ACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS
|
|
|
- Jade Maxwell
- 6 years ago
- Views:
Transcription
1 ACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS
2 ACOUSTICAL DUCT AND PIPE LAGGING Acoustical Lagging is wrapped around the outside of duct or pipe to reduce the radiated noise transmitting through the walls of the ductwork or piping. It is different from, and often used in conjunction with, a duct liner that is installed inside a duct to reduce noise exiting from downstream registers and vents. FEATURES: Reinforced-foil faced mass loaded vinyl noise barrier available in 1 lb. psf & 2 lb. psf Quilted fiberglass decoupler available in 1" thick and 2" thick Acoustical ratings STC 27 STC 34 Easy to cut and install Accepts matching lag tape Passes UL-94 and FMVSS 302 Class A flammability rated composite Roll size 54" x 30' USED FOR WRAPPING: Sheet Metal Ductwork Valves VAV Units Heat Exchangers Fans / Blowers Iron, Steel, and PVC Piping Our flexible material bends easily, wrapping around ducts and pipes Allows for easy installation around bends, elbows and corners ROLLS MEASURE 54" X 30' Foil faced loaded vinyl barrier is 54" wide Quilted fiberglass decoupler: Standard 54" wide Available in 48" width for 6" built-in overlap Outer reinforced-foil jacket Mass loaded vinyl noise barrier Quilted fiberglass decoupler This cutaway view shows the individual components of All Noise Control s ANC- WBV LAG/ANC-QFA-3 Which is a multi-layered flexible acoustical lagging material
3 OUTDOOR APPLICATIONS: ANC-WBV-9 installed on outdoor pipes at the Water Treatment Reclamation Facility in Gwinnett County Georgia ACOUSTICAL LAG GING Acoustical lagging materials are designed to reduce the transmission of radiated noise through the walls of ductwork or piping. REINFORCED-FOIL FACED NOISE BARRIER The loaded vinyl noise barrier combines mass and flexibility to reduce the transmission of noise from one area to another QUILTED FIBERGLASS DECOUPLER The Quilted Fiberglass Decoupler separates the noise barrier from the noise radiating surface for optimum noise reduction Western Mass Electric Company EASILY INSTALLED The reinforced-foil facing accepts a matching lag tape for easy installation The one step installation of the combination decoupler, noise barrier, and protective facing saves time and can substantially lower installation costs
4 OTHER ALL NOISE CONTROL PRODUCTS FOR ACOUSTICAL LAGGING BBC ACOUSTICAL COMPOSITE All Noise Control s BBC acoustical composite was used as an acoustical lagging on large diameter piping at a wastewater treatment facility. The durable reinforced barrier exterior combined with the quilted fiberglass decoupler offers maximum longevity as well as a 15 db (A) noise reduction. On the Cover - BSC SPECIALTY WRAP Custom panels manufactured from All Noise Control s BSC-25 acoustical composite material sped up the installation of acoustical lagging products at a petroleum processing facility. ALUMALAG All Noise Control s Alumalag products combine a 1 lb. psf loaded vinyl noise barrier with a protective aluminum jacketing. FEATURES: Aluminum available in a smooth, embossed, or corrugated finish in a variety of gauges Custom fabricated BBC acoustical jacket
