Eligible DLC primary use designations: Two 4' LED lamps cannot replace one 8' lamp. Replacement lamps ( Plug and Play ) (UL Type A) Internal driver/line voltage lamp-style retrofit kits (UL Type B) This program adopts the DLC definitions: Two-lamp external driver lamp-style retrofit kits (UL Type C) Replacement lamps (UL Type A). Products in this category employ lamp holders to connect to the fixture being retrofitted and are Three-lamp external driver lamp-style retrofit kits (UL Type C) designed to be plug and play replacements for fluorescent lamps. That is, products in this category can operate off an existing Four-lamp external driver lamp-style retrofit kits (UL Type C) fluorescent ballast and do not require mechanical or electrical changes to the fixture. Note that due to testing considerations, at Dual mode internal driver (UL Type A or B) this time only products that can operate off electronic instant start ballasts are eligible. Replacement lamps designed to operate off existing magnetic ballasts, or other types of electronic ballasts, are not eligible. Dual mode internal driver lamps (UL Type A/B) are allowed in this category if installed as a plug and play operating off existing fluorescent ballast. Internal-driver/line voltage linear lamp-style retrofit kits (UL Type B) and external-driver lamp-style retrofit kits (UL Type C) must utilize existing pin sockets. /specifications LED Linear Lamp Type A, 4' 4' T12, T8 and T5 fluorescent replacement lamps brand/ model number X $5/lamp = Total calculation labor LED Linear Lamp Type B and Dual Mode Type A/B, 4 4' T12, T8 and T5 fluorescent replacement lamps brand/ model number X $5/lamp = Total calculation labor LED Linear Lamp Type C, 4 4 T12, T8 and T5 fluorescent replacement lamps brand/ model number X $5/lamp = Total calculation labor LED Replacement for Pin-Based CFL Lamps (DLC QPL Required) Rebates are based on a one-for-one replacement of CFL pin-based lamps. Replacement LED pin-based lamps must replace Eligible DLC Primary use designation: CFL pin-based lamps. Only lamps that are intended to operate using the existing CFL ballast (UL Type A) are eligible. Replacement lamps (plug and play) (UL Type A) UL Type B pin-based lamps do not qualify for prescriptive rebates. With preapproval before purchase or installation, AND they may qualify through the Nonresidential Custom Systems program. Eligible main category: Four pin-base replacement lamps for CFLs LED Pin-Based Lamp brand/ model number X $5/lamp = Total calculation labor Page 7 of 12

8 LED Exterior Fixtures (DLC QPL Required) Rebates are based on one-for-one replacement of exterior HID fixtures and wall packs Eligible DLC primary use designations: with LED fixtures rated for exterior use. Outdoor full cut-off wall-mounted area luminaires Outdoor noncut-off and semicut-off wall-mounted area luminaires Architectural flood and spot luminaires Bollards Landscape/accent flood and spot luminaires Outdoor pole/arm-mounted area and roadway luminaires Outdoor pole/arm-mounted decorative luminaires Stairwell and passageway luminaires LED Outdoor Area Lighting Replace HID systems <10,000 brand/ model number X $50/fixture = Total calculation labor 10,001-30,000 brand/ model number X $75/fixture = Total calculation labor >30,000 brand/ model number X $150/fixture = Total calculation labor Building Exterior Replace HID systems. Replacement LED wall pack fixtures must be used for building exteriors. must be hardwired and rated for exterior use. <10,000 brand/ 10,001-15,000 brand/ >15,000 brand/ model number model number model number X $50/fixture = X $75/fixture = X $100/fixture = Total calculation labor Total calculation labor Total calculation labor Is parking garage where equipment will be installed conditioned? (check one) q Cooled only q Heated only q Not cooled or heated q Both heated and cooled Parking Garage <10,000 brand/ model number Replace HID systems. Replacement LED wall pack fixtures must be used inside parking garages and must be attached to a wall (parking garage ceiling fixtures are not eligible for this rebate but may qualify for the ceiling-mounted LED parking garage fixture rebates). must be hardwired and rated for exterior use. 10,001-15,000 brand/ >15,000 brand/ model number model number If parking garage is heated, what fuel type is used? (check one) q Natural gas (furnace) q Natural gas (boiler) q Electric (resistance heating) q Electric (heat pump) q Propane Actual lumens/fixture Actual lumens/fixture Actual lumens/fixture X $50/fixture = X $75/fixture = X $100/fixture = Total calculation labor Total calculation labor Total calculation labor Page 8 of 12

