Suspended ceiling with visible T-sections
|
|
- Julie Marsh
- 6 years ago
- Views:
Transcription
1 Suspended eiling with visible T-setions a E E E max. 300 mm a m Hanger spaing 1 Hanging system: Rihter System 11.2 D 2 E C 26 C Main setion spaing E A
2 Suspended eiling with visible T-setions Produts Table 13 Produt Thikness mm Weight kg/m 2 Edge Design **) Centre distane of the ross joist mm Panel dimensions*) mm Produt Range Produt Range A2 Produt Range Plus Heradesign superfine Heradesign fine Heradesign superfine 25 / / 15.0 Heradesign fine 25 / / 16.3 Heradesign miro 25 / / 19.0 Heradesign superfine A Heradesign fine A SK-04 SK-04 SK-05 SK-06 Heradesign superfine A SK-04 SK-05 Heradesign fine A SK-06 Heradesign superfine plus Heradesign fine plus 55 (15/40) (25/40) (15/40) (25/40) 16.0 Heradesign miro plus 65 (25/40) 18.6 ; 1200/600 ; 1250/625 SK-04 ; 1200/600 SK-04 plus ; 1200/ /594; 1194/ /619; 1244/ /594; 1194/ /594; 1194/ / /594 Installation method 1 Installation method 2 Installation method 3 Installation method 4 e e e am ar e e e am ar e e e am ar e e am ar Suspended eiling with visible T-setions Heradesign plano plus 65 (25/40) 18.6 *) Large format for 15 mm thik panels not suitable for outdoor appliations and indoor swimming pools. **) Edge details see page 53. Please note: Knauf Insulation GmbH is not a system holder aording to DIN-EN = 600 or 625 mm e = 600 or 625 mm e = 1200 or 1250mm = 1200 or 1250 mm e = 600 or 625 mm = 1200 or 1250 mm e = 600 or 625 mm = 1200 or 1250 mm e = 1200 or 1250 mm 27
3 Suspended eiling with visible T-setions Maximum spaing of the substruture and hanger material requirements Maximum setion and hanger spaing for defletion lass 1 aording to EN (max. defletion L/500) Table 14 System Max. spaing 2) 3) ments (without utting losses Approx. material require- or other losses) Loading level 1) kn/m 2 Grid dimensions (mm) Main setions (mm) E (mm) 4) Hangers 3) a m (mm) a E (mm) Hangers 3) Piees/m ) ) / ) The load limit is omprised of the dead weight of the Heradesign aousti panel, the weight of the absorber layer plus any wind sution fores that may have to be inluded in the alulation. Fittings suh as eiling lights, sprinkler systems, et. must be hung separately. 2) Appliable to T24/38 setions, material thikness at least 0.4 mm, as per DIN ) Approved hanger load: at least 0.15 kn. Material requirements are dependent on the installation system. Observe manufaturer s information. 4) Max. distane E for EI-30 eilings: 300 mm; for F 30 eilings: 350 mm. 5) A distane of 1200 mm is permitted for T24/38 ross setions. Please note: Max. free span of the aousti panels is 600 or 625 mm. For F 30, EI 30 eilings, only ertified substrutures may be used. The proessing guidelines of the manufaturer must be observed. For ertified eiling strutures, no hanges may be made to the design as set out in the ertified onstrution. 28
4 Suspended eiling with visible T-setions Material requirements Table 15 Assembly omponent A Main setion 2) T24/38 Cross setion 3) T24/38, T24/32 or T24/28 r.m. r.m Approx. material requirements / m² eiling area 1) 1200/ / Comment Installation sheme 1: = 600; 625 mm Inst. sheme: 2+3+4: = 1200; 1250 mm Inst. sheme 1: = 600; 625 mm Inst. sheme 2: = 1200; 1250 mm e = 600; 625 mm Inst. sheme 3: = 1200; 1250 mm Inst. sheme 4: = 1200; 1225 mm e = 1200; 1250 mm C Wall angle r.m Requirements are dependent on floor plan D Panel lamp 4) approx. piees Only for panel thikness of 15 mm E Wall spring Hangers: see Table 14, page 28 approx. piees Requirements are dependent on floor plan 1) The material requirements are dependent on the installation system. Observe information from manufaturer. The speified values are non-binding guide values without utting losses or other losses. 2) Stagger the setion joints and plae an additional hanger beside eah joint. 3) Cross setion must not lie on the lower flange of the main setion. Only use ross setions with a disengaged lower flange. Max. span for T24/28 setions: 625 mm. 4) Panel lamps are reommended to hold down the panels if high wind pressure loads our. Attention: limited aess possibility to the eiling avity. Suspended eiling with visible T-setions Please note: Speial orrosion protetion is needed for all metalli parts in indoor swimming pools, outdoor appliations, or appliations with an inreased risk of orrosion. For F 30, EI 30 eilings, only ertified substrutures may be used. Ceiling strutures as per ertifiate: no hanges may be made to the design as set out in the ertified onstrution. Minimum hanging heights: In order to be able to insert the aousti panels in preinstalled hanging systems, the following minimum hanging heights (HH = lower edge of T-setion to lower edge of bare eiling) must be maintained. Panel thikness 15 mm min. HH approx. 180 mm Panel thikness 25 mm min. HH approx. 200 mm Panel thikness 35 mm min. HH approx. 220 mm Inreased installation omplexity! Vernier hanging: min. HH approx. 190 mm 29