5 ALL NOISE CONTROL ACOUSTICAL DUCT & PIPE LAGGING SPECIFICATION PIPE AND DUCT LAGGING ANC-WBV-3 Part 1 GENERAL 1.1 Summary A. This section includes the following: Part 2 PRODUCTS 1. Acoustical lagging as supplied by All Noise Control to wrap the exterior of ductwork and/or piping where indicated on plans and drawings 2.1 Acoustical pipe and duct lagging, General A. Acoustical pipe and duct lagging shall be a 1 lb. psf mass loaded vinyl noise barrier with a reinforced-foil facing on one side, bonded to a 1" thick non-woven porous scrim faced quilted fiberglass decoupler on the opposite side 1. Products I. Model # ANC-WBV-3 All Noise Control West Palm Beach, FL Ph: Fax: Quilted fiberglass decoupler: I. Shall be nominally 1" thick II. Shall have a nominal density of 2.0-lb/cu. ft. III. Shall be quilted with a non-woven porous scrim facing 3. Standard Width: 54 inches 4. Length: As indicated, up to 30 feet long 5. Flammability I. Class A flammability rated II. Flame Spread Index less than 15 III. Smoke Density less than Sound Transmission class: STC Acoustical Performance: Sound Transmission Loss: Per ASTM E 90 Octave Band Center Frequency (Hz) STC All Noise Control s pipe and duct lagging features a 1 lb. per sq. ft. or 2 lb. per sq. ft. mass loaded vinyl noise barrier with a reinforced-foil facing on one side. Commonly bonded to a 1 inch or 2 inch thick quilted fiberglass decoupler ANC-WBV (1 lb. barrier) ANC-WBV-3 (1 lb. barrier with 1" thick fiberglass decoupler) ANC-WBV/ANC-QFA-9 (1 lb. barrier with 2" thick fiberglass decoupler) ANC-WBV-2 LAG (2 lb. barrier) ANC-WBV-2 LAG/QFA-3 (2 lb. barrier with 1" thick fiberglass decoupler) ANC-WBV-2 LAG/ANC-QFA-9 (2 lb. barrier with 2" thick fiberglass decoupler) ACOUSTICAL DATA ANC-WBV SERIES Featuring a 1 lb. psf reinforced-foil faced noise barrier PRODUCT SOUND TRANSMISSION LOSS (db) FREQUENCY (Hz) STC ANC-WBV ANC-WBV ANC-WBV ANC-WBV-2 LAG SERIES Featuring a 2 lb. psf reinforced-foil faced noise barrier PRODUCT SOUND TRANSMISSION LOSS (db) FREQUENCY (Hz) STC ANC-WBV WBV-2/QFA WBV-2/QFA For 3-part specifications on all of our LAG products visit: 2.3 Accessories for securely mounting the Acoustical pipe and duct lagging 1. Foil lag tape 2. Stick pins 3. Welding pins 4. Bandin
Vinaflex Noise Barrier (VN)
Vinaflex Noise Barrier (VN) GLT Products Vinaflex (VN) Noise Barrier is a flexible, non-reinforced mass loaded vinyl that resists the passage of sound waves and reduces the transmission of airborne noise.
Vinaflex Noise Reduction Materials Insulation Innovation
www.gltproducts.com Vinaflex Noise Reduction Materials Insulation Innovation Contents Noise Barrier 1 Reinforced Rolls (RR) 2 Rolls with Foil Facing (FF) 2 Acoustic Foam Laminate (FB) 3 Fiberglass Absorber/Decoupler
Vinaflex Noise Reduction Materials Insulation Innovation
www.gltproducts.com Vinaflex Noise Reduction Materials Insulation Innovation Contents Vinaflex Noise Barrier 1 Reinforced Rolls (RR) 2 Rolls with Foil Facing (FF) 2 Acoustic Foam Laminate (FB) 3 Fiberglass
OEM ACOUSTICAL PRODUCTS
OEM ACOUSTICAL PRODUCTS Quilted Fiberglass Absorbers Noise Barrier & Quilted Fiberglass Absorber Composites Vibration Damping & Foam Composites QUILTED FIBERGLASS ABSORBERS Sound Seal quilted fiberglass
DSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION DUCT INSULATION
SECTION 230713 DUCT INSULATION PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 233113 Ductwork and Accessories 1.2 REFERENCES A. American Society for Testing and Materials (ASTM): 1. E84-96a Test Method
FIRE STATION 55 June 14, 2010
SECTION 15250 MECHANICAL INSULATION PART 1 - GENERAL 1.01 DESCRIPTION A. Work Includes 1. Insulation of Domestic Water Piping. 2. Pipe Insulation of refrigerant piping. 3. Insulation of ductwork. 4. Aluminum