9 Ceiling-Mounted LED Parking Garage Fixtures (DLC QPL Required) Eligible parking garage structures need to be either underground or semi-enclosed above ground. The lighting within the garage must operate 24 hours a day. Rebates are based on a one-for-one replacement of HID equipment (including mercury vapor, high-pressure sodium, metal halide or pulse-start metal halide). LED retrofit kits are not available for prescriptive rebates. With preapproval before purchase or installation, they may qualify through the Nonresidential Custom Systems program. The program adopts the DLC definitions: Ceiling-mounted luminaires for use outdoors or in locations open to elements in multideck garages. Eligible DLC primary use designation: Parking garage luminaries Is parking garage where equipment will be installed conditioned? (check one) q Cooled only q Heated only q Not cooled or heated q Both heated and cooled If parking garage is heated, what fuel type is used? (check one) q Natural gas (furnace) q Natural gas (boiler) q Electric (resistance heating) q Electric (heat pump) q Propane Ceiling-Mounted LED Parking Garage Fixtures Replace HID systems; parking garage must be illuminated 24/7. <5,000 brand/ 5,001-15,000 brand/ >15,000 brand/ model number model number model number X $135/fixture = X $200/fixture = X $400/fixture = Total calculation labor Total calculation labor Total calculation labor Exterior LED Fuel Pump Canopy Fixtures (DLC QPL Required) Rebates are based on one-for-one replacement of HID canopy fixtures with LED fixtures rated for exterior use. The program adopts the DLC definition: Ceilingmounted luminaires for use outdoors or in locations open to elements in gas station canopies. must be hard-wired and rated for exterior use. Fixtures can be installed in either the canopy or soffit of the gas station building structure. Eligible DLC primary use designation: Fuel pump canopy luminaires Exterior LED Fuel Pump Canopy Fixtures Replace HID systems <5,000 brand/ model number X $135/fixture = Total calculation labor 5,001-15,000 brand/ model number X $200/fixture = Total calculation labor >15,000 brand/ model number X $400/fixture = Total calculation labor Page 9 of 12

10 LED Exit Signs < 2 watts brand/ model number Total calculation Existing building only replacing incandescent or fluorescent sign X $25/fixture = labor Occupancy Sensors Occupancy sensors may be wall- or ceiling-mounted, including passive infrared, ultrasonic or dual technology sensors. Occupancy Sensor brand/ model number Total calculation Minimum 45 watts controlled; rebate level is based on controlled load (watts)/sensor. X $0.10/watt controlled = Total watts controlled Rebate Total labor Lighting Timer or Clock Commercial-grade only brand/ model number Total watts controlled X $35/unit = Total calculation labor Page 10 of 12