5 Suspended eiling with visible T-setions Ceiling in an F 30 design with Heradesign fine or Heradesign miro aousti panels Thikness 25 mm, insertion installation in visible T24-setions Certifiate: ibmb 3564/905/08 / Test Institute: ibmb Braunshweig (max. defletion L/500 4 mm) a E max. 700 mm a m Detail C1 Detail C Heradesign aousti panel, 25 or 35 mm 2 T-24/38 Profil 3 Contat angle 24 x 24 x 0.5 mm Srews 6 x 50 in metal expansion plugs 4 KI DP-5 lining, 2 x 50 mm Alternative: KI DP-4 lining, 2 x 60 mm 5 Quik hanger with tension spring or vernier hanger max. spaing a E see the table on page 28 Ceiling in an F 30 design with Heradesign superfine aousti panels Thikness 25 mm, insertion installation in visible T24-setions Certifiate: ibmb 3564/905/08 / Test Institute: ibmb Braunshweig a E 5 a m 700 mm 5 min. 300 mm Detail C3 1 Heradesign superfine, 25 mm 2 Main setion T-24/38 mm Cross setion T-24/38 mm 3 Contat angle 21 x 21 x 0.5 mm with metal expanding nail 6/35, spaing 600 mm Detail C4 4 KI-DP-5 rok wool, thikness 50 mm, 2-layer 5 Quik hanger with tension spring, hanging wire Ø 4 mm max. spaing a E see Tehnial Manual, Table 14, page 28 6 Wall spring as a spaer Attention: the lassifiations only apply to the tested strutures. A hange in the eiling struture is not permitted. The exat test assemblies an be found in the indiated ertifiates or data sheet of the respetive design. 30
6 Suspended eiling with visible T-setions Short hangers Type 21,1 HH = 100 mm CMC-Clips Type 21,8 HH = 80 mm CMC-Clips Type 21,5 HH = 50 mm CMC-Clips only for 15/25 mm panel thikness HH = hanging height Short hangers for Clix T-setions Rihter System AH Suspended eiling with visible T-setions Table 16 Type Height Max. load CMC-Clips 21.5 HH = 50 mm CMC-Clips 21.8 HH = 80 mm 45 kg CMC-Clips 21.1 HH = 100 mm Short hangers for Clix T-setions HH = 82 bis 113 mm 15 kg Attention: for these installation heights, the panels must slide in from the side using T-setions. The hanging system and the panels an only be installed setion for setion. Inreased installation omplexity! 31
7 Suspended eiling with visible T-setions Installation photos Constrution of eiling grid, making sure of equally sized end fields. Stagger the setion joints. An additional hanger must be plaed beside eah joint. Max. spaing see table on page 28. Only use ross setions with a disengaged lower flange. Set all seuring pegs of vernier hangers in the same diretion and pinh hooks of hanging wires. This simplifies the insertion of the panels. Lift the Heradesign aousti panels by tilting the aousti panels and using the eiling avity. Take into onsideration the minimum hanging heights. Observe the installation diretion marked on the bak when installing square panels. Press down the Heradesign aousti panels. The panels are ut exatly to size; therefore they have to be pressed past the hangers. Edge panels must be seured with wall springs to avoid displaement. Install Heradesign aousti lining piee by piee along with the Heradesign aousti panels. 32
8 Suspended eiling with visible T-setions Mounting information For the implementation requirements, see DIN T.1 Lightweight eiling linings and suspended eilings, or alternatively DIN-EN Suspended eilings requirements and test methods. suffiient load-bearing apaity. Mount the wall angle setion C at the desired height. Distribute the main load-bearing axes while making sure of equal edge fields. Minimum width of the edge fields: 300 mm. Mount the quik hangers with tension spring 1 and hook/slider or Twist hanger 2; hang and adjust the main setions A. Hanging wire: 4 mm minimum diameter. Pinh hook with pliers after hanging in. Set all seuring pegs of vernier hangers to the same diretion. This simplifies the insertion of the panels. Stagger and plae the trak joints and hangers; one additional hanger must be plaed beside eah joint. main setions A for eah field, making sure of equally sized end fields. Insert the Heradesign aousti panels setion for setion starting in the entre of the room and then moving out. Observe the installation diretion marked on the bak when installing square panels. Panels with the edge design GK straight edge must not be installed. The panel dimensions are too big for the grid dimensions SK-04. Insert the edge panels into the wall angle setion C with approx. 