A. This Section includes duct and plenum insulation; accessories and attachments; and sealing compounds.
SECTION 230713 DUCT INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION HVAC INSULATION
PART 1 GENERAL 1.1 SUMMARY SECTION 23 07 00 HVAC INSULATION A. Section Includes: 1. Ductwork insulation. 2. Duct liner. 3. Insulation jackets. 4. Equipment insulation 5. Piping system insulation. 6. Insulation
SECTION AIR DISTRIBUTION
SECTION 15880 AIR DISTRIBUTION PART 1 GENERAL 1.1 SUMMARY A. This section describes minimum requirements, products and methods of execution relating to the project air distribution systems. PART 2 PRODUCTS
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC INSULATION
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) PART 1 GENERAL 1.01 DESCRIPTION A. Insulate the following: 1. Piping: a. Heating water b. Chilled water c. Condenser water (outdoors with heat
SECTION DUCT INSULATION
SECTION 23 07 13 - DUCT INSULATION PART I - GENERAL 1.1 SECTION INCLUDES A. Ductwork Insulation B. Fan and Equipment Insulation C. Insulation Jackets D. Insulation Lagging 1.2 RELATED SECTIONS A. Section
PROJ. NO SECTION HVAC DUCT INSULATION
SECTION 23 07 13 HVAC DUCT INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Design & Construction Standards, Revised January
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
CertaPro Thermal FSK-25 Faced Batts
CertaPro Thermal FSK-25 Faced Batts ASTM C 553, Type I ASTM C 665, Type III, Class A, Category 1 New York City MEA 19-80-M Light-density fiber glass batts with a foil scrim kraft (FSK) fire resistant vapor
D. Provide UL-approved assemblies for pipes and ducts passing through fire-rated floors, walls, or partitions as required.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Noise-Foil Acoustic Metal Panels Sound Absorption Systems for Industry & Commerce
Noise-Foil Acoustic Metal Panels Sound Absorption Systems for Industry & Commerce Abuse resistant metal jacketed constructions Lab certified acoustic performances Suitable for interior and exterior installations
A. ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
NOISE CONTROL PRODUCTS AND SOLUTIONS Oil and Gas Operations
NOISE CONTROL PRODUCTS AND SOLUTIONS Oil and Gas Operations Environmental noise is a growing concern for communities due to the expansion of oil and gas operations into noise sensitive municipalities,
A. Product Data: Identify thermal conductivity, thickness, and jackets (both factory and field applied, if any), for each type of product indicated.
SECTION 23 07 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Acoustic Louvers ABSORPTIVE ACOUSTIC LOUVERS
ABSORPTIVE ACOUSTIC LOUVERS Developed to provide a solution to applications that require efficient ventilation without the transfer of undesirable noise, Price use acoustic media to absorb sound energy
SECTION VIBRATION AND SEISMIC CONTROL FOR PLUMBING
SECTION 22 05 48 VIBRATION AND SEISMIC CONTROL FOR PLUMBING PART 1 - GENERAL 1.1 SUMMARY A. Section includes inertia bases, vibration isolation, acoustic housings, and for plumbing equipment. 1.2 PERFORMANCE
This Design guideline contained herein includes the requirements for mechanical insulation at The University of Texas at Austin
PART 1: GENERAL 1.01 Purpose: This Design guideline contained herein includes the requirements for mechanical insulation at The University of Texas at Austin 1.02 Scope: A. Extent of mechanical insulation
Pressure Sensitive Tapes. for Insulation and General Purpose. Innovative Insulation Specialties. Abatement. Industrial. Packaging
Innovative Insulation Specialties Pressure Sensitive Tapes for Insulation and General Purpose Abatement Building & Construction Duct HVAC Industrial Jacketing Systems Masking Mechanical Closure Systems
Knauf Data Sheet AH-DS-5E Friendly Feel. Duct Wrap. with ECOSE Technology
Knauf Data Sheet AH-DS-5E 07-09 Friendly Feel with ECOSE Technology Duct Wrap For cooling, heating or dual temperature service. Friendly Feel Duct Wrap meets the most stringent IAQ tests GREENGUARD Children
A. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Friendly Feel Duct Wrap with KwikStretch Markings. Knauf Data Sheet AH-DS
Friendly Feel Duct Wrap with KwikStretch Markings Knauf Data Sheet AH-DS-5 05-07 For cooling, heating or dual temperature service. Friendly Feel Duct Wrap meets the most stringent IAQ tests GREENGUARD
SECTION PLUMBING INSULATION
SECTION 22 07 00 PLUMBING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section includes equipment insulation, covering, and thermal insulation for piping systems including vapor retarders, jackets and accessories.
