CONTENTS INSTRUCTIONS. UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 1

Size: px
Start display at page:

Download "CONTENTS INSTRUCTIONS. UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 1"

Transcription

1 CONTENTS 1 INTRODUCTION 2 JOINTING INSTRUCTIONS 2.1 Conductor Sizes Comparison of Cable Ratings Based on Cable Type and Size Jointers Tool Kit New Harmonised Phase Colours Single-Phase Plastic Service Cables Phase Plastic Service and Waveform Cables Single-Phase PILC to Plastic Service Cables Phase PILC Mains/Service to XLPE Mains/Service Cables LV Boards, Pillars and Take-off Cabinets Service Straight Joints Single-Phase 4mm 2 to 4mm 2 Plastic CNE Cables Single-Phase 4mm 2 to 35mm 2 Plastic CNE Cables Single-Phase Transition 4mm 2 Plastic CNE to 4mm 2 2-Core PILC Cables Single-Phase Transition 4mm 2 to 35mm 2 Plastic CNE 2-Core PILC Cables Phase 16mm 2 to 35mm 2 Plastic CNE Cable Phase Transition 16mm 2 to 35mm 2 Plastic CNE Cable to 4-Core PILC Cables Service Branch Joints Single-Phase 4mm 2 to 4mm 2 Plastic CNE Cables Single-Phase 4mm 2 to 35mm 2 Plastic CNE Cables Single-Phase 4mm 2 Plastic CNE to 4mm 2 2-Core PILC Cables Single-Phase Plastic CNE to 2-Core PILC 4mm 2 to 35mm Cables Single or 3-Phase Plastic Service to a 3-Phase Plastic CNE 16mm 2 to 35mm 2 Cables Single or 3-Phase Service to a PILC Service or Main 16mm 2 to 35mm 2 Cables Service Cut and Test Joints 32 UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 1

2 2.7.1 Single-Phase Plastic CNE Cables 4mm 2 to 35mm Phase Plastic CNE Cables 16mm 2 to 35mm Core PILC Cables 4mm 2 to 35mm Core PILC Service or Main Cables 16mm 2 to 35mm Service Cable Pot Ends Single-Phase Plastic CNE Cables 4mm 2 to 35mm Single-Phase PILC Service Cables 4mm 2 to 35mm Phase Plastic CNE Cables 16mm 2 to 35mm Phase PILC Service Cables 4mm 2 to 35mm Waveform Cables Mains Service Branch Joints Waveform Cables 70mm 2 to 185mm 2 (up to six single-phase or two 3-Phase services) Waveform Cables 240mm 2 to 300mm 2 (up to six single-phase or two 3-Phase services) PILC Mains Service Branch Joints PILC Cables 70mm 2 to 300mm 2 (up to six single-phase or two 3-Phase services) PILC Triple Concentric Cables 70mm 2 to 185mm 2 (up to four single-phase or two 3-Phase services) Mains Straight Joints Waveform to Waveform Straight 95mm 2 to 300mm Waveform to PILC Transition Straight 95mm 2 to 300mm Waveform to CONSAC Transition Straight 95mm 2 to 300mm Waveform to Single or Triple Concentric Transition Straight 95mm 2 to 300mm Mains Branch Joints Waveform to Waveform 95mm 2 to 300mm Waveform to PILC Transition 95mm 2 to 300mm Waveform to Single or Triple Concentric Transition Mains Branch or Mains Service Mains Cut and Test Joints Waveform Cables 70mm 2 to 300mm PILC Cables 70mm 2 to 300mm Temporary LV Joints PILC Mains Cables 95mm 2 to 300mm Waveform Mains Cables 70mm 2 to 300mm Temporary LV Joint Removal Temporary Generator Connection - PILC Mains Cable 70mm 2 to 300mm Temporary Generator Connection - Waveform Mains Cable 70mm 2 to 300mm Loose Connectors and Components Mains Pot End Joints Waveform Cables 70mm 2 to 300mm 2 97 Section Index I Page 2 UK POWER NETWORKS LV JOINTING MANUAL I Version

3 PILC Cables 50mm 2 to 95mm PILC Cables 120mm 2 to 300mm Breaking down Heatshrink Pot End Joints on Plastic Cables Breaking down Heatshrink Pot End Joints on PILC Cables Mains Pole Terminations Waveform Cables 70mm 2 to 185mm 2 for Direct Connection on to the Overhead Line Waveform Cables 70mm 2 to 185mm 2 for Connection to Pole Mounted Fuses (PC400 s) Cut-Outs New Single-Phase 25A PME Cut-Outs New Single-Phase 100A PME Cut-Outs New Single-Phase 100A SNE Cut-Outs New 3-Phase 100A PME Cut-Outs New 3-Phase 200A PME and SNE Cut-Outs on Waveform Cables New 3-Phase 400 and 600A PME and SNE Cut-Outs on Waveform Cables Multi-Service Distribution Boards Termination of Waveform Cables into LV Distribution Cabinets or onto LV Distribution Boards and 4-Way LV Link Boxes Tailed Link Boxes Waveform Cable in to an Un-Tailed Box PILC Cable into an Un-Tailed Box Installation of Plastic Pit Frame and Pavement Cover Replacement Pit Frames and Pavement Covers Service Distribution Units Waveform Mains Cable Single-Phase Concentric Service Cables Phase Concentric Service Cables 187 UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 3