10 mm of airspae and fasten with wall spring E. Minimum support width for Heradesign panels on the ontat angle: 10 mm. 15 mm thik panels must be fastened from above with panel lamps. Diagonal hanging and vernier hanger Please note: for suspended eilings that are subjet to swaying and for large suspension heights, or where the hangers are fastened to steel or wood strutures, an adequate number of hangers must be set diagonally in both diretions in order to minimise the swaying of the eiling. Ceiling statis are neessary. For F 30/EI 30 onstrutions: only use approved hanging systems. Mineral wool is inserted piee by piee with the installation of the aousti panels. The orrosion protetion of all metal parts must be mathed to the onditions prevailing in the room. Ceiling grids of T24/38 or T35/39 rails may not be walked on. Damaged or soiled panels or panels with olour deviations may not be installed. Wall mounting 34 Light installation details 58 Proessing 68 Please request expert opinion if required. Suspended eiling with visible T-setions 33
KE double wall transport anchors
for better solutions... KE double wall transport anhors The safe transport anhor for double walls KE Ttransport anhors - Transport double walls seurely www.h-bau.de Contat Oslo Helsinki Mosow London Warsaw
More informationTS110 Visible (exposed) fixing with screws on an aluminum sub-frame
TS110 Visile (exposed) fixing with srews on an aluminum su-frame This system offers a ost effetive solution for installing Trespa panels in a large variety of panel dimensions. Trespa Meteon panels with
More information7001 Diamond Snap-Form ICF Code Considerations With the multitude of lightweight onrete forming systems in the onstrution market, building offiials are raising questions about ode ompliane and/or ode evaluation
More informationTS Invisible (concealed) sub-frame
TS210-285 Invisile (onealed) raket-railfix on an aluminum su-frame This system offers large flexiility for installing Trespa Meteon panels, the use of adjustale rakets allow for preise joints and an optimal
More informationModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!
ModuSe Seure and effiient IT room solutions Composite Panel Systems Compared Panel Systems are not all the same! When it omes to aommodating ritial IT systems, the first issue to look at is the environment
More informationBBR VT CONA CMI BT. Internal Post-tensioning System with 02 to 61 Strands. European Technical Assessment ETA 09/0286
BBR VT with 02 to 61 Strands European Tehnial Assessment ETA 09/0286 0432 ETA-09/0286 BBR VT with 02 to 61 Strands BBR VT International Ltd Ringstrasse 2, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om
More informationBBR VT CONA CMI SP. Internal Post-tensioning System with 01 to 61 Strands. European Technical Assessment ETA 09/0287
BBR VT with 01 to 61 Strands European Tehnial Assessment ETA 09/0287 0432 ETA-09/0287 BBR VT with 01 to 61 Strands BBR VT International Ltd Ringstrasse 2, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om
More informationBBR VT CONA CMI BT. Internal Post-tensioning System with 02 to 61 Strands. European Technical Approval ETA 09/0286
BBR VT with 02 to 61 Strands European Tehnial Approval ETA 09/0286 0432 BBR VT with 02 to 61 Strands BBR VT International Ltd Bahnstrasse 23, 8603 Shwerzenbah (Switzerland) www.bbrnetwork.om S P E C I
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More informationTHE CRAFTSMAN MODEL SILVESTRI GROUP
05, Inc. DESIGN GRO PROJET # 05-30 THE RAFTSMAN FOR GRO ANY HANGES TO THESE DRAWINGS MUST BE REPORTED TO DESIGN GRO, IN. IMMEDIATELY IN WRITING. DESIGN GRO, IN ASSUMES NO RESPONSIBILITY FOR HANGES TO THE
More informationZZINC G A Chemical Anchors A4 INOX MIC80 Rebar Fixz (Hybrid Mortar) with VA Rods
11.0 Chemial Anhors 11.1 MIC80 Rebar Fixz (Hybrid Mortar) with VA Rods Produt Features Aurate self-mixing system for guaranteed quality Cure resin is stronger than the substrate Suitable for lose edge
More informationHeradesign Technical Manual
Heradesign Technical Manual Table of Contents 1. Products and Characteristics Product line Trend Decorative 1-layer panels... 5 Heradesign superfine /A2 Heradesign micro Heradesign plano Edges, Colours,
More information] Anchor Size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39. ] Anchor Size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