SECTION (15081) - HVAC INSULATION
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: SECTION 23 07 00 (15081) - HVAC INSULATION 1. Insulation Materials 2. Jackets 3. Accessories and Attachments 4. Vapor Retarders B. Related Sections: 1.02
SECTION DUCTS PART 1 GENERAL 1.01 SUMMARY
1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 DUCTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Duct Materials.. Insulated flexible ducts.. Single wall spiral round ducts.. Ductwork fabrication.. Duct cleaning.
SECTION MECHANICAL INSULATION. A. Types of insulation specified in this section include the following:
SECTION 15250 PART I - GENERAL 1.01 WORK INCLUDED A. Types of insulation specified in this section include the following: 1. Piping System Insulation: a. Domestic Cold Water b. Domestic Hot water c. Heating
GUIDE SPECIFICATION: DUCT LINER
GUIDE SPECIFICATION: DUCT LINER This specification guide includes thermal & acoustical insulation for ductwork and air handling systems. This section is based on the format recommended by MICA (Midwest
SECTION SOUND-ABSORPTIVE PANELS
SECTION 09 77 23 SOUND-ABSORPTIVE PANELS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 General Requirements apply. 1.2 SECTION INCLUDES
Addendum to Specifications
Addendum to Specifications SOW #: Construction Specification #: Date: Additions to Specifications: Deletions to Specifications: Engineer Date Design Engineering Manager Date Page 2 of 7 PART 1 - GENERAL
SECTION HVAC DUCTS AND CASINGS
SECTION 23 31 00 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Ductwork, Joints and Fittings 2. Type I, Grease Hood Ductwork 3. Type II, Vapor Hood Ductwork 4. Laundry Clothes Dryer Vent 5. Insulated
Pressure Sensitive Tapes for Industrial Insulation and General Purpose
www.gltproducts.com Pressure Sensitive Tapes for Industrial Insulation and General Purpose Insulation Innovation Abatement Industrial Packaging Building & Construction Duct HVAC Jacketing Systems Masking
Foil-Faced Fiberglass Fabric 84215/9480 HT
Foil-Faced Fiberglass Fabric 84215/9480 HT Description Foil-Faced Fiberglass Fabric 84215/9480 HT has been specifically designed as shipboard lagging and jacketing material for use over insulation where
ACOUSTICAL INSULATION (LAGGING) FOR PIPING AND EQUIPMENT
ACOUSTICAL INSULATION (LAGGING) FOR PIPING AND EQUIPMENT Specification for Acoustical Insulation (Lagging) for Piping and Equipment 1 of 5 TABLE OF CONTENTS 1.0SCOPE..... 3 2.0REFERENCED PUBLICATIONS...
