RIB-ROOF System Details. Planning and Building with RIB-ROOF Metal Roofing Systems
|
|
- Janis Tate
- 6 years ago
- Views:
Transcription
1 System Details Planning and Building with Metal Roofing Systems
2 Metal Roofing Systems Zambelli A Tradition of Innovation The success of Zambelli had its origins in quality, competence and the spirit of innovation. Since our beginning we have been continually putting product novelties in the metal processing sector onto the market. We accomplish this by constantly investing in the advancement of production processes, in the research of new technologies and in the optimization of our products. Details for Planning Our metal roofing system is installed with system-specific sliding clips without penetration of the roofing material. This metal roofing system offers manifold areas of application, ranging from backventilated cold roofs to thermal insulated nonventilated roofs. profile sheets are available in the construction widths 465 and 500 mm (special widths: 400 and 333 mm) in different material thicknesses. They are produced in the materials steel, aluminium, titanium zinc and copper and can also be delivered in curved or conical design. Apart from our range of standard products we are also offering supplementary system accessories like snow fence devices, solar module transports, roofstep holders and harness security systems. You can fully trust in Zambelli products, since their high manufacturing quality and precision are able to meet even the highest demands, a fact which is also documented in the ISO-certification. In 1999, Zambelli was awarded the East Bavarian Technology Transfer Prize for its innovative force and environmental consciousness we have eliminated pollution intensive work processes in the interest of the environment, use non-polluting materials and have voluntarily joined the Umweltpakt Bayern. Being fully-developed, the systems from Zambelli offer numerous advantages in the planning and installing phases, and also enables you to realize extraordinary designs. This brochure gives you ideas by providing a great number of detailed colour illustrations and explicit technical drawings. You will be able to integrate the RIB- ROOF system into your project professionally and creatively as well as safely and quickly. All technical drawings are license-free for your use. On request we will be glad to send you the data by . For further details, please see our Practical Guide. Should you have any questions about our products, services and prices, please do not hesitate to contact us. Please phone (export ), (phone central), send your fax enquiries to and s to rib-roof@zambelli.de. Contents Introduction, contents 1 Wall joints 17 Rib-Roof the system Range of products and accessories Rib-Roof speed 500 Rib-Roof Eaves Attached gutters/projecting eaves Terraced gradients/ Eaves security against wind suction Roof construction Curved, conical, and conical curved Roof construction / Installation on full surface support with clip guide Roof renovation Flat roof renovation with new wood roof structure Roof renovation on fibre cement boards Ridge Arris Verge Zambelli System Details Inside gutters/parapet gutters Valleys Roof penetrations Round roof penetrations Domelight curbs Continuous roof lighting Rectangular roof penetrations System accessories Snow fence devices, solar module transports, tread holders and harness security systems
3 the System Speed 500 Range of Products and Accessories Profile sheet standard construction width 500mm Profile sheet special construction width 400mm Profile sheet special construction width 333mm Standard sliding clip border bar Curved profile sheet Turned clip Conical profile sheet Closure Profile filler upper side Ridge cap Ventilation ridge ccap Verge insert profile Verge cover Lock plate Gutter inlet sheet Eaves blind Ventilation Closure Profile filler underside Eaves angle Snow fence pipe, pipe connector Clamping plate Ice stopper Mounted bracket for solar module / lightning conductor Fastening angle Tread holder Coil Special edge parts Curb Tools Harness security system 465 Range of Products and Accessories Profile sheet Curved profile sheet Standard sliding Start clip End clip Anchor point clip Diagonal clip Closure Profile filler upper side Ridge cap Ventilation ridge cap Verge insert profile Verge cover Lock plate Gutter inlet sheet Eaves blind Ventilation closure Profile filler for underside Eaves angle Snow fence pipe Clamping plate Ice stopper Pipe connector Mounted bracket for solar module / lightning conductor Fastening angle Tread holder Coil Special edge parts Curb Tools Harness security system Zambelli System Details 2
4 Speed Standard Speed 500 Quality: aluzinc t=1,30mm stainless steel t=1,20mm copper t=1,30mm border Speed 500 profiled or flat (overall length 3m) Standard- and profile sheet Speed 500 on wooden lathing standard construction width 500mm, special widths e.g. 333 mm, 400 mm. 1. Place the first row of clips Building inspection licence Nr. Z (steel), Nr. Z (aluminium) Non-penetrative installation on sliding clips or clip border no perforation of the water-carrying plane, optimal dilatation ability for large roof surfaces 2. Insert the first profile sheet Accessible and self-supporting thus suitable for all standard fields of application on purlins or full suface support from the single-shelled rear ventilated roof to the thermally insulated unventilated roof structure Ultimate in easy, quick installation even at low temperatures no pre-assembly of the sliding clips and no mechanical beading of the profile sheets required 3. Place the next row of clips No transverse joints due to virtually unlimited length profile sheets up to 32m length are transported by lorry (europe), longer sheets are profiled on-site with mobile roll-forming equipment. Projects in overseas with on-site profiling available on request. May be used from 1.5 pitch upwards Standard construction width 500 mm other overall widths on request 2. Insert the next profile sheet Conical and conical curved profile sheets Curved profile sheets from a radius of 2m on smaller radii on request 3 Zambelli System Details Full range of accessories, wide range of materials and colours Profile sheets available with prefabricated eaves side beading or ridge side bending of the bottom chord
5 465 the System Start clip system 465 Quality: aluzinc t=1.30mm stainless steell t=1.20mm copper t=1.30mm Standard sliding clip 465 Standard and profile sheet 465 on wooden lathing Building inspection licence Nr. Z (steel), Nr. Z (aluminium) Installation on sliding clips or clip border without penetration no perforation of the water-carrying plane, optimal dilatation ability for large roof surfaces Accessible and self-supporting thus suitable for all standard fields of application on purlins or full surface support, from single-leaf, rear ventilated roofs to thermally insulated, non-ventilated roof structures Ultimate in easy, quick installation even at low temperatures no pre-insatllation of sliding clips and no mechanical beading of the profile sheets required No transverse joints due to virtually unlimited length profile sheets up to 32m length are transported by lorry (Europe), longer sheets are profiled on-site with mobile roll-forming equipment. Projects in overseas with on-site profiling available on request. May be used from 1.5 pitch upwards Conical profile sheets (on request) Curved profile sheets from a radius of 6m upwards (smaller radii on request), alternative rounding by bending Full range of accessories, wide range of materials and colours Profile sheets available with prefabricated eaves side beading or ridge side bending of the bottom chord 1. Place the first row of clips 2. Insert the first profile sheet 3. Place the next row of clips 2. Insert the next profile sheet Zambelli System Details 4