4 3 PROCEDURES FOR STRIPPING LOW VOLTAGE CABLES 3.1 Scope Paper Insulated Lead Sheathed Cables (PILC) Removing the Outer Serving Removing Steel Wire Armour Removing Steel Tape Armour Removing the Inner Bitumen Layer Use of Temporary Continuity Bond Removing the Lead Sheath Removing the Belt Papers and Filters Cutting the Phase Cores Removing the Paper Core Insulation (Cable Core End) Removing the Paper Core Insulation (Through Cable Cores) Waveform Cables Branch and Service Joints Removing the Outer PVC Sheath Removing the Outer Bedding Layer Preparing the CNE Wires Removing the Inner Bedding Layer Separating the Phase Cores Waveform Cables Straight Joints Removing the Outer PVC Sheath Removing the Outer Bedding Layer Preparing the CNE Wires Removing the Inner Bedding Layer Separating the Phase Cores Cutting the Phase Cores Removing the XLPE Core Insulation New Single-Phase Concentric Service Cables Removing the Outer PVC Sheath Preparing the CNE Wires Removing the Core Insulation New 3-Phase Concentric Service Cables Removing the Outer PVC Sheath Preparing the CNE Wires Removing the Inner Bedding Layer and Fillers 35 Section Index I Page 4 UK POWER NETWORKS LV JOINTING MANUAL I Version

5 3.6.4 Removing the Core Insulation Live Single-Phase Concentric Service Cables Removing the Outer PVC Sheath Preparation of CNE Wires - Live Cut Cutting the Phase Core for Pot End Preparation of CNE Wires - Live Branch Joints Live 3-Phase Concentric Service Cables Removing the Outer PVC Sheath Preparation of CNE Wires - Live Cut Cutting the Phase Cores for Pot End Live 3-Phase Concentric Branch Joints Removing the Inner Bedding Layer and Fillers CONSAC Cables Removing the Outer PVC Sheath and Bitumen Layer Aluminium Sheath Tools Cutting or Opening the Aluminium Sheath on a Continuous Main Opening and Cutting the Aluminium Sheath on a Cable End Removing the Belt Papers Cutting the Phase Cores Removing the Paper Core Insulation (Cable Core End) Removal of Paper Core Insulation (Through Cable Cores) Single and Triple Concentric Cables Removing the Outer Servings/Armours Fitting the Temporary Earth Bond Removing the Lead Sheath Removing the Belt Papers Removing the Neutral Strands Fitting Temporary Shrouding Removing the Core Papers Removing the Outer Phase Strands Insulating the Outer Phase Core Earth Pins and Cables Earth Cable Preparation Fitting the Earth Cable to an Earth Pin Breaking Down Compound Filled Lead Sleeve Joints Breaking Down Compound Filled Lead Sleeve Straight Joints Breaking Down Compound Filled Lead Sleeve Service Branch Joints Making Room for a New Straight Joint Behind a Broken Down Joint Stripping and Preparation of PVC Insulated Steel Wire Armoured Cable 94 UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 5

6 Outer PVC Sheath and Steel Wire Armour Removal Steel Wire Armour Termination Inner PVC Sheath Removal 97 4 INSTALLING MECHANICAL CONNECTORS AND COMPONENTS 4.1 Installing Mechanical Neutral Earth Connectors NET1 for Consac Joints NE19 for Concentric Service Joints NE13, 14 and 26 for Waveform Joints Installing Mechanical Service and Mains/Service Connectors SS4W for 4mm 2 (0.007in) Service Joints SS35/4 for 16mm 2 (0.0225in) to 35mm 2 (0.04in) Service Joints MSD Insulated Insulation Piercing Connectors To Convert a MSD IIPC into a MSD2 IIPC MF2 and MF4 Insulated Tunnel Connectors NMS Insulted mains Service Branch Connectors MB21 Insulated Service Branch Connectors Installing Mechanical Mains Straight Connectors UM 95, 185 and 300 for PILC or Waveform Mains Straight Joints Service Bridge Piece for UM Connectors Installing Mechanical Mains Branch Connectors LVM 1, 2 and 3 for PILC and Waveform Branch Joints WB Neutral Connectors for Waveform to PILC Branch Joints Installing Mechanical Pole Termination Connectors MF15/1, 2 and 3 for Waveform Cables Direct Overhead Line Connection ML1 and 2 Lugs for Pole Terminations PC400 Connections Installing Mechanical End Termination Connectors UMT and UT Connectors for Cut-Outs, LV Boards and Multi-Service Distribution Boards Installing Mechanical Earth Bonds for PILC Cables Constant Force Spring Service Termination Bond Constant Force Spring Service Joint Bond PILC Mains PME Bond PILC Heatshrink Mains Pot End Joints Installing Joint Shells and Polyurethane Resin Plastic Joint Shells 42 Section Index I Page 6 UK POWER NETWORKS LV JOINTING MANUAL I Version