11.0 Chemial Anhors 11.5 EPC80 (Pure Epoxy Resin) with VA Rods Produt Features Espeially suitable to high load in onrete appliation Reommended for threaded stud and rebar; either fixation or strutural
More informationEI 30 barriere Self contained fire protection EI 30 from above and below smoke impervious EN
O W A c e i l i n g i n f o r m a t i o n OWAcoustic EI 0 barriere Self contained fire protection EI 0 from above and below smoke impervious EN 4- Self contained fire protection EI 0 EI 0 barriere A Element
More informationProposal for a new shear design method
Chapter 6 Proposal for a new shear design method The behaviour of beams failing in shear has been studied in the previous hapters, with speial attention paid to high-strength onrete beams. Some aspets
More informationPost-Tensioned Two-Way Slab
The Medial Oie Building Malvern, PA 13 Post-Tensioned Two-Way Slab Introdution The Filigree beam system reates a thin lightweight loor system that leaves plenty o open plenum spae or mehanial and eletrial
More informationSHEAR CAPACITY FOR PRESTRESSED-PREFABRICATED HOLLOW CORE CONCRETE SLABS,WITHOUT SHEAR REINFORCEMENT
SHEAR CAPACTY FOR PRESTRESSED-PREFABRCATED HOLLOW CORE CONCRETE SLABS,WTHOUT SHEAR RENFORCEMENT A B S T R A C T PNTEA Augustin, Tehnial University of Cluj-Napoa, e-mail: augustinpintea@yahoo.om Euroode
More informationPROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS
Institute of Industrial Siene, University of Tokyo Bulletin of ERS, No. 37 PROPOSAL OF A STANDARD FOR SEISMIC DESIGN OF CONFINED MASONRY BUILDINGS Angel SAN BARTOLOME 1, Daniel QUIUN 1 and Paola MAYORCA
More informationData sheet METAL-PLATE CHIP RESISTOR; LOW OHM RLP16,20,32,63, MLP20,32,63. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spe. No.: RLP K HTS 0001 /12 Date: 2017. 4. 21 Data sheet Title: Style: METAL-PLATE CHIP RESISTOR; LOW OHM RLP16,20,32,63, MLP20,32,63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
More informationFINITE ELEMENT MODELLING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE
FINITE ELEMENT MODELLING OF STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH PRESTRESSED CFRP PLATE H.Y. Omran 1, P. Zangeneh 2, and R. EL-Haha 3 1 PhD student, Department of Civil Engineering, University
More informationBasic Suspension Systems
CEILING & WALL SYSTEMS Commercial Ceilings and Walls Solutions Guide Installing Armstrong Suspended Ceilings The ceiling system is made up of Armstrong panels which are supported by a suspension system
More informationWeb buckling strength of beam-to-column connections, September 1970 (74-1) PB / AS
Lehigh University Lehigh Preserve Fritz Laboratory Reports Civil and Environmental Engineering 1970 Web bukling strength of beam-to-olumn onnetions, September 1970 (74-1) PB 234 621/ AS W. F. Chen I. J.
More informationSDI-C-2011 Standard for Composite Steel Floor Deck-Slabs 30 November General
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1. General SDI-C-2011 Standard for Composite Steel Floor Dek-Slabs 30 November
More informationAvailable online at ScienceDirect. Procedia Engineering 81 (2014 )
Available online at www.sienediret.om SieneDiret Proedia Engineering 81 (214 ) 2184 2189 11th International Conferene on Tehnology of Plastiity, ICTP 214, 19-24 Otober 214, Nagoya Congress Center, Nagoya,
More informationDimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) (Rev.1 Aug 2014) (Rev.2 Apr 2015) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Sope This UR applies to propulsion shafts
More informationMULTI-MAX Threaded stud zinc coated & stainless steel versions
Metharylate hemial resin for use in non-raked onrete d T inst d f APPLICATIO h ef = h 0 Fixing steel framed strutures Fixing mahinery (resistant to vibration) Fixing of storage silos, refinery pipework
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More informationPENNSAFE BUILDING INSPECTION SERVICES LLC PERMIT APPLICATION
PENNSAFE BUILDING INSPECTION SERVICES LLC PERMIT APPLICATION Permit No. 175 Beaver Drive, P.O. Box 486 DuBois, PA 15801 Phone: 814-375-1111 Fax: 814-375-1117 Toll Free: 855-PENNSAF LOCATION OF PROPOSED
More informationCI/SfB. June RockLink 24 Monolith. Installation system
I/SfB (35) Xh2 June 2008 RockLink 24 Monolith Installation system RockLink 24 Monolith Gypsum / MF plasterboard border Rockfon s with edge detail D in module size x are suit able for installation using
More informationAcoustic & Décor Programme