PRESTON HEALTH SERVICES ARCHITECT S NO. 2700
SECTION 23 0700 - HVAC INSULATION PART 1 - GENERAL 1.1 DESCRIPTION OF WORK: A. All work covered in this section consists of furnishing all labor, equipment, materials and accessories, and performing all
University of Houston Master Construction Specifications Insert Project Name
SECTION 23 07 00 - SYSTEM INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section 23 01 00, "Mechanical
Soundlag 4525C Information Page. Acoustic Pipe Wrap 411 IP 04/10 FEATURES APPLICATIONS BENEFITS
411 IP 04/10 Soundlag 4525C Information Page Acoustic Pipe Wrap FEATURES Reduces the noise in hydraulic and waste pipes by up to 25dB(A) Broad operating temperature range Four zero rating to AS 1530.3
Floor Insulation Underlayment Section Sound Control Matting
Floor Insulation Underlayment Section 09618 Sound Control Matting Part I General 1.1 Summary A. Section includes a sound control material for achieving an STC and IIC rating in excess of 50 to meet building
TRICON DOUBLE-CON PLUS
TRICON DOUBLE-CON PLUS System Specifications Iron Pipe Size Steel Conduit O.D. Steel Conduit Wall Outer Insulation (IN)* Alum./Stainless/Galv. Jacket O.D. (IN) Metal Jacket Wall Thickness 1 4.50.120 1.75
ACOUSTIC BARRIERS DWX SERIES FOR DUCTWORK
DWX SERIES ACOUSTIC BARRIERS FOR DUCTWORK A SOFT FLEXIBLE QUILT WITH AN OUTER HEAVY POLYMERIC ACOUSTIC MEMBRANE, OFFERING EXCELLENT DURABILITY AND SOUND INSULATION QUALITIES, THAT CAN BE USED IN A VARIETY
KwikFlex Pipe & Tank Insulation. Knauf Data Sheet PE-DS
KwikFlex Pipe & Tank Insulation Knauf Data Sheet PE-DS-15 04-07 Knauf KwikFlex offers a unique combination of fl exibility and compressive strength in a blanket form. Tough and durable, yet easy to handle
SECTION MULTI-USE COMPOSITE ALUMINUM PANELS
SECTION 07416 MULTI-USE COMPOSITE ALUMINUM PANELS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
K. All mechanical rooms shall be designed with a minimum 3-1/2 dropped floor.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Hospitals Soundproofing. Hospital Soundproofing & Soundproofing Solutions
Hospitals Soundproofing Hospital Soundproofing & Soundproofing Solutions Hospital Soundproofing Clean room environments impose sanitation constraints diametrically opposed to the basic construction of
Air Handling Products
Full Line Catalog AH-FL-11 05-07 Air Handling Products Air Duct Board-M and AGM, Duct Liner E M, Textile Duct Liner, Rigid Plenum Liner and Duct Wrap A Full Line of Air Handling Products Delivering greater
Eclipse TM Air Duct Board. Knauf Data Sheet AH-DS
Eclipse TM Air Duct Board Knauf Data Sheet AH-DS-10 01-08 Eclipse Air Duct Board Description Knauf Eclipse Air Duct Board is a rigid fiber glass board faced on one side with a foil-scrim-kraft (FSK) vapor
ENKASONIC FLOOR UNDERLAYMENT 9110
ENKASONIC FLOOR UNDERLAYMENT 9110 GS1197 Section 13080 SECTION 09618 SOUND CONTROL MATTING Part I General 1.1 Summary A. Section includes a sound control material for achieving an STC and IIC rating in
1. Division 23 Section "Hangers and Supports for HVAC Piping and Equipment" for pipe insulation shields and protection saddles.
SECTION 23 07 19 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
University of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 23 07 00_ HVAC INSULATION PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Piping system insulation. 2. Equipment insulation. 3.
A. Section Fire Procection, HVAC & Plumbing Penetration Firestopping. B. Section Interior Painting: Painting insulation jacket.