7 4.8.2 Mixing and Pouring JEM Resin Installing Insulation Materials Velcro-Edged Temporary Insulation Moulded Waveform Neutral Earth Connector Shrouds Non-Adhesive PVC Tape Permanent CR Sheet Insulation Patches Permanent Dip-Moulded Insulation Shrouds Permanent Injection Moulded Insulation Shrouds Installing Heatshrink Tubing and Components Thin-Wall Tube Heavy-Duty Adhesive-Lined Tube Breakouts End Caps Zipper Sleeves 54 5 CUT-OUT CHANGES 5.1 Single-Phase Two Piece Insulated Cut-Out Containing Plastic Service Cable Single-Phase Two Piece Insulated Cut-Out Containing PILC Cable One Piece Insulated Cut-Out Containing PILC Cable PILC Cable Consumer Earth Bonds LIVE Cut-Out Change Decision Flowchart Breaking Down a Single Phase Metal Clad Compound Filled Cut-Out Containing PILC Cable Breaking Down a Single Phase Insultaed Compound Filled Cut-Out Containing PILC Cable Installing a New Single Phase Cut-Out on to an Existing Single Phase PILC Cable 64 UK POWER NETWORKS LV JOINTING MANUAL I Version Section Index I Page 7

8

Cable Jointing Manual. Jointing Procedures. Module 18. Concentric Cables

Cable Jointing Manual. Jointing Procedures. Module 18. Concentric Cables Cable Jointing Manual Jointing Procedures Module 18 Concentric Cables Version: 1.0 Date of Issue: June 2008 Author: Richard Summers Job Title: Cables Specialist Approver: Keith Nutter Job Title: Network

More information

Electrical Insulating Tapes

Electrical Insulating Tapes Electrical Insulating Tapes Energy, Mining, Industrial and Contractors applications LV and MV electrical jointing and termination applications Adhesive or Self-amalgamating UV resistant Cold and weather

More information

TESTING PTE EARTHING

TESTING PTE EARTHING 1 SCOPE This section of the Power Systems Live Working Manual details the procedures to be followed to achieve Safety from the System when carrying out examination, testing and remedial work on PTE (Pole

More information

Tender No. : GAIL/PA14/51603/ /RK [E-Tender Bid Invitation No ]

Tender No. : GAIL/PA14/51603/ /RK [E-Tender Bid Invitation No ] 1.1 SCHEDULE OF RATES SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 8A RATING, MMO VERTICAL ANODE BED: Supply, installation, testing and commissioning of 8 A rating, MMO tubular anode in vertical type

More information

Effective June, Eaton-Durham Model # UTRS223ACH. Siemens, Model # SUAS877-PG. (or Landis & Gyr # UAS877-PG) Milbank. Model # U1980-O.

Effective June, Eaton-Durham Model # UTRS223ACH. Siemens, Model # SUAS877-PG. (or Landis & Gyr # UAS877-PG) Milbank. Model # U1980-O. Siemens, Model # SUAS877-PG (or Landis & Gyr # UAS877-PG) Eaton-Durham Model # UTRS223ACH Milbank Midwest Model # U980-O UTRS223AMEP These are some examples of the single meter sockets we require for underground

More information

Construction guideline

Construction guideline 1/6 1) SUMMARY OF ABBREVIATIONS FOR CABLE CONSTRUCTION ELEMENTS MSR - : EUPEN code for INSTRUMENTATION CABLES JE - : cable for INDUSTRIAL ELECTRONICS RD - : cable for CONTROL SYSTEMS INSULATION MATERIALS:

More information

SECTION GROUNDING AND BONDING

SECTION GROUNDING AND BONDING SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and

More information

Cast resin joint for paper- and plastic insulated cables for low voltage applications till 0,6/1 (1,2) kv.

Cast resin joint for paper- and plastic insulated cables for low voltage applications till 0,6/1 (1,2) kv. Cast resin joints Straight connection joint various sizes Cast resin joint for paper- and plastic insulated cables for low voltage applications till 0,6/1 (1,2) kv. Application: Underground, above ground,

More information

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the

More information

2015 Code Rollout Meeting Q & A

2015 Code Rollout Meeting Q & A 1 SECTION QUESTION SaskPower Inspections Dept. ANSWER 2 3 4 5 6 7 8 9 10 11 12 15-02-024 15-02-200 15-02-200 15-02-200 15-02-314 Are existing single or double 'weather proof when not in use' covers allowed

More information

(Condensed from National Electric Code)

(Condensed from National Electric Code) WIRING, SPECIFICATIONS, INSPECTION, AND METER INSTALLATION PROCEDURES FOR RESIDENTIAL CUSTOMERS SERVED BY SOUTHWEST ARKANSAS ELECTRIC COOPERATIVE CORPORATION Effective April 1, 1974 Revised February 3,

More information

WIRING METHODS CHAPTER 38

WIRING METHODS CHAPTER 38 CHAPTER 38 WIRING METHODS SECTION E3801 GENERAL REQUIREMENTS E3801.1 Scope. This chapter covers the wiring methods for services, feeders and branch circuits for electrical power and distribution. E3801.2

More information

This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.

This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral

More information

SECTION INSULATED WIRE AND CABLE

SECTION INSULATED WIRE AND CABLE SECTION 16120 INSULATED WIRE AND CABLE PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Insulated Wire and Cable, which includes the following items with accessories, and appurtenances:

More information

CONDUITS AND FITTINGS

CONDUITS AND FITTINGS CONDUIT AND FITTINGS Rigid Steel Conduit 3801 Rigid PVC Conduit 3803 HDPE Conduit 3803 Flexible Non Metallic Liquid Tight Conduit Type LFNC-B 3804 PVC Coated Urethane Lined Galvanized Rigid Steel Conduit

More information

Index. P. 02 Your expertise and ours combined P. 02 Analysis of your application P. 02 Prototypes and pilot series

Index. P. 02 Your expertise and ours combined P. 02 Analysis of your application P. 02 Prototypes and pilot series Index Your partner in design P. 02 Your expertise and ours combined P. 02 Analysis of your application P. 02 Prototypes and pilot series Cost reduction P. 04 Permanent reduction of structural costs P.