6 Minimum bending radii The following minimum bending radii must be taken into consideration for mechanical cambering; they depend on the type of material and thickness [t]: Speed 500 Convexe profile sheets Material Material thickness t [mm] Radius [m] Steel Aluminium Aluminium 0, oder Aluminium 0, Titanium zinc 1.00 on demand Copper 0.60 on demand 465 Convexe profile sheets Material Material thickness t [mm] Radius [m] Steel Aluminium Aluminium 0.80 or Aluminium Titanium zinc 1.00 on demand Copper 0.60 on demand 5 Zambelli System Details Curved roof
7 Roof Construction The Variety of Shapes Curved, conical and conical curved Conical profile sheet Speed 500 We also deliver profile sheets in curved (convex or concave), conical, and conical-curved design. Arches with large radii can be executed with straight profile sheets, profile sheets for smaller radii are pre-fabricated or roll formed with mobile plants on site. 465 in extremely small radii requires a round bent execution of the profile sheets. Curved Speed 500 profile sheets with small radii are fixed with turned clips. For conical designs, Speed 500 profile sheets can be used in different construction widths. Curved profile sheet Speed 500, turned clip See also our Practical Guide for Planning and Installing chapter Conical/curved/conical curved profile sheets. Curved roof roof construction with wooden lateral and counter lathing Possible for r>8,0m when wooden lateral and counter lathing is used curved Thermal insulation with intervening lateral and counter lathing Trapezoidal sheet metal Truss Radii from r>4m on are possible when wooden lateral lathing or a metallic Z-profile or a domed profile is used. Smaller radii on request. Zambelli System Details 6
8 Roof construction with roof boarding Roof construction with porous concrete Roof construction with reinforced concrete ceiling Energy saving with wooden lathing According to an examination report of FIW of 11 April 2005 you save about 1300, per year per 1000 m 2 roof surface if you use a distance construction of wooden lathing instead of a construction with metallic Z-profile. Compared to metallic holders penetrating the thermal insulation, the energy saving is about 540, for the same surface. 7 Zambelli System Details Installation on wooden lathing Installation on metallic Z-profile
9 Roof construction For every roof structure the right solution! Roof construction For the metal roofing system all common substructures are possible as roof structure: trapezoidal profiles, wood binding rafters, wood boarding (t=24 mm), steel rafters, lightweight concrete or reinforced concrete. A variant to the full-surface lathing is high compressive mineral wool. An alternative to this method is offered by the high compressive mineral wool. The installation of profile sheets is executed on spacers which correspond to the thickness of the insulation, or on pressure distribution profiles or clip borders directly in the load-bearing structure. Installation on full-surface support with clip border Speed 500 may alternatively be installed on full-surface supports. A variation in addition to the roof boarding is the high compressive strength mineral wool with high density top layer which improves the resistance to site work (application type DAA-dm according to DIN V : thermal insulation). Gutter entry flashing Gutter Eaves cover sheet Edge reinforcement Trapezoidal profile Single layer thermal insulation Eaves plank Roof construction with trapezoidal profile Diagonal clip Wood boarding laid diagonally Thermal insulation Wood truss End angle flashing Masonry Roof construction with roof boarding, porous concrete, and reinforced concrete ceiling Separation layer Wood boarding Rafters Installation of the profile sheets may either be done on distance profiles which correspond to the thickness of the thermal insulation or on the clip border structure profiled or flat which is fastened directly onto the support structure. It is important to avoid gaps when laying the insulation boards. This finish is also transferable to 465 if so-called pressure distribution profiles are used. Lightweight concrete Pressure distribution strip High compressive thermal insulation Installation on high-compressive mineral wool Concrete contraction roof Transverse lathing Single layer high compressive thermal insulation Zambelli System Details 8
10 9 Zambelli System Details Flat roof renovation with new wooden roof structure
11 Roof renovation Flat roof renovation with new wooden roof structure Even for renovating flat roofs, the metal roofing system offers outstanding possibilities. No limits are set to the architectural freedom: by installing profile sheets with the corresponding minimum roof slope on a new wood roof structure or on a steel roof structure, defect and unattractive flatroofs can be renovated, appearances improved and greater longevity achieved. The ventilation of the roof area can be done either with cross-ventilation on the gables or with ventilation openings at the eaves and at the ridge (e.g. ventilation ridge). Flat roof renovation with new wooden roof structure Bonding strip Gutter inlet sheet Gutter Separation layer Wooden lathing Wooden roof structure Closure Anchor points Fastening brackets Ridge cap Perforated panel Existing conditions: existing sealant thermal insulation Roof renovation on fibre cement boards For roof renovation on existing fibre cement boards you receive project-related solutions. In this example, L- angles (short pieces) with elongated holes are used which are installed onto the fixing screws of the existing fibre cement boards. Z-shaped profiles are fixed on the L-angles as substructure for the sliding clips. In Germany, the planned renovation type have to be approved by the local trade supervisory office; outside Germany the specific needs have to be checked. Ice stopper Snow fence pipe Ø 32mm Clamping plate Existing fibre cement boards L-corner (short pieces) Existing fixing screw Z-profile Roof renovation on fibre cement boards Existing fibre cement boards Wood boarding Thermal insulation aluzinc 465 Eaves blind Gutter inlet sheet Gutter and gutter hooks L-corner (short pieces) Rafters Facade Zambelli System Details 10
12 11 Zambelli System Details Penthouse roof ridge cap
13 Ridge Ridge covering Single pitch roof ridge The penthouse ridge forms a design and installationtechnical unit with the corresponding verge. The penthouse ridge can also be installed to a vertical wall (see also wall joints ridge side with, and without, ventilation opening). Transverse and counter lathing The close couple roof cap without ventilation opening is first inserted into the closure with its double sided back edge folds, and subsequently, the fold is pressed together. The close couple roof cap with ventilation opening is supplied as standard equipment in flat, aerodynamic optimal design (structure height 80 mm) with opening ventilation cross section of 450cm2/m. It is usually installed with profile fillers to prevent the penetration of driving snow or the suction of undesirable air. On request we are also able to deliver a higher one (structure height 170mm). See also the chapter Ridge in our Practical Guide for Planning and Installing. Acoustic trapezoidal profile Edge reinforcement Noise insulation layer with dizzle protection Steel truss Close couple roof without ventilation Double layer compressed thermal insulation Transverse and counter lathing Anchor point Ridge cap -bottom chord at the height of the ribs Closure Ridge flashing Trapezoidal profile sheet Steel truss Ventilation ridge structure height 80 mm Close couple roof with ventilation opening Zambelli System Details 12