SECTION 230719 - HVAC PIPING INSULATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Piping insulation. B. Jackets and accessories. 1.2 RELATED REQUIREMENTS A. Section 07813 - Fire Procection, HVAC & Plumbing
INSULATION SECTION 15250
INSULATION SECTION 15250 PART 1 GENERAL 1.1 DESCRIPTION A. Provide complete systems of insulation for piping, ducts, boiler stacks and breeching, and mechanical equipment as specified. B. Related work
TLRD. Thin Line Return Dissipater
TLRD Typical Applications Price s provide an attractive and effective solution to mechanical and air transfer noise. Its slim design makes it an excellent alternative to standard transfer grilles and is
PRESTON HEALTH SERVICES ARCHITECT S NO. 2700
SECTION 22 0700 - PLUMBING INSULATION PART 1 - GENERAL 1.1 DESCRIPTION OF WORK: A. All work covered in this section consists of furnishing all labor, equipment, materials and accessories, and performing
KOMBI PVA KOMBI PVA 1 CC
KOMBI PVA ** Radius of bend Max. supply pressure *D= Ø internal nominal Flame retardant (categoria II) - 10 C +120 C 0 Pa PVC/ALUMINIUM combined flexible duct that combines the high mechanical resistance
FIRM-FILL SCM-400 can be installed under a FIRM-FILL Gypsum Concrete Floor Underlayment to produce an exceptional vibration isolation floor system.
Specify FILL SCM-400 for additional impact noise control when a thicker sound mat is needed. It helps achieve higher delta numbers than thinner mats. FILL SCM-400 is a cost-effective way to address Impact
B C M T e c h n i c a l, L L C A v o n I n d u s t r i a l D r. R o c h e s t e r H i l l s, M I P h o n e : T o l
P r o d u c t C a t a l o g w w w. p i p e i n s u l a t i o n. n e t B C M T e c h n i c a l, L L C 2 1 7 5 A v o n I n d u s t r i a l D r. R o c h e s t e r H i l l s, M I 4 8 3 0 9 P h o n e : 2 4
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required. A. Section Mechanical Insulation.
SECTION 15083 HVAC DUCT PROTECTION OVER INSULATION FlexClad This section is based on the products of MFM Building Products Corp., which is located at: 525 Orange St. P. O. Box 340 Coshocton, OH 43812 Toll
ADC. The Greenbook of Flex. Flexible Duct Performance & Installation Standards (5 th Edition) Characteristics of flexible duct
ADC Flexible Duct Performance & Installation Standards (5 th Edition) The Greenbook of Flex Provides information about Characteristics of flexible duct Testing, Listing, Reporting, and Certifying Installation
SECTION PLUMBING PIPING SYSTEM
SECTION 15410 - PLUMBING PIPING SYSTEM PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, are a part of this Section. 1.02 SUMMARY
FyreWrap Elite 1.5 Duct Insulation Air Distribution System (ADS Ducts)
Product Information Sheet FyreWrap Elite 1.5 Duct Insulation Air Distribution System (ADS Ducts) Introduction Unifrax s FyreWrap Elite 1.5 Duct Insulation is a singlelayer flexible duct wrap enclosure
AIR DISTRIBUTION SOLUTIONS QUIETR ECOTOUCH SOFTR PROCAT
AIR DISTRIBUTION SOLUTIONS QUIETR ECOTOUCH SOFTR PROCAT Owens Corning Air Distribution Solutions 3 EcoTouch Insulation for Flexible Duct 4 QuietR Duct Board 5 ProCat Blown-in Insulation System 6 QuietR
ARCHITECTURAL ACOUSTICAL WALL & CEILING PRODUCTS
ARCHITECTURAL ACOUSTICAL WALL & CEILING PRODUCTS ALL NOISE CONTROL Solving a customer s problem is the motivation behind everything we do in the Sound Quality Division of ANC. In addition to our extensive
AFA-801. Acoustical Louver Airfoil Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Acoustical Louver Airfoil Blade is an acoustical weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates airfoil style
Intertek Testing Services
Acoustical 3933 U.S. Rt. Cortland, NY 13045 Phone: 607-753-6711 Fax: 607-756-9891 Order No. J99031102-003 December 10, 1999 REPORT NO. J99031102-003 SOUND TRANSMISSION LOSS TEST AND CLASSIFICATION OF A