More information

CHAPTER 11 CONDUITS AND FITTINGS

CHAPTER 11 CONDUITS AND FITTINGS CONDUITS AND FITTINGS CHAPTER 11 CONDUITS AND FITTINGS The standards and requirements for conduits and fittings used for traffic control signal and lighting systems are presented in this chapter. 11.1

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables

More information

Aluminium Excellence Performance in Economical Way

Aluminium Excellence Performance in Economical Way OPPER CLAD Aluminium Excellence Performance in Economical Way www.jmv.co.in Leading The Nation Towards Electrical Safety With the growing industrialization, the demand of electrical safety is increasing

More information

TEMPORARY METER POLE INSTALLATION

TEMPORARY METER POLE INSTALLATION TEMPARY METER POLE INSTALLATION MEMBER PROVIDED Location to be made by REMC within 50' of our transformer or existing service Temporary pole to be properly braced 24" 3 wire weatherhead (located 24" from

More information

Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11

Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11 Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11 Underground Residential Distribution (URD) Index General Discussion... 1-2 Description... 3-7 Drawings (Available

More information

Solar Powered TS1000 Installation Pictures. (Trench and Fill Method) City of Vallejo, CA

Solar Powered TS1000 Installation Pictures. (Trench and Fill Method) City of Vallejo, CA Solar Powered TS1000 Installation Pictures (Trench and Fill Method) City of Vallejo, CA 12/04/09 Page 1 Pre-installation Phase 1. Main system components arrive on one or more pallets. 2. Optional pole

More information

Temporary Wiring Practices And Guidelines For NECA. National Electrical Contractors Association Omaha, Nebraska

Temporary Wiring Practices And Guidelines For NECA. National Electrical Contractors Association Omaha, Nebraska Temporary Wiring Practices And Guidelines For NECA National Electrical Contractors Association Omaha, Nebraska Table of Contents I. Planning II. Lighting and Power III. Maintenance IV. Inspections V. Routing

More information

The University of Texas at Austin September 30, 2011

The University of Texas at Austin September 30, 2011 SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 SUMMARY A. This section governs the products and execution requirements relating to furnishing and installing grounding and

More information

NUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0

NUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0 REVISION NO. 0 NUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0 PAGE NO. 1 OF 24 DATE OF ISSUE (MONTH/YEAR) TOTAL NO. OF PAGES (Including cover

More information

Revision 1 RAM ELEVATORS. Elevator Electrical Planning Guide. RAM Manufacturing Ltd

Revision 1 RAM ELEVATORS. Elevator Electrical Planning Guide. RAM Manufacturing Ltd RAM ELEVATORS Elevator Electrical Planning Guide This guide is intended for people with an understanding of electricity. If you are not, please consult a licensed electrician as errors in application of

More information

INSTALLATION MANUAL PIPE SUPPORT

INSTALLATION MANUAL PIPE SUPPORT INSTALLATION MANUAL PIPE SUPPORT Clock Spring Company L.P. 621 Lockhaven Dr. Houston, Texas, 77073 Phone: 281-590-8491, 800-471-0060 Fax. 281-590-9528 http://www.clockspring.com 1 Full Snap Wrap Kit Installation

More information

UNITED NATIONS DEVELOPMENT PROGRAMME ITB

UNITED NATIONS DEVELOPMENT PROGRAMME ITB UNITED NATIONS DEVELOPMENT PROGRAMME ITB 2017-078 Bill of Quantities Project name: Package 2: External Lighting PAL10-00099398 / Rehabilitate GIE Infrastructure General *All installation works must be

More information

We are one of the trusted manufacturers, wholesaler, and services provider of high-quality Industrial Components.

We are one of the trusted manufacturers, wholesaler, and services provider of high-quality Industrial Components. +91-8079454213 Reshma Moulding Works https://www.indiamart.com/reshma-moulding-works/ We are one of the trusted manufacturers, wholesaler, and services provider of high-quality Industrial Components. About

More information

History of Cable Systems HISTORICAL OVERVIEW OF MEDIUM & HIGH VOLTAGE CABLES. Nigel Hampton

History of Cable Systems HISTORICAL OVERVIEW OF MEDIUM & HIGH VOLTAGE CABLES. Nigel Hampton HISTORICAL OVERVIEW OF MEDIUM & HIGH VOLTAGE CABLES Nigel Hampton Copyright GTRC 2012 Objective To present the evolution of cables in time to understand the lessons from the past: the legacy problems and

More information

84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components.

84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components. 84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING

More information

These conditions must be maintained during transport to the laboratory.