14 13 Zambelli System Details Arris cap
15 Arris Arris cap Arris areas are executed similar to close couple roof ridges. By marking the cutouts for the profile sheet ribs (high increase) to the closure and cutting them by using a sheet metal cutter on site, an optimal fit is attained. In principle, the construction details for the ridge cap can be applied in this case. See also the chapter Arris in our Practical Guide for Planning and Installing. Pressure distribution profile strip High compressive thermal insulation Arris cap Anchor point Ridge insertion profile Arris cap Ridge flashing Trapezoidal profile sheet Arris binding rafter with angle iron support Ventilated arris cap analogous to the ventilation ridge The ventilated arris cap can also be executed with a ventilation closure Arris cap, ventilated Ventilation closure Profile filler for arris Carrying construction (e.g. wood rafter) Zambelli System Details 14
16 15 Zambelli System Details Verge projection on steel sword
17 Verge Verge projection on steel sword Verge projection on trapezoidal profile Trapezoidal profile Transverse and counter lathing Double layer thermal insulation Verge cover Verge insertion profile Verge covering Verge insertion profile Verge plank Double layer thermal insulation Transverse and counter lathing Edge angle Insertion profile Joint flashing Double clip Verge covering Verge insertion profile Projection flashing Steel pan wall with thermal insulation Facade profile Profile filler Thermal insulation Steel sword Steel beam Insertion flashing Edge angle Profile filler Cover profile sheet Facade profile Steel pan wall Trapezoidal profile Profile filler Crease filler Reinforced concrete truss Support Verge projection The system-specific verge insertion profile sheet, supplied as a standard product in the metal roofing range, enables you to architecturally optimize all verge building elements optically and technically. The individual adaptation is executed manually using the verge cover. For verge projections with trapezoidal sheets as substructure, trapezoidal profile filler is used for appearance and thermal-technical purposes. See also the chapter Verge in our Practical Guide for Planning and Installing. Verge projection on trapezoidal profile sheet Zambelli System Details 16
18 17 Zambelli System Details Side and ridge wall joint
19 Wall joint Side wall joint Roof parapet joint Sealant strip Flat pan Join vapour barrier closely Wood plank Wall joint flashing Insertion profile sheet Single layer thermal insulation Z-profile (diagonal) Thermal separation Thermal insulation Transverse lathing Insertion profile sheet Projection flashing Wood plank Separation layer Parapet flashing Closure Edge reinforcement Trapezoidal flashing sheet Steel binding rafter Existing corrugated sheet Truss Steel binding rafter Side and ridge wall joint/ Roof parapet joint For joints to masonry walls and stucco surfaces, an overlap strip must be cut into the wall, which is backed with a sealant strip or non-hardening sealing compound, and pressed into the joint using clamps. The overlap strip must be worked into the masonry before stucco operations. When forming joints between a penthouse roof and a vertical wall, a closure is used. The side wall joint to the masonry wall is executed using the verge (insertion) profile strip. In principle, the details applicable to the verge also have validity for this work. The wall joint can be completed under certain structural conditions with a ridge-side roof parapet cover. In this case the overlap strip will not be required. See also the chapter Wall joints in our Practical Guide for Planning and Installing. Roof parapet joint Zambelli System Details 18
20 19 Zambelli System Details Self-supporting projecting eaves structure
21 Eaves Thermal insulation Wood boarding Gutter inlet sheet Self-supporting projecting eaves structure Double layer of compressed thermal insulation Separation layer Transverse lathing/ Counter lathing Fascia Gutter inlet sheet Halfround gutter Eaves structure with attached gutter (the solution for TiZi is ventilated) Transverse lathing Extended rafters Luft Perforated sheet Insertion flashing Eaves rafters Eaves cross member Facade Trapezoidal profile Edge reinforcement Reinforced concrete truss Trapezoidal profile Counter lathing with thermal insulation Steel beam Edge angle Attached gutter Self-supporting projecting eaves Outside attached half-round or box-shaped gutters which are attached using hangers to the fascia are the most simple eaves-type design. System integrated profile fillers can be installed in the eaves area: this is, however, only required in exceptional cases. The joint of the roof to the gutter is executed using eaves flashing (gutter entry flashing). The vapour diffusion open protective layer or other separation layers cover the eaves flashing to drain off secondary condensation into the gutter which may be formed. For the profile sheet Speed 500, a system-related eaves angle is installed which is not required for the profile 465. For eaves structures with self-supporting projections, a roof overhang using the necessary substructures (e.g. eaves rafters) is produced. For ventilated roof designs with attached gutters, ventilation openings below the eaves are necessary. See also the chapter Eaves area in our Practical Guide for Planning and Installing. Eaves structure with attached gutter solution with ventilation if titanium zinc is used Zambelli System Details 20
22 21 Zambelli System Details Eaves structure with sloped steps
23 Eaves Eaves structure with sloped steps Eaves safety against wind uplift force Wood plank Flashing Gutter Gutter inlet sheet Double standing seam covering Double layer compressed thermal insulation Transverse and counter lathing Eaves plank Gutter inlet sheet Wind uplift security with overlapping fold Z Gutter Transverse lathing Rafter Separation layer Wood boarding Steel sword T-shaped steel element Steel pan wall with thermal insulation Facade profile Trapezoidal profile Steel beam Profile filler Detail Z: Wind uplift security Through overlapping fold Riveted Sloped steps Eaves safety against wind uplift force Eaves structures with sloped steps are used as design elements in architecture, or for extremely long profile sheets. In principle, the details of execution are the same as for the penthouse roof joints to vertical walls. The eaves safety against wind uplift force at the eaves is executed by overlapping folds corresponding to detail Z with rivet. See also the chapter Sloped Steps in our Practical Guide for Planning and Installing. Eaves stucture with box-shaped gutter Zambelli System Details 22
24 23 Zambelli System Details Inside gutter with safety gutter and two-piece gutter leader head with conical entry