Acoustic & Décor Prograe 1 Bürgerbüro Weinstadt / Germany / superfine Timelessly modern and worldwide in demand Success stories like the one of the magnesite bonded wood wool acoustic panel are always
More informationten reinforced concrete construction Concrete Concrete Materials Concrete Construction columns beams slabs domes footings
APPLID ACHITCTURAL STRUCTURS: STRUCTURAL ANALYSIS AND SYSTMS DR. ANN NICHOLS FALL 01 leture ten Conrete olumns beams slabs domes ootings http://nisee.berkeley.edu/godden reinored onrete onstrution http://nisee.berkeley.edu/godden
More informationTRASH ENCLOSURE APPLICATION Application Date / /
Status Stiker OFFICIAL USE ONLY Community Development - 1050 W Romeo Rd, Romeoville, IL 60446-1530 (815) 886-7200 Fax #: (815) 886-2724 - Email: buildinginspetions@romeoville.org Only Permit #: Permit
More informationMevaFlex Assembly and Operating Instructions
Assembly and Operating Instructions is a slab formwork which is not restricted by modular dimensions and therefore doesn't dictate to any rules of a modular system. Due to the versatility of the system,
More informationSTORAGE DESIGN LIMITED - Apex Longspan Literature. The Fundamentals... Can be manufactured to specific sizes at no additional cost
Longspan Shelving The Fundamentals... 5mm adjustability Multiple beam duties Assembled frames Stepped beam profile Hanging garment rail Multi-tier apability an be manufatured to speifi sizes at no additional
More informationS7 Taifun Installation Manual
CEIL ING LIGHTING AMBIENCE S7 Taifun Installation Manual GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe
More informationSYSTEM S4-RHOMBOS INSTALLATION MANUAL
SYSTEM S4-RHOMBOS INSTALLATION MANUAL GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe the related/relevant
More informationDESIGN MANUAL FOR PURLIN AND CLADDING RAIL SYSTEMS
11198 Purlin Manual Cover.qxd:11198 Purlin Manual Cover.qxd 2/4/12 16:30 Page 1 DESIGN MANUAL FOR PURLIN AND CLADDING RAIL SYSTEMS AYRSHIRE METAL PRODUCTS (Daventry) Ltd. Royal Oak Way, Daventry, Northamptonshire
More informationd S1 HDA-P cut-out for setting /removal tool, turned through 90 l S
HDA - Dimensions HDA-T d S3 d S2 d S1 ut-out for setting / removal tool, turned through 90 d C l S d B AF l B HDA-P d S3 d S2 d S1 ut-out for setting /removal tool, turned through 90 d C l S d B AF l B
More informationEN 1065 ULTRADECK SLAB SYSTEM
. M. B. G G I p i m p i u u q e q g n e i d l i bu g n i d l i u EN 1065 b ULTRADECK SLAB SYSTEM P O N T E G s t en Maximum flexibility and quickest forming time for mounting of all ceiling types Flexible:
More informationSYSTEM S7-RHOMBOS INSTALLATION MANUAL
SYSTEM S7-RHOMBOS INSTALLATION MANUAL GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe the related/relevant
More informationEgger Ergo Board This board allows you to take it easy.
Egger Ergo Board This board allows you to take it easy. 1 Contents 1 Product advantages 4 Quick and easy 4 Easy installation requiring little cut 4 Stable grip 5 Safe from fire and noise 5 2 Other advantages
More informationMETALWORKS RH215 Faceted Custom Hook-on Panels
METALWORKS RH215 Faceted Custom Hook-on Panels Assembly and Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks RH215 Faceted Custom Hook-on panel system is a downward accessible, custom
More informationJ. A. Avila Institute of Engineering, National University of Mexico (UNAM), Mexico. Abstract. 1 Introduction
High Performane Strutures and Materials V 99 Prinipal results of the inelasti seismi performane of a 17-story RC building loated in the soft-soil area in Mexio City with normal-strength onrete and with
More informationTapper Concrete Scew Anchor Type 410 & 304 Stainless Steel
Conrete Sew Type 4 & 304 PRODUCT DESCRIPTION The fastening system is a family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base materials. The is fast an easy to install
More informationMetal ceilings. OWAtecta. OWAtecta Why metal ceilings. Planning with OWAtecta Variety formation of the ceiling
Metal ceilings Why metal ceilings Metal ceilings are different. The density of their surface and the aesthetic restraint of their design offer the architect and builder particular creative options and
More informationNote. Floor beams can also be made from wooden beams put through the holes in the longitudinal beam and boards nailed to it.
Assembly instructions for HAKI IV These assembly instructions are designed for the construction of sectional HAKI IV scaffolding approved in accordance with the technical standards TP 73-05-60/020/83.