These conditions must be maintained during transport to the laboratory. A successful laboratory analysis starts in the field. The result of an analysis is as good as the representativeness of the soil sample used. The sampling procedure is basically determined by the analyses

More information

U.V resistance UL Sunlight Resistance. Flame retardant IEC

U.V resistance UL Sunlight Resistance. Flame retardant IEC Cable for underground power distribution and subtransmission. Description Application Underground power distribution and subtransmission. As transformer feeders in substations. In power plants, industrial

More information

7. EXTENSION LEADS AND COMPENSATING CABLE

7. EXTENSION LEADS AND COMPENSATING CABLE 7. EXTENSION LEADS AND COMPENSATING CABLE 7.1 INTRODUCTION : It is often desirable to connect a thermocouple probe, as a part of a very long circuit from the sensor itself to a remote reference unit and/or

More information

Heritage Quality Performance

Heritage Quality Performance FEP FEATURES AND PROPERTIES Heritage Quality Performance Extruded, FEP insulated, high voltage wire and cable offers exceptional dielectric strength without the disadvantages common to equally rated silicone

More information

MGO INSULATED THERMOCOUPLES INDEX

MGO INSULATED THERMOCOUPLES INDEX MGO INSULATED THERMOCOUPLES INDEX PAGE General Information... M1 Part Numbering Examples... M4 Thermocouple Elements (MA)... M5 Leadwire Style Thermocouples (MB)... M6 Leadwire Style Thermocouples (MD,

More information

Channel reducing strip

Channel reducing strip Filler strips / s PVC filler strips The PVC filler strip can be clipped into the 8 mm longitudinal slot on any extrusion after assembly and is available in grey or black. Grey or black PVC s are used if

More information

33 KV UG Cable Laying Work & Bay Extension Electrical Works - SBI

33 KV UG Cable Laying Work & Bay Extension Electrical Works - SBI 33 KV UG Cable Laying Work & Bay Extension Electrical Works - SBI ABSTRACT S.No Description Amount 1 33KV Bay Extention (132/33KV SS at RC Puram & Gachibowli ) (A+B) 2 33KV UG Cabling Works (C+D) 3 Cable

More information

RS24-10 Single-Section Skylight System

RS24-10 Single-Section Skylight System INSTALLATION INSTRUCTIONS RS24-10 VERSION 1.100316 DATED: 10/03/16 RS24-10 Single-Section Skylight System under/over seam clip double diverter US Patent D750,282 www.rnssales.com sales@rnssales.com 805.375.3980

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60502-2 Second edition 2005-03 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 2: Cables

More information

Johns Manville MinWool Water & Fire Block Mineral Wool Insulation

Johns Manville MinWool Water & Fire Block Mineral Wool Insulation Johns Manville MinWool Water & Fire Block Mineral Wool Insulation Johns Manville s MinWool Water & Fire Block mineral wool insulation provides a vapor-permeable continuous layer of insulation. Along with

More information

2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property

2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property 2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property A brief summary of the most used code references for residential wiring State of Idaho Division of Building Safety Electrical

More information

«CABLE T 92» WORKSHOP BALI, INDONESIA JUNE, 1992 POWER CABLES IN TROPICAL ENVIRONMENTS : SYNTHESIS. By L. DESCHAMPS SEE / EDF (France)

«CABLE T 92» WORKSHOP BALI, INDONESIA JUNE, 1992 POWER CABLES IN TROPICAL ENVIRONMENTS : SYNTHESIS. By L. DESCHAMPS SEE / EDF (France) «CABLE T 92» WORKSHOP BALI, INDONESIA 22-23 JUNE, 1992 POWER CABLES IN TROPICAL ENVIRONMENTS : SYNTHESIS By L. DESCHAMPS SEE / EDF (France) SPONSORS ORGANISATIONS SEE / JICABLE PLN / ITB / APKABEL PATRONAGE

More information

SECTION UNIT MASONRY SYSTEM

SECTION UNIT MASONRY SYSTEM SECTION 04320 UNIT MASONRY SYSTEM PART 1 GENERAL 1.01 SECTION INCLUDES A. Concrete masonry and face brick units. B. Reinforcement, anchorage, and accessories. 1.03 SUBMITTALS A. Submit product data under

More information

FREQUENTLY ASKED QUESTIONS

FREQUENTLY ASKED QUESTIONS March 2010 FREQUENTLY ASKED QUESTIONS Wiring Rules The new edition of the Australian/New Zealand Standard for Wiring Rules (AS/NZS 3000:2007) was released in November 2007 and revised by Amendment 1 in

More information

SECTION P -- CABLE VAULT AND CABLE ENTRANCE FACILITY

SECTION P -- CABLE VAULT AND CABLE ENTRANCE FACILITY INSTLLTION REQUIREMENTS Section P, TT-TP-76300 T&T January 2012 Revised July, 2012 SECTION P -- CLE VULT ND CLE ENTRNCE FCILITY CONTENTS PGE 1. GENERL... P-1 1.1. Introduction... P-1 1.2. Non-Insulating

More information

UNDERFLOOR HEATING SYSTEM INSTALLATION MANUAL LIFETIME WARRANTY INSTALLATION MANUAL. Ideal for large areas. Easy to install

UNDERFLOOR HEATING SYSTEM INSTALLATION MANUAL LIFETIME WARRANTY INSTALLATION MANUAL. Ideal for large areas. Easy to install LIFETIME WARRANTY INSTALLATION MANUAL Ideal for large areas Easy to install Fully compliant to latest regulations CE approved Suitable for most floor coverings (always check with floor manufacturer) UNDERFLOOR

More information

Part Three Workmanship and Materials

Part Three Workmanship and Materials PART THREE WORKMANSHIP AND MATERIALS 1 PART THREE AMENDMENT RECORD Rev Date Description Engineer Approved 01 18/11/12 Issue AS MS 2 PART THREE CONTENTS 3.1 GENERAL... 4 3.2 HIGH VOLTAGE SWITCHGEAR... 5

More information

ACO Utility Enclosure Products

ACO Utility Enclosure Products ACO Utility Enclosure Products Rigid Plastic Pits ACO CABLEMATE EzyBrixx Leaflet EzyBrixx rigid twin wall plastic pits Comprising a system of interlocking units enabling custom sizes and shapes. ACO CABLEMATE

More information

RN Optical Termination Panel (RN OTP)

RN Optical Termination Panel (RN OTP) RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.