25 Gutter Innenliegende Rinne Parapet gutter Transverse and counter lathing Double layer compressed thermal insulation Water conducting gutter High compressive mineral wool Safety gutter Gutter inlet sheet Holder for sliding attachment Wood plank Projection flashing Roof parapet wood plank Separation layer Parapet flashing Wall coping Water conducting gutter High-compressive mineral wool Load-bearing safety gutter Gutter heating Gutter inlet sheet Double layer Thermal insulation Transverse and counter lathing Trapezoidal profile sheet Edge reinforcement Trapezoidal sheet Reinforced concrete truss Gutter outlet soldered with conical inlet Wood plank Holders for sliding attachment Inside gutters Parapet gutters Inside gutters offer the possibility of forming special architectural structures. To guarantee their optimal functionality, we recommend the safety measures described in detail in our Practical Guide for Planning and Installing : sufficient size, expansion joints for longitudinal expansion, funnel-shaped leader heads, minimum distance between water conducting gutters and safety gutters, as well as sufficient slope. A snow guard system or gutter heating guarantees that the gutter remains free of snow. If contractors are not able to carry out the necessary maintenance work on their own, a maintenance agreement should be concluded between the contractor and the execution company. See also the chapter Inside Gutter in our Practical Guide for Planning and Installing. For parapet gutters, the eaves side is executed as wall joint with parapet structure Zambelli System Details 24
26 25 Zambelli System Details Valley gutter
27 Valley gutter Depressed valley structure For roof designs with slopes below 7, it is recommendable to install deeper valleys. In principle, the fundamental rules for the execution of inside gutters also apply to the valleys. If the valley gutter is made by welding, it is important to make anchor points with the welding. See also the chapter Valleys in our Practical Guide for Planning and Installing. Depressed valley gutter Transverse lathing Single layer compressed thermal insulation Valley gutter Inlet sheet Holders for sliding attachment Wood framing Valley rafter Binding rafter Welded valley gutter Valley gutter alu stucco Rafter and welded valley gutter Rafter alu stucco Underlay sheet with high open diffusion Wood lathing Zambelli System Details 26
28 27 Zambelli System Details Sanitary ventilation pipe
29 Roof penetration Room ventilation pipe, welded Roof dome with plug-in connection Pipe cover Insulation Welding seam continuous Thermal insulation (double-layered) Lateral and counter lathing Reinforcing sheet Trapezoidal profile Ventilation pipe Vapour barrier Round roof penetration Round roof penetrations such as room ventilation pipes are sealed using prefabricated, conical supports on the roof surface. The rain cap which is not customarily used for room ventilation pipes is provided for room ventilation. See also the chapter Round roof penetrations in our Practical Guide for Planning and Installing. Pipe cover Insulation Sanitary ventilation pipe Thermal insulation, double layered Lateral and counter lathing Reinforcing sheet Trapezoidal profile Pipe Zambelli System Details 28
30 Aluminium domed roof light hood, welded 29 Zambelli System Details Execution with rear-side lean-to sheet panel
31 Roof penetration Curb for rooflight with backup security Double layered thermal insulation with lateral and counter lathing Insert profile Wood support Domed roof light hoods Curb Trapezoidal profile Curb Domed roof light hood Closure 1 Curb Domed light drainage sheet Insertion sheet Separation layer Framing > 1.5 Lathing 1 Surfacing sheet Wood plank frame Steel beam Surfacing sheet Wood plank frame Static framing Steel beam Domed roof light hood Domed roof lights fulfill an important function in the architectural integration of light in rooms directly below roofs. If the execution of domed roof lights is planned, please take into consideration the load distribution on the weight-bearing structure in the planning stage and install the necessary static framing if necessary. Water drainage and longitudinal expansion of the profile sheets in the area of the roof penetration have to be guaranteed using suitable measures. The heights of the hoods depend on the roof incline and should not be less than 15 cm if possible. For larger sizes and the elimination of watertight welding or soldering operations, the domed roof light hood should be executed with a backup security. Additional information on this topic can be found in our Practical Guide for Planning and Installing. For the domed roof light hood, we recommend the welded model in aluminium. See also the chapter Curb for domelight in our Practical Guide for Planning and Installing. Domed roof light hood with backup security Zambelli System Details 30
32 31 Zambelli System Details Continuous row lighting flashing
33 Roof penetration Continuous row lighting flashing Thermal insulation Continuous row lighting flashing Closure Edge angle Trapezoidal profile Continuous row lighting frame Double layer compressed thermal insulation with transverse and counter lathing Continuous row lighting flashing Depending on the materials used, roof penetrations and their flashings are executed manually, or a waterproof joint is formed by welding or soldering. During the planning phase, please take the expected material expansion into consideration. If continuous row lighting is installed, the rules for domed roof light hoods generally apply. See also the chapter Continuous row lighting flashing in our Practical Guide for Planning and Installing. Continuous row lighting flashing Thermal insulation Continuous row lighting flashing Closure Edge angle Trapezoidal profile Double layer compressed thermal insulation with transverse and counter lathing Zambelli System Details 32
34 33 Zambelli System Details Roof window
35 Roof penetration Roof window Chimney flashing Roof window Wood plank framing Roof window hood Double layer compressed thermal insulation with transverse and counter lathing Sealant strip Flat pan Flashing eaves side Closure Wood plank framing Base flashing Thermal insulation Rear base flashing Interior panelling Trapezoidal profile Rafter Profile filler Z-shaped profile (transverse) with thermal separation Base flashing Trapezoidal profile Steel binding rafter Rectangular roof penetrations Chimney flashing requires the installation of an additional flat pan strip. In principle, the rules valid for wall joints are to be followed. For roof windows with pitches of 15 and more, the execution with sealing frames is sufficient. Additional information can be found in our Practical Guide for Planning and Installing. See also the chapter Chimney flashings in our Practical Guide for Planning and Installing. Chimney flashing Zambelli System Details 34
36 35 Zambelli System Details Snow fence device with ice stopper Systems Speed 500 (left) and 465 (right)