More informationComposite Steel Floor Deck-Slabs
AMERICAN NATIONAL STANDARDS / STEEL DECK C - 2017 Standard for Composite Steel Floor Dek-Slabs opyright 2017 steel dek institute 1. General AMERICAN NATIONAL STANDARDS / STEEL DECK 1.1 Sope: A. This Standard
More informationNumerical Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwich Structures
Journal of Metals, Materials and Minerals, Vol.18 No.2 pp.111-115, 2008 Numerial Modeling and Experimental Investigation of the Failure Modes of the Cellular Foam Sandwih Strutures Jörg FELDHUSEN 1, Sirihai
More informationASSEMBLY AND OPERATING MANUAL LTW SLIDE RAIL SYSTEM - Type FP
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More information4.1 Design of Members
restressed Conrete Strutures Dr. Amlan K Sengupta and ro. Devdas Menon 4.1 Design o Members This setion overs the ollowing topis Calulation o Demand Design o Setions or Axial Tension Introdution The design
More informationDécor & Acoustic Product range
Décor & Acoustic Product range Loft Office Fascinating acoustic solutions visibly and invisibly Swimming pool Success stories such as the magnesite bonded wood wool panel are always a combination of a
More informationSystem S 9a / S 9b. demountable. OWAlifetime collection
System S 9a / S 9b Concealed OWAlifetime collection System S 9a concealed, 8 Hanger no. /0, centres 0 mm Main tee no. 0, centres 0 mm Connector no. Spring clip no. 0 ( per cross joint) Stepped Z-profile
More informationInstallation Manual For Dimension4 Symphony Home Cinema Acoustical Tuning System
Installation Manual For Dimension4 Symphony Home Cinema Acoustical Tuning System Distributed by Media Specialty Resources, Inc. 61 A Galli Drive Novato CA 94949, USA Toll Free: 1-800-497-2087 Fax: 1-415-883-8147
More informationMODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM)
MODELING FLEXIBLE PACKAGE/GRANULAR MATERIAL INTERATION THROUGH COMBINATION OF DISCRETE ELEMENT METHOD (DEM) AND FINITE ELEMENT METHOD (FEM) Wenbo Xu, Pavan Valavala, Mark Mirgon, Sam Crabtree, Lori Kardos,
More informationROCKFON SYSTEM T24 X
System description ROCKFON SYSTEM T24 X Concealed ceiling system Continuous expression GRP SYSTE E asy integration of services X EDGE WAR YEARS IT LIM ED Quick and easy to install M NT Y L ow installation
More informationA flush collector beam end plate is used to allow for the placement of the floor deck on top of the collector beam.
EARTHQUAKE Eentrially Braed Frames with Removable Links Design Methodology Author: Kevin Cowie a, Alistair Fussell a, Martin Wong a, Charles Clifton b, Dmitry Volynkin b Affiliation: a. Steel Constrution
More informationS4 Taifun Installation Manual
CEIL ING LIGHTING AMBIENCE S4 Taifun Installation Manual GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe
More informationRockfon System T24 Stepped Z D
Part of the ROCKWOOL Group Rockfon System T24 Stepped Z D System Description D-edge Clip 120 Concealed ceiling system Continuous expression -- Elegant, continous ceiling expression -- Every single tile
More informationStockholm recycling bin
1/8 Stokholm reyling bin Reyling Bins Colletives Spaes Indoor/Outdoor Front Door Reyling Bin, Modularity & Unlimited Combinations Reyling bin of design, high performane & versions Upper sorting slots,
More informationTensile Force Evaluation of Unbonded PT Bars in Precast Concrete Columns
Fédération Internationale du Béton Proeedings of the 2 nd International Congress ID 2-32 Session 2 Tensile Fore Evaluation of Unbonded PT Bars in Preast Conrete Columns Tani, M., Nishiyama, M. Department
More informationlindab we simplify construction LindabSandwichPanels Installation instructions Mineral Wool Panels
lindab we simplify construction LindabSandwichPanels Installation instructions Mineral Wool Panels Assembly instructions Handling Receiving of goods Check that the material has not been damaged in transit
More informationSYSTEM ATHMOS INSTALLATION MANUAL
SYSTEM ATHMOS INSTALLATION MANUAL GENERAL INFORMATION GENERAL INFORMATION This assembly manual addresses all metal ceilings manufactured by durlum. The different sections describe the related/relevant
More informationsystem 200/205 modular hook-on tiles (concealed grid) SAS International +44 (0)
metal ceilings system 200/205 modular hook-on tiles (concealed grid) SAS International +44 (0) 118 929 0900 www.sasint.co.uk system 200 information System Description SAS System 200 is a range of square,
More informationExperimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