More information

Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Bell Mouth Terminal ends / Bell Mouth Cable Lugs

Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Bell Mouth Terminal ends / Bell Mouth Cable Lugs Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Bell Mouth Terminal ends / Bell Mouth Cable Lugs We manufacture and export Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth. Our

More information

C&G 2382 BS7671: th Edition IEE Wiring Regulations. 25 Questions

C&G 2382 BS7671: th Edition IEE Wiring Regulations. 25 Questions C&G 2382 BS7671:2008 17 th Edition IEE Wiring Regulations 25 Questions 1. BS7671 states that installation design must take into account a. current copper prices b. the effects of climate change c. a comparison

More information

Electric Service Standards

Electric Service Standards V: 1 of 6 A. Padmounted Requirements Complete requirements are contained in FPL specifications given to Customers for individual projects. Typical pad mounted transformer requirements include, but are

More information

Trench Duct Class Catalog 5230CT9601R10/08

Trench Duct Class Catalog 5230CT9601R10/08 5230CT9601R10/08 2009 Class 5230 CONTENTS Application.................................................5 Unassembled Trench Duct Components.........................6 Factory Assembled Trench Duct..............................11

More information

Wokingham Borough Council Street Lighting Design, Adoption Process and Specification Guide

Wokingham Borough Council Street Lighting Design, Adoption Process and Specification Guide Wokingham Borough Council Street Lighting Design, Adoption Process and Specification Guide 1. Design Process 1.1 All street lighting layouts and equipment specifications on new housing developments will

More information

RMF Intercell. NBS Specification 2013 K41

RMF Intercell. NBS Specification 2013 K41 RMF Intercell NBS Specification 2013 K41 InterfaceFLOR BV. K41 Specification 40mm, 60mm, 80mm, 90mm and 110mm K41 Raised access floors To be read with Preliminaries/ General conditions. TYPES OF RAISED

More information

BILL OF MATERIALS Name of the work: F.T.S Modernisation Work

BILL OF MATERIALS Name of the work: F.T.S Modernisation Work 1 BILL OF MATERIALS Name of the work: F.T.S Modernisation Work Erection,Testing and commissioning of Converter transformer 3 PH,11 KV/2 X 1800 V,4000 KVA outdoor Transformer size of 3150 L X 2800 D X 3200

More information

Delivering Reliability. Electrical Vaults. Power & Energy-Underground Structures

Delivering Reliability. Electrical Vaults. Power & Energy-Underground Structures A Delivering Reliability Electrical Vaults Power & Energy-Underground Structures A The Benefits of Precast Vaults Electrical vaults house power cables and transformers, and are a preferred alternative

More information

RS32 Multi-Section Skylight System under/over seam clip double diverter

RS32 Multi-Section Skylight System under/over seam clip double diverter INSTALLATION INSTRUCTIONS RS32-x RS32 Multi-Section Skylight System under/over seam clip double diverter www.rnssales.com sales@rnssales.com 805.375.3980 Fax 805.375.3981 SKYLIGHT ACRYLIC skyline series

More information

New Jersey Department of Transportation DATE : 10/21/10 PAGE : TABULATION OF BIDS

New Jersey Department of Transportation DATE : 10/21/10 PAGE : TABULATION OF BIDS PAGE : 133-1 CONTRACT TIME : 12/20/11 COMPLETION DATE CONTRACT DESCRIPTION : URBAN PROJECT(S) : BR-080-5(094) ROUTE 80 BRIDGE OVER ROUTE 287 NORTHBOUND AND SMITH ROAD GRADING, PAVING & STRUCTURRS CONTRACT

More information

UNDERGROUND SERVICES SECONDARY

UNDERGROUND SERVICES SECONDARY Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-

More information

PT. KABELINDO MURNI Tbk SHIPBOARD CABLE WIRE AND CABLE MANUFACTURER. No. EMS No. OSH No. QCS 00152

PT. KABELINDO MURNI Tbk SHIPBOARD CABLE WIRE AND CABLE MANUFACTURER. No. EMS No. OSH No. QCS 00152 PT. KABELINDO MURNI Tbk WIRE AND CABLE MANUFACTURER No. QCS 00152 No. OSH 00971 No. EMS 00151 Introduction of company The Company s history was marked by the founding of PT. Kabel Indonesia (Kabelindo)

More information

Specification for the Installation of Low Voltage Internal Mains and Services

Specification for the Installation of Low Voltage Internal Mains and Services 1. SCOPE This specification details the requirements for New Build and Remedial LV internal mains and services work, including the quality of materials, the installation methodology and general procedures

More information

Division 11 - Equipment Section 11401

Division 11 - Equipment Section 11401 PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included

More information

BUILDER S CONSTRUCTION SUPPLIES (Temporary in permanent position) REQUIREMENTS. March 2014

BUILDER S CONSTRUCTION SUPPLIES (Temporary in permanent position) REQUIREMENTS. March 2014 BUILDER S CONSTRUCTION SUPPLIES (Temporary in permanent position) REQUIREMENTS March 2014 Energy Safe Victoria (ESV) continues to receive complaints concerning defective builder s construction supplies.