37 System accessories Snow fence device/ice stopper/mounted brackets for solar module, lightning conductor and terraced gradients Terraced gradients Roof and facade work with offers numerous possibilities, taking into consideration special structural requirements. Our wide range of accessories includes snow fence device, ice stoppers, mounted brackets for solar module, lightning conductor and terraced gradients, harness security system etc. All accessories have been optimized in design and functionality for and can be installed using the system-typical clamping principle without needing to perforate the profile sheets. See also the chapter Snow fence, ice stopper, mounted bracket for solar module and harness security system in our Practical Guide for Planning and Installing. Ice stopper Snow fence pipe Ø 32mm Clamping plate Gutter Underlay sheet with Gutter inlet sheet high open diffusion Eaves blind Speed 500 Snow fence device Wood lathing Rafter Snow fence device with ice stopper System Speed 500 Ice stopper Clamping plate Snow fence pipe Ø 32mm Snow fence device with ice stopper System Speed 465 Ice stopper Clamping plate Snow fence pipe Ø 32mm Zambelli System Details 36
38 37 Zambelli System Details
39 System accessories Harness security system on curved 465 Harness security system The gliding element can be opened and attached or removed at any place in the system. In this way, the inconvenient reattachment at intermediate brackets and prescribed entry points is avoided. Harness security systems are stationary installations. They are conceived for all horizontal, sloped and vertical areas of application. The bearing elements are made of stainless steel or aluminium alloy. Methods for movement around corners in various designs enable unimpaired changes in the direction. The harness security system can be installed on any place at all The harness security system products fulfill the EC Guideline 89/686 EEC, have been tested for construction applications, and are made according to current DIN standards and carry a CE certification. Fastening of the harness security system without penetration Intermediate support may be crossed Corner by-pass Zambelli System Details 38
40 Metal Roofing Systems Shelving Systems Roof And Wall Industrial Metal Works Supply for Caravan Industry Zambelli GmbH & Co. KG Passauer Straße D Grafenau Export +49(0) Telephone Fax +49(0) Fax +49(0)85 rib-roof@zambelli.de www rib-roof@zambelli.de www zambelli.de
PREFA Aluminiumprodukte GmbH Page 1 of 25
Tender Specifications 120901 PREFALZ Double Standing Seam_2012 ---------------------------------------------------------------------------------- 01. Text GENERAL PRELIMINARY REMARKS Roof ----------------------------------------------------------------------------------
More informationPREFA Aluminiumprodukte GmbH Page 1 of 21
Tender Specifications 120901 PREFA Shingles_2012 ---------------------------------------------------------------------------------- 01. Text GENERAL PRELIMINARY REMARKS Roof ----------------------------------------------------------------------------------
More informationmounting systems applications overview
mounting systems applications overview catalogue version January 2015 tritec mounting systems: overview of applications i. pitched roof: roof-top 1. Tiles, shingles and corrugated panels 1.1 TRI-STAND
More informationBENCHMARK Evolution Axis
Sheet List EVO VT 00 B DIRECTION OF PREVAILING WIND VERTICAL PANEL JOINT & FASTENER LOCATIONS DIRECTION OF LAY FACTORY APPLIED WEATHER SEAL CONCEALED PANEL FIXING NOTE: FASTENER NUMBERS DEPEND ON THE ACTUAL
More informationInsulating systems used in agricultural and industrial buildings
Insulating systems used in agricultural and industrial buildings INTRODUCTION Since years, RECTICEL is a leading manufacturer of systems for internal insulation. The EUROTHANE product range has been especially
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION SECTION 07320 TWO-PIECE TAPERED MISSION CLAY ROOFING TILE PART 1 GENERAL 1.01 SECTION INCLUDES A. Formed clay roofing tiles, complete with components and other required accessories
More informationSymmetrical Cladding. Laying instructions
Symmetrical Cladding. Laying instructions PREFACE 1. Construction requirements These laying instructions describe the application of InterSIN slate, SIN 970 and ColorSIN, CS 35 or CS 50 together with the
More informationOriginal Scandinavian rainwater system
Original Scandinavian rainwater system Siba Siba Square Contents Siba rainwater systems 3 Measuring 15-16 Siba 4-9 Gutter brackets 18-19 Siba Square 10-11 Gutters 20-23 Materials 12 Angles 24 Technical
More informationPIPE. Central Texas Largest Distributor. Structural Steel, Pipe and Metal Building Components
Central Texas Largest Distributor Structural Steel, Pipe and Metal Building Components PIPE Waco Location P.O. Box 154485 913 South Loop Dr. Waco Texas 76705 Local - 254-754-2611 Bryan Location 9401 E.
More informationMetal Roof Panels
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 074113 - Metal
More informationProduct Overview Aluminium facade, roof and ceiling profiles. flexible building. sustainable thinking.
Product Overview Aluminium facade, roof and ceiling profiles flexible building. sustainable thinking. Aluform always a part of the future A building material like no other: Aluminium facade, roof and ceiling
More informationTechnical specifications Prefab Steel Canopy
Canopy Structure: Technical specifications Prefab Steel Canopy Design fabrication and installation of pre-engineered / pre- fabricated steel canopy as per the following specification: The canopy steel
More informationMounting instructions. novotegra for trapezoidal metal - roof parallel
Mounting instructions novotegra for trapezoidal metal - roof parallel I TABLE OF CONTENTS 1 Notes... 1 2 Maintenance of the mounting system... 3 3 novotegra for trapezoidal metal - roof parallel... 3 4
More informationProtan Exposed Membrane Roof. Your design - Our solution
Protan Exposed Membrane Roof Your design - Our solution Exposed membrane roof The principle function of a roof is to provide durable protection against the external environment to a building. Unprotected
More informationHELIOSTAR 252, 218 HORIZONTAL, FREE INSTALLATION
HELIOSTAR 252, 218 HORIZONTAL, FREE INSTALLATION INSTALLATION INSTRUCTIONS ENERGY AND SANITARY SYSTEMS Installation requirements General requirements The free-standing installation set is to be used for
More informationALLMET CONTINENTAL INSTALLATION GUIDE
ALLMET CONTINENTAL INSTALLATION GUIDE www.allmet.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Allmet Continental
More informationSub-construction for Wall-mounted Longlight
modular skylights Sub-construction for Wall-mounted Longlight Subconstruction for Wall-mounted Longlight at 5-40 pitch modular skylights in a wall-mounted longlight solution, can be installed on a sub-construction
More informationCOMP ONENT CATA LO GUE FOR INDUSTRIAL BUILDINGS
M a d e f o r b u i l d i n g b u i l t f o r l i v i n g COMP ONENT CATA LO GUE FOR INDUSTRIAL BUILDINGS I M P R i n t KLH Massivholz GmbH Publisher and responsible for the content: KLH Massivholz GmbH
More informationRoof Replacement. Notes: T-1 (Title Sheet) Roof Key Plan Russell House Student Union 1400 Greene Street Columbia, South Carolina 29208
Notes: Drawing Index T-1 Title R-1 Roof Plan - Existing Conditions R-2 Roof Plan - New D-1 Roof Details D-2 Roof Details D-3 Roof Details M-1 Mechanical - Roof Plan M-2 Mechanical - Details Roof Key Plan
More informationifix INSTALLATION MANUAL PV flat roof installation system Version
ifix PV flat roof installation system INSTALLATION MANUAL Version 2012-09-06 ifix Installation Manual Version 2012-09-06 Seite 1 Table of contents Table of contents... 1 Special characteristics of ifix...