Civil Engineering Dimension, Vol. 19, No. 1, Marh 017, 9-5 ISSN 1410-950 print / ISSN 1979-570X online DOI: 10.9744/CED.19.1.9-5 Experimental and Theoretial Defletions of Hybrid Composite Sandwih Panel
More informationAdjustable Suspension Hanger Technical Datasheet
Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through
More informationInternational Journal of Research (IJR) e-issn: , p- ISSN: X Volume 3, Issue 01, January 2016
International Journal of Researh (IJR) Available at http://internationaljournalofresearh.org Study of failure probability by deterministi method reliability-strength applied to metal ables intended for
More informationFinite Element Modeling of Pre-Stressed Hollow Core Slabs
Current Siene International Volume : 04 Issue : 04 Ot.-De. 2015 Pages :596-603 Finite Element Modeling of Pre-Stressed Hollow Core Slabs 1 Ali N. Deeb, 2 M. Abou Zeid Tarkhan and 3 E. M. El-Tehewy 1 Syrian
More informationFinite Element Analysis of sustainable and deconstructable semi-rigid beam-tocolumn. composite joints
ICCM214 28-3 th July, Cambridge, England Finite Element Analysis of sustainable and deonstrutable semi-rigid beam-toolumn omposite joints *Abdolreza Ataei 1, Mark A. Bradford 2 1,2 Centre for Infrastruture
More informationCamber Variability in Prestressed Concrete Bridge Beams
CONCRETE BRIDGE TECHNOLOGY Camber Variability in Prestressed Conrete Bridge Beams by Dr. Maher Tadros, econstrut Beams ast with extra amber in storage yard at Conrete Tehnology Corporation; amber shown
More informationVancouver Benches. Datasheet. Street Furniture. Benches & Chairs of Design, Strength,. Comfortable & Ecologic
1/11 Vanouver Benhes Benhes & Chairs of Design, Strength,. Comfortable & Eologi Versions: Benh & Chair (5 or 6 boards) & Bakless Benh Suitable in three material versions, Pine (SFC) wood, Tropial (SFC)
More informationOCTARIG SUSPENDED A CLASSIC. WIDE SPANS. WITHOUT COMPROMISE.
OCTA RIG OCTARIG SUSPENDED A CLASSIC. WIDE SPANS. WITHOUT COMPROMISE. R 102 DIMENSIONS IN MM: 80 240 40 40 31.8 1 System. 3 Designs. Suspended, elevated or as pylon construction OCTArig gives you the freedom
More informationTHE ENERGY DISSIPATION EFFECTS OF REDUNDANT MEMBERS IN SILOS UNDER EARTHQUAKES
269 THE ENEGY DISSIPATION EFFECTS OF EDUNDANT MEMBES IN SILOS UNDE EATHQUAKES Li Zhiming 1 and Geng Shujiang 1 SUMMAY An analytial study is made the response to strong base motion reinfored onrete silo
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.1.
The following exerpt are pages from the North Amerian Produt Tehnial Guide, Volume 2: Anhor Fastening, Edition 16.1. Please refer to the publiation in its entirety for omplete details on this produt inluding
More informationInstallation Manual For Dimension4 Sonata Home Cinema Acoustical Tuning System
Installation Manual For Dimension4 Sonata Home Cinema Acoustical Tuning System Distributed by Media Specialty Resources, Inc. 61 Galli Drive, Suite A, Novato CA94949, USA Toll Free: 1-800-497-2087 Tel:
More informationMetal ceilings. OWAtecta. OWAtecta Why metal ceilings. Planning with OWAtecta Variety formation of the ceiling
Metal ceilings Why metal ceilings Metal ceilings are different. The density of their surface and the aesthetic restraint of their design offer the architect and builder particular creative options and
More informationSystem F - Free Span Systems
System F - Free Span Systems System F 1.1: THERMATEX GN (non) demountable System F 1.2: THERMATEX AW demountable System F 1.3: THERMATEX VT demountable System F 4.1: MONDENA corridor system System F as
More informationAPPLICATION OF BASE ISOLATION IN HIGH VOLTAGE ELECTRICAL EQUIPMENT.
The th World Conferene on Earthquake Engineering Otober 7, 8, Beijing, China APPLICATION OF BASE ISOLATION IN HIGH VOLTAGE ELECTRICAL EQUIPMENT ABSTRACT: Han Junke, Zhang Chunlei, Yang Fengli, Cao Meigen
More informationThe influence of pallets on the behaviour and design of steel drive-in storage racks - Part II Design
University of Wollongong Researh Online Faulty of Engineering and Information Sienes - Papers: Part A Faulty of Engineering and Information Sienes 2013 The influene of pallets on the behaviour and design
More informationGRIDFLEX The flexible slab formwork with safe accessible grid elements
GRIDFLEX The flexible slab formwork with safe accessible grid elements 07044 Edition 04 2011 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax
More information(Suited for seismic categories A, B, C, D, E, F)
Ecophon Focus Dg 4x4 Installation Instructions (Suited for seismic categories, B, C, D, E, F) 8 2 3 7 4 6 1 5 Components: 1. Ecophon Focus Dg Panel (4 x4 ) 2. CertainTeed 15/16 Classic Main Runners 3.