More information

Armoured Instrumentation Cables to BS7917

Armoured Instrumentation Cables to BS7917 Armoured Instrumentation Cables to BS1 Fire Resistant, Pairs/Triples - Collectively Screened. Low Smoke Zero Halogen TAC, MGT, EPR, SCRN, ZH, GSWB, SW 0/0V Application Control and instrumentation cable

More information

Una e mpre sa Vi akab l e GLOSSARY.

Una e mpre sa Vi akab l e GLOSSARY. GLOSSARY www.centelsa.com.co CONDUCTORS Cu Copper conductors. CuSn Tinned copper conductor. ACDSR Rectangular soft bare copper wire. ACDSRP Paper insulated rectangular soft bare copper wire. ACDD Bare

More information

Veria Quickmat 1C 100/150W/m²

Veria Quickmat 1C 100/150W/m² Veria Quickmat 1C 100/150W/m² Installation guide Installationsanleitung Navodila za montažo Руководство по установке Instalãcija Instrukcija Manuel d installation Manuale di installazione Installatiehandleiding

More information

Aluminum Wiring. Facts and Figures

Aluminum Wiring. Facts and Figures Aluminum Wiring by Nick Gromicko and Kenton Shepard Between approximately 1965 and 1973, single-strand aluminum wiring was sometimes substituted for copper branch-circuit wiring in residential electrical

More information

Rubber profiles for driver's cabins Standard solutions Custom-made solutions

Rubber profiles for driver's cabins Standard solutions Custom-made solutions Product catalogue Rubber profiles for driver's cabins Standard solutions Custom-made solutions MADE BY PROFESSIONALS - DESIGNED FOR PROFESSIONALS 2 Rubber profiles for driver's cabins AS-KA profile solutions

More information

End of Life Recovery Options

End of Life Recovery Options Plastic Acetal (POM) Glides (Brooks) Recycled POM Acrylonitrile Butadiene Styrene (ABS) High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE, LLDPE) Amr Caps, Leg Cap Glide, Spacers (Insight

More information

ELECTRIC METERING GENERAL

ELECTRIC METERING GENERAL 1.0 INDEX 1.0 INDEX 2.0 SCOPE 3.0 GENERAL REQUIREMENTS 4.0 EQUIPMENT 5.0 METER REQUIREMENTS 6.0 METER FACILITIES 7.0 ELECTRICAL CONNECTIONS 2.0 SCOPE This guide covers general requirements and codes for

More information

INSTALLATION INSTRUCTIONS FOR ELECTRICAL CONTRACTORS

INSTALLATION INSTRUCTIONS FOR ELECTRICAL CONTRACTORS INSTALLATION INSTRUCTIONS FOR ELECTRICAL CONTRACTORS Rev. 1.5 1.10.13 Toll free (800) 288-6000 or www.hubbell-wiring.com P a g e 0 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING- When using

More information

Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths

Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths Datasheet ENGLISH Mineral Insulated Platinum Resistance Thermometer PT100 Sensor - Available in 3mm or 6mm diameter x 150mm or 250mm probe lengths High temperature, rugged, flexible Pt100 probe Suitable

More information

Company Replaces previous document Document ID Issue E.ON Elnät Sverige AB Ny engelsk utgåva D

Company Replaces previous document Document ID Issue E.ON Elnät Sverige AB Ny engelsk utgåva D Document type Page Verksamhetsstyrande 1 (5) Company Replaces previous document Document ID Issue E.ON Elnät Sverige AB Ny engelsk utgåva D17-0008968 1.0 Organisation Valid from Valid until Regionnätsaffärer

More information

Serv. Low-Voltage Cable Insulated Conductors for Overhead and Underground Distribution

Serv. Low-Voltage Cable Insulated Conductors for Overhead and Underground Distribution Serv Low-Voltage Cable Insulated Conductors for Overhead and Underground Distribution General Cable offers a complete line of insulated cable designs and sizes to meet utility requirements for exceptional

More information

Thermocouples and Accessories Product Catalog

Thermocouples and Accessories Product Catalog Thermocouples and Accessories Product Catalog 7282 N. Haggerty Rd. Canton, MI 48187 P. 734-451-8740 / F. 734-451-8741 www.inspec-inc.com 1 P a g e EXPERT CONTROL AND INSTRUMENTATION REPAIR Plastics Industry

More information

TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE

TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot

More information

Basic Requirements for Residential Electrical Installations

Basic Requirements for Residential Electrical Installations Basic Requirements for Residential Electrical Installations Wayne County Building Department 428 West Liberty Street Wooster, Ohio 44691 Phone: 330-287-5525 Fax: 330-287-5649 This brochure is intended

More information

TOP CAP Snaps into bottom track Aluminum - trimmed to length. RAMPS Covered by carpet ABS plastic and MDF QUESTIONS? CALL US AT !