SOUND BARRIER WALLS. Specializing in Acoustics, Noise & Vibration Control. Phone Fax Penn Street Westfield, IN 46074
SOUND BARRIER WALLS Specializing in Acoustics, Noise & Vibration Control 129 Penn Street Westfield, IN 46074 Phone Fax 317-774-1911 www.enoisecontrol.com info@enoisecontrol.com Barrier Wall Systems Industrial,
Office Soundproofing. Office Soundproofing & Soundproofing Solutions
Office Soundproofing Office Soundproofing & Soundproofing Solutions Office Soundproofing Proper office design will factor in the sound levels within the office space and determine where office noise control
SECTION PLUMBING EQUIPMENT INSULATION Updated 8/2018
SECTION 220716 - PLUMBING EQUIPMENT INSULATION Updated 8/2018 This Section may be edited and revised by inserting or deleting text to meet requirements specific to your project. The Document is provided
SECTION / / BULLET RESISTANT SOUND CONTROL WINDOWS
SECTION 08381 / 088856 / 085673 BULLET RESISTANT SOUND CONTROL WINDOWS 1.0 GENERAL 1.1 DESCRIPTION OF WORK A. Furnish and install FACTORY PREGLAZED Bullet Resistant Sound Control Windows specified herein
1. ARI 410 Standard for chilled water, hot water and steam coils. 2. ARI 430 Central Station Air Handling Units
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Division 15 INSULATION Section 15100
Page 1 of 5 SECTION PAGE PART 1 GENERAL 2 1.1 General 2 1.2 References 2 1.3 Work Included 2 1.4 Related Work 2 1.5 Quality Assurance 3 PART 2 PRODUCTS 3 2.1 Description 3 PART 3 EXECUTION 3 3.1 Workmanship
mass-loaded vinyl noise barrier composite SOUNDLAG SOUNDPROOFING SOLUTIONS FOR ALL INDUSTRIES pyroteknc.com
mass-loaded vinyl noise barrier composite SOUNDLAG TM SOUNDPROOFING SOLUTIONS FOR ALL INDUSTRIES pyroteknc.com Acoustic treatment for noisy pipes The trend towards high-density living and lightweight building
AFJ-601. Acoustical Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Acoustical Louver J Blade is an acoustical weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style insulated acoustical
Pipe & Equipment Insulations Product Selection Guide
Fiber Glass Insulation Pipe & Equipment Insulations Product Selection Guide Icon Key Thermal Acoustical Fire Resistance Moisture Control Formaldehyde-free products for improved indoor air quality For more
TENOCHCA HALL - PROJECT NO FAN COIL UNITS, RESTROOM AND FINISH RENOVATION
SECTION 230719 - PART 1 - GENERAL 1.1 SUMMARY A. Section includes insulating the following HVAC piping systems: 1. Chilled-water and brine piping, [indoors] [and] [outdoors]. 2. Heating hot-water piping,
K-FLEX DUCT LINER GRAY
K-FLEX DUCT LINER GRAY Flexible, Closed Cell Elastomeric Foam Insulation Responsive to Market Industry & Product Expertise 3rd Party Certified Products 25/50-rated up to 2 thick Systems Approach Factory-applied
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section PIPE AND EQUIPMENT INSULATION
PART 1 GENERAL 1.01 SUMMARY Section 15145 This Section includes insulation for piping and equipment as called out on the Plans. 1.02 MEASUREMENT AND PAYMENT No separate payment will be provided for the
PITTWRAP CF JACKETING Product Datasheet
PITTWRAP CF JACKETING Product Datasheet 1. Description and Area of Application PITTWRAP CF jacketing is a cellulose free fiberglass reinforced vapor retarder insulation jacketing, used for protecting above
B. Refer to Section : Air Distribution for lined ductwork requirements.
SECTION 230700 MECHANICAL INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
5. AMCA 301 Method of Publishing Sound Ratings for Air Moving Devices. 6. AMCA 500 Test Methods for Louver, Dampers, and Shutters
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Acoustical Surfaces, Inc.