More information3.1. FOLDABLE WORKING PLATFORMS. and accessories
.1. FOLDABLE WORKING PLATFORMS and accessories SAFETY TECHNOLOGY FOLDABLE WORKING PLATFORMS AND ACCESSORIES GENERAL INFORMATION INDEX General information.....................................................................
More informationROCKFON SYSTEM ULTRALINE E
System description ROCKFON SYSTEM ULTRALINE E Visible grid ceiling system SYSTE F unctional recess allows for the easy integration of partitions, track lighting and signage E15S8 EDGE WAR YEARS IT LIM
More informationShear Transfer Strength Evaluation for Ultra-High Performance Fiber Reinforced Concrete
Shear Transfer Strength Evaluation for Ultra-High Performane Fiber Reinfored Conrete Ji-hyung Lee, and Sung-gul Hong Abstrat Ultra High Performane Fiber Reinfored Conrete (UHPFRC) is distinguished from
More informationThe Passive Fire Protection Handbook
The Passive Fire Protection Handbook The UK s comprehensive guide to passive fire protection Chapter Ceilings, Floors and Roofs AUGUST 0 The Passive Fire Protection Handbook Contents Chapter : Introduction
More informationTests on Reinforced Concrete Slabs with Pre-stressing and with Transverse Reinforcement under Impact Loading
20th International Conferene on Strutural Mehanis in Reator Tehnology (SMiRT 20) Espoo, Finland, August 9-14, 2009 SMiRT 20-Division 5, Paper 2015 Tests on Reinfored Conrete Slabs with Pre-stressing and
More informationKnauf C-Form Suspended Ceilings
Knauf C-Form Suspended Ceilings The Knauf C-Form Suspended Ceiling system uses the minimum number of different components and is extremely easy and quick to install. The system is very strong and perfect
More informationGESTRA Steam Systems. Product Range A1 UNA 23h/v UNA 25h/v UNA 26h/v UNA 26h Stainless Steel
Issue Date: 4/09 GETRA team ystems team Traps UNA 23h/v, PN 1, DN 15, 20, 25, 40, 50 UNA 25h/v, PN 40, DN 15, 20, 25, 40, 50 UNA 2h/v, PN 40, DN 15, 20, 25, 40, 50 UNA 2h tainless teel, PN 40, DN 15, 20,
More informationBUILDINGS & PHOTOVOLTAICS GRID-CONNECTED PV-SYSTEMS
Bekaert ECD Solar Systems LLC R BUILDINGS & PHOTOVOLTAICS GRID-CONNECTED PV-SYSTEMS Unique Photovoltai Tehnology based on: Shingles Metal Roofing Framed Power Modules UNI-SOLAR ROOFING SYSTEMS The leader
More informationCorrosion of reinforcing steel is widely accepted as the
Strength eterioration of Reinfored Conrete Columns Exposed to Chloride Attak R. Greo, G.C. Marano Abstrat This paper fouses on reinfored onrete olumns load arrying apaity degradation over time due to hloride
More informationLaboratory beating of pulp (valley beater method)
T 200 sp-96 TENTATIVE STANDARD 1930 OFFICIAL STANDARD 1932 TENTATIVE STANDARD 1960 OFFICIAL STANDARD 1970 OFFICIAL TEST METHOD 1985 REVISED 1989 STANDARD PRACTICE 1996 CORRECTED 1997 1997 TAPPI The information
More informationLOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by
LOW FREQUENCY BUCKETS FOR INDUSTRIAL STEAM TURBINES by Firm L. Weaver Engineering Consultant Sun City Center, Florida Firm L. Weaver graduated from Roanoke Coll ege, in Salem, Virginia, with a B.S. degree
More informationASSEMBLY AND OPERATING MANUAL LTW SLIDE RAIL SYSTEM - Type PV
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationInstallation Manual For Dimension4 Harmony Home Cinema Acoustical Tuning System
Installation Manual For Dimension4 Harmony Home Cinema Acoustical Tuning System Media Specialty Resources, Inc. 61 A Galli Drive, Novato CA 94949, USA Toll Free: 1-800-497-2087 Fax: 1-415-883-8147 Email:
More informationDUOline. The innovative product line with. More functions More performance More security NEW. fischer DUO - Line. More power, more intelligence
DUOline The innovative product line with More functions More performance More security fischer DUO - Line More power, more intelligence NEW DUO-Line Intelligent combinations for more power and intelligence.
More informationBuildup Factors Calculation for a 1-MeV Point Isotropic Source in Iron, Concrete, and. Water. Skyler Butler, Maria Pinilla
Buildup Fators Calulation for a 1-MeV Point Isotropi Soure in Iron, Conrete, and Water Skyler Butler, Maria Pinilla Abstrat This experiment alulates the buildup fators for 1-MeV point isotropi soure of
More information