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More informationSMART FIXING SYSTEMS
SMART FIXING SYSTEMS REAR-VENTILATED FACADE The hung, rear-ventilated facade (RVF) covers the load bearing wall of a building. With a RVF, the facade elements are mounted with the help of a fixing system
More informationON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR
ON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR INSTALLATION INSTRUCTIONS ENERGY AND SANITARY SYSTEMS Installation requirements Generel requirements The on-roof attachment set is capable for installation of
More informationRenovation of Buildings using Steel Technologies (ROBUST)
Renovation of Buildings using Steel Technologies (ROBUST) RFCS Project RFSR-CT-2007-0043 WP 4.2 Renovation of roofs using open trusses in light steel C sections Date: 2009 Author: Mark Lawson SCI, Silwood
More information11 FLAT ROOF CONSTRUCTION
CARPENTRY & JOINERY FCA CARPENTRY & JOINERY THEORY 11 FLAT ROOF Flat Roofs The definition of a flat roof is any roof which has a slope of less than 10 degrees or a fall ratio of 1:6. This type of roof
More informationTopduo Roofing screw. Corrosion protection. Advantages blue+ coating. Advantages Topduo Roofing screw
Topduo Roofing screw The wood-construction screw for all over-rafter insulation systems Corrosion protection blue+ is an innovative coating system with greater corrosion resistance than conventional electrogalvanised
More informationHELIOSTAR 252, 218 VERTICAL, FREE INSTALLATION
HELIOSTAR 252, 218 VERTICAL, FREE INSTALLATION INSTRUCTION MANUAL ENERGY AND SANITARY SYSTEMS Installation requirements General requirements The free-standing installation set is to be used or installing
More informationThe under-tile thermo insulating system INSTRUCTIONS FOR CORRECT INSTALLATION
The under-tile thermo insulating system INSTRUCTIONS FOR CORRECT INSTALLATION The under-tile thermo insulating system PHASE 1 STARTING INSTALLATION Pag. 3 NOTE CUTTING THE PANEL Pag. 4 PHASE 2 JOINTS AND
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationSECTION PLATE CONNECTED WOOD TRUSSES
SECTION 06173 PLATE CONNECTED WOOD TRUSSES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Shop fabricated wood trusses for roof and floor framing. 2. Bridging, bracing, and anchorage. B. Related Sections:
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationInstallation instructions
Installation instructions Holetherm Double-walled flue gas discharge system (DW) 2016 All information in this release is subject to misprints. No liability is accepted for the consequences of misprints.
More informationAPPENDIX E KALZIP FAÇADE SYSTEM
APPENDIX E KALZIP FAÇADE SYSTEM Kalzip FC rainscreen system Contents Page FC rainscreen system simple, flexible and economical Product and system characteristics 4 Features and benefits 5 System options
More informationTRIAD CORRUGATED METAL, INC.
TRIAD CORRUGATED METAL, INC. C O M M E R C I A L R E S I D E N T I A L A G R I C U L T U R A L Snap Loc Panel Guide Snap Loc metal panels are a perfect fit for residential, architectural and commercial
More informationINTRODUCTION. GANG-NAIL Truss System
INTRODUCTION MiTek Australia Ltd revolutionised house construction in Australia when it introduced the use of Gang-Nail multi-tooth connectors for the manufacture of prefabricated timber trusses in the
More informationNCMA TEK TEK 19-5A FLASHING DETAILS FOR CONCRETE MASONRY WALLS
NCMA TEK National Concrete Masonry Association an information series from the national authority on concrete masonry technology FLASHING DETAILS FOR CONCRETE MASONRY WALLS TEK 19-5A Water Penetration Resistance
More informationSLATE ROOFING INSTALLATION PROPOSAL [Last updated 10/08/2017]
[Change these specifications as needed. Use this sample proposal at your own risk. This is a simple, general proposal and is not meant to be a comprehensive proposal for all situations or projects. If
More informationSub-construction for longlight
modular skylights Sub-construction for longlight Sub-construction for longlight at 5-25 pitch modular skylights installed in a longlight solution are build on a sub-construction made of wood, steel or
More informationSECTION METAL BUILDING SYSTEMS
SECTION 13 3419 PART 1 GENERAL 1.01 SECTION INCLUDES A. Manufacturer-engineered, shop-fabricated structural steel building frame. B. Insulated Metal wall and roof panels including gutters and downspouts.
More informationTile profiles. Profiles for doormat inset frames: ENTRY. Angle profile for balconies: DURABAL. Brass. Aluminium
Tile profiles Profiles for doormat inset frames: ENTRY Brass Aluminium Rotating by 90 allows the profiles to be used for two different heights of door mat inset frame. Installed with angle connector and
More informationNOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer)
NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION MASTERFORMAT SECTION 04818 (Mortarless Concrete Brick Veneer) Spec_USA_En_18102005.doc 12/1/2005 Novabrik Page 2 Section 04818 NOVABRIK MORTARLESS
More informationDesign Manual Facade, riveted Panel fixed to T-Sections
Design Manual Facade, riveted Part Product changes in the sense of a technical progress are reserved. All advice recommendation and information is given to the best of our knowledge but without any obligation
More informationBrava Spanish Tile. Installation Manual. Brava Roof Tile Phone: Fax:
Brava Spanish Tile Installation Manual Brava Roof Tile Phone: 319-338-5706 Fax: 319-343-1038 www.bravarooftile.com This document includes the recommended and suggested installation procedures for Brava
More informationFaçade panels riveted on an aluminium supporting structure
Ventilated façade 1 General These application instructions are specifically intended for the fastening of large-size EURO PANELS OVERSEAS N.V. façade panels as outside wall cladding on a ventilated and
More informationContents DESIGNER S STRUCTURAL PRODUCTS GUIDE. Tegral Purlins & Rails
DESIGNER S STRUCTURAL PRODUCTS GUIDE Introduction Contents Tegral Purlins & Rails Zeta Purlins & Rails Zeta Purlins page 8 Zeta Rails page 15 Zeta Purlin & Rail Cleats page 22 Zeta 2 Purlins & Rails Zeta
More informationWestern States 7/8 Corrugated
Western States 7/8 Corrugated Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer / Installers..1 Fastener Placement and Selection.2-3 Key
More informationSolarStyl BIPV New Building Integrated Photovoltaic System August V13 Page 0
SolarStyl BIPV New Building Integrated Photovoltaic System 2010 August V13 Page 0 By ArcelorMittal Stainless & Nickel Alloys SolarStyl Frame for BIPV Systems To simplify photovoltaic roof and facade design.