Acoustical Natural Cotton Fiber Insulation Acoustical PERFORMANCE ACOUSTIC (www.acousticalsurfaces.com) Controlling sound and noise transmission through walls, ceilings, and floors can be a complex challenge
SECTION HVAC DUCTS AND CASINGS
SECTION 23 31 00 HVAC DUCTS AND CASINGS PART 1 -GENERAL 1.1 SUMMARY A. Section includes metal ductwork, nonmetallic ductwork, casing and plenums, buried ductwork, kitchen hood ductwork, duct cleaning.
SECTION HVAC INSULATION
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. B. Related
Product Information Sheet
Product Information Sheet FyreWrap Elite 1.5 Duct Insulation Air Distribution System (ADS Ducts) Introduction Unifrax s FyreWrap Elite 1.5 Duct Insulation is a singlelayer flexible duct wrap enclosure
Air Duct Board-M with Hydroshield Technology. Knauf Data Sheet AH-DS
Air Duct Board-M with Hydroshield Technology Knauf Data Sheet AH-DS-6 08-06 Knauf Air Duct Board-M is faced with a tightly bonded black mat for greater airstream surface durability. Available in both EI-475
TECHWRAP2 AND TECHTUBE Acoustic solutions for pipework and equipment
TECHWRAP2 AND TECHTUBE Acoustic solutions for pipework and equipment TECHWRAP2 AND TECHTUBE Techwrap 2 and Techtube are high performance acoustic solutions for pipes and equipment. ROCKWOOL Techwrap2 and
FlexClad Duct and Pipe Sealing System
FlexClad Duct and Pipe Sealing System Proven Performance Outperforms Metal Jacketing Waterproof & Weather-Resistant Ideal For Indoor & Outdoor Applications Quick & Easy Self-Stick Installation Meets 25/50
IAC Acoustics Moduline Noise Control Enclosures. Mark Simnick
IAC Acoustics Moduline Noise Control Enclosures by Mark Simnick Mid-South Product Sales Manager IAC Acoustics, A Division of Sound Seal 401 Airport Road North Aurora, IL 60542 Mobile: (630) 235-2566 Office:
PERMATHERM PIPE INSULATION PRODUCTS
PERMATHERM PIPE INSULATION PRODUCTS PERMATHERM, INC. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.pipe-insulation.net September 2012 This Specification Guideline in the 3-Part Format
1 of 17. PO Box Bellevue Rd, Newark, DE V F
1 of 17 Raw Material Manufactured from 4 8-foot sheets Fiber-reinforced 1-mil aluminumfaced polyisocyanurate panels 0.032 embossed aluminum Other patterns and stainless steel are available Necessary supplies
PRODUCT CATALOGUE PROFLEXR. Thermal Insulation. CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment
PRODUCT CATALOGUE PROFLEXR Thermal Insulation CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment PROFLEX Proflex polyolefin foam thermal insulation for AirConditioning,
BARRIER. GreenLAG. acoustic pipe lagging. acoustica.com.au
BARRIER GreenLAG acoustic pipe lagging acoustica.com.au GreenLAG acoustic pipe lagging GreenLAG pipe lagging was developed to contain the intrusive noise generated by the turbulent flow of liquids through
Insulation Board. Knauf Data Sheet PE-DS
Insulation Board Knauf Data Sheet PE-DS-2 12-06 Insulation Board Description Knauf Insulation Board is a thermal and acoustical insulation product made from inorganic glass fibers preformed into boards
PERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION
PermaTherm, Inc. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.insulatepipe.com PERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION The specification guideline in the three-part
Industries. Modular Acoustical Panels (sound barrier panels) Acoustical Modular Panels, provide a cost-effective solution to most
IMI Innovative IMI Acoustics Metal Corporation Industries, Inc. Modular Acoustical Panels (sound barrier panels) manufactured by IMI Innovative Acoustics Metal Corporation, Industries, provide a cost-effective