11 Specific Terms and Conditions Participants must be commercial or industrial customers with facilities located in MidAmerican Energy Company s Illinois service territory. MidAmerican Energy Company must deliver the electricity to the equipment at the facility for which the rebate is being paid. One-for-one replacement only. Lighting redesigns where the quantity of lamps or fixtures is changed may be eligible for a rebate through Nonresidential Custom Systems. For prescriptive rebates, the rebate payment cannot exceed 50 percent of the installed (reasonable labor and material/equipment - reasonableness to be determined by MidAmerican Energy Company). Installed includes contractor labor only and does not include internal labor. Wattage and lumen output is based on DesignLights Consortium (DLC) listing. Lighting options must meet standards listed in DLC Technical Requirements Table 4.0 and be listed on the most current DLC Qualified Products List (QPL) to be eligible for incentives. Application must include the DLC listing from the QPL when "DLC QPL required" is referenced on the application. Lighting options delisted from the DLC QPL are not eligible for incentives. Commercial new construction projects are not eligible for prescriptive lighting rebates through this program. All commercial new construction projects must participate in the Commercial Construction program in order to receive lighting rebates. Industrial new construction projects are eligible. must be purchased between Jan. 1, 2018, and Dec. 31, must be installed and operating prior to submission of final rebate application. Rebate application must be submitted within six months of dealer invoice, or by Dec. 31, 2018, whichever comes first, for the equipment/material purchased. The rebate will be based on the rebate schedule in effect on the date of dealer invoice for the equipment/material purchased. Rebate applications received after Dec. 31, 2018, are not eligible for rebates. A minimum of 1,000 annual operating hours required. Rebate checks will be issued to the building owner or account holder. Allow 4 6 weeks for rebate processing, excluding on-site verification time, if needed. General Qualifications and Conditions Important: Before completing and signing this form, please read the General Qualifications and Conditions located in the 2018 Illinois For Your Business rebate booklet or at Disclaimer MidAmerican Energy Company does not guarantee that installation and operation of highefficiency equipment will result in reduced usage or in savings. MidAmerican Energy Company makes no warranties, expressed or implied, with respect to any equipment purchased or installed, including, but not limited to, any warranty of merchantability or fitness for a particular purpose. In no event shall MidAmerican Energy Company be held liable for any incidental or consequential damages or injuries resulting from defective equipment or installation. MidAmerican Energy Company reserves the right to cancel or change these programs at any time. MidAmerican Energy Company s acceptance of this application does not guarantee payment of rebate. Customer Agreement I certify that I have purchased the equipment described on this form and that it has been installed at the service address indicated. I agree to the terms and conditions associated with this form. I understand that MidAmerican Energy Company reserves the right to inspect and verify installation before issuing payment. Customer signature Date Dealer name Contact name Address Installer/Dealer Information City State ZIP Phone address Fax Dealer Agreement I certify that all equipment and installation information provided on this application is correct and accurate. Dealer signature Before you submit your form: q Fill out this form completely. q Attach a copy of the itemized sales receipt or invoice. q Include required documentation with each measure. q Sign the Customer Agreement section. For MidAmerican Energy Use Date Send completed forms to: Mail: MidAmerican Energy Company P.O. Box 4628 Des Moines, IA Fax: rebateapplications@midamerican.com Project # Project # Received date Method: E M F IO Assessment # Assessment date KAM-BAM Sector type Rebate total amount $ Page 11 of 12

12 Example of DLC Primary Use Designations DLC Product ID (Required on application) Example of DLC Primary Use Designation Sample Invoice Date: January 31, 2018 INVOICE #: SHIP TO: XYZ Company 234 Jersey St. Des Moines, IA TO: XYZ Company 234 Jersey St. Des Moines, IA PO number: Terms: Net 25 Include project codes and/or item numbers Specify the quantity for each item Identify s part information List price for each item and total ITEM QTY DESCRIPTION RATE SERVICE DATE AMOUNT LED30WCW 100 Acme 30W LED lamp $35 $3, DEC27W Acme 27W LED lamp $125 $3, HD B blue wire nut $0.16 $32.00 Installed LED lamps and downlights Subtotal $6, Local sales tax 7.5% $ Labor 1 Labor $448 1/2/2018 $ Total $7, Travel 0 Travel $64 $0 Environmental Fee Environmental Fee $ /2/2018 $82.11 Note labor and other expenses separately from material s Give accurate description of work completed Page 12 of 12