More informationOnduline Oversheeting Benefits. Onduline Sheet Specification. Insulation. The Onduline colour range
Onduline Oversheeting Benefits Low cost. The Onduline colour range Reduced health risk in handling and disposing of existing hazardous roof coverings. Virtually maintenance-free. Improved thermal and sound
More informationTRAPEZOIDAL SHEET METAL RAIL
Photovoltaic Mounting Systems Assembly Instructions TRAPEZOIDAL SHEET METAL RAIL Mounting system for roofing with trapezoidal sheet metal S:FLEX GmbH 09/2017 / design and engineering is subject to change
More informationROOF RENOVATION OVERSHEETING SYSTEM
CI SfB (4-) Nn2 ROOF RENOVATION OVERSHEETING SYSTEM BBA BRITISH BOARD OF AGREMENT CERTIFICATE NO. 87 / 1823/C Renovation Oversheeting System The system has been developed using the proven Onduline weathering
More informationREPORT HOLDER: RARE MANUFACTURING INC A AVENUE SURREY, BRITISH COLUMBIA V4N 4P2 CANADA EVALUATION SUBJECT: IRONWOOD SHAKE
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2134 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00
More informationINSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK
INSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK A. 1. Using curb ribs as a guide, layout and mark roof openings on completed roof deck as outside curb
More informationSECTION MASONRY ACCESSORIES
PART 1 GENERAL 1.01 SCOPE OF WORK A. Contractor shall furnish all labor, materials, equipment and incidentals required to provide masonry accessories as shown on the Contract Drawings and specified herein.
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationThe Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
More informationMODULAR ACOUSTIC FENCING INSTALLATION GUIDE
MODULAR ACOUSTIC FENCING WWW.QUICKBUILTSYSTEMS.COM.AU INSTALLATION GUIDE INTRODUCTION THE QUICKBUILT FENCE SYSTEM IS A SMARTLY DESIGNED MODULAR SYSTEM EASY AND FAST TO INSTALL AND COST EFFECTIVE. // THE
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSHEET METAL ROOF TEST REPORT
SHEET METAL ROOF TEST REPORT Introduction The time tested performance of the double lock standing seam and batten seam metal roofing is demonstrated by thousands of squares successfully installed by SMACNA
More informationChapter 7. Roof Framing
Chapter 7. Roof Framing 7.1 ROOFING PREP WORK 7.2 INSTALLING ROOF TRUSSES 7.3 INSTALLING PORCH TRUSSES 7.4 SHEATHING ROOF 7.5 INSTALLING SUB-FASCIA 7.6 BUILDING AND INSTALLING SCUTTLE BOX 7.7 INSTALLING
More informationROOF MOUNT KIT OWNERS MANUAL
ROOF MOUNT KIT OWNERS MANUAL Made in the USA by: Primus Wind Power, Inc. 938 Quail St. Lakewood, CO 80215 Phone: (303) 242-5820 www.primuswindpower.com AIR is a trademark of Primus Wind Power, Inc. ROOF
More informationNUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS
NUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS Nucor VR16 II Vertical Rib Standing Seam Roof System...2 Nucor VR16 II Property and Span Tables...3 Standard Details...5 ED3010PE - Gutter...5
More informationReal Brick Cladding. Iso Klink Pur. Brick Panel System Catalogue
Iso Klink Pur Brick Panel System Catalogue 1 BRICK CLADDING PANEL SYSTEM Combination of high performance pur insulation and brick cladding, creating durable and aesthetic system which is quick and easy
More informationVAN RACKING SYSTEMS.
VAN RACKING SYSTEMS www.baggioedesordi.com VAN RACKING SYSTEMS We organize the space of each van and improving its capacity. Our objective? Making the interior equipment rational and safe. Upright > Material:
More informationPITCHED ROOF. Photovoltaic Mounting Systems. Assembly Instructions. for roofing tiles, plain tiles and slate
Photovoltaic Mounting Systems Assembly Instructions PITCHED ROOF for roofing tiles, plain tiles and slate S:FLEX GmbH 09/2017 / design and engineering is subject to change 1 Index 1 Introduction 1.1 Intended
More informationSpecifiers: Click on the icon in the WORD toolbar to reveal detailed instructions
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated
More informationD Side lap. Side lap screw spacing < 500mm factory-installed seals on side lap. Decoupling tape > 60mm
25 Side lap screw spacing < 500mm 333.3 15 42 Decoupling tape > 60mm 3 factory-installed seals on side lap Side lap D 201.1 SECTION VIEWS Type L Ridge profile Type R Ridge flashing FLOOR PLAN > 200 overlap
More informationINSULATION RETROFIT DESIGN ENERGY SOLUTIONS CENTRE YUKON GOVERNMENT
INSULATION RETROFIT DESIGN ENERGY SOLUTIONS CENTRE YUKON GOVERNMENT MAY 2009 prepared by N. A. JACOBSEN, P.Eng. CIVIL ENGINEERING CONSULTANT Whitehorse, Yukon ENERGY SOLUTIONS CENTRE YUKON GOVERNMENT MAY
More informationTECHNICAL GUIDANCE XXXX 2015 EXXON QUESTION ANSWER. page 1 of 9
MARKINGWALLING OF SAFETY GLASS SPANDREL CURTAIN PANELS FORMED TO COLDFROM ROOFS STACKED WINDOW 7.2 /25 January ARRANGEMENTS (First Issue) XXXX EXXON QUESTION Which factors should be taken into account
More informationGlobal Roofing Solutions Zip-Tek 420 TM
GRS Zip-Tek 420 Global Roofing Solutions Zip-Tek 420 TM Talk to THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za GRS Zip-Tek 420 GRS Zip-Tek 420 07/17 Typical Specification
More informationHoesch Roof System 2000
HOESCH ROOF SYSTEM 2000 Efficient building means applying rational building techniques with appropriate materials. In order to carry out building tasks systematically with as little effort, time and expense
More informationRUUKKI FORMA DESIGN INSTRUCTION
www.ruukki.com RUUKKI FORMA DESIGN INSTRUCTION 1. General Ruukki Forma is a complete façade system in which Ruukki energy panels form an energy efficient base structure and Ruukki cladding products finalize
More informationSandwich panel SPA Product description
Sandwich panel SPA Product description Ruukki offers a sandwich panel system that combines an attractive appearance with excellent thermal insulation and fire-resistance. The panels are of a lightweight,
More informationViking Enviroclad Waterproofing Membrane. EC01 Enviroclad Drip Edge Specify from the above three options
*lum ngle 50x50x1.6mm min. with 20mm lum fixing bar to mechanically secure membrane Enviroclad Waterproofing Membrane Substrate to comply with current Roofspec Masterspec specification Substrate Checksheet
More informationGeneral technical terms and conditions of TAIM e.v. for. M e t a l c e i l i n g s
General technical terms and conditions of TAIM e.v. for M e t a l c e i l i n g s November 2009 Foreword The general technical terms and conditions have been prepared under the guidance of the technical
More informationWALL CEILING FACADE ACCESSORIES ACCESS PANELS CONTACT CLICK TO START
CLICK TO START About Knauf Metal Knauf Metal is part of the Knauf Group, leaders in lightweight construction materials, and a major supplier and manufacturer of metal building systems to the Australian
More informationARCHITECTURAL DESIGN GUIDE
CFR INSULATED METAL ROOF PANEL ARCHITECTURAL DESIGN GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS INTRODUCTION........................................................2
More informationSarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen).