TOP CAP Snaps into bottom track Aluminum - trimmed to length. RAMPS Covered by carpet ABS plastic and MDF QUESTIONS? CALL US AT ! IN-CARPET WIREWAY INSTALLATION GUIDE 2.7 These components are typical for each wireway installation: WALL BASE TRIM Finishes cable opening at wall BOTTOM TRACK Screws to concrete Aluminum - trimmed to

More information

PRIMARY LINE EXTENSION

PRIMARY LINE EXTENSION PRIMARY LINE EXTENSION Installation of new electric service to an empty parcel/lot or extending a transformer to within 150' of proposed meter location. This includes installing a permanent branch, addition,

More information

Concrete Masonry Unit Block Fill Installation and Estimating Guide

Concrete Masonry Unit Block Fill Installation and Estimating Guide Concrete Masonry Unit Block Fill Installation and Estimating Guide Required Equipment EQUIPMENT AND ACCESSORIES Same Proportioner, Hoses and Gun as used for Gaco s Open Cell and Closed Cell Foam. Pour

More information

Independent Consulting Engineers NV Zaegersgut Rd #13 tel +(599) Date: 25 januari 2008 Project: Troy Hill Saba Projectnr:

Independent Consulting Engineers NV Zaegersgut Rd #13 tel +(599) Date: 25 januari 2008 Project: Troy Hill Saba Projectnr: (Na) (Na) (Na) 1 Preparational works 1.1 Survey roads 1 sum 25,000.00 25,000.00 1.2 Clearing terrain roads 1 sum 45,000.00 45,000.00 Main 2 Earth work 2.1 Earth work 2.11 Excavate terrain 8900 m3 30.00

More information

Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing JACKETED /

Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing JACKETED / Multijacketed Tubing, Jacketed Tubing, Insulated Tubing 1 www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing Features 1/4 to 6 to 12 tubing sizes available in 316/316L stainless

More information

Rise of Earth Potential at Electricity Stations

Rise of Earth Potential at Electricity Stations ISIS practice For BT People TEPT/PPS/B012T Issue 7, 7-Dec-2007 Published by Openreach, NCAD Rise of Earth Potential at Electricity Stations About this document... About this document... Author The author

More information

IDEAL / ARTOS MACHINE SERIES

IDEAL / ARTOS MACHINE SERIES IDEAL / ARTOS MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: 45-048 45-725 45-064 45-774 45-065 45-940 45-700 / 45-705 Your Global Source for Wire Processing Perishable Tooling

More information

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR

-SQA- SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -SQA- SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 4110361 -Session- 1991-92 -Superclass- TH -Title- ELECTRICAL

More information

Uniclass L151:P7113 EPIC A41:X724. CI/SfB (17.1) Hn6. Plastic Piling

Uniclass L151:P7113 EPIC A41:X724. CI/SfB (17.1) Hn6. Plastic Piling Uniclass L151:P7113 EPIC A41:X724 CI/SfB (17.1) Hn6 Plastic Piling Introduction HL Plastics began manufacturing Plastic Piling in 1994 in Derbyshire and has consistently and constantly increased its share

More information

PREFA Aluminiumprodukte GmbH Page 1 of 25

PREFA Aluminiumprodukte GmbH Page 1 of 25 Tender Specifications 120901 PREFALZ Double Standing Seam_2012 ---------------------------------------------------------------------------------- 01. Text GENERAL PRELIMINARY REMARKS Roof ----------------------------------------------------------------------------------

More information

Thermocouple Quick Reference Guide. Aluminium Temperature Sensing Solutions from the Smelter to the Foundry

Thermocouple Quick Reference Guide. Aluminium Temperature Sensing Solutions from the Smelter to the Foundry Thermocouple Quick Reference Guide Aluminium Temperature Sensing Solutions from the Smelter to the Foundry why pyrotek? Pyrotek is a global engineering leader and innovator of technical solutions, integrated

More information

Plastic Piling Solutions

Plastic Piling Solutions Introduction Planet 14 Landscapes Ltd began supplying and installing plastic piling in 2009. One of our very first projects involved the stablisation of a bank around a moat for a private client. We are

More information

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series 3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.

More information

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100) ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society

More information

Abbreviations and definitions

Abbreviations and definitions Supply Regulations Table of contents Abbreviations and definitions 3 1. Introduction 4 2. Load carriers 5 3. Loading 6 3.1 Loading, general 6 3.2 Loading trolleys 6 3.3 Loading CC-containers 7 3.4 Specific

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999

The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999 CANADIAN ELECTRICAL CODE 1 The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999 Repealed by Chapter E-6.3 Reg 8 (effective June 24, 2003). Formerly Chapter E-6.3 Reg 6 (effective March

More information

ELECTRICAL SAFETY INSPECTION REPORT

ELECTRICAL SAFETY INSPECTION REPORT ELECTRICAL SAFETY INSPECTION REPORT ADVANCE WORLD LIMITED Lalkha Shair Char, Fatullah, Narayanganj, Dhaka, Bangladesh Factory List: 1.. Inspected by: Sherub Tenzin & Md. Moin Hasan Report Generated by:

More information

Therma Series Insulated Overhead Doors, by Northwest Door Section SECTIONAL DOORS Digicon Information Inc.

Therma Series Insulated Overhead Doors, by Northwest Door Section SECTIONAL DOORS Digicon Information Inc. Digicon Information Inc. Page 1 This section includes Model 650, 308, 308TM steel insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our

More information

CHAPTER 5 METERING REQUIREMENTS

CHAPTER 5 METERING REQUIREMENTS CHAPTER 5 METERING REQUIREMENTS CHAPTER 5 METERING REQUIREMENTS 5.1 General 1. All installations connected to, or intended to be connected to HK Electric s supply of electricity must comply with HK Electric

More information

PREFA Aluminiumprodukte GmbH Page 1 of 21

PREFA Aluminiumprodukte GmbH Page 1 of 21 Tender Specifications 120901 PREFA Shingles_2012 ---------------------------------------------------------------------------------- 01. Text GENERAL PRELIMINARY REMARKS Roof ----------------------------------------------------------------------------------

More information