Roofing Roofing Product Data Sheet Edition 06.2013 Version no. DE 01 English Vapour control layer Product Description Uses Characteristics / Advantages Tests is an unsupported vapour control layer based
More informationDetails for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses
Details for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses Released May 20, 2009 Updated March 9, 2011 Introduction: Wood frame structures with attached brick masonry veneer
More informationVertigo Cladding Board
Installation guide Vertigo Cladding Board Geolam: a stunning alternative to wood cladding Vertigo is a composite wood cladding board requiring minimum maintenance. Durable and fade resistant, it will not
More informationCEILING & WALL SYSTEMS
CEILING & WALL SYSTEMS Axiom Perimeter Trim Commercial Ceilings and Walls Solutions Guide Axiom Perimeter Trim AXIOM Trim The Axiom family of products provide functional and visual options in ceiling design.
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION
ROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION Revised September 14 The General Trade Knowledge portion of the examination is administered daily in Computer Based Testing (CBT)
More informationKingspan Day-Lite Klick
Insulated Panel Envelope Systems Roof Wall Façades Lighting Rooftop PV Coldstore Structural Products Cleanrooms UK & Ireland Kingspan Day-Lite Klick Installation Guide Page 2 Accessories Overview Designation
More informationConstruction. Tricosal Waterstops - Tricomer. Waterstops for joint sealing in watertight concrete construction according to DIN and DIN
Construction Product Data Sheet Edition 19 April 2013 Tricosal Waterstops - Tricomer Waterstops for joint sealing in watertight concrete construction according to DIN 18541 and DIN 18541-2 Product Description
More informationSenergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board
Senergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board NOTES Senergy Platinum CI Stucco Typical details for an
More informationVINITEX INSTALLATION PROCEDURES
VINITEX INSTALLATION PROCEDURES 1 INDex INTRODUCTION PAGE 2 HOT AIR manual WELDING PAGE 6 AUTOMATIC WELDING PAGE 10 WELDING TRANSVERSE JOINTS PAGE 13 T-JOINTS MULTIPLE WELDING SEAMS PAGE 15 PERIMETER
More informationSECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM
PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.
More informationNorthpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationConcepts. Products. Service. Partitions Lindner Logic
Concepts Products Service Partitions Lindner Logic Building new solutions. Lindner undertakes major projects worldwide in all areas of interior fit-out, insulation technology, industrial services and building
More informationThe TKI success kit. The excellently thought-out aluminium profi le system for windows, doors and façades.
The TKI success kit The excellently thought-out aluminium profi le system for windows, doors and façades. Presented by MKF Metallbaukontor Frankfurt GmbH More than 40 years of excellent system engineering
More informationSchluter -KERDI-BOARD Substrate, building panel, bonded waterproofing
Schluter -KERDI-BOARD Substrate, building panel, bonded waterproofing Schluter -KERDI-BOARD The universal substrate for tiles Flat. Level. Plumb. Square. No matter the quality, cost, or extravagance of
More informationTechnical Details Ergoldsbacher E58 flat pantile and E58 MAX
Technical Details Ergoldsbacher E58 flat pantile and E58 MAX A bestseller Ergoldsbacher E58 flat pantile / E58 MAX Over a billion sold. Ergoldsbacher E58 flat pantile also available in the large E58 MAX
More informationAIR BARRIER DESIGN PRINCIPLES AN OVERVIEW.
AIR BARRIER DESIGN PRINCIPLES AN OVERVIEW www.stromatech.com AIR BARRIER DESIGN PRINCIPLES Building Regulations Approved Document Parts L1A & L2A currently requires that new buildings have to achieve a
More informationOpen-Web Trusses. Including Red-L, Red-W, Red-S, Red-M and Red-H Trusses. Design Flexibility. Outstanding Strength-to-Weight Performance
Open-Web Trusses Including Red-L, Red-W, Red-S, Red-M and Red-H Trusses Download your free copy at RedBuilt.com. Specify Open-Web trusses for your next project using RedSpec single-member sizing software.
More informationRS32 Multi-Section Skylight System under/over seam clip double diverter
INSTALLATION INSTRUCTIONS RS32-x RS32 Multi-Section Skylight System under/over seam clip double diverter www.rnssales.com sales@rnssales.com 805.375.3980 Fax 805.375.3981 SKYLIGHT ACRYLIC skyline series
More informationSWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
More informationRoofgard Paving Support System
Roofgard Paving Support System CI/SfB (47) January 2007 Adjustable paving support system for paved and raised deck applications One of a range of Roofgard accessories specially designed to meet the exacting
More informationAnchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
More informationBuilding construction
Transport equipment Storage equipment Civil engineering Building construction Mobile fence Event Road construction Road construction Building construction Building construction - pages 64-87 Formwork